Related
Please get the file http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
- Copy the file EnableCharPin.exe to you PDA
- Start the bonding dialog until you get the password screen
- Now launch the explorer and start the executable (you will get a small message)
- Get back to the password screen (if you don't find it click on the BT icon in the today screen)
- Characters are now enabled
To Gary: I replied to your mail but I get the following error: The destination server for this recipient could not be found in Domain Name Service (DNS). Please let me know if this solution works for you.
Best regards,
Tobias
i need your help with the bt patch
Hi,
I have downloaded the file from
http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
and looked for the exe file, to run in my xda2.
The exe is a PC installer (didn't work in my xda - not a valid win32 app...)
I finished the installtion process, and now in my add / remove programs i have "Bluetooth Character Password Enabler".
But when i'm trying to bond with my Navman,
still only numbers can be entered. :roll:
Any idea?
(maybe someone have the EXE to run on my ppc, not the installer?)
Thanks in advance,
Tomer
This is a bit unclear, I used towa´s patch like said earlier, followed exactly the instructions and could enable the charpin, and enable my navman
just download and COPY the patch to your xda true activ sync or whatever, and the start the bonding procedure, and when the screen for the pasword comes up, you lanch the explorer on your xda look for the charenable pin, click on it, it will give the message charpin now enabled, close the explorer and type in NAVMAN in big font, and it works perfect.
let us know if you got it to work
Thanks for you quick response.
I tried to do the process as explained:
copyed the file EnableCharPin.exe into my ppc
(via active sync), turned on my navman,
start BT, look for devices, found the navman gps one, next,
and now when the password screen appears i went to "my documents", clicked on the file, and than the error message 'EnableCharPin' is not a valid Pocket PC application" appears.
Any idea?
I saw a post in the forum about registry key or hack, to enable it,
whithout further information.
Thanks,
Tomer
Problem with EnableCharPin
The work that has gone into tying to solve the issue is impressive.
Unfortunately I have the same experience with the response 'EnableCharPin' is not a valid Pocket PC application'
Does anyone have a way to accomplish inputting alpha characters via changes in the registry?
ROM 1.52.00WWE date 10/23/03
Radio 1.05.15
Protocol 1337.15
ExtROM 1.52.86
Regional settings Swedish
Rgds
I have NAVMAN GPS and have the same error. Can anyone explain how is it possible that one can run Windows installer on XDA??
I have just installed this WIDCOMM BT manager. This thing at least is not asking for any pincode so I can easily establish the connection but later on i am not getting any data on the port. I am using ArcPad application by ESRI and I am supposed to use port 8 for GPS.
Can anyone tell me why there is no data comming thru the port?
Another problem is that the connection is lost after few minutes...
it works 4 me now
I did hard reset (upgraded my os / radio to 1.66.00 , 1.10.00)
disabled multilingual support,
installed the exe (FROM MY PC, NOT FROM THE DEVICE ITSELF),
and it solved the problem.
In the pairing process I managed to write NAVMAN (capital letters!),
without any problem
I hope it helps...
Tomer
Re: it works 4 me now
Hey Tomer !
Thanks for your tip. I have had problems with the connection, but I used your tip, and now it works perfect.
tomerbn said:
I did hard reset (upgraded my os / radio to 1.66.00 , 1.10.00)
disabled multilingual support,
installed the exe (FROM MY PC, NOT FROM THE DEVICE ITSELF),
and it solved the problem.
In the pairing process I managed to write NAVMAN (capital letters!),
without any problem
I hope it helps...
Tomer
Click to expand...
Click to collapse
Navman bonding
I dont have a problem getting the XDA II to bond with it, the problem I have is I can only select Com 7 in the Bluetooth tools menu and when I go to set up the GPS in Smartst it wont let me select Com 7.
Anyone have any ideas
I have a XDA and a Navmann 4100. A couple of weeks ago my Navmann dealer sent me the patch EnableCharPin & BTHTools1012 and I started the bond between the PPC and the 4100 and all went fine but a couple of days ago I suffered and full reset on the ppc and now I can not bond the ppc and the 4100 anymore.
Can someone tell what shall I do to bond once again the ppc and the 4100?
I have tried several times with the same process as before (EnableCharPin & BTHTools1012) but I had no succes, the ppc does not allow me to write Navmann, it only lets me write numbers.
towa said:
Please get the file http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
- Copy the file EnableCharPin.exe to you PDA
- Start the bonding dialog until you get the password screen
- Now launch the explorer and start the executable (you will get a small message)
- Get back to the password screen (if you don't find it click on the BT icon in the today screen)
- Characters are now enabled
To Gary: I replied to your mail but I get the following error: The destination server for this recipient could not be found in Domain Name Service (DNS). Please let me know if this solution works for you.
Best regards,
Tobias
Click to expand...
Click to collapse
I had this same problem when I had to do a hard reset with mine couldnt get it to rebond. The only way I managed it was to re install the character enable program. It seems to be specific on which order you do it unfortunately I cant remember what it was. I had to try it a few times myself for it to work.
The way I have managed to do it in the past is to make sure the PPC device is connected to your PC via active synch when you attempt to enter the characters (NAVMAN) That seems to in some way enable the enablecharaterpin software on the PPC. Let me know how you get on.
navman
probably the wrong place to ask but could that be used with the palm os ? ie charpin .exe
rudey wrote:
probably the wrong place to ask but could that be used with the palm os ? ie charpin .exe
Click to expand...
Click to collapse
Hi Rudey
Hard to say... I believe that a guy called towa wrote this for PPC, but if you look up his user name here and e-mail or PM him he might know
Hope that helps
Regards
Chris
Navman GPS One
Is it possible to get my 'old Navman GPS One' to work with my new Nokia N73?
Best regards
Martin
Enable CharPin
hi there
i tried a few links but i am unable to download Enable CharPin.zip from any for the link please can anyone help
many thanks
Hi boys
I have a question for you..
Can I load the T-Mobile Dash Rom on my HTC S620Pro unlocked?
I love the T-Mobile Dash Home screen theme and i f it's possible I want run it on my HTC S620 Excabilur
Thank you in advance for the answer
Yep but you might need to CID unlock (obtain SuperCID) which costs £20 ($39). If you just want the home screen just ask someone for it and copy it on. I would post it but I currently have the WM6 Dash ROM on my S620 and it probably doesn't have the home screen you mention.
I was wondering if anyone could help me.I have a HTCs620 and I am trying to flash it with the T-Mobile WM6 Rom.I have had the unit CID unlocked with IMEI Check and still I get the invalid model ID (something like that)I read something about upgrading the bootloader but where do I find this file for the HTC Excalibur......Any other suggestions since I have tried evereything else............
hope this helps
http://www.esnips.com/web/xdadevelopers
please post after a reply if its ok !!!1
bidinot said:
I was wondering if anyone could help me.I have a HTCs620 and I am trying to flash it with the T-Mobile WM6 Rom.I have had the unit CID unlocked with IMEI Check and still I get the invalid model ID (something like that)I read something about upgrading the bootloader but where do I find this file for the HTC Excalibur......Any other suggestions since I have tried evereything else............
Click to expand...
Click to collapse
There are different versions of Excalibur EXCA2xxx and ECXA1xxx
You could write an email to imeicheck and they will give you this solution regarding the invalid vendor id:
Tools you need:
===============
- HexWorkshop from http://www.bpsoft.com/downloads/-
the ROM of your choice
- Winzip or Winrar
- a valid UNL file for YOUR phone
Preparation:
============
a) install HexWorkshop and Winzip or Winrar on your pc
b) in explorer on pc, RIGHT click on the ROM of your choice and use: "Extract files to folder ..." from conext menu Now it will unpack all the files
c) in the new folder you will have ONE file like "HRUU_signed.NBH" (*.NBH) RIGHT click on the .NBH file and use: "Hex Edit with Hex Workshop" from context menu
d) You'll see on the 5th row EXCA20000 ==> !!! make it EXCA***** (5 stars) and save the file
e) Now RIGHT click on ROMUpdateUtility.exe and use: "Hex Edit with Hex Workshop" from conext menu
Search for word "BsaD5SeoA" (without quotes, case sensitive)
You'll find it around address 0x3FC6C ==> !!! replace "BsaD5SeoA" with "IMEICHECK" (without quotes) and save the file
ROM-Update:
===========
1) take SIM card and SD card OUT of the phone
2) Connect the phone running windows ce to the pc (normal way).
3) Completely Unlock your phone using our unlocker <== REALLY IMPORTANT
4) After phone is unlocked run unlocker (again) BUT when the unlocker ask for UNL file, remove the USB cable from the phone THEN press "Cancel" on the unlocker select file window (unlocker will close on PC). NOTE: The screen on the device will not show something usefull when in this mode. Most probably it is complete WHITE. !!THIS IS NORMAL!! Don't touch phone, let it like it is!
5) After you closed the unlocker, attach usb cable again (phone has still white screen)
6) start (the modified) ROMUpdateUtility.exe
7) when update finished and device started you will get a message: "Data Crashed, contact service provider" (!NO PANIC!) ==> Simply fix this problem by running the unlocker again and this time select the key file normal way (full unlock process again). In case you have problems please indicate the step letter/number which is not clear/not working for you. If you REALLY do it STEP by STEP exact like described you will have no problem.
Click to expand...
Click to collapse
Hello,
Thanks for the great guide.When I get to the part to look for the bsa file in the hex editor program I cant seem to find it.Also, when I save the hex editied files do I save them to the folder were I extracted the Rom.I tried to run the utility without editing the bsa file (because I could not find it) and when I tried running it after pulling the usb cord it gave me the error message Invalid Update Tool.Do you know of anyone who can edit the T-Mobile WM6 Rom for me even if I have to pay for it.....
One last question...the rom I am supposed to edit with hex editor is it the new Rom (t-Mobile WM6) or the bootloader upgrade Rom..
Thanks in advance!!
r0p3 said:
There are different versions of Excalibur EXCA2xxx and ECXA1xxx
You could write an email to imeicheck and they will give you this solution regarding the invalid vendor id:
Click to expand...
Click to collapse
Hi guys,
I'm trying to run a regedit program on my 02 XDA 11s.
I have tried several, and when I try to run the setup or exe I get the following message:
"There is no application associated with SETUP. Run the application first then open this file from within the application"
Any ideas, it must be something simple as I have tried several different programs and all experience this problem.
Thanks in advance,
Rob.
whats the file type ?
cab
exe if it's exe you should make sure it's not a pc activesync install
if it's zip
or rar
you should make sure that you have a unpacker for those 2
I think the program I tried to run was not for my mobile device.
Is there a stand-alone regedit program avaiable that I can download.
Thanks,
Rob.
http://www.phm.lu/Products/PocketPC/TaskMgr/
Many thanks.
I think I need to connect via the Sync cable and use the ActiceSync cable as most applications seem to have to be installed this way.
Thanks,
Rob.
I've read good reviews on chrismrulz's bootlaoder programe and I'm trying to use it to update my iPAQ 4700 from 2003 to WM6. However I am obviously doing something wrong as I just cannot get it to work!
Please can anyone offer any advice?
I hope I am following the exact instructions as mentioned here at http://forum.xda-developers.com/showthread.php?t=325727
and here is what is happening:
Step 1.
Make new folder in root directory.
No Problem c:\Bootloader set up.
Step 2.
Download WM6 ROM and bootloader into file.
Done as directed from links in instructions directly into new folder.
Checked and c:\Bootloader now has 2 files in it Bootloader.exe and WM6_4700_0_7_0_RELEASE4.rar
Step 3.
Put hx4700 in bootloader mode and place in sync cradle.
I assume I have done this correctly. Screen goes blank and you can just make out the HP logo it says USB when in cradle and shows version 1.01
Step 4.
Open bootloader and select image.
Ok I go to folder and double click on Bootloader.exe
I get a security warning about the software and ignor by pressing run.
2 things now happen simutaniously. Bootloader.exe expands and creates c:\Bootloader\Bootloader and fills it with more files and directories and....
I get a box asking me to select a file to flash ROM to my device. I change the directory back to C:\Bootloader and select WM6_4700_0_7_0_RELEASE4.rar and press open.
I get a message telling me to please wait the file is being extracted and inviting me to press ok. Before I can press ok the box is replaced with a winRAR Diagonistic Message saying c:\Bootloader\WM6_4700_0_7_0_RELEASE4.rar no files to extract.
I close this dialog box and get another message telling me to wait whilst it edits files. Then this in turn is replaced by a message saying Error reading file c:\Bootloader\Bootloader\temp_nbf\ I click on OK to acknowledge.
And that’s it nothing else happens.
I've obviously read the instructions wrong or something can anyone help point me in the right direction? Or offer any alternatives?
I'm using Active Sync 3.7.1
Thanks
Phil
Open the rar file (with WinRar), and read the instructions that are in the Readme.txt file... And update your Activesync to version 4.5, which is needed for WM6.
Excellent,
Thank you Ridolfo, so much easier than what I was trying to do. I now have WM6 working and am very pleased with it.
One problem i now have is Activesync 4.5 will not work with my Outlook 2002 I dont suppose anyone knows a workaround or do I have to buy a copy of Outlook 2007?
Phil3099 said:
Excellent,
Thank you Ridolfo, so much easier than what I was trying to do. I now have WM6 working and am very pleased with it.
One problem i now have is Activesync 4.5 will not work with my Outlook 2002 I dont suppose anyone knows a workaround or do I have to buy a copy of Outlook 2007?
Click to expand...
Click to collapse
Very strange indeed, my AS works fine with OL2002... Did you use the MS Office Update to get the latest servicepacks for OL ?
Dirk
Outlook 2002 now ok. I was havinag a bad day yesterday. Now if I can just find a way of viewing java enabled web pages I will be happy
Phil3099 said:
Outlook 2002 now ok. I was havinag a bad day yesterday. Now if I can just find a way of viewing java enabled web pages I will be happy
Click to expand...
Click to collapse
Try these .....
First install JBed, then Opera
Cheers
Dirk
Hi Dirlan,
Thank you for the files. I was already experimenting with Opera so I deleted it from my iPAQ loaded Cloudyfa_EsmertecJbed.cab and then reinstalled Opera.
Unfortunately I get an error message from Jbed saying "the file jbed cannot be opened. Either it is not signed or one of its components cannot be found.
Any ideas?
Phil
After extracting using WinRAR
Trying to upgrade from 2003 to WM6 ...
After extracting WM6_4700_0_7_0_RELEASE4.rar using WinRAR I am trying to follow the instructions in the readme.txt (as Bootloader didn't work for me as in the first post in this thread):
From readme.txt
To begin with if you want to flash your device using cradle,you have to:
1.In processes (CTRL+ALT+DEL) you must kill Wcesscom.exe
2.Then Enter in Bootloader (Contacts+iTask+Reset)
3.Put your device on usb cradle.
4.Run mtty11a.exe
5.In "Port" choose \\.\WCEUSBSH001 and click OK
6.Write command: lnb OS_WM6.nb0
7.Wait
8.Enjoy yourself
As I'm not all that familiar with this can someone explain in step-by-step what's involved with the mtty11a.exe application, and Step 6?
Currently my hx4700 is what I think in bootloader mode (Screen is dim an I can barely make out "USB" the hp logo and the current version "v1.01"). I previously tried the original WM5 upgrade and it just dies on me at 0.1%.
Hi tk2000
As I posted the original post I know exactly what you are going through. However once I went through the instructions you are currently trying to use every thing went smoothly. You have extracted the .rar file and are unsure of the mtty11a.exe file.
Assuming you have you have killed Wcesscom.exe on your pc as in step 1,
and the device in in its cradle in bootloader mode (as you described very faint HP logo, USB and version 1.01 displayed).
Then double click on the mtty11a.exe as in step 4. This then brings up an application and you will see a dropdown menu next to port, simply select the option \\.\WCEUSBSH001 and click ok.
6.Write command: lnb OS_WM6.nb0 now this stage I was a little unsure of myself I simply typed "lnb OS_WM6.nb0" in from the keyboard and pressed enter and it started to load. This takes a few minutes but afterwards you should have WM6 on your device.
I had to do a couple of hardware restarts and it took a few minutes in its cradle but it all works fine for me.
Phil3099 said:
Hi Dirlan,
Thank you for the files. I was already experimenting with Opera so I deleted it from my iPAQ loaded Cloudyfa_EsmertecJbed.cab and then reinstalled Opera.
Unfortunately I get an error message from Jbed saying "the file jbed cannot be opened. Either it is not signed or one of its components cannot be found.
Any ideas?
Phil
Click to expand...
Click to collapse
Hi Phil,
There should be an 'opera-unsigned*.cab' somewhere here on the forum. I didn't try it because Opera works fine for me.
Sorry
Dirk
Phil3099, I a followed the instructions exactly but I don't see a status bar on the pda. mtty showes the progress with lines of + but the 4700 stays on the hp logo screen with USB on top.
I am having problems with applications under Windows Mobile 5.0. When i try to run them i get the following error.
The file 'foo' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file.
1)Is there anyway of disabling the checks for trusted applications in Windows Mobile 5.0 on the Wizard?
I think this error becuz u r trying to run wm6 applications under wm5
vodovodo said:
I think this error becuz u r trying to run wm6 applications under wm5
Click to expand...
Click to collapse
I have same problem for BA wm 6.1 5.2.19199.1.0.0 PV DVH. Some people offered solution of HR. I don't agree with this. because we have to lose what we've been installing and spend more time re-installing them. so much time-wasting?
Any other solutions, please?!
Thanks in advance.
Problem may be cause of your SD card if u r using WM6. SD card PowerManagment value is set("DisablePowerManagment") to 0 in your registry. This means after a while your device will set your SD card power off for savg batttery. This cause to unread your program files etc while u start any program on your form your SD card device.
I fixed this problem like that;
By any registry editor:
Find the Path:
"Hkey_local_machine>drivers>sdcard>clientdrivers> class >SDMemory_Class"
after that find;
""DisablePowerManagement"" key and set its value to "1" than save and exit. Than soft reset your device. Problem will be fixed.
Sorry for my bad english.
Windows Mobile powered devices are shipped with default security settings.
The security model enables Mobile Operators to make post-production changes to security settings.
This can place significant restrictions on software which has not been signed and approved.
However you can change the default settings.
Take control of applications on your phone.
"All listed settings are decimal"
1. Connect the phone through ActiveSync.
2. Run your favorite remote registry editor "CeRegEditor (Download)" "Mobile Registry Editor (Download)" on your PC. http://ceregeditor.mdsoft.pl/
3. Navigate to HKEY_LOCAL_MACHINE\Security\Policies\Policies
Unsigned Prompt Policy:
This policy indicates whether the user is prompted to accept or reject unsigned .cab, theme, .dll and .exe files.
HKEY_LOCAL_MACHINE\Security\Policies\Policies
DWord = 0000101a Data = Use the following-->
0 = Indicates user will be prompted.
1 = Indicates user will not be prompted.
you will set that register decimal 1. that is solved problem
I have a HTC Tytn II and i get the same error. However, When trying to alter data using the reg editor you recommended, i found the 0000101a was already set to 1. Any other ideas?
Hi All,
Would someone be so kind to me a explain how I can move a package from the EXT directory or one Kitchen to the EXT directory on this version of kitchen.
I thought I could just simply copy the directory? So I had a go compiling a version of youtube from a different kitchen It would seem mot to work thou as I get the dreaded The file 'xx' cannot be opened. Ether it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring the file.
Any ideas how to get this to work?
Or look for the tool MsSigner, it can be found in most kitchens.
You'll be able to sign it with a signature that is accepted after you aply the enablyRapi and SPCCerts policies.
You're probably missing a key dependency package like dshow (mshow?) or concurrence manager. Also, make sure the shortcut path is valid. Lord knows why, but that's the message you get for bad shortcuts.
josephwsl said:
I am having problems with applications under Windows Mobile 5.0. When i try to run them i get the following error.
The file 'foo' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file.
1)Is there anyway of disabling the checks for trusted applications in Windows Mobile 5.0 on the Wizard?
Click to expand...
Click to collapse
maybe .NET CF is missing or not up-to-date?
RAMMANN said:
maybe .NET CF is missing or not up-to-date?
Click to expand...
Click to collapse
ahh i love you bro, u saved me an hassle i tried everything and it was the net.cf
damii said:
you will set that register decimal 1. that is solved problem
Click to expand...
Click to collapse
When I try that, I'm told I don't have the authority to access that. :-(
now what?
Yeah, me too!!!
All of a sudden too. Everything was fine then I got these certificate errors every time I try to run Haret.exe to run android. This happened last night. Did my provider change something on me?
I try to change that registry key and it won't let me.
Re:this post
I have same problem for BA wm 6.1 5.2.19199.1.0.0 PV DVH. Some people offered solution of HR. I don't agree with this. because we have to lose what we've been installing and spend more time re-installing them. so much time-wasting?
You need hard reset!
Same problem "certificate errors" and a hard reset wont work
Plz help
damii said:
Windows Mobile powered devices are shipped with default security settings.
The security model enables Mobile Operators to make post-production changes to security settings.
This can place significant restrictions on software which has not been signed and approved.
However you can change the default settings.
Take control of applications on your phone.
"All listed settings are decimal"
1. Connect the phone through ActiveSync.
2. Run your favorite remote registry editor "CeRegEditor (Download)" "Mobile Registry Editor (Download)" on your PC.
3. Navigate to HKEY_LOCAL_MACHINE\Security\Policies\Policies
Unsigned Prompt Policy:
This policy indicates whether the user is prompted to accept or reject unsigned .cab, theme, .dll and .exe files.
HKEY_LOCAL_MACHINE\Security\Policies\Policies
DWord = 0000101a Data = Use the following-->
0 = Indicates user will be prompted.
1 = Indicates user will not be prompted.
you will set that register decimal 1. that is solved problem
Click to expand...
Click to collapse
Thanks! That really helped me. You literally saved me a good night sleep. I was already desperate.
Wow, it works Thank you!!!
Awesome!!!
This worked perfectly. Thanks so much for the help. I've been racking my brain about this for over an hour now, then found this through a search.
Thanks!
OMG
I have the same problem and I tried :
1/ Hard Reset
2/ Rom Update
3/ installed NetCFv3.5
4/ editing values in the registry
what els ????!
plzz i need your help