Develop Bugs

Please Help, my Blue Angel Phone died.

Hi all,
First of all I want to thank you for your time.
I bought a Blue Angel device from a friend of mine but unfortunately I'm not so sure who made it.
It does have the bluetooth, camera on the back, wireless wifi, etc.
About a week ago, the phone function died. I verified that it wasn't the GSM card because when I moved the GSM (Cingular) to a different cell phone, it does work.
I then found out that from the device information, I only saw the ROM version, ROM date and ExtROM version BUT the Radio version and the Protocol version are blank.
I am attaching the devicedata.txt.
With that in mind, I have tried to upgrade the ROM and the Radio. I'm currently running the O2 ROM with the following information:
1. ROM version 1.12.62 WWE
2. ROM date: 10/04/04
3. Radio version: Blank
4. Protocol version: Blank
5. ExtROM version: 1.12.178 WWE.
When I tried to upload the Radio ROM, it seems to upload it, no error messages but still the radio version information is blank and my Blue Angel is still not recognizing as if the radio is off.
I tried to upload other ROM, like Imate PDA2k, Siemens SX66, etc but I couldn't because sometimes it kept complaining about country id or language id not correct.
I really appreciate any helps, inputs on this matter. I'm kind of dead on the water without my phone...
Thank you so very much,
Tambeng

Upgrade everything, not just the radio rom, you have a really old stuff running there...

Download upgrade from. clubimate.com and install it. But only of you have PDA2K.

I did try upgrade it to the following:
With that in mind, I have tried to upgrade the ROM and the Radio. I'm currently running the O2 ROM with the following information:
1. ROM version 1.12.62 WWE
2. ROM date: 10/04/04
3. Radio version: Blank
4. Protocol version: Blank
5. ExtROM version: 1.12.178 WWE.
But after the upgrade the Radio version and the Protocol version went blank again.
Do you think the fact that the radio version is blank is the cause of my phone to die?
Has anyone else since this issue before?
Thanks,
Tambeng

plemax said:
Download upgrade from. clubimate.com and install it. But only of you have PDA2K.
Click to expand...
Click to collapse
I tried to download but it says about the model is not correct.
btw: what does it mean by a ROM that says cooked?
Thanks,
Tambeng

No, no. Try to download from official website. What is your PDA call? It must be says some where on it.
btw: what does it mean by a ROM that says cooked?
Click to expand...
Click to collapse
It means that somebody made it by himself - not official. People take different parts from different ROMs and put them together into one ROM. You don't need things like this right now.

tambeng said:
Do you think the fact that the radio version is blank is the cause of my phone to die?
Click to expand...
Click to collapse
Very possible. What is wrong with your phone exactly? It's searching for signal or......?

It's actually really interesting that it didn't have any brand at all on it.
It just says, PocketPC on the top right corner. Can I identify the maker from the IMEA? I can share the IMEA number.
As for the phone, it doesn't even search for a signal at all. It just have the exclamation mark, like "!".
Thanks for your help,
Tambeng

looking for upgarde for the xda2i

I have a xda2i with the following info
ROM version 1.10.00 WWE
ROM date 12/24/04
radio version 1.00.00
protocol version 1337.39
ExtRom 1.10.124 WWE
I am looking a for a upgraded version if anyone can help... it would be great if there was a wa to get rid of the o2 custom stuff on the xda too i dont like that too much can anyone help
Acid

At the moment there are no updates for the XDA2i but there is rumours of one in the pipelines... if its true or not remains to be seen but we can only hope.
As for removing the customised crap just do a hard reset (you'll loose all your stuff) , press power + reset.
Then when its installing a box will appear asking "Personal" or "Corporate" user, choose the corporate option and enter the password "0506"

hi
at the moment the only newer rom from our factory rom is that of pda2k.. do a search for my posts and in there you will see where to get it and how to get past the country id error..

Danny-B- I didnt see the box will appear asking "Personal" or "Corporate" user it just says will customize my xda in 3 seconds and i cant do anything to stop it and i cant even uninstall the software it is linked into everything.. its really annoying and this o2 thing is just eating up memory and space... can you help
Acideax
I have a xda2i with the following info
ROM version 1.10.00 WWE
ROM date 12/24/04
radio version 1.00.00
protocol version 1337.39
ExtRom 1.10.124 WWE

Are you sure you didnt miss it ?
Im sure it auto installs personal user if not selected within a certain time.
The best thing to do would be, Hard reset it, then just sit and watch it install till it gets to the choice point.
Another thing that might be slowing your device down can be the SD card if its over 512Mb , the XDA 2i sems to have a slight problem with them and slows everything down, well it does in my case anyway.

rom
my xda2 i spec.
rom version-1.11.00 wwe
rom date-01/27/05
radio -1.00.00
protocol-1337.39
ext rom version-1.11.923 wwe

XDA2i & WM2005 ?!?
HI !
I´m using the XDA2i / O2-Germany with WM2003SE..
ROM 1.11.01GER
Ratio 1.03.00
Protokoll 1337.42
ExtROM 1.11.132GER
I´ve tried to upgrade to WM5 but...
HimaUpgradeUt.exe 1.2.0.0
nk.nbf 1.50f
WM 2003 ROM Image Editor 1.4.26
the firste tries I´ve got ERROR: wrong device, so I changed the devicetype from PH10 to PH10C like written on start-settings-deviceinformations...
I´ve tried again...
I started HimaUpgradeUt.exe and after a few sec. the screen say´s "deviceinformations: XXX
XXX
ROM XXX
Image info´s XXX
.....
if I press UPGRADE the massage "don´t remove USB & power" appiers then a new screen with the status for the upgradeprocess....
BUT... after 20 sec. I always get ERROR 101 (connectionerror).
- any idea ?

The XDA2i does not support the leaked WM2005 it only works on the XDA 2
Although the devices look the same the internal hardware is different.

The XDA2i does not support the leaked WM2005
sad to hear that...
ok, thank you but do you know if it´s possible to get an upgrade in the future ?
do you know where the problem is? (Image ore Updatesoftware?)
???!!!

The problem is that the software (wm2005) has to be custom made to suit the hardware in the phone so ... HTC - the makers of the phone or O2 would have to "build" the software for the phone.
Its because all the correct drivers and such have to be correct for the device to function.
But you never know, it might be a possible upgrade in the future, youll just have to wait and see.

Upgrade for XDA2i
Ok, I´ve found an original Upgrade-Tool & the Rom-files from o2UK....
My next Problem is the Password to edit the nk.nbf to chage the Image...
I´m using WM 2003 ROM Image Editor 1.4.26
Xda IIi ROM v 1.10.124 (43.6MB) - english
AlUpgradeUt.exe 2.0.0.1
when I start the upgrade I always get the
"ERROR 120: COUNTRY ID ERROR".... that´s because I have the
o2 - Germany device...
Can somebody help me to findout the right password for the Rom-editor ?
[/b]

imate jasjar rom updat????

hi
does any one know.... the clubimate initially posted a date of sept 30 but thats like half a month ago...and then no news..
i was wondering if any of you know>>>

They have released a new ROM. It's on the site. Go look on their site - http://www.clubimate.com

inspectorgadget ...the rom posted (though has a higher version than the ones shipped on the devices originally) but is actually the same version literally..the imate ppl by mistake put an arabic rom for jasjar as UPGRADE on their site which when used by many many ppl to upgrade led them to have a very expensive paper weight... the imate ppl then to correct their fault released the current rom (with a different version number to differentiate from shipped roms) so that those expensive paperweights could be used as pda's and phones again...
at that time when this debacle happened imate support ppl wrote on that very page that infact the correct rom UPDATE (not restore) would be released sept 30th....that date has come and gone half a month ago..and there is no official news on that jasjar support page anymore regarding the actual ROM UPDATE... hence my question here...

No it is not technically the same ROM. Try a search on the forum....you will see that they originally posted an arabic rom, then they posted the original rom to fix that mistake, and then they posted the new rom.
The rom version shipped with the device is:
Rom version: 1.12.00
Radio version: 1.03.00
ExtROM version: 1.12.132
And the new one:
Rom version: 1.13.53
Radio version: 1.03.01
ExtROM version: 1.13.137
I'm not sure what the new features are exactly, but I do know that the operator gprs/mms settings are now installed for you when you hard reset the phone, and there is an antivirus cab file too which you can install, but I lost mine.
There is also now application signing too, which is annoying, but can be disabled in the registry.
People say there is more free memory after the update...about 7mb I think.

hi
the antivirus **** cabs been on mine since start...and after unistalling the back gammon,antivirus and skype cabs after hard reset the newer versoin of the rom has infact 700kb less space than the original one shipped on my jasjar

Need Help Please on jasjar new rom
I loaded the new rom on my jasjar and my whole screen disappeared and I don't know how to bring it back to life.
I tried to reset in every way but it comes back to the same black screen and I'm not able to sync. I'm pulling my hair

antolinv said:
I loaded the new rom on my jasjar and my whole screen disappeared and I don't know how to bring it back to life.
I tried to reset in every way but it comes back to the same black screen and I'm not able to sync. I'm pulling my hair
Click to expand...
Click to collapse
1)dont panic
2)search for UNI_ExitBootloader.zip. run the exe in it to get the things back to normal. This often happens with g4 universal.
And yeah, make sure that the activesync is set not to listen the usb ports

jasjar is not seen on USB
I have the same problem with my Jas Jar, after trying to update.
I tried UNI_ExitBootloader.zip but unfortunately the connection with USB does not recognize the device. I checked the activesync connections settings many times, but the Jas jar is like dead. Is not recognised by the USB!!!!!
any suggestion......
kdskamal said:
1)dont panic
2)search for UNI_ExitBootloader.zip. run the exe in it to get the things back to normal. This often happens with g4 universal.
And yeah, make sure that the activesync is set not to listen the usb ports
Click to expand...
Click to collapse

I hate i-mate
I have tried to call them as well as emails with no positive response or care about their product, so I am going with these guys are really good try this ROM http://forum.xda-developers.com/showthread.php?t=421102 is really good and fast and in top of that is stable

Sync Error on ROM Update via ActiveSync

I am currently trying to upgrade my Rom from the standard O2 version to the XDA-DEV Special Edition.
I have done this many times before on other XDA 2i's however this one doesn't seem to like communicating. Activesync with syncronise all folders and connect quite happily however when i try to run the Special edition Rom setup MS-DOS box appears verify version and reports unknown internal error. then when the setup software starts it verifies your system requirments, you select next and then it reports the following in a GUI Box.
Cannot execute the remote communication program.
Please make sure that the USB/Serial cable is connected properly.
To try and get arount this i have put the XDA in Bootloader mode and then run setup but still comes back with the same error.
Any help or ideas would be appreciated
ROM Version 1.11.00 WWE
ROM Date 01/27/05
RADIO Version 1.00.00
PROTOCOL Version 1337.39
ExtROM Version 1.11.171 WWE

XDA-DEV Special Edition is a rather old rom only! for wallaby devices

Thats weird as i have had it running on a himalaya in the past. Is there a ready made upgrade rom for an XDA IIi available. Bored with the O2 one, to many restrictions.

then you are the first i ever heard about who have portet a rom from 1 pda device to another

Thaks for that, I have found one of PUGS with the O2 stuff stripped out.
See how it goes with that one.
Many Thanks

All device info gone ???

Hey,
I'm pretty new at this, so I'll explain how i've gotten in to this.
1. Bought a HTC tytn UK and I wanted it in dutch
2. Since I couldn't find an original rom i flashed it to the dutch rom from shap's (wich is actually great)
3. Then i did find an original rom but wasn't able to flash it so i used "HTC Hermes SIM & CID Unlock - v3a"
4. The original dutch rom works fine now, except when i go to device info
Rom version: empty
Rom date: empty
Radio version: empty
Protocol version: empty
CPU: 8 squars
speed: 6 squarsBe...
No imei number and so on.
Can someone please help me, maybe in the future when i try to sell the phone this must be ok.
Thx a lot to all xda developers here !!!
edit: original bootloader and ipl were: SPL-2.05 IPL-1.04 (maybe it has something to do with that?)

roeldm said:
Hey,
I'm pretty new at this, so I'll explain how i've gotten in to this.
1. Bought a HTC tytn UK and I wanted it in dutch
2. Since I couldn't find an original rom i flashed it to the dutch rom from shap's (wich is actually great)
3. Then i did find an original rom but wasn't able to flash it so i used "HTC Hermes SIM & CID Unlock - v3a"
4. The original dutch rom works fine now, except when i go to device info
Rom version: empty
Rom date: empty
Radio version: empty
Protocol version: empty
CPU: 8 squars
speed: 6 squarsBe...
No imei number and so on.
Can someone please help me, maybe in the future when i try to sell the phone this must be ok.
Thx a lot to all xda developers here !!!
edit: original bootloader and ipl were: SPL-2.05 IPL-1.04 (maybe it has something to do with that?)
Click to expand...
Click to collapse
1) you need to flash HardSPL
2) make sure you have flashed a new radio after using the CID/SIM unlocker, due to the fact that it downgrades it to a very old radio for it to work.

I had this issue when I tried a version of HTC Home Customizer that I found somewhere on the net.
To make it all come back, I had to hard reset, and not reinstall the program that caused it. I'm not sure if any other programs could cause that issue, or why it was caused.

I've flashed my device to HardSPL. now wich radio rom should I use?
I've found several radio rom but I don't have a clue wich one is best for me (Belgium, Mobistar)

flash a shipped ROM from here, there is a dutch HTC from there. get to boot loader, pressing the ok on the left, power on right, and stick stylus in at the same time. plug it to active sync, and run the exe file from the WM 6 rom upgrade/downgrade.