Develop Bugs

Unlocking Orange SPV M1000

Device Information:
OS: 3.66.1.200
ROM ersion: 1.66.00WWE
ROT date: 01/20/04
Radio versin: 1.10.00
Protocol version: 1337.18
ExtRom version: 1.66.200
after runing the .exe from my pc, the xda2unlock is under the program and when I run it it says:
start of repair process...
preparing modem ...
Failed to send ATZ
Please help

Hi,
I had the same error message and the cause was that I didn't have my phone connected to the pc via the cradle. Is your phone in the cradle and connected to the pc?

Software-Update failed (bootloader) and normal procedure

Hello,
i tried to update my mda pro to the latest version from t-mobile. The T-Mobile Programm return an
"error 201 get device data error".
If i try using the bootloader, the file MaUpgradeUt_noID return a screen with no current and new versions displayed.
USB connection in active sync is diasabled and i reach the boot-loader.
Any Idea?
This problem was mentioned here:
http://forum.xda-developers.com/viewtopic.php?t=19924
but nobody found an answer.
Current Versions:
Radio 1.06.00
G: 42.40.P8
D: 1.20.34

my tytn is dead!!! plss help!!!

i have been lookin' around to find help to unlock my tytn. Unfortunately everything i have done with the instructions found here were not helpful!
i do have a HTC Tytn with the following version:
ROM version: 1.18.260.2
ROM date: 07/22/06
Radio version: 1.03.03.10
Protocol version: 32.34.7010.01H
ExtROM version: 1.18.260.105
Model: HERM200
IMEI: 357719006002855
I’m using a XP Home Edition, 2002 version, and for some reason the HTC_Hermes_SIM_CID_Unlock_v3a does not start automatically.
I’ve tried already the manual steps and on the tri-colour screen appears 1.09.ds (which i guess is the bootloader) and if i connect the phone to the pc by the USB cable does nothing! Then i must reset, so that it can start up and i'm able to run the RUU_Hermes.... and appears an error (200): invalid update tool. Although the error is different from the one u mention on the forum i ignore and carry on with the process.
i run Herm_Unlock, click unlock and check both boxes to unlock (sim/cid) wait and seen the success message.
i soft reset or turn off and turn on with a diferent sim card (from another company) and appears a new message saying "u have tried 13 times, plz wait until the waiting time will be exceed..." (did I exceed the number of time permitted?) and from there, there is nothing i can do!!! Neither put the code: 22051978 as u mentioned in ur forum because the OK button is unavailable!!!!
I’ve tried many times and the last one has yesterday at around 11am until this morning nothing happen. This message does stills there!!!!!!!
i am sorry for been so long but i really need ur very usefullll helppppppp.
thankssssss so much!!!!!!!!!!!!!!!!!!!!
waiting for ur replay!!!!
chears,
MESO-HTC

o2 exec no radio, no protocol problem

I have just repaired the screen of my O2 EXEC but I cannot use it as a phone because it stucks when I enter my sim card in.I have checked in the device information and I noticed that there is no Radio and Protocol version.I am trying to reistall windows 6 but it stops and shows ERROR:114 Radio Rom Update Error Can somebody help me?Thanks

stavfil said:
I have just repaired the screen of my O2 EXEC but I cannot use it as a phone because it stucks when I enter my sim card in.I have checked in the device information and I noticed that there is no Radio and Protocol version.I am trying to reistall windows 6 but it stops and shows ERROR:114 Radio Rom Update Error Can somebody help me?Thanks
Click to expand...
Click to collapse
Look this:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal

[Q] I8160P Unlock

Hi guys, I was searching and browsing the whole forum, tried everything which I found but I can´t unlock SIM lock, can anybody help me?
I flashed to stock ROM with CSC for Czech Republic (XEZ) but phone still wants unlock code.
*#272*IMEI# is not working, but I installed CSC_Changer app and I see that I have correct CSC.
I have no idea what to do else. Please help.
Thank you very much

The solution is:
1. Root
2. usb debug: on
3. select z3x com port (mine is com151)
3. first stage: start with usb (using adb com150)
4. second stage: finish with uart (com151)
Searching Samsung USB Modem... Detected (COM150)
Model: GT-I8160
SW: ERROR
IMEI: 3517950506396161
Done with Samsung Tool ver 12.7
Android Version: 2.3.6
Model: GT-I8160
Product Code: GT-I8160OKATMH
Phone Version: I8160XXLD8
PDA Version: I8160XXLD8
CSC Version: I8160TMHLD2
IMEI: Unknown
Checking ROOT... TRUE
Reading Data From Phone... OK
Connecting to phone via COM151...
Bypass MSL... OK
Unlocking ... OK
Done with Samsung Tool ver 12.7
This method is copied from another forum from user dazexy.
Google it!

psychoo83 said:
The solution is:
1. Root
2. usb debug: on
3. select z3x com port (mine is com151)
3. first stage: start with usb (using adb com150)
4. second stage: finish with uart (com151)
Searching Samsung USB Modem... Detected (COM150)
Model: GT-I8160
SW: ERROR
IMEI: 3517950506396161
Done with Samsung Tool ver 12.7
Android Version: 2.3.6
Model: GT-I8160
Product Code: GT-I8160OKATMH
Phone Version: I8160XXLD8
PDA Version: I8160XXLD8
CSC Version: I8160TMHLD2
IMEI: Unknown
Checking ROOT... TRUE
Reading Data From Phone... OK
Connecting to phone via COM151...
Bypass MSL... OK
Unlocking ... OK
Done with Samsung Tool ver 12.7
This method is copied from another forum from user dazexy.
Google it!
Click to expand...
Click to collapse
Ok, sorry for not understanding the whole world, but I also tried z3x, but it wasn´t sucesful. Can you please describe how to work with z3x in that 3.3.4. points?
Thank you very much

The main reason for telling you to google it is because I also don't know. My phone was unbranded.
On that forum there were more people asking questions, and those questions may help you.
I found that information from google also
I don't even know what z3x is...

So guys, no idea how to unlock it by yourself?