I have just repaired the screen of my O2 EXEC but I cannot use it as a phone because it stucks when I enter my sim card in.I have checked in the device information and I noticed that there is no Radio and Protocol version.I am trying to reistall windows 6 but it stops and shows ERROR:114 Radio Rom Update Error Can somebody help me?Thanks
stavfil said:
I have just repaired the screen of my O2 EXEC but I cannot use it as a phone because it stucks when I enter my sim card in.I have checked in the device information and I noticed that there is no Radio and Protocol version.I am trying to reistall windows 6 but it stops and shows ERROR:114 Radio Rom Update Error Can somebody help me?Thanks
Click to expand...
Click to collapse
Look this:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Related
I upgraded...so I thought to this version...
Rom Version 4.01.16 eng
Rom Date 02/04/01
Radio Version 4.21.00
Protocol version 32s54 now I cant get into bootloader, cant use the phone, or internet on my SX-56...nor can I boot by flashing....What Have I done wrong should I just use it as a paper weight? Remeber If I press the power button and soft reset to just goes back to the Tmobile screen an continue to boot as a normal Alt-Ctrl-delete. I have tried xdairt and himayla..cant get it to work...
someone plz guide me through this I want my pda!!!!
Try the option fix-bootloader from the XDATools.
Then you should be able to enter the bootloader, and reflash your device...
HTH
Stefan
after XDA1 ugrade to 4.01.16 not able to do up/downgrade !
Have upgraded my XDA1 to ROM-version 4.01.16 Eng.
Now I wanted to install a different version, but I failed.
The PDA is working so far, but I can't upgrade/downgrade anymore.
When I use OSImageTool, there is a connection error displayed in the black command window:
ERROR: GetConnectionType - An existing connection was forcibly closed by the remote host. error getting connection type.
Can somebody please help me ?
Re: after XDA1 ugrade to 4.01.16 not able to do up/downgrade
Stefan_PDA said:
Have upgraded my XDA1 to ROM-version 4.01.16 Eng.
Now I wanted to install a different version, but I failed.
The PDA is working so far, but I can't upgrade/downgrade anymore.
When I use OSImageTool, there is a connection error displayed in the black command window:
ERROR: GetConnectionType - An existing connection was forcibly closed by the remote host. error getting connection type.
Can somebody please help me ?
Click to expand...
Click to collapse
There are many postings concerning this problem.....
You have to flash via SD-Card....
HTH
Stefan
Cant get into bootloader via pressing pwr botton and soft reset. I've have also hard reset the device and i still get nothing
Have you tried the fix-bootloader option from the xda-Tools?
Stefan
yes...but all i get is tthe command prompt...and i click yes is there something else i must do...tried edit2003 but still nothing
Cannot execute
Cannot execute "C:\DOCUME~1\Ovynten\LOCALS~1\Temp\Rar$EX00.203\RSUpgrade.exe"
wHAT THE [email protected]#$ DOES THIS MEANS? If uI could only understand this maybe I could get mt PDA working again.
I have an Atom Exec with ROM 20060721B1WWE, Radio RS00011. In the seeO2 website I saw an upgrade (Xda Atom Exec ROM Upgrade (ENG) 20060721B1WWE_RS00013) which is the same ROM but different Radio, supposed to improve quality of calls.
Anyway I went to upgrade it, followed the steps until it said it was uploading it and it would take up to 30 minutes. I went to do something else and when came back the pc screen was saying that the process finished successfully, saying that I had to do a hard reset of the Atom, wait for 30 seconds and then soft restart. I did all of that and all I got it's the O2 screen and doesn't go any further.
Following indication on this forum I launched the bootloader (camera button+reset), conected the usb cable, killed activesync and run again the updater.
The DSUU can see the Atom, says 'Device CE image version:0, Device Radio Image version: (blank) to CE Image version: 7210621, Radio Image version: R060822N_MN2ARC_RS00013.
When I click on Upgrade I get an Error message: Connection error, also on the Atom says '!!! Please use DSUU in OS mode and sync with Pc first !!! USB transfer Fail'
The only backup I did prior to this was using SPB Backup, nothing for the ROM. Is there any other way to upload the ROM?
From the Windows/Temp folder I got the files used by the DSUU:
Device Software Update Utility.exe
diskimage_Ver.nb0
EBOOT.nb0
ExtenderRom.img
nova_pda_033105.mot
vl1d_pda_Ver.mot
I've seen in other forums people recovering iPaqs or Axims using these files and software like romupdate, but I'm afraid it could get worse uploading the diskimage_Ver.nb0 as it is.
Anybody knows a workaround for this?
I ended copying diskimage_Ver.nb0 and eboot.nb0 to an miniSD card. Inserted it in the Atom and lauch the bootloader. It recognized the card and Rom file, started downloading it. After that I got few messages saying some files were missing.
Screen went blank and that's it. Now is completly dead, it won't restart or anything.
I'll have to send it to Hong Kong I guess.
hi to all
i have read the wiki of this blueangel,(but i dont found any solution)
this is the problem:
i have sim unlocked the BA, but when i put my sim card, the phone says "no service", and "unable to register on selected network"...all the times.
so, to "solve" this i did:
i update the room and the radio, with helmi room, and used the MaUpgradeUt_noID, to begin the update, i dont know if i am in the rigth way to solve the problem, but i have no more ideas...
another thing: sometimes when i turn on the device, at first screen(colored stripes screen) did not show number of the radio and another like G
and the worst: i have no backup of original room:
PH20B 0 B ESN N TELCE301 1.40.030 3, 1.40.178,1.12.00 12.00
PLSSS HELP ME!!!...
DARTHAS!SORRY FOR MY BAD ENGLISH)(
Newbie loses always the active sync connection just before updating its hermes from WM5 (OS 5.1.195 Build 14955.2.3.0) to the new WM6 (ENG Vers.). It's a MDA Vario II from T Mobile Germany (SIM unlocked!) and I have no clue what I am doing wrong - As soon as the progress bar starts to indicate the update my active sync connection goes down and of course I get the error message "failure connection".
Thx for any help! GeHu
I had the same exact problem. I can't pinpoint what exactly is going wrong (i just got my 8525 a few days ago, and decided to mess with it, so I'm a complete noob at this) but what I did was just use one of the repackaged versions. That did the trick for me D:
I am confused. If you mean you run a rom upgrade and then plug the phone in, then it is doing what it is supposed to do. You should fully sync your phone then run the rom upgrade. The upgrade will disconnect activesync and then put the phone into bootloader and run the upgrade.
gehu0003 said:
Newbie loses always the active sync connection just before updating its hermes from WM5 (OS 5.1.195 Build 14955.2.3.0) to the new WM6 (ENG Vers.). It's a MDA Vario II from T Mobile Germany (SIM unlocked!) and I have no clue what I am doing wrong - As soon as the progress bar starts to indicate the update my active sync connection goes down and of course I get the error message "failure connection".
Thx for any help! GeHu
Click to expand...
Click to collapse
It's an activesync problem. Either delete activesync and re-install it and then, try it again and it should work or try it on another computer
compudds said:
It's an activesync problem. Either delete activesync and re-install it and then, try it again and it should work or try it on another computer
Click to expand...
Click to collapse
Also make sure you have installed HardSPL first.
gehu0003 said:
Newbie loses always the active sync connection just before updating its hermes from WM5 (OS 5.1.195 Build 14955.2.3.0) to the new WM6 (ENG Vers.). It's a MDA Vario II from T Mobile Germany (SIM unlocked!) and I have no clue what I am doing wrong - As soon as the progress bar starts to indicate the update my active sync connection goes down and of course I get the error message "failure connection".
Thx for any help! GeHu
Click to expand...
Click to collapse
ok people notice how gehu0003 states "SIM unlocked!"......thus he most probably has a different bootloader.......1.40.olipro im willing to bet.
gehu0003...please do the following:
update to HardSPL v7 : This will make sure your SPL is up to date.
then
go to THIS THREAD....and download the DOPOD WM6 ROM. Use this repackaged ROM since it has CustomRUU which will recognise your updated SPL version. Enjoy.
thank u guys. i am fine now with the new HardSPL.
hey guys,
i'm having problems with this too, it disconnects me while i try to update to the hardspl.
any ideas?
thanks
how it worked for me
i had the same problem, while flashing rom, just before entering bootloader mode with some rom's it would disconnect and drop the usb conection. to fix it, now i enter the bootloader manually : press and hold (on) and (ok) buttons and reset with the pen. it should enter bootloader mode and in my case it doesn't drop usb conection to PC and allow me to reflash
cheers
Hello everyone, i am new to this forum, and I start with a really annoying problem
I have had an XDA orbit for a while on WM6, and i sent i back once becuase it started randomly turnign off then refused to turn on completly at one point. I then sent it back again after it was repaired, as it started to randomly power down again. However, this time I got a new orbit from O2.
However, my problem is that IO never see mto get signal :S all it does is keeps searching for signal, although occasionalyl when I do seem to get signal, it will nto make a call or sed any messages or the *#10# returns a "Failed" message. Withotu wanting to part from the phone again to get it repaired because I need it (and the GPS) in 8 days. I do kno that the simcard works because i re-tried it on my old old phone which has no problems with it and can make calls. Any adivce?
Stats:
O2 XDA Orbit (New out of box)
WM6
O2 Pay as you go Sim (With credit)
2GB Micro SD
IPL: 3.04.0001
SPL: 3.04.0000
GSM: 02.67.90
OS: 3.4.0.0
oh, and if anyone else can help me on this it would be appreciated aswell. Whenever i try to install the drivers for the phone on my computer, it fails as it says i have a more recent version of Vista Mobile Device Cetner, and i cannot get the SD card or its contents to appear on my computer.
Many thanks in advance
~Fribble