Develop Bugs

ROM Upgrade of Imate-Jam (O2 XDA2 Mini) Failure, HELP!!!

Dear all,
I just got my imate jam (sold in Telstra shop in Australia) on last Friday, yesterday, I tried to upgrade the ROM as followed the instructions from http://www.clubimate.com/.
As imate jam has only one USB port which is connected to PC (Microsoft Active Sync 3.8) and there is no cradle, only 30s after I tried to update the ROM, then the USB is disconnected suddenly, and after that my Imate Jam has a black screen (it's like the backlight has been set to the lowest setting). I can see the word Serial 1.0, and if I try to connect to the USB again, it will display USB 1.0. Nothing more than that. Soft or Hard Reset doesn't change anything
Anyone knows how to bring it back to life, otherwise, I will return to the Shop since I only bought it for 3 days, hopefully, they will give me a new unit to replace this "dead" Jam :evil:
When I did the upgrade, the battery is at 100%, so there is enough power, but I can't understand why.
The ROM & Instruction are download from the page
http://www.clubimate.com/index.asp?PageAction=JAM
I've downloaded the Generic version of the ROM with the name ma_cdlsku1_wwe_10300_143_10100_ship.exe (28 MB)
with the following information :
The details of the current ROM image (found under Start -> Settings -> Device Info):
Rom version 1.03.00 WWE
Radio version 1.01.00
ExtROM version 1.03.143 WWE (Generic)
(PS. Sorry you may not be able to see that particular page and instruction if you are not a member for that site)
Any suggestions are highly appreciated.
Cheers
Wallace
PS. One more question, how likely is it for the Imate Jam / O2 XDA2 Mini to upgrade to Windows 2005 Mobile once it is available??

You are luckily in the Bootloader mode. I crashed during my PDA2K upgrade and found settings to get it into Bootloader mode and the upgrade was able to rerun and put the ROMs back in place. Try disconnecting, rebooting your PC (start clean), then, with the Jam in Bootloader mode still, relaunch the upgrade utility. Let me know if that works.
Also, do a search here on how to get the Bootloader to launch on your JAM if you need to pull your battery and power it back up again to it.

Oops ...
I've returned my imate Jam to the shop, and for some reason, they can do a hard reset on the phone (which I tried to press the power button and the reset buttons many times before), and so the screen comes up ...
And of course I told them I lost confidence in the phone blah blah ... and I want to replace a new phone ... So now they have sent my phone back to Telstra and need the Telecom's approval for a replacement unit ...
Once they approve it (it takes a week they said), I will ask for an O2 XDAII Mini instead. As in Australia, the imate phone has been customized by Telstra so it will by default shows the ugly logo of Telstra, whereas O2 will still display O2, and it has the options to choose which provider under "programs" ...
In the first 2 days, I need to soft reset the imate jam quite a number of times, I set the password so after the phone is unused, it will be locked ... but sometimes when I tried to unlock it, I couldn't ... I mean the number pad (virtually in the screen) has no reaction when I pressed it ... so I was forced to reset the imate jam a number of times, I suspect it might be problems from Telstra's customisation to the phone, but anything can happen so I just guess ...
Hope to get a new replacement phone soon ... as I only got the phone for 3 days ...

Unable to start the wifi module... :(

Hi everybody,
i´m an spanish guy who owns a BlueAngel (exactly a TMobile MDA) thas was functioning properly, without problems.
Yesterday, after releasing the PDA from its cradle, I started to have this error message: "UNKNOWN CARD IN SOCKET 1 - Enter the name of the device driver for this card. For information, see the card manufacturer´s documentation"
And the message appears even if there´s a SD card inserted or not... and I´VE NOT WIFI. You can try so much times and nothing happens... the icon shows no wifi, and no dialog box appears, as it was usual.
It seems the PDA don´t recognize the wifi module... as if it was turned off...
I´ve updated to the latest ROM, latest radio etc... (i´ve not tried with WM2005 yet) and this happens again and again...
And in the spanish SAT they have not idea of why this is happening!!!! :shock: :?
Please help me... i´m getting desperated...
Thanks so much in advance!!!!
Un saludo

no network after upgrading to WM5 ... any help

Hello people ..
I updated my T-mobile MDAIII from windows 2003 to "WM5"
it worked ok & looks cool but I can't connect to the network
& it work just as a PDA not a phone
also when I open "SIM manager" nothing happen & it doesn't open
even when I opend phone & dialed "*#06#" to retrive IMEI it hanged & I had to reset it & didn't show the IMEI#
I noticed also that it doesn't retrive the call duration & read "unknown" in both Incoming & Outgoing
also my phone has 128MB RAM, now it reads 96MB, is that normal with the new version ??
when I reset or hard reset it writes:
"No GSM
D 5.35.04. WWE"
1- if I updated to WM6, will it correct the problem?
2- is "No GSM" means it's not able to connect to a network
3- how I can reactivate the GSM service or connect to the network
Thank you for your help

Not an expert here but with the help from a member here (m a j u) both me and my brother in-law have successful upgrade our SX66 to WM5.
Try a soft reset (use the stylus to activate reset button) on your device everytime after you remove the battery, it work for both of us and should work for you.

Reset till the radio versions show.
Also some dialpad themes seem to cause issues with the phone (I had a problem with iphone theme for dialpad).

reflash radio rom

I'll try the re-flash method too. I've been having problems with a scheduled profile starting up the phone radio in the morning automatically. At night I turn it off but it doesnt come on in the morning, even though I know the profile comes on at the selected time.

Timofox said:
Hello people ..
I updated my T-mobile MDAIII from windows 2003.....
Thank you for your help
Click to expand...
Click to collapse
Hi, Make sure you have Radio Rom 1.15.00 and none of your profile turns the 'Phone' off automatically.

Problem with new O2 Orbit

Hello everyone, i am new to this forum, and I start with a really annoying problem
I have had an XDA orbit for a while on WM6, and i sent i back once becuase it started randomly turnign off then refused to turn on completly at one point. I then sent it back again after it was repaired, as it started to randomly power down again. However, this time I got a new orbit from O2.
However, my problem is that IO never see mto get signal :S all it does is keeps searching for signal, although occasionalyl when I do seem to get signal, it will nto make a call or sed any messages or the *#10# returns a "Failed" message. Withotu wanting to part from the phone again to get it repaired because I need it (and the GPS) in 8 days. I do kno that the simcard works because i re-tried it on my old old phone which has no problems with it and can make calls. Any adivce?
Stats:
O2 XDA Orbit (New out of box)
WM6
O2 Pay as you go Sim (With credit)
2GB Micro SD
IPL: 3.04.0001
SPL: 3.04.0000
GSM: 02.67.90
OS: 3.4.0.0
oh, and if anyone else can help me on this it would be appreciated aswell. Whenever i try to install the drivers for the phone on my computer, it fails as it says i have a more recent version of Vista Mobile Device Cetner, and i cannot get the SD card or its contents to appear on my computer.
Many thanks in advance
~Fribble

Qtek 9090 wont upgrade

Hi i am new on this forum ,i have a qtek 9090 unlocked bought on ebay
it runs windows 2003 and when i try to upgrade to wm6 ,the process starts and and it goes into USB V2.08 and pc makes a usb has been removed sound and the installer gives me a error msg
ERROR 120:COUNTRY ID: ERROR
and when i do a soft reset it comes up with a new installtion of (wm2003 which i hate)
this is getting to my head as i need to upgrade my PDA
can anyone help me
send me some links with the correct software and stuff please

you need to put the device in bootloader mode before connecting it to the pc by pressing reset+power+record and use the MAupgradeut_noID instead of the BAupgradeut to upgrade your device. if you don't have the MAupgrade tool present, you can download it from this post of mine:
http://forum.xda-developers.com/showpost.php?p=3768875&postcount=3
by doing these 2 points, you can avoid all error 101, 110 and 120

windows 6 for qtek 9090
does anyone have links to the new wm6 for qtek 9090

try this: http://forum.xda-developers.com/showthread.php?t=482997

No service
upgrade done and the phone worked for about 3 days now is says no service and wont pick a network

first make sure you didn't soft-reset the device the wrong way, meaning restarting the device by releasing the battery lock, because restarting it like that generally starts the device w/o radio, meaning no phone function. to avoid that, simply soft reset again by pressing the actual hardware reset pin.
in second thought, you might wanna post the values shown in the boot screen, maybe another radio rom might do the trick.
if neither of that worked, maybe you should try another sim card or a different location for testing network coverage just to figure out, if it might have something to do with a network failure.
if still however nothing worked, which i wouldn't hope, it still could be a bug with the particular rom and you might try another rom.
and at last, if that didn't help, you might have a broken radio receiver and as a harware fault would require you to repair or replace the device, but that is rather unlikely, so you are probably lucky and can fix it yourself.
please post back if and when you figured out, what the problem was, so we can all profit and learn off it.
with best regards,
Chef_Tony