Related
I have a qtek 2020 with v1.52 rom. I downloaded the new Italian rom (1.72.04ITA) from www.windowsmobile.it and I tried to upgrade it.
After erasing internal rom the upgrade process stopped with a fault message:
Error 112: ce rom update error
Now the display is dark. I can read “serial” or “USB” on it.
What’s happened?
I tried again 10 times but nothing.
It seems that connection between pc and qtek wasn’t correctly established. This because the little activesync icon (bottom right) is now always gray, never green.
Help me please!
Hm...
When OS is not started, PC ActiveSync cannot connect to your device, i think this is indeed...
But open Windows Task Manager and kill process wcescomm.exe (this is that tray icon of ActiveSync) and try to run update again...
HTH
> open Windows Task Manager and kill process
> wcescomm.exe and try to run update again
I tried but nothing.
I also tried to execute XDAtools but I recieved the following message:
Cannot execute the remote communication program.
Please make sure that USB/Serial cable is properly connected.
What can I do?
Does your device changes the screen from "Serial... blablabla..." to "USB... blablabla..." when you put it into cradle?
If so, what update writes when you try to run it (after putting device into cradle and killing activesync)?
> Does your device changes the screen from
> "Serial... blablabla..." to "USB... blablabla..."
> when you put it into cradle?
Exactly
> If so, what update writes when you try to run it
> (after putting device into cradle and killing ActiveSync)?
I can read following messages:
* Message 1 *
Cheking info on your pocket pc. Please don’t disconnect.
-----------------------------
* Message 2 *
Your pocket pc software is about to be update from:
Device CE image version: (now this is blank, the first time I attempted the upgrade was 1.52.00ITA)
Device CE extended image version: (now is blank, first time was 1.52.93)
Device Radio image version: (now is blank, first time was 1.06.1)
To
CE image version : 1.72.04
Extended image version: 1.72.128
Radio image version: 1.14.00
-----------------------------
* Message 3 *
The current software is being erased
Stage1: erasing ROM. Please wait
(But bar will stay at 0%)
-----------------------------
* Message 4 *
(After 2 minutes)
Error 112: ce rom update error
Any ideas?
Stupid question, but do you have pluged charger to cradle? I assume that so...
On other hand, I searched through this forum and found this links:
http://forum.xda-developers.com/viewtopic.php?t=10333
http://forum.xda-developers.com/viewtopic.php?t=8835
HTH
I tried, but nothing.
Anyway thank you for your reply
Hm... I was solving this issue yesterday and try to download update again (some corruption may come when update is downloaded) and flash it again...
I did it. I downloaded and tried also other international rom version, but nothing to do.
I’m going to call the costumer service ...
This is strange... :evil:
Unhappy, we are so far from each other... I want to help you...
Do you by chance have your cradle plugged into a USB hub? There have been many reports of problems in this configuration.
If so, try it with the QTek cradle plugged directly into the computer.
If not, a call to the service center may well be in order.
> we are so far from each other...
> I want to help you
You are very kind. But I live in Rome ...
> have your cradle plugged into a USB hub?
No, it is plugged directly into pc
Service center seems to be the only chance
:roll:
Me too..
Hi!
Just experienced the exact same thing :-(
I hate it!
I has done it one time before, and then I had to send it in to be repared. I dont know what they do, but I got it back working again.
But now when I saw the new official 1.72 rom, I wanted to give it another try.... but... now its dead again, doing the exact same thing as yours...
any news?
Regards
Peter.
You are very unlucky.
Today I’m going to call service center.
I hope they’ll solve problems quickly.
I’ll tell you what’s goin’ on.
Working!
hey!
I actually got it back to life!!
I took a different PC, connected my qtek and just started the upgraded again, even though the activesync wasnt connected. It started to upgrade, and my Qtek is now back to normal with 1.72!
Try if you can, with af different PC...
Today my service center replyied to my email regarding this, sayning that they couldnt help my, and there was no guarantee since i tryied to upgrade my self :-(
So, good thing i did it my self
I was thinking about it because I had some problems with usb ports on my pc. So this morning I tried the upgrade from another pc and ... YEEEAH.
I make it !!!
Now qtek 2020 works again !!!
Yeah!
Congratulations!
Good thing we have this forum
Experienced any problems with the upgrade yet?
yes.
still problems with bluetooth connection: no signal available from gps reciever. :shock:
problem solved by downloading bluetooth tools from:
http://bluetooth.i-networx.de/index_e.html :idea:
now it works fine.
bye
hi,
i just received my o2 xda 2, i decided to upgrade to 1.60 when i saw 1.72 it's out:
1st quest:
where could i find 1.72?
Does the qtek one works with my xda?
thnx
ciao mario!!come ti va col gps BT e tomtom3?
Hi!
I would definetly not try to do any upgrade as long as the upgrade isnt directly comming from your service center. All the XDA upgrades I tryied on my Qtek didnt work at all...!
Be carefull!
I upgraded...so I thought to this version...
Rom Version 4.01.16 eng
Rom Date 02/04/01
Radio Version 4.21.00
Protocol version 32s54 now I cant get into bootloader, cant use the phone, or internet on my SX-56...nor can I boot by flashing....What Have I done wrong should I just use it as a paper weight? Remeber If I press the power button and soft reset to just goes back to the Tmobile screen an continue to boot as a normal Alt-Ctrl-delete. I have tried xdairt and himayla..cant get it to work...
someone plz guide me through this I want my pda!!!!
Try the option fix-bootloader from the XDATools.
Then you should be able to enter the bootloader, and reflash your device...
HTH
Stefan
after XDA1 ugrade to 4.01.16 not able to do up/downgrade !
Have upgraded my XDA1 to ROM-version 4.01.16 Eng.
Now I wanted to install a different version, but I failed.
The PDA is working so far, but I can't upgrade/downgrade anymore.
When I use OSImageTool, there is a connection error displayed in the black command window:
ERROR: GetConnectionType - An existing connection was forcibly closed by the remote host. error getting connection type.
Can somebody please help me ?
Re: after XDA1 ugrade to 4.01.16 not able to do up/downgrade
Stefan_PDA said:
Have upgraded my XDA1 to ROM-version 4.01.16 Eng.
Now I wanted to install a different version, but I failed.
The PDA is working so far, but I can't upgrade/downgrade anymore.
When I use OSImageTool, there is a connection error displayed in the black command window:
ERROR: GetConnectionType - An existing connection was forcibly closed by the remote host. error getting connection type.
Can somebody please help me ?
Click to expand...
Click to collapse
There are many postings concerning this problem.....
You have to flash via SD-Card....
HTH
Stefan
Cant get into bootloader via pressing pwr botton and soft reset. I've have also hard reset the device and i still get nothing
Have you tried the fix-bootloader option from the xda-Tools?
Stefan
yes...but all i get is tthe command prompt...and i click yes is there something else i must do...tried edit2003 but still nothing
Cannot execute
Cannot execute "C:\DOCUME~1\Ovynten\LOCALS~1\Temp\Rar$EX00.203\RSUpgrade.exe"
wHAT THE [email protected]#$ DOES THIS MEANS? If uI could only understand this maybe I could get mt PDA working again.
I have an Atom Exec with ROM 20060721B1WWE, Radio RS00011. In the seeO2 website I saw an upgrade (Xda Atom Exec ROM Upgrade (ENG) 20060721B1WWE_RS00013) which is the same ROM but different Radio, supposed to improve quality of calls.
Anyway I went to upgrade it, followed the steps until it said it was uploading it and it would take up to 30 minutes. I went to do something else and when came back the pc screen was saying that the process finished successfully, saying that I had to do a hard reset of the Atom, wait for 30 seconds and then soft restart. I did all of that and all I got it's the O2 screen and doesn't go any further.
Following indication on this forum I launched the bootloader (camera button+reset), conected the usb cable, killed activesync and run again the updater.
The DSUU can see the Atom, says 'Device CE image version:0, Device Radio Image version: (blank) to CE Image version: 7210621, Radio Image version: R060822N_MN2ARC_RS00013.
When I click on Upgrade I get an Error message: Connection error, also on the Atom says '!!! Please use DSUU in OS mode and sync with Pc first !!! USB transfer Fail'
The only backup I did prior to this was using SPB Backup, nothing for the ROM. Is there any other way to upload the ROM?
From the Windows/Temp folder I got the files used by the DSUU:
Device Software Update Utility.exe
diskimage_Ver.nb0
EBOOT.nb0
ExtenderRom.img
nova_pda_033105.mot
vl1d_pda_Ver.mot
I've seen in other forums people recovering iPaqs or Axims using these files and software like romupdate, but I'm afraid it could get worse uploading the diskimage_Ver.nb0 as it is.
Anybody knows a workaround for this?
I ended copying diskimage_Ver.nb0 and eboot.nb0 to an miniSD card. Inserted it in the Atom and lauch the bootloader. It recognized the card and Rom file, started downloading it. After that I got few messages saying some files were missing.
Screen went blank and that's it. Now is completly dead, it won't restart or anything.
I'll have to send it to Hong Kong I guess.
I'm running Vista and when I wanted to run the bootloader upgrade on my Dash I kept getting this message error. Error 260. anybody find any way around it? I've tried to manually set th ephone into bootloader mode, same result. help!! PS the error is supposed to mean "port already open" or "open port error" I'd really appreciate any help!
erro 260 - fixed
switches to my wife's laptop that had XP on and it worked like a charm. I'd be glad to assist anybody in the process od de-branding their Dash. Removing the ugly T-mobile paint logo on the unit was easy too.
ERROR 260
Sorry for thislong story....
OK, I've been on looking around the site for a while. I installed the WM6 Beta. I was looking for two days for the WM5 ROM only because I want the little things to work. Finally found it. But now every time I try to flash my phone ack to WM5 bI keep getting the 260 connection error. The readme only says to restart the comp and phone and try again. I have literally, no joke, done this 12 times in the last 2 hours, hoping maybe it will go. All the phone does is go to the green, blue, and red screen and stays there. Then the comp says it gets the error. I know it's connected because Sync Center syncs, I can look through the phone, install apps from my comp, etc. Also I tried doing the 'Update only' rom for version 1.11 or so, and it starts to go but then says its the wrong version RUU. Has anyone had this problem before? Flashing to WM6 did this once and then worked after.
I'm running Vista Premium, stock sync cable, Microsoft Sync Center for vista. All this is the sameas when I flashed to WM6.
There goes another 3 attempts, trying to change timing, reinstalling Sync Center, etc.
Decided to try it on my XP desktop, and for some reason, first time it worked. Maybe Vista didn't like it? Who knows..
Mladito Vista!!
Hi there,
I have the same little problem here!!!! I have a laptop with Vista (garbage)... so i´ll try on a laptop running XP...thank you for posting this, it was a big help..i let you know how it turns out... see you around
WM5 to WM6 --> Problems at 3%
Hi all,
I've errors upgrading my phone to WM6.
I Can open the Wizard (it`s a generic to S620/S621), but in 3% i`ve an error.
I think thats my phone has a blocked CID.
How can i unlock this? i`ve tryed with tools to unlock, but without success...
Regards,
Emerson
Hello,
Welcome to the forum.
Your problem is that your phone is CID-Locked. Hence, you'd need to use a paid service to unlock it. I personally used the following service which provides instant unlocking:
http://www.gsmliberty.net/shop/htc-excalibur-instant-remote-unlock-p-1452.html
I used a credit card, it's 39.99 $ - I was done unlocking and upgrading to Windows Mobile 6 in about 15-20 minutes.
Good Luck !
P.S:
Steps to install WM6
- First CID/SIM Unlock using GSM Liberty
- Flash Bootloader
- Install WM6 ROM (It will take some time for it to load so give it about 5-10 mins. it does get stuck at the boot screen for sometime but eventually it'll load)
- Install Office/Audio Manager
- Application Unlock your phone using SDA Application Unlocker
- Install the necessary software/tweak/hacks
there you go, if you have any questions, feel free to ask. also, if you use the search function, everything's available here.
Good Luck !
Here's the following links you require
1) Flash Bootloader
ftp://xda:[email protected]
2)here's the WM6 ROM:
http://files-upload.com/files/472108....90_Ship.ex e
here's office for those who want it:
http://rapidshare.com/files/31706137/Office.WM6.zip
here's Htc Audio Manager for those who want it:
http://forum.xda-developers.com/atta...1&d=1183909664
Ps. I better like German flash, it's smaller due to fewer language packs, and contains English, here: http://files-upload.com/files/472422....90_Ship.exe
thanks to jsp_m for the links.
Hi,
I`ve problems because my IMEI is from Brazil...
And in the site accept only 15 digits IMEI..
My imei is: 35*************02 (17 Digits IMEI)
Thanks,
Emerson
hey,
that's not a problem. everyone has 17 digits, don't include the last 2 digits when you type in your IMEI so for example
11111111111111102
just include the first 15 and submit and you'll get an unlock link in your e-mail, follow that link, scroll down to the page to download dashunlock software and download the .UNL file for your IMEI and then make sure ur phone is connected to active sync and it's green, open the dash-unlock program and then hit enter then it'll ask for the .UNL file, locate it and open it and your good to go - your phone will be unlocked then soft reset it or i think it's automatic and everything's set.
good luck !
p.s: in other words, don't include 02 when you type in your IMEI.
HTC Audio Manager
http://forum.xda-developers.com/showpost.php?p=1355010&postcount=5
Thanks!
I'll Try NOW and let all know...
Regards,
Emerson
Arrghhh!!
My phone still give the message:
Invalid Model ID [244]....
And now? i`ve payed 40 bucks for an unlock software....
Thanks,
Regards,
tatarezende said:
Arrghhh!!
My phone still give the message:
Invalid Model ID [244]....
And now? i`ve payed 40 bucks for an unlock software....
Thanks,
Regards,
Click to expand...
Click to collapse
Emerson;
Read the second post from luckybandit on this thread. That´s exactly what to do to get rid of the "invalid model" issue. Download the bootloader, flash the phone, flash the new ROM and be patient.
My excalibur is also from South America, and worked OK. If you have any doubt just let it know to this thread.
Boa sorte!
Hi,
I`ve problems with the link of Boot loader....
Anyone can send the full URL?
Thanks,
Regards,
Emerson
Hello,
I'm sorry about the links not working, here - i've attached the bootloader for you. here's what you do
1) Run bootloader (attached file)
2) Run the WM6 WWE ROM
3) Run SDA Application Unlock
4) Install Office/Microsoft Voice Command/HTC Audio Manager
5) Install Tweaks/Hacks
here's a site that has some applications and tweaks:
http://mobile.surrealnetworks.com/DashApps.htm
and search this forum, there's tons of information, hacks - etc.
Good Luck !
oh by the way, did you unlock your phone properly?
1) Download unlock software
2) Download .UNL file specifically for your IMEI
3) Connect phone to computer and make sure the activesync's icon has turned green
4) Run unlock software
5) When unlock software asks for .UNL file, browse for it, choose it
6) That's it ! It should say Unlocking done and it'll reboot
Your phone is now Sim & Cid Unlocked. If you have more questions, feel free to ask. just do what i said first then post.
Good Luck ! Hope to see everything working for u...
Hi again...
Now i`ve the Error 260 message everytime my phone boots in "Flash mode" (3 color screen)....
Follow my configuration in this screen:
Excalibur Wi-Fi RUU
ONBL 1.15.0000
Excalibur
SPL 1.15.0000
Excalibur IU
ERROR [260] - No connection
tatarezende said:
Hi again...
Now i`ve the Error 260 message everytime my phone boots in "Flash mode" (3 color screen)....
Follow my configuration in this screen:
Excalibur Wi-Fi RUU
ONBL 1.15.0000
Excalibur
SPL 1.15.0000
Excalibur IU
ERROR [260] - No connection
Click to expand...
Click to collapse
Hi,
Are you using Windows Xp? Cause I've gotten that error a couple of times too but it was in Vista. Try Xp if you're using Vista.
Hi!!
DONE with XP.... but now i`m affraid!! The "Green Screen" with nem OS apparently locked... this is normal? at least 3/4 minutos in the same screen.. both "patches" are applyed sucefully....
Is there anything else to do now?
Hi
My device has a German ROM.
I tried to Rom Upgrade to my O2 XDA III PDA but it doesn't work!
when i flashing the device it's freeze on process at%41 and give a error message. i unplugged the device craddle and flash same ROM again and process completed succesfuly. After all when i turn on my device ,there is only 3 Color on screen (Blue - Green - Red) and at the bottom of device is white. it writes R.1.10.00 at the right bottom of the screen.
Sorry about my english ! i searced it on web but i found a information and it tells find same type device and update ROM with FAT 32 Formatted SD Card.
Can anybody help me for Solve This Problem.
Thanks.
1. do you use vista/7 ?
2. did you forget to take out the sim and sd card during flashing?
that would be 2 possible reasons why you had the error in the first place.
now for the solution: if the flash was really complete and successful, which at this point you cannot tell by the success message, have you performed a proper hard reset?
the instructions on how to do that are to be found here: http://wiki.xda-developers.com/index.php?pagename=BlueAngel_WM5_For_Beginners
power+reset, record+camera, then set the menu options to No, Yes, Yes confirm with the mail button.
rom upgrade through the sd card is generally not such a good idea, since it has never been fully confirmed, that and how it works.
if the hard reset does not solve your problem, you should read -=this=- really carefully and think whether you really did ALL the steps, they are all equally important.
Problem is getting worst !
Thanz chieff for your Help.
Problem is getting worst and confusing. i updated Radio version to 1.10.00 to 1.15.00. Device is turn on but it doesn't boot. My Device has no camera. When i plug it to creaddle it's orange led is ligthting and randon times it boots and 3 Colored screen shown. R.1.15.00 D.****** G******
HTC Blue Angel Windows Mobile 6.1 WWE only. But now it's do nothing. This morning i made hard reset to device and shown SERİAM V.2.07 and put ,t to creedle and tried to Urgrade room but it gives error random positions etc. %54 or %89. ERROR 112
is my device dead???
Thanx you very much for helping me.
(Sorry About My English )
About my OS
i tried to upgrade XP Pro (SP2). Vista and Windows / is Not permission to upgrade...
if you're giving up, mail it to me. i should be able to tinker with it.