Develop Bugs

Help / Advice Needed Regarding o2 Rom Upgrade for XDA IIi

Hi,
I am in the process of upgrading my rom using the rom upgrade from the o2 www site.
Its been stuck on the
'checking the information on your device....Please wait.....Please do not disconnect your device from the PC or power supply until the upgrade is complete'
window for some time now. I dont know if its hung / crashed or in the middle of upgrading.
I dont want to chance it by removing the unit from the sync cradle but at the same time i dont wanna just leave it there for hours if its not doing anything.
Can anyone help ?
Steve
ps - the window I am speaking about came after the big window stating what your current rom / radio stack was and what they would be updated to giving you the option to click 'update' or 'cancel' I chose 'update' and got the message which I described earlier

Try this on a different PC...I'm assuming the phone itself is still functioning.
I had this a while back with the XDA2 and found that by attempting the upgrade on a laptop I had, it worked great without the hang.
I would then remove ASync completely (including registry items) and then reinstall it.
Cheers
Ant

I had this happen, I just shut down and restarted the installer program

PC not upgrading ROM... help

I've searched through the forums and can't find reference to anyone having problems upgrading due to their PC.
I've upgraded ROMs many times before but the most recent venture on my MDA Pro to WM6 (hemi 1.1) has been unsuccessful.
Basically starting 'ROMUpgradeUt' brings up, 'Device Software Update Utility' then clicking next starts the sofware search for the device but then it shuts down with no error message!
I've noticed other ROMs to give me the same problem now (eg Helmi AKU 3.5).
Tried:removing SD card, removing SIM, 'device upgrade mode'(light, power+reset), unchecking usb connection, hard reset, computer restart (XP),
ActiveSync 4.5 5059 working fine, country id error upgrade, tried another MDA Pro same problem.
I've run out of ideas guys.
PS last time i tried to upgrade to WM6 i got stuck on boot screen and had to use the mtty tool to reboot.

I think you should try an other mashine.

SOLVED !
Universal didn't like the different USB port at the back of the computer i was using. I had connected an external hard drive to 'its' port.
This things more touchy than my wife!

AbuGWM5 said:
This things more touchy than my wife!
Click to expand...
Click to collapse
ROFL It's sometimes scary how much I compare my PC to my ex lol...

T-Mobile MDA Compact III issues...

Any help would be great....
I have a MDA Compact III issue when trying to upgrade to the ARTEMIS TOUCH 2.1 or 2.0 software
Unfortunatly, my pda was at 49% charge when i first tried, so stage one got to the end, then told me to charge my fone more and ended.
Thus i charge the fone to 75% and re-started. However, upon reconnecting the fone to commence the restart, the USB device was not recognised.
After removing the Active Sync and indeed the USB Driver from the PC and re-installing it, the conenction was re-established, however, it now often drops the connection. Plugging away, i tried the install Step 1 once more, and upon getting to 100% in the cmd part, and then progressing through the wizard, whereby the PDA displayed the progress bar reachinbg 100% (of the unlock stage) the PDA then reboots, and the connection is lost...and doesnt re-establish itself....and then the wizard reports Error [270] : Update Error The image file is corrupted. Please check your update Utility
Now, i have tried various sources for the software, and indeed tried both 2.0 and 2.1.....
Now i have a PDA that intermittantly drops its USB connection (and needs the USB removed and re-added on the PC) and is now slower than it was, plus never got to step 2 to get the software on iot.....
Can anyone help? Else i have a broken phone so to speak.....
Thanks alot in advance
Paul

paulcharles1 said:
Any help would be great....
I have a MDA Compact III issue when trying to upgrade to the ARTEMIS TOUCH 2.1 or 2.0 software
Unfortunatly, my pda was at 49% charge when i first tried, so stage one got to the end, then told me to charge my fone more and ended.
Thus i charge the fone to 75% and re-started. However, upon reconnecting the fone to commence the restart, the USB device was not recognised.
After removing the Active Sync and indeed the USB Driver from the PC and re-installing it, the conenction was re-established, however, it now often drops the connection. Plugging away, i tried the install Step 1 once more, and upon getting to 100% in the cmd part, and then progressing through the wizard, whereby the PDA displayed the progress bar reachinbg 100% (of the unlock stage) the PDA then reboots, and the connection is lost...and doesnt re-establish itself....and then the wizard reports Error [270] : Update Error The image file is corrupted. Please check your update Utility
Now, i have tried various sources for the software, and indeed tried both 2.0 and 2.1.....
Now i have a PDA that intermittantly drops its USB connection (and needs the USB removed and re-added on the PC) and is now slower than it was, plus never got to step 2 to get the software on iot.....
Can anyone help? Else i have a broken phone so to speak.....
Thanks alot in advance
Paul
Click to expand...
Click to collapse
well, I'll just try to give you some suggestions as I don't know much about MDA Compact III ,it does not fall in the category of wizard,it's a Magician device and I'm a wizard k-jam user. anyhow as a general of upgrading is to have your battery fully charged or atleast must have more than 70% charge.cuz during flashing in RUU upgrade mode,it does not charge,so if while during flash something goes wrong or it takes more time to flash,it shud have enough power to go through the whole process.if it does not have enough power to complete the process,it fails to flash properely and thus have a bad flash creating problems.so same has happened with u, you have a bad flash
well in wizards we have certain methods to revive the device or recharge the battery,i have no idea about your device,but can only suggest get the battery charge,secondly your usb connectivity problem is also due to the bad flash,cuz as there is no OS info on the device,it wont be able to establish the connection,which windows are you using,try to upgrade with winxp sp2 and active synchronize ver 4.5
as i have no idea about Magician upgrading method so wont comment further,but advise you to look in the below thread,it might be helpful,cuz its about Magician MDA Compact III
As your posting in the wring forum you might not get much help here,ok
http://forum.xda-developers.com/forumdisplay.php?f=276
good luck

thanks
thanks for the reply. Got it working - used 2.0 to unlock it, and 2.1 for the actual rom upgrade...

Update just radio in Vista

I have a TyTN with official Russian WM6 onto it, which includes 1.16 radio version. I want a newer one, because this seems unstable, so i decided to update just radio (i don't want any cooked ROM or whatever for now).
Each new version of radio I found here failed earlier or later on a Vista x64 computer with error 260. What I have tried is 1.54.07.00 and 1.54.00.10 and 1.50.
To my surprise, packaging is different, but the effect is the same: after "Verifying the image on your device" (i can hear USB disconnecting and connecting back as the device enters bootloader) they time out with 260.
Right now I'm trying to revert what have I done to Vista as it won't allow me to turn off driver signing, as advised.
Ah, this doesn't work either (same error 260).
What am I doing wrong? My bootloader is, as said on that screen:
Code:
HERM200
IPL-1.01
HERM200
SPL-1.40.Olipro
Yes, I have installed some...er...thing before, maybe it was called "HardSPL", but it didn't come handy and wasn't any use to me as I decided against cooking a ROM.
Update: What I like the most is, despite all my attempts the device still works! Other than the radio troubles, that is.

I've updated from an SD card.

Try this my friend... http://www.mrvanx.org

Thank you, I did.
Please note the x64 drivers are unsigned so to use them successfully you must disable driver signing.
Click to expand...
Click to collapse
This is what I'm unable to do, but I suppose is beyond this forum.

Hi
I have had the same problem with my x64 vista pc and the 260 error msg. It took me hours but what seemed to finally fix it for me was to:
1. completely remove WMDC from the pc, reboot the pc,
2. reinstall WMDC plus upgrade,
3. uncheck the allow USB connections option on your 8525, exit out of the window, then do a soft reset
4. now make a USB connection w the PC
Let us know how it works

Sorry, you'll have to wait till my next upgrade Everything is working so far - so until I need something that can't be achieved using SD flashing I'll stick to this technique. Thanks for the advice anyway.

Qtek 9090 wont upgrade

Hi i am new on this forum ,i have a qtek 9090 unlocked bought on ebay
it runs windows 2003 and when i try to upgrade to wm6 ,the process starts and and it goes into USB V2.08 and pc makes a usb has been removed sound and the installer gives me a error msg
ERROR 120:COUNTRY ID: ERROR
and when i do a soft reset it comes up with a new installtion of (wm2003 which i hate)
this is getting to my head as i need to upgrade my PDA
can anyone help me
send me some links with the correct software and stuff please

you need to put the device in bootloader mode before connecting it to the pc by pressing reset+power+record and use the MAupgradeut_noID instead of the BAupgradeut to upgrade your device. if you don't have the MAupgrade tool present, you can download it from this post of mine:
http://forum.xda-developers.com/showpost.php?p=3768875&postcount=3
by doing these 2 points, you can avoid all error 101, 110 and 120

windows 6 for qtek 9090
does anyone have links to the new wm6 for qtek 9090

try this: http://forum.xda-developers.com/showthread.php?t=482997

No service
upgrade done and the phone worked for about 3 days now is says no service and wont pick a network

first make sure you didn't soft-reset the device the wrong way, meaning restarting the device by releasing the battery lock, because restarting it like that generally starts the device w/o radio, meaning no phone function. to avoid that, simply soft reset again by pressing the actual hardware reset pin.
in second thought, you might wanna post the values shown in the boot screen, maybe another radio rom might do the trick.
if neither of that worked, maybe you should try another sim card or a different location for testing network coverage just to figure out, if it might have something to do with a network failure.
if still however nothing worked, which i wouldn't hope, it still could be a bug with the particular rom and you might try another rom.
and at last, if that didn't help, you might have a broken radio receiver and as a harware fault would require you to repair or replace the device, but that is rather unlikely, so you are probably lucky and can fix it yourself.
please post back if and when you figured out, what the problem was, so we can all profit and learn off it.
with best regards,
Chef_Tony