Intellisync and XDAiis - MDA III, XDA III, PDA2k, 9090 General

Has anyone succesfully used Intellisync with XDAIIs. I have Lotus notes at work (6.5) and the latest version of Intellisync. I try and sync my XDA with my laptop through bluetooth and it does my tasks OK,but generates an error when I try and sync my Calender.
ERROR (48): couldn't access shared memory key 'IRIS$MEM$194$0$x.notes.data' - (22) Invalid argument
Does anyone have any ideas

hi, when you start intellisync, is your notes also running.
if so, do you still get this error by shutting down notes?

Related

WM6 & ActiveSync

Hi All.
I have a problem with MS ActiveSync that's driving me mad.
I have Windows 2000 loaded on my work laptop (not my choice but my IT departments) and I'm currently using ActiveSync 4.2 - A couple of weeks ago I loaded one of the latest WM6 roms onto my HTC TYTN with no problems at all - I was very impressed with the basic enhancements and especially the fact that I could at long last recieve a text message notification for voicemail (I'kme easily pleased I know) - So now to my problem.
I tried to connect my TYTN to my laptop to load my BB Connect profile when I got a message that I need to upgrade ActiveSync to 4.5 ???? So, not concerned at this point I download the latest MSI package and started to install ActiveSync 4.5 on my Windows 2000 system... but.... towards the end of the install I got an error message telling me that I cant install ActiveSync because I am missing some DLL files (it doesnt specify which .dll files???)
I've searched everywhere for help resolving this problem but to know avail? So I have 3 questions?
1. Is there a known issue with ActiveSync 4.5 and Windows 2000? If so is there a fix for this?
2. Is there a viable alternative to MS ActiveSync that will work with WM6?
3. Is there a way of Syncing my BB Connect settings with my TYTN without using AciveSync.
Apologies if this is already covered elsewhere on the forum - any help at all would be greatly appreaciated.
Thanks.
One quick google search has given me this post. Give that a go and see what happens?
MAPI32.dll issue...
My wife had a similar issue which was either the mapi32.dll problem or just a fubar ActiveSync. I ran the fixmapi as well as removed most if not all traces of the old ActiveSync (Program Files and registry)
Hope this helps...
FixMapi
Thanks DBaser and MrVanx - I've already tried the FixMapi option but with no success - will try again followed by a sweep to remove any traces of a previous ActiveSync install before re-installing - I'll let you know how I get on.
Sigh....
OK - Tried running FixMapi.exe once again having completely uninstalled ActiveSync 4.2 and deleted the directories from the programmes directory and still I get the same error message? HHEEEeeeeelllppppp.....!!!!! This is driving me mad.... How about just getting the BB Connect settings accross to my TYTN without having ActiveSync installed???? Any Idea's?
Have you tried reinstalling the ActiveSync that came with your PDa and then run the 4.5 installer?
Give that a go...
VM6 requires Active Sync 4.5
Tried all of the above - still no joy!
Can you post a screenshot of the error message and also maybe check the Event Viewer (Start>Run>eventvwr) for Application or System errors that could help me diagnose further?
Wessel.Dk said:
VM6 requires Active Sync 4.5
Click to expand...
Click to collapse
I am aware of this. I was asking the OP to install earlier ActiveSync and then run the 4.5 installer.
try hard resetting....then before doing ANYTHING, sync...follow the sync directions....make sure a new device name is synced with pc and device.......many go-arounds were finally solved by this.
rockky said:
try hard resetting....then before doing ANYTHING, sync...follow the sync directions....make sure a new device name is synced with pc and device.......many go-arounds were finally solved by this.
Click to expand...
Click to collapse
rockky, go back and reread the thread. THis has nothing do do with the PPC. he is trying to install software on the PC.
Still Trying....
All. Thanks for the input so far - if anyone comes up with any more suggestions then please let me know!
I'll keep at it and if I find a solution will add the details to the post.
My IT dept are pretty snowed under as with those in many companies and so my little problem with a missing dll when trying to install a peice of software that has little or no benefit to the company is way way down the priority list.
Thanks again.
More Pain....
So... a short update.. I managed to convince my IT department to upgrade my system to windows XP (SP1 though as SP2 isnt yet supported by them) and guess what happens????
I eagerly await the arival of my new laptop - I get it today - boot it up - go straight to the microsoft website - download the activesync msi file..... hit the install button - and then..... and then I get the missing dll file error...
This is driving me mad? I'm presuming its a 'corporate' image problem or a specific peice of software installed on our laptops thats the issue? Are others having the same problem? and is there anyone out there who has found a working solution? or am I going to have to wait for another release from microsoft and hope that installs?
Alternatively - is there a way of setting up my blackberry connect settings without using active sync??? Can they be exported some other way? from tytn to tytn for example (Yes - I'm lucky enough to have two!)
As ever - any help is appreciated.....

WM6 (elf version) with Activesync 4.5

Hello,
I upgraded to wm6 (elf version, rom 3.30.2.1, rom date 04/17/07, radio 1.43.00.00, protocol 32.76.7020.19H) and activesync 4.5.
When I reloaded all my outlook data first time, it worked fine. I have win xp, sp2, outlook 2003.
However, when I loaded teh rest of my software and tried to resync a few days later, I got "Activesync encountered a problem on the desktop. Support code 85010014" The activesync diagnostic reports a problem MS cannot solve and asks for a dump file to be sent to them, copy attched below.
Searching the forum did not come up with wm6 problems for that error code. Can anyone help?
Thanks
Richard Racer.
---QoS RSVP
Pinging Desktop gateway 2.252.42.3 started
Ping echoed successfully
Pinging Desktop gateway 192.168.0.1 started
Pinging - IcmpCreateFile failed, err = 11010
Pinging Device 169.254.2.2 started
Ping echoed successfully
Attempting to connect to device
Device operating system version 5.2.1413
ActiveSync is performing a sync, please wait......
Searching ActiveSync log file
Error found: p(2820) t(2660) TraceToFile -> ERROR in CItemEstimateMgr::_Execute : hr = 0x80004005 - ItemEstimateMgr.cpp(486)
Error found: p(2820) t(2660) TraceToFile -> ERROR in CCmdProcessor::ExecuteCmd : hr = 0x80004005 - CmdProcessor.cpp(186)
Error found: p(2820) t(2660) TraceToFile -> ERROR in CMsgProcessor::_DoExecute : hr = 0x80004005 - MsgProcessor.cpp(984)
A connection problem has been detected for which there is currently no known solution. Please click Send results to Microsoft to help Microsoft develop solutions to these problems.
Exiting
Try reinstalling ActiveSync ;-)

Synchronisation Problem between activesync and webmail

Hi everybody,
I have recently installed on my HTC P3300 a new ROM (AJE V1.70) and I have an issue to synchtronise with microsoft outlook web access via activesync 4.5 (via GPRS).
Activesync is giving me the following error message : the server cannot be found, please verify the name of the server.
Maybe on of you already had this kind of issue.
Thanks in advance for your help.

upgraded your 2495b to wm6 recently? esmertec jbed error?

I just installed wm6 thanks to you guys! (WOO HOO!!) So far soo good...
Except I installed Esmertec Jbed and Jeodek but sadly they do not work when I click on the little red icon! (installed via cab)
I get the error:
The file 'jbed' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.
Anyone know a fix? I really wanna get gmail working on here! My friend has a blackberry and I want to 'put out his fire'
Additionally, from 100%, I took the new WM6 off the charger today for about 15 minutes and it went down to 94% (wifi was on...) This seems like a very fast battery drain NO? Is there any reason for concern?
Thirdly, I notice even on lower volumes when I play some music, the speaker making cracking sounds...??
There is no native ppc Gmail client? I need the jvm version? Same by Opera?
Any really fun games anyone recommends also ?
*update* Got an error trying to install Windows Live! PPC displayed: "unsuccessful" for the cab... WHY!?! ahhh
I had the same problem installing windows live yesterday. But after a soft reset the program installed successfully.
For gmail, I dont use it but I found a link with freeware progs that include this future:
http://en.softonic.com/search/gmail/1111
torahtrance said:
Except I installed Esmertec Jbed and Jeodek but sadly they do not work when I click on the little red icon! (installed via cab)
I get the error:
The file 'jbed' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.
Anyone know a fix? I really wanna get gmail working on here! My friend has a blackberry and I want to 'put out his fire'
*update* Got an error trying to install Windows Live! PPC displayed: "unsuccessful" for the cab... WHY!?! ahhh
Click to expand...
Click to collapse
I have the same error with wm6 and x50v - anybody can point to resolution?
I have the same error message while starting jbed on my IPAQ hx4700 WM6.1.
Is there a solution out there?
http://forum.xda-developers.com/showthread.php?t=385574
Thank you very much Asbestos!
it works!

error 503 when updating hx2755 with tommys wm6.1

been trying for the last 2 days to update always getting error 503, after trying to verfiy data on pocket pc in hpruu.exe, i am in pre-bl, dont seem to have to press calender to access it, or nothing else happens when i press it. computer makes the beep when i connect the ipaq to it. active sync does not wake up though (go green). but there is the satus on the pda on the bottom left about the usbb being connected.
the error comes up in hpruu.exe during verifying the device, error 503 active sync error. cannot communicate to the ipaq with active sync.
any ideas??
pre-bl 1.00.02
activesync 4.5
hx2755 security disabled
thank you.

Categories

Resources