Since yesterday i meet a new problem with my XDA2s.
I can't use my touch screen with my pointer pencil. It is not reacting. If i use my finger it is working but with oencil no. After hard restart it is working but after restoring data it is working 5 minutes and ist stoping again. Is it virus or??
Help
And I relise that it is workink only with some wide tip of pencil if it is sharp it is not working. But screen is working after hard reset.
Any sugestion what to do?
Mahatma, try another hard reset, after full backup, then use the phone without restoring your data, see if the problem occurs, if it doesnt occur then you can be reasonably sure that it is a software problem.
Related
Hi, to all!
I have a problem with the touchscreen of my hermes alias O2 trion.
When starting from cold state the touchscreen works normal. After some time the screen reacts not allways and shortly after that it does not react at all. Reset does not change anything.
Is it a upgrading problem or is it a hardware problem?
Here the hole story:
I bought a used device with Win Mobile 5 on it. At the first try out it worked, but afer some time the screen did not react to my stylus at all. After a reset it worked again so i dit not pay much attention to this and upgraded to official Windows mobile 6 (which was downloaded from O2). Update worked fine.
Then i ran a rom update on the computer to change the start screen. The tion disconnected (update stopped at 0%). Little shock, but the trion still worked. The program and radio versions did not change.
First thought: this was no official update, so trion did not accept it. Was something installed or was everything blocked?
Could this make problems?
What do you think?
Thanks
i think this problem:
http://forum.xda-developers.com/showthread.php?t=285062
Alienax said:
After some time the screen reacts not allways and shortly after that it does not react at all. Reset does not change anything.
Click to expand...
Click to collapse
Did you try to re-calibrate your screen? It could be a question of the screen loosing calibration so bad that when you press it, it works but you are not HITTING any buttons, because the calibration is off...
I have that problem with my Hermes, I need to recalibrate several times every day, especially after sliding out the keyboard (since the screen flips then) .
There's a very nifty short-cut to the calibration app: press the middle button on the D-pad while pressing the messaging button to go to the calibration screen, then press the middle D-pad button to launch the calibration (same as pressing "calibrate" with your stylus).
There seems to be a lot of Herms that have serious calibration issues. I'm personally so tired of it I am thinking of buying something else.
Good luck,
Laz
It's KNOWN hardware issue where the processor heats up and *somehow* transfer heat to the digitizer which make it unresponsive. I got a Hermes just like that laying around. Can't fix it.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Problems
Thanks!
Today the touchscreen worked good. Even playing spider solitair was possible. Then i pluged it into power supply and the device got slightly warm. The touchscreen did not work any more.
Could be a heating problem of the prozessor like Mikro_ Tech described. Thanks by the way
How can i be sure it is this problem and not something else?
@LazPL: That was one of my first thoughts as well and i did.
When the Touchscreen works, it works just fine and accurate. Then it behaves strange (sometimes not corresponding to touches, programms close all of a sudden) and shortly after that it doesn not work at all.
@the_passenger: The Hermes Version is HT 626... Anything special to this, because the link just lists screen allignment issues for this modell?
What do you think of the solution from the link LazPL posted?
I,ll be using my diamond for 2 weeks until a day I tap the screen and I noted that everytime I tap the screen open the start menu program...always!no matter what I do or tap anywhere on the screen always do the same thing open the start menu and I have to move manually everything by the wheel... so I do a hard reset!! Now I try to align the screen more than 50 times with the finger and with the stylus and nothing work!so if anybody can help me with this problem before I send to the HTC servicing......I appreciate that,thanks [/B]
p.s I upload 2 pic for idea!
having the same problem tried almost a hundred times to align the screen but doesnt wrk at all
HOPE IF SOME1 CAN HELP!!!!!!!!!
if you hard reset and it still doesnt work, then its most likely a hardware fault.
2 ppl having this same weird prob...!! anyways like loomx said.. should be a hardware fault//
I had same problem also with screen alignment.
I had been using the phone all day without problem.
After I had been using the Diamond for Wired Internet connection I noticed the touch screen was not working properly.
I tried hard reset which made it worse! Tried to calibrate but it would not at all.
After the hard reset I did a soft reset, and had to use the cursor button to navigate to the system menu so I could get to the screen alignment program.
Eventually I regained control of the screen after doing a calibration of screen.
I have been using BSB WM 6.5Q. Is there some bug in this verion WM6.5 ??
What version were you other people using when this happened?
try this it worked for me
i had a similar problem with my diamond not as serious as yours but i ran mtty with the task 28 55aa comand reinstalled the rom and everything back to normal this may help. worth a try there is a tutorial on mtty called
THE DEFFINATIVE MTTY THREAD its very well written and easy to follow
Could you please explain in more detail how to do the mtty thing? I'm afraid I havent used that before and I have the same issue!
follow the tutorial in this thread its a brilliant guide and it sorted mine a treat http://forum.xda-developers.com/showthread.php?t=540290
my tp2 touch screen is not responding suddenly!!! the problem started only after i answered some call through the screen slider, however, the touch screen is not responding to my fingers ever since !!!!
now i'm operating the phone only through the buttons !! but as if it is not touch screen!!
anyone have a clue about what the problem can be?? please help me. my device runs wm 6.5 and this is the first time to have this problem, i did soft reset many times but no imrovment!!
I had SOD this early morning and it was my first, do you guys think there is a relation between these events???
I have the same problem.
Just happened this morning.
I was able to use my mobiler to access the screen.
Tried several hard resets. No luck.
Tried re-installing energy Rom (4.1)
Then tried the new Energy Rom (4.11) still no luck.
But then I got the big idea to go back to the stock ROM. Now I cannot use the on screen prompts to access "my mobiler"
Anybody have any suggestions or is it back to AT&T for a new phone?
so whe you back to the stock rom, did u get ur screen working again??
No. no workey
Now that stock rom is on. I keep going back to the "Sim Card Changed" screen. I can not tap "cancel" or "Next". I can use the hard buttons so I am able to get to the phone and then use keyboard to dial.
Still no touch screen. And no work around with keyboard to get to screen. need a "Tab" button. then might be okay.
this sucks.
Just a quick bump before I go to AT&t in the morning.
Try running task 29 and then flash back to a stock.
And have you tried taking your sim card out of you're phone? Maybe that will avoid the message.
i'm buying a black berry
Does your screen look as if an oily residue is under the touch screen part?
My screen stopped responding a few weeks after the appearance of the 'oil' and Vodafone swapped it with no problems. It seems like a fairly common problem
yes, I've got that oily spot and somehow i managed to relief the problem only for minutes when i raised the digitizer carefuly which got me the screen working for few minutes untill it went unresponsive again after while. I'm looking forward to do alcohol swab to this oily spot and will see weather this will solve the problem..
Ok so I did a factory reset on my g2 and afterwords everything was fine but the touchscreen doesn't work and sometimes it clicks things on my phone, I can't even unlock my phone I can only use it when I do a factory reset because I can use the trackball for that, please any info would help
Ok so I've been able to still use my phone for the most part with no touchscreen (that's what I'm typing on). I've found similar issues but they all involve replacing the screen digitalizer but I'm not sure if its hardware before I buy one because I think its a aoftware issue, because when it first happened it would sometimes click things when I touched the screen but it wouldn't be what I touched
So many threads about proximity sensor problems, but none of them with the right answer...
I have this problem with my Sensor were everytime I reboot my phone or do a Factory reset using recovery,
EVERYTHING starts to work normal. It last for about 5 minutes when the screen no longer turns off when I get a call and get it close to my ears.
I dont know what it is i've tried different Roms and going back to ICS but the problem keeps showing after some time. There must be some Gnex users with the same problem and yet there isnt a solution... perhaps is a hardware problem? maybe not because each time yo reboot or factory reset... the problem goes away. Any help will be appreciated.