align problems c'ant align the screen!! - Touch Diamond, MDA Compact IV ROM Development

I,ll be using my diamond for 2 weeks until a day I tap the screen and I noted that everytime I tap the screen open the start menu program...always!no matter what I do or tap anywhere on the screen always do the same thing open the start menu and I have to move manually everything by the wheel... so I do a hard reset!! Now I try to align the screen more than 50 times with the finger and with the stylus and nothing work!so if anybody can help me with this problem before I send to the HTC servicing......I appreciate that,thanks [/B]
p.s I upload 2 pic for idea!

having the same problem tried almost a hundred times to align the screen but doesnt wrk at all
HOPE IF SOME1 CAN HELP!!!!!!!!!

if you hard reset and it still doesnt work, then its most likely a hardware fault.

2 ppl having this same weird prob...!! anyways like loomx said.. should be a hardware fault//

I had same problem also with screen alignment.
I had been using the phone all day without problem.
After I had been using the Diamond for Wired Internet connection I noticed the touch screen was not working properly.
I tried hard reset which made it worse! Tried to calibrate but it would not at all.
After the hard reset I did a soft reset, and had to use the cursor button to navigate to the system menu so I could get to the screen alignment program.
Eventually I regained control of the screen after doing a calibration of screen.
I have been using BSB WM 6.5Q. Is there some bug in this verion WM6.5 ??
What version were you other people using when this happened?

try this it worked for me
i had a similar problem with my diamond not as serious as yours but i ran mtty with the task 28 55aa comand reinstalled the rom and everything back to normal this may help. worth a try there is a tutorial on mtty called
THE DEFFINATIVE MTTY THREAD its very well written and easy to follow

Could you please explain in more detail how to do the mtty thing? I'm afraid I havent used that before and I have the same issue!

follow the tutorial in this thread its a brilliant guide and it sorted mine a treat http://forum.xda-developers.com/showthread.php?t=540290

Related

White screen - even worse ... please help

Dears,
I faced the white screen the first time last Thu. I migrated my device (Jasjam) to Black Pro 2.0 on Wed. and started to get the white screen on Thu.
I was going arround it by few turn-of turn-on untill today morning when I noticed that the screen shifted down by 1mm. In fact more precisly, rotated down 1mm. Starting with the splash screens, the Windows booting screen and the Windows later. Everything is rotated down by the 1mm meaning what is disapearing from bottom is showing on top!
I got to the device through the mtty and ran task 2a, everything was okay. Then I ran task 28 and task 8. The deveice booted with the sae shifting problem. I installed the latest LVSW 05Apr07, the same problem still although the Windows is working fine. Switching the device off will not switch the screen off immediatly, the screen goes in fade-away type of action for about 2 minutes until it totally powers off.
Any idea? Does that mean I am loosing the mobile? Please help.
Appreciating all help.
Regards.
attot1239 said:
Dears,
I faced the white screen the first time last Thu. I migrated my device (Jasjam) to Black Pro 2.0 on Wed. and started to get the white screen on Thu.
I was going arround it by few turn-of turn-on untill today morning when I noticed that the screen shifted down by 1mm. In fact more precisly, rotated down 1mm. Starting with the splash screens, the Windows booting screen and the Windows later. Everything is rotated down by the 1mm meaning what is disapearing from bottom is showing on top!
I got to the device through the mtty and ran task 2a, everything was okay. Then I ran task 28 and task 8. The deveice booted with the sae shifting problem. I installed the latest LVSW 05Apr07, the same problem still although the Windows is working fine. Switching the device off will not switch the screen off immediatly, the screen goes in fade-away type of action for about 2 minutes until it totally powers off.
Any idea? Does that mean I am loosing the mobile? Please help.
Appreciating all help.
Regards.
Click to expand...
Click to collapse
Remove the battery for 5 minutes and re-insert it back..see if it will fix it or not.
attot1239 said:
Dears,
I faced the white screen the first time last Thu. I migrated my device (Jasjam) to Black Pro 2.0 on Wed. and started to get the white screen on Thu.
I was going arround it by few turn-of turn-on untill today morning when I noticed that the screen shifted down by 1mm. In fact more precisly, rotated down 1mm. Starting with the splash screens, the Windows booting screen and the Windows later. Everything is rotated down by the 1mm meaning what is disapearing from bottom is showing on top!
I got to the device through the mtty and ran task 2a, everything was okay. Then I ran task 28 and task 8. The deveice booted with the sae shifting problem. I installed the latest LVSW 05Apr07, the same problem still although the Windows is working fine. Switching the device off will not switch the screen off immediatly, the screen goes in fade-away type of action for about 2 minutes until it totally powers off.
Any idea? Does that mean I am loosing the mobile? Please help.
Appreciating all help.
Regards.
Click to expand...
Click to collapse
what bootloader version are you running?
Many thanks trashcan for your quick response. I have removed the battery for 5 minutes, the screen was still showing that last image. I keept the battery out for 15 minutes untill the screen was totally off. Reruting the battery resolved the ****ing issue, thanks again.
Also thanks to walshieau, the device has IPL-1.01 and SPL-1.40.Olipro.
Regards.
Regards.
The bad part of the news is that the white screen is still comming!!!
Any clue?
Regards.
I thought of sharing this with you
I have just done the follwoing:
> Updated (again) the device with SSPL-1.40
> Re-flashed the device Force through SSPL the new OS (LVSW)
The phone looks better, however I got the white screen two times in about five minutes.
Wat else I should do? Please share your experience.
Regards.
attot1239 said:
I have just done the follwoing:
> Updated (again) the device with SSPL-1.40
> Re-flashed the device Force through SSPL the new OS (LVSW)
The phone looks better, however I got the white screen two times in about five minutes.
Wat else I should do? Please share your experience.
Regards.
Click to expand...
Click to collapse
Read?
1) Ensure that you have 1.40.Oli by checking the bootloader screen.
2) Run the upgrade, but, select AUTO DETECT! DO NOT CLICK FORCE SSPL!
3) White screen gone
LegolasTheElf said:
Read?
1) Ensure that you have 1.40.Oli by checking the bootloader screen.
2) Run the upgrade, but, select AUTO DETECT! DO NOT CLICK FORCE SSPL!
3) White screen gone
Click to expand...
Click to collapse
not quite, the ROM image affects some devices, I'll redo Black 2.0 like I redid LVSW if this keeps happening.
It is getting worse now ... I do not know what is happening
Good morning,
Thanks LegoLasTheElf and Olipro for you input, I started to patch the device again and although everything was normal, the update program sayed the connecting was lost and took me to a recovery screens which just went into a loop (repeating the same steps with no hope).
The device is on the bootloader (tri-color) screen. I tried getting into it using the mtty and set 14 0 (as I found it on on of the posts) however it did not help.
Could someone tell me please to to get the device to boot normal again.
Regards.
attot1239 said:
Good morning,
Thanks LegoLasTheElf and Olipro for you input, I started to patch the device again and although everything was normal, the update program sayed the connecting was lost and took me to a recovery screens which just went into a loop (repeating the same steps with no hope).
The device is on the bootloader (tri-color) screen. I tried getting into it using the mtty and set 14 0 (as I found it on on of the posts) however it did not help.
Could someone tell me please to to get the device to boot normal again.
Regards.
Click to expand...
Click to collapse
yeah... flash my patched LVSW with CustomRUU
Olipro said:
yeah... flash my patched LVSW with CustomRUU
Click to expand...
Click to collapse
Yeah, that works!! That is how I solved my whitescreen.
thx Olipro!!
Many thanks Olipro for your continued help.
I have gove through your topic on the white screen and I posted you a reply there. The megaupload site is blocked in my area, if possible please mirror it on another site, i.e. 4shared.com
Regards.
I have exactly the same White Screen symptoms and more recently, the 1 mm screen shift problem too. I removed my battery for 15 mins and the screen shift temporarily went away but on the next reset, it is back :-(
I have SPL-1.40 Olipro but am unable to download the LVSW to resolve White Screen as Megaupload never works in my area. Can someone post that ROM to Rapidshare please.
Thanks a ton!
Olipro said:
yeah... flash my patched LVSW with CustomRUU
Click to expand...
Click to collapse
Where can I get the CustomRUU? The device is now on the BL screen and the tools are being able to communicate with it.
Regards.
Alright, I have the same problem here. Now before anybody comes on here and tell me to read this and that, I've tried everything.
From going back to 1.01MFG, mtty the OS, use 1.40, use customRUU, leaving the battery out for 5mins, 15mins, hours, over night. Even tried going back to the original ROM and still nothing, the same damn white screen. As far as I am concerned, the intervals are actually getting worse and it comes on more often.
Anybody has any other ideas beside the ones that are posted everywhere. Trust me I've been trying to fix this for over a week now and I have read everything on here.
Any help is appreciated. Thanks guys
YES This was my first solution
http://forum.xda-developers.com/showthread.php?t=298520
bcrx7 said:
Alright, I have the same problem here. Now before anybody comes on here and tell me to read this and that, I've tried everything.
From going back to 1.01MFG, mtty the OS, use 1.40, use customRUU, leaving the battery out for 5mins, 15mins, hours, over night. Even tried going back to the original ROM and still nothing, the same damn white screen. As far as I am concerned, the intervals are actually getting worse and it comes on more often.
Anybody has any other ideas beside the ones that are posted everywhere. Trust me I've been trying to fix this for over a week now and I have read everything on here.
Any help is appreciated. Thanks guys
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=298520
@BCRX7- After the WHITNESS from LVSW and then black1.2 I used this QTEK rom. It got rid of the white screen. Then I used Olipro's modified ROM. I am now running BLACK2.0 with no problems. Props OLIPRO and JasJammin!!!
i solved my white screen in a different and strange way, but easy
you may not believe it, but i did it, i solved the problem of my white screen in a very simple way.
i put my hermes in the fridge for 20 mins at 2C and i keep it on and put it over night.
(no charging, no sync, .... nothing)
this is the way how i solve it.
try it at your home, and tell me what happened to it.
thanks for all.
Hardware or software issue?
Hi,
Did anyone figured if white screen is hardware or software related issue? I wonder if there is anybody that doesn't got any whitescreen since they upgraded to WM6. I observed that the number and the severity of the white screens was different depending of the cooked ROM used (I have Olipro 2.10 SPL, Radio 1.50). Unfortunately I didn't count the white screen number for each version in order to choose the right one
I want to be sure I have tried all software methods before I will send my Hermes to the mobile operator for a replacement (if it is a hardware issue). Thanks in advance for any suggestion!
Hi all.. I had the same prob and it developed into this: http://forum.xda-developers.com/showthread.php?t=303872
So its a HW problem... You can get it back to normal by hitting(yeah not the nicest thing to do with a toy that has high price tag) the phone when its turned off completely -if its hibernating it doesnt work. If you have warranty time left -get it fixed. If not -you can try opening the hermie and doing whats told on 8th page in thread I mentioned. I got mine fixed by changing the front keyboard circuit board..

B&B 4.0 Freezes at B&B 4.0 screen

I was doing something in task manager yesterday.
When i was shutting down some programs.
My MDA COMPACT III froze.
The last program i closes was device.exe
Now its hanging,
It goes through he O2 screen, the next screen stays on.
Back light keeps burning.
what am i supposed to do now?
I've had this a few times now. The latest was after I installed Opera and did a soft reset. I left the PDA for over an hour but it never came back responsive. After several soft resets I had to do a Hard Reset. (Hold down both Soft-Keys and Press the reset button in the hole on the side with the stylus). This WILL wipe all your data though.
i already left it on for 5 hours, no changes where made.
i also left it laying on my desk with the battery removed.
no changes
In bootloader it doesn't get connected to my pc, so i can't flash any rom into it
Tha said:
i already left it on for 5 hours, no changes where made.
i also left it laying on my desk with the battery removed.
no changes
In bootloader it doesn't get connected to my pc, so i can't flash any rom into it
Click to expand...
Click to collapse
Do a Hard Reset. (Hold down both Soft-Keys and Press the reset button in the hole on the side with the stylus).
when i do a hard reset, it goes into bootloader.
i press the soft-keys on side of the MDA (voice & power) put the stylus in.
it goes direct into bootloader when i pull out my stylus
Tha said:
when i do a hard reset, it goes into bootloader.
i press the soft-keys on side of the MDA (voice & power) put the stylus in.
it goes direct into bootloader when i pull out my stylus
Click to expand...
Click to collapse
that is not how a hard reset is done. dont press the buttons on the sides of the device. what you do is starting bootloader.
to do a hard reset do as described here in the wiki.
Tha said:
when i do a hard reset, it goes into bootloader.
i press the soft-keys on side of the MDA (voice & power) put the stylus in.
it goes direct into bootloader when i pull out my stylus
Click to expand...
Click to collapse
That's bootloader mode NOT a hard reset.
To perform a hard reset, press and hold two keys on FRONT of phone next to Red and Green call buttons while pressing reset button with stylus. Keep these TWO buttons held until text appears on screen asking you to "Confirm to Format". Press the GREEN call button and then sit back until the phone re-boots.
Then you have the good job of re-installing everything again.................at least the phone will now work though.
i feel freaking dumb right now....
going to feel a shamed sitting in the corner with a donkey hat on.
thanks guys, its up and running!
Same problem here have to do hard reset every couple days.Did had back-up but now that freezes also
This way it`s not for me,will go back to other ROM till this is fixed.
A pitty though
same here,
4.0 isn't finished.
very unstable imo
Tha said:
same here,
4.0 isn't finished.
very unstable imo
Click to expand...
Click to collapse
have the same problem
stucking Artemis
same Problem here with my Orbit. I had to hard-reset two times last week after installing new programms. After It ran fine for about 4 days until yesterday.
Anyway, very fine piece of Rom, even nicer when buggs fixed.
If you guys can post what you have installed, whether you have anything added in traylauncher, and if you overclock with batterystatus, that would be really helpful - It would be good to nail this problem down, as people have been having this kind of issue since v3.7, and I've yet to find anything in common.
As it stands, after I've disabled traylauncher, I've not had to hard reset for nearly a week now.
Furbious said:
If you guys can post what you have installed, whether you have anything added in traylauncher, and if you overclock with batterystatus, that would be really helpful - It would be good to nail this problem down, as people have been having this kind of issue since v3.7, and I've yet to find anything in common.
As it stands, after I've disabled traylauncher, I've not had to hard reset for nearly a week now.
Click to expand...
Click to collapse
The first time my Orbit stuck just after installing Battery-Status as first Program after installing the new Rom to my Orbit. (I did not overclock at this time!)
I do not know what was second, but my device stuck after necessary soft-reset just after installing.
I installed B&B 4 again after the second hard-reset and it worked fine with dynamic overclocking from 143 to 247 MHz for 4 - 5 days. I felt as a lucky Guy
Yesterday I had to switched off the phone (not the device). As i wanted to switch on the phone some hours later it stuck. After waiting some Minutes and nothing happened, I did a soft reset and my Orbit hung in B&B-screen. A few soft-resets later I did a hardreset to get it back to work.
For those still having trouble with freezes on soft reset - have any of you still got the 6 tab home plugin?
Gullum posted this in the Dev forum, and that could be whats causing it - I'd gone back to 5 tabs, as it'd always set the phone to vibrate with appointments.
I'd forgotten that I'd done that, and that could well be whats fixing the issue.
Hi i've already had this problem, which is well described in this thread...
http://forum.xda-developers.com/showthread.php?t=323995
Its a bug in this version of B&B 4.0
hopefully Tom will be fixing it
theres no cure for it but to do a hard reset unfortunately
Furbious said:
If you guys can post what you have installed, whether you have anything added in traylauncher, and if you overclock with batterystatus, that would be really helpful - It would be good to nail this problem down, as people have been having this kind of issue since v3.7, and I've yet to find anything in common.
As it stands, after I've disabled traylauncher, I've not had to hard reset for nearly a week now.
Click to expand...
Click to collapse
have you done any soft resets since then?
also i dont seem to find any pattern. I have tried various applications as i've mentioned in this thread http://forum.xda-developers.com/showthread.php?t=323995 , i have done with and without tray launcher the problems is still there.
I must have soft reset a dozen times since, installing new keyboards and other such software.
No problems at all.....
Have you tried installing the 5 tab home plugin which is in the main B&B v4.0 thread?
Furbious said:
I must have soft reset a dozen times since, installing new keyboards and other such software.
No problems at all.....
Have you tried installing the 5 tab home plugin which is in the main B&B v4.0 thread?
Click to expand...
Click to collapse
Hi Furbious, what is this 5 tab home plugin and how would that make any difference? if that is going to fix it, then i'll try it again. THANKS
terabaap said:
Hi i've already had this problem, which is well described in this thread...
http://forum.xda-developers.com/showthread.php?t=323995
Its a bug in this version of B&B 4.0
hopefully Tom will be fixing it
theres no cure for it but to do a hard reset unfortunately
Click to expand...
Click to collapse
Its not a v4 only issue, i had the same problem with v3.7 and that was without anything else installed, it only happens on soft reset and it appears to happen more oftern than not when there is some form of activity, ie, program closing / loading, media player running.
Just happened for first time on v4 for me yesterday, again, no additional programs installed

sgh i780 screen can't align pls help

i make hard reset to my fhone,then i can't align my screen,i align my screen many times.nothing happen.
i have the same problem
so,what hapen to you fhone now? my fhone still under waranty,and i send to fmg service centre and they said maybe touch panel problem,did you fix you fhone ready?
Screen Align problem
Me too having the same problem after hard reset
I think its a problem with the latest wm6.1 roms.
Align must be a bit "off" to work...although I havent found a pattern yet...
Download PHM RegEdit, install and create/modify this registry key:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="501,489 781,231 778,770 232,759 232,225"
These should work quite OK
sent back samsung is touch panel hardware problem so change a new touch panel... Thanks, it can not go in to windows at all so cant edit registry
garytanyh said:
sent back samsung is touch panel hardware problem so change a new touch panel... Thanks, it can not go in to windows at all so cant edit registry
Click to expand...
Click to collapse
I could have cooked a version that applies the necessary calibration data via provxml.. but alas it's too late now
FAIROS_IPS said:
i make hard reset to my fhone,then i can't align my screen,i align my screen many times.nothing happen.
Click to expand...
Click to collapse
Yo! Got the same problem. Solution was 5 secs away: create empty file WELCOME.NOT on your PC. Then connect to ActiveSync, go to Tools -> Explore Pocket PC and copy that file to the root of a memory card and to the root of your system. Reboot. Yo-ho-ho!
its nothing happend to me au22ru.. anyone can help plz....
Thousand Thanks, I can skip this part and back to normal.
au22ru said:
Yo! Got the same problem. Solution was 5 secs away: create empty file WELCOME.NOT on your PC. Then connect to ActiveSync, go to Tools -> Explore Pocket PC and copy that file to the root of a memory card and to the root of your system. Reboot. Yo-ho-ho!
Click to expand...
Click to collapse
Thousand Thanks, I can skip this part and back to normal.
keep stic on points shown like addsign. not by hands
You guys walking around one main problem.
Touchsreen of your phone appears to be broken, when allign test is not passed its becames by fault of touchscreen. Doesnt matter what firmware do you use. Its just warrancy repair, if you have it. Mostly is replacing of touchscreen.
Donst listen to advises to pass this test is hardware fault.
Cheerz
hi, "welcome.not" worked for my samsung sgh-i780 very good.
I could start my phone without any alignment, but i'm sure, that in near future i will need to change touch screen.
BR
szysiek83
au22ru said:
Yo! Got the same problem. Solution was 5 secs away: create empty file WELCOME.NOT on your PC. Then connect to ActiveSync, go to Tools -> Explore Pocket PC and copy that file to the root of a memory card and to the root of your system. Reboot. Yo-ho-ho!
Click to expand...
Click to collapse
Thanks for this tip. Now I can use my phone till the touchscreen is replaced/repaired.
Yeap "welcome.not" worked for me. i connect the device with windows device center since i am using windows 7 . then i naviagte to the root folder of the phone and put a blank welcome.not file and reboot it starts with out asking the align screen and now my phone is working fine. no need of the touch since i have a full qwerty key and a senser mouse. thank you so much.
No way, it must work. It shouln't have 2 extensions 4 example : welcome.not.txt or similar. It should be just WELCOME.NOT.
@au22ru
It's not necessary to copying to root AND root of sd, it could be one root, but i preffer to have this file on sd, because after flash root of internal memory is deleted.
@yonylove
check the attachment. Unzip and copy to your sd.
heineken78 said:
You guys walking around one main problem.
Touchsreen of your phone appears to be broken, when allign test is not passed its becames by fault of touchscreen. Doesnt matter what firmware do you use. Its just warrancy repair, if you have it. Mostly is replacing of touchscreen.
Donst listen to advises to pass this test is hardware fault.
Cheerz
Click to expand...
Click to collapse
hi heineken,
This thread started 2 years ago, but is still relevant for people like me..
My i780 also have TS problem.. at first, it started small only. Align Screen takes about 5x before it aligns, works for awhile, then misalign again. Then I Align again, maybe takes 10x now, work for a while, then not work again. I even re-Flashed ROM.
Now, I try to align it I must have tried tapping crosshairs 100x already, wont get aligned. And I cant quit the Alignment screen so I take out the battery to power off then on again.
From what I understand,
#1.. TS is now broken, Hardware (Screen) problem? no other fix, as you say above?
#2.. This "Welcome.not" solution at first gave me hope.. I thought there is simple fix, until I understand it now.. I think now if I REFLASH Rom, the phone will first ask you to Align Screen and since i cant, Ill be stuck there forever, right? Even if I take out the battery?
Therefore as long as my TS is broken, I SHOULD NOT REFLASH or I will be stuck? Am I right? And if I do get stuck then the solution is "Welcome.Not". (At least there's a way out) Did I get it?
I can still use mouse and keyboard, but Im not happy because I have lots of apps that use TS. Like GPS software when Im driving, as well as many games. It even makes swiping or reading sms hard with defective TS.
Fortinately, I think I may have a solution for me.
I still have that old bricked i780 (dead) somewhere. I bought a replacement and this one Im using now has the defective TS. (Maybe because I buy it 2nd hand.. although it was working fine the first few months)
QUESTION: Can I take the dead i780 to a celphone technician and ask him to replace the TS panel on my current one? That should work, yes? Problem is many celphone technicians are not familiar with the i780 model, but they work with a lot of Touchscreen phones. This should be easy for them to do and it should work, yes? (unless it is a chip issue or something more technical)
The reason Im asking for advice is I want to be careful now who I allow to open up my phone and mess with it. I suspect the last time maybe my 1st phone could still be revived properly but I showed it to many technicians maybe along the way someone permanently killed it.
Thanks for any advice!

task manager always running and touch screen problem

helo all..
i got problem with my diamond..
task manager always popups, open and close and if i run program, it close automatic..
and the screen always hang, i can't use the touch, only can use the cursor..
(
help me please...
helpp
anybody?
have you tried a hard reset maybe the only thing that can help you now you will loose all your data so back up whatever you can.
i remember reading something about the diamond's touchscreen getting pushed in on one side making the resistive touch on that part of the screen too sensitive.
if i remember they said you can fix it by putting the diamond face down on a flat surface and putting some slight even pressure to re-align the screen.
definitely search this up before trying it as i'm just going off memory from something i read a long time ago
oh and definitely try a hard reset or even a different rom first.

Backlight problem.....quick help needed please....

A few hours ago i was browsing the xda portal when i found a thread about someone booting win 95 on his HTC Himalaya.... so i found it a little bit interesting so i want to try it out myself..... just few minutes later i googled some info and find out that need to increase my screen resolution by nyditot virtual display software....then i just download the trial version of it and try it on my BA.....however, my device wont pass the tricolor bootscreen(first one that is) and it just freeze there.....so i tried to remove the battery and luckily my device boot normally afterwards...dammit that app...so i go to settings and remove that sh**ty app..after that, i power off my device and put it into the cradle to charge it..my ba lights up as it detect the charging...but i just saw a white screen instead of a display...it shocked me and the first thing that i do was to soft reset it...however, after soft reset,i tried to power off and power on my phone..then the same as before a white screen,,,i also tried setting the screen to blank by using core player options... the screen didn't went blank as if it was powered off...but it seems that i can still see the display like just the backlight is turned out...however touching the screen wont do anyting....i need help asap as i need to use my device to finish my assignments...well the only possible solution that i'm seeing right now is just a hard reset...but i dont want that..recently just got everything working on my BA(wi-fi, mms, psx games,etc that i dont want to lose)help me , please.....
hfzarx said:
A few hours ago i was browsing the xda portal when i found a thread about someone booting win 95 on his HTC Himalaya.... so i found it a little bit interesting so i want to try it out myself..... just few minutes later i googled some info and find out that need to increase my screen resolution by nyditot virtual display software....then i just download the trial version of it and try it on my BA.....however, my device wont pass the tricolor bootscreen(first one that is) and it just freeze there.....so i tried to remove the battery and luckily my device boot normally afterwards...dammit that app...so i go to settings and remove that sh**ty app..after that, i power off my device and put it into the cradle to charge it..my ba lights up as it detect the charging...but i just saw a white screen instead of a display...it shocked me and the first thing that i do was to soft reset it...however, after soft reset,i tried to power off and power on my phone..then the same as before a white screen,,,i also tried setting the screen to blank by using core player options... the screen didn't went blank as if it was powered off...but it seems that i can still see the display like just the backlight is turned out...however touching the screen wont do anyting....i need help asap as i need to use my device to finish my assignments...well the only possible solution that i'm seeing right now is just a hard reset...but i dont want that..recently just got everything working on my BA(wi-fi, mms, psx games,etc that i dont want to lose)help me , please.....
Click to expand...
Click to collapse
Well, uninstalling nydiots might have messed some drivers up. Sorry to tell you this, but I think that your only option will be hard reset. BTW, I edited your post a bit... watch the language we have kids around the site, you know?
yeah, sorry bout that....i was really upset that time....but now i've found a solution....luckily i dont need to do a hard reset...i reinstall the application again(nothing much to lose...)and realised that in the application folder there was a shortcut named "vd restore"(what else should that mean...)used that and viola, everything was back to normal...then, later, i downloaded nyditot vd the latest version and it worked....just that it was too slow maybe because of the scaling...and titanium wont work...maybe it need it's own cpr....so i want to request anyone here who have it, vga titanium .cpr file please post it for me....will continue to explore what i can do with this application...and btw, thanks mr.egzthunder1 for replying....
Glad everything worked out

Categories

Resources