This morning I found my mdaIII dead. When I arrived at the office, I connected it to outlet power, but now the upper right led is steady red.
Could someone please upload an English manual in electronic format so I can look for a solution ? A soft reset does not seem to work.
Thanks !
Kristof
mda3 is the same as xda2s so the link is here:
http://www.my-xda.com/xda2s_spec.html#content4
or direct download for the pdf:
http://www.my-xda.com/downloads/Detailed_XdaIIs_Guide.pdf
hope that helps
cheers
Related
HI
first sorry for my english
But i have problem.
my o2 work perfectly but one time just stoped in windows ce. Then i restart using reset button and didn`t start. I see blue starting screen with red 3 lines versions but its no light vhen i connect to computer nothing happen. I try hard reset nothing. I try upgrade rom i can do it but still nothing
So after 4 weeks nobody konw what happen????
So this site is unusfull because uoy konw only how to do HARD and SOFT reset and thats it.
Nothing importANT AND USEFULL ON THIS SITE, Everybody are amateurs without any information.
CRAP SITE!!!
Many Thanx for help.
NOTHING
I sorted my problem wery easy ALONE
Bye
hey guys..
i'm a new member to this site and i found the things talked about a lot interesting.
and would like to try out some of them but currently i think i'm in a diff situation wherein i have a xda iis (blue angel) which has traveled down my family chain for the last few years.
i have absolutely no idea about anything in it.
and somehow it is in bootloader mode through the execution of the enterbl.exe file.
now i'm unable to restart it by hard reset. and am unable to connect to it through mtty.exe
i was looking around in google until i stumbled on here. i did find the information valuable here. but i couldn't find the part to help me out.
has anyone faced such a situation.
i'd be greatful if u could plz help me out.....
We'll try ...
Hey attractiveaki,
Welcome to XDA-Developers forums
We'll sure try to help a fellow BA user get round their troubles!
So, tell us, what have you tried so far?
Have you tried the information on the following page?
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_WM5_For_Beginners
And what about removing the battery overnight?
Watching and waiting...
Bird
thanks for the link but i already tried that...
i also tried to hard reset it a number of times but no use.
i tried to open it by connecting it to my laptop but i can't open it in mtty as well
gives an error that the port can not be opened.
also the bootlog mode automatically closes after a few mins and its difficult to come back to even this phase.
ryt now my cell is just completely switched off.
and another thing i had a windows mobile 2003 version not a windows mobile 5.
besides that i dunno anything ..
not even the language code or the area of purchase.
help me if u guys can..
How about this then ... ?
Try the following:
1) press the D-Pad centre button and then the mail button
2) press and hold the power button, then (keeping the button pressed) use the stylus to press the reset button - hold both for 30 seconds and release
Let us know what happens!
Bird
thanks for the tip but no use still....
i tried to remove the batterey overnight but its no use
then this method also is not helping.........
can i have it done at the local mobile shop.
or would that be useless as well...??
Only option
attractiveaki said:
can i have it done at the local mobile shop.
or would that be useless as well...??
Click to expand...
Click to collapse
Looks like it's your only option now!
I'd check the prices for a BA on eBay first, just to make sure that you aren't paying anymore than that to have it fixed!?
Sorry I couldn't help
Bird
Whats happening with the S?
I had one in 2004 and sold it earlier this year.
Could be the battery is not holding it's charge?
Does it power on when connected to a USB port/mains?
Hi every one.
I'm new. and i got a big mistake.
I upload wm6 to my H2200 IPAQ with MultyPort Software, and i lost my ppc.
I have no boot screen, hard reset is not working, bootloader screen also is not loading.
But when i hard reset that, only the bluetooth and charging light it will be off. and that set.
I know this is a very big mistake, but please help me.
Thanks.
Please help me... (
Hi,
I have read a lot of topics about my problem but I haven't found a solution.
I'll explain my problem:
I have successfully flashed a samsung i780 with the Heroes WM6.1 Final ROM using mirage 1.8.
The phone works well for a couple of days, but one day it crashes and I perform a soft reset. It reboots normally but the dispaly shows the touch screen calibration and the contacts are disappeared. So I think "This seems to be an hard reset!!" and it happens a couple of times.
The last time it crashes the battery was very low. So I shut down the pda and I connect the charger, but the red led doesn't turn on.
With the portable charger the battery charges without any problems, but when I insert the battery, the i780 doesn't power up.
I try every combination: fn + alt + power / power + red and green buttons / power + '9' button. The pda still dead and mirage cannot detect it.
Somebody can help me?
Thanks a lot and sorry for my english.
no idea?
somewhere i have found something about jtag connection..
did u try this http://forum.xda-developers.com/showthread.php?t=380723
@ironeagle
The device goes completely dead and you cant put it to bootloader mode, or anything at all for that matter. The device goes COMPLETELY DEAD - literally! The service guys told me it was a mobo failure.
@sfrangebob
I think inertiax did mention somewhere that someone was able to revive it using jtag interface. But for that you need to hack in at hardware level and flash the chip directly. This is risky and has no assured outcome!
let us know what happens....best of luck
it's not a problem for me hacking in the hardware level. I have a lot of experience in consoles (and electronics devices) hardware hacking, but I have to discover more about this jtag method.
Wich jtag adaptor should i use and wich software?
Where can I find this information?
Thanks a lot.
sfrangebob said:
it's not a problem for me hacking in the hardware level. I have a lot of experience in consoles (and electronics devices) hardware hacking, but I have to discover more about this jtag method.
Wich jtag adaptor should i use and wich software?
Where can I find this information?
Thanks a lot.
Click to expand...
Click to collapse
The biggest problem is to find JTAG testpoints for the i780. I have no idea how to find this, and it was only inertiax who had mentioned someone who had successfully used JTAG to revive a dead i780...so i'm guessing he should know where the jtag test points are located. Once you have that, i guess you can borrow the process from that of any other device as it should be more or less the same.
You can see this post -
http://forum.xda-developers.com/showthread.php?t=369681
You can download i780 sevice manual on the internet and find out the jtag test points.But there are two types of jtag test points on the mainboard.
perhaps this may fix up ...
took out / in the battery for several times ... do it quickly
then try to turn it ON ...
I got the same problem as you ...
but mine when I took out the battery or turn OFF,
it cannot be ON later...
so I repeat the battery in/out several times and its work ...
Hello,
2 Days ago i buy a Xtrons PE98MTVPL and it works great. Execpt one Function i have connect a Huawei e5577c to the USB Port. I have full Strength of my Internet Provider, but i dont have any downloads there is even no Icon for 4G, 3G or something else. It download nothing. It must work with LTE and Stuff because of my Stream on Package from my Internetprovider. The Data Volume dont increase if i use Spotify and some Stuff like this.
As i say, i have full strength of Signal, but no downlods......
i hope somebody here can help me and please excuse my broken English, i´m from Germany and speaks English not very often....
greetings
Sebastian
Hi Shidehara,
I'm sorry I don't have an answer for your problem but as I have the same unit as you, I would like to ask you if it automatically enters in stand by when you stop your car and take out the key.
Mine doesn't and if I change the options for "Shutdown delay when ACC OFF" it simply ignores it.
I'm using it in a Golf mk5 with Canbus.
Thanks in advanced.
Hey, yes if i remove the Key the Unit goes in Standby. On the backside at the main cable wire thing there is a little wire i think black/orange its written ACC on it. disconnect this wire from each other. It should work.
Thank you so much Shidehara, I will try that!
Done, it works perfectly.
Thank you so much
your welcome