Develop Bugs

Volume button + WiFi Problems + Touchscreen no reaction + Board computer problems

I have some questions. (Copy from the old thread)
1. I mean that i read it here, but I'm not sure. At the moment I have very often the bug, that the volume button not works. Mute works, but louder and quieter not. I don't know when it doesn't work, but after a while no function.
2. Since a few days I have the wifi problem, that wifi works sometimes and after a while too, it shows empty bars and shows the connection but it doesn't work. In other case if I start the radio he can't find any WiFi. Why?
3. Since a few days the touchscreen doesn't work. I have set, that i can See if i touch. Then it shows a point. so i can see that the touch works, but there is no reaction. After a minuten the radio shows the bootlogo and have a loop. So i have start the radio new with reset or power off from the car.
4. Since a few days if i turn off the key normally all lights form the radio and display shut down. Additionally board computer shut down too after a few seconds. Now the light from the dvd tray is on and board computer too (after a lock from the car too). I dont know why but I don't know if that is so good (Battery).
All this errors are since a few days. I tried to do any settings but the problem is always here. Does anyone no about that? I think it's an app, but I don't know which one. The last chance (if I get no solutions) is to install another rom? That is really crazy, because it's only since a few days. The days before it works perfect.
I have JY 2.73 with the Malaysk Rom from September (1024).
Thanks

Update: Now i installed 2.59 JY and tried again. WiFi will always gone with no bars. So i turn off and turn on again. At the most cases it works. But the problem is here again. The same with the touchscreen crash. 3G doesn't work. always no bars.
So the previous MCU doesn't work again. Maybe a software error.

Could you please try to measure the voltage alignedto the HU while you encounter those problems? I rellay mean at the radio side (so not at the battery poles).
Such issues could be lack of voltage. If not and flashing does not solve it could be a defective unit.
Just to ensure: You flashed Firmware AND MCU? AM I right wit this assumption?
If not: Try to flash a new ROM first (probably try Malaysk ROM)
Btw: Moved to Q&A

dark alex said:
Could you please try to measure the voltage alignedto the HU while you encounter those problems? I rellay mean at the radio side (so not at the battery poles).
Such issues could be lack of voltage. If not and flashing does not solve it could be a defective unit.
Just to ensure: You flashed Firmware AND MCU? AM I right wit this assumption?
If not: Try to flash a new ROM first (probably try Malaysk ROM)
Btw: Moved to Q&A
Click to expand...
Click to collapse
Thx for answer. How can i measure that? Do you know which cable it is? And if the cable shows not the 12V? What can i do to fix the problem?
Sure. I have Malaysk Rom and the MCU JY 2.59.

you would have to get amulti- or vooltmeter and attach that between plus and ground pins at your HU.
If you don't know how you should eigther try to follow another way first if possible or ask someone to do it for you (it's electrics)

dark alex said:
you would have to get amulti- or vooltmeter and attach that between plus and ground pins at your HU.
If you don't know how you should eigther try to follow another way first if possible or ask someone to do it for you (it's electrics)
Click to expand...
Click to collapse
Thanks. I ordered a multilmeter. Maybe it's the battery. At the moment the car works really hard if I start it. The radio takes so much battery but the radio is off. So that can be the problem.

low voltage can cause many weird problems but you have to know a new battery might not solve your problem!
If you have low voltag while the engine is ruunning then you have a different problem. eighter there is a connection issue somewhere on the path the energy takes from battery and generator to the HU or your generator might have a problem. But that is open to check when we know if it really is a voltage issue.

Hi,
i'd like to give you an update for my problems. Since the last days I have the problems, that my car didn't start. Now we see, that the battery is nine years old. Now I charged the battery (tomorrow I'll get a new battery) and the first test shows WiFi works for 3 minutes. I know - that's not a lot, but I only can try if I have the new battery. 3G doesn't work - always the same. But that's not so important for now.
At the moment I don't have the volume error. I will test it, If i have a longer car drive.
The problem with the touchscreen is actually. Since a few time, after few minutes the touchscreen is bricked and I see the points that i touch it, but I can't click anything. If I touch ten times, twenty times or often then radio shut down and shows the boot logo... forever... it doesn't boot again. So I have to make a hard reset.
And the last point with the light board computer and the light dvd slot after plug off the key is actually too. It don't shutdown the lights on the standby time from 10 minutes (set it to 10 minutes). I know now, that I can shutdown it completely if I press the volume button for 3 seconds. Than it's turn off. So it's a setting problem from the firmware?
Today I plug in the key - nothing. Radio doesn't start. So I looked behind the radio and saw, that one thin cable is not in the wiring harness and I can see the wires on the cable. So I tried to put it in the wiring harness again. I hope it works longer now. I wrote carjoying and ask for a new wiring harness. Maybe all problems will be fixed, If i have a new.

Hello again,
now I've got a solution for the wifi problem. I've tried to connected wifi - i Known that doesn't work only few seconds and after a few seconds it shows 0 bars on wifi... now I disconnected my 3g stick and LOOK it works... full bars, no losing connection. I connect 3g again and the same problem after a few seconds.
So th3 3g stick (E1750 from Huawei) makes some problem OR the usb cable?

Huawei E355 also not working. Same connection problems with malaysk rom MTCD
Any suggestions?

Erisin ES9746A RK3066 - No Wifi since road accident

Hi there,
Hope my post is in correct section and my english will be explicit.
So in first time, thanks to the community for all work done on this, i little mod my Unit with ur fantastic work.
In second time, i had an accident with my car on the road (a ****ing guy hit me on my rear left and do a 360° ...) and since that, i have no wifi with my unit, do cant update any app, can use my GPS (Waze), cant hear somes song and more...
When i try to put wifi ON, the slide go on "ON" during 5sec and after, go back in OFF. I check the M.A.C Adress and is blank, so, opening the unit for check the board and nothing seems to be brake.
I try to update my unit, android, MCU but nothing work, so i hope u can help me, cause Erisin dont reply to my problem.
Thanks

Hi
Did you checked if your wires are ok? Maybe the accident caused some connections to get loose.
Enviado do meu SM-T330 através de Tapatalk

I allready check but nothing seems to be broke.
I search for the card board détail for find wifi module but i didnt get them

Your USB chip died, just like mine did. Took away all that had something to do with usb, such as wifi, external disc option, 3g...

Nothing can be do for repair ?
The front usb work for u ?

Nitro-TecK said:
Nothing can be do for repair ?
The front usb work for u ?
Click to expand...
Click to collapse
None of the usb ports work because usb controller died on board.
First my wifi started to go off by itself, and soon enough nothing worked that could be connected to usb.
You should change the mainboard, or buy another device.
But first try factory reset.

In my case, front USB work (just the mini USB/USB cable move a lot, so i lost connection).
I allready try a factory reset and dont work too. For information, when i put WIFI dongle on USB Front, i can swap wifi ON too., but this dongle work on my computer.
Where i can find a mainboard ?

From your seller, I guess...

Carperformance.se Uconnect Android system help.

I am hoping I can find some help in here with a couple problems I am running into on this system that would make it so much better to me.
The system is basically an Android box utilizing the touch screen and monitor of my Uconnect 8.4 head unit. The naming in the settings is rk3188 and is running on KitKat 4.4.4, so it is some variant of the Android TV boxes. If there are other specs or info that are needed to help in possibly fixing my issues please let me know.
Issue 1: although not major, there is no option to have OK Google from any screen. Having this option for a car system is obviously something helpful. In the settings of the Google App trying to access the menu for OK Google detection doesn't work, so I can't even get to the screen where that option lives. I have the most up to date version of Google App and Google Play Services. I have Google searched on ways to fix this but nothing has brought that ability up. I know Android version 4.4.4 was capable of this. There was another app that utilized Googles voice engine and allowed this function but Google made him stop using their servers and killed that as an option.
Issue 2: this is the biggest bother to me and I could not find anything even related to what's happening in my searches. The system comes loaded with some apps and using Launcher3 for its front end, it has big buttons but offers almost no ability to customize it. The bottom row has apps that you cannot switch out to anything else, and 3 of them I will never be using. The system works but is not as nice as it could look or function. The obvious answer is to use a different launcher which is where the problem arises. I have tried to use Nova and Apex so far with the same very frustrating outcome. After the install everything is great, I can set the screen up to look amazing and add icons and functionality that really make it a great experience. So everything is working lovely then I shut my truck off and go do whatever. The next time I come back I start the truck up everything loads fine, the new launcher and everything I did to it is working just as expected until about 5 minutes in the screen goes black for a second and then the system goes through a factory reset. Really? Are you kidding me? The first couple times I thought maybe I hit something because I hadn't fully put my truck back together but after playing with it more and having the system factory reset 5 other times I have concluded it is related to changing the launcher. I tried Nova first, then I tried Apex with the same outcome and same sequence of events. Obviously it's annoying everytime testing this because updating and reentering my info everytime just to try the launcher again is time consuming. The last test the only thing I did was a different launcher so that has to be it, but why and how can I fix it?
If anyone has any clue how using a different launcher would cause a factory reset to happen please help me out. Or if there is anything I can do to this system to prevent that. My last resort thought would be to root it but I read someone else who has this system that rooting it caused screen layout issues and made things go 90 degrees off? The loaded apps in the system have touch screen calibration and screen resizing which might be necessary for this to function with the monitor.
Thanks for any help.

I spoke with someone else that has the system and they are not having any issues with running a different launcher so something happen to my particular device. I contacted the company and they will be getting me the firmware to refresh it and hopefully that fixes the resetting issue.

i am looking to get this also. I am very curious how you like the device - it looks great though a bit out of date. Waze & email should work well. How much storage does it have? Can you add a sd card or something?

RichTJ99 said:
i am looking to get this also. I am very curious how you like the device - it looks great though a bit out of date. Waze & email should work well. How much storage does it have? Can you add a sd card or something?
Click to expand...
Click to collapse
I'm getting a new unit sent out, it seems there are 2 versions and for whatever reason mine wouldn't let me customize the launcher.
But even though it's outdated, every app I tried worked just fine, they still install the latest versions. The system has 8gb of on board storage and a microSD card slot that is mainly for loading maps for offline navigation. I think you can still access it for other uses, but they have a better option for that. There is a USB input for flash drives or external drives. I tried my 2TB external drive on it and it accessed my movies fine from it.

How did you get it installed? Who?

got any pics?

Actually I would be interested in this too, I have an Alfa Romeo and the Uconnect 6.5 (european version) which isn't that great, it would be nice to attach a sort of box with ARM hardware running on Android and using the display and touch of the existing Uconnect. The question is, how this can be done?

http://www.dodgedurango.net/forums/.../24632-android-phone-uconnect-8-4-screen.html
I would check out this thread. It has two videos that walk you through the entire process - great info!

I also bought this latest Android system V4 2 weeks ago. Auto launcher pro app is very good working. At the moment there is a issue with the system time, which is not correctly synchronized with gps time. Carperformance Team is working on a fix for that. How can I get root Access for this Android 7 System?

Diabollon said:
I also bought this latest Android system V4 2 weeks ago. Auto launcher pro app is very good working. At the moment there is a issue with the system time, which is not correctly synchronized with gps time. Carperformance Team is working on a fix for that. How can I get root Access for this Android 7 System?
Click to expand...
Click to collapse
glad to hear i'm not going crazy with the clock but there is an issue.
I just bought and installed a V4 a couple weeks back too.
i must have left a loose connection cause i keep having to recall the touchscreen for android. I half-arsed the install cause we were leaving for a 2k mile roadtrip the next day- need to take it apart and do it right. Luckily you can connect a usb mouse in to trigger the calibration app.
id also love root- at the moment im trying to figure out if the one usb port is safe to connect an A to A usb cable into to get ADB. apparently on some versions of nvida sheild, you can. If they provide a firmware update for the clock fix then maybe that gets us an image to futz with for root.
a keyboard also works in teh usb port and i've tried a handful of key combos during boot to get to recovery but haven't stumbled on it yet.
I'll post back if i find anything

michaelk said:
glad to hear i'm not going crazy with the clock but there is an issue.
I just bought and installed a V4 a couple weeks back too.
i must have left a loose connection cause i keep having to recall the touchscreen for android. I half-arsed the install cause we were leaving for a 2k mile roadtrip the next day- need to take it apart and do it right. Luckily you can connect a usb mouse in to trigger the calibration app.
id also love root- at the moment im trying to figure out if the one usb port is safe to connect an A to A usb cable into to get ADB. apparently on some versions of nvida sheild, you can. If they provide a firmware update for the clock fix then maybe that gets us an image to futz with for root.
a keyboard also works in teh usb port and i've tried a handful of key combos during boot to get to recovery but haven't stumbled on it yet.
I'll post back if i find anything
Click to expand...
Click to collapse
Hi @michaelk
Good to hear that I am not alone here with this special system V4. Except for the issue with the system time and no root access, I am fully satisfied so far. I hope to fix it soon. If we had root access then we could solve this issue with the system time with some time apps ourselves.
Thank you for your experiences.
Best regards
Diabollon

wiring harness investigation
so played around some today.
I've got an issue where I need to recalibrate the screen almost every time I boot. it seems the box (or card added to the radio?) forgets things and only works the bottom right corner and also seems to rotate 90 degrees at boot. The end result is unusable screen. I think carperformance is just a reseller because of their response. They're friendly and reply quickly but are really unable to help. The first answer was just randomly fiddle with screen and try to find calibrate setting and reboot- that proved impossible and on my own I discovered a 6 dollar USB mouse from the Walmart could be used to navigate to the calibrate app. When I inquired again when it got more frequent they basically said it's not normal and offered no help except to adjust a personalization setting to run calibrate on boot- that only works once that I can figure (might be related to weird time bug)- so I settled on having tasker run calibrate on each boot. I wonder if there is a battery in the box that needs changing but the warranty sticker keeps me out for not- might add an external battery to keep it alive for a longer time to minimize the rebooting
Anyway took everything apart today to double-check and can't find any connection issues. I traced the harness a bit to try and understand a little and basically, the skinny cables run the daughterboard to snag the screen output and the touchscreen input. But i wanted to figure out what is tapped from the radio harness to the large white plug on the box and see if anything going on their .
DISCLAIMER- I NEED TO CONFIRM (it was hot - laughing) but basically seems what is tapped in radio harness is:
1) power and ground also
2) L&R aux audio signal- interesting here is they tapped a single ground (physically next to the right signal) for common. Earlier i had the RAX hack and their harness used a ground for each L&R and their aux input worked all the time without the little plugin shunt thing to trick aux input. When i dug some more and found a pin diagram from mopar I found that the 'left' ground is actually labeled "aux audio device detect signal" I need to play some more to see what happens but my guess is if we put a switch on that to short it to ground then the aux would just work to avoid the hokey plug.
3) Here's the fun- holding the screen to flip inputs could be the daughterboard running things. BUT since it also reacts to the left steering wheel button pack and switches inputs itself when you need the reverse cam- i figured it reads the can bus. and sure enough, it looks like it taps CAN IHS (+) and CAN IHS (-). Very cool that it would get into the whole bus and read anything- BUT since there are other FCA vehicles that don't auto-switch inputs on revers and they have alternate connections it seems the real dev is not involved to update things to sniff for other reverse signals. Reading around here- seems that there is probably a custom serial port someplace in the box that reads this and there's probably no documentation for us to do anything ourselves. But one can hope...
---------- Post added at 06:12 PM ---------- Previous post was at 06:07 PM ----------
michaelk said:
glad to hear i'm not going crazy with the clock but there is an issue.
I just bought and installed a V4 a couple weeks back too.
i must have left a loose connection cause i keep having to recall the touchscreen for android. I half-arsed the install cause we were leaving for a 2k mile roadtrip the next day- need to take it apart and do it right. Luckily you can connect a usb mouse in to trigger the calibration app.
id also love root- at the moment im trying to figure out if the one usb port is safe to connect an A to A usb cable into to get ADB. apparently on some versions of nvida sheild, you can. If they provide a firmware update for the clock fix then maybe that gets us an image to futz with for root.
a keyboard also works in teh usb port and i've tried a handful of key combos during boot to get to recovery but haven't stumbled on it yet.
I'll post back if i find anything
Click to expand...
Click to collapse
So the spec for the chipset for the V4 says it can handle an OTG port and a couple (maybe 3?) other USB ports. Obviously, the box only has the one USB A port visible on the pigtail. I wish we could get in the box and look for a header for the OTG port to help rooting but.... the darn warranty sticker.
on the FCA/Dodge side of things- I have a Durango with a USB port and SD card reader in the dash (USB Media "Hub" Apparently, FCA uses USB Mini B connectors to interconnect all the ports and the radio. They use latching connectors that are keyed but if you undo them there's a standard USB mini B in there. They do some odd male/female things so you have to pay attention to where you undo cables, but bottom line you can undo the connector on the back of the dash's USB port and stuff a USB mini B female on it and connect it to whatever host device you want.
I first tried an old laptop in case there's anything weird going on. My Dash "Hub" actually has 2 mini-B connectors and a multipin auto harness. Without the harness when you connect it to windows it sees a USB Hub, but the USB port was still dead. So I assumed it needs power from the harness on the back of the dash hub and connected that. UP popped up a USB mass storage device which I believe is the SD card reader- didn't get around to confirming and then the USB port also comes to life. Knowing that it was safe at that point I connected it to the USB A Host port on the box and presto chango now I have the in-dash port connected to the android tv box without any exposed wiring.
Connected the "android auto dongle" through the cars USB port and that works perfectly. I ordered a used 2 USB dash hub from eBay (later model years have 2 and will see what that does. The pictures of that also show the 2 mini B ports- I'll play some more when I get that. I'm not sure what is in those dongles but from the other folks hacking android auto into older models (by using newer radios) apparently, one port works for android auto and the other doesn't. The scuttle is its a body module programming thing but I wonder if maybe there's something physical in there and so the dongle won't be necessary any longer with the new hub? My other thought is if the two USB min B jacks allow you to connect to 2 different hosts- I would try one on the original Uconnect (in case I ever need to update the software) and the other for the android TV box.
So apparently the android tv box handles hubs just fine. As I mentioned earlier it handles a mouse or USB keyboard fine. Also, I played around and connected my hotspot by USB instead of wifi so the device sees it as a modem and that works just fine- so I assume a USB modem works out of the box too. (again odd if that works that carperformance sells a hotspot and not USB modem- like they don't know what the box can do)

I disassembled my display 2 times until it worked. After the first start, I had a black screen. I thought that was it... After 3 times it finally worked. I also had a cable on the plug which has easily resolved. I think you will also have a loose contact somewhere. One time I also had the display calibration gone. Then I connected my old usb keyboard and could then start the display calibration. I reset the system before. So far, the system works without problems. I also have a passive 4-way usb hub to connect.
I have already connected cables for the frontcam but have not yet moved into the engine compartment.
In the video tutorial of Carperformance, you can see when you switch to drive, the display then changes to the frontcam or signal from the cam, but the display does not change to the Frontcam signal with me.
Do you have with you the signal on the display of the camera when switching to drive?

Adw2 = bad mix
Went back and forth many times in email and turns out my calibration issue was probably all ADW2 launcher, guess it conflicts with whatever app they use to communicate with the display.
in the process of troubleshooting I got the update zip for the current version but I don't think those have recovery partition in there and so can't help root? I need to read some more.
I've ripped everything apart like 12 times with the screen, so that my front cam is not connected right now. For the brief time I had it, it was connected to one of the smaller video in pin connectors and don't think it worked in drive by itself, but can't really say for certain. I think certain models can't get the canbus command to see reverse and if I understand they connect in to the video in on the main connector and then use a point on the car that is energized to trigger the switch on that connection. If your adventurous they seem to have to flip a dip also. I think it's the Cherokees or maybe grand Cherokee so maybe Google their thread's? This site gives connector pin outs
http://connectors.dcctools.com/home.htm
There might be a lead for the drive on your shifter if lucky. I think I read the reverse shoulder comes from a body control box in the passenger wheel well?
Also they're super friendly and never wrong when you email but they can be brief. So you could ask if there's a dipswitch to flip to enable auto switching one of the inputs. Hec maybe we should just ask for a table of where the dips do...
(Sorry for any typos... Will try to edit later)

Supposedly it is enough to connect the extra input cable for DVD or CMMB. That answered me Carperformance. Before, I had no external input cable connected. That's why no signal came. The OEM rearcam works flawlessly.

Also, I forgot, they have a workaround for the clock bug
For the clock there is a fix
https://www.youtube.com/watchv=3OEEbah53QY&t=1s

michaelk said:
Also, I forgot, they have a workaround for the clock bug
For the clock there is a fix
https://www.youtube.com/watchv=3OEEbah53QY&t=1s
Click to expand...
Click to collapse
Unfortunately it's not available.

Diabollon said:
Unfortunately it's not available.
Click to expand...
Click to collapse
try this-
https://www.youtube.com/watch?v=3OEEbah53QY&t=1s

michaelk said:
try this-
https://www.youtube.com/watch?v=3OEEbah53QY&t=1s
Click to expand...
Click to collapse
It's a cheaper fix but so no solution. Carperformance should offer a software update with root access. Then we would be satisfied. We should expect it for the money.
My frontcam is working now good.
You already tried Android auto? Which USB dongle do you use? Do you need a special app for this?
My China usb dongle does not want to connect properly with my oneplus 6T.
Edit:
Android auto is working with Pumpkin USB dongle and autoplaybox app. The noname China scrap goes back to shop.
The time fix is working until now also. Thanks for this info. The carperformance, they wrote or informed the affected people who ordered it. I did not get any info.

Diabollon said:
...
My frontcam is working now good.
...
Click to expand...
Click to collapse
besides powering your camera and connecting the yellow RCA video signal did you have to do anything else?
something with the red signal wire maybe?
I cant consistently get a signal on my front cam and not sure if the camera is bad or my setup
---------- Post added at 12:55 PM ---------- Previous post was at 12:42 PM ----------
few other notes for others-
FCA "aux audio device detect signal" harness line is actually normally closed (I think shorted to ground)- if you break the connection the oew radio flips right to aux in. make the connection again and it flips back to previous input.
the in dash usb port is infact a powered hub. I originally had a usb + SD card combo and replaced it with 2 usb port and works fine. FCA uses mini b connections to it- just use a usb a to mini b cable to connect it to the android auto box and your indash usb port(s) will work on android auto (And provide more watts to charge your stuff). oddly either dahs hub has a second usb mini b connector that i played around with a little but never could figure out what it does
more can bus fun! - i updated the dongle firmware on the android auto dongle sold direct from carperforance and now it has a beta feature to map buttons. somehow it seems to be sniffing the canbus through the android tv box. it has arrow keys, numbers, enter, etc and you use the app to select the input to assign then you press the same button on the car twice- it sniffs the signal and assignes it. I My durango has the button packs on the steering wheel and i was able to assign up, down, left, right and get it to have the android auto respond. Need to play more but i think it actually goes android wide. For example i think the down button on my steering wheel was sending page down to the chrome browser i had open on the box. Pretty cool stuff if they expand that.

Problem with Radio stock app that doesn't keep channels and other little issues

Hello all!
I recently bought a android head unit that runs android 5.1.1. (MCU: MTCD_MX_V1.73_1, Kernel 3.0.101+) I have several little problems, one of them is that the radio app that is provided doesn't store any channel that I save after a turn off turn on. Is it something that can be solved or the best is to use another radio app? Maybe you have good examples?
More generally it seems that every-time I turn OFF, it loses the time (it goes back to some random date in 2012 at 00h00).
The GPS also seems to loose the ephemeris and needs to download them every-time, I get a fix after 10 to 15 minutes after turn on is it something normal?
Any help would be much appreciated!
thank you!

What kind of vehicle did you install it in..?
You probably need a canbus harness for your car or run a accessory power from your cigarette lighter + wire..

Cid6.7 said:
What kind of vehicle did you install it in..?
You probably need a canbus harness for your car or run a accessory power from your cigarette lighter + wire..
Click to expand...
Click to collapse
Thank you for answering me! My car is a Citroen DS4, I have installed it with the harness and everything (can bus decoder box etc) provided.

Problem with Hizpo radio

Good morning!
I have bought a Hizpo Android radio for my Mercedes Benz Vito w639 (2012). This car haven't got steering wheel or controller for the radio, so I installed it without canbus (as the seller told me) and connecting Illumination and ACC directly to the car, bypassing the canbus.
The thing is that It started working perfectly the first day, but after some time the radio started to do really weird things, like resetting alone or getting looped on the startup showing a black screen with backlight on. Sometimes it works again for 1 day and after that starts again to fail. Anyone knows what is happening? I tried to access the recovery mode for trying a wipe, but I don't know the proper combination of buttons (this radio doesn't have physical buttons, only a reset button).
I don't know if in this forum is allowed to post the link of the website where I bought the radio, but if it's possible just tell me and I paste it.
I have a video of what happens when the radio starts to fail, but I cannot link it already to the post cuz I have less than 10 posts :crying: If you need them for helping me just tell me and I will send you a PM!
Thx for your help!! :laugh:

Nithilgan said:
Good morning!
I have bought a Hizpo Android radio for my Mercedes Benz Vito w639 (2012). This car haven't got steering wheel or controller for the radio, so I installed it without canbus (as the seller told me) and connecting Illumination and ACC directly to the car, bypassing the canbus.
The thing is that It started working perfectly the first day, but after some time the radio started to do really weird things, like resetting alone or getting looped on the startup showing a black screen with backlight on. Sometimes it works again for 1 day and after that starts again to fail. Anyone knows what is happening? I tried to access the recovery mode for trying a wipe, but I don't know the proper combination of buttons (this radio doesn't have physical buttons, only a reset button).
I don't know if in this forum is allowed to post the link of the website where I bought the radio, but if it's possible just tell me and I paste it.
I have a video of what happens when the radio starts to fail, but I cannot link it already to the post cuz I have less than 10 posts :crying: If you need them for helping me just tell me and I will send you a PM!
Thx for your help!! :laugh:
Click to expand...
Click to collapse
What did the reseller suggest when you contacted them for support?

marchnz said:
What did the reseller suggest when you contacted them for support?
Click to expand...
Click to collapse
Nothing at all, He didn't answer my messages at this moment.

hello....I keep getting this error code: 001, does anybody has a solution?