Related
Thanks in advance,
I'm using the TNT 2.0 rom for hy hermes......I've been using the rom for a while with no prob. Today, I had to do a soft reset...my hermes stockes at the WM6 home screen page and does not want to acces windows.....What should I do....
Thank you fo the help.
i'm using spl2.10
sounds like you might have to do a 'hard reset'.
this will reset your ppc back to the base TNT rom you installed, so you'll have to reload everything you've put on since.
to perform a hard reset, hold down both left and right soft keys at the same time and stick the stylus into the hole in the bottom (where you'd do a soft reset) all at the same time.
to help you find out which program might be causing you problems, it's a good idea to load them one at a time and soft reset after each install.
good luck!
it should be a 3rd party caused this, what did you install??
Thanks for the help,
I did a hard reset....by holding the green and the red ( on / of ) phone and the soft reset....nothing, I did not load any 3rd party software....
it loads the 1st TNT screen where we see the arabic words...then it turn to the WM6 welcome screen and it stays there.....does not want to load window.....
Thanks for the assistance
PS. it happend when I did a soft reset this morning.....I'm using TNT form almost 3 weeks now.
its right said:
it should be a 3rd party caused this, what did you install??
Click to expand...
Click to collapse
I've seen the same thing on my Hermes, nothing installed. After 5 or 6 reboots, it hangs and that is the ball game.
I'm sorry I cannot offer any more information than that
is this means that my Tytn is gone. ! ! !
Can't I bypass the WM6 welcome screen and enter a ' safe mode' so I can
re-flash it?
Thanks for your assistance
PS. It's true, I just remembered that 2 weeks ago, I installed Skype as a thrid party
just do a hard reset and you'll be fine
lcohen999 said:
just do a hard reset and you'll be fine
Click to expand...
Click to collapse
could you pls tell me how to do a real Hard reset....Thanks
I did pressed on the left and right (phone) button + stylus.....but still same result...I'm stock at the welcome screen
yassou said:
could you pls tell me how to do a real Hard reset....Thanks
I did pressed on the left and right (phone) button + stylus.....but still same result...I'm stock at the welcome screen
Click to expand...
Click to collapse
we thought you know how, please go to wiki and you will learn every thing.
It's back.....THANK YOU
Thanks guys,
I was pushing the bad buttons......I hard rested and it's all good....
Many thanks
Hi Guys...
This is going to amke me sound like a right noob...
I have an O2 XDA IIs, but need to remove the O2 theme from it as i have unlocked it and put a different flavour of Sim Card in it.
When i bought th phone it didn't have the O2 theme on it, but them the battery ran flat and when it reloaded after being charged...It had the O2 Theme on it.
Any Advices would be apreciated.
Cheers Guys
Hard reset the device and when it boots up sit with it, at the end of the customisation it will offer a screen to install personal mode or Corporate mode, select Corporate mode and enter the numbers 0506 as the password, this will stop the device loading all that useless crap on to it.
Make sure you sit with it though as the default is to time out and install personal mode thus putting the crap on the phone - Mike
bring this back to life...
ok...i tried to hard reset the phone following instructions i found elsewhere...
but i cant get it to hard reset...
anyone got any advice...that isn't smash it with a hammer or throw it out the windew?
Its on its last chance now...getting fustrated with it!
Please help..
Thanks.
since it's WM2003(se)...
just take out the main battery and leave the backup battery to drain.
it will eventually hard-reset.
If my Blue Angle have WM6 on it, how to hard reset it, because it hangged till now
youdee said:
If my Blue Angle have WM6 on it, how to hard reset it, because it hangged till now
Click to expand...
Click to collapse
using the search function will lead you primarily to your solution.
it's the first step....
posting by not searching will lead to some sarcasm such as this post. haha.
before i give you this procedure and this procedure
Hard Reset
Kenbo23 said:
ok...i tried to hard reset the phone following instructions i found elsewhere...
but i cant get it to hard reset...
Click to expand...
Click to collapse
Do Soft Reset while holding down the power button
Regards
Smurf
I have a problem with my Artemis. I'll try to decribe the problem and if anyone can help me i will be thankful.
When is Power on it works few minutes than it freeze and screen desapears. After that I try to power but it doesnt work. It needs time to accept the Power comand and I don't know where problem is... (i thing that it's about temperature but i'm not sure)
I tryed to flash with later software and win mobile 5 but the same thing happens.
Any help?
Please specify which applications you have installed and eventually which ROM.
I strongly recommand you to flash your device with latest ROMs like Black and Blue one or others (see the Windows mobile 6 section of Artemis)...
A hard reset would solve your problem anyhow I suppose.
Are you overclocking your CPU with some software? like BatteryStatus for example?
Please let us know...
Gues i fixed the problem
It not was about ROM... I have tryed flashing with Black & Blue, Vanilla etc. but the problem was the same. When I put the Phone in the pocked it freezes. Meybe it was problem with cooling.
Anyway I used a tutorial how to upen the phone, i opened it, cleaned it (using spray for clean) and now it works fine i gues.
Thanks a lot...
Regards
rrezarthajrizi said:
It not was about ROM... I have tryed flashing with Black & Blue, Vanilla etc. but the problem was the same. When I put the Phone in the pocked it freezes. Meybe it was problem with cooling.
Anyway I used a tutorial how to upen the phone, i opened it, cleaned it (using spray for clean) and now it works fine i gues.
Thanks a lot...
Regards
Click to expand...
Click to collapse
can you please put that tuturial in this post????
thanks
jayss said:
can you please put that tuturial in this post????
thanks
Click to expand...
Click to collapse
Wiki is your friend....
http://wiki.xda-developers.com/index.php?pagename=Artemis_Disassemble
I had the same problem with mine....
The phone is fecked take it back to the makers and get a replacement..
I had the exact same problem with my P3300. It's a malfunction in the Motherboard. I've called the dutch helpdesk and because a hard reset didn't do much good the PDA was picked up later that day to be sent to Eurotwice, the repair station in Belgium. I got my phone back 2 weeks later, I started it and it froze again! So I immediatly called HTC Netherlands and again, the P3300 was picked up by UPS that afternoon. The second time I wrote a letter to the repair station and sent it with my phone. In another topic on another website I read that some other phone with the same problem had been fixed by replacing the motherboard. I got my phone back today and it works great! It hasn't crashed today, and I have confidence it won't in the future. So my tip to you and anyone who experiences this problem: Call the HTC helpdesk in your country and ask them to sent your PDA to a repair station. It might take a while but they fix it well! By the way, you have 2 years full garantee so it didn't cost me anything! Great service from HTC!
Had the same problem.
Power was on, then de screen went black and stayed black even after pushing the right upper side button. Had about 4.90mb free storage memory on the phone and 200mb on my card left.
Soft reset didn't work but a hard reset did!
I have the same problem for the last week
I tried to change Roms to original and back to manila, the same problem.
the artemis freeze suddenly without ant reason. after calls, before calls..
it's not wake up and it's show a blank screen. after few soft reset and battery replacement is wake up and work fine till the next time.
for now , I'm work with doppod original rom wm5 but no WIFI.
I think it started last week when I installs "B&B 5.0 love" rom, before that It work fine with pdviet manila2D.
problem upgrade my rom
I'm now have a O2 UK roms on my device.
I try update it to Touch 4.02, with the UPSL but it no working.
the bar with percents jump from 0% to 100% in sec. and I still having the same rom.
I read the uspl guide.
can yo uhelp me ?
i posted the begining of my problem somewhere on monday but cant remember where. so.....
on monday, the screen on my tmobile dash messed up, now the top half of the screen has white horizontal lines covering it.
well, i called tmobile and the phone was still under warrenty, so got a like new phone sent and it arived today. I went about unlocking it and upgrading to wm6.1 like i had on my last phone. started out with all sorts of problems sycning and i had to reinstall active sync and that seemed to fix it. continued installing the upgrade, the dos program runs i press the center button and i get the red blue green screen and i know from before that that normally means it isn't working, so i reboot the phone, re sync, and re do it and get the red green blue screen again and the update program says it can recover and it leads me through a four step process, upplug, pull bat, reboot and do it again, only it reboots into the red green blue screen, wouldnt sync and when i turned it off, i couldnt get it to power back up. no response from the phone at all. pulled battery many times and all.
What are my options? I know that i agreed to the statment and i have no one to blame but my self. is there anything i can do? i have 7 days to return the half working phone, and i have a feeling that because its unlocked and has wm6.1 on it that tmobile is going to charge me what ever it will be. I have 200.00 in credit with um, and i feel that those fees will take away from that, leave me with an un usable phone, and no money to do anything about it !
a brainstorm, could i just tell tmobile that i got the phone that way? or would they see through my lies?
please please please please help!!!
and thanks a ton in advance.
Nick
NJDubois said:
i posted the begining of my problem somewhere on monday but cant remember where. so.....
on monday, the screen on my tmobile dash messed up, now the top half of the screen has white horizontal lines covering it.
well, i called tmobile and the phone was still under warrenty, so got a like new phone sent and it arived today. I went about unlocking it and upgrading to wm6.1 like i had on my last phone. started out with all sorts of problems sycning and i had to reinstall active sync and that seemed to fix it. continued installing the upgrade, the dos program runs i press the center button and i get the red blue green screen and i know from before that that normally means it isn't working, so i reboot the phone, re sync, and re do it and get the red green blue screen again and the update program says it can recover and it leads me through a four step process, upplug, pull bat, reboot and do it again, only it reboots into the red green blue screen, wouldnt sync and when i turned it off, i couldnt get it to power back up. no response from the phone at all. pulled battery many times and all.
What are my options? I know that i agreed to the statment and i have no one to blame but my self. is there anything i can do? i have 7 days to return the half working phone, and i have a feeling that because its unlocked and has wm6.1 on it that tmobile is going to charge me what ever it will be. I have 200.00 in credit with um, and i feel that those fees will take away from that, leave me with an un usable phone, and no money to do anything about it !
a brainstorm, could i just tell tmobile that i got the phone that way? or would they see through my lies?
please please please please help!!!
and thanks a ton in advance.
Nick
Click to expand...
Click to collapse
Okay do this, make sure the phone is off and hold the camera button down for about 5 seconds... this button is located to the right of the keyboard. While still holding it down plug in the phone to the usb and now you should see a tri-colored screen come up. Now you can load the original rom the phone came with... The official roms could be found in the link below... called "official roms" and just download the t-mobile rom... and now you can flash your phone with the original rom...
stonersayswhat?
gixxum said:
stonersayswhat?
Click to expand...
Click to collapse
quis-ego....
anyone seen the other half of my thought from the other night? anyone?
Ok, I had found a forum post saying to hold down the SYM button, but couldn't get it working untill I read your reply. Much thanks, the phone is on, and giving me the red green blue screen. I hear the windows alert saying a USB device is plugged in, but active sync wont pick it up. So I'll post about it here, and while I dig through the internet trying to find my cure, I will hope that someone will know what my next step is.
Much much thanks jdoggraz! At least now I know my phone isn't completely dead!
Nick
jdoggraz already told you what to do. YUou do not have to wait for active sync to pick the phone. Just run the exe for the orginal rom.
I have tried to do a hard reset.
Hold the 2 softkeys down(the "-" on each end) for a few seconds, hot the power button down for 2 seconds and then hold the 2 softkeys down and wiat, but nothing happens. Donno why, but may be not being able to hard reset is a clue to whats wrong.
[EDIT]
I have found something about a program called Mtty.exe, and also a UNI_ExitBootLoader But I get a "un able to connect to usb" error with both programs when I try to connect. But, once again, every time I plug the phone into the computer I hear the alert saying a usb device has been attached??
[Another Edit]
I just noticed in Device Manager, under Window CE USB Devices, that my Smartphone USB Sycn Has that nasty Yellow explanation mark next to it.
This device cannot start. (Code 10)
Click Troubleshoot to start the troubleshooter for this device.
?
NJDubois said:
I have tried to do a hard reset.
Hold the 2 softkeys down(the "-" on each end) for a few seconds, hot the power button down for 2 seconds and then hold the 2 softkeys down and wiat, but nothing happens. Donno why, but may be not being able to hard reset is a clue to whats wrong.
Click to expand...
Click to collapse
why are you resetting it? you were at the bootloader screen in your last post...right where you needed to be. now you are 2 steps back?
Sorry guys, I guess I wasn't getting a refreshed look at the forum post, and I didn't see any other posts. I went back to what I was told to do in the first place.
I first tried
1.33.422.1 (Worldwide English, WM6)
1.27.405.1 (Worldwide English, WM6)
With both I get:
ERROR [224] : INVALID MODEL ID
This update utility cannot be used for your smartphone. Please check your Update Utility.
And in the lower right there is a string of characters that is different every time.
What am I doing wrong? I'm so frustrated. I followed your instructions =(
[EDIT] OMG I am an idiot, ignore this post. If I wasn't so beat I might have scrolled down and noticed the tmobile DASH!!!!!!!!!!!!!!
NJDubois said:
Sorry guys, I guess I wasn't getting a refreshed look at the forum post, and I didn't see any other posts. I went back to what I was told to do in the first place.
I first tried
1.33.422.1 (Worldwide English, WM6)
1.27.405.1 (Worldwide English, WM6)
With both I get:
ERROR [224] : INVALID MODEL ID
This update utility cannot be used for your smartphone. Please check your Update Utility.
And in the lower right there is a string of characters that is different every time.
What am I doing wrong? I'm so frustrated. I followed your instructions =(
[EDIT] OMG I am an idiot, ignore this post. If I wasn't so beat I might have scrolled down and noticed the tmobile DASH!!!!!!!!!!!!!!
Click to expand...
Click to collapse
pass the hookah brother..i wanna hang out in your world
puff, puff, give... man!....you're [email protected]#ing up the rotation!
An update.
I have gotten wm5 installed and working on my phone. I can't for the life of me get the 6.1 update to work. I get the agreement, press the center button and it goes back to the OS, the phone then locks up, and I have to restart it to re sycn.
This is very time consuming! The phone takes for ever to start. I also want to note that I upgraded my last dash with little problems, but this dash has been nothing but a head ache. WHY?!?!? I am not looking forward to being stuck with this phone.
Thanks everyone, for all the help. I went a little off course last night, I was falling asleep trying to get this thing working.
puff puff pass
nick
[EDIT] Why wont the screen go almost white after i click the middle button?!?!?!?!?
It works, YAY!!
Thank you soooo freaking much, everyone!
NJDubois said:
It works, YAY!!
Thank you soooo freaking much, everyone!
Click to expand...
Click to collapse
No problem, so what exactly did you end up doing?
damn! it's "cashed"!
pudgedaddy said:
damn! it's "cashed"!
Click to expand...
Click to collapse
hahaha
So, here is the deal... my stepfather has this phone, but for some reason it doesnt work anymore, he told that the did format something like that.. lol I have NO idea what is wrong with the phone, but what happens is this...
I Power On the Phone and it only shows me a red / green / Blue big bars colors, then a small one in white saying USB,
In the red one says IPL 3.13.0001 and SPL 3.13.0000.. so.. what can I do?
I have no idea really.. i already tried to search information but.. nothing :/
Can anyone help me pls?
Thanks.
LMOF said:
So, here is the deal... my stepfather has this phone, but for some reason it doesnt work anymore, he told that the did format something like that.. lol I have NO idea what is wrong with the phone, but what happens is this...
I Power On the Phone and it only shows me a red / green / Blue big bars colors, then a small one in white saying USB,
In the red one says IPL 3.13.0001 and SPL 3.13.0000.. so.. what can I do?
I have no idea really.. i already tried to search information but.. nothing :/
Can anyone help me pls?
Thanks.
Click to expand...
Click to collapse
first of all turn the device off and then loose battery and SIM card, wait a while (approximately 5 to 10 minutes ), replace the batteries only on the device and make sure your device goes into bootloader by pressing the Power and ( recorder ) Voicedialer buttons simultaneously, and using stylus at the same time to press the RESET button on the left. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears.
then connect the war with the PC via usb device ActiveSync and reflash with the official Rom htc Artemis
One really lame question.. but how i put the original rom in the phone? i have only one .exe.. i tried the update rom and everythign else.. I am completely lost :/
Can anyone tell me where is one tutorial something like that? I tried hard reset and everything else... grrr oh god how I love my SGS... lol.
I really not understand this phone.. is confusing for me.. no idea.. sorry. :S
And Hakim Rahman thank for trying help me.
No one can give me a little help? :s Pretty Pls... ;p
Thanks.
Go there http://forum.xda-developers.com/showthread.php?t=870041 and try to read carefully all pages (6 of them in total) with all the posts.
there is an answer for you, you will have to post there i believe to get it.