problem in Beaming(ing) using i-mate PDA2K - MDA III, XDA III, PDA2k, 9090 General

I am using i-mate PDA2K with Windows 2002 but I couldn't send any bluetooth
message so far?
i use the file explorer to browse the vailable bluetooth devices near to me
but it's just showing Searching and nothing happens after that?
what is the problem?

Related

ActiveSync connection

Hi,
I got my new QTek 9090 and created successfully a bluetooth bond for ActiveSync. ActiveSync works fine, but I miss an entry in the menu "Tools" of ActiveSync that lets me connect to my computer.
On my QTek 2020 I got a menu-item that says "Connect via bluetooth...". When I tap that item, my PDA connects to my computers and start to sync. On my QTek 9090 I can't find a similar menu-item!
How can I add this?
Thanks in advance!
Sam
I noticed this too as a difference between the XDA II and the M2000 (or XDA IIs)
They only way I can see to initialise the sync from the phone is to go into the bluetooth manager, tap and hold on the activesync connection (pairing) and select Connect, which kicks off activesync.
Hi,
Anyone got a suggestion to create a kind of a shortcut to this?
Thanks,
Sam

New user. O2 XDA IIs. Sending files via bluetooth problem

Hi
just got my O2 XDA IIs
on my old ipaq, to send a file via bluetooth i just taped and held till the menu came up, then chose 'beam file' and after a few seconds up came a list of active bluetooth devices... this XDA doesnt seem to do that. it just doesnt find anything on the list.
so how do i send files via bluetooth?
thanks
Re: New user. O2 XDA IIs. Sending files via bluetooth proble
jedi-knight83 said:
Hi
just got my O2 XDA IIs
on my old ipaq, to send a file via bluetooth i just taped and held till the menu came up, then chose 'beam file' and after a few seconds up came a list of active bluetooth devices... this XDA doesnt seem to do that. it just doesnt find anything on the list.
so how do i send files via bluetooth?
thanks
Click to expand...
Click to collapse
Check this thread, its what your looking for: http://forum.xda-developers.com/viewtopic.php?t=17976&highlight=
update your BT stack from bt3500 to bt3900 below
copy and paste it to your pocket pc, and click on it when its on your device, it will install the newer version onto your device and when you want to send by bluetooth, click send via bluetooth, instead of beam file
update your BT stack from bt3500 to bt3900 below
ftp://xda-developers.com/BlueAngel/CAB_Files/Bluetooth Upgrades/
click - send to your device and click on it.
then will install
password and user is XDA

Using PAN and Internet Sharing

Maybe I am missing something here. I used to use the DUN with my 8525 and never had a problem with my laptop. I flashed today with XDA .20 and can not figure out how to work the new PAN. I tried everything and just can not get it to work. Am I missing something?
Use the internet sharing app. If you are tethering via USB make sure to disable bluetooth or your device won't get a DHCP lease from the PAN driver.
I have a problem connect Via bluetooth using Internet Sharing with all version of WM6. When pair with the PC, the PC can only transfer file with my 8525 only. But when using Cingular 3.3 aku my PC can find Serial port profile and connect to Internet Sharing.
Does anyone know a registry fix for this?, I am using a Sony laptop with build in toshiba bluetooth stack. When went back to 3.3 aku internet sharing Via bluetooth work again.
Thanks
tandao said:
I have a problem connect Via bluetooth using Internet Sharing with all version of WM6. When pair with the PC, the PC can only transfer file with my 8525 only. But when using Cingular 3.3 aku my PC can find Serial port profile and connect to Internet Sharing.
Does anyone know a registry fix for this?, I am using a Sony laptop with build in toshiba bluetooth stack. When went back to 3.3 aku internet sharing Via bluetooth work again.
Thanks
Click to expand...
Click to collapse
Now I dont feel so bad - this is exactly what is happening to me.
bluetooth PAN does NOT works with toshiba stack! upgrade your laptop to Vista and don't install toshiba stack! Vista (microsoft) stack works!
netnerd said:
bluetooth PAN does NOT works with toshiba stack! upgrade your laptop to Vista and don't install toshiba stack! Vista (microsoft) stack works!
Click to expand...
Click to collapse
I have vista and winxp with toshiba stack on the same laptop (dual boot), both doesn't work with all version of WM6 available here, but it work with 3.3 aku cingular rom.
Where can I find MS stack? when I unintalled toshiba stack, all the driver for the bluetooth is gone.
Edit: Thanks for the tips, I finally get it to work VIA bluetooth, the problem is the toshiba bluetooth stack. I uninstalled the toshiba stack, and do and manually driver installed and choose Toshiba as the manufacture, and intergrate bluetooth, Vista find a driver for it and activate the MS stack.
The issue with the Toshiba stack is this:
The auto discovery is the only way to set up services. However, the PAN service doesn't display unless the devices are paired. Toshiba can only Pair with devices seen during discovery....
Its a damn catch-22....
Sleuth255 said:
The issue with the Toshiba stack is this:
The auto discovery is the only way to set up services. However, the PAN service doesn't display unless the devices are paired. Toshiba can only Pair with devices seen during discovery....
Its a damn catch-22....
Click to expand...
Click to collapse
screw the toshiba stack! just dont install that junk, Vista will automally install Microsoft bluetooth stack!
Can someone please detail the steps on how to get Internet Sharing via bluetooth for either XP or vista?
TIA!
Interestingly, there's a help topic in WM6 that explains this! Tap Start->help and then choose "search"
Now search for "Internet sharing". How to set up the m$ bt stack on your desktop is explained there.
M$ stack
I just have the same prob. on my laptop with XP SP2 and toshiba BT stack...
how can i fix the drivers for M$ BT stack without install VISTA ???
THX in advance
vdavide
Since upgrading to WM6 Black, I can't seem to get the Wireless Modem (internet sharing) to work. I am using a USB cable but when I start the DUN on the PC, it says there is no modem installed.
found the answer elsewhere - if you are using USB turn off BT on the device!
obvious really (?)
replacing Toshiba BT stack with Microsoft
Hey, I cant vouch for this since i dont have a toshiba but thought i might pass this on. hope it helps.
http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlViewDL.jsp?soid=841048
Is there any way to use old wmodem from WM5 on WM6. I have public ip and im afraid that using Internet Sharing make that i will be behind nat? If i think correctly? /dont have wm6 on hermes/
warmkiwi99 said:
Since upgrading to WM6 Black, I can't seem to get the Wireless Modem (internet sharing) to work. I am using a USB cable but when I start the DUN on the PC, it says there is no modem installed.
Click to expand...
Click to collapse
Hey bud, Microsoft ditched DUN in WM6. If you have the drivers installed properly (included with Activesync 4.5) you should see a new LAN connection in your Network Connections. In Windows XP it should be described as "Windows Mobile-based Internet Sharing Device" If you don't have the driver installed you will see Generic RNDIS in your Device Manager. From what i understand if you have Vista installed on your computer these drivers come stock (on the Final full version of Vista, not included by default on RC1, not sure about RC2)
hope this helps...
PAN with toshiba stack
I downloaded an updated bluetooth stack from
http://aps.toshiba-tro.de/bluetooth/pages/download.php
and it worked fine.
Pair hermes with computer. First turn on internetsharing then connect using pan profile.
TheLuggs said:
I downloaded an updated bluetooth stack from
http://aps.toshiba-tro.de/bluetooth/pages/download.php
and it worked fine.
Pair hermes with computer. First turn on internetsharing then connect using pan profile.
Click to expand...
Click to collapse
... mmm interesting ... wich version of toshiba stack you used ? and wich version of WM6 on your device ?
I tried the very latest version of toshiba stack with LVSW first WM6 version but doesn't work .... only the M$ stack work ( fine too ).
Bye
vdavide
vdavide said:
... mmm interesting ... wich version of toshiba stack you used ? and wich version of WM6 on your device ?
I tried the very latest version of toshiba stack with LVSW first WM6 version but doesn't work .... only the M$ stack work ( fine too ).
Bye
vdavide
Click to expand...
Click to collapse
Bluetooth stack:
v5.10.06
bluetooth spec:
2.0,1.2,1.1
with jasjamming's WM6 Black 2.0
works like a charm, couldn't get it to work wit the older toshiba stack supplied by asus (3.03.04)
TheLuggs said:
Bluetooth stack:
v5.10.06
bluetooth spec:
2.0,1.2,1.1
with jasjamming's WM6 Black 2.0
works like a charm, couldn't get it to work wit the older toshiba stack supplied by asus (3.03.04)
Click to expand...
Click to collapse
i tried the v 5.10.06 too on my asus but still can't connect to my tytn WM6 LVSW first release .... maybe the different WM6 is the key of this problem...
wich options u use in the toshiba stack ( security level and so on ) ?
i tried high security level that force pairing with device ( and obviously pan enabled) but still get the message " only file tranfer service on the device ..."
i'm interested to get it to work too also if it's working now with m$ stack .
There may be some other users interested too...
THX
vdavide

Windows Blue Screen caused by bluetooth

Hi,
I don't know if anybody has encountered such problem yet (couln't find it in forum).
I am currently using JasJamming WM6 Black 3.0.1 ROM (which I must say is quite good!) and have this problem with Windows XP.
When I try to make Internet Sharing via bluetooth, imediatelly when I press Connect button on PC to connect to Bluetooth PAN, Windows PC crashes and I get windows blue screen...
I am using standard Windows Bluetooth stack and apps.
I have used before standard WM5 ROM 1.35 and didn't have any problems with old Wireless modem application and bluetooth ...
I got the blue screen while using bluetooth too. I'm using BlueSoleil on the Desktop and stand MS bluetooth stack on WM6 Black Majik. Also tried the broadcom bluetooth stack on WM6 Black Majik and still getting the blue screen.
It happened at various stages. can't remember exactly what i did. I got pissed off and not using bluetooth anymore.

Can't receive files through bluetooth

Guys,
I can't seem to figure out whats wrong with my bluetooth. I'm using the official Dopod WM6 ROM and I'm trying to receive a file through bluetooth using other mobile phones and my laptop but can't receive files to my Dopod838Pro.
Whenever I send files to other mobile phones, they receive it. we can pair our devices and can be discovered as well. The problem is WM6 can't receive any of the files they are sending. Anyone knows the problem? Any fix?
Is the problem with the M$ Bluetooth stack?
Is it possible to replace it with the widcomm stack?
try this
I don't have any problem with file sharing via BT. Try to install BT explorer. Cab below.
avalon829 said:
Guys,
I can't seem to figure out whats wrong with my bluetooth. I'm using the official Dopod WM6 ROM and I'm trying to receive a file through bluetooth using other mobile phones and my laptop but can't receive files to my Dopod838Pro.
Whenever I send files to other mobile phones, they receive it. we can pair our devices and can be discovered as well. The problem is WM6 can't receive any of the files they are sending. Anyone knows the problem? Any fix?
Is the problem with the M$ Bluetooth stack?
Is it possible to replace it with the widcomm stack?
Click to expand...
Click to collapse
you just need to go into settings > connections > Beam and check recieve incoming beams

Categories

Resources