Related
http://www.clubimate.com/index.asp?PageAction=DEVICE_PDA2K_BT
Lets see how it goes! Under my BT module versions everything is now 1.0.0.3500 except BTPluginManagerCE.exe which is 1.0.0.1
Can someone post it on the forum
I don't have an club i-mate account. Can you PM me the patch?
Can a PDA2k owner with access to Club iMate PLEASE post the patch here, so that everyone with a Blue Angel device can benefit?
Thanks!!!
Jabra BT 250 with stack v 3500
Did anyone try his headset with the new Bt stack ( .3500 )? I want to buy a Jabra Bt 250 but I had a very bad experience with the old BT software. Can someone verify me that it works without problems now?
BT Stack 3500
I don't have an club i-mate account. Can you PM me the patch?
Thakns!!!
Any O2 XDA2s owner tried the patch out yet?
Regards,
RajeshR
BTW, the patch has been posted by someone else at:
http://www.blueridge.net/dereck/bt/
RajeshR
Bluetooth
Excellent-solved everything !!
If anyone has the guts to try this on the Sprint device, please post. Unfortunately my balls aren't big enough at this point.
some guy in another forum 'claimed' it hosed his sprints bt, and he had to restore.
i tried it on my qtek 2020 but it also freezed it & i had to restore, i extracted the files & tried them 1 by 1 untill found that wavedev.dll cuases the freeze if this file is removed it installs it but still can't get it working, any thoughts guys?
I insatlled it on my PDA2k. Now, it works fine with my O2 clip bluetooth headset. I am quite happy for the fix beacuse I can use my BT headset at last.
Guest,
Have you heard the phrase "use it or loss it"? We'll if your never f**king around your balls will never grow, they'll just shrivel up and fall off completely. So go get your self some action!
Later,
Your guinea pig reports - installing this on a O2 XDA IIs. Here are the steps I went thru.
- Put the cab file on to my SD card.
- I soft reset the unit before went on.
- Once it's restarted. I execute the file under file manager.
- Files install rather quickly. Today screen looked a bit mess up.
- Soft reset again - everything looks normal again.
Overall - Bluetooth suprisingly seems response and start up much quicker than before. Bluetooth version went from 1.0.0.1900 to 1.0.0.3500.
First test - wake up by itself - I turned off the unit with bluetooth on (headset enabled). I waited 15 mins and it no longer turning on itself.
Second test - Out of Memory error message - I started up 7 programs in the background before turning on bluetooth. No more out of memory message!
Third and final test (to be done) - Bluetooth and WIFI together.
Cheers
Mine doesn't install after I copy to my SD Memory. Anyone can advise/help.
Thanks a Million
Btw, do you mean using file explorer to execute files & which file to execute?
yatlee said:
Your guinea pig reports - installing this on a O2 XDA IIs. Here are the steps I went thru.
- Put the cab file on to my SD card.
- I soft reset the unit before went on.
- Once it's restarted. I execute the file under file manager.
- Files install rather quickly. Today screen looked a bit mess up.
- Soft reset again - everything looks normal again.
Overall - Bluetooth suprisingly seems response and start up much quicker than before. Bluetooth version went from 1.0.0.1900 to 1.0.0.3500.
First test - wake up by itself - I turned off the unit with bluetooth on (headset enabled). I waited 15 mins and it no longer turning on itself.
Second test - Out of Memory error message - I started up 7 programs in the background before turning on bluetooth. No more out of memory message!
Third and final test (to be done) - Bluetooth and WIFI together.
Cheers
Click to expand...
Click to collapse
peterpeh said:
Mine doesn't install after I copy to my SD Memory. Anyone can advise/help.
Thanks a Million
Btw, do you mean using file explorer to execute files & which file to execute?
Click to expand...
Click to collapse
Copy the .cab file to your SD card; use File Explorer to find it on your SD card and click on it. It should start executing and will install the patch for you.
Regards,
Rajesh
you can also install in my docs, double click on it from the XDA screen and it will install. After install it will delete the cab file from 'my docs'
Dear all,
Is the patch compatible with XDA II running WM2003SE?
Thanks
Ken_xda said:
Dear all,
Is the patch compatible with XDA II running WM2003SE?
Thanks
Click to expand...
Click to collapse
nope my above was on 2003 SE
Bluetooth
I installed this on an Orange M2000, no probs with the install and now my SonyEricsson BT car kit works fine. No Bluetooth memory errors yet!
Really impressed so far (fingers crossed).
Hopefully Orange and O2 will release it formally ASAP.
i've been using my xda IIs for 2 months now but I seem to not get the bluetooth sending capability correctly.
My problem is this, I can not send a file via bluetooth. For example, I want to send a MP3 to another bluetooth enabled Phone. When I Tap the file and select "beam file", it does not send via bluetooth but instead only via Infrared.
I am doing it right or should I follow another way of sending files via bluetooth. I could receive files though, it's just the sending that's I'm not able to do correctly.
How should I send it?
thanks for the help
--------------------
O2 XDA IIs
Yes, I face this problem too and know others who have this problem in this device. I hear BT build 3900 takes care of this problem. I have build 3500 and waiting for the next Imate ROM upgrade that will take it to 3900. Till then, I make do with Resco File Explore.
Yes, I face this problem too and know others who have this problem in this device. I hear BT build 3900 takes care of this problem. I have build 3500 and waiting for the next Imate ROM upgrade that will take it to 3900. Till then, I make do with Resco File Explore.
asar, what does Resco File explorer do? how is it similar to the bluetooth software that's built-in on the device?
cheers!
I have had an XDA2 for sometime. I have just purchased a XDA2s but can not get it to beam a file, like on the xda2. I go to file explorer, hold down on the file I want to send and hit beam file. The page says searching but does not ever find any devices!!
I have upgraded the Radio ROM upgrade to version 1.12.00 and the Bluetooth upgrade to version 1.0.0.3900, but I still have the same problem. Is anyone else with an XDA2s able to beam files like with the xda2, or have any ideas why it is not working?
Thanks
hey same here too
hi
i too have the same problem and i dont even know on which windows m i Running my PDA ??
Can some one help me how to find which windows have been installed on my XDA IIs
if you have installed the 3900bluetooth stack, then you must forget about the beam option, when u tap and hold within file explorer, tap send by bluetooth instead of beam file, this will work as i had same problem, and i was told this by members here.
hope this helps.......
my way of beaming files via bluetooth is to open the bluetooth manager and select "new" then click on "browse files on a remote device". After that, bluetooth devices will be discovered by your BA. Once the devices are already listed, you could select to which device you want files to send to...
hope this helps...
cheers!
Guys, you're talking about two different things here. When you choose 'beam file' that means trying to send it to another device using the infrared port, not Bluetooth.
It says it can't find other devices because on your receiving device you've probably turned Bluetooth on, but not IR. And even if you had, you're supposed to align the IR ports and keep the two devices pretty close to each other. On your BlueAngel, the IR port is on the left side so you have to turn it.
You should either choose 'send via Bluetooth' if you want to send something via Bluetooth, or choose 'beam file' if you want to beam it via IR. Check if your receiving device has Bluetooth or IR capabilities and has these switched on; if you're using IR, point the device's IR ports to each other.
Your Windows version:
Start -> Settings -> System -> About.
Thanks
Thanks all of you
I just Cant belive that i couls see a reply posted so so soon
A million Thanks
and ill do keep a check on the forum
bluetooth not in my menu
Hey jojo
i have not got send via bluetooth on my menu in the FE
also i dont know the bluetooth stack ???
how do i get that now
no bluetooth sending on SPV M2000/XDAiis...
Robrecht: they are not talking about two different things, to beam a file it "should" pick up all incoming beams including bluetooth, if you try beam a file a menu will come saying two things:
1) infrared - align ports
2) searching...
Now the "searching" means its looking for bluetooth devices, provided you have activated "recieve all incoming beams" in beam settings...
Unfortunately although i know how it all works, i also have the same problem with my SPV M2000, i also cant send via bluetooth,i had the XDAii and that worked totally fine, the only way to do it on the M2000 is through exploring another bluetooth device, but not all devices allow for that...its such an easy operation that has become so difficult, i mean if thats how they have programmed it, it sucks ass, even old crappy phones with bluetooth can send files easier...
i think it is a problem and if there is any solution can someone let us know...
regards...
Re: bluetooth not in my menu
spread_smiles said:
Hey jojo
i have not got send via bluetooth on my menu in the FE
also i dont know the bluetooth stack ???
how do i get that now
Click to expand...
Click to collapse
go to bluetooth in the settings/connections. then in bluetooth, and tap 'about'
this will prob show 3500version, it needs to be 3900.
you vcan get this i think from this sites ftp, but i cant remember how to access that, but i got mine off google, dunno what site, but google is ur friend, search for bluetooth upgrade 3900* u will find it.
or even better, look here,
http://forum.xda-developers.com/viewtopic.php?t=18215
BT3900.....?????
I've heard alot of good and bad remarks about bt3900 series.... Im running an SPV M2000 on windows 2003 second edition, will upgrading my bt3500 to bt3900 solve my sending via bluetooth option(or beam file option)?????
I GOT IT BUT ...
thanks JOJO
but when i clicked the link i got to download 2 BT stack but when i unzip it it just would not come in one file but split in to 10s and than i am confussed how do i get it all to one ???
how did you upgrade it to 3900
i dont get any cab file
is there any particular software to unzip this file !!
Re: I GOT IT BUT ...
spread_smiles said:
thanks JOJO
but when i clicked the link i got to download 2 BT stack but when i unzip it it just would not come in one file but split in to 10s and than i am confussed how do i get it all to one ???
how did you upgrade it to 3900
i dont get any cab file
is there any particular software to unzip this file !!
Click to expand...
Click to collapse
you dont need to unzip a cab file, a cab file is the same as a .exe file on your desktop pc,
just copy the cab file accress to a location on your pda, somewhere you know where it is.... lets say you copy over using active sync, into your documents..... when you go into file explorer on your pda, just tap the cab file and it will install ........ and hey presto..... your on bt build 3900
tradivise, upgrading to 3900, should sort your problem out.... sending files from devices to another handset by Ir is something that needs avioding, as i find that even if the pda can detect the device, it aint compatable and will always fail..... i even found this on my old XDA 2
instead on tapping on beam file on 3500 like with the xda2, upgrade to 3900 and you dont need the beam option.... just hold on file and tap send via bluetooth., anything is now sendable but if you want this to help with Ir within the beam option, this wont help as it is for bluetooth.....
happy installing if you choose to....... id recommend it tho!!
it does solve the problem!
joey jojo... thanks, yeh i installed it and it solves the problem, i now have the "send via bluetooth" option in the menu when holding down on a file i want to send, you can almost send anything....there is one thing thats seems a bit odd!!! - when using my bluetooth headset it sometimes crackles a bit even though im within a metre or two of the phone, i dunno, that doesnt seem normal...but i guess for the amount of times i use my headset compared to the amount of times i "wanted" to send files via bluetooth, i suppose i can live with the crackling...
thanks JJ
So i also recomend to anyone having the same problems as me upgrading to bt3900, i mean im not sure about the crackling, i read on another post somewhere that there are a few others with the same crackling problem, but as far as sending the via bluetooth, it solves the problem...
this is good news!
joey jojo, could I ask for one too?
cheers!
bt3900...
you can get bt3900 from this site - http://wiki.xda-developers.com/index.php?pagename=BA_Bluetooth_1.0.0.3900_Upgrade
It gives you instructions and everything else...
happy installing...
thanks tradivise! one question though, would it be just fine if I wouldn't upgrade may radio rom and just install the bluetooth upgrade, would just do the trick the same?
cheers!
yeh it all workd fine for me and i didnt upgrade my radio...im running radio 1.06.02...
guys, thanks! just installed BT3900 and my BT works better now.
Hey man, thats cool, im glad you got it sorted out...
HAPPY BLUETOOTHING!!!!!!!!
Hello everybody,
I have the following problem with my o2 XDA III and I'm wondering if there is anyone out who has the same:
I want to use a Nokia N90 (which supports 3G) as a modem for my XDA III, and I want them connected via Bluetooth. I know it offers the dial-up networking service (DUN) so that my XDA III could connect to it. But the only service my XDA III retrieves is the "OBEX File Transfer...".
Then I tried another mobile, the Nokia 6630, which I borrowed from a friend. But again, the XDA III only retrieves the OBEX.
Finally I shuffled my cupboard and got my old Siemens S55. Now, the XDA III detected both the OBEX service and the Serial Port service.
Even an update (BT 3500 --> BT 3900) could not solve that problem.
I know the Nokias support DUN, and that's why I think the mistake lies in the XDA III.
I'd be very pleased to hear from you!
cbruehl, who liked (until now) his XDA III very much.
Hi,
Yeah, the bluetooth seems to be cripled to stop you connecting via another mobile phone and make you use the operator it's got a sim card for.
I would love to do this to - my blue angel is now my 2nd phone/pda/satnav and gprs is expensive - if I want to use cheaper gprs in it i've got to swap the sim card with my main phone :-(
I've looked about quite a bit but can't find any kind of info or workaround.
Ian
There IS a solution for this....
I downloaded the BroadcomCorp_BT1.6.0.600.cab from the XDA FTP server and followed this link: http://forum.xda-developers.com/viewtopic.php?t=18052&highlight=btwizardprofiles
to the modified btwizardprofiles.dll. I modified the CAB file so that this (older!) version is installed (it's 1.4.1.60) and that works fine. I did manage to find another 1.6.0.600 bluetooth stack, but that .dll bombed out on me :roll: and I could not get the stack to install. Hope that helps.
How to use Quickly Reply?
Hi, all!
I'm a new member. Could someone help me?
Has any one been successful in transferring their Phone book via bluetooth to the car's phone book? If so, can you please let me know how?
I have an Acura TL 2008 and it has this option but I cannot seem to transfer even one single contact via bluetooth to the car let alone a whole phone book. I can pair perfectly and make and receive phone calls.
I am using Vp3G's WM6 3.0 version and I have Tmobile USA with unlimited internet. For radio, I am using the latest 1.51.
Is it the limitation of the Hermes or limitation of the Bluetooth in the Hermes?
Thanks.
Shamim
It's definitely not a limitation of the Hermes... I can upload my contacts to car set via Bluetooth. I don't have an Acura though... sorry.
stpete111 said:
It's definitely not a limitation of the Hermes... I can upload my contacts to car set via Bluetooth. I don't have an Acura though... sorry.
Click to expand...
Click to collapse
If you right click a contact, do you get the option to send via bluetooth? I do not and am wondering if something needs to be set or turned on.
Thanks.
Use the Jeyo bluetooth software. It will most likely transfer all your stuff to your car with no problems.
http://www.jetwaremobile.com/
It will do SMS messages too. You can even set it to use a different MAPI store such as email. Although there is a character limit that makes it kind of useless.
I have an Audi with MMI and it transfers fine, there is a short delay though after starting it up till the phonebook is available
Bluetooth & Infiniti
I wonder if anyone has had any experience with this utility and a 2007 Infiniti G35x that has the nav / tech package. I can pair my HTC TyTN just fine and use the basic bluetooth functions. I can even send one contact entry at a time but haven't figured out how to send my entire phonebook. I wonder if this app will help.
Anyone have any experience with this phone / car combo?
Thanks everyone for the jetware info. I will give it a shot and reply.
Shamim
I bet it is a setting issue for the Acura. The Ford Sync system will ask, "Do you want to load phonebook?" right after it pairs...
It works - JETware Mobile Software
Upon suggestion from 'Diaftia' in this thread (THANK YOU!) I downloaded Hands-free Extension from JETware and installed it on my HTC TyTN. I then sat in my car and through the phonebook 'send' mode of the applet, I chose to send all 354 contact records to my car's phonebook via the bluetooth pairing. The car immediate showed 'downloading' at the appropriate time and viola! They were there.
I need to play with it some more to see if I can get more than the first phone number field to download. The Hands-free Extension app does allow you to pick only certain categorized phone records to be sent.
I've since purchased the utility and will explore more of its features! So far, so great! I've been looking for this solution for quite sometime!
Regards,
David
SteinyD said:
Upon suggestion from 'Diaftia' in this thread (THANK YOU!) I downloaded Hands-free Extension from JETware and installed it on my HTC TyTN. I then sat in my car and through the phonebook 'send' mode of the applet, I chose to send all 354 contact records to my car's phonebook via the bluetooth pairing. The car immediate showed 'downloading' at the appropriate time and viola! They were there.
I need to play with it some more to see if I can get more than the first phone number field to download. The Hands-free Extension app does allow you to pick only certain categorized phone records to be sent.
I've since purchased the utility and will explore more of its features! So far, so great! I've been looking for this solution for quite sometime!
Regards,
David
Click to expand...
Click to collapse
David,
I installed the software but did not see a Send option. I was able to select the categories on contacts that I wanted for the phonebook.
Where was the Send option? In the Jetware software or your car?
Thanks.
shamim
In the Extension software from the menu, go to phonebook options. In phonebook options select the categories that you wish to send to the phone. Press the 'menu' soft key option again. You will see 5 options, of which 'send contacts' is one of them. You will then get another set of options and finally a confirmation before it sends the records. Make sure your car or receiving device is set to receive before you finalize the send process.
SKassam said:
David,
I installed the software but did not see a Send option. I was able to select the categories on contacts that I wanted for the phonebook.
Where was the Send option? In the Jetware software or your car?
Thanks.
shamim
Click to expand...
Click to collapse
Same Problem with Pioneer
SteinyD said:
I wonder if anyone has had any experience with this utility and a 2007 Infiniti G35x that has the nav / tech package. I can pair my HTC TyTN just fine and use the basic bluetooth functions. I can even send one contact entry at a time but haven't figured out how to send my entire phonebook. I wonder if this app will help.
Anyone have any experience with this phone / car combo?
Click to expand...
Click to collapse
Well, I have experienced exactly the same problem with my Pioneer, I am able to send one by one contact to the car but I am not able to send the entire phonebook at once. When I try to do that then the bluetooth connection is getting disconnected and that is it. I wonder if that is a problem with the bluetooth driver,
I had a heck of a problem with importing to my new Audi A4 Pervertable, and worse it kept loosing connectivity then re-establisign it (mid song no less). Eventually fixed with BT Radio 1.50, (tried everything before it).
I don't know whether this is relevant or not. This is how I do it.
I have a Garmin Nuvi 610. When pairing the device with my Hermes all I have to do is make sure comm port service is enabled in the hermes bluetooth utility when asked for service type. If it's not enabled then there won't be any sharing of phonebook between them.
SKassam said:
Has any one been successful in transferring their Phone book via bluetooth to the car's phone book? If so, can you please let me know how?
I have an Acura TL 2008 and it has this option but I cannot seem to transfer even one single contact via bluetooth to the car let alone a whole phone book. I can pair perfectly and make and receive phone calls.
I am using Vp3G's WM6 3.0 version and I have Tmobile USA with unlimited internet. For radio, I am using the latest 1.51.
Is it the limitation of the Hermes or limitation of the Bluetooth in the Hermes?
Thanks.
Shamim
Click to expand...
Click to collapse
I currently use the JetWare Mobile extension ver 1.31 that I updated several days ago and now I can use Voice Command via bluetooth hear and give commands through the car stereo system.
I can also hear announcements of calls, emails via the stereo system. Sorry got off subject...
With this software I'm pretty sure that you will be able to upload your address book. I had no problem with 275+ contacts....
They have a free trial you could try to ensure that it works for you, but it's not free...
If memory serves me think it was about $15, well worth it if your a heavy BT user.
Here is the site: www.jetwaremobile.com
jac said:
I currently use the JetWare Mobile extension ver 1.31 that I updated several days ago and now I can use Voice Command via bluetooth hear and give commands through the car stereo system.
I can also hear announcements of calls, emails via the stereo system. Sorry got off subject...
With this software I'm pretty sure that you will be able to upload your address book. I had no problem with 275+ contacts....
They have a free trial you could try to ensure that it works for you, but it's not free...
If memory serves me think it was about $15, well worth it if your a heavy BT user.
Here is the site: www.jetwaremobile.com
Click to expand...
Click to collapse
Jac,
Thanks for the info. I already gave jetware a shot but it did not work for me. I do not get the "Send" option on my contacts or phonebook through Jetware or Outlook contacts on the TyTN. I am using Radio 1.51 and Jetware extension 1.31. If I got the Send option, it would work. For Voice command 1.6, do you use the option 'use bluetooth when available" or the option "use bluetooth only".
Thanks for being helpful.
Shamim
SKassam said:
Has any one been successful in transferring their Phone book via bluetooth to the car's phone book? If so, can you please let me know how?
I have an Acura TL 2008 and it has this option but I cannot seem to transfer even one single contact via bluetooth to the car let alone a whole phone book. I can pair perfectly and make and receive phone calls.
I am using Vp3G's WM6 3.0 version and I have Tmobile USA with unlimited internet. For radio, I am using the latest 1.51.
Is it the limitation of the Hermes or limitation of the Bluetooth in the Hermes?
Thanks.
Shamim
Click to expand...
Click to collapse
I have never had any problems with the phonebook transfers on Audi A4 (06) with any of the WM6 ROMS....even my ol' BlackJack now works with the WM6 ROM
SKassam said:
Jac,
Thanks for the info. I already gave jetware a shot but it did not work for me. I do not get the "Send" option on my contacts or phonebook through Jetware or Outlook contacts on the TyTN. I am using Radio 1.51 and Jetware extension 1.31. If I got the Send option, it would work. For Voice command 1.6, do you use the option 'use bluetooth when available" or the option "use bluetooth only".
Thanks for being helpful.
Shamim
Click to expand...
Click to collapse
Sorry to hear it didn't work for you...
I know in my case, it took me a couple times to figure out how to upload the the contacts to the car stereo using Jetware...
First time was: I did not go into... Hand-free Setting\Menu\Advanced Options\ And check off Phonebooks.
Second time was: I did not leave the car stereo phonebook settings "waiting to accept data" before I sent all the contacts from my PDA.
Any way back to your last question "About VoiceCommand 1.6" I use the setting "Announce notifications using Bluetooth hands free only"....
Thanks,
Good luck on your quest...