Newbie few questions M1000 - Upgrading, Modifying and Unlocking

Hi,
after a quick search im struggling to find info.....
Please bear with me...
1) does anyone have a link to a GPRS counter that will work with my phone??? i fownloaded and paid for 1 that doesnt work..... (all locations GPRS counter) as its says it is not a windows CE app....
2) Is there a rom update for the M1000 that will allow voice dialling like the 02 rom update??? or what would the implications of using the 02 rom update be?
3) i saw a link a while back regarding the flashing bluetooth light, is there anyway of turning it off?
Many thanks for being patient with me.....

GPRS Counter
Try using spb GPRS Monitor (www.spbsoftwarehouse.com) You can use for 15 days on demo. This was the program that was supplied with the original xda. Works perfactly on my XDA II.
Hope this helps.

1. many programs you download are exe for the pc which then use activesync to copy the files to the pda
make sure that you are not trying to run pc exe files on your xda otherwise it will give you that error
3
hhhmmm there should be an icon in the left corner where you can turn off bluetooth that makes the light stop blinking
of cause it also disable bluetooth but if you need bluetooth and worry about the power it takes to make the led blink then dont it dont use much power, having bluetooth on does however

Related

XDA2s Will not beam files by bluetooth!!!

I have had an XDA2 for sometime. I have just purchased a XDA2s but can not get it to beam a file, like on the xda2. I go to file explorer, hold down on the file I want to send and hit beam file. The page says searching but does not ever find any devices!!
I have upgraded the Radio ROM upgrade to version 1.12.00 and the Bluetooth upgrade to version 1.0.0.3900, but I still have the same problem. Is anyone else with an XDA2s able to beam files like with the xda2, or have any ideas why it is not working?
Thanks
hey same here too
hi
i too have the same problem and i dont even know on which windows m i Running my PDA ??
Can some one help me how to find which windows have been installed on my XDA IIs
if you have installed the 3900bluetooth stack, then you must forget about the beam option, when u tap and hold within file explorer, tap send by bluetooth instead of beam file, this will work as i had same problem, and i was told this by members here.
hope this helps.......
my way of beaming files via bluetooth is to open the bluetooth manager and select "new" then click on "browse files on a remote device". After that, bluetooth devices will be discovered by your BA. Once the devices are already listed, you could select to which device you want files to send to...
hope this helps...
cheers!
Guys, you're talking about two different things here. When you choose 'beam file' that means trying to send it to another device using the infrared port, not Bluetooth.
It says it can't find other devices because on your receiving device you've probably turned Bluetooth on, but not IR. And even if you had, you're supposed to align the IR ports and keep the two devices pretty close to each other. On your BlueAngel, the IR port is on the left side so you have to turn it.
You should either choose 'send via Bluetooth' if you want to send something via Bluetooth, or choose 'beam file' if you want to beam it via IR. Check if your receiving device has Bluetooth or IR capabilities and has these switched on; if you're using IR, point the device's IR ports to each other.
Your Windows version:
Start -> Settings -> System -> About.
Thanks
Thanks all of you
I just Cant belive that i couls see a reply posted so so soon
A million Thanks
and ill do keep a check on the forum
bluetooth not in my menu
Hey jojo
i have not got send via bluetooth on my menu in the FE
also i dont know the bluetooth stack ???
how do i get that now
no bluetooth sending on SPV M2000/XDAiis...
Robrecht: they are not talking about two different things, to beam a file it "should" pick up all incoming beams including bluetooth, if you try beam a file a menu will come saying two things:
1) infrared - align ports
2) searching...
Now the "searching" means its looking for bluetooth devices, provided you have activated "recieve all incoming beams" in beam settings...
Unfortunately although i know how it all works, i also have the same problem with my SPV M2000, i also cant send via bluetooth,i had the XDAii and that worked totally fine, the only way to do it on the M2000 is through exploring another bluetooth device, but not all devices allow for that...its such an easy operation that has become so difficult, i mean if thats how they have programmed it, it sucks ass, even old crappy phones with bluetooth can send files easier...
i think it is a problem and if there is any solution can someone let us know...
regards...
Re: bluetooth not in my menu
spread_smiles said:
Hey jojo
i have not got send via bluetooth on my menu in the FE
also i dont know the bluetooth stack ???
how do i get that now
Click to expand...
Click to collapse
go to bluetooth in the settings/connections. then in bluetooth, and tap 'about'
this will prob show 3500version, it needs to be 3900.
you vcan get this i think from this sites ftp, but i cant remember how to access that, but i got mine off google, dunno what site, but google is ur friend, search for bluetooth upgrade 3900* u will find it.
or even better, look here,
http://forum.xda-developers.com/viewtopic.php?t=18215
BT3900.....?????
I've heard alot of good and bad remarks about bt3900 series.... Im running an SPV M2000 on windows 2003 second edition, will upgrading my bt3500 to bt3900 solve my sending via bluetooth option(or beam file option)?????
I GOT IT BUT ...
thanks JOJO
but when i clicked the link i got to download 2 BT stack but when i unzip it it just would not come in one file but split in to 10s and than i am confussed how do i get it all to one ???
how did you upgrade it to 3900
i dont get any cab file
is there any particular software to unzip this file !!
Re: I GOT IT BUT ...
spread_smiles said:
thanks JOJO
but when i clicked the link i got to download 2 BT stack but when i unzip it it just would not come in one file but split in to 10s and than i am confussed how do i get it all to one ???
how did you upgrade it to 3900
i dont get any cab file
is there any particular software to unzip this file !!
Click to expand...
Click to collapse
you dont need to unzip a cab file, a cab file is the same as a .exe file on your desktop pc,
just copy the cab file accress to a location on your pda, somewhere you know where it is.... lets say you copy over using active sync, into your documents..... when you go into file explorer on your pda, just tap the cab file and it will install ........ and hey presto..... your on bt build 3900
tradivise, upgrading to 3900, should sort your problem out.... sending files from devices to another handset by Ir is something that needs avioding, as i find that even if the pda can detect the device, it aint compatable and will always fail..... i even found this on my old XDA 2
instead on tapping on beam file on 3500 like with the xda2, upgrade to 3900 and you dont need the beam option.... just hold on file and tap send via bluetooth., anything is now sendable but if you want this to help with Ir within the beam option, this wont help as it is for bluetooth.....
happy installing if you choose to....... id recommend it tho!!
it does solve the problem!
joey jojo... thanks, yeh i installed it and it solves the problem, i now have the "send via bluetooth" option in the menu when holding down on a file i want to send, you can almost send anything....there is one thing thats seems a bit odd!!! - when using my bluetooth headset it sometimes crackles a bit even though im within a metre or two of the phone, i dunno, that doesnt seem normal...but i guess for the amount of times i use my headset compared to the amount of times i "wanted" to send files via bluetooth, i suppose i can live with the crackling...
thanks JJ
So i also recomend to anyone having the same problems as me upgrading to bt3900, i mean im not sure about the crackling, i read on another post somewhere that there are a few others with the same crackling problem, but as far as sending the via bluetooth, it solves the problem...
this is good news!
joey jojo, could I ask for one too?
cheers!
bt3900...
you can get bt3900 from this site - http://wiki.xda-developers.com/index.php?pagename=BA_Bluetooth_1.0.0.3900_Upgrade
It gives you instructions and everything else...
happy installing...
thanks tradivise! one question though, would it be just fine if I wouldn't upgrade may radio rom and just install the bluetooth upgrade, would just do the trick the same?
cheers!
yeh it all workd fine for me and i didnt upgrade my radio...im running radio 1.06.02...
guys, thanks! just installed BT3900 and my BT works better now.
Hey man, thats cool, im glad you got it sorted out...
HAPPY BLUETOOTHING!!!!!!!!

MDA Compact III - GPS setting..

Hello all
I have just purchased the MDA Compact III and will now load up some Tomtom 6 maps via the MicroSD card (which is being delivered as yet)..
My question is, before when starting tomtom (on other devices), it used to ask me if i wanted to switch on the bluetooth so that it could detect device (receiver)..How would it work now wit the built in receiver?? Would it just detect automatically?
Also, i don't understand the quickgps icon. Do i have to use it or is it only for a faster connection to a satellite?
Sorry if these are dumb questions - but the manuals are rubbish!
Thanks in advance
GPS type is configurable manually in TomTom. In your case built-in GPS is pre-set, so no need to do anything. Just open TT and go...
Quickgps is an option to enable you to download the actual positions of satellites as an input for TT. This is not a must, but you may try to examine yourself whether it makes your gps-fix faster or not...
Thanks for the reponse..
Is the quick GPS chargeable? i.e is there a cost involved downloading?
Thanks
Only the Cost for the internet Service, since Quick GPS downloads Satelite Data from the Internet.
Startt Quick GPS then go to menu/ Options In here set it to remind you when the data expires, and Autodownload when connected to a PC via Active Sync, if you want to avoid GPRS charges make sure Autodownload when data expires is NOT checked.
Set-up as above if you dock your PDA each night to charge it and let Active Sync run the program will auto update, if you are mobile and the data runs out you get the warning and can select to download an update or simply ignore it.
If you have Web and Walk (T-Mobile) then the GPRS charges are not an issue - Mike
Hehe Thank you
Haven't tried that, i felt bugged by the constant message of Quick GPS, that my Data expired...Now that is soved
Hi,
I am new to this forum and have recletly purchased a T-Mobile MDA Compact III, My friend has installed the TOMTOM 6 software but for some reason i cant pick up a gps signal.
I have down loaded the "quick GPS" but still not joy.
i have gone to start and setting on on my MC3 and made sure that the com port is 4.
also made sure i have set the it to pick up the internal receiver i,e the built in GPS. not sure what i am doing wrong
please help, ant advise or can you point me in the right direction
Kind regards
Azhar03
MDC 3 WITH TOMTOM 6
azhar, you will get told off for posting the same question twice!! - please see your other post for my response which can be found http://forum.xda-developers.com/showthread.php?t=283663 - Mike

Bluetooth Explorer creates PROBLEMS for TomTom!!!

Indeed clicking as much as one time on "Bluetooth Explorer" will cause TomTom not to function properly any more (maps/voices not found etc.).
I have learnt that the hard way!!!
Many members of this forum speculated that the Artemis SD card housing is somehow related to TT's maps to vanish.... NOT TRUE!!!
After a hard reset I have tested that TT was fully functional and I have (intentionally... just to find out) clicked on Bluetooth Explorer and BINGO the TT6.1 maps&voices are GONE!!!
If some of the forum experts would happen to read this and would feel like giving instructions to disable Bluetooth Explorer it would be very helpful.... this will surely avoid SEVERAL hard resets to many people.
I have read that one should go to Settings/Connections then select the FTP tab and uncheck "Enable Bluetooth Explorer" but this is not to be found on my ARTEMIS (P3300)... Let's see if somebody will find a moment to share his/her wisdom with the rookies and shed some lights on this annoying problem.
Cheers!
SiperX
On my Orbit you do the following to disable the Bluetooth Explorer
Settings / Connections / Bluetooth / FTP (tab)
Then select or de-select Bluetooth Explorer.
I appreciate your kind reply Patrick but as you can read in my thread this path (Settings / Connections / Bluetooth / FTP (tab)) is not available in the Artemis/HTC P3300.... Anybody else?
Do you have a comms manager? If so you can access the ftp option of the bluetooth settings from here.
TomTom and Bluetooth explorer both work on my xda orbit.
herghost, what version of TomTom are you running?
I m unable to have Bluetooth Explorer enabled on my Orbit, and get TomTom to find the maps. I am running ver 6.02
perfect, i wasnt able to make tomtom recognize maps on orbit(on universal it works w/o probs) i switched bt expl. off and it works. thx
Guys, there is no doubt. TT (mine is version 6.1) and BT Explorer are NOT going to work together! I am glad to hear that phsnake could get his orbit to resume TT functions.... And (also) I found out that my old rom (the one originally shipped with the P3300) had the path (Settings / Connections / Bluetooth / FTP) to disable BT Explorer (as Patrick_UK explained) ... but the one I am using now does not offer the chance to enable/disable BTE.... any registry master would be kind enough to offer his/her expertise to make this possible? I am not so keen on editing the REG unless I know exactly what has to be done
rom 1.28.0.0 wwe
rom date 11-06-06
radio 02.69.90
protocol 4.1.13.30
ext. rom PDAMobiz.com
SiperX:I'll try today to find reg solution, i cannot promise anything, but i'll do reg export with btexpl. switched on, then with switched off and compare reg.files. hopefully i'll find the right one key.
Phsnake, this sounds like a great idea! Thanks in advance!!! I really hope that you can succeed and give me support in this matter.
By the way where did you find the rom (ROM: DOPOD IPL: 1.25.0001 SPL:1.27.0000 GSM: 2.69.90 OS:1.28.0.0 WWE) you are running now? It sounds lke the right one for my T-Mobile Artemis.
so i compared the regs and diff follows:
Code:
[HKEY_CURRENT_USER\Software\HTC\BluetoothFolder]
"EnableClient"=dword:00000001
"HDEVICE"=dword:00031380
[HKEY_LOCAL_MACHINE\Drivers\Active\68]
"ClientInfo"=dword:00000000
"Hnd"=dword:00031380
"Key"="Drivers\\BlockDevice\\BTDisk"
"Name"="BTD1:"
i guess all U need 2 do is change "EnableClient" from 1 to 0. try it and let us know. (i can disable it thru bt settings). or remove above posted reg entries.
ROM:its standard dopod shipped(the latest one) should be on wm-gurus.com
Thanks man! The registry editing you suggested worked and the BT Expl. is now OFF and TT finds the maps again!!!
But the option to enable/disable the BT Expl. (via BT settings as you say) is still not available any chance you could send me a screenshot of your reg for both [HKEY_CURRENT_USER\Software\HTC\BluetoothFolder] and [HKEY_LOCAL_MACHINE\Drivers\Active\68]?
For your Dopod rom, could you please give me a precise link where I can download it? I could not find it at wm-gurus.com.
Thanks a lot
ftp.wm-gurus.com/Artemis/Shipped_Complete_Updates/ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe
yes i know that wont allow u to switch off btexpl. thru bt control panel.
Here are regentries U requested, but i dont think it'll help. but try.
Thanks again!
BTW, the same file (ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe) was available at XDA too.... I have tested it a few weeks ago it and -being an AU (Australian rom) my sim (Dutch T-Mobile) did not get registered as the operator is apparently not quoted .... strange that you can use it in Scotland.
For regs I will see what I manage to put together and will let you know... Great (and prompt) support was very appreciated...
Hi again,
I have flashed once more the ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe onto my Artemis and I have (FINALLY) noticed that the SIM does register and I am able to use the phone (incoming & outgoing calls).
The only problem is that every time I reboot I get a notification from the "NETWORK WIZARD" which says "your current operator (20416) is not supported. You should obtain an update from your device vendor".... Any idea how I can get this nag off my back?
Thanks
try to check \windows\startup
I have deleted (& made a copy for backup) these 5 files:
netwiz.cpl
netwiz.dat
netwiz.exe
netwiz.exe.0404.mui
netwiz.ini
from the Windows folder of my Artemis.
After rebooting the Network Wizard notification does NO LONGER pops up!!!! So I would say "Problem solved", right?
I am glad that -thanks to the recent communications we exchanged- you "inspired" me to give one more try to the Dopod rom and I finally seem to have found what I wanted.
Only one final point: In other roms if you click on the phone signal bar you get the option to turn on/off the flight mode and if you click on the icon on the right of the phone signal bar you culd turn on/off the WiFi... in this rom you get a small (blue) Comm Manager link to follow in order to enable/disable these functions.... did you find any faster ways to activate WiFi or Flight mode? May be they can be added to the voice commands?
Cheers
u can use phonealarm-some skins supports one click wifi, gprs,btooth switch,
I saw phonealarm but I have decided to spend the end of the weekend configuring my newly installed rom (immediately after I will make a Sprite backup) and along the way try to think of something to keep to a minimum the amount of additional SW installed. What do you think if I use "tray launch", would that allow me to make the necessary shortcuts?
By the way (with previous roms) I kept my Artemis overclocked at 240 Mhz and it was pretty stable, did you test any higher frequency on the Dopod rom?

Can't connect with activesync anymore

Hi,
I've got a weird problem with my MDA compact III (T-mobile Netherlands, original ROM).
For some reason I don't know the active sync doesn't seem to identify the phone anymore.
I know there are a lot of problems with active sync and I've read and searched a lot of those threads but I can't solve my problem.
Active sync always ends up with the message that there is no phone connected whereas it is.
I tried different versions of active sync and different PC's (WIN XP SP2), deleted partnerships both on the phone as well as in active sync, I changed the name of the phone which it uses to identify on connection.
No matter what I tried, nothing could solve this.
The only way for me to exchange data at this moment is using wm5torage and using CAB's to install.
Please help!!
PS: A hard reset is not an option since I need to continue with the tools and files that are currently in the ROM.
Thanks in advance
mauce said:
Hi,
I've got a weird problem with my MDA compact III (T-mobile Netherlands, original ROM).
For some reason I don't know the active sync doesn't seem to identify the phone anymore.
I know there are a lot of problems with active sync and I've read and searched a lot of those threads but I can't solve my problem.
Active sync always ends up with the message that there is no phone connected whereas it is.
I tried different versions of active sync and different PC's (WIN XP SP2), deleted partnerships both on the phone as well as in active sync, I changed the name of the phone which it uses to identify on connection.
No matter what I tried, nothing could solve this.
The only way for me to exchange data at this moment is using wm5torage and using CAB's to install.
Please help!!
PS: A hard reset is not an option since I need to continue with the tools and files that are currently in the ROM.
Thanks in advance
Click to expand...
Click to collapse
Ok ... I have seen your problem many times and yes there are many other threads on it . But lets see since im woke if I canhelp you crack this little apple . 1st what you mean by you can't hard reset you need to continue wuith tools . 2nd when the phone is connected to your computer does it charge ? Do you see it connect in the device manager ? 3rd of you plug your phone to the charger does it charge as well.
Now if these question are yes then 1st I would say reboot your computer and soift reset phone ... If that doesnt solve the problem then we will goto next step.
I have a similar problem :
facts :
1. the usb cable charge the battery correctly.
2. The Headphones and mic are working well.
3. No data connection ( both activesync and WM5Storage )
4. Back from long journey using as navigator so the car holder and the car charger my have damaged the data pins ?
5. Reinstalled activesync on the PC , tried different PC, tried different Usb Cable, soft resetted an hard resetted the device but no success.
Please give me some suggestions before going to repairing service.
Thanks
maurizio.n said:
I have a similar problem :
facts :
1. the usb cable charge the battery correctly.
2. The Headphones and mic are working well.
3. No data connection ( both activesync and WM5Storage )
4. Back from long journey using as navigator so the car holder and the car charger my have damaged the data pins ?
5. Reinstalled activesync on the PC , tried different PC, tried different Usb Cable, soft resetted an hard resetted the device but no success.
Please give me some suggestions before going to repairing service.
Thanks
Click to expand...
Click to collapse
Sounds as if all is working . And what ever you were trying on the phone has an adverse effect ? What are these tools that are keepimng you from hard resetting ? I believe there is another program for connecting to this cell let me rack my brains while I think ...
PURESKILLZZZ said:
Ok ... I have seen your problem many times and yes there are many other threads on it . But lets see since im woke if I canhelp you crack this little apple . 1st what you mean by you can't hard reset you need to continue wuith tools . 2nd when the phone is connected to your computer does it charge ? Do you see it connect in the device manager ? 3rd of you plug your phone to the charger does it charge as well.
Now if these question are yes then 1st I would say reboot your computer and soift reset phone ... If that doesnt solve the problem then we will goto next step.
Click to expand...
Click to collapse
Hi PURESKILLZZZ,
Many thanks for taking you time to read my explanation.
Let me give you some answers:
1.) The reason for me is that in case of a hardreset I need to install all applications again. Actually I've been doing a hard reset and then afterwards restored a backup I created with spb backup. Unfortunately the problem was still there.
2.) Yes the phone charges when connected through USB (so it's not the connector that is faulty I guess).
The device manager I need to checkout didn't lok at that yet.
When I connect using wm5torage I can see the SD card in the explorer.
3.) The phone charges when connected to the charger.
So I guess the answer is yes to all your questions.
If you have more questions to be able to help me please let me know.
I'd like to tackle this problem.
Thanks in advance
I have a similar Problem:
facts:
1. Usb data cable charge the battery correctly
2. Headphones with mic are working well.
3. no activesync connection.
4. no wm5torage connection
5. tried different PC , different data cable ( the one than comes with PS3 ) , hard resetted the device but no success.
Any suggestions ?
Thanks in advance
I believe it is safe to say your present software is the issue and have you tried sktools for dong the back up .
maurizio.n said:
I have a similar Problem:
facts:
1. Usb data cable charge the battery correctly
2. Headphones with mic are working well.
3. no activesync connection.
4. no wm5torage connection
5. tried different PC , different data cable ( the one than comes with PS3 ) , hard resetted the device but no success.
Any suggestions ?
Thanks in advance
Click to expand...
Click to collapse
Well maybe if we find a solution to first guy yours may work as well...
PURESKILLZZZ said:
Well maybe if we find a solution to first guy yours may work as well...
Click to expand...
Click to collapse
i don't think so because i have no wm5torage connections so in my case i think is an hardware issue like data pins damaged ....
1 other thought ... A simple fix whichh may work . goto comm manager on your phone and click activeSync and see if that helps .
maurizio.n said:
i don't think so because i have no wm5torage connections so in my case i think is an hardware issue like data pins damaged ....
Click to expand...
Click to collapse
Did you jam the charger in the phone at anytime or did the phone drop while connected to charger . Just being connected for long periods of time dont hurt as I have ran my phone for over 24 hours connected to power while playing the radio thru the phone.
Unfortunately none of the suggestions worked for me.
It's not related to dropping the phone or taking hardware damage by faulty use or something.
This I know for sure since I own this phone only for a couple of weeks and didn't harm it in any way.
My conclusion also was that it must be software related, that's why I started this thread anyway.
Therefore I'm looking for suggestions/hints on the software side (most probably the problem would be on the phone and not on the PC, but what is it?........)
mauce said:
Unfortunately none of the suggestions worked for me.
It's not related to dropping the phone or taking hardware damage by faulty use or something.
This I know for sure since I own this phone only for a couple of weeks and didn't harm it in any way.
My conclusion also was that it must be software related, that's why I started this thread anyway.
Therefore I'm looking for suggestions/hints on the software side (most probably the problem would be on the phone and not on the PC, but what is it?........)
Click to expand...
Click to collapse
Ok .. Lets chase the possible software issues . What rom are you running and what have you installed ?
1 last note before I go take a power nap . You can check your activesync setting on the phone . goto => Start > Settings > Connections > USB to PC. Change the mode of the box next to Enable advance Network functionality. click ok .. Now try to connect ... The box is suppose to have a check in it but sometimes there are other reasons why it doesnt worj the defaukt way . I hope I have been of some assistance to you.
Similar issue
I had this same issue recently I thought it may be due to upgrading to activsync 4.5.
But it seemed not to make much difference when I attempted to work it on another pc using activsync.
The problem only occured after I had been using pocket mechanic to delete files and free up dead registry files.
I didn't want to do a hard reset straight away so instead I restored an older backup from before the issue started & since then the problem has been resolved.
So I guess the question is do you have an older backup than the one you have tried if so try it & see. Other than that a hard reset may well sort the issue?
Hope this helps, and serves as a warning to others don't delete certain reg keys even if a program (pocket mechanic) stated them to be empty or redundant unless you have a backup to restore when things go wrong!
JC#79 said:
I had this same issue recently I thought it may be due to upgrading to activsync 4.5.
But it seemed not to make much difference when I attempted to work it on another pc using activsync.
The problem only occured after I had been using pocket mechanic to delete files and free up dead registry files.
I didn't want to do a hard reset straight away so instead I restored an older backup from before the issue started & since then the problem has been resolved.
So I guess the question is do you have an older backup than the one you have tried if so try it & see. Other than that a hard reset may well sort the issue?
Hope this helps, and serves as a warning to others don't delete certain reg keys even if a program (pocket mechanic) stated them to be empty or redundant unless you have a backup to restore when things go wrong!
Click to expand...
Click to collapse
Yeah a backup is a good idea but most dont do that . And yeah some cleaners do remove more than they should.
PURESKILLZZZ said:
Ok .. Lets chase the possible software issues . What rom are you running and what have you installed ?
Click to expand...
Click to collapse
I'm running the official T-Mobile Netherlands ROM
My installed progs are:
anton tomov pocket mechanic
MASPware benzineverbruik
Google Maps
Microsoft .NET CF 2.0
Shannon and Keane pGCalSync
Pocket e-sword
Microsoft SQLCE 2.0
HudsonMobile Phonedashboard
------
I-mate WMP Today
MGSH Magicall
Scrary Bear Software Check Notifications
Noisette Software CedeFTP
BuildXPDA Bandwidth Calculator
Dinarsoft MemMaid
SPB GPRS monitor
Chi-Tai Dang BatteryStatus TD-plugin
Illium Software eWallet
GB-SOFT Tweak
Resco Today Plugin
Resco Registry Add-in
Resco FTP add-in
Resco Explorer
Microsoft Remote Display Control
Conduits Pocket IP
Thunder WM5torage
Tomtomt Navigator v6.020.7980
PC Counselor Tweaks2k2 .NET
Nyxbul Software Contacts Backup
SPB Backup APCp CalSyncUm
Modaco nodata
SBSH.Net Phoneweaver
Macromedia Flash Player ActiveX
oggsync.com oggsynccab
Mike Simpson Chardguru
Backmann Software Printboy
Shape Services IMPlus
HTC X-button 1.5
Spb Diary
LSDsl EasySetOwner
Daniel Herrero Bandswitch
Vicsoft ClearTemp
Acpecto Software Wififofum
Please advice...
mauce said:
I'm running the official T-Mobile Netherlands ROM
My installed progs are:
anton tomov pocket mechanic
MASPware benzineverbruik
Google Maps
Microsoft .NET CF 2.0
Shannon and Keane pGCalSync
Pocket e-sword
Microsoft SQLCE 2.0
HudsonMobile Phonedashboard
------
I-mate WMP Today
MGSH Magicall
Scrary Bear Software Check Notifications
Noisette Software CedeFTP
BuildXPDA Bandwidth Calculator
Dinarsoft MemMaid
SPB GPRS monitor
Chi-Tai Dang BatteryStatus TD-plugin
Illium Software eWallet
GB-SOFT Tweak
Resco Today Plugin
Resco Registry Add-in
Resco FTP add-in
Resco Explorer
Microsoft Remote Display Control
Conduits Pocket IP
Thunder WM5torage
Tomtomt Navigator v6.020.7980
PC Counselor Tweaks2k2 .NET
Nyxbul Software Contacts Backup
SPB Backup APCp CalSyncUm
Modaco nodata
SBSH.Net Phoneweaver
Macromedia Flash Player ActiveX
oggsync.com oggsynccab
Mike Simpson Chardguru
Backmann Software Printboy
Shape Services IMPlus
HTC X-button 1.5
Spb Diary
LSDsl EasySetOwner
Daniel Herrero Bandswitch
Vicsoft ClearTemp
Acpecto Software Wififofum
Please advice...
Click to expand...
Click to collapse
Almost every program you named I have installed various times . And I know from experience quiet a few of them clash . Biggest example is the anton tomov pocket mechanic and PC Counselor Tweaks2k2 .NET. Both of those running with the resco stuff is utter ciaos.
Hell this is complicated...
I have the same problem although my mda compact III (T-Mobile) is pretty new! Would it help to
a) install activesync 4.5 (I currently use 4.2)
b) to debrand it
Hope there is a simple solution... and many thanks in advance for it!!!
I had a similar problem, are you guys using a firewall? if so you may need to open a port or what I do is temporarily deactivate my firewall when I connect my orbit to my pc.
Hope that helps.

O2 Orbit Niggles

Ive had an O2 Orbit for a few months now, and have to say its the best phone ive ever owned, I used to own an XDA Mini S.
However just a few questions.
1) My wifi disconnects all the time, literally withing 1-2 mins of connecting to the wifi, I have no idea why its doing it, DCHP is set up manually, and im using a Belkin N1.
2) Im using No Data to stop the GPRS from connecting when IE opens accidently in my pocket and ends up costing me £7 a month in bloody errors! But i was wondering with GPRS stopped will I not know if someone has sent me an MMS?
3) Is there a decent Music player that will play music off the network, at the moment TCPMP is the only one that works, but its interface does not really apply well to song playback.
4) Another annoying thing! It appears when I turn the screen off, it seems to disconnect the wifi (although that could be more 1 related), and also turns off the sound, so it means I have to have the screen on in my pocket if i want to listen to music!
Sorry for the multiple questions!
WIFI could be a number of things.....most important thought what ROM are you running? Are you still plugging along with WM5, If you are I strongly suggest you give Tom Codon's Black and Blue Version 3 a spin. This will probably resolve a couple of your issues and is rock solid stable.
IIRC having GPRS stopped won't stop notification of an MMS, I'm sure you will receive a standard SMS message to alert you that you have a message waiting for download, you will need to re-enable your GPRS to download it.
I use Pocket Lan to give me access to Network shares, and have found pPod a pretty easy piece of music software to live with.
Turning off the screen should not affect your WIFI connection, is your WIFI running at full power within the phone, as I along with many others have found that this is the only setting that makes the WIFI function useable.
Take a look at the WM6 Artemis thread http://forum.xda-developers.com/forumdisplay.php?f=362 and read up on B&B3 from Tom, and BE VERY sure you have read the instructions and use USPL, the upgrade to WM6 is easy and will BLOW you away....
StevenAFC said:
2) Im using No Data to stop the GPRS from connecting when IE opens accidently in my pocket and ends up costing me £7 a month in bloody errors! But i was wondering with GPRS stopped will I not know if someone has sent me an MMS?
4) Another annoying thing! It appears when I turn the screen off, it seems to disconnect the wifi (although that could be more 1 related), and also turns off the sound, so it means I have to have the screen on in my pocket if i want to listen to music!
Sorry for the multiple questions!
Click to expand...
Click to collapse
2) MMS is sent over O2 Active (O2 WAP) Internet Explorer will not connect to O2 over WAP so you can leave the settings for that available when you run a program called No GPRS. http://forum.xda-developers.com/attachment.php?attachmentid=40638&d=1180860606
4) When you press the button on the side you don't just turn of the screen, you put the device into standby. It works differently to your previous device in that respect. There is no work around for Windows Media Player as far as I know, WMP forces the screen to stay on on a dim setting. Take a look at Mortplayer as an alternative: http://www.sto-helit.de/index.php?module=page&entry=mp_overview&action=view It has settings that allow the screen to turn it's self off whilst in use.
Thanks for replies.
Ill have a look into upgrading to wm6 I was hoping o2 would have an official rom out by now!
StevenAFC said:
wm6 I was hoping o2 would have an official rom out by now!
Click to expand...
Click to collapse
It is soon, very soon.

Categories

Resources