MDA 2 serial v1.03 cant be flashed. - Upgrading, Modifying and Unlocking

Hello all,
Today I receibed a mda2 from T-Mobile.
This phone displayed, Demo not for sale.
I thought I flash it with rom of quetek rom. Error about wrong id. Now the phone wont power. Only display serial v1.03
Tried many thing. Pressing reset, power and menu button no help, phone only reboots.
Pls help me out
Thx

I tried to update by sdcard fails aswell:
Sections=1 Not allow update!
Pls tell me what to do

Related

Need help. Tried to upgrade the ROM.

Hi guys.
Was hoping you could help me out.
I performed a search on the forums and didn't find the answer.
I have an O2 XDAII.
I tried to upgrade the ROM from the O2 site.
The upgrade somehow went south and the only thing I have on the sceen of the device is:
At the top - "Serial"
At the bottom - "v1. 06"
I tried taking out the battery and then putting it in again, but the same things appear on screen as detailed above.
Any suggestions/advice would be gladly appreciated.
I had that.
I plugged back in the USB cable and the message changed from Serial to USB - I then re-ran the ROM upgrade and it all worked OK.
Give it a try and let me know how you got on.
I'm getting the same problem. On my phone (UTStarcomm PPC6700), I have the Serial/USB header, with a V1.00 on the bottom.
When I first attempted the ROM Upgrade, it switched over to the screen. I've tried removing the battery, resetting, and re-launching the ROM upgrade app, but nothing.
Any other ideas???
solutions found?
Anyone know the solution?
larboleda said:
I'm getting the same problem. On my phone (UTStarcomm PPC6700), I have the Serial/USB header, with a V1.00 on the bottom.
When I first attempted the ROM Upgrade, it switched over to the screen. I've tried removing the battery, resetting, and re-launching the ROM upgrade app, but nothing.
Any other ideas???
Click to expand...
Click to collapse
ISTR that when you get to that screen it is after a hard reset.
You should just be able to hook up the USB cable and re-install the rom.
If you are having problems re-installing the rom, what sort of error messages are you getting?
Have you tried installing another ROM?
Serial v1.01
This is all that is written on the grey screen after trying to install ROM. Does anyone know how to proceed? I have an i-mate Jasjar.
It doesn't sound as though the rom is getting installed properly.
Do you get any error messages from the ROM installer?
I did not get any errors while installing. I did upgrade to 1.30.101 some weeks ago, but the phone turned very slow and froze. Therefore I now tried to install 1.30.77. Now the screen is grey and the only text is serial and v1.01. Anyone know how to proceed?
problems updating ROM
I have a Tmobile MDA PRO. I updated the ROM to the newest version, but now my phone only displays a screen with a tmobile logo, and the version information and thats it.
I tried to do a hard reset and still the same thing, I tried to redo the ROM install program, but its says[error message 101] that my phone is on but it cannot connect to it.
I have had my phone for one day and it is virtually useless.
Can someone please tell me how to flash the rom, or which is the best ROM to install for the mda pro/qtek 9000 series?
Help would be much appreciated!!!!!!!!!!
koolaid4star said:
I have a Tmobile MDA PRO. I updated the ROM to the newest version, but now my phone only displays a screen with a tmobile logo, and the version information and thats it.
I tried to do a hard reset and still the same thing, I tried to redo the ROM install program, but its says[error message 101] that my phone is on but it cannot connect to it.
I have had my phone for one day and it is virtually useless.
Can someone please tell me how to flash the rom, or which is the best ROM to install for the mda pro/qtek 9000 series?
Help would be much appreciated!!!!!!!!!!
Click to expand...
Click to collapse
Go and get your MDA PRO into Bootloader Mode: Press backlight + power button and do a reset. You should now see without backlight on top of your screen: serial and on the bottom: v.1.xx
Now connect MDA PRO with the USB datacable and run the ROM Update
again .. hopefully you have 50%+ battery capacity
ive got a wizzard .... my prob is that i installed da rong rom ... and now my usb port is not working ... its not charging neither is it connecting to da usb for active sync ... tell me wat to do ....

o2 xda executive rom update gone awry

hi hope someone can help me.i tried updati ng my xda exec after downloading the rom update from o2, and now my pc doesnt recognise the xda and my xda doesnt start its gone completely bank.i tried holding the softkeys and pressing the reset button, it says hit 0 to get back to factory settings and nothing happens........please it looks like my phones gone comatose
Moved to Uni Upgrade forum form Upgrade general
i believe u r stuck in bootloader
hi
try the following
disable usb connection from connection settings in active sync
then re upgrade the rom , and when you reach the screen where it tells u the rom version (it wont tell u this time) u ll HAVE to wait for few seconds before pressing "upgrade" , hopefully it will work this time
good luck
hi
hi there, i tried upgrading my 02 xda executive from the software update on O2 website.my active sync 4.1 stopped working in midst and my xda is nt working now.and my pc isnt recognising the xda. the xda isnt starting up its completely dead.I tried hitting the 2 softkeys and the soft reset button and the screen lights up and it says to rollback to factory setting hit 0 zero, but nothing happens................plz help would be appreciated.http://www.my-xda.com/xdaExecSoftware.jsp
also the screen now has USB and v1.00 over it and shows nothing but this and not starting up and my pc pops a message up saying that an unknown usb device and cant be connected
Does anybody have a solution to the above problem as I now have 2 xda execs in the same situation. It's a bloody nightmare! I understand it's in bootloader mode. Just don't know how to get the xda up and running again without sending it off to O2...
Please help!
LOOK HERE I have been in this situation myself a couple of times. Personally I use method 2 which is at the bottom of the page as it's very easy to follow. I suggest you try this method first.
Regards,
Psi
Those of you having trouble after a Rom Flash. If it goes wrong, start by pressing THE BACKLIGHT BUTTON, THE POWER BUTTON AND PRESS IN TO THE SOFT RESET HOLE ALL at the same time. This should put you back into BOOTLOADER. Then try your rom flash again. If the WM6 fails I re-flashed with the O2 EXEC WM5 first. Forget Active Synch saying it cant etc.
Providing you can just see some very faint words then you are back in bootloader. I have got the original O2 XDA EXEC WM5 Rom files so if you want them, as I can not find out how to put a large zip file on here then I can email it to you. Let me know on
[email protected]
pls i need it send to [email protected]

my jasjar stuck in serial mode even after rom update 1.30

hi!
i need help to resolve the problem i upgrade the rom to 1.30 and now it stay on the screen in serial mode 1.01 and even if i take the buttery off and then i put it back and close the red butten it dosent help if i do hard reset it ask me to press 0 to clear rom , so i press and after 2 sec the light go away and you see again serial mode , if i do bootloader power light and reset it also stay in serial mode , can anybody help me ? i bought this phone for alot of money is important for me , ill be glad if any one can help ,
thanks again in advance.
problem solved i update bl to 1.2
thank you very much what solve the problem is bl update 1.2

Help me... upgraded but now stuck at operator splash

Hi, I seem to have bricked my Universal. Apologies, I did search the forum & wiki etc., I wouldn't say I'm an expert but I've upgraded/downgraded ROM & radio many times before
First I tried to flash with the rDosti, otherwise known as Tomal's - v7.7: WM6.1 Pro
The flashing process went OK, but then after I hard reset the operator splash screen comes up - the T-Mobile screen - and the version is listed as 2. THING xx, like it should. However, my device remains frozen at this screen.
I hadn't upgraded to Bootloader 1.01, it was 1.00 like the documentation in the thread said, so I did this and reflashed again, same thing.
Then I tried flashing with the T-Mobile official WM5 in desperation - the same thing happens, the text on the splash says it's WM5 but it freezes here.
Then I reflashed the bootloader and WM6 several times again with the same results.
Can anybody help me with this pretty please? Thanks for any help!
try original1.....search in de forum.....
diji1 said:
Hi, I seem to have bricked my Universal. Apologies, I did search the forum & wiki etc., I wouldn't say I'm an expert but I've upgraded/downgraded ROM & radio many times before
First I tried to flash with the rDosti, otherwise known as Tomal's - v7.7: WM6.1 Pro
The flashing process went OK, but then after I hard reset the operator splash screen comes up - the T-Mobile screen - and the version is listed as 2. THING xx, like it should. However, my device remains frozen at this screen.
I hadn't upgraded to Bootloader 1.01, it was 1.00 like the documentation in the thread said, so I did this and reflashed again, same thing.
Then I tried flashing with the T-Mobile official WM5 in desperation - the same thing happens, the text on the splash says it's WM5 but it freezes here.
Then I reflashed the bootloader and WM6 several times again with the same results.
Can anybody help me with this pretty please? Thanks for any help!
Click to expand...
Click to collapse
2days ago i got this problem .but now i recover my divice with '' mtty for remove all botloder imege . then updat with new rom.
first u have to know is ur divice G3/G4. then u flash with rom file
Hi, thnx for replies, but im afraid you misunderstood me somewhat.
The *upgrade* process appears to work, ie. Bootloader seems to work fine, the device freezes at the first *operator* screen*, where it shows OS & radio version - the t-mobile screen, NOT the bootloader.
I tried the "Exit_bootloader" app (=mtty?) with no success.
An
do 1thin u update another rom...make sure dat ur fone is g3/g4..then update. coz if u update the wrong rom dis wl happen...
Thanx. I own 3 universal & I upgraded another with the same ROM & it worked no probs. So problem is not with the ROM.
The device with the freeze is G3.
mamaich method
Step by Step :
get the tools at attachment , as mamaich told, you have to use it in bootloader mode , (Power + Light Bulb + Reset)
1. Stop Activesync USB connection
2. Uni : Reboot Bootloader then Connect USB
3. PC : Run mtty1.42.exe
4. Choose USB in "Port" (Reconnect if can't find/reconglize USB and try remove sim and sd card)
5. type : task 28 55aa
6. Press Enter
7. Cause DOC reformatted, so there's no rom in DOC ,try reflash any rom that you like .
For task 28 55aa in mtty success , will show the message (attachment )
DONE .
Thanks satanisme.
I had the same problem, I have had a good look around but yours is the best description of how to get out of the splash screen.
regards
Gingerchristopher the biodesel king.
Thanks satanisme.
I had the same problem, I have had a good look around but yours is the best description of how to get out of the splash screen.
regards
Gingerchristopher the biodeisel king.

HELP! I think brick my phone!!

Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
dehzincwb said:
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
Click to expand...
Click to collapse
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
henk2484 said:
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
Click to expand...
Click to collapse
thx!! really appreceate!!! thx! it's back to work! thx!!!!!
i have the same problem where my phone freezes at the boot screen, where it says touch diamond and thw orange writing in the corner. It was working fine, happened all of a sudden after i soft reset it, when the phone initally froze on an incoming call
Any suggestions?
just Change your ROM..,
hard reset is somthing i dont want to do. Is there any other option?
kerm said:
hard reset is somthing i dont want to do. Is there any other option?
Click to expand...
Click to collapse
I think not. Don't know if you have a lot of apps installed after flashing. What you could do is find a ROM that's UC2/sUC compliant. If you create a folder structure on your internal storage like this:
ROOT > Backup and Restore > CAB > CABi
Put all the cabs you want on your device in the CAB folder and all the cabs you want on internal storage in CABi folder. After flashin and initial customization you will find yourself in User Customization (UC). It will state that it found a CAB folder, choose to install. After this it will state that it found a CABi folder, install as well. This reduces the effort of installing all apps after a hard-reset. As for messages, contacts e.g. I suggest you use PPCPimBackup.
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Go1den3ye said:
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Click to expand...
Click to collapse
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
henk2484 said:
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
Click to expand...
Click to collapse
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Go1den3ye said:
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Click to expand...
Click to collapse
Before you try to flash anything other then a stock ROM, I suggest you take a look at this thread: http://forum.xda-developers.com/showthread.php?t=416211
You need to have Hard-SPL flashed before flashing any custom ROM. My advice would be to use this one: http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705
cool, will try that one. thnx
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
dalco said:
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
Click to expand...
Click to collapse
Did you hold the volume down button while pressing reset? After pressing reset you should keep holding the volume down button until the tri-color bootscreen appears.

Categories

Resources