Related
I was upgrading my O2 xda II. suddenly my laptop battery died & system went into hibernation mode & as such upgrade was interrupted. My device was dead & it's Screen dosen't displays anything other than O2 logo.
I tried to start upgrading process all over but windows dosen't recognizes the device or finds the device to b turned off.
Pls advice me Wat can i do to turn my device on.
Pls..................................
The same happening to me . My device blank, window cannot recognize . Please is anyone can .please HELPPPPPPPPP>>
Hi Adeev,
Put yr device into bootloader mode and then redo the upgrade...I hope u know how to go into Boot Loder Mode...
Hi Adeev,
Put yr device into bootloader mode and then redo the upgrade...I hope u know how to go into Boot Loder Mode..
Thank's for ur reply bro. I tried to put device into bootloader mode (power+reset+Dpad) but it isn't working. the splash screen isn't gone yet. For how long do i have to hold these buttons. Do i have to hold these 3 together or press them one by one. Pls send me some more details. Thanks
Thanks u
hello frnds,
thanks a ton for ur help. My device is working & even better than before.
once again thanks u for ur kindly help.
May god fill ur file with happiness & prosperity.
Once again thanks
Regards,
Adeev
hi hope someone can help me.i tried updati ng my xda exec after downloading the rom update from o2, and now my pc doesnt recognise the xda and my xda doesnt start its gone completely bank.i tried holding the softkeys and pressing the reset button, it says hit 0 to get back to factory settings and nothing happens........please it looks like my phones gone comatose
Moved to Uni Upgrade forum form Upgrade general
i believe u r stuck in bootloader
hi
try the following
disable usb connection from connection settings in active sync
then re upgrade the rom , and when you reach the screen where it tells u the rom version (it wont tell u this time) u ll HAVE to wait for few seconds before pressing "upgrade" , hopefully it will work this time
good luck
hi
hi there, i tried upgrading my 02 xda executive from the software update on O2 website.my active sync 4.1 stopped working in midst and my xda is nt working now.and my pc isnt recognising the xda. the xda isnt starting up its completely dead.I tried hitting the 2 softkeys and the soft reset button and the screen lights up and it says to rollback to factory setting hit 0 zero, but nothing happens................plz help would be appreciated.http://www.my-xda.com/xdaExecSoftware.jsp
also the screen now has USB and v1.00 over it and shows nothing but this and not starting up and my pc pops a message up saying that an unknown usb device and cant be connected
Does anybody have a solution to the above problem as I now have 2 xda execs in the same situation. It's a bloody nightmare! I understand it's in bootloader mode. Just don't know how to get the xda up and running again without sending it off to O2...
Please help!
LOOK HERE I have been in this situation myself a couple of times. Personally I use method 2 which is at the bottom of the page as it's very easy to follow. I suggest you try this method first.
Regards,
Psi
Those of you having trouble after a Rom Flash. If it goes wrong, start by pressing THE BACKLIGHT BUTTON, THE POWER BUTTON AND PRESS IN TO THE SOFT RESET HOLE ALL at the same time. This should put you back into BOOTLOADER. Then try your rom flash again. If the WM6 fails I re-flashed with the O2 EXEC WM5 first. Forget Active Synch saying it cant etc.
Providing you can just see some very faint words then you are back in bootloader. I have got the original O2 XDA EXEC WM5 Rom files so if you want them, as I can not find out how to put a large zip file on here then I can email it to you. Let me know on
[email protected]
pls i need it send to [email protected]
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Which ROM did u reflashed ?
Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
hello there..i've also got the same problem....i've download he rom update software from 02 uk...after install in my exec...and hard reset..it hang in the boot screenn...
please help..all the pda genius....!!!!!!!!!!!!!!!!! i'm worried!!!!!!!!!!
Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
i've also got the same problem...i've update the rom after dwnloas the rom software update from o2 uk....after suceesfull install to my exec...i've hard reset as per instruction.....but..it just hang in the boot screen mode...
please helppppp all the pda guru's and master!!!!!!!!!!1 i'm worried!!!!!!!!!
Have u tried reflashing it again via bootloader mode ?
niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
... what's the "bootloader mode" ??... (it's not documented in the user guide, is that a sequence after pressing 2-3 buttons together or something like that ?)
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
dear kumar..i've tried for a few times...eventually i've tried to reinstall using the old rom..but its still hang....
i've contact o2 custpmer support ..they asked me to send it to the service centre...then i ask how to send and the charge would be (eventully i'm in malaysia right now) but they ask me to call the service and warranty centre personnally..
i've called them but the line was so bad and can't hear them clearly. Even so i've given my email address for them to email me their correct address for me to sent it..and their email address for me to communicate..but until now..no news....
please help me sir!!!
U shld better get it replaced .
niketkumar said:
Which ROM did u reflashed ?
Click to expand...
Click to collapse
What ROM did you guys flash? My suspicion is rising that one of the new AKU3.2 ROMS is the culprate, and that there is something wrong with one of them.
niketkumar said:
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
Click to expand...
Click to collapse
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
No need 4 thanx buddy this is just we all r here for to help each other neways i m happy to hear dat u got it rite.
still stuck at serial and 1.00
hi.. i had installed WM6 on my o2 exec, i dont know why but had some signal issues with it, so i tried to roll back to 1.30 from the official O2 site... 1st time i tried to update, the PDA got reset just at the begining of the checking process... i tried again 2nd time this timed it just died.. now hard reset as well as the bootloader both just get stuck at the same damn screen "Seria" on top and "1.00" at the bottom.. i've kept the piece on charging for several hours now... no matter what i do, nothing happens.. just the same screne for hrs and hrs and hrs.. i removed the battrey and put it back... stil the same screen... someone pls advice... its just breaking my heart..
trouble with rom update
Like Acer, my device has a trouble with the rom too. In this case, I'm trying in bootloader mode but the rom doesn't instal. The first screen shows only the rom which is going to upgrade and when instalation finishes nothing was upgraded. Can you help me?
Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
blank screen
i too had the same problem, after installing the rom update from o2 site...
i had to send my set to servicing then only i got it right..
alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
I do not know how, but now my Uni work again
and now, I install Pdaviet 2.10.10
It's working now .....
I had the same problem, i had to send it to the O2 repair canter, they fixed it, but was returned with out the up grade, now im afraid to re-try.
alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
Got the same problem here after using PDAVIET...
No upgrade working
This happens with the uni sometimes regardless of rom. Remove the battery wait 5 minutes enter bootloader and reflash. If it doesnt work reflash again just the CE os rom. It will kick out in one of those. It usually helps to flash to operator stock rom first then back to wm6 or cooked WM5. (You have not hurt the device, the uni is a picky girl but always comes back
Hi all i am new to all this i tried to load a newer rom on my Imate it had an error and froze did a reset and now it only comes to the 3 colour boot screen i have tried a hard reset but no luck and have downloaded the offical rom again i can get into the bootloader screen by pressing camera button and on and connect with the usb the thing is how do I load the rom the Program"RUU program" says u must have a active sync connection and it will not work in the bootloader it says usb in the left conner but active sync will not work is there any other program that doesnt use active sync to load the rom to my phone i have been reading the forum and seen similar problems all with the reply load wizardlove cant find the it all the links are broken or doesnt excest I need to get my phone running asap and if i send it in it will only be returned inn 6weeks they say I am from south africa and the guys here can be a lot of help coz the know nothing so if anybody can help me please it would be great thanks
Which is your device a G3 or G4 ? post the IPL/SPL...? of the phone to determine the version. As far as it gets to bootloaders (tricolor screen) you are safe,its just a bad flash,nothing to worry,you'll soon have it working fine.
Which rom were you trying to upgrade to ? and what exactly were you doing.First, is your phone SIM/CID unlocked,if you were trying to upgrade to a latest wm6 rom,its essential to have the phone CID unlocked
Secondly,while in bootloaders, Activesync doesn't work,you got to have a working OS on the phone to sync with activesync,but when in bootloaders and usb appears in the bottom of the screen,you can flash the rom.
Cheers!
K Jam hangs at blue screen
Hi to all,
I have a K jam more then 1 years old. Now It is giving some probem. There is no display but only light in the screen but I make call and recieve calls!.
First time when problem arised. I pressed 3 battons(2 left side and 1 up side)the screen will became perfect and when I remove the battery & reinserted, the problem arised again. When I asked some 2 to 3 mobile service mens, thay told that there is a problem with OS (By reinstalling the OS it will be repaired). I think probem is with the strip connect motherboard to the LCD, that could be cuted but service mens told no, it is problem with OS.
Where I can get the OS, WM5 is preinstalled in it.
Still it did not open the mobile. Please help me
Many Thanks for all
Srikanth.K
hellol i m facing the same problem when i start my imate k jam it does nt boot to windows n stopd on three color screen wht to do now help me plz to sort out
I feel your Pain! im in the same boat the three colour screen! all my Imate only gives
me IPL 2.16.0001 an SPL 2.16.0001 not even an OS
i downloaded wm6 from here and i followed some step of senior member of these site.now i have a problem.when i upgraded my mobile restart after booting and again restart so i am in serious problem.what can i do now.any help.
my imate k-jam ipl 1.01 and spl is 1.06
please help me
hello this is my first post in this forum and I hope you accept me as friends on this section of HTC Touch Diamond
.. I have a HTC Touch Diamond P3700 ( new) and since yesterday he cannot be Started on .. and I tried several solutions (reset ....) but no result
Could you provide me a solution Please
My Greetings
Aziz
Nice use of font colors. Unfortunately the same cant be said for your phone. Whats your location and from which (country) did you buy your touch diamond from
Just be patient and listen ayyu3m to explain you and he will help you 100%.I have more worst problem than u have
sorry i was not here for yesterday
im from morocco
and the fone is from : SFR France original and made in taiwan
thanks a lot my friends
i wait your repley
regards
newlead said:
sorry i was not here for yesterday
im from morocco
and the fone is from : SFR France original and made in taiwan
thanks a lot my friends
i wait your repley
regards
Click to expand...
Click to collapse
Okay. So what exactly did you do or what exactly happened to your phone?
man did ya try to charge it? maybe the bettray is dead and can ya load the boot screen u know just press the down volume button and reset see if u can see the three colors screen if its then dont worry ... worst thing is just re-flash the rom PM me for extra help buddy
I have the same problem with my phone after i tried to update rom.
I flashed hardspl 1.40.OliNex and then Diamond_Radio_1.00.25.07 ...everything ok until i tried ruu_diamond_orange_ro_1.37.70.1_radio_signed_diamond_52.33a.25.17_1.00.25.08_ship.
Now it only shows an image with orange and
r: 1.12.25.19
g: 52.60.25.33U
d:1.93.00.00
and nothing else since yesterday... I can get it to bootloader tricolor screen but that's all cause no matter what i try to flash it stops randomly at X% and get error update. The only difference was Radio_1.12.25.19 that seemed to work. Hard reset doesn't work either cause i get the same start image with orange and that's all.
lexxa v said:
I have the same problem with my phone after i tried to update rom.
I flashed hardspl 1.40.OliNex and then Diamond_Radio_1.00.25.07 ...everything ok until i tried ruu_diamond_orange_ro_1.37.70.1_radio_signed_diamond_52.33a.25.17_1.00.25.08_ship.
Now it only shows an image with orange and
r: 1.12.25.19
g: 52.60.25.33U
d:1.93.00.00
and nothing else since yesterday... I can get it to bootloader tricolor screen but that's all cause no matter what i try to flash it stops randomly at X% and get error update. The only difference was Radio_1.12.25.19 that seemed to work. Hard reset doesn't work either cause i get the same start image with orange and that's all.
Click to expand...
Click to collapse
and pls tell me where you bought ur diamond from and if you know the stock rom which shud be in ur device.
even if u dont know the answer to 2nd question tell me where you bought ur phone and ur country
ayyu3m said:
and pls tell me where you bought ur diamond from and if you know the stock rom which shud be in ur device.
even if u dont know the answer to 2nd question tell me where you bought ur phone and ur country
Click to expand...
Click to collapse
I live in Roumania and bought the phone from someone and i don't know where did he get it from... but when i tried the official htc suport they said that my phone was made for Czech Republic and that's why my ROM update doesn't work...
The answer to second question is that i don't know
Can someone help me please? I don't know what to do now...
Btw the person from whom you bought the device is a resident of Romania?
Yes, he is.
okay can you go into bootloader mode and tell me everything on the screen
DIAM100 MFG 64G
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Please try again
USB
thankx. thats all i need for now. let me try to come up with a rom for you...
btw did you have any carrier logo before you ran into this problem...i mean like instead of the orange logo did you have any vodafone logo or just the htc logo during start up
AND do you have a front facing camera for video calls?
I had only the htc logo at start-up and i do have a video camera front facing.
Okay i found your stock ROM.
Do exactly as i say....
go to this link and scroll down to bottom...
http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=2
when you go to the bottom of the page, you will be requested to enter ur SERIAL NUMBER which you just found under your battery.
Enter and press submit.
now select the file Windows_Mobile_6.1_East_Europe and start downloading...
let me know if the download has started also
I started the download ...
Okay good. So once the download complete you are ready to flash...
This is how to flash...
1. Put ur device in bootloader mode again.
2. Connect the device to ur PC
3. RUN the downloaded file....and press NEXT NEXT NEXT....
Reply back if the flashing process is goind smooth or even if you face any problem...
Then i can finally go and sleep