Hi to alll
firstly i want to thx all the admin,mod ,and members for this great forum
iam a new member here,and new with the xda
i got one xda which is always in Test mode
it show 4 colored bars and writtin on it" WALLABY BootLoader V5.17" "GSM OK"
i am reading in this forum but not find anything that can help me
so,can anyone tell how to fix it
best regards
almoudamer
It is in bootloader mode at the moment. Have you tried removing the battery, waiting 30 seconds and then putting the battery back on?
Was the XDA working OK before it went into bootloader mode? Have you tried to flash the ROM recently? If nothing is working have you tried a hard reset?
If none of these work perhaps flashing the ROM might be the only solution.
this is XDA device ... so you can't remove the battery (easily at least ) ... try the hard reset ... if doesn't work then flash your ROM with any WM2003 ROM from the kitchen but I think you will have to apply the patch for bootloader 5.17 first
hi
ths for ur quick reply
i received thre phone in this status
i didn't do anything yet
iam only trying to read at this forum
can u help me how and from where to get the files to flash or patch my device
thx in advance
best regards
hi again
i went to
http://lumpistefan.dyndns.org/
and cooked a rom there and downloaded it as exe installer
now iam trying to open it with windows Xp it open black window and disappear
and with windows Me it said that it is not a valid win32 application
so,any help?
I think you are going to have to use the boot loader and an sd card to do this.
down load an .nb1 file and transfer onto an SD card using an SD card reader.
put it in you xda and reboot while holdong down the power button.
That will load a new rom for you.
hi to all
thx for ur replies and help
i think the best is to write the nb1 file to sd card and boot the xda with this sdcard
Now iam trying to write this file with XDArit version1.2 .but i get error
Failed to open device\\.\PhysicalDrive5
and i read in this theard
http://forum.xda-developers.com/viewtopic.php?t=3274
that if XDArit version 1.2 not work,then i should use version 1
and iam searching for version one and cann't find it
anyone can help me to find it or how to write the file to the sd card
Byway,ActiveSync not able to detect the Xda
best regards
go to
www.yorch.net
for version one
Hi to all
finally i success to updade using my sd card
but
my problem still the same
the xda still in Bootloader Mode
so any help plz
best regards
hi to allll
finally i solved my problem
it was hardware problem
thx to alll who helped me
best regards
What was the problem? A button stuck down?
hehehe
someone solder the power bottom ,so he made short between the pins of the switch
so i noticed that this switch no use ,i pres bot nothing happen ,do i checked it ,and it was th problem
thx for all who helped me in flashing this device
iam now have good idea how to flash ti
best regards
Related
My English O2 with 5.17 bootloader can not be flashed by card from another O2 unite with Chinese OS. I managed to pass the diagnostic check and can flash it using backup card from itself. Can any one tell me the trick?
Problem solved. Thanks.
great ...
GoodLuck ...
but c i`ve same prblem u have ...could u please explane HOW didi u solve it?
thanx
Ok,
1.you must have power left in XDA
2.press volume button after you reset.
3.when you get to non-working or working today screen, sync with PC and delete update program in XDA's startup directory
4. reset
5. run update again.
Back to normal!!!!!!!
XDA 02 dead
Hi to all i need help
during upgrade my Xda is dead please if any one have sugestion how to startup agin , for the moment ,info from inaccess is not working for my xda model PM300
Pls help
Hello, I cant follow/or understand the guides found here or in
trinityguides to recover my device.
I have successfully flashed severa cocked roms before, however this last one failed and left me in tri-color screen displaying SPL-9.99-CP
What do i need to do, my active sync want connect and give me the green OK.
It say it cant detect my device when i connecs it?
Please help, im not good at this, how can i get the device to be recognized by
active sync?
Any help very much appreciated!
allanredo said:
Hello, I cant follow/or understand the guides found here or in
trinityguides to recover my device.
I have successfully flashed severa cocked roms before, however this last one failed and left me in tri-color screen displaying SPL-9.99-CP
What do i need to do, my active sync want connect and give me the green OK.
It say it cant detect my device when i connecs it?
Please help, im not good at this, how can i get the device to be recognized by
active sync?
Any help very much appreciated!
Click to expand...
Click to collapse
In bootloader mode AS will not recognized the PDA. As I see there is DES crash proof hard-spl on your PDA. Stay in bootloader mode, and try to flash an other rom, or the original offical rom. If does not work here is a useful link:
http://forum.xda-developers.com/showthread.php?t=308691
thanks for your quick reply!
how can i flash without the active sync is connected?
i have tried but the rom update utility says it cant find device and exits
or can it be done withot connection, if so how?
thanks for all input, as i said im not an experienced "flasher".
I don't know why, but after successfull cooked rom update (Schap, Faman, etc..) the last one didn't work and stick to 3-color (I'm under olipro 1.3)
I just made a spl update without any pb (take a look if on your pda screen it shows USB instead of serial) don't care about activsync
Then a radio update (1.40 instead of 1.50).
Shap rom update didn't work anymore (cache issue), so I'd just copied RUU_signed.nbh from SChaps replacing the one into Fman folder, and just working fine...
If it can help you.
Had this kind of problem
Simplest thing is to load rom from SD card (do search on this).
In short get the ROM you want - ROM***.nb file and rename it as TRINIMG.NB put it on the SD card. Launch bootloader and follow instructions. Otherwise check thread VISTA FLASH DISASTER...
Good luck,
Solved!
I reconnected the phone ( it sad USB in the bootloader btw)
Downloaded schaps wm6pro and unzipped, enterd the ruu and flashed, even thoug active sync was inactive.
I didnt have to go any further than this.
Many thanks, now i might dare to try som more roms, done ax3ls and karmba's so far looking forward to test schaps now.
Look in the Trinity Wiki. It describe how to flash from the SD card. this will fix you up.
hi guys,
i have a problem with my touch diamond. recently i flashed a rom with had dual boot in it. and i started facing the following problem.
some software in my phone hangs up and whenever restart, it doesnt boot. that is , doesent go beyon the screen that says "Touch Diamond" after doing the hard reset it becomes stable for a while. but after sometime it again does the same thing.
i would highly appreciate if anyone could help me with this issue.
aali-01 said:
hi guys,
i have a problem with my touch diamond. recently i flashed a rom with had dual boot in it. and i started facing the following problem.
some software in my phone hangs up and whenever restart, it doesnt boot. that is , doesent go beyon the screen that says "Touch Diamond" after doing the hard reset it becomes stable for a while. but after sometime it again does the same thing.
i would highly appreciate if anyone could help me with this issue.
Click to expand...
Click to collapse
You must flash the rom using MTTY
http://forum.xda-developers.com/showthread.php?t=540290
Thanks mate.
i am also facing the signal problem. and the device info says "1.20 olinex" in the radio version.
kindly suggest a gud radio as well.
aali-01 said:
Thanks mate.
i am also facing the signal problem. and the device info says "1.20 olinex" in the radio version.
kindly suggest a gud radio as well.
Click to expand...
Click to collapse
There is not a perfect radio.You must flash some radios from
http://forum.xda-developers.com/showthread.php?t=470306
and check which is the best.
As for 1.20 olinex i think you must upgrade to 1.93
where would i find that radio? what radio would u recomend ? kindly share the link.
thanks
aali-01 said:
where would i find that radio? what radio would u recomend ? kindly share the link.
thanks
Click to expand...
Click to collapse
i have 1.17 official diamond radio.But in every rom you flash there is a radio that chef recommend.
http://forum.xda-developers.com/showthread.php?t=580490&highlight=RADIO
brother i have downloaded the x86 driver from that link that you mentioned earlier. i have connected my device through USB in the bootloader mode. when i try to update the driver, my computer says that there is no need to do that !!. i am running windows xp. kindly help
aali-01 said:
brother i have downloaded the x86 driver from that link that you mentioned earlier. i have connected my device through USB in the bootloader mode. when i try to update the driver, my computer says that there is no need to do that !!. i am running windows xp. kindly help
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=4fQE0P3diKg
This a tutorial from awran5.
Search and the first link "the definite mtty thread"
brother i have tried everything but still not able to get USB in the combobox
brother this time everything was done. i entered all the commands and on the last command "task 8" it got restarted itself and didnt load any operating system. i also put my rom in the internal storage root.
kindly help me man !!!
aali-01 said:
brother this time everything was done. i entered all the commands and on the last command "task 8" it got restarted itself and didnt load any operating system. i also put my rom in the internal storage root.
kindly help me man !!!
Click to expand...
Click to collapse
Happy that all gone well.
Thanks to xda
You have to download the official rom from the htc web site... then flash it and after that flash first the recomended radio and then the rom that you chose...
I dont know if you already know but.... rename any rom that you want to flash with this name...DIAMIMG...and then copy it to the internal storage....after that restart....and press backwards and volume down keys together and install the new ROM....by pressing the power key...
think this will help
try this will definitely work cause i have same problem too!!
read carefully and try it if u have this problem u have to use mitty everytime u flash(i think cause for me is every time i flash new ROM)
xxxx://forum.xda-developers.com/showthread.php?t=540290
replace xxxx with http
Thanks to all man. my problem is solved.
After doing soft reset to my htc trinity it gave me black screen and nothing than this...tried flashing new rom i entered boot loader and flashed correctly but after it finished flashing and reset it gave me black screen also tried different roms but same proplem
Can Anyone help?!!
Hai...! I am not expert on this stuff . may the other can give you a good solution to solve your problem. Did you try to hard reset your device or do hard SPL before flashing? if you didn't do the Hard SPL that's the problems. Some one said to fix the broken Trinity with JTAG Solution, be careful to do this.
See for the thread about JTAG to unbrick your Trinity on this forum.
Hope it will help you...
hmmm..i use olipro 1.30 hard spl,,,but i am wondering why just it cant be replaced by old spl?? and also using the JTAG solution seems dangerous alittle
EgyPharaoh said:
hmmm..i use olipro 1.30 hard spl,,,but i am wondering why just it cant be replaced by old spl?? and also using the JTAG solution seems dangerous alittle
Click to expand...
Click to collapse
Hi EgyPharaoh, Have you tried flashing back to the Stock OEM ROM yet? That will usually fix problems with a bad flash for me. You can find it HERE. I would not recommend looking into JTAG just yet.
If this does not work, let me know and we will research the next step.
SuperSport said:
Hi EgyPharaoh, Have you tried flashing back to the Stock OEM ROM yet? That will usually fix problems with a bad flash for me. You can find it HERE. I would not recommend looking into JTAG just yet.
If this does not work, let me know and we will research the next step.
Click to expand...
Click to collapse
I started flashig it but it reaches about 28% then gives me upate error [262]..but i flashed official htc rom "HTC [WWE] v1.23.405.2] with no errors and when i open it it shows the "htc image" and freezes.
and it says in the readme that if this error showed then it might be that the wince is destroyed or in upgrade mode...how to know now wether it is destroyed or in the upgrade mode??
EgyPharaoh said:
I started flashig it but it reaches about 28% then gives me upate error [262]..but i flashed official htc rom "HTC [WWE] v1.23.405.2] with no errors and when i open it it shows the "htc image" and freezes.
and it says in the readme that if this error showed then it might be that the wince is destroyed or in upgrade mode...how to know now wether it is destroyed or in the upgrade mode??
Click to expand...
Click to collapse
Sorry about the delay, and thank you for the PM reminder.
Try flashing directly from the BootLoader Screen, by holding both the Power and Camera Buttons while you press and release the Reset Button using your stylus. Continue to hold the Power and Camera Buttons until your phone enters bootloader.
If that does not work, try to flash using your SD Card.
Using either 7zip or WinRAR, extract the contents of the OEM ROM you downloaded earlier. You are looking for the RUU_signed.nbh file inside. If you prefer to just download it, you can find it HERE.
Rename the file from RUU_signed.nbh to TRINIMG.nbh and copy it to your SD Card. Don't place it in any folder, just in the Root of the Card. Place the SD Card back into your phone if it's not already.
Now, Enter Bootloader by holding both the Power and Camera Buttons while you press and release the Reset Button using your stylus. Continue to hold the Power and Camera Buttons until your phone enters bootloader. It should at this time start to flash the OEM ROM you copied earlier. Hopefully, this will be successful. If it is, it will have replaced your HardSPL ROM & Radio, so you will need to flash those again.
Let me know if this works or not.
SuperSport said:
Sorry about the delay, and thank you for the PM reminder.
Try flashing directly from the BootLoader Screen, by holding both the Power and Camera Buttons while you press and release the Reset Button using your stylus. Continue to hold the Power and Camera Buttons until your phone enters bootloader.
If that does not work, try to flash using your SD Card.
Using either 7zip or WinRAR, extract the contents of the OEM ROM you downloaded earlier. You are looking for the RUU_signed.nbh file inside. If you prefer to just download it, you can find it HERE.
Rename the file from RUU_signed.nbh to TRINIMG.nbh and copy it to your SD Card. Don't place it in any folder, just in the Root of the Card. Place the SD Card back into your phone if it's not already.
Now, Enter Bootloader by holding both the Power and Camera Buttons while you press and release the Reset Button using your stylus. Continue to hold the Power and Camera Buttons until your phone enters bootloader. It should at this time start to flash the OEM ROM you copied earlier. Hopefully, this will be successful. If it is, it will have replaced your HardSPL ROM & Radio, so you will need to flash those again.
Let me know if this works or not.
Click to expand...
Click to collapse
Thanks For your solution but it didn't work
i did all what u said and that's what happened :-
TRINIMG.nbh
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM -
GSM -
Update In Progress...
and that's all it stops at the first..i read in another thread about flashing from sd card and it said that it may stop for a while but it stops forever
Next Step
TRINITY BACK!!! xD
YEAAAAH I DID IT
well supersport, thanks alot for your help...it helped me alot
the nbh file of the dopodasia rom u gave me didnot work so i tried the same thing but with the old rom i have, the "Htc official rom v1.23.405.2" i took the file named "TRINIMG_HTC_WWE_1.23.405.2_Ship.nbh" and renamed it to "TRINIMG.nbh" then put it in my sd card ..and flashed it and update succeeded and my trinity now works good..thank you and anyone helped in this thread
EgyPharaoh said:
YEAAAAH I DID IT
well supersport, thanks alot for your help...it helped me alot
the nbh file of the dopodasia rom u gave me didnot work so i tried the same thing but with the old rom i have, the "Htc official rom v1.23.405.2" i took the file named "TRINIMG_HTC_WWE_1.23.405.2_Ship.nbh" and renamed it to "TRINIMG.nbh" then put it in my sd card ..and flashed it and update succeeded and my trinity now works good..thank you and anyone helped in this thread
Click to expand...
Click to collapse
Awesome, glad to hear it worked. Remember, you will need to Flash HardSPL again if you want to flash Custom ROMs again, and also an updated Radio if you prefer.
SuperSport said:
Awesome, glad to hear it worked. Remember, you will need to Flash HardSPL again if you want to flash Custom ROMs again, and also an updated Radio if you prefer.
Click to expand...
Click to collapse
but i found that my radio & hardspl didnt change.
EgyPharaoh said:
but i found that my radio & hardspl didnt change.
Click to expand...
Click to collapse
Then you are fine. I guess you have an OEM ROM that has the HSPL and Radio stripped out of it.
Hello, I have a big problem I wanted to flash my htc with this method :http://forum.xda-developers.com/showthread.php?t=2094384
And at the end of the manip my telephone does not re-lay any more and stays with a black ecran...
please help me!!!
goudurisk said:
Hello, I have a big problem I wanted to flash my htc with this method :http://forum.xda-developers.com/showthread.php?t=2094384
And at the end of the manip my telephone does not re-lay any more and stays with a black ecran...
please help me!!!
Click to expand...
Click to collapse
Which verison of ROM you use RUS or EU, if RUS you may brick bootloader, try make HR or put device in service mode, if you successed puting your device in SM try again paste this files but on Windows 7 32bit, I tried on Windows 8 and flash files procedure doesn`t works and my device stay on service mode (racks) but on Windows 7 when I copied files all steps passed fine, but I used EU ROM
I have a similar problem.I tried to do debrand menu and after flash mobil do not work. Is still in black screen. Sometimes when i put in to charger the diod blinks (orange) hmmm 10-20second (is not problem with discarge the battery - it is fully charged). I flashed in this rom
- RUU_RIO_U_APO_00_HTC_Europe_1.04.401.03_1.11b.3054.25_10.13.30_RETAIL_ENC_RELEASE -
I did it already on other devices and everything was okay. Bat this time I did something wrong :
always i put on the memory card this file
UEFI_signed.nbh changing name to RIOUDIAG.nbh - and put into the memory FIRST - then i switching mobil on recovery (vol - , camera and switch on) the file was updated
then
RIOUDIAG.nbh - ROM - puting into the memory SECODN - then i switching mobil on recovery (vol - , camera and switch on) the file was updated
AND when I do on this method all will be ok BUT : )
I Flashed first rom file and my mobilephone is dead .... (I forgot that the first step is to update the UEFI file) and now The situation is such that the phone does not start. Windows "ZEUS flash device" and when i put in to charger the diod blinks (orange) hmmm 10-20second. Sorry for me english. Can anyone help me or direct what to do ? I do not want much to do j-tag. This is a new phone.
Hi
I can help U for 30 euro without sending taxes, U must send phone to me.
If someone interesting for details - email me.
Br
Shadowman
Hi I have the same problem, please anyone solve it? how?
Waiting for replay, thnaks.
Just dead
mourad_t said:
Hi I have the same problem, please anyone solve it? how?
Waiting for replay, thnaks.
Click to expand...
Click to collapse
I've same problem too. Nobody will solve it here then I'm sure. Whatever it was my secondary phone. I hate windows with hтс..
same problem here... no one can help us?
Have we got any news?
HTC 8S
Nazgul1379 said:
Have we got any news?
Click to expand...
Click to collapse
Any update on how to flash the rom?