HELP! O2 dead after flashing - Upgrading, Modifying and Unlocking

My English O2 with 5.17 bootloader can not be flashed by card from another O2 unite with Chinese OS. I managed to pass the diagnostic check and can flash it using backup card from itself. Can any one tell me the trick?

Problem solved. Thanks.

great ...
GoodLuck ...
but c i`ve same prblem u have ...could u please explane HOW didi u solve it?
thanx

Ok,
1.you must have power left in XDA
2.press volume button after you reset.
3.when you get to non-working or working today screen, sync with PC and delete update program in XDA's startup directory
4. reset
5. run update again.
Back to normal!!!!!!!

XDA 02 dead
Hi to all i need help
during upgrade my Xda is dead please if any one have sugestion how to startup agin , for the moment ,info from inaccess is not working for my xda model PM300
Pls help

Related

3 days and not solving my problem

Hi to alll
firstly i want to thx all the admin,mod ,and members for this great forum
iam a new member here,and new with the xda
i got one xda which is always in Test mode
it show 4 colored bars and writtin on it" WALLABY BootLoader V5.17" "GSM OK"
i am reading in this forum but not find anything that can help me
so,can anyone tell how to fix it
best regards
almoudamer
It is in bootloader mode at the moment. Have you tried removing the battery, waiting 30 seconds and then putting the battery back on?
Was the XDA working OK before it went into bootloader mode? Have you tried to flash the ROM recently? If nothing is working have you tried a hard reset?
If none of these work perhaps flashing the ROM might be the only solution.
this is XDA device ... so you can't remove the battery (easily at least ) ... try the hard reset ... if doesn't work then flash your ROM with any WM2003 ROM from the kitchen but I think you will have to apply the patch for bootloader 5.17 first
hi
ths for ur quick reply
i received thre phone in this status
i didn't do anything yet
iam only trying to read at this forum
can u help me how and from where to get the files to flash or patch my device
thx in advance
best regards
hi again
i went to
http://lumpistefan.dyndns.org/
and cooked a rom there and downloaded it as exe installer
now iam trying to open it with windows Xp it open black window and disappear
and with windows Me it said that it is not a valid win32 application
so,any help?
I think you are going to have to use the boot loader and an sd card to do this.
down load an .nb1 file and transfer onto an SD card using an SD card reader.
put it in you xda and reboot while holdong down the power button.
That will load a new rom for you.
hi to all
thx for ur replies and help
i think the best is to write the nb1 file to sd card and boot the xda with this sdcard
Now iam trying to write this file with XDArit version1.2 .but i get error
Failed to open device\\.\PhysicalDrive5
and i read in this theard
http://forum.xda-developers.com/viewtopic.php?t=3274
that if XDArit version 1.2 not work,then i should use version 1
and iam searching for version one and cann't find it
anyone can help me to find it or how to write the file to the sd card
Byway,ActiveSync not able to detect the Xda
best regards
go to
www.yorch.net
for version one
Hi to all
finally i success to updade using my sd card
but
my problem still the same
the xda still in Bootloader Mode
so any help plz
best regards
hi to allll
finally i solved my problem
it was hardware problem
thx to alll who helped me
best regards
What was the problem? A button stuck down?
hehehe
someone solder the power bottom ,so he made short between the pins of the switch
so i noticed that this switch no use ,i pres bot nothing happen ,do i checked it ,and it was th problem
thx for all who helped me in flashing this device
iam now have good idea how to flash ti
best regards

Yes - another XDA IIs stuck in bootloader

Please, please help... During an O2 rom upgrade my xda IIs suddenly rebooted and now it is stuck in bootloader mode. I have worked out there is no rom left in the phone.
I have tried evrything I could search for in the forums but I get the dreaded error 101 whenever I try to re run the o2 upgrade. It seems the xda won't connect to anything.
ANY suggestions would be appreciated
Read Wiki
Especially for the No Operator Updade files, that might hepl you.
ok then...wish me luck

o2 xda executive rom update gone awry

hi hope someone can help me.i tried updati ng my xda exec after downloading the rom update from o2, and now my pc doesnt recognise the xda and my xda doesnt start its gone completely bank.i tried holding the softkeys and pressing the reset button, it says hit 0 to get back to factory settings and nothing happens........please it looks like my phones gone comatose
Moved to Uni Upgrade forum form Upgrade general
i believe u r stuck in bootloader
hi
try the following
disable usb connection from connection settings in active sync
then re upgrade the rom , and when you reach the screen where it tells u the rom version (it wont tell u this time) u ll HAVE to wait for few seconds before pressing "upgrade" , hopefully it will work this time
good luck
hi
hi there, i tried upgrading my 02 xda executive from the software update on O2 website.my active sync 4.1 stopped working in midst and my xda is nt working now.and my pc isnt recognising the xda. the xda isnt starting up its completely dead.I tried hitting the 2 softkeys and the soft reset button and the screen lights up and it says to rollback to factory setting hit 0 zero, but nothing happens................plz help would be appreciated.http://www.my-xda.com/xdaExecSoftware.jsp
also the screen now has USB and v1.00 over it and shows nothing but this and not starting up and my pc pops a message up saying that an unknown usb device and cant be connected
Does anybody have a solution to the above problem as I now have 2 xda execs in the same situation. It's a bloody nightmare! I understand it's in bootloader mode. Just don't know how to get the xda up and running again without sending it off to O2...
Please help!
LOOK HERE I have been in this situation myself a couple of times. Personally I use method 2 which is at the bottom of the page as it's very easy to follow. I suggest you try this method first.
Regards,
Psi
Those of you having trouble after a Rom Flash. If it goes wrong, start by pressing THE BACKLIGHT BUTTON, THE POWER BUTTON AND PRESS IN TO THE SOFT RESET HOLE ALL at the same time. This should put you back into BOOTLOADER. Then try your rom flash again. If the WM6 fails I re-flashed with the O2 EXEC WM5 first. Forget Active Synch saying it cant etc.
Providing you can just see some very faint words then you are back in bootloader. I have got the original O2 XDA EXEC WM5 Rom files so if you want them, as I can not find out how to put a large zip file on here then I can email it to you. Let me know on
[email protected]
pls i need it send to [email protected]

[Q] [Help][HTC TD P3700] Error 262

I am trying to flash my PDA with a new ROM, While working with HardSPL everything gonna alright, But during updating Radio or ROM i got a message Error with [ Error 262] unable to communicate, please help me
Error screen short attached
Try to flash when the phone is in bootloader mode
To enable bootloader mode hold volume down when the phone is off
or soft reset then hold volume down,you will see a tri-colour screen,that's normal
then connect to the pc and flash,this should solve
Hi, get the same Error.
Using the O2 XDA Diam300 HTC Touch Diamond Handy.
If got 20 (!) rom´s, no one runs on my Handy.
Anyone a idea?
xburnsidex said:
Hi, get the same Error.
Using the O2 XDA Diam300 HTC Touch Diamond Handy.
If got 20 (!) rom´s, no one runs on my Handy.
Anyone a idea?
Click to expand...
Click to collapse
you got HSPL installed, right?
How can watch it, if i got HSPL?
Okay... must install with mtty...
k
****
i´ve got a Brick... damn
how can i start the Ruu in the "tri-color" mode?
I think the RUU need the Active Sync..
Help...........
Problem resolved!
I've not any idea what happened but now i am able to flash my phone with any ROM. If i am not going wrong i think my phone was security restricted to install third party ROM, just HSPL with again and my problem resolved. Thank for support.
hold volume down and softreset! then with usb cable connected run the ruu file

htc 8s black screen later flash

Hello, I have a big problem I wanted to flash my htc with this method :http://forum.xda-developers.com/showthread.php?t=2094384
And at the end of the manip my telephone does not re-lay any more and stays with a black ecran...
please help me!!!
goudurisk said:
Hello, I have a big problem I wanted to flash my htc with this method :http://forum.xda-developers.com/showthread.php?t=2094384
And at the end of the manip my telephone does not re-lay any more and stays with a black ecran...
please help me!!!
Click to expand...
Click to collapse
Which verison of ROM you use RUS or EU, if RUS you may brick bootloader, try make HR or put device in service mode, if you successed puting your device in SM try again paste this files but on Windows 7 32bit, I tried on Windows 8 and flash files procedure doesn`t works and my device stay on service mode (racks) but on Windows 7 when I copied files all steps passed fine, but I used EU ROM
I have a similar problem.I tried to do debrand menu and after flash mobil do not work. Is still in black screen. Sometimes when i put in to charger the diod blinks (orange) hmmm 10-20second (is not problem with discarge the battery - it is fully charged). I flashed in this rom
- RUU_RIO_U_APO_00_HTC_Europe_1.04.401.03_1.11b.3054.25_10.13.30_RETAIL_ENC_RELEASE -
I did it already on other devices and everything was okay. Bat this time I did something wrong :
always i put on the memory card this file
UEFI_signed.nbh changing name to RIOUDIAG.nbh - and put into the memory FIRST - then i switching mobil on recovery (vol - , camera and switch on) the file was updated
then
RIOUDIAG.nbh - ROM - puting into the memory SECODN - then i switching mobil on recovery (vol - , camera and switch on) the file was updated
AND when I do on this method all will be ok BUT : )
I Flashed first rom file and my mobilephone is dead .... (I forgot that the first step is to update the UEFI file) and now The situation is such that the phone does not start. Windows "ZEUS flash device" and when i put in to charger the diod blinks (orange) hmmm 10-20second. Sorry for me english. Can anyone help me or direct what to do ? I do not want much to do j-tag. This is a new phone.
Hi
I can help U for 30 euro without sending taxes, U must send phone to me.
If someone interesting for details - email me.
Br
Shadowman
Hi I have the same problem, please anyone solve it? how?
Waiting for replay, thnaks.
Just dead
mourad_t said:
Hi I have the same problem, please anyone solve it? how?
Waiting for replay, thnaks.
Click to expand...
Click to collapse
I've same problem too. Nobody will solve it here then I'm sure. Whatever it was my secondary phone. I hate windows with hтс..
same problem here... no one can help us?
Have we got any news?
HTC 8S
Nazgul1379 said:
Have we got any news?
Click to expand...
Click to collapse
Any update on how to flash the rom?

Categories

Resources