Sac23 Roms
Hello guys this is something i want to try out
and see if u guys use if we get a good amount
of people in here ill keep making B roms
Join our telegram group
Sac23_Roms_Eyxnos_S20x
t.me
Changelog
Based off G988BXXSFHWB1
Deknoxed
Debloated
Optimized
Stock rom
Decrypted
Added CSC edits ( if u need edits added to your csc please send me a pm ill add )
Added magisk root
please make sure u are on newest version of the rom already
flash stock then flash twrp then wipe then flash this rom
Test Rom V1 - https://mega.nz/file/jIQi2CiK#_-akTu36McGeomyqo7Qmcpo5dQFKxBVgkk7_XINCD_8
one more
good luck.
Very little information, the firmware size is more than 5 gb, the archive is for ODIN, as I understand it. Give me more information.
What info do u need it's a Odin flashable flash in ap slot
Make sure u are on newest ROM stock then flash TWRP the wipe then reboot into download mode flash my rom in ap slot odin
Twrp recovery?
Yes TWRP recovery
sac23 said:
What info do u need it's a Odin flashable flash in ap slot
Click to expand...
Click to collapse
Are you sure that after installing the ROM, TWRP will remain in place?
Hi. It has dual sim option? I lost 2nd Physical sim option after update to OneUI 5.1. I want to use both physical sims.
As long as the csc u have supports it then yes try and let me know
sac23 said:
As long as the csc u have supports it then yes try and let me know
Click to expand...
Click to collapse
I have originally VAU CSC, it's G988B/DS, physical dual sims were working before updating to OneUI 5.1, after that only 1 sim physical ane 2nd is eSim, I tried to install OneUI 5.0 but on the setup screen dual sims work then suddenly change to 1 sim and 1 eSim. I changed the CSC but no luck. That's why I want to try a custom rom. Could you please help me?
So flash the newest firmware then go through setup wizard then open up settings do you have SIM manager in connections
Related
Hello
Just finished installing CM10.2 on my galaxy grand using
4.2-THL-CWM-Touch-6.0.3.6-Baffin-Odin for recovery (tanx to iceyhotguy & kenxda33 ),
cm-10.2-20131117-UNOFFICIAL-baffin, and
gapps-jb-20130813-signed.
CM 10.2 is truly amazing and beautiful, but
- only one sim is active, 2nd sim not activated
- can't access external SD card (tried mounting SD card, but doesn't work)
- can't receive a call or dial out, - phone reboots each time
Please is there a work around for fixing these issue?
Also, is there a way to get back to the stock 4.2.2?
Tanx
georgenibe
Hey guys
Just to add that my galaxy grand is unrooted.
Tanx.
georgenibe
georgenibe said:
Hello
Just finished installing CM10.2 on my galaxy grand using
4.2-THL-CWM-Touch-6.0.3.6-Baffin-Odin for recovery (tanx to iceyhotguy & kenxda33 ),
cm-10.2-20131117-UNOFFICIAL-baffin, and
gapps-jb-20130813-signed.
CM 10.2 is truly amazing and beautiful, but
- only one sim is active, 2nd sim not activated
- can't access external SD card (tried mounting SD card, but doesn't work)
- can't receive a call or dial out, - phone reboots each time
Please is there a work around for fixing these issue?
Also, is there a way to get back to the stock 4.2.2?
Tanx
georgenibe
Click to expand...
Click to collapse
First, if you are on CM10.2, your grand is not unrooted like you mentioned in post #2. Your phone was rooted when you completed flashing recovery and SuperSU
Secondly, CM10.2 is an under-development ROM, and currently supports only 1 SIM. And yes phone reboot is an issue they are trying to solve at the moment. It's only available so users can test and report back what's working in the new build and provide logcats so they look the problem.
The externalSD card issue has been solved in the recent builds already
To get back on stock you will need to flash the 4.2.2 firmware through Odin or flash any 4.2.2 stock-based ROM like GENNXT, RVR's stock based ROM or X-PeriaZ flavor through CWM recovery
If you flash your firmware again, you will have to repeat the recovery flashing method (this will have have to do done whenever you flashing any firmware through Odin)
GENNXT - http://forum.xda-developers.com/showthread.php?t=2196558
XperiaZ Flavor - http://forum.xda-developers.com/showthread.php?t=2304492
RVR - http://forum.xda-developers.com/showthread.php?t=2537603
Firmware - http://samsung-updates.com/device/?id=GT-I9082
EDIT : You can also simply flash Indian firmware September 09 version 4.2.2 I9082XXUBMI1 as a ROM from here : http://forum.xda-developers.com/showthread.php?t=2340562
abc
iceyhotguy said:
First, if you are on CM10.2, your grand is not unrooted like you mentioned in post #2. Your phone was rooted when you completed flashing recovery and SuperSU
Secondly, CM10.2 is an under-development ROM, and currently supports only 1 SIM. And yes phone reboot is an issue they are trying to solve at the moment. It's only available so users can test and report back what's working in the new build and provide logcats so they look the problem.
The externalSD card issue has been solved in the recent builds already
To get back on stock you will need to flash the 4.2.2 firmware through Odin or flash any 4.2.2 stock-based ROM like GENNXT, RVR's stock based ROM or X-PeriaZ flavor through CWM recovery
If you flash your firmware again, you will have to repeat the recovery flashing method (this will have have to do done whenever you flashing any firmware through Odin)
GENNXT - http://forum.xda-developers.com/showthread.php?t=2196558
XperiaZ Flavor - http://forum.xda-developers.com/showthread.php?t=2304492
RVR - http://forum.xda-developers.com/showthread.php?t=2537603
Firmware - http://samsung-updates.com/device/?id=GT-I9082
EDIT : You can also simply flash Indian firmware September 09 version 4.2.2 I9082XXUBMI1 as a ROM from here : http://forum.xda-developers.com/showthread.php?t=2340562
Click to expand...
Click to collapse
Hi iceyhotguy
Tanx for the info. Very helpful. I'll follow your suggestion. Please does GENNXT support dual sim?
I'll be on the lookout for when the dual sim issue is fixed in CyanogenMod.
Many tanx.
georgenibe
iceyhotguy said:
First, if you are on CM10.2, your grand is not unrooted like you mentioned in post #2. Your phone was rooted when you completed flashing recovery and SuperSU
Secondly, CM10.2 is an under-development ROM, and currently supports only 1 SIM. And yes phone reboot is an issue they are trying to solve at the moment. It's only available so users can test and report back what's working in the new build and provide logcats so they look the problem.
The externalSD card issue has been solved in the recent builds already
To get back on stock you will need to flash the 4.2.2 firmware through Odin or flash any 4.2.2 stock-based ROM like GENNXT, RVR's stock based ROM or X-PeriaZ flavor through CWM recovery
If you flash your firmware again, you will have to repeat the recovery flashing method (this will have have to do done whenever you flashing any firmware through Odin)
GENNXT - http://forum.xda-developers.com/showthread.php?t=2196558
XperiaZ Flavor - http://forum.xda-developers.com/showthread.php?t=2304492
RVR - http://forum.xda-developers.com/showthread.php?t=2537603
Firmware - http://samsung-updates.com/device/?id=GT-I9082
EDIT : You can also simply flash Indian firmware September 09 version 4.2.2 I9082XXUBMI1 as a ROM from here : http://forum.xda-developers.com/showthread.php?t=2340562
Click to expand...
Click to collapse
Oh!
Just to add that I did only the flashing recovery on my grand, but didn't run SuperSU.
Cheers.
georgenibe
georgenibe said:
Hi iceyhotguy
Tanx for the info. Very helpful. I'll follow your suggestion. Please does GENNXT support dual sim?
I'll be on the lookout for when the dual sim issue is fixed in CyanogenMod.
Many tanx.
georgenibe
Click to expand...
Click to collapse
Yes all three mentioned above are stock based and support dual SIM including GENNXT. Usually all stock based ROMs support dual SIM
This rom is not fully stable .....
Sent from my GT-I9082 using XDA Premium 4 mobile app
Post GENNXT_J4 Installation: language NOT English
iceyhotguy said:
Yes all three mentioned above are stock based and support dual SIM including GENNXT. Usually all stock based ROMs support dual SIM
Click to expand...
Click to collapse
Hello guys
Post installing GENNXT_J4, the phone language on reboot was NOT English.
Flashed Update-SuperSU -1.65 to root
Installed GENNXT_J4,
Installed gapps-jb-20130301
Installation was successful
Not sure why the language on reboot is NOT English
georgenibe
GENNXT_J4 Installation
georgenibe said:
Hello guys
Post installing GENNXT_J4, the phone language on reboot was NOT English.
Flashed Update-SuperSU -1.65 to root
Installed GENNXT_J4,
Installed gapps-jb-20130301
Installation was successful
Not sure why the language on reboot is NOT English
georgenibe
Click to expand...
Click to collapse
Hey guys
PLEASE ignore my last post.
I have selected the English language. So, all's good. Apologies.
georgenibe
Hi,
I just installed 3 different roms on my phone and none of them works fine.
I installed:
1. dr.krtans rom from here: http://forum.xda-developers.com/showthread.php?t=2472270
2. [MK4]DN3(Ditto Note 3) ROM http://forum.xda-developers.com/showthread.php?t=2502713
3. [Rom][Odin][4.3] N7100XXUEMK4 Knox Free - Non-Wipe
After every installation my phone has no network (e.g. it does not recognize my carrier).
I have no idea what to do. PLEASE PLEASE HELP me out here...
i'm running on doc v6.1 it's working great
maybe you would like to try other older modem to see if it support your area.
in Dr. Ketan's rom you get to choose whether you want to use MJ5 or MJ9 modem
if it still doesn't show any network. try the fix. doc have a link in the front page for that issue
do you have stock modem files backup? if yes just flash it
I flashed OmniRom and had the same problem as you, but I fixed it by rebooting my phone, reinserting my simcard and leaving my phone idle for a few minutes(probably 30 mins or so) and the carrier was recognized. Maybe this might help you.
what link
is3ng said:
i'm running on doc v6.1 it's working great
maybe you would like to try other older modem to see if it support your area.
in Dr. Ketan's rom you get to choose whether you want to use MJ5 or MJ9 modem
if it still doesn't show any network. try the fix. doc have a link in the front page for that issue
Click to expand...
Click to collapse
I didn't find any link for this problem... can you please add the link here ?
Just install the patched kernel and bootloader from below links. Flash them via cwm. I found these on xda but I really do not remember who made this. So credits go to who made this
https://www.dropbox.com/s/4puowqjwjpiw2so/Patched_N7100_MK4_KERNEL.zip
https://www.dropbox.com/s/nko9oq989g59k2g/Patched_N7100_XXUEMJ5_Modem.zip
Check out this thread http://forum.xda-developers.com/showthread.php?t=2538608
Hy guys, I'm trying to make a patch (from grola v2 ls980 patch and zvg update) that can made every stock based Lollipop rom work on LS980 sprint G2.
I tested it on G2PRO2 v5 port and on Grola/simple rom and it works without the signal drops that other patchs have.
Tested on CloudyG2 3.1 and it boot and seem stable [couple of hours now].
Now cloudy made his own patch so use it not mine.
------------------------------------------------------------------------------------------------------------------------------------
Now the baseband is properly displayed, not unknown.
I'm not responsable of brick, phone explosion, sexually transmitted infections, etc.
Installation
0 do a backup
1 you must be on a bumped TWRP
2 flash kk bootloader
3 reboot recovery
4 wipe
5 flash your choosed LP rom
6 DON'T REBOOT
7 flash the patch
8 flash again your twrp recovery
9 reboot
10 enjoy the rom (especially cloudy's one)
Changelog in post 2
Bugs in post 3
Download link in post 4
Thanks to the original v2 grola patch developer and to LG and Sprint.
Changelog
Changelog
V 1.0
Initial release
V1.1
Deleted
V1.2
Added all the needed system files
Removed recovery.img
Known bug
The back notification led is allways on in GPRO2 rom.
Download link
V 1.0
https://mega.co.nz/#!0p1FkKBB!k1g8_lU_2sznybaG1mkH1bdJLGcjm1zcjQyT3qBSs8o
V1.1
V1.2
https://mega.co.nz/#!lgEjAawK!GRQyW0scteNZ54gFn2YxY2oglcRkJCox9j-s8zdC1B8
ZVE BOOTLOADER
https://mega.co.nz/#!o59iAC6J!DhhmN4krLZkqhoo6g2SDRn9gW3sgg_-Vih9ryxqGXwM
so we can use any d802 rom on ls980 now? or is it just for simple rom
I have tried simple (korean) and GPRO2 v5 final (d802) and them works. So in theory this patch can made every LP stock based rom LS980 compatible.
_____________________________________Read more write less and be smart
Nice Job ! Any way I can help ?
gaurangbhartia said:
Nice Job ! Any way I can help ?
Click to expand...
Click to collapse
Thank you! If you want you can test the patch on some roms and give me feedbacks. I want to understand the differences in gps and led between the variants, so we can fix everything on every rom.
_____________________________________Read more write less and be smart
So this is ls980 boot loader for zve. I believe I can find the right commands to pull laf partition and kernel to bump. So we can get TWRP on the LS980 or at least I understand that is the necessity.
siggey said:
Thank you! If you want you can test the patch on some roms and give me feedbacks. I want to understand the differences in gps and led between the variants, so we can fix everything on every rom.
_____________________________________Read more write less and be smart
Click to expand...
Click to collapse
Will do...Let me know which rom you want me to test it on .. Shall I try it on Cloudy's Lollipop rom ?
Btw did you try renaming the product/model lines in the build.prop, to ls980,if not the roms will use the specified d805 or w/e propietary blobs. im not to sure if the lg g2's gps modules are cross compatible with the different models. But i would try this, this way it uses our propietary blobs that you included in patch(system/lib/modules). btw the recovery.img you included in the patch is that the stock recovery, or twrp bumped?
siulmagic said:
Btw did you try renaming the product/model lines in the build.prop, to ls980,if not the roms will use the specified d805 or w/e propietary blobs. im not to sure if the lg g2's gps modules are cross compatible with the different models. But i would try this, this way it uses our propietary blobs that you included in patch(system/lib/modules). btw the recovery.img you included in the patch is that the stock recovery, or twrp bumped?
Click to expand...
Click to collapse
Same goes with nfc. ls980 uses an entirely different chip then the other models.
gaurangbhartia said:
Will do...Let me know which rom you want me to test it on .. Shall I try it on Cloudy's Lollipop rom ?
Click to expand...
Click to collapse
Yesssssssss
_____________________________________Read more write less and be smart
siulmagic said:
Btw did you try renaming the product/model lines in the build.prop, to ls980,if not the roms will use the specified d805 or w/e propietary blobs. im not to sure if the lg g2's gps modules are cross compatible with the different models. But i would try this, this way it uses our propietary blobs that you included in patch(system/lib/modules). btw the recovery.img you included in the patch is that the stock recovery, or twrp bumped?
Click to expand...
Click to collapse
Bumped
_____________________________________Read more write less and be smart
tabp0le said:
Same goes with nfc. ls980 uses an entirely different chip then the other models.
Click to expand...
Click to collapse
hey have u sim unlocked in ZVG? or r u using sprint network?
kadadan said:
hey have u sim unlocked in ZVG? or r u using sprint network?
Click to expand...
Click to collapse
I'm on Sprint.
siggey said:
Yesssssssss
_____________________________________Read more write less and be smart
Click to expand...
Click to collapse
Tried it... The rom itself doesnt flash properly. I think this is incompatible version due to cloudy's scripts. End Result : System & Data deleted and the phone reboots back to recovery.
imho, we need to update the original zip made by cloudy for his rom.
Do you think it'll work if i use your patch, flash a rom based on official lp for d802, and use the bluecyclon kernel?
zach_95 said:
Do you think it'll work if i use your patch, flash a rom based on official lp for d802, and use the bluecyclon kernel?
Click to expand...
Click to collapse
I think not, if I remember well is a d802 kernel, you need an ls980 kernel.
_____________________________________Read more write less and be smart
gaurangbhartia said:
Tried it... The rom itself doesnt flash properly. I think this is incompatible version due to cloudy's scripts. End Result : System & Data deleted and the phone reboots back to recovery.
imho, we need to update the original zip made by cloudy for his rom.
Click to expand...
Click to collapse
Are you sure that the rom is downloaded property? Md5 ok? Some time ago I tried flash it with another patch, and except big signal drop issues the rom works. Now I cant but when is possible I download it and try by myself.
_____________________________________Read more write less and be smart
This is a purestock ROM of the official android 7.0 release. Not any modifications or app removals has been made, it also isn't rooted (you can flash SuperSU if you want). This rom has the bootloader, modem, kernel and all the system files from the DPLT build. This is only for G930F! This rom feels extremely smooth and stable.
Before Download please make sure that am not responsible if anything happens to your device.
Since I have a G935F I'm not able to test this ROM on G930F but it should work. Please let me know if not.
DOWNLOAD:
https://drive.google.com/file/d/0B4ZWp6etwAPeR2FXckRVMlV1clk/view?usp=sharing
INSTALL:
Just flash it with TWRP
Reserved 1
Reserved 2
Thanks for the upload pal. I'll give it a try tonight!!
Wich is default csc here?
Thanks a lot for that, man. Its always good to have a stock flashable ROM.
Tested on G930FD
Resuilt: Failed.
Error: symlinks failed.
confirmdnt said:
Tested on G930FD
Resuilt: Failed.
Error: symlinks failed.
Click to expand...
Click to collapse
I have a G930F
Same result as you.
no luck on w8 , got it to install just booted back to twrp
i rebulid rom stock deodex DPLT . everyone test
link f930F: https://drive.google.com/open?id=0B8w7700fZlaXYTBVaXRkTVRxQW8.
very flash after people reported i
I can flash the ROM, but the touchscreen does not respond and the whole screen is blue.
I recommend going on SAMmobile.com and downloading it from there. I can provide a link to a video tutorial if needed. It uses Odin but works perfectly. I am using it now.
i have one question, it is not reffered to topic exactly but i dont know how to flash stock firmware on S7..
i had S5 and S6 and when downloaded firmware and extract zip folder it was normally for example G920FXXU3COI9_G920FBTU3COJ1_G920FXXU3COI9_HOME.tar which wash flashed to AP/PDA field.
but now i downloaded stock france 7.0 for S7 and when unpack rar, there are 5 files.. which to flash?
AP_G930FXXU1DQC4_CL10422490_QB12768203_REV00_user_low_ship_meta.tar 4.2 gb
BL_G930FXXU1DQC4_CL10422490_QB12768203_REV00_user_low_ship.tar 5 mb
CP_G930FXXU1DQC2_CL443934_QB5909108_SIGNED.tar 44 mb
CSC_XEF_G930FXEF1DQC1_CL10422490_QB12750166_REV00_user_low_ship.tar 21 mb
HOME_CSC_XEF_G930FXEF1DQC1_CL10422490_QB12750166_REV00_user_low_ship.tar 21 mb
thanks.
tinko975 said:
i have one question, it is not reffered to topic exactly but i dont know how to flash stock firmware on S7..
i had S5 and S6 and when downloaded firmware and extract zip folder it was normally for example G920FXXU3COI9_G920FBTU3COJ1_G920FXXU3COI9_HOME.tar which wash flashed to AP/PDA field.
but now i downloaded stock france 7.0 for S7 and when unpack rar, there are 5 files.. which to flash?
AP_G930FXXU1DQC4_CL10422490_QB12768203_REV00_user_low_ship_meta.tar 4.2 gb
BL_G930FXXU1DQC4_CL10422490_QB12768203_REV00_user_low_ship.tar 5 mb
CP_G930FXXU1DQC2_CL443934_QB5909108_SIGNED.tar 44 mb
CSC_XEF_G930FXEF1DQC1_CL10422490_QB12750166_REV00_user_low_ship.tar 21 mb
HOME_CSC_XEF_G930FXEF1DQC1_CL10422490_QB12750166_REV00_user_low_ship.tar 21 mb
thanks.
Click to expand...
Click to collapse
Using Odin every tar is his related part. (AP in AP... BL in BL and so on)
Hey guys, will this work on the samsung galaxy nexus, model GT-I9250M? I've been trying to find a stock android 7 rom for it, and this is the closest thing I can find. Thanks!
mkalter said:
This is a purestock ROM of the official android 7.0 release. Not any modifications or app removals has been made, it also isn't rooted (you can flash SuperSU if you want). This rom has the bootloader, modem, kernel and all the system files from the DPLT build. This is only for G930F! This rom feels extremely smooth and stable.
Before Download please make sure that am not responsible if anything happens to your device.
Since I have a G935F I'm not able to test this ROM on G930F but it should work. Please let me know if not.
DOWNLOAD:
https://drive.google.com/file/d/0B4ZWp6etwAPeR2FXckRVMlV1clk/view?usp=sharing
INSTALL:
Just flash it with TWRP
Click to expand...
Click to collapse
hey bro the link doesnt work can you reupload?
hello,
I made this TWRP flashable zip from December ARK4 Samsung firmware, using SuperRKitchen. It's deKnoxed and untouched apart from the lightest of debloated apps. Everything else is untouched and as per Samsung firmware. No root is included or any other mods or additions. I made this for myself, but offer it here for any interested parties. I'm not a dev, script warrior or ROM master. Just a guy with a T835. I was already on ARK4, but I include the ARK4 vendor image if you need to flash in twrp. It's v4 as it took me 3 attempts to make it! You just need to flash Magisk and/or Modesty Kernel if you want.
ROM - https://drive.google.com/open?id=14CokHkIahzI_Rk3OR2TgErqy8bgVF9br
ARK4 Vendor image: https://drive.google.com/open?id=1dgV-KDBZw7EeCnWcHozR-vx4oKdNG7Ee
Modesty Kernel: https://forum.xda-developers.com/galaxy-tab-s4/development/kernel-modesty-0-99-4-t3856088
Magisk: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
I don't get my tab s4 until tomorrow, but I'd like to thank you for making this. I know I'll end up using this when I inevitably screw up using one of the roots or debloats.
simcop2387 said:
I don't get my tab s4 until tomorrow, but I'd like to thank you for making this. I know I'll end up using this when I inevitably screw up using one of the roots or debloats.
Click to expand...
Click to collapse
You're welcome. It's a great tablet. My first Samsung device after nexus' - very impressed with this tab
do You think this will work on a 830 and :
could you give step by step how to install it.
thanks
marvinc said:
do You think this will work on a 830 and :
could you give step by step how to install it.
thanks
Click to expand...
Click to collapse
I'm not sure - but would think it doesn't. You can try though, just back up before you do and restore if not
To flash ROM you'll need TWRP installed. https://forum.xda-developers.com/ga.../recovery-twrp-3-2-3-1-galaxy-tab-s4-t3843211.
Once TWRP is installed and working, wipe system, data etc
Then flash the ROM zip
Flash kernel & Magisk if you require
Thank you OP! Can you please help me understand, what does deknoxed mean? I know Knox is Samsung security, but what would deknoxed be? Less bloat or some functional advantage?
Removing the knox app that may inhibit root manger or interfering with system apps. It
Thank you for your efforts. Having rooted I had a rigmarole to go thru to apply this update. It was so easy, just flashed with TWRP and I still had root, TWRP, and all my apps data and settings.
I hope that you will do the same for further firmware updates as they come out.
Again thanks for your efforts!
Are you doing Pie version as well?
THanks
Sure, as soon as the sammobile site as th UK firmware I'll dig one out
There is one for Hong Kong and one Unknown. Are you able to provide some basic instructions on how to brew the custom firmware please?
Thanks
All links are not working. Does anybody have mirror on this ROM or another ROM based on Android 8 for TWRP?