Related
REMEMBER THIS IS A SNAPSHOT BUILD, THAT MEANS THE APK IS BUILT AS SOON AS CHANGES ARE PUSHED FROM THE MASTER HIMSELF @chenxiaolong
I'm proud to present the first dual boot project for the Qualcomm-based Samsung Galaxy S4! This project started off as a feature in my ROM, but not anymore. This will allow any two ROMs (soon, three) to be installed at the same time. It works by patching the secondary ROM's installation scripts and boot image to load the ROM files from an alternate location (/system/dual, /cache/dual, and /data/dual). Because of the way this is implemented, no changes to the primary ROM are necessary
Click to expand...
Click to collapse
By @chenxiaolong
Tested Personally myself @ktetreault14 with the G920T Xtresolite 5.0.2 ROM (found here) as my primary rom. I then used @eousphoros 5.1.1 Debloated V2 ROM (found here) as my secondary. I even have a Sprint OE2 rom I was testing in a third slot. You might wonder how this is possible. All thanks to chenxiaolong's brilliant multibooting system. He has now added in the ability to install roms straight from your /data partition All without touching your primary rom. You could be stock rooted and have no problems as long as it isn't aroma. (In which case I think you could alwasys use flashfire) The S6 Edge didnt have a very large /system partition (only 4.05 gb ) and /cache was nothing to brag about either (for those inquiring minds it is 304.7mb) So naturally I asked the amazing quick chen if there was any way I could Install it to my ~25gb /data partition, within days he whipped something up... But enough with the story get on with the tutorial and show me the downloads... Ok Fine.. Here. We. Go!!!!!!!!!!!! :fingers-crossed:
TUTORIAL AND PICS AND VIDEOS
I'm Assuming you have the apk downloaded and installed. Also you have the rom and, if you need it, the kernel already downloaded on placed on your phone's memory.
Step 1| Open the apk, Swipe right from left edge, Patch Zip File.
Step 2| That is obvioulsy not your phone so lets change that. Click jflte and select zerolte in the dropdown. (BTW all those other phones are supported too.)
Step 3| Change where you would like it to install too. (Most likely going to be /data unless the roms are heavily debloated or AOSP) For the purposes of this tutorial it is going to /data
Step 4| Name your ROM. Pick Your ROM.
Step 5| Ignore The Information Here, Scroll down, Tap to begin patching. Do as many times as you would like
Step 6| Open hamburger menu, ROMs, click the FAB (Floating Action Button), click +, pick patched rom.
Step 7| Keep Installation Location or change if you are not sure. Do as with many zips you would like to install.
Step 8| Click checkmark in top left corner.
Step 9| Reboot and you will boot up into new rom
IF YOU WOULD LIKE TO SWITCH ROMS
Step 1. Open App
Step 2. Click ROMs
Step 3. Click Rom you want to boot to
Step 4. Reboot
Dual-Boot Patcher Thread
DISCLAIMER: We are not responsible for any issues, problems, or broken phones, which may have come from using any data or information you receive from this thread. Using anything here, will most likely violate your cell phone's warranty or contract. That is also your 100% responsibility, to know, and your responsibilty if you do. If you don't know what you are doing, or you think you do, and you brick your phone, or something POSITIVE OR NEGATIVE changes with your phone, it is all 100% your responsibility. Use the following data, information, and links at YOUR OWN RISK!
SNAPSHOT BUILDS
HERE @chenxiaolong
Dual-Boot Switcher.zip Alpha
USE THIS TO SWITCH BETWEEN ROMS IN RECOVERY
Get The Latest Version In Chen's Thread
CREDITS
@chenxiaolong - He is the maker and current maintainer
Thanks for making this thread!
PSA
If you are on tge unrooted 5.1.1 rom, after you patch the zip just flash from recovery.
ktetreault14 said:
No problem I need to get the word out. Lol
Click to expand...
Click to collapse
If I'm running the eousphoros 5.1.1 Debloated V2 ROM as my primary, I would need to start over, correct? (since this ROM doesn't have root and has stock recovery)
whittikins said:
If I'm running the eousphoros 5.1.1 Debloated V2 ROM as my primary, I would need to start over, correct? (since this ROM doesn't have root and has stock recovery)
Click to expand...
Click to collapse
Nope. You only need root for the app if you want to flash in-app. Just patch rom and install from recovery
Nice Thread
Thanks for usefull thread
No problem. It's even another now
I couldn't get the 5.1.1 ROM to work. It says it's unsupported and fails to flash.
Sent from my SM-G925T using Tapatalk
Hopefully we get more Roms options soon, loved this on my S3 switching between 2 different setups, currently we have what, one Rom 5.02 and a stock 5.1.1 without root?
Sent from my SM-G925T using XDA Free mobile app
Yes I agree thanks for making this thread!
App sharing problem
I didn't check the box that it says to check if you want to share info from one partition to another but it is sharing. How do I stop that? I want to have one ROM for work and one for personal without the info of pics crossing over.
s6 edge?
This is posted in the tmobile s6 edge forum but you only mention using this with the s4. Is this actually usable on the s6 edge? I checked the threads of chenxiaolong from post #1 but I only saw reference to the s4 in his threads as well.
I'd like to dual boot my phone but this thread doesn't make me believe it works for us s6 edge users.
Yeah using it noe
It seems arter kernel not supported.
eweo911 said:
This is posted in the tmobile s6 edge forum but you only mention using this with the s4. Is this actually usable on the s6 edge? I checked the threads of chenxiaolong from post #1 but I only saw reference to the s4 in his threads as well.
I'd like to dual boot my phone but this thread doesn't make me believe it works for us s6 edge users.
Click to expand...
Click to collapse
Jsut need to know if this is currently working for S6 Edge
I have the g920 flat s6t and haven't have any issues duel booting. Always had Sickness roms as my primary and with all his versions i had no issues with duel boot but now in his latest v9 built i am unable to duel boot. When i reboot secondary rom it stays at samsung boot logo, it does not go into recovery. When i flash the utility zip to switch to primary rom it boot loops and goes to recovery and none of the roms boots..so i reflashed sick as hell v7 and its duel booting good. The rom developer told me he have no change anything from v7 to v9 he just added some tweaks and xtra apps, don't understand why is not duel booting with latest rom. I did flashed the log file. I will attach it.
I have tried several times but I'm not able to install xposed framework. my last attempt lead my sm-t705 to a bootloop, can anyone explain the steps here? I'm using tw 5.0.2, rooted, twrp recovery, up in the air 1.7 kernel.
Make sure your rom is deodexed then Install this zip via twrp:
http://forum.xda-developers.com/attachment.php?attachmentid=3388977&d=1435913710
Then install the Alpha 4 apk:
http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
That's it, reboot and you should have xposed.
ashyx said:
Make sure your rom is deodexed then Install this zip via twrp:
http://forum.xda-developers.com/attachment.php?attachmentid=3388977&d=1435913710
Then install the Alpha 4 apk:
http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
That's it, reboot and you should have xposed.
Click to expand...
Click to collapse
thanks ashyxs, my rom is not deodexed, so it was the problem in my previous attempts.
now, how shoud I deodex my rom? Its the official rom from samsung and I don't want to use custom.
thanks again
amirz2ir said:
thanks ashyxs, my rom is not deodexed, so it was the problem in my previous attempts.
now, how shoud I deodex my rom? Its the official rom from samsung and I don't want to use custom.
thanks again
Click to expand...
Click to collapse
What you said doesn't make sense, if you modify a stock rom it becomes custom.
If you root, deodex and install xposed then your stock rom becomes custom.
You need to do all 3 to make it work.
I would suggest saving yourself some hassle and installing the rom below, it is practically a stock lollipop rom, which is deodexed and rooted. All you need do is install xposed.
https://mega.nz/#!E58E1RSR!UMzKgt382bO32s_Qvso5fW445aI3_8EemkVuFK4hXRo
ashyx said:
I would suggest saving yourself some hassle and installing the rom below, it is practically a stock lollipop rom, which is deodexed and rooted. All you need do is install xposed.
Click to expand...
Click to collapse
thanks Ashyx,
what I meant by costume rom was that I want a clean rom with out any unnecessary modifications.
who is the developer of this rom? I've never seen this rom before except for t800.
amirz2ir said:
thanks Ashyx,
what I meant by costume rom was that I want a clean rom with out any unnecessary modifications.
who is the developer of this rom? I've never seen this rom before except for t800.
Click to expand...
Click to collapse
Developer is not-i called sweetrom. Its a very good stable rom, hardly anything removed except for a few bloat apps.
@ashyx I am trying to get xposed on T800, do the files you attached work too or should I get something else? Can you refer me to the xposed thread you're getting the files from? I have xposed on my OPO with Blisspop but trying to get it on a Tab S T800.
vurtomatic said:
@ashyx I am trying to get xposed on T800, do the files you attached work too or should I get something else? Can you refer me to the xposed thread you're getting the files from? I have xposed on my OPO with Blisspop but trying to get it on a Tab S T800.
Click to expand...
Click to collapse
http://forum.xda-developers.com/xpo...g-lollipop-t3113463/post60857320#post60857320
I know this is an old thread but I need some help. I'm on the latest version of stock TouchWiz and I've gone through the deodexing process but I still cannot get Xposed installed. It sticks at the Samsung boot animation after flashing any and all zip files that TWRP allows me to flash.
noxarcana said:
I know this is an old thread but I need some help. I'm on the latest version of stock TouchWiz and I've gone through the deodexing process but I still cannot get Xposed installed. It sticks at the Samsung boot animation after flashing any and all zip files that TWRP allows me to flash.
Click to expand...
Click to collapse
You need to flash the latest arter97 build.
Does it boot after deodexing without xposed?
ashyx said:
You need to flash the latest arter97 build.
Does it boot after deodexing without xposed?
Click to expand...
Click to collapse
I've flashed every version of arter97's builds that said sdk21. I'll try again, and yes, it's booting just fine deodexed.
EDIT: "As far as my testing goes, only the Korean Note 3 firmwares should install "requestConcurrentGC" version." Because of that line there, I never tried flashing that particular version. Until now. It worked and finally booted up completely except no modules are showing up in the downloads section.
EDIT 2: Simply reinstalled the Xposed apk and the download section was populated.
Sent from my SM-T700 using Tapatalk
Today when I flashed a zip on stock, deodexed ROM in Flashfire my SM-T700 get bootlop another time... :/ I don't want to trip a KNOX flag.. any ideas?
noxarcana said:
I've flashed every version of arter97's builds that said sdk21. I'll try again, and yes, it's booting just fine deodexed.
EDIT: "As far as my testing goes, only the Korean Note 3 firmwares should install "requestConcurrentGC" version." Because of that line there, I never tried flashing that particular version. Until now. It worked and finally booted up completely except no modules are showing up in the downloads section.
EDIT 2: Simply reinstalled the Xposed apk and the download section was populated.
Sent from my SM-T700 using Tapatalk
Click to expand...
Click to collapse
Pretty much all Samsung devices running LL use the requestConcurrentGC version.
The latest versions will do a device check before installing anyway.
ashyx said:
Make sure your rom is deodexed then Install this zip via twrp:
http://forum.xda-developers.com/attachment.php?attachmentid=3388977&d=1435913710
Then install the Alpha 4 apk:
http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
That's it, reboot and you should have xposed.
Click to expand...
Click to collapse
Would you happen to know the framework/APK I need for a Tab A T350 on 5.0 SDK21 ARM downloaded and tried what i thought was correct missed the section about samsung stock roms and bootloop luckly i put the uninstaller and was able to get back to twrp
you mentioned to make sure the rom is deodexed? lost there...is that something that needs to be done on stock rom?
Thanks
Denverfan9 said:
Would you happen to know the framework/APK I need for a Tab A T350 on 5.0 SDK21 ARM downloaded and tried what i thought was correct missed the section about samsung stock roms and bootloop luckly i put the uninstaller and was able to get back to twrp
you mentioned to make sure the rom is deodexed? lost there...is that something that needs to be done on stock rom?
Thanks
Click to expand...
Click to collapse
Why don't you update it to mm then install wanam xposed build. Saves all the hassle of deodex ing.
ashyx said:
Why don't you update it to mm then install wanam xposed build. Saves all the hassle of deodex ing.
Click to expand...
Click to collapse
there is no 5.1/6.0 stock rom for T807.
How to deodex 5.0.2 rom? is there a tutorial?
thanks.
radwaste said:
there is no 5.1/6.0 stock rom for T807.
How to deodex 5.0.2 rom? is there a tutorial?
thanks.
Click to expand...
Click to collapse
You can save yourself some hassle there are some great deodexed roms in the development section.
If you still want Xposed for stock check out the Arter97 thread for the latest modified Xposed. It has been patched to no longer require deodexing.
ashyx said:
You can save yourself some hassle there are some great deodexed roms in the development section.
If you still want Xposed for stock check out the Arter97 thread for the latest modified Xposed. It has been patched to no longer require deodexing.
Click to expand...
Click to collapse
Thanks. I saw arter97's thread.
but in the first post, the quote is emphasized. I am note sure someone try it on odexed stock rom.
/* Prerequisite */
Due to my skills limitation, only deodex'ed ROMs are supported for now.
For more explanations, checkout post 2.
/* Supported firmwares */
Every ARMv7(32-bit) Samsung Lollipop Android 5.0 deodex'ed firmware should work.
But please note that I have tested this only on Galaxy S4, Note 3 and S5.
Click to expand...
Click to collapse
Read on to the recent posts there's been development since then.
http://forum.xda-developers.com/gra...posed-stock-lollipop-5-0-2-to-deodex-t3391599
This ia ancient news, I think exposed killed my knox?, I thought it said it could not install because if it, it asked me if i wanted to disable knox so it could install, I said yes and knox was killed, this was over a year ago and i was on kitkat, is this correct.
Killing knox was the best thing for me once i realised it, no more worrying about killing it any-more, my 2 year warranty is almost out, and i have had no problems with my T800 10.5"
John.
I know mastergrillo already has a thread similar to this, but I didn't see an option that had everything I wanted. I'm just sharing the version I made for myself in case anyone needs it. Flash at your own risk.
This is simply a stock Samsung Lollipop 5.0 rom (N900TUVUFOB6) for the T-Mobile Galaxy Note 3 (N900T) that includes the following features:
Features:
Rooted (SuperSU and Busybox included)
KNOX removed (it will still trip KNOX 0x1, but it won't annoy you about a security issue)
Deodexed (makes the system easier to MOD and is currently required for installing the Xposed framework)
Zipaligned (optimizes apk alignment to reduce memory usage)
Rom based /etc/init.d script support (doesn't require a kernel with init.d support, but it will still work fine if your kernel does [scripts shouldn't get run twice])
Untouched stock Samsung kernel
It was not debloated because what's bloat to me may be useful to someone else and vice versa. You can easily debloat it yourself using Titanium Backup or a debloating script.
Nothing else was touched, and all T-Mobile based features like wifi calling work fine.
Issues:
No issues that I know of.
Installation instructions
Note: This rom does not include the lollipop bootloader or modem, so it's recommended to update both of those first if you haven't already.
Do a full backup
Flash with TWRP recovery (other custom recoveries may work, but it hasn't been tested)
Wipe dalvik cache, system, data, and cache partitions before installing. You probably don't have to wipe the data partition if you're coming from the original Samsung Lollipop 5.0 (this will preserve your apps and settings), but I haven't tested it.
May take 10 to 20 minutes for first boot (it will stay on the t-mobile logo for a while). Just be patient.
Stagefright vulnerability fix
There's a patch available to fix the stagefright vulnerabilities (credit goes to mastergrillo for this). The patch can be installed with TWRP immediately after installing the rom (you don't need to reboot first).
Other MODs that are compatible with this ROM (not included)
External sdcard write fix (allows apps to write to the external sdcard)
Android 6.0 Marshmallow boot animation (here's a video of what it looks like)
Xposed framework
Note: Xposed is still in alpha status for Lollipop, so some modules may still have issues.
First install XposedInstaller_3.0_alpha4.apk (or newer) from here
And then flash xposed-v75-sdk21-arm-arter97-snapdragon.zip (or newer) from here using TWRP. The important parts of the filename that should stay the same are "sdk21" (for Lollipop 5.0.x) and "snapdragon" (for our chipset).
If you have any questions or issues with Xposed, please ask them in arter97's Xposed thread.
Download ROM
XDA:DevDB Information
N900TUVUFOB6-frequentc, ROM for the T-Mobile Samsung Galaxy Note 3
Contributors
frequentc
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2015-10-02
Created 2015-10-01
Last Updated 2015-11-17
Reserved
1st yes
Downloading now.
I'm a fan of straight stock look. I'll came back with any more input.
Xposed is a new idea with lollipop but I'll give it a go.
Thanks!
BOOM, shalakalaka
dirtybudha said:
Downloading now.
I'm a fan of straight stock look. I'll came back with any more input.
Xposed is a new idea with lollipop but I'll give it a go.
Thanks!
BOOM, shalakalaka
Click to expand...
Click to collapse
Here's arter97's version of xposed that will work with Samsung deodexed touchwiz roms: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
You tha man!
I followed the link in the OP, thanks.
frequentc said:
Here's arter97's version of xposed that will work with Samsung deodexed touchwiz roms: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
Click to expand...
Click to collapse
UPDATE: I seem to got be getting data after installation. I've installed twice. I cannot just say this is bogus, but I'm just sharing that I can't get data with this ROM in the OP.
dirtybudha said:
UPDATE: I seem to [not] be getting data after installation. I've installed twice. I cannot just say this is bogus, but I'l just sharing that I can't get data with this ROM in the OP.
Click to expand...
Click to collapse
@dirtybudha
The data service problem has been fixed in version 1.1 (OP updated with link).
The bug happened because I forgot to include the CSC files from the original Samsung rom. I didn't notice the bug because I manually flashed the CSC files after flashing the rom, which fixed the problem for me.
Anyways, I reflashed the new version myself using the flashing instructions in the OP to verify that it was corrected. It should work fine now.
..
Thanks! Will flash and report back.
Update: Data works! Bluetooth won't turn on. I'm sending a pm with a logcat.
BOOM, shalakalaka
dirtybudha said:
Update: Data works! Bluetooth won't turn on. I'm sending a pm with a logcat.
Click to expand...
Click to collapse
Hey, I just tested bluetooth on my phone, but I can't replicate your problem. It's working fine for me. You may want to try clearing the caches if you haven't already. I did a full wipe (system, data, cache, and dalvik cache) when flashing version 1.1.
How did you flash version 1.1? Was it a clean install? Can you please tell me what you wiped? Have you tried this bluetooth device on the stock lollipop before?
If anyone else has tried bluetooth, please post your results.
Thanks
And can you please tell me the device you tried to pair with the phone, or would bluetooth just not turn on at all when you tried to enable it?
Edit:
btw.. are you running the lollipop bootloader and modem?
It was a clean install, wiped caches, data, system. I do this ever time i flag a ROM. I do have the bootloader and modem for Lollipop. I'm currently running stock Lollipop,and have been for a while.
I was trying to pair my Asus Zenwatch. Problem is that the Bluetooth Jay wouldn't turn on at all.
Let me try again. Could have been a bad a download or the moon wasn't in the right place last night.
Update: it was a bad download, apparently. Seems like everything is working so far.
About to backup everything and flash Xposed.
BOOM, shalakalaka
I've actually been looking for exactly this. Being that it is bone stock is it safe to assume that Wifi calling and everything else works?
If you read through the OP you will see that this ROM is almost entirely stock for the T-Mobile Note 3. That means WiFi Calling works. I just turned it on and everything is in order.
RelayTech said:
I've actually been looking for exactly this. Being that it is bone stock is it safe to assume that Wifi calling and everything else works?
Click to expand...
Click to collapse
Xposed took some thinking, all anyone needs to do is flash the Alpha 4 file. So far it shows that it is up and running. Although my multi window manager wasn't able to work, it may not be compatible with lollipop. I'll have to go through and test some of the apps later. I just left the FC Dallas soccer game and I'm headed home to watch the Dallas Cowboys play.
Great work! I, as well as the community, appreciate your contribution.
BOOM, shalakalaka
dirtybudha said:
Xposed took some thinking, all anyone needs to do is flash the Alpha 4 file. So far it shows that it is up and running. Although my multi window manager wasn't able to work, it may not be compatible with lollipop.
Click to expand...
Click to collapse
I believe you also have to install arter97's xposed-v71-sdk21-arm-arter97-V6-snapdragon.zip in order for xposed to work properly on Samsung roms.
I thought that was already done? What was done to make this ROM Xposed ready?
frequentc said:
I believe you also have to install arter97's xposed-v71-sdk21-arm-arter97-V6-snapdragon.zip in order for xposed to work properly on Samsung roms.
Click to expand...
Click to collapse
BOOM, shalakalaka
dirtybudha said:
I thought that was already done? What was done to make this ROM Xposed ready?
Click to expand...
Click to collapse
Nothing was done except deodexing it, which is what is needed for arter97's xposed files to work. When I mentioned that you'd still need to install arter97's stuff, I thought that would be clear (but I may have added that after you downloaded it).
I didn't want to include arter97's xposed files in case some people didn't want it, it's still in alpha status stability wise and gets updated often, and it can also easily be added by flashing arter97's latest file. I simply mentioned xposed ready, so people would know that it could be installed.
I've updated the OP to make it clearer.
Touche.
Well it worked great!
frequentc said:
Nothing was done except deodexing it, which is what is needed for arter97's xposed files to work. When I mentioned that you'd still need to install arter97's stuff, I thought that would be clear (but I may have added that after you downloaded it).
I didn't want to include arter97's xposed files in case some people didn't want it, it's still in alpha status stability wise and gets updated often, and it can also easily be added by flashing arter97's latest file. I simply mentioned xposed ready, so people would know that it could be installed.
I've updated the OP to make it clearer.
Click to expand...
Click to collapse
BOOM, shalakalaka
hey i flashed your rom and everything is working good for now, its just i cant find xposed framework. i get to one thread, it leads me to some other post, that post leads to other thread and so on, and im losing my mind.
pls explain me like to a 6yr child what should i do to install framework or put direct links
100% Stock, DeOdexed N910PVPS4DQB3With GSM Support!Now with Rom Control!
First Off About Me:
First off, Let me state, I'm a full-time construction worker and also a full-time Dad. I'm not a Dev, like the peeps I learned from. So don't expect this Rom to get massive updates or often updates. My main purpose of this Rom is to deliver a Newer Stock Base for anyone to play with. But I do intend on adding small basic updates, as this interest me as a hobby! Thank You for your understanding, and Enjoy!
About ROM
Warning: This ROM is ONLY for the Sprint SM-N910P!!! DO NOT FLASH THIS ROM ON ANY OTHER MODEL!!! If you do then you are on your own! Know what you are doing before flashing and modifying your phone!!! You have been Warned!! I am not responsible for your phone breaking or blowing up!!
It has come to my attention that not everyone would want Root or Any customizations. So what I did was supply a True 100% Stock Deodexed QB3 Rom with NO Mods, Except for being Knox and Its-On Free. You can use it alone or as a base to flash my other mods!!
Version: 2.0
This is a "100% stock" build with no custom mods!
Fully deodexed framework and system apps
Removed Knox
Removed ItsOn
Zip-Aligned
100% Stock Kernel
Software version: N910PVPS4DQB3
Kernel: Official Samsung N910PVPS4DQB3
ROM Features
This ROM will stay 100% STOCK besides above mentions. So this Rom could be used as a base for anyone who chooses. I do plan on releasing some minor updates of my own but They will be listed below!
Changelog
v2.0 Stock Released 03/15/2017
ADD-ON Features!
Heres a little bit about what add-ons I have so far! No big write up on them, they are self explaining!
1. GSM zip: Makes Rom work with GSM service! Removes some cdma stuff from CSC files. Removes unneeded apps. Replaces apns and build.prop edits.
2. Mods zip: This installs all the modded framwork files. (ex. Advanced power menu, Open Once/Always) This one will get updated time to time, as I add stuff!! SEE POST 2 FOR MORE INFO!!
3. Root zip: Installs Systemless SuperSU and Systemless Busybox.
4. Hidden Apps: Restores Hidden Apps. (For Sprint only)
Flashing instructions:
Before you flash this rom you should be on the N910PVPS4DQB3 firmware. Specifically the bootloader and modem. You can get that HERE! Flash it with ODIN!
Also, You need a custom recovery to Flash this Rom!
***Before you flash this rom, please make sure your battery has at least 30% charge***
OK... Lets begin!
1. Download the rom and all the other mods you want!
2. Check the MD5!!! Use a MD5 checksum tool on your pc or phone (Google is your friend)
3. Copy the downloaded files to your phone's internal storage or micro-sd card
4. Backup anything you need to backup from your internal storage and copy it to your pc or sd-card
5. Reboot to TWRP custom recovery. Do "Advanced Wipe" options and wipe Dalvick-Cache, System, Data, and Cache. I also advise deleting /Android directory from Internal storage and SD card!
6. Install the rom!
7. Dont Reboot If Installing any Mods.
8. Install Mods in this Order following ROM:
a. GSM FIX(If your using GSM) or Hidden Apps Fix(If Sprint)
b. MODS ZIP!
c. ROOT ZIP!
9. REBOOT!!
10. The initial boot process will take around 12 minutes. Please be patient. It WILL boot.
11. The phone might reboot once from SuperSU.
12. Once you reach the setup wizard proceed as usual and setup your phone.
13. You're done! Enjoy!!
Credits
Without the following people NONE of this would be possible. Period.
In no particular order!
@SuperR. for his awesome kitchen, @Chainfire for root and SuperSU, @iBotPeaches for apktool, @JesusFreke for smali/baksmali tools, and @asc1977 & @edzamber & @tdunham for all their amazing collection of guides!
Also @tx_dbs_tx, @carlosggb, @SaintZ93, @hsbadr, @osm0sis, @freeza, @ianmb, @LMMT, @samep, and @wantedman76 for all their work that I've learned much from! And SO Many more here at XDA!
Thank You All !!
DOWNLOADS
(Click the link below)
Stock, DeOdexed N910PVPS4DQB3 - v2
MD5: e4d9ef38aefb76eb362cec8e2d9947fe
MODS
See Post 2!
Rom Control
See Post 3!
I need this confirmed! Please report!
Contribited By: aaron74
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: N910PVPS4DQB3_N910PSPT4DQB3_N910PVPS4DQB3_HOME
Based On: Stock N910PVPS4DQB3
Created 2017-03-06
Edited 2017-05-01
Add-on mods downloads!
1. GSM Fix!
2. Systemless Busybox&Root Mod!
3. MODS ADD-ON Zip:
Includes the following mods so far:
Advanced Power Menu
Remove Permanet Notifications
Once/Always Default App Selection
Hot Spot Mod included!
4. Hidden Apps!
Rom control!
A great Dev @ROBERT CM made a Rom Control for our stock roms.
Goto his Thread below to Download and don't forget to Thank him and leave him a reply!
Here's his Main Thread!
Here's the Current Rom Control Post!
I also need this tested, please let me know it works!
Thank you, & Enjoy!
Nice!
Thanks @aaron74 I know we've had some requests for latest rooted stock ROM.
This sounds like what they're looking for. With developers leaving and Note 4 closing in on EOL, this device needs more developers. Best wishes for success and your endeavor to learning more.
Sent from my SM-N920P using Tapatalk
Good job! Thanks for sharing your work with the community.
Sent from my SM-N920P using Tapatalk
@samep @LMMT
I hope I can spend the time I'd like to on it.
But Thanks for your support !
any screenshots
أرسلت من SM-N930V بإستخدام تاباتلك
If someone tries adding the hotspot in, can you please let us know how it works?
alisaeed072 said:
any screenshots
أرسلت من SM-N930V بإستخدام تاباتلك
Click to expand...
Click to collapse
I can add some.
I didn't because it's just stock.
lmcmann said:
If someone tries adding the hotspot in, can you please let us know how it works?
Click to expand...
Click to collapse
I'm working on it.
Thank you for sharing. Downloading now.
Thank you for taking time from your schedule in real life to contribute to the xda and for keeping note 4 THE best phone available to date . I was just wondering if you would know how to fix the root switch barrier i have come accross when trying to load pokemon app , when i was on stock pk1 odexed i used root switch app to disable root and i played the game fine using flygps with this build and being deodexed when i try to do the same it fails , first the gps says cannot be found thats because im using mock location app and second pokemon app itself tells me it cannot authenticate the account im guessing cause it cannot pass the safety net test, so my question is ...is it a easy fix or is it something that would take weeks of work if it is dont even bother buddy ill just roll back to my backup its no biggie but if its easy i'd like to keep this build and have the pokemon working thanks.
bigbabo said:
Thank you for taking time from your schedule in real life to contribute to the xda and for keeping note 4 THE best phone available to date . I was just wondering if you would know how to fix the root switch barrier i have come accross when trying to load pokemon app , when i was on stock pk1 odexed i used root switch app to disable root and i played the game fine using flygps with this build and being deodexed when i try to do the same it fails , first the gps says cannot be found thats because im using mock location app and second pokemon app itself tells me it cannot authenticate the account im guessing cause it cannot pass the safety net test, so my question is ...is it a easy fix or is it something that would take weeks of work if it is dont even bother buddy ill just roll back to my backup its no biggie but if its easy i'd like to keep this build and have the pokemon working thanks.
Click to expand...
Click to collapse
Thanks!
But No I wouldn't have a clue about that. I'm not quite that talented yet. Ive just started learning some of the more technical stuff about modding.
If you do find out the possible fix, I'd be more than happy to incorporate it into the rom!
Thanks!
Edit: I'm just taking a stab in the dark here, but since we're dealing with root. I'm wondering if it has anything to do with su.d or system less root or dmverity.
What exact rom were you on when it worked?
I'm not home right now, but try extracting the stock kernel from the qb3 firmware.
Flash it then flash Super su again.
Then try the root switch.
Let me know if that does anything?
bigbabo said:
Thank you for taking time from
Click to expand...
Click to collapse
I managed to put together a fix to try. I'm just quessing but this will let me rule out if its related to the kernel.
Its stock PK1 Kernel (all i have on phone right now).
Download it,
Uninstall the Root switch app.
Flash the kernel zip. Reboot!
Then install Root switch.
Let me know if it works. :fingers-crossed:
EDIT- SEE Post BELOW!!
Pokeman and snapchat won't work with root... Not rom related.
Sent from my SM-N910P using Tapatalk
kaos420 said:
Pokeman and snapchat won't work with root... Not rom related.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Thanks for the info!!
kaos420 said:
Pokeman and snapchat won't work with root... Not rom related.
Click to expand...
Click to collapse
I didnt say with root i said when i turn root off using the app it worked fine so did the samsung pay as well ,i know that while root is active it wouldnt work
---------- Post added at 05:31 PM ---------- Previous post was at 05:28 PM ----------
aaron74 said:
Thanks!
But No I wouldn't have a clue about that. I'm not quite that talented yet. Ive just started learning some of the more technical stuff about modding.
If you do find out the possible fix, I'd be more than happy to incorporate it into the rom!
Thanks!
Edit: I'm just taking a stab in the dark here, but since we're dealing with root. I'm wondering if it has anything to do with su.d or system less root or dmverity.
What exact rom were you on when it worked?
I'm not home right now, but try extracting the stock kernel from the qb3 firmware.
Flash it then flash Super su again.
Then try the root switch.
Let me know if that does anything?
Click to expand...
Click to collapse
Im on pl1 build stock rooted odexd, all i did is odined pl1 and root it nothing else been done to it i will try what u recommended see if that works
---------- Post added at 05:36 PM ---------- Previous post was at 05:31 PM ----------
aaron74 said:
I managed to put together a fix to try. I'm just quessing but this will let me rule out if its related to the kernel.
Its stock PK1 Kernel (all i have on phone right now).
Download it,
Uninstall the Root switch app.
Flash the kernel zip. Reboot!
Then install Root switch.
Let me know if it works. :fingers-crossed:
EDIT- SEE Post BELOW!!
Click to expand...
Click to collapse
I can post screeny of the safety net so you can see what message comes up when i turn root off on my setup and i can play pokemon and than ill take one of the safety net with your rom maybe that will give you some details ,once again im not applying any pressure on you at all like i said before its no biggie i was just wondering if it could be something simple than why not have the latest rom and still be able to play pokemon
These are from my own setup stock pl1 build stock everything root turned off is green turned on is red im going to upload screenies on your rom in different post so i dont confuse you and after than ill try the fix you suggested .
bigbabo said:
These are from my own setup stock pl1 build stock everything root turned off is green turned on is red im going to upload screenies on your rom in different post so i dont confuse you and after than ill try the fix you suggested .
Click to expand...
Click to collapse
You are running stock kernel right?
And also, you are NOT running xposed?
This is the only way i know to get Safetynet green.
The dev from Magisk is working real hard to let us keep root on for Safetynet Passing, but on the xposed side we still have that big problem.
carlosggb said:
You are running stock kernel right?
And also, you are NOT running xposed?
This is the only way i know to get Safetynet green.
The dev from Magisk is working real hard to let us keep root on for Safetynet Passing, but on the xposed side we still have that big problem.
Click to expand...
Click to collapse
No xposed just stock everything like if i took ota and than rooted it than i use root switch app and turn root off and voila pokemon works like im not rooted but on this build when i turn root off with that app and try the pokemon it doesnt work so im about to try to flash the pk1 kernel with this new build and see if that works
Warning: Before you proceed, I am not responsible for any bricked or non working devices
Here are the 3 versions for stock ROMs made using J710F's ROM(J710FXXU5BRD5_J710FODD5BRD4_INS firmware) and works on both J710F and J710FN.
Following ROMs are deodexed,zipaligned but not rooted and made using Superrs Kitchen:
Slightly Debloated: Removed all those non removable apps which are installable via playstore like
Microsoft apps like Excel, PowerPoint, Word, Skype
All Pre-Installed google apps like Gmail,Drive etc.
Facebook
Fully Debloated: Debloated the "Slightly Debloated" version by removing some samsung apps like:
Samsung Pay Mini
Samsung Browser and Email app
Samsung Members
Opera Max
SHealth etc.
And all those apps removed in "slightly debloated" version
Deknoxed: Removed knox from the fully debloated version(s bike mode may not work), rest works fine.
Note:
If you want to use parts of my ROMs, feel free to do so, and give credits if you want
Also J710MN user if you want a stock deodexed version of your rom send me link of the stock rom
And for any changes or bugs, please look into previous comments, before commenting repeatitive comments.
First Boot may take time, and
Bugs: As far as I know, none. But if you get hindi version(or any other laguage other than english) on first boot, do wipe again and this time wipe internal storage too and reflash.
Downloads (read descriptions above before downloading):
Slightly Debloated: link
Fully Debloated: link
Deknoxed: link
Credits:
@SuperR. for his amazing kitchen
How long does it take to boot up? I downloaded the deKNOXED version, flashed it with TWRP and got already 10 minutes into first boot.
Im sure this will come in handy
Thanks for the rom
Why not making a ROM / Kernel with Knox support? Like SuperStock Kernel for S7...
Alpharou said:
How long does it take to boot up? I downloaded the deKNOXED version, flashed it with TWRP and got already 10 minutes into first boot.
Click to expand...
Click to collapse
Mine booted in 7-8 minutes. Try going into twrp and wiping cache and dalvik cache. And wait for about 15min since first boot takes time.
But if you get some other language like hindi on startup I would recommend wiping system,cache,dalvik,data,internal again.
bien2004 said:
Why not making a ROM / Kernel with Knox support? Like SuperStock Kernel for S7...
Click to expand...
Click to collapse
Will try,
Any of these which can be [officially] updated to Oreo?
chechemon said:
Any of these which can be [officially] updated to Oreo?
Click to expand...
Click to collapse
Nope, you need to install stock ROM via Odin and then update to Oreo. You can root after Updating to Oreo by flashing twrp again and make sure you install magisk 17.3 or above.
I would suggest not rooting until your country's version of stock oreo rom (Odin flashable) is available.
links are gone