[APP][SNAPSHOT]Dual-Boot Patcher - Even On /Data! - T-Mobile Samsung Galaxy S6 Edge

REMEMBER THIS IS A SNAPSHOT BUILD, THAT MEANS THE APK IS BUILT AS SOON AS CHANGES ARE PUSHED FROM THE MASTER HIMSELF @chenxiaolong
I'm proud to present the first dual boot project for the Qualcomm-based Samsung Galaxy S4! This project started off as a feature in my ROM, but not anymore. This will allow any two ROMs (soon, three) to be installed at the same time. It works by patching the secondary ROM's installation scripts and boot image to load the ROM files from an alternate location (/system/dual, /cache/dual, and /data/dual). Because of the way this is implemented, no changes to the primary ROM are necessary
Click to expand...
Click to collapse
By @chenxiaolong
Tested Personally myself @ktetreault14 with the G920T Xtresolite 5.0.2 ROM (found here) as my primary rom. I then used @eousphoros 5.1.1 Debloated V2 ROM (found here) as my secondary. I even have a Sprint OE2 rom I was testing in a third slot. You might wonder how this is possible. All thanks to chenxiaolong's brilliant multibooting system. He has now added in the ability to install roms straight from your /data partition All without touching your primary rom. You could be stock rooted and have no problems as long as it isn't aroma. (In which case I think you could alwasys use flashfire) The S6 Edge didnt have a very large /system partition (only 4.05 gb ) and /cache was nothing to brag about either (for those inquiring minds it is 304.7mb) So naturally I asked the amazing quick chen if there was any way I could Install it to my ~25gb /data partition, within days he whipped something up... But enough with the story get on with the tutorial and show me the downloads... Ok Fine.. Here. We. Go!!!!!!!!!!!! :fingers-crossed:
TUTORIAL AND PICS AND VIDEOS
I'm Assuming you have the apk downloaded and installed. Also you have the rom and, if you need it, the kernel already downloaded on placed on your phone's memory.
Step 1| Open the apk, Swipe right from left edge, Patch Zip File.
Step 2| That is obvioulsy not your phone so lets change that. Click jflte and select zerolte in the dropdown. (BTW all those other phones are supported too.)
Step 3| Change where you would like it to install too. (Most likely going to be /data unless the roms are heavily debloated or AOSP) For the purposes of this tutorial it is going to /data
Step 4| Name your ROM. Pick Your ROM.
Step 5| Ignore The Information Here, Scroll down, Tap to begin patching. Do as many times as you would like
Step 6| Open hamburger menu, ROMs, click the FAB (Floating Action Button), click +, pick patched rom.
Step 7| Keep Installation Location or change if you are not sure. Do as with many zips you would like to install.
Step 8| Click checkmark in top left corner.
Step 9| Reboot and you will boot up into new rom
IF YOU WOULD LIKE TO SWITCH ROMS
Step 1. Open App
Step 2. Click ROMs
Step 3. Click Rom you want to boot to
Step 4. Reboot
Dual-Boot Patcher Thread
DISCLAIMER: We are not responsible for any issues, problems, or broken phones, which may have come from using any data or information you receive from this thread. Using anything here, will most likely violate your cell phone's warranty or contract. That is also your 100% responsibility, to know, and your responsibilty if you do. If you don't know what you are doing, or you think you do, and you brick your phone, or something POSITIVE OR NEGATIVE changes with your phone, it is all 100% your responsibility. Use the following data, information, and links at YOUR OWN RISK!
SNAPSHOT BUILDS
HERE @chenxiaolong
Dual-Boot Switcher.zip Alpha
USE THIS TO SWITCH BETWEEN ROMS IN RECOVERY
Get The Latest Version In Chen's Thread
CREDITS
@chenxiaolong - He is the maker and current maintainer

Thanks for making this thread!

PSA
If you are on tge unrooted 5.1.1 rom, after you patch the zip just flash from recovery.

ktetreault14 said:
No problem I need to get the word out. Lol
Click to expand...
Click to collapse
If I'm running the eousphoros 5.1.1 Debloated V2 ROM as my primary, I would need to start over, correct? (since this ROM doesn't have root and has stock recovery)

whittikins said:
If I'm running the eousphoros 5.1.1 Debloated V2 ROM as my primary, I would need to start over, correct? (since this ROM doesn't have root and has stock recovery)
Click to expand...
Click to collapse
Nope. You only need root for the app if you want to flash in-app. Just patch rom and install from recovery

Nice Thread
Thanks for usefull thread

No problem. It's even another now

I couldn't get the 5.1.1 ROM to work. It says it's unsupported and fails to flash.
Sent from my SM-G925T using Tapatalk

Hopefully we get more Roms options soon, loved this on my S3 switching between 2 different setups, currently we have what, one Rom 5.02 and a stock 5.1.1 without root?
Sent from my SM-G925T using XDA Free mobile app

Yes I agree thanks for making this thread!

App sharing problem
I didn't check the box that it says to check if you want to share info from one partition to another but it is sharing. How do I stop that? I want to have one ROM for work and one for personal without the info of pics crossing over.

s6 edge?
This is posted in the tmobile s6 edge forum but you only mention using this with the s4. Is this actually usable on the s6 edge? I checked the threads of chenxiaolong from post #1 but I only saw reference to the s4 in his threads as well.
I'd like to dual boot my phone but this thread doesn't make me believe it works for us s6 edge users.

Yeah using it noe

It seems arter kernel not supported.

eweo911 said:
This is posted in the tmobile s6 edge forum but you only mention using this with the s4. Is this actually usable on the s6 edge? I checked the threads of chenxiaolong from post #1 but I only saw reference to the s4 in his threads as well.
I'd like to dual boot my phone but this thread doesn't make me believe it works for us s6 edge users.
Click to expand...
Click to collapse
Jsut need to know if this is currently working for S6 Edge

I have the g920 flat s6t and haven't have any issues duel booting. Always had Sickness roms as my primary and with all his versions i had no issues with duel boot but now in his latest v9 built i am unable to duel boot. When i reboot secondary rom it stays at samsung boot logo, it does not go into recovery. When i flash the utility zip to switch to primary rom it boot loops and goes to recovery and none of the roms boots..so i reflashed sick as hell v7 and its duel booting good. The rom developer told me he have no change anything from v7 to v9 he just added some tweaks and xtra apps, don't understand why is not duel booting with latest rom. I did flashed the log file. I will attach it.

Related

[ROM][N900T] Stock Lollipop 5.0 (N900TUVUFOB6) v1.1 - ROOT+DEODEX+ZIPALIGN+deKNOX

I know mastergrillo already has a thread similar to this, but I didn't see an option that had everything I wanted. I'm just sharing the version I made for myself in case anyone needs it. Flash at your own risk.
This is simply a stock Samsung Lollipop 5.0 rom (N900TUVUFOB6) for the T-Mobile Galaxy Note 3 (N900T) that includes the following features:
Features:
Rooted (SuperSU and Busybox included)
KNOX removed (it will still trip KNOX 0x1, but it won't annoy you about a security issue)
Deodexed (makes the system easier to MOD and is currently required for installing the Xposed framework)
Zipaligned (optimizes apk alignment to reduce memory usage)
Rom based /etc/init.d script support (doesn't require a kernel with init.d support, but it will still work fine if your kernel does [scripts shouldn't get run twice])
Untouched stock Samsung kernel
It was not debloated because what's bloat to me may be useful to someone else and vice versa. You can easily debloat it yourself using Titanium Backup or a debloating script.
Nothing else was touched, and all T-Mobile based features like wifi calling work fine.
Issues:
No issues that I know of.
Installation instructions
Note: This rom does not include the lollipop bootloader or modem, so it's recommended to update both of those first if you haven't already.
Do a full backup
Flash with TWRP recovery (other custom recoveries may work, but it hasn't been tested)
Wipe dalvik cache, system, data, and cache partitions before installing. You probably don't have to wipe the data partition if you're coming from the original Samsung Lollipop 5.0 (this will preserve your apps and settings), but I haven't tested it.
May take 10 to 20 minutes for first boot (it will stay on the t-mobile logo for a while). Just be patient.
Stagefright vulnerability fix
There's a patch available to fix the stagefright vulnerabilities (credit goes to mastergrillo for this). The patch can be installed with TWRP immediately after installing the rom (you don't need to reboot first).
Other MODs that are compatible with this ROM (not included)
External sdcard write fix (allows apps to write to the external sdcard)
Android 6.0 Marshmallow boot animation (here's a video of what it looks like)
Xposed framework
Note: Xposed is still in alpha status for Lollipop, so some modules may still have issues.
First install XposedInstaller_3.0_alpha4.apk (or newer) from here
And then flash xposed-v75-sdk21-arm-arter97-snapdragon.zip (or newer) from here using TWRP. The important parts of the filename that should stay the same are "sdk21" (for Lollipop 5.0.x) and "snapdragon" (for our chipset).
If you have any questions or issues with Xposed, please ask them in arter97's Xposed thread.
Download ROM
XDA:DevDB Information
N900TUVUFOB6-frequentc, ROM for the T-Mobile Samsung Galaxy Note 3
Contributors
frequentc
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2015-10-02
Created 2015-10-01
Last Updated 2015-11-17
Reserved
1st yes
Downloading now.
I'm a fan of straight stock look. I'll came back with any more input.
Xposed is a new idea with lollipop but I'll give it a go.
Thanks!
BOOM, shalakalaka
dirtybudha said:
Downloading now.
I'm a fan of straight stock look. I'll came back with any more input.
Xposed is a new idea with lollipop but I'll give it a go.
Thanks!
BOOM, shalakalaka
Click to expand...
Click to collapse
Here's arter97's version of xposed that will work with Samsung deodexed touchwiz roms: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
You tha man!
I followed the link in the OP, thanks.
frequentc said:
Here's arter97's version of xposed that will work with Samsung deodexed touchwiz roms: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
Click to expand...
Click to collapse
UPDATE: I seem to got be getting data after installation. I've installed twice. I cannot just say this is bogus, but I'm just sharing that I can't get data with this ROM in the OP.
dirtybudha said:
UPDATE: I seem to [not] be getting data after installation. I've installed twice. I cannot just say this is bogus, but I'l just sharing that I can't get data with this ROM in the OP.
Click to expand...
Click to collapse
@dirtybudha
The data service problem has been fixed in version 1.1 (OP updated with link).
The bug happened because I forgot to include the CSC files from the original Samsung rom. I didn't notice the bug because I manually flashed the CSC files after flashing the rom, which fixed the problem for me.
Anyways, I reflashed the new version myself using the flashing instructions in the OP to verify that it was corrected. It should work fine now.
..
Thanks! Will flash and report back.
Update: Data works! Bluetooth won't turn on. I'm sending a pm with a logcat.
BOOM, shalakalaka
dirtybudha said:
Update: Data works! Bluetooth won't turn on. I'm sending a pm with a logcat.
Click to expand...
Click to collapse
Hey, I just tested bluetooth on my phone, but I can't replicate your problem. It's working fine for me. You may want to try clearing the caches if you haven't already. I did a full wipe (system, data, cache, and dalvik cache) when flashing version 1.1.
How did you flash version 1.1? Was it a clean install? Can you please tell me what you wiped? Have you tried this bluetooth device on the stock lollipop before?
If anyone else has tried bluetooth, please post your results.
Thanks
And can you please tell me the device you tried to pair with the phone, or would bluetooth just not turn on at all when you tried to enable it?
Edit:
btw.. are you running the lollipop bootloader and modem?
It was a clean install, wiped caches, data, system. I do this ever time i flag a ROM. I do have the bootloader and modem for Lollipop. I'm currently running stock Lollipop,and have been for a while.
I was trying to pair my Asus Zenwatch. Problem is that the Bluetooth Jay wouldn't turn on at all.
Let me try again. Could have been a bad a download or the moon wasn't in the right place last night.
Update: it was a bad download, apparently. Seems like everything is working so far.
About to backup everything and flash Xposed.
BOOM, shalakalaka
I've actually been looking for exactly this. Being that it is bone stock is it safe to assume that Wifi calling and everything else works?
If you read through the OP you will see that this ROM is almost entirely stock for the T-Mobile Note 3. That means WiFi Calling works. I just turned it on and everything is in order.
RelayTech said:
I've actually been looking for exactly this. Being that it is bone stock is it safe to assume that Wifi calling and everything else works?
Click to expand...
Click to collapse
Xposed took some thinking, all anyone needs to do is flash the Alpha 4 file. So far it shows that it is up and running. Although my multi window manager wasn't able to work, it may not be compatible with lollipop. I'll have to go through and test some of the apps later. I just left the FC Dallas soccer game and I'm headed home to watch the Dallas Cowboys play.
Great work! I, as well as the community, appreciate your contribution.
BOOM, shalakalaka
dirtybudha said:
Xposed took some thinking, all anyone needs to do is flash the Alpha 4 file. So far it shows that it is up and running. Although my multi window manager wasn't able to work, it may not be compatible with lollipop.
Click to expand...
Click to collapse
I believe you also have to install arter97's xposed-v71-sdk21-arm-arter97-V6-snapdragon.zip in order for xposed to work properly on Samsung roms.
I thought that was already done? What was done to make this ROM Xposed ready?
frequentc said:
I believe you also have to install arter97's xposed-v71-sdk21-arm-arter97-V6-snapdragon.zip in order for xposed to work properly on Samsung roms.
Click to expand...
Click to collapse
BOOM, shalakalaka
dirtybudha said:
I thought that was already done? What was done to make this ROM Xposed ready?
Click to expand...
Click to collapse
Nothing was done except deodexing it, which is what is needed for arter97's xposed files to work. When I mentioned that you'd still need to install arter97's stuff, I thought that would be clear (but I may have added that after you downloaded it).
I didn't want to include arter97's xposed files in case some people didn't want it, it's still in alpha status stability wise and gets updated often, and it can also easily be added by flashing arter97's latest file. I simply mentioned xposed ready, so people would know that it could be installed.
I've updated the OP to make it clearer.
Touche.
Well it worked great!
frequentc said:
Nothing was done except deodexing it, which is what is needed for arter97's xposed files to work. When I mentioned that you'd still need to install arter97's stuff, I thought that would be clear (but I may have added that after you downloaded it).
I didn't want to include arter97's xposed files in case some people didn't want it, it's still in alpha status stability wise and gets updated often, and it can also easily be added by flashing arter97's latest file. I simply mentioned xposed ready, so people would know that it could be installed.
I've updated the OP to make it clearer.
Click to expand...
Click to collapse
BOOM, shalakalaka
hey i flashed your rom and everything is working good for now, its just i cant find xposed framework. i get to one thread, it leads me to some other post, that post leads to other thread and so on, and im losing my mind.
pls explain me like to a 6yr child what should i do to install framework or put direct links

[03/15/2017] [ROM] [N910PVPS4DQB3] [100% Stock, DeOdexed N910PVPS4DQB3]

100% Stock, DeOdexed N910PVPS4DQB3​With GSM Support!​Now with Rom Control! ​
First Off About Me:
First off, Let me state, I'm a full-time construction worker and also a full-time Dad. I'm not a Dev, like the peeps I learned from. So don't expect this Rom to get massive updates or often updates. My main purpose of this Rom is to deliver a Newer Stock Base for anyone to play with. But I do intend on adding small basic updates, as this interest me as a hobby! Thank You for your understanding, and Enjoy!
About ROM
Warning: This ROM is ONLY for the Sprint SM-N910P!!! DO NOT FLASH THIS ROM ON ANY OTHER MODEL!!! If you do then you are on your own! Know what you are doing before flashing and modifying your phone!!! You have been Warned!! I am not responsible for your phone breaking or blowing up!!
It has come to my attention that not everyone would want Root or Any customizations. So what I did was supply a True 100% Stock Deodexed QB3 Rom with NO Mods, Except for being Knox and Its-On Free. You can use it alone or as a base to flash my other mods!!
Version: 2.0
This is a "100% stock" build with no custom mods!
Fully deodexed framework and system apps
Removed Knox
Removed ItsOn
Zip-Aligned
100% Stock Kernel
Software version: N910PVPS4DQB3
Kernel: Official Samsung N910PVPS4DQB3
ROM Features
This ROM will stay 100% STOCK besides above mentions. So this Rom could be used as a base for anyone who chooses. I do plan on releasing some minor updates of my own but They will be listed below!
Changelog
v2.0 Stock Released 03/15/2017
ADD-ON Features!
Heres a little bit about what add-ons I have so far! No big write up on them, they are self explaining!
1. GSM zip: Makes Rom work with GSM service! Removes some cdma stuff from CSC files. Removes unneeded apps. Replaces apns and build.prop edits.
2. Mods zip: This installs all the modded framwork files. (ex. Advanced power menu, Open Once/Always) This one will get updated time to time, as I add stuff!! SEE POST 2 FOR MORE INFO!!
3. Root zip: Installs Systemless SuperSU and Systemless Busybox.
4. Hidden Apps: Restores Hidden Apps. (For Sprint only)
Flashing instructions:
Before you flash this rom you should be on the N910PVPS4DQB3 firmware. Specifically the bootloader and modem. You can get that HERE! Flash it with ODIN!
Also, You need a custom recovery to Flash this Rom!
***Before you flash this rom, please make sure your battery has at least 30% charge***​
OK... Lets begin!
1. Download the rom and all the other mods you want!
2. Check the MD5!!! Use a MD5 checksum tool on your pc or phone (Google is your friend)
3. Copy the downloaded files to your phone's internal storage or micro-sd card
4. Backup anything you need to backup from your internal storage and copy it to your pc or sd-card
5. Reboot to TWRP custom recovery. Do "Advanced Wipe" options and wipe Dalvick-Cache, System, Data, and Cache. I also advise deleting /Android directory from Internal storage and SD card!
6. Install the rom!
7. Dont Reboot If Installing any Mods.
8. Install Mods in this Order following ROM:
a. GSM FIX(If your using GSM) or Hidden Apps Fix(If Sprint)
b. MODS ZIP!
c. ROOT ZIP!
9. REBOOT!!
10. The initial boot process will take around 12 minutes. Please be patient. It WILL boot.
11. The phone might reboot once from SuperSU.
12. Once you reach the setup wizard proceed as usual and setup your phone.
13. You're done! Enjoy!!
Credits
Without the following people NONE of this would be possible. Period.
In no particular order!
@SuperR. for his awesome kitchen, @Chainfire for root and SuperSU, @iBotPeaches for apktool, @JesusFreke for smali/baksmali tools, and @asc1977 & @edzamber & @tdunham for all their amazing collection of guides!
Also @tx_dbs_tx, @carlosggb, @SaintZ93, @hsbadr, @osm0sis, @freeza, @ianmb, @LMMT, @samep, and @wantedman76 for all their work that I've learned much from! And SO Many more here at XDA!
Thank You All !!​
DOWNLOADS
(Click the link below)
Stock, DeOdexed N910PVPS4DQB3 - v2
MD5: e4d9ef38aefb76eb362cec8e2d9947fe
MODS
See Post 2!
Rom Control
See Post 3!
I need this confirmed! Please report!
Contribited By: aaron74
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: N910PVPS4DQB3_N910PSPT4DQB3_N910PVPS4DQB3_HOME
Based On: Stock N910PVPS4DQB3
Created 2017-03-06
Edited 2017-05-01
Add-on mods downloads!
1. GSM Fix!
2. Systemless Busybox&Root Mod!
3. MODS ADD-ON Zip:
Includes the following mods so far:
Advanced Power Menu
Remove Permanet Notifications
Once/Always Default App Selection
Hot Spot Mod included!
4. Hidden Apps!
Rom control!
A great Dev @ROBERT CM made a Rom Control for our stock roms.
Goto his Thread below to Download and don't forget to Thank him and leave him a reply!
Here's his Main Thread!
Here's the Current Rom Control Post!
I also need this tested, please let me know it works!
Thank you, & Enjoy!
Nice!
Thanks @aaron74 I know we've had some requests for latest rooted stock ROM.
This sounds like what they're looking for. With developers leaving and Note 4 closing in on EOL, this device needs more developers. Best wishes for success and your endeavor to learning more.
Sent from my SM-N920P using Tapatalk
Good job! Thanks for sharing your work with the community.
Sent from my SM-N920P using Tapatalk
@samep @LMMT
I hope I can spend the time I'd like to on it.
But Thanks for your support !
any screenshots
أرسلت من SM-N930V بإستخدام تاباتلك
If someone tries adding the hotspot in, can you please let us know how it works?
alisaeed072 said:
any screenshots
أرسلت من SM-N930V بإستخدام تاباتلك
Click to expand...
Click to collapse
I can add some.
I didn't because it's just stock.
lmcmann said:
If someone tries adding the hotspot in, can you please let us know how it works?
Click to expand...
Click to collapse
I'm working on it.
Thank you for sharing. Downloading now.
Thank you for taking time from your schedule in real life to contribute to the xda and for keeping note 4 THE best phone available to date . I was just wondering if you would know how to fix the root switch barrier i have come accross when trying to load pokemon app , when i was on stock pk1 odexed i used root switch app to disable root and i played the game fine using flygps with this build and being deodexed when i try to do the same it fails , first the gps says cannot be found thats because im using mock location app and second pokemon app itself tells me it cannot authenticate the account im guessing cause it cannot pass the safety net test, so my question is ...is it a easy fix or is it something that would take weeks of work if it is dont even bother buddy ill just roll back to my backup its no biggie but if its easy i'd like to keep this build and have the pokemon working thanks.
bigbabo said:
Thank you for taking time from your schedule in real life to contribute to the xda and for keeping note 4 THE best phone available to date . I was just wondering if you would know how to fix the root switch barrier i have come accross when trying to load pokemon app , when i was on stock pk1 odexed i used root switch app to disable root and i played the game fine using flygps with this build and being deodexed when i try to do the same it fails , first the gps says cannot be found thats because im using mock location app and second pokemon app itself tells me it cannot authenticate the account im guessing cause it cannot pass the safety net test, so my question is ...is it a easy fix or is it something that would take weeks of work if it is dont even bother buddy ill just roll back to my backup its no biggie but if its easy i'd like to keep this build and have the pokemon working thanks.
Click to expand...
Click to collapse
Thanks!
But No I wouldn't have a clue about that. I'm not quite that talented yet. Ive just started learning some of the more technical stuff about modding.
If you do find out the possible fix, I'd be more than happy to incorporate it into the rom!
Thanks!
Edit: I'm just taking a stab in the dark here, but since we're dealing with root. I'm wondering if it has anything to do with su.d or system less root or dmverity.
What exact rom were you on when it worked?
I'm not home right now, but try extracting the stock kernel from the qb3 firmware.
Flash it then flash Super su again.
Then try the root switch.
Let me know if that does anything?
bigbabo said:
Thank you for taking time from
Click to expand...
Click to collapse
I managed to put together a fix to try. I'm just quessing but this will let me rule out if its related to the kernel.
Its stock PK1 Kernel (all i have on phone right now).
Download it,
Uninstall the Root switch app.
Flash the kernel zip. Reboot!
Then install Root switch.
Let me know if it works. :fingers-crossed:
EDIT- SEE Post BELOW!!
Pokeman and snapchat won't work with root... Not rom related.
Sent from my SM-N910P using Tapatalk
kaos420 said:
Pokeman and snapchat won't work with root... Not rom related.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Thanks for the info!!
kaos420 said:
Pokeman and snapchat won't work with root... Not rom related.
Click to expand...
Click to collapse
I didnt say with root i said when i turn root off using the app it worked fine so did the samsung pay as well ,i know that while root is active it wouldnt work
---------- Post added at 05:31 PM ---------- Previous post was at 05:28 PM ----------
aaron74 said:
Thanks!
But No I wouldn't have a clue about that. I'm not quite that talented yet. Ive just started learning some of the more technical stuff about modding.
If you do find out the possible fix, I'd be more than happy to incorporate it into the rom!
Thanks!
Edit: I'm just taking a stab in the dark here, but since we're dealing with root. I'm wondering if it has anything to do with su.d or system less root or dmverity.
What exact rom were you on when it worked?
I'm not home right now, but try extracting the stock kernel from the qb3 firmware.
Flash it then flash Super su again.
Then try the root switch.
Let me know if that does anything?
Click to expand...
Click to collapse
Im on pl1 build stock rooted odexd, all i did is odined pl1 and root it nothing else been done to it i will try what u recommended see if that works
---------- Post added at 05:36 PM ---------- Previous post was at 05:31 PM ----------
aaron74 said:
I managed to put together a fix to try. I'm just quessing but this will let me rule out if its related to the kernel.
Its stock PK1 Kernel (all i have on phone right now).
Download it,
Uninstall the Root switch app.
Flash the kernel zip. Reboot!
Then install Root switch.
Let me know if it works. :fingers-crossed:
EDIT- SEE Post BELOW!!
Click to expand...
Click to collapse
I can post screeny of the safety net so you can see what message comes up when i turn root off on my setup and i can play pokemon and than ill take one of the safety net with your rom maybe that will give you some details ,once again im not applying any pressure on you at all like i said before its no biggie i was just wondering if it could be something simple than why not have the latest rom and still be able to play pokemon
These are from my own setup stock pl1 build stock everything root turned off is green turned on is red im going to upload screenies on your rom in different post so i dont confuse you and after than ill try the fix you suggested .
bigbabo said:
These are from my own setup stock pl1 build stock everything root turned off is green turned on is red im going to upload screenies on your rom in different post so i dont confuse you and after than ill try the fix you suggested .
Click to expand...
Click to collapse
You are running stock kernel right?
And also, you are NOT running xposed?
This is the only way i know to get Safetynet green.
The dev from Magisk is working real hard to let us keep root on for Safetynet Passing, but on the xposed side we still have that big problem.
carlosggb said:
You are running stock kernel right?
And also, you are NOT running xposed?
This is the only way i know to get Safetynet green.
The dev from Magisk is working real hard to let us keep root on for Safetynet Passing, but on the xposed side we still have that big problem.
Click to expand...
Click to collapse
No xposed just stock everything like if i took ota and than rooted it than i use root switch app and turn root off and voila pokemon works like im not rooted but on this build when i turn root off with that app and try the pokemon it doesnt work so im about to try to flash the pk1 kernel with this new build and see if that works

[ROM] TeleNougat V4.5

TeleNougat V4.5 for Sprint
@tdunham managed to get the stock deodexed Nougat rom which is based on the Sprint QC5 7.0 Nougat Note 5. I have everything tweaked in this rom specifically for the s6+ Sprint users.
"Features:
- Pre-Rooted with Magisk
- Hotspot enabled
- Knox Removed
- ItsOn Removed
- Extra Toggles added
- MSL disabled in ##DATA menu"
- S8 Apps:
Calculator/Calendar/Camera/Clock/Contacts/DownloadUi/Email/Galaxyapps/Gallery/Launcher feat. Hello Bixby/Lockscreen/Phone/SamsungInterent/Messages/Music/MyFiles/Phone/Video/Voicerecorder
Known Issues
1. language settings inside of Language and Input fc. (the issue is in systemui if someone wants to play around with it, may not get fixed anytime soon since no one really changes it from english anyway.
2. Hello Bixby app (uncheck video to not get a fc)
3. Night Clock and AOD doesnt work (due to kerne)
ROM INFO
Since this is stock based, everything Sprint related works. (prl, profile update, wifi calling, voicemail)
Personally prefer you to be on QC5 everything first (check general section in you need help odin to Nougat stock.)
Fresh wiped phone is always preferred before installing roms.
Flashing tutorial if needed:
1. Grab a cold one. (Key step)
2. Boot into twrp and WIPE SYSTEM, dalvik cache, cache in TWRP before flashing
3. Flash rom
4. Reboot
*dont forget that Android 7.0 is API 24 which means XPOSED will not work, there isn't an unofficial or official build for it yet.*
Rom Links:
V2 TeleNougat_V2Final4/20
V3 TeleNougat_V3
V4 TeleNougatV4_4/27Build
V4.5 TeleNougat4.5
V4.5 changelog: since noone has been complaing about the test 4.5, here it is. Bixby is pretty much perfect (if fc, clear data/cache for the app) + a few sammy updates (NOTHING MAJOR FROM 4)
V4 changelog: updated ALL SAMSUNG APPS, added samsung members, samsung flow, reminder app, added media ui sounds for rom, Galaxy themes fixed, briefing tab in Bixby working, bootscreen, few edits in build prop.
V3 changelog: updated touchwiz, calendar, clock app, s8 ringtones & media, calculator, phone app, shealth root fix, etc from S8 port base.
V2 changelog: NewStuffAddons is now built in, debloated system, s8 lockscreen, more stock features in stock mms app, no fc for device maintenance (smart manager), 3mini battery/clock, etc.
V1 changelog: Stock Deodexed
Credits:
@SuperR. for the rom kitchen and his ongoing support
@topjohnwu For Magisk root"
@tdunham for deox rom
@Jacobh25 for S8 apps, etc
SlidderG3, MorganTaylor, and others for troubleshooting and help
For discussion and updates join https://telegram.me/n7ton920p
“I don’t always drink, but when I do, I prefer dark liq”
https://www.paypal.com/cgi-bin/websc...=QJDY6W6PGBEAJ
Reserved
RESERVED
Everything is working great. I dirty flashed, though, being on QC5 already is why I did. Saved time from setting everything back up again.
Yuwei01 said:
Everything is working great. I dirty flashed, though, being on QC5 already is why I did. Saved time from setting everything back up again.
Click to expand...
Click to collapse
Glad to hear, yea if you are already on nougat, i usually only wipe /system in twrp since im flashing another system that way all my settings still there and its a lil cleanier to me. But lemme know how battery life is after a day or 2.
your file only 137 kb
SM-G928P_QC5_Deodexed_v1.1.zip"]SM-G928P_QC5_Deodexed_v1.1.zip
your file only 137 kb, i can not download your file in china ,can you upload it to mega or google drive
@bihailantian655
They are both on mediafire. They are 1.65GB and 70mb for the addon
Others have it downloaded already (the links are good, i just rechecked them) , try refreshing? Or redownloading.
thank very much. testing
l have tried two different pc and two vpn. :crying:137kb :crying:
Just Curious?
Do you think there's a possibility of something like this being ported over to the standard galaxy s6 (SM-G920P). I just happened to stumble upon this while doing some google searches.
even i have flashed the 70m file still .can not use data and shealth
AlienMerc said:
Do you think there's a possibility of something like this being ported over to the standard galaxy s6 (SM-G920P). I just happened to stumble upon this while doing some google searches.
Click to expand...
Click to collapse
I doubt it, though you could try, ive never messed with s6 Devices 920P.
Question to OP or anyone who would like to give feedback: If I Backup my Stock-Rooted(SU) in TWRP, then decided to use this ROM, and then also Backup this Rom. Should there be any issues on going back and fourth between the 2? Thanks in advance to anyone willing to give me feedback on this!
SprintBama said:
Question to OP or anyone who would like to give feedback: If I Backup my Stock-Rooted(SU) in TWRP, then decided to use this ROM, and then also Backup this Rom. Should there be any issues on going back and fourth between the 2? Thanks in advance to anyone willing to give me feedback on this!
Click to expand...
Click to collapse
No I didn't have any issues when I'd swapped backups. :good:
Custom Rom QC5
Yuwei01 said:
Everything is working great. I dirty flashed, though, being on QC5 already is why I did. Saved time from setting everything back up again.
Click to expand...
Click to collapse
Do I have to be rooted to flash this ROM ? I am on Stock QC5 .
Thanks.
Mulzac said:
Do I have to be rooted to flash this ROM ? I am on Stock QC5 .
Thanks.
Click to expand...
Click to collapse
Yes, if you install twrp without rooting with the Magisk-v12.0 zip. Stock recovery will replace twrp recovery at least it did for me. If you try to install this Rom without root in twrp I believe your get a not rooted error. You could try it? And also that Rom is prerooted FYI.
Is there a way to add Avatar for sent messages? I tried frash install and still no luck
Great Rom, Thank you!
SM-G928P Custom NougatFirmware G928PVPU3DQC5
drewiskee said:
RESERVED
Click to expand...
Click to collapse
I flashed the ROM and everything is working great, but how do I get rid of Sprint Hands Free Activation in the installed GT Idoneapps.
When I click on Samsung DM Manager all I get is :" idoneapps is granted super user rights. No permissions to enter OMADM Hidden menu"
Thanks Again .......great rom
Mulzac said:
I flashed the ROM and everything is working great, but how do I get rid of Sprint Hands Free Activation in the installed GT Idoneapps.
When I click on Samsung DM Manager all I get is :" idoneapps is granted super user rights. No permissions to enter OMADM Hidden menu"
Thanks Again .......great rom
Click to expand...
Click to collapse
what are you trying to do exactly?
Maybe that will help me. I clicked it and it said the same for me
So far so good. Is there any way to disable the data usage stats on pull down? I have unlimited and don't need it. It will just bug me. Thanks a bunch
EDIT: I figured this one out myself. I am including the change in case anyone else wants the data stats removed from quick settings.
1) use ES File explorer or another root explorer.
2) copy others.Xml from "system/ csc"
3) change permissions (not sure if needed but just to be safe)
4) edit others.xml. Near bottom are the new entries for mod and I just changed <CscFeature_SystemUI_SupportDataUsageViewOnQuickPanel>FALSE</CscFeature_SystemUI_SupportDataUsageViewOnQuickPanel>. Was originally true.
5) copy over the existing file
6) reboot
7) profit.
Thanks for Rom. can't wait to get it just the way I want.
drewiskee said:
Glad to hear, yea if you are already on nougat, i usually only wipe /system in twrp since im flashing another system that way all my settings still there and its a lil cleanier to me. But lemme know how battery life is after a day or 2.
Click to expand...
Click to collapse
The Rom hasn't had a battery drain impact in anyway for me. Thanks again it's running buttery smooth.

Stock Rom T835 [ARK4] DeKnoxed

hello,
I made this TWRP flashable zip from December ARK4 Samsung firmware, using SuperRKitchen. It's deKnoxed and untouched apart from the lightest of debloated apps. Everything else is untouched and as per Samsung firmware. No root is included or any other mods or additions. I made this for myself, but offer it here for any interested parties. I'm not a dev, script warrior or ROM master. Just a guy with a T835. I was already on ARK4, but I include the ARK4 vendor image if you need to flash in twrp. It's v4 as it took me 3 attempts to make it! You just need to flash Magisk and/or Modesty Kernel if you want.
ROM - https://drive.google.com/open?id=14CokHkIahzI_Rk3OR2TgErqy8bgVF9br
ARK4 Vendor image: https://drive.google.com/open?id=1dgV-KDBZw7EeCnWcHozR-vx4oKdNG7Ee
Modesty Kernel: https://forum.xda-developers.com/galaxy-tab-s4/development/kernel-modesty-0-99-4-t3856088
Magisk: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
I don't get my tab s4 until tomorrow, but I'd like to thank you for making this. I know I'll end up using this when I inevitably screw up using one of the roots or debloats.
simcop2387 said:
I don't get my tab s4 until tomorrow, but I'd like to thank you for making this. I know I'll end up using this when I inevitably screw up using one of the roots or debloats.
Click to expand...
Click to collapse
You're welcome. It's a great tablet. My first Samsung device after nexus' - very impressed with this tab
do You think this will work on a 830 and :
could you give step by step how to install it.
thanks
marvinc said:
do You think this will work on a 830 and :
could you give step by step how to install it.
thanks
Click to expand...
Click to collapse
I'm not sure - but would think it doesn't. You can try though, just back up before you do and restore if not
To flash ROM you'll need TWRP installed. https://forum.xda-developers.com/ga.../recovery-twrp-3-2-3-1-galaxy-tab-s4-t3843211.
Once TWRP is installed and working, wipe system, data etc
Then flash the ROM zip
Flash kernel & Magisk if you require
Thank you OP! Can you please help me understand, what does deknoxed mean? I know Knox is Samsung security, but what would deknoxed be? Less bloat or some functional advantage?
Removing the knox app that may inhibit root manger or interfering with system apps. It
Thank you for your efforts. Having rooted I had a rigmarole to go thru to apply this update. It was so easy, just flashed with TWRP and I still had root, TWRP, and all my apps data and settings.
I hope that you will do the same for further firmware updates as they come out.
Again thanks for your efforts!
Are you doing Pie version as well?
THanks
Sure, as soon as the sammobile site as th UK firmware I'll dig one out
There is one for Hong Kong and one Unknown. Are you able to provide some basic instructions on how to brew the custom firmware please?
Thanks
All links are not working. Does anybody have mirror on this ROM or another ROM based on Android 8 for TWRP?

Which Roms can be installed with QI15 firmware

I have purchased yet another note 4 for the grandson. His firmware is QI15. Original plan was for me to use it, but since my Pixel 3a XL is still yet a lease I might as well use it. Plus it is a lot faster anyway.. His mother does not have the money to buy one for him, so I figured what the hell, he can have it.Which roms can he use.. I no longer have mine, but will root this if it is still possible.. From reading you can't downgrade from MM to LL. But can you downgrade to a earlier version of MM? Thanks.
inYes, that is correct but also cant downgrade the bootloader/modem. That is because of fused 5, binary 4. and te old official stock 5DQ15 .tar md5 can be fashed via Odin. Any other stock firmware below that has a fused 4 and flashing will result in a bricked device.
If your already on 5DQ15 and wish to flash customer roms then use TWRP and make a back up of all partitions to external sd. The any custom rom for Sprint Note 4 (sm-n910p) on Marshmallow are/should compatible. Basically, follow the instructions provided by the rom developer but do not flash a different bootloader or modem. Other than that follow all other institution. For best results, start in setting , sustem update and turm of automatic updates then update PRL and Profile beforehand. Developer Option and usb debugging enabled.
Rooting the Sprint Note 4 on 5DQ15 still possible? Yes 100% SuperSu or Magisk are the preferred root methods.
---------- Post added at 08:42 AM ---------- Previous post was at 08:16 AM ----------
[/COLOR]https://forum.xda-developers.com/no...are-customizations-mods-roms-kernels-t3960353
Also recommend you start with a stock deodexed rom as a base before flashing other custom roms. Rom only
https://forum.xda-developers.com/no...tock-deodexed-debloated-pk1-12-11-16-t3517454
or
https://forum.xda-developers.com/note-4-sprint/development/rom-t3568075
then reboot and give it time to properly set up set up. Check if hotspot is visible setting and check your apn settings. If all looks good and it should the return to TWRP and once again make a back up and rename (2019-10-05-deodexStockNoroot.....) so not to be mistaken with any other backups. After that flash root .zip and/or a custum rom of you choice.
I use the BeastMod r61 kernel by Freeza on a N4 Dtux V9 Legend rom. Fixed issues with network connection.
https://forum.xda-developers.com/note-4-sprint/development/rom-updated-1-14-2017-t3538051
Mr. JAVI said:
inYes, that is correct but also cant downgrade the bootloader/modem. That is because of fused 5, binary 4. and te old official stock 5DQ15 .tar md5 can be fashed via Odin. Any other stock firmware below that has a fused 4 and flashing will result in a bricked device.
If your already on 5DQ15 and wish to flash customer roms then use TWRP and make a back up of all partitions to external sd. The any custom rom for Sprint Note 4 (sm-n910p) on Marshmallow are/should compatible. Basically, follow the instructions provided by the rom developer but do not flash a different bootloader or modem. Other than that follow all other institution. For best results, start in setting , sustem update and turm of automatic updates then update PRL and Profile beforehand. Developer Option and usb debugging enabled.
Rooting the Sprint Note 4 on 5DQ15 still possible? Yes 100% SuperSu or Magisk are the preferred root methods.
---------- Post added at 08:42 AM ---------- Previous post was at 08:16 AM ----------
[/COLOR]https://forum.xda-developers.com/no...are-customizations-mods-roms-kernels-t3960353
Also recommend you start with a stock deodexed rom as a base before flashing other custom roms. Rom only
https://forum.xda-developers.com/no...tock-deodexed-debloated-pk1-12-11-16-t3517454
or
https://forum.xda-developers.com/note-4-sprint/development/rom-t3568075
then reboot and give it time to properly set up set up. Check if hotspot is visible setting and check your apn settings. If all looks good and it should the return to TWRP and once again make a back up and rename (2019-10-05-deodexStockNoroot.....) so not to be mistaken with any other backups. After that flash root .zip and/or a custum rom of you choice.
I use the BeastMod r61 kernel by Freeza on a N4 Dtux V9 Legend rom. Fixed issues with network connection.
https://forum.xda-developers.com/note-4-sprint/development/rom-updated-1-14-2017-t3538051
Click to expand...
Click to collapse
you know what sucks, my last note 4 for Sprint hell I was able to downgrade from marshmallow to lollipop. But since this is for the grandson I guess it really doesn't matter I'll put something on there good for him and leave it at that
doubledragon5 said:
you know what sucks, my last note 4 for Sprint hell I was able to downgrade from marshmallow to lollipop. But since this is for the grandson I guess it really doesn't matter I'll put something on there good for him and leave it at that
Click to expand...
Click to collapse
I 100% agree that not being able to downgrade sucks big time. I hear all the hipe about new Android OS updates but there are advantages of older versions. In 2018, I searched for a replacement with a lower bootloader but simply couldn't find one. Knowing that peope were bricking there device and Odin fails I decided to get one in fair condition. Being the type to mod and flash yet unsure of what ir how to do that as custom roms are specific to bootloader and modem. I figured, I'll practice with a cheap on incase I hard brick. At the time there didnt seem to be specific information on what rom worked with 5DQ15. I started out with Stockist Plus tidbits Q15. My old Note 4 was on [MOAR v2.1] [ULTIMATE Note5 Hybrid] on lollipop 5.1.1. and had lost of customizations prebuild. So going from the Mother Of All Roms (MOAR) on lollipop to Stockish Q15 on marshmallow, just sucked. It didnt take long before I started taking calculated risks with flashing and porting, even from other models and variations. Stepping out side the box but within boundaries. For instance, the n910f is an international version but much of its software is compatible with the n910p. For instance, this one works on n910p with most stockish roms on Sprint Note 4. With Custum roms it may conflict depending on the setting. If stockish rom or custom rom come with a "rom control"app (interface) and .zip in the link bellow come with "rom control" app thin it is not compatible. One cool feature is it adds "multiple user" in setting.
https://forum.xda-developers.com/note-4/themes-apps/utility-rom-control-note-4-stock-roms-t3586944
These n910f worked for me and has the advantage of separate .zips moding specific parts but warn that one of these .zip in the link , I believe its the "settings theme" .zip when flashed removes "hotspot" from the settings. Just 6.0mm zips are compatible on dq15 n010p.
https://forum.xda-developers.com/note-4/themes-apps/theme-customize-galaxy-note-4-n910f-t3017621
The GRX is one of my favorites for stockish roms. It can be compatible with custom roms but its a complicated process. Im guessing it should work with the N7 hybrid rom. Its relatively easy and offers nice smooth customizations. Its a good idea to chech the setting of both settem and "setting GRX" as to avoid conflict. If you find it on XDA even better. For me, I find it to be the best thing on 6.0mm.
https://www.google.com/amp/s/androidfit.com/grx-touchwiz-mod-v8-apk-for-any-samsung/amp
And the PK1 hotspot mod will work as long as the hotspot is in the main settings.
https://forum.xda-developers.com/no...tock-deodexed-debloated-pk1-12-11-16-t3517454
Good luck to you and your grandson rooting and moding.
Mr. JAVI said:
I 100% agree that not being able to downgrade sucks big time. I hear all the hipe about new Android OS updates but there are advantages of older versions. In 2018, I searched for a replacement with a lower bootloader but simply couldn't find one. Knowing that peope were bricking there device and Odin fails I decided to get one in fair condition. Being the type to mod and flash yet unsure of what ir how to do that as custom roms are specific to bootloader and modem. I figured, I'll practice with a cheap on incase I hard brick. At the time there didnt seem to be specific information on what rom worked with 5DQ15. I started out with Stockist Plus tidbits Q15. My old Note 4 was on [MOAR v2.1] [ULTIMATE Note5 Hybrid] on lollipop 5.1.1. and had lost of customizations prebuild. So going from the Mother Of All Roms (MOAR) on lollipop to Stockish Q15 on marshmallow, just sucked. It didnt take long before I started taking calculated risks with flashing and porting, even from other models and variations. Stepping out side the box but within boundaries. For instance, the n910f is an international version but much of its software is compatible with the n910p. For instance, this one works on n910p with most stockish roms on Sprint Note 4. With Custum roms it may conflict depending on the setting. If stockish rom or custom rom come with a "rom control"app (interface) and .zip in the link bellow come with "rom control" app thin it is not compatible. One cool feature is it adds "multiple user" in setting.
https://forum.xda-developers.com/note-4/themes-apps/utility-rom-control-note-4-stock-roms-t3586944
These n910f worked for me and has the advantage of separate .zips moding specific parts but warn that one of these .zip in the link , I believe its the "settings theme" .zip when flashed removes "hotspot" from the settings. Just 6.0mm zips are compatible on dq15 n010p.
https://forum.xda-developers.com/note-4/themes-apps/theme-customize-galaxy-note-4-n910f-t3017621
The GRX is one of my favorites for stockish roms. It can be compatible with custom roms but its a complicated process. Im guessing it should work with the N7 hybrid rom. Its relatively easy and offers nice smooth customizations. Its a good idea to chech the setting of both settem and "setting GRX" as to avoid conflict. If you find it on XDA even better. For me, I find it to be the best thing on 6.0mm.
https://www.google.com/amp/s/androidfit.com/grx-touchwiz-mod-v8-apk-for-any-samsung/amp
And the PK1 hotspot mod will work as long as the hotspot is in the main settings.
https://forum.xda-developers.com/no...tock-deodexed-debloated-pk1-12-11-16-t3517454
Good luck to you and your grandson rooting and moding.
Click to expand...
Click to collapse
your in-depth detail of what works good for this phone with this particular bootloader is much appreciated thanks.
doubledragon5 said:
your in-depth detail of what works good for this phone with this particular bootloader is much appreciated thanks.
Click to expand...
Click to collapse
Thank you and your welcome, happy to help
doubledragon5 said:
your in-depth detail of what works good for this phone with this particular bootloader is much appreciated thanks.
Click to expand...
Click to collapse
If you install Busybox with the N7 hybrid kernel I offer a suggestion.
Busybox by Stephen (Stericson)
I never installed the Dr. Ketan rom but I did look at the Touchwiz launcher provided in the .zip and it is a MM. Dont know why you got FC's . Most likely its our latest firmware that to blame.
Wish I could remember what it was I flashed to get that in my settings as I think I remember you wanted that feature.

Categories

Resources