Develop Bugs

[Q] huawei p6 baseband showing unknown/imei unknown

hi guys i have buyed my new ascend p6 and withn 7 days its baseband got flashed and showed baseband unknown and imei is also unknown
i dnt want to void the warranty of my mobile is their any way to recover???
plz help

Factory reset
Have you tried factory reset?

DonCarlosis said:
Have you tried factory reset?
Click to expand...
Click to collapse
yes i have already done all the things like factory reset

I've got the same problem.. IMEI lost after flashing P6 to MIUI ROM. Any info about any app that can repair it?
Is the IMEI of the P6 is on a rewritable memory? Or It's just can't be detected by the MIUI ROM?
I'll only receive the device today, so I couldn't check anything in it. But I think the first step will be to flash it back to a stock ROM...

Still no useful info about this problem?
I fleshed it to an official (B125) ROM, but have the same results. Could someone tell me the correct number of the official Kernel that the P6 was shipped with? As I already wrote I got it as a used phone with these modifications, so I've got no idea what did it look like in it's out of the box state.
Thanks!

Epsylon said:
Still no useful info about this problem?
I fleshed it to an official (B125) ROM, but have the same results. Could someone tell me the correct number of the official Kernel that the P6 was shipped with? As I already wrote I got it as a used phone with these modifications, so I've got no idea what did it look like in it's out of the box state.
Thanks!
Click to expand...
Click to collapse
Hello friend. Could you fix it?
I have the same problem
Please help!!!!

joanloes said:
Hello friend. Could you fix it?
I have the same problem
Please help!!!!
Click to expand...
Click to collapse
Same here! anything to do?

Unknown Baseband & Unknown IMEI Ascend P6
Urthemiel said:
Same here! anything to do?
Click to expand...
Click to collapse
Same problem, nothing yet...........???
From service center they said that, needed to change the motherboard....
Till now no writing tool for Ascend P6??
Any knows please help us
thanks in advance

Same problem also
Hi i have the Same problem also how to fix this plz help guys.Waiting for response.(IMEI NULL ERROR).

Hi dears;
I have same problem . how to fix it ?
Thanks

Same problem!
I have the same problem! I also need help fast! I want to use my Ascend P6 again! :crying:

U sholud chenge ic baseband for fix imei null.

hi all this worked for me you can try it too
okay guys you can try this it worked for me, download huawei update extractor and install it. also download minimal adb and fastboot and install it.
I'm not a pro at this so research how to install minimal adb and fastboot if you don't know how to.... after this you download a custom rom or stock rom for your device ( that is if you don't already have one) .....
if you have the zip file just extract modemimage.img and place it in the folder " minimal adb and fastboot" if you have an 'update.app' file then you will have to use huawei update extractor and extract the 'modemimage.img' file and place it in the folder " minimal adb and fastboot''. This folder is located at mycomputer/program files/minimal adb and fastboot.
Now, open adb fastboot via command prompt or click the shortcut on your desktop, type
" fastboot flash modemimage modemimage.img" and it should now say " waiting for device " . turn off your phone . when its off connect it to your computer, now press and hold the power and volume down button together until you see connected/okay on your pc screen . when its done flashing the file it should say okay. .. and thats about it.
Now turn on your phone and the service should be working now and you should see your imei and baseband is back.... if your wifi is not working just do a quick wipe/format from your twrp recovery and everything should be working fine. this worked for me hope it will for you too. Good Luck

garro said:
okay guys you can try this it worked for me, download huawei update extractor and install it. also download minimal adb and fastboot and install it.
I'm not a pro at this so research how to install minimal adb and fastboot if you don't know how to.... after this you download a custom rom or stock rom for your device ( that is if you don't already have one) .....
if you have the zip file just extract modemimage.img and place it in the folder " minimal adb and fastboot" if you have an 'update.app' file then you will have to use huawei update extractor and extract the 'modemimage.img' file and place it in the folder " minimal adb and fastboot''. This folder is located at mycomputer/program files/minimal adb and fastboot.
Now, open adb fastboot via command prompt or click the shortcut on your desktop, type
" fastboot flash modemimage modemimage.img" and it should now say " waiting for device " . turn off your phone . when its off connect it to your computer, now press and hold the power and volume down button together until you see connected/okay on your pc screen . when its done flashing the file it should say okay. .. and thats about it.
Now turn on your phone and the service should be working now and you should see your imei and baseband is back.... if your wifi is not working just do a quick wipe/format from your twrp recovery and everything should be working fine. this worked for me hope it will for you too. Good Luck
Click to expand...
Click to collapse
didn't work for me

I have the same problem.
No imei after flash

[Q] bricked my huawei ascend mate plzz HELP!!!

Hi could someone plz tell me how to unbrick my huawei ascend mate as i bricked it while installing a new custom rom and i dont have cwm or twrp so plz could someone tell me how to solve the problem? I really need HELP!!!!

hamzafoad said:
Hi could someone plz tell me how to unbrick my huawei ascend mate as i bricked it while installing a new custom rom and i dont have cwm or twrp so plz could someone tell me how to solve the problem? I really need HELP!!!!
Click to expand...
Click to collapse
details pls. soft brick, hard brick? does it start or just blackscreen, etc

wulfy1000 said:
details pls. soft brick, hard brick? does it start or just blackscreen, etc
Click to expand...
Click to collapse
Sorry for not adding that it is a hard brick as my phone is stuck on the logo and it does go into the normal recovery mode but i dont have cwm recoveryand when i turn it of it keeps on coming back to the logo by itself.

hamzafoad said:
Sorry for not adding that it is a hard brick as my phone is stuck on the logo and it does go into the normal recovery mode but i dont have cwm recoveryand when i turn it of it keeps on coming back to the logo by itself.
Click to expand...
Click to collapse
that is softbricked.update app on card and start phone with vol up+vol down

wulfy1000 said:
that is softbricked.update app on card and start phone with vol up+vol down
thanx for replying ok well i tried that it reads the update.app file but it then says instalation aborted and then it is written FAIL in the end.
Click to expand...
Click to collapse

hamzafoad said:
wulfy1000 said:
that is softbricked.update app on card and start phone with vol up+vol down
thanx for replying ok well i tried that it reads the update.app file but it then says instalation aborted and then it is written FAIL in the end.
Click to expand...
Click to collapse
download http://consumer.huawei.com/en/mobile-phones/support/downloads/detail/mt1-u06-en.htm?id=17790
then unrar. then u will see a folder "dload"
copy it on your external sdcard (with a pc)
preferably the sdcard must be empty and formated before
make sure the phone is of. insert sd card.
then pres power+vol up+vol down
it should work
Click to expand...
Click to collapse

wulfy1000 said:
hamzafoad said:
download http://consumer.huawei.com/en/mobile-phones/support/downloads/detail/mt1-u06-en.htm?id=17790
then unrar. then u will see a folder "dload"
copy it on your external sdcard (with a pc)
preferably the sdcard must be empty and formated before
make sure the phone is of. insert sd card.
then pres power+vol up+vol down
it should work
Click to expand...
Click to collapse
Sorry i shuld have mentioned this earlier iam actually using the huawei ascend mate (mt1-t00) while i think this rom is for the mt1-u06 version
Click to expand...
Click to collapse

hamzafoad said:
wulfy1000 said:
Sorry i shuld have mentioned this earlier iam actually using the huawei ascend mate (mt1-t00) while i think this rom is for the mt1-u06 version
Click to expand...
Click to collapse
i really need help plz culd someone help me
Click to expand...
Click to collapse

hamzafoad said:
hamzafoad said:
i really need help plz wi someone help me
Click to expand...
Click to collapse
Hi!
Please download from your HAM an stock firmware! Extract UPDATE.APP from this firmware and cpoy UPDATE.APP on your external sdcard in directory /dload. In your external sdcard you must see /dload/UPDATE.APP.
Now pot your sdcard on your device, ( make sure your device is not connected with USB cable !) press and keep at the same time : volume down, volume up & power button ! After awhile your device will be able to re-write your firmware from /dload/UPDATE.APP.
Good luck!
Click to expand...
Click to collapse

surdu_petru said:
hamzafoad said:
Hi!
Please download from your HAM an stock firmware! Extract UPDATE.APP from this firmware and cpoy UPDATE.APP on your external sdcard in directory /dload. In your external sdcard you must see /dload/UPDATE.APP.
Now pot your sdcard on your device, ( make sure your device is not connected with USB cable !) press and keep at the same time : volume down, volume up & power button ! After awhile your device will be able to re-write your firmware from /dload/UPDATE.APP.
Good luck!
Click to expand...
Click to collapse
i tried that and the process is going on untill it says
writing module MD5RSA...OK
writing module CRC......OK
writing module CURVER....OK
writing module VERLIST.......
Huawei usb update fail
cust copying files
copy cust files successed!
Click to expand...
Click to collapse

hamzafoad said:
surdu_petru said:
i tried that and the process is going on untill it says
writing module MD5RSA...OK
writing module CRC......OK
writing module CURVER....OK
writing module VERLIST.......
Huawei usb update fail
cust copying files
copy cust files successed!
Click to expand...
Click to collapse
Please remove USB cable to be able to flash stock firmware on stock recovery ! If you already tried to flash stock firmware without USB cable connected, than it looks like you need to go to service centre, because module VERLIST cannot be written on your device !
I was in the same situation, my issue was ( writing module SYSTEM failure ) !
Click to expand...
Click to collapse

surdu_petru said:
hamzafoad said:
Please remove USB cable to be able to flash stock firmware on stock recovery ! If you already tried to flash stock firmware without USB cable connected, than it looks like you need to go to service centre, because module VERLIST cannot be written on your device !
I was in the same situation, my issue was ( writing module SYSTEM failure ) !
Click to expand...
Click to collapse
so how did u fix it.
Click to expand...
Click to collapse

I would redownload the update.app. the zip could be corrupted. Also make sure when you unrar it use 7zip or winrar. Once i used the windows archiver and it wouldn't work.
Sent from my P6-U06 using xda app-developers app

Hi guys,
I have almost the same problem and reaaaaallly would love to get some help. I bricked the HAM during installation of CM10.1. Had root acces and TWRP, But now it just gets stuk in the HUAWEI ASCEND screen.
If I boot into huawei recovery it goes into boot look during and can't finsish installation!
Is there anything I can do?? Or is my phone dead?
Pleeaase advise

markteunis said:
Hi guys,
I have almost the same problem and reaaaaallly would love to get some help. I bricked the HAM during installation of CM10.1. Had root acces and TWRP, But now it just gets stuk in the HUAWEI ASCEND screen.
If I boot into huawei recovery it goes into boot look during and can't finsish installation!
Is there anything I can do?? Or is my phone dead?
Pleeaase advise
Click to expand...
Click to collapse
'' it goes into boot look during '' ? Please explain.

ZuperStyler said:
'' it goes into boot look during '' ? Please explain.
Click to expand...
Click to collapse
Sorry i meant it will get stuck in a Boot loop, it keeps restarting itself.
So it starts with the update and then it checks all the =ok but it only comes to SYSTEM and then it reboots itself.

markteunis said:
Sorry i meant it will get stuck in a Boot loop, it keeps restarting itself.
So it starts with the update and then it checks all the =ok but it only comes to SYSTEM and then it reboots itself.
Click to expand...
Click to collapse
Try this, and see if it works.
1. Make sure the SD card is formatted as fat32.
2. Redownload the UPDATE.APP
3. Make sure when you are doing the update make sure your HAM is not connected to the PC via USB cable.
If these don't work, go into recovery and choose wipe cache/factory reset. Try rebooting and see if anything happens.

bokchoi2020 said:
Try this, and see if it works.
1. Make sure the SD card is formatted as fat32.
2. Redownload the UPDATE.APP
3. Make sure when you are doing the update make sure your HAM is not connected to the PC via USB cable.
If these don't work, go into recovery and choose wipe cache/factory reset. Try rebooting and see if anything happens.
Click to expand...
Click to collapse
Thanks I tried both with no succes
If I go in huawei recovery by pressing Power + volume up +volume down and do a full wipe HAM will reboot itself automatically after 10 secs still get stuck in Boot screen Huawei Ascend after reboot.
I formatted the SD and put the Update.app in dload folder. HAM is not connected to PC. Still it comes no further then checking system before it switches itself off agian.
I am getting desperate Thanks for the help so far:highfive:

Still have problem, nothing seems to work!
Anybody else that might be able to help?

BTW. Anyone tested if multiloader works on soft bricked phones:
http://forum.xda-developers.com/showthread.php?t=2618253

plz help asus fonepad fe170cg

hi guys .
i have ASUS_Fonepad 7 Dual SIM_FE170CG
a have some problems
i cant update fonepad via wifi . just manual flash
i download new FW from asus site
sup**port.asus.com/download.aspx?SLanguage=en&p=28&s=7&m=ASUS%20Fonepad%207%20(FE170CG)&os=&hashedid=K0zj5cW6VJEzTjQR
but when change frimware name to asus_bundle.zip and copy from sd card and power off up volume and power on go to recovery mode . when set sd download . say that
"unable to write /cache/recovery /command file!
installing demo content
no detect apd image file.skip
error: cant find image file"
how to sloved a problem with manual flash ?
i check WW SKU
please helpppp meeeee
thanks

same problem. please help.:crying:
aymenopa said:
hi guys .
i have ASUS_Fonepad 7 Dual SIM_FE170CG
a have some problems
i cant update fonepad via wifi . just manual flash
i download new FW from asus site
sup**port.asus.com/download.aspx?SLanguage=en&p=28&s=7&m=ASUS%20Fonepad%207%20(FE170CG)&os=&hashedid=K0zj5cW6VJEzTjQR
but when change frimware name to asus_bundle.zip and copy from sd card and power off up volume and power on go to recovery mode . when set sd download . say that
"unable to write /cache/recovery /command file!
installing demo content
no detect apd image file.skip
error: cant find image file"
how to sloved a problem with manual flash ?
i check WW SKU
please helpppp meeeee
thanks
Click to expand...
Click to collapse

Same problem. Someone can help!
bajingku said:
same problem. please help.:crying:
Click to expand...
Click to collapse
Someone can help please.

Asus fonepad 7 me371mg (k004) stuck on usb logo after bad flash, can't unbrick

Hi everybody,
i have a serious problem with an asus fonepad 7 me371mg model (k004) , basically after trying to flash a custom rom i bricked the phone and now i don't know how to take it back to life , as it is stuck un the usb logo.. no recovery , no droidboot.
i need your help
if someone have the same phone please help me to rebuild it from scratch:crying:
i think the internal partition table is damaged so it needs to be rebuilt.
i have a copy of the stock rom downloaded from the asus website but it's a zip file containing a .Raw file, i would like to extract the boot.img droidboot.img splash.bin system.bin and so on... unfortunately i don't know how to extract those files from the raw file.
Any information will be welcome cause i really don't know where to start from.
the device can only be detected as medfield devices bot i don't have the necessary files to flash the phone with xfstk or similar programs.
Thanks to everybody wanna help me

any budy help me

if your k004 stay at "no usb cable connected!" here is the solution
search and download this file "ME371MG_all_TW_user_V3.2.3-2.raw"
put it into sd card and insert it to k004
turn your k004 off
push "volume+" and "power" together > show "ASUS logo" STILL PUSH> show "no usb cable connected!" > release both button
push "volume+" and "volume-" together > show "DROIDBOOT" > select "SD DOWNLOAD"
choice the file "ME371MG_all_TW_user_V3.2.3-2.raw" > pray
wait till it done~
good luck

brainbooster said:
hi everybody,
i have a serious problem with an asus fonepad 7 me371mg model (k004) , basically after trying to flash a custom rom i bricked the phone and now i don't know how to take it back to life , as it is stuck un the usb logo.. No recovery , no droidboot.
I need your help
if someone have the same phone please help me to rebuild it from scratch:crying:
I think the internal partition table is damaged so it needs to be rebuilt.
I have a copy of the stock rom downloaded from the asus website but it's a zip file containing a .raw file, i would like to extract the boot.img droidboot.img splash.bin system.bin and so on... Unfortunately i don't know how to extract those files from the raw file.
Any information will be welcome cause i really don't know where to start from.
The device can only be detected as medfield devices bot i don't have the necessary files to flash the phone with xfstk or similar programs.
Thanks to everybody wanna help me
Click to expand...
Click to collapse
i have the same trouble.

Need fw dnx ifwi os dnx os image files for asus k004 me371mg

Hardware brick too!
need dnx ifwi os dnx os image files for asus k004 me371mg

Tcl p725 43inch middle east (Iraq) Firmware required

Hi guys!
I have a TCL P725 43inch Android 11 Smart Tv, all of a sudden it showed me the Android Recovery Mode, I tried to restart it but it never restart, tried wipe data and cache too n foramt it then I tried to reboot it again but it never boot up or restart, it's just stuck on this screen in the picture..
Can I download a firmware update for it? By choosing the apply update from SD card option or flash?
Is that possible
If possible, please provide me the link for the right firmware so I can download it!
Tcl p725 43inch android tv model (middle east - Iraq)

First step unplug TV from power for 30 min.
Try TV ON again.
If you want to flash recovery firmware you must use IMG file.
Look for V272 IMG (Android 11) in thread you also posted.
You can also used Google TV IMG file....V427 or V435.