hi guys i have buyed my new ascend p6 and withn 7 days its baseband got flashed and showed baseband unknown and imei is also unknown
i dnt want to void the warranty of my mobile is their any way to recover???
plz help
Factory reset
Have you tried factory reset?
DonCarlosis said:
Have you tried factory reset?
Click to expand...
Click to collapse
yes i have already done all the things like factory reset
I've got the same problem.. IMEI lost after flashing P6 to MIUI ROM. Any info about any app that can repair it?
Is the IMEI of the P6 is on a rewritable memory? Or It's just can't be detected by the MIUI ROM?
I'll only receive the device today, so I couldn't check anything in it. But I think the first step will be to flash it back to a stock ROM...
Still no useful info about this problem?
I fleshed it to an official (B125) ROM, but have the same results. Could someone tell me the correct number of the official Kernel that the P6 was shipped with? As I already wrote I got it as a used phone with these modifications, so I've got no idea what did it look like in it's out of the box state.
Thanks!
Epsylon said:
Still no useful info about this problem?
I fleshed it to an official (B125) ROM, but have the same results. Could someone tell me the correct number of the official Kernel that the P6 was shipped with? As I already wrote I got it as a used phone with these modifications, so I've got no idea what did it look like in it's out of the box state.
Thanks!
Click to expand...
Click to collapse
Hello friend. Could you fix it?
I have the same problem
Please help!!!!
joanloes said:
Hello friend. Could you fix it?
I have the same problem
Please help!!!!
Click to expand...
Click to collapse
Same here! anything to do?
Unknown Baseband & Unknown IMEI Ascend P6
Urthemiel said:
Same here! anything to do?
Click to expand...
Click to collapse
Same problem, nothing yet...........???
From service center they said that, needed to change the motherboard....
Till now no writing tool for Ascend P6??
Any knows please help us
thanks in advance
Same problem also
Hi i have the Same problem also how to fix this plz help guys.Waiting for response.(IMEI NULL ERROR).
Hi dears;
I have same problem . how to fix it ?
Thanks
Same problem!
I have the same problem! I also need help fast! I want to use my Ascend P6 again! :crying:
U sholud chenge ic baseband for fix imei null.
hi all this worked for me you can try it too
okay guys you can try this it worked for me, download huawei update extractor and install it. also download minimal adb and fastboot and install it.
I'm not a pro at this so research how to install minimal adb and fastboot if you don't know how to.... after this you download a custom rom or stock rom for your device ( that is if you don't already have one) .....
if you have the zip file just extract modemimage.img and place it in the folder " minimal adb and fastboot" if you have an 'update.app' file then you will have to use huawei update extractor and extract the 'modemimage.img' file and place it in the folder " minimal adb and fastboot''. This folder is located at mycomputer/program files/minimal adb and fastboot.
Now, open adb fastboot via command prompt or click the shortcut on your desktop, type
" fastboot flash modemimage modemimage.img" and it should now say " waiting for device " . turn off your phone . when its off connect it to your computer, now press and hold the power and volume down button together until you see connected/okay on your pc screen . when its done flashing the file it should say okay. .. and thats about it.
Now turn on your phone and the service should be working now and you should see your imei and baseband is back.... if your wifi is not working just do a quick wipe/format from your twrp recovery and everything should be working fine. this worked for me hope it will for you too. Good Luck
garro said:
okay guys you can try this it worked for me, download huawei update extractor and install it. also download minimal adb and fastboot and install it.
I'm not a pro at this so research how to install minimal adb and fastboot if you don't know how to.... after this you download a custom rom or stock rom for your device ( that is if you don't already have one) .....
if you have the zip file just extract modemimage.img and place it in the folder " minimal adb and fastboot" if you have an 'update.app' file then you will have to use huawei update extractor and extract the 'modemimage.img' file and place it in the folder " minimal adb and fastboot''. This folder is located at mycomputer/program files/minimal adb and fastboot.
Now, open adb fastboot via command prompt or click the shortcut on your desktop, type
" fastboot flash modemimage modemimage.img" and it should now say " waiting for device " . turn off your phone . when its off connect it to your computer, now press and hold the power and volume down button together until you see connected/okay on your pc screen . when its done flashing the file it should say okay. .. and thats about it.
Now turn on your phone and the service should be working now and you should see your imei and baseband is back.... if your wifi is not working just do a quick wipe/format from your twrp recovery and everything should be working fine. this worked for me hope it will for you too. Good Luck
Click to expand...
Click to collapse
didn't work for me
I have the same problem.
No imei after flash
Related
Hi could someone plz tell me how to unbrick my huawei ascend mate as i bricked it while installing a new custom rom and i dont have cwm or twrp so plz could someone tell me how to solve the problem? I really need HELP!!!!
hamzafoad said:
Hi could someone plz tell me how to unbrick my huawei ascend mate as i bricked it while installing a new custom rom and i dont have cwm or twrp so plz could someone tell me how to solve the problem? I really need HELP!!!!
Click to expand...
Click to collapse
details pls. soft brick, hard brick? does it start or just blackscreen, etc
wulfy1000 said:
details pls. soft brick, hard brick? does it start or just blackscreen, etc
Click to expand...
Click to collapse
Sorry for not adding that it is a hard brick as my phone is stuck on the logo and it does go into the normal recovery mode but i dont have cwm recoveryand when i turn it of it keeps on coming back to the logo by itself.
hamzafoad said:
Sorry for not adding that it is a hard brick as my phone is stuck on the logo and it does go into the normal recovery mode but i dont have cwm recoveryand when i turn it of it keeps on coming back to the logo by itself.
Click to expand...
Click to collapse
that is softbricked.update app on card and start phone with vol up+vol down
wulfy1000 said:
that is softbricked.update app on card and start phone with vol up+vol down
thanx for replying ok well i tried that it reads the update.app file but it then says instalation aborted and then it is written FAIL in the end.
Click to expand...
Click to collapse
hamzafoad said:
wulfy1000 said:
that is softbricked.update app on card and start phone with vol up+vol down
thanx for replying ok well i tried that it reads the update.app file but it then says instalation aborted and then it is written FAIL in the end.
Click to expand...
Click to collapse
download http://consumer.huawei.com/en/mobile-phones/support/downloads/detail/mt1-u06-en.htm?id=17790
then unrar. then u will see a folder "dload"
copy it on your external sdcard (with a pc)
preferably the sdcard must be empty and formated before
make sure the phone is of. insert sd card.
then pres power+vol up+vol down
it should work
Click to expand...
Click to collapse
wulfy1000 said:
hamzafoad said:
download http://consumer.huawei.com/en/mobile-phones/support/downloads/detail/mt1-u06-en.htm?id=17790
then unrar. then u will see a folder "dload"
copy it on your external sdcard (with a pc)
preferably the sdcard must be empty and formated before
make sure the phone is of. insert sd card.
then pres power+vol up+vol down
it should work
Click to expand...
Click to collapse
Sorry i shuld have mentioned this earlier iam actually using the huawei ascend mate (mt1-t00) while i think this rom is for the mt1-u06 version
Click to expand...
Click to collapse
hamzafoad said:
wulfy1000 said:
Sorry i shuld have mentioned this earlier iam actually using the huawei ascend mate (mt1-t00) while i think this rom is for the mt1-u06 version
Click to expand...
Click to collapse
i really need help plz culd someone help me
Click to expand...
Click to collapse
hamzafoad said:
hamzafoad said:
i really need help plz wi someone help me
Click to expand...
Click to collapse
Hi!
Please download from your HAM an stock firmware! Extract UPDATE.APP from this firmware and cpoy UPDATE.APP on your external sdcard in directory /dload. In your external sdcard you must see /dload/UPDATE.APP.
Now pot your sdcard on your device, ( make sure your device is not connected with USB cable !) press and keep at the same time : volume down, volume up & power button ! After awhile your device will be able to re-write your firmware from /dload/UPDATE.APP.
Good luck!
Click to expand...
Click to collapse
surdu_petru said:
hamzafoad said:
Hi!
Please download from your HAM an stock firmware! Extract UPDATE.APP from this firmware and cpoy UPDATE.APP on your external sdcard in directory /dload. In your external sdcard you must see /dload/UPDATE.APP.
Now pot your sdcard on your device, ( make sure your device is not connected with USB cable !) press and keep at the same time : volume down, volume up & power button ! After awhile your device will be able to re-write your firmware from /dload/UPDATE.APP.
Good luck!
Click to expand...
Click to collapse
i tried that and the process is going on untill it says
writing module MD5RSA...OK
writing module CRC......OK
writing module CURVER....OK
writing module VERLIST.......
Huawei usb update fail
cust copying files
copy cust files successed!
Click to expand...
Click to collapse
hamzafoad said:
surdu_petru said:
i tried that and the process is going on untill it says
writing module MD5RSA...OK
writing module CRC......OK
writing module CURVER....OK
writing module VERLIST.......
Huawei usb update fail
cust copying files
copy cust files successed!
Click to expand...
Click to collapse
Please remove USB cable to be able to flash stock firmware on stock recovery ! If you already tried to flash stock firmware without USB cable connected, than it looks like you need to go to service centre, because module VERLIST cannot be written on your device !
I was in the same situation, my issue was ( writing module SYSTEM failure ) !
Click to expand...
Click to collapse
surdu_petru said:
hamzafoad said:
Please remove USB cable to be able to flash stock firmware on stock recovery ! If you already tried to flash stock firmware without USB cable connected, than it looks like you need to go to service centre, because module VERLIST cannot be written on your device !
I was in the same situation, my issue was ( writing module SYSTEM failure ) !
Click to expand...
Click to collapse
so how did u fix it.
Click to expand...
Click to collapse
I would redownload the update.app. the zip could be corrupted. Also make sure when you unrar it use 7zip or winrar. Once i used the windows archiver and it wouldn't work.
Sent from my P6-U06 using xda app-developers app
Hi guys,
I have almost the same problem and reaaaaallly would love to get some help. I bricked the HAM during installation of CM10.1. Had root acces and TWRP, But now it just gets stuk in the HUAWEI ASCEND screen.
If I boot into huawei recovery it goes into boot look during and can't finsish installation!
Is there anything I can do?? Or is my phone dead?
Pleeaase advise
markteunis said:
Hi guys,
I have almost the same problem and reaaaaallly would love to get some help. I bricked the HAM during installation of CM10.1. Had root acces and TWRP, But now it just gets stuk in the HUAWEI ASCEND screen.
If I boot into huawei recovery it goes into boot look during and can't finsish installation!
Is there anything I can do?? Or is my phone dead?
Pleeaase advise
Click to expand...
Click to collapse
'' it goes into boot look during '' ? Please explain.
ZuperStyler said:
'' it goes into boot look during '' ? Please explain.
Click to expand...
Click to collapse
Sorry i meant it will get stuck in a Boot loop, it keeps restarting itself.
So it starts with the update and then it checks all the =ok but it only comes to SYSTEM and then it reboots itself.
markteunis said:
Sorry i meant it will get stuck in a Boot loop, it keeps restarting itself.
So it starts with the update and then it checks all the =ok but it only comes to SYSTEM and then it reboots itself.
Click to expand...
Click to collapse
Try this, and see if it works.
1. Make sure the SD card is formatted as fat32.
2. Redownload the UPDATE.APP
3. Make sure when you are doing the update make sure your HAM is not connected to the PC via USB cable.
If these don't work, go into recovery and choose wipe cache/factory reset. Try rebooting and see if anything happens.
bokchoi2020 said:
Try this, and see if it works.
1. Make sure the SD card is formatted as fat32.
2. Redownload the UPDATE.APP
3. Make sure when you are doing the update make sure your HAM is not connected to the PC via USB cable.
If these don't work, go into recovery and choose wipe cache/factory reset. Try rebooting and see if anything happens.
Click to expand...
Click to collapse
Thanks I tried both with no succes
If I go in huawei recovery by pressing Power + volume up +volume down and do a full wipe HAM will reboot itself automatically after 10 secs still get stuck in Boot screen Huawei Ascend after reboot.
I formatted the SD and put the Update.app in dload folder. HAM is not connected to PC. Still it comes no further then checking system before it switches itself off agian.
I am getting desperate Thanks for the help so far:highfive:
Still have problem, nothing seems to work!
Anybody else that might be able to help?
BTW. Anyone tested if multiloader works on soft bricked phones:
http://forum.xda-developers.com/showthread.php?t=2618253
hi there,
i was on HYD52ROM V2 for the Ascend P6.
I decided to do an upgrade to the KitKat Version of HYD52ROM. So i installed the TouchRecoveryInstaller-v1_01.apk and rebooted. I had the newest file of the Rom on my SD-Card. I wiped the phone and the dalvik also.
Then it said, that there is an error while installing the KitKat Rom.
I thought "no problem" - i had the old V2 on my sd card also.
Now only the bootscreen "Huawei Ascend" appears and nothing more. I can switch off the phone while hitting all the buttons but nothing more. Is there any possibility to get it back working?
If so, please a short step by step will do it.
Thanks!
piepsys said:
hi there,
i was on HYD52ROM V2 for the Ascend P6.
I decided to do an upgrade to the KitKat Version of HYD52ROM. So i installed the TouchRecoveryInstaller-v1_01.apk and rebooted. I had the newest file of the Rom on my SD-Card. I wiped the phone and the dalvik also.
Then it said, that there is an error while installing the KitKat Rom.
I thought "no problem" - i had the old V2 on my sd card also.
Now only the bootscreen "Huawei Ascend" appears and nothing more. I can switch off the phone while hitting all the buttons but nothing more. Is there any possibility to get it back working?
If so, please a short step by step will do it.
Thanks!
Click to expand...
Click to collapse
Only soft bricked, install stock recovery.
http://forum.xda-developers.com/showpost.php?p=51066019&postcount=14
ok thank you for your answer...
means i have to put the "UPDATE.APP" in the DLOAD-folder on the sd?
two more questions...
1) is it important which original firmware version?
2) i have downloaded the "Huawei Update Extractor" ... what to do with it? Do you have a link for the stock recovery? I haven´t read s.th. about it :-/
Regards
piepsys said:
ok thank you for your answer...
means i have to put the "UPDATE.APP" in the DLOAD-folder on the sd?
Click to expand...
Click to collapse
Just updated my last post same time when you wrote.. check the link
ok thank you. i will check the link
The problem i have ... how to -> Put your device in fastboot mode ( > adb reboot bootloader )
Never done this BIG SORRY
piepsys said:
ok thank you. i will check the link
The problem i have ... how to -> Put your device in fastboot mode ( > adb reboot bootloader )
Never done this BIG SORRY
Click to expand...
Click to collapse
Download http://forum.xda-developers.com/showthread.php?t=2588979
Press y and then n
Then download http://www.androidfilehost.com/?fid=23252070760973625
and extract it to c:\adb then press sift and right click and go to open commandwindow here
then write: adb reboot bootloader
then: fastboot flash recovery recovery.img
and last: fastboot reboot
Then download firmware (latest international is: https://mega.co.nz/#!N8BAxZYJ!8cOp8imgnLxNMfUjCDoBtzR69tz7nLYccL2-VMG4If8 ).
Extract that and make dload folder to your external sd card. and put update.app in to it.. then press power+volumeup+volume down when phone restarts, and it starts to install stock firmware
worked! thanx a lot for your help!!!
I have some doubts about the using of flash tool.
1. Is it necessary to unlock the boatloader before flashing my phone?
2. Is it necessary to tick the usb debugging before using flash tool?
3. When i use flash tool, after some time it shows failed in my xperia m dual c2005. I am curious to know the reason behind it..
Any body please help me to clear my doubts....
N RAM said:
I have some doubts about the using of flash tool.
1. Is it necessary to unlock the boatloader before flashing my phone?
2. Is it necessary to tick the usb debugging before using flash tool?
3. When i use flash tool, after some time it shows failed in my xperia m dual c2005. I am curious to know the reason behind it..
Any body please help me to clear my doubts....
Click to expand...
Click to collapse
Yes the bootloader obviously should be unlocked before you do the flashing stuff!Flashtool works for me and the state of usb debugging never affected its functionality ! Make sure you have all the drivers properly installed!
ojas12345 said:
Yes the bootloader obviously should be unlocked before you do the flashing stuff!Flashtool works for me and the state of usb debugging never affected its functionality ! Make sure you have all the drivers properly installed!
Click to expand...
Click to collapse
Thanks bro..:good:
Dude one more simple doubt. Is it possible for you to tell me how to install the drivers in my win 7?
Now I am facing another problem. I just tried to restore my xperia m dual c2005. But it didn't go well. I saw my xperia waves got stucked. So i just removed my battery an replaced it. When I switched on my phone it only shows SONY logo. I tried to repair my software by using PCC and Xperia Companion. It shows error messages. Then i showed it to a mobile service agent in a local mobile shop. He told me that m dual c2005 model had a sony only memory. So they cannot do it because the memory can't be re-writeted in this model. Is that true? Or is there any other better option to resolve my phone's issue?
Please help me bro....:crying:
N RAM said:
Thanks bro..:good:
Dude one more simple doubt. Is it possible for you to tell me how to install the drivers in my win 7?
Now I am facing another problem. I just tried to restore my xperia m dual c2005. But it didn't go well. I saw my xperia waves got stucked. So i just removed my battery an replaced it. When I switched on my phone it only shows SONY logo. I tried to repair my software by using PCC and Xperia Companion. It shows error messages. Then i showed it to a mobile service agent in a local mobile shop. He told me that m dual c2005 model had a sony only memory. So they cannot do it because the memory can't be re-writeted in this model. Is that true? Or is there any other better option to resolve my phone's issue?
Please help me bro....:crying:
Click to expand...
Click to collapse
To Install the drivers
I think you might be able to solve this problem! The problem is with your partitions.So follow:
first of all install fastboot and adb drivers from: http://forum.xda-developers.com/showthread.php?p=48915118
go to device manager and verify that and android device interface or something like that appears.
If it doesnt then s1 boot device will appear as unknown device , right click on that and update device driver and then select the option let me pick from drivers on my computer .
After that select android device then dont select anything , itll get autoselected and click next!
now your device should appear in device manager!
To restore the system completely
Install a recovery for the device by the following procedure :
first download twrp from https://twrp.me/devices/sonyxperiam.html, rename it to recovery.img
go to cmd with admin rights in the folder in which recovery is put
(flash the recovery in boot sector)
type :
fastboot flash boot recovery.img
now boot the phone up the recovery should automatically open up, it may get stuck for some time but only once it will so be patient,;
go to wipe, then advanced wipe! select every option and micro sd,internal storage and usb-otg are optional
then swipe to wipe , it will show that it failed but dont worry some partitions are of sort that they show error now after this the problem should be resolved , after this flash a rom of your choice or restore a dual stock firmware backup (note: you cannot restore backups which were made from cwm , for that flash philz or cwm recovery)
Please report and hit thanks if i helped you!
ojas12345 said:
To Install the drivers
I think you might be able to solve this problem! The problem is with your partitions.So follow:
first of all install fastboot and adb drivers from: http://forum.xda-developers.com/showthread.php?p=48915118
go to device manager and verify that and android device interface or something like that appears.
If it doesnt then s1 boot device will appear as unknown device , right click on that and update device driver and then select the option let me pick from drivers on my computer .
After that select android device then dont select anything , itll get autoselected and click next!
now your device should appear in device manager!
To restore the system completely
Install a recovery for the device by the following procedure :
first download twrp from https://twrp.me/devices/sonyxperiam.html, rename it to recovery.img
go to cmd with admin rights in the folder in which recovery is put
(flash the recovery in boot sector)
type :
fastboot flash boot recovery.img
now boot the phone up the recovery should automatically open up, it may get stuck for some time but only once it will so be patient,;
go to wipe, then advanced wipe! select every option and micro sd,internal storage and usb-otg are optional
then swipe to wipe , it will show that it failed but dont worry some partitions are of sort that they show error now after this the problem should be resolved , after this flash a rom of your choice or restore a dual stock firmware backup (note: you cannot restore backups which were made from cwm , for that flash philz or cwm recovery)
Please report and hit thanks if i helped you!
Click to expand...
Click to collapse
Thanks dude... Are you sure about this idea?
My phone is not an Indian phone. It is from Dubai. Will this country change damage my phone's main board when I boot it?
And some more doubts are remaining... May I please clear it with you....
Which will be the best flashtool?
Emma tool provided by Sony or flashtool-0.9.18.1 or flashtool-0.9.21.0
When do I need to connect my handset to the computer? Is it before when I go to cmd to type fastboot flash boot recovery.img ?
Whether I need to install flash tool before installing device drivers?
Please help me to clear all my doubts....
N RAM said:
Thanks bro..:good:
Dude one more simple doubt. Is it possible for you to tell me how to install the drivers in my win 7?
Now I am facing another problem. I just tried to restore my xperia m dual c2005. But it didn't go well. I saw my xperia waves got stucked. So i just removed my battery an replaced it. When I switched on my phone it only shows SONY logo. I tried to repair my software by using PCC and Xperia Companion. It shows error messages. Then i showed it to a mobile service agent in a local mobile shop. He told me that m dual c2005 model had a sony only memory. So they cannot do it because the memory can't be re-writeted in this model. Is that true? Or is there any other better option to resolve my phone's issue?
Please help me bro....:crying:
Click to expand...
Click to collapse
N RAM said:
Thanks dude... Are you sure about this idea?
My phone is not an Indian phone. It is from Dubai. Will this country change damage my phone's main board when I boot it?
And some more doubts are remaining... May I please clear it with you....
Which will be the best flashtool?
Emma tool provided by Sony or flashtool-0.9.18.1 or flashtool-0.9.21.0
When do I need to connect my handset to the computer? Is it before when I go to cmd to type fastboot flash boot recovery.img ?
Whether I need to install flash tool before installing device drivers?
Please help me to clear all my doubts....
Click to expand...
Click to collapse
The country doesnt matter you may flash any country's generic rom,mine was indian but I flashed brazillian..
And about the flashtool I dont think emma is good , i prefer flashtool any version...if you find the latest not working then you may try the second latest but 99% it does work good..
Most important : You need to connect your device in fastboot before installing drivers and flash the boot partition by those command so go here on how to boot in fastboot mode http://www.theandroidsoul.com/boot-sony-xperia-m-fastboot-mode-51835/
try and report ...
All the best:good:
ojas12345 said:
The country doesnt matter you may flash any country's generic rom,mine was indian but I flashed brazillian..
And about the flashtool I dont think emma is good , i prefer flashtool any version...if you find the latest not working then you may try the second latest but 99% it does work good..
try and report ...
All the best:good:
Click to expand...
Click to collapse
You are really awesome!!
For this do I need to unlock the bootloader?
Yeah. I will report about our experiment after trying it...:good:
Is it possible for me to relock bootloader? If yes, please explain me about that method...
N RAM said:
You are really awesome!!
For this do I need to unlock the bootloader?
Yeah. I will report about our experiment after trying it...:good:
Is it possible for me to relock bootloader? If yes, please explain me about that method...
Click to expand...
Click to collapse
yes you will have to unlock bootloader and for that too i suggest you use flashtool because it does the work in seconds,!
and for relocking i dont there's any method to relock bootloader , u dont need to do that after all!
It enables you to flash modes and other cool stuff! even if you dont wanna do that then dont touch it !flash a cyanogenmod recovery,which is quite basic and wont modify anything that may harm your phone...
All the best
What will be the difference between the firmwares C2005_15.5.A.1.5_CE.ftf and C2005_15.5.A.1.5_DE.rar?
Which will be the best for me to download?
ojas12345 said:
To Install the drivers
I think you might be able to solve this problem! The problem is with your partitions.So follow:
first of all install fastboot and adb drivers from: http://forum.xda-developers.com/showthread.php?p=48915118
go to device manager and verify that and android device interface or something like that appears.
If it doesnt then s1 boot device will appear as unknown device , right click on that and update device driver and then select the option let me pick from drivers on my computer .
After that select android device then dont select anything , itll get autoselected and click next!
now your device should appear in device manager!
To restore the system completely
Install a recovery for the device by the following procedure :
first download twrp from https://twrp.me/devices/sonyxperiam.html, rename it to recovery.img
go to cmd with admin rights in the folder in which recovery is put
(flash the recovery in boot sector)
type :
fastboot flash boot recovery.img
now boot the phone up the recovery should automatically open up, it may get stuck for some time but only once it will so be patient,;
go to wipe, then advanced wipe! select every option and micro sd,internal storage and usb-otg are optional
then swipe to wipe , it will show that it failed but dont worry some partitions are of sort that they show error now after this the problem should be resolved , after this flash a rom of your choice or restore a dual stock firmware backup (note: you cannot restore backups which were made from cwm , for that flash philz or cwm recovery)
Please report and hit thanks if i helped you!
Click to expand...
Click to collapse
Which is the best site for downloading latest firmware?
N RAM said:
Which is the best site for downloading latest firmware?
Click to expand...
Click to collapse
intead of flashing firmware ,it is better to flash a backup because , no chances of error
download the backup for your device from here and restore it via cwm based recovery like philz or cwm itselg
http://forum.xda-developers.com/showthread.php?t=2703161
ojas12345 said:
yes you will have to unlock bootloader and for that too i suggest you use flashtool because it does the work in seconds,!
and for relocking i dont there's any method to relock bootloader , u dont need to do that after all!
It enables you to flash modes and other cool stuff! even if you dont wanna do that then dont touch it !flash a cyanogenmod recovery,which is quite basic and wont modify anything that may harm your phone...
All the best
Click to expand...
Click to collapse
I tried to flash my xperia m dual c2005. Its only showing like the picture for long time.
what will be this? please reply me fast...
N RAM said:
I tried to flash my xperia m dual c2005. Its only showing like the picture for long time.
what will be this? please reply me fast...
Click to expand...
Click to collapse
wait for some time i think it'll take time to do that or else flash a backup after flashing a cwm based recovery!
ojas12345 said:
wait for some time i think it'll take time to do that or else flash a backup after flashing a cwm based recovery!
Click to expand...
Click to collapse
what is the meaning of that red writings?
N RAM said:
what is the meaning of that red writings?
Click to expand...
Click to collapse
I never faced that kind of a thing , make sure that you are flashing the right file!
You have unlocked your bootloader?
Again I say better flash a recovery then a backup ,its much easier.
ojas12345 said:
I never faced that kind of a thing , make sure that you are flashing the right file!
You have unlocked your bootloader?
Again I say better flash a recovery then a backup ,its much easier.
Click to expand...
Click to collapse
My phone is only showing SONY logo. So is it possible for this recovery? If yes, please tell me the correct tutorial for that and if possible any video tutorial so that i can understand it correctly...
not working
ojas12345 said:
To Install the drivers
I think you might be able to solve this problem! The problem is with your partitions.So follow:
first of all install fastboot and adb drivers from: http://forum.xda-developers.com/showthread.php?p=48915118
go to device manager and verify that and android device interface or something like that appears.
If it doesnt then s1 boot device will appear as unknown device , right click on that and update device driver and then select the option let me pick from drivers on my computer .
After that select android device then dont select anything , itll get autoselected and click next!
now your device should appear in device manager!
To restore the system completely
Install a recovery for the device by the following procedure :
first download twrp from https://twrp.me/devices/sonyxperiam.html, rename it to recovery.img
go to cmd with admin rights in the folder in which recovery is put
(flash the recovery in boot sector)
type :
fastboot flash boot recovery.img
now boot the phone up the recovery should automatically open up, it may get stuck for some time but only once it will so be patient,;
go to wipe, then advanced wipe! select every option and micro sd,internal storage and usb-otg are optional
then swipe to wipe , it will show that it failed but dont worry some partitions are of sort that they show error now after this the problem should be resolved , after this flash a rom of your choice or restore a dual stock firmware backup (note: you cannot restore backups which were made from cwm , for that flash philz or cwm recovery)
Please report and hit thanks if i helped you!
Click to expand...
Click to collapse
i am getting this error :
C:\Fastboot\android-sdk-windows\tools>fastboot flash boot recovery.img
sending 'boot' (11208 KB)...
FAILED (status read failed (Too many links))
finished. total time: -0.000s
Hey,
I am running the exodus rom on my oneplus 3 and after todays update I got a huge problem. My screen fails to wake up, the phone works normal I think but the screen is just black..
How do I solve a problem like this?
I have tried turning it on and off again, it did not work
Fast And Pro said:
Hey,
I am running the exodus rom on my oneplus 3 and after todays update I got a huge problem. My screen fails to wake up, the phone works normal I think but the screen is just black..
How do I solve a problem like this?
I have tried turning it on and off again, it did not work
Click to expand...
Click to collapse
dirty flash?
may be clean flash will help
JumboMan said:
dirty flash?
may be clean flash will help
Click to expand...
Click to collapse
Idk what happend
but the screen works again but my phone is now bricked and the usual guides to unbrick do not work.
This is the status of my 1+3
Bootloader: unlocked and I can boot in the bootloader
my device is recognized by my pc
I cannot enter TWRP and I cant flash TWRP.
When I try to flash it CMD says that its flashed but I still cant boot in twrp, I get a random screen with md5 checksum and some fails.
Can someone help me?
Fast And Pro said:
Idk what happend
but the screen works again but my phone is now bricked and the usual guides to unbrick do not work.
This is the status of my 1+3
Bootloader: unlocked and I can boot in the bootloader
my device is recognized by my pc
I cannot enter TWRP and I cant flash TWRP.
When I try to flash it CMD says that its flashed but I still cant boot in twrp, I get a random screen with md5 checksum and some fails.
Can someone help me?
Click to expand...
Click to collapse
I don't have answer for question.
it looks like you have some serious problem with your phone.
may be some experienced user will help you.
I think you should approach Naman bhalla as he made guide to unbrick so he may know in detail
JumboMan said:
I don't have answer for question.
it looks like you have some serious problem with your phone.
may be some experienced user will help you.
I think you should approach Naman bhalla as he made guide to unbrick so he may know in detail
Click to expand...
Click to collapse
I found a fix on the forum and this explained what my problem was
On the screen when the phone failed to md5 checksum, you've got several partition failed right? in red text.
- download this : https://www.androidfilehost.com/?fid=24591000424942573
and then extract.
- download platform tools attached below. extract in the same folder with first file you've downloaded.
- Boot your phone to fastboot mode, plug your usb, make sure adb and fastboot driver are installed.
- on the folder, hold shift and right click, click open command here
- type fastboot devices
- make sure your serial number appear.
- now flash the img of the missing file according to the partition in red text on your ms5 checksum failed one by one.
- e.g. "fastboot flash boot_aging boot_aging.img.
- make sure you flash all the missing partition.
- type fastboot reboot.
this will boot you to oos 3.1.2.
unfortunately I couldn't extract the newest oos dat. data. but you could always take the OTA
goodluck mate. sorry for my english
Fast And Pro said:
I found a fix on the forum and this explained what my problem was
On the screen when the phone failed to md5 checksum, you've got several partition failed right? in red text.
- download this : https://www.androidfilehost.com/?fid=24591000424942573
and then extract.
- download platform tools attached below. extract in the same folder with first file you've downloaded.
- Boot your phone to fastboot mode, plug your usb, make sure adb and fastboot driver are installed.
- on the folder, hold shift and right click, click open command here
- type fastboot devices
- make sure your serial number appear.
- now flash the img of the missing file according to the partition in red text on your ms5 checksum failed one by one.
- e.g. "fastboot flash boot_aging boot_aging.img.
- make sure you flash all the missing partition.
- type fastboot reboot.
this will boot you to oos 3.1.2.
unfortunately I couldn't extract the newest oos dat. data. but you could always take the OTA
goodluck mate. sorry for my english
Click to expand...
Click to collapse
Its good.
Self help is best help
Hallo Guys ,
My situation is , I flashed Xiaomi.eu MIUI 13 Rom on my Poco F3.
Now I'm willing to give it as a gift and would like to flash back the stock Rom with Android 11.
I downloaded fastboot stock Rom for Europe and the flashtool is installed on my pc as well .
I put the Phone on fastboot mode and connect the phone to the Pc and start flashtool , press refresh to recognise the device , no issues there , but once I click flash to start the process I get the error message " can not found flash _all_ lock.bat .
I need help please what do I do wrong ?
I went for the installable flash tool because the zipped version delivers errors as well when I press refresh for recognise the device .
Thanks for help
Check again inside folder. It should be double folder which is flash tool can not detect flash bat.
anang1979 said:
Check again inside folder. It should be double folder which is flash tool can not detect flash bat.
Click to expand...
Click to collapse
Which folder? From the zipped flashtool or ?
From fasboot rom. If you unzip there is another folder inside with same name. That folder you should put into flash tool.
anang1979 said:
From fasboot rom. If you unzip there is another folder inside with same name. That folder you should put into flash tool.
Click to expand...
Click to collapse
Thanks I just had to unzip the Rom again as it was tgz compressed , and it worked like a Charme.. thread solved . Thanks mate