Develop Bugs

Stuck Splash Screen help me-please

my UNI after uproom can not start.it only can perform 02 picture.so my UNI now can not be use.i tried to up many different room but it can not active.i hope everybody can held me solve this problem.thanks so much.hope to receive your reply

bestboytq said:
my UNI after uproom can not start.it only can perform 02 picture.so my UNI now can not be use.i tried to up many different room but it can not active.i hope everybody can held me solve this problem.thanks so much.hope to receive your reply
Click to expand...
Click to collapse
Ở HN có dịch vụ thay Disk.On.Chip đó bestboytq, trên này cũng bó tay thôi, chia buồn ***g bạn, con chip đó khoảng 12$. Xem lại trong topic ở MF đi, có người cho địa chỉ đó, nếu ở HCM thì dễ rồi.

Hê hê ! nó là người nước ngoài chứ đâu phải là người việt mà bạn trả lời tiếng việt ! chắc nó đang đi kiếm người phiên dịch đó !

Search and you shall find:
FOR ALL THOSE WHO STUCK IN THE BOOT SCREEN OF UNIVERSAL
(full) http://forum.xda-developers.com/showthread.php?t=259003
(mobile) http://forum.xda-developers.com/archive/index.php/t-259003.html
The MTTY tool enables you to determine whether your internal flashdisk is defective. Once that is confirmed you are out of luck, the device will have to be repaired by the manufacturer.

Have u tried to upgrade through bootloader mode

bac shinechi that la dinh cao.minh tham gia ben MF nhung dao nay MF ko vao dc nen mo len day nho cac chuyen gia giup do,nhung co le cung bo tay roi.minh o HN,bac biet co cho nao thay D-o-C uy tin va chat luong thi chi cho a e voi.thanks

i am sorry everybody,i do not know what is "mtty" i can not find it.if someone know please tell me and held me how to use it.thanks

bestboytq said:
i am sorry everybody,i do not know what is "mtty" i can not find it.if someone know please tell me and held me how to use it.thanks
Click to expand...
Click to collapse
I have attached the program for you.
instructions:
-disconnect USB cable
-disable USB connection in desktop ActiveSync
-connect USB cable
-start mtty
-create new connection and select USB from ports
press enter to see USB prompt in mtty:
USB>
type (dont copy&paste):
task 28
and press enter
If the result is the following then you are out of luck:
flFormatPhysicalDrive:status=23
DOC_format failed!

BTW just for my knowledge i would also like to know wat this mtty is ?

niketkumar said:
BTW just for my knowledge i would also like to know wat this mtty is ?
Click to expand...
Click to collapse
Google, and thou shalt find ..
MTTY is some kind of terminal emulation software, and in this case it is used to communicate to serial and/or USB enabled devices. On the HTC devices (including the Universal) it enables you to issue a selection of commands that allow you to read the status of som eof the components, to clear the bootloader flags, to format the internal flashdisk etc etc
(This program should of course be used with precautions)
In this particular case, the task 28 command issues a format command to the internal DOC=DiskOnChip that hosts the operating system after initialization. When performing a hard reset, so either selecting clear storage/1234 or reset+softkeys/clear storage, the internal flash disk is reinitialized, reformatted, and the OS is put back on the internal flash disk, thus preparing the device for its first use.
The behaviour above indicates a defective internal flash disk, and the task 28 command verifies that. If the result is "format failed" then there is no other solution then to send the device back to qtek/o2/htc etc...

have u ever tried to do with your method.your solution is very good,but can you show me more carefully.thanks so much

Wiz said:
Google, and thou shalt find ..
MTTY is some kind of terminal emulation software, and in this case it is used to communicate to serial and/or USB enabled devices. On the HTC devices (including the Universal) it enables you to issue a selection of commands that allow you to read the status of som eof the components, to clear the bootloader flags, to format the internal flashdisk etc etc
(This program should of course be used with precautions)
In this particular case, the task 28 command issues a format command to the internal DOC=DiskOnChip that hosts the operating system after initialization. When performing a hard reset, so either selecting clear storage/1234 or reset+softkeys/clear storage, the internal flash disk is reinitialized, reformatted, and the OS is put back on the internal flash disk, thus preparing the device for its first use.
The behaviour above indicates a defective internal flash disk, and the task 28 command verifies that. If the result is "format failed" then there is no other solution then to send the device back to qtek/o2/htc etc...
Click to expand...
Click to collapse
Thanx for the info.

stuck
dude i also had the same problem. my phone was working perfectly fine. i dont kno what tickeled my ass nd i tried upgrading the radio with the original club-imate rom upgrade file. upgrade was successful but when i tried the hard reset thing i got stuck at the blue color booting screen nd now ma phone is not completing the boot. i have a jasjar. as mentioned in this forum i downloaded the mtty utility nd tried running task 28. unfortunately the result is "format failed". as per niketkumar my phone is ****ed now. niket do i have some other remedy bro rather than going to the workshop. my exams are goingon nd the workshop here is in new delhi which is aroound 600 miles from jodhpur where m studying presently. is there any other way out. do u have ne idea as to what would this fixing up cost me coz my phone is outa warranty period nd its a second hand one. with my figers crossed m waiting 4 a reply.................................

hitesh8263 said:
dude i also had the same problem. my phone was working perfectly fine. i dont kno what tickeled my ass nd i tried upgrading the radio with the original club-imate rom upgrade file. upgrade was successful but when i tried the hard reset thing i got stuck at the blue color booting screen nd now ma phone is not completing the boot. i have a jasjar. as mentioned in this forum i downloaded the mtty utility nd tried running task 28. unfortunately the result is "format failed". as per niketkumar my phone is ****ed now. niket do i have some other remedy bro rather than going to the workshop. my exams are goingon nd the workshop here is in new delhi which is aroound 600 miles from jodhpur where m studying presently. is there any other way out. do u have ne idea as to what would this fixing up cost me coz my phone is outa warranty period nd its a second hand one. with my figers crossed m waiting 4 a reply.................................
Click to expand...
Click to collapse
Dont worry at all try to reflash it back with the complete ROM upgrade and if it is not detected by ur comp. then try it in the Bootloader mode .

niket
niket, i have tried it several times brother. i have upgraded/reflashed the rom version available at the clubimate site several times but the results are same. no success. i have done it in the bootloader mode only. my bootloader update has been successful. it shows that v1.01 has bee uploaded to my device. when i reflash the rom it every time stucks at the blue color boot screen and then there is no change. as suggested in the forum i had downloaded the mtty utility software and ran task 28. it shows document format error or some crap like that. according to the forum participants my device has a corrupted flash card and i need to get it fixed. in india we have the service center at delhi nd when i told them about ma problem they have also suggeted me to get it changed sice it is corrupted nd of no use now. they say that no matter how many times i run the upgrade now it wont help me. they gave the following reason:
since the flash card is corrupted, though the upgrade will be successful as the whole flash card is overwitten but when i will boot my device the boot files wont be read by my device bcoz of corrupt flash card and hence the device wont boot my os. they say its a hardware problem nd the sofwares have nothing to do with it.
if you have a remedy for me then plz do reply. is it possible to fix the card by formatting it and if yes then how to run the format on internal flash drive.
m badly stuck man. if nuthin works i will get it replaced this sunday i.e. 12/11/06.

hitesh8263 said:
though the upgrade will be successful as the whole flash card is overwitten but when i will boot my device the boot files wont be read by my device bcoz of corrupt flash card and hence the device wont boot my os. they say its a hardware problem nd the sofwares have nothing to do with it.
if you have a remedy for me then plz do reply. is it possible to fix the card by formatting it and if yes then how to run the format on internal flash drive.
m badly stuck man. if nuthin works i will get it replaced this sunday i.e. 12/11/06.
Click to expand...
Click to collapse
Sorry, the internal DiskOnChip is divided in three parts, the part where the rom goes, the part where extended_rom goes and the part where your operating system will end up for first use. It is that last part that has become corrupted. You can flash perfectly to area 1 and 2, but it is area 3 that you will ultimately need. That 3rd area is what is initialized when you select clear storage or press the two soft keys+reset.
Since the error code is format failed, there is no solution but to send it back to the manufacturer of supplier ...

hitesh8263 said:
if nuthin works i will get it replaced this sunday i.e. 12/11/06.
Click to expand...
Click to collapse
So wats the news ? Got it fixed , How much did it cost to u ?

Wiz said:
I have attached the program for you.
instructions:
-disconnect USB cable
-disable USB connection in desktop ActiveSync
-connect USB cable
-start mtty
-create new connection and select USB from ports
press enter to see USB prompt in mtty:
USB>
type (dont copy&paste):
task 28
and press enter
If the result is the following then you are out of luck:
flFormatPhysicalDrive:status=23
DOC_format failed!
Click to expand...
Click to collapse
i had the result below
:
flFormatPhysicalDrive:status=23
DOC_format failed!
what should i do ???

Wiz said:
Sorry, the internal DiskOnChip is divided in three parts, the part where the rom goes, the part where extended_rom goes and the part where your operating system will end up for first use. It is that last part that has become corrupted. You can flash perfectly to area 1 and 2, but it is area 3 that you will ultimately need. That 3rd area is what is initialized when you select clear storage or press the two soft keys+reset.
Since the error code is format failed, there is no solution but to send it back to the manufacturer of supplier ...
Click to expand...
Click to collapse
When I issue the task 28 command the format is successful but I am still stuck at the splashscreen.

Wiz said:
I have attached the program for you.
instructions:
-disconnect USB cable
-disable USB connection in desktop ActiveSync
-connect USB cable
-start mtty
-create new connection and select USB from ports
press enter to see USB prompt in mtty:
USB>
type (dont copy&paste):
task 28
and press enter
If the result is the following then you are out of luck:
flFormatPhysicalDrive:status=23
DOC_format failed!
Click to expand...
Click to collapse
hey sorry to bump an old topic.
Im trying to troubleshoot / fix my Harrier (and my PDA2k is playing up as well ffs) and I'm having problems following these instructions.
I open up mtty, but there doesnt seem to be any option to select USB as a connection. There is only COM1 and COM2 ports.
Where do i go from here?
im using v1.42 on WinXP pro.

Exclusive Solution For LG D686 Fully Dead After Flash

After Flash By Any Tool Like LgTool (Setool Product)
Device Fully Dead
I Try All Solutions But No Luck
Finally I Got This Solution With Test Point To Make Device Detected As MTK Preloader
And Flash It By Flash Tool Or Any Tool Can Flash Scatter Firmware
Firmware + Test Point
Test Point Only
Make Test 1st Without Battery, When flash tool detect device connect Battery again
Any Qus. !! I'm Here

I don't understand the test point ! just need to short the resistor to GND ? I did it and flash tool recognized it but flash failed , I tried several flash tools and still fails , can u explain more please ?

mani_cute said:
I don't understand the test point ! just need to short the resistor to GND ? I did it and flash tool recognized it but flash failed , I tried several flash tools and still fails , can u explain more please ?
Click to expand...
Click to collapse
Where did you find that test point? Can you upload a detailed pic please..

shubhambhise said:
Where did you find that test point? Can you upload a detailed pic please..
Click to expand...
Click to collapse
i'll explain what u can do whit this device
1- disamble device to get main board and charging flex
2- short test point pic i upload
3- open any tool ca flash scatter file and chose firmware
4- then chose format all and download and start
5- when u short test point plug usb cable
6- pc will detect ur device as MTK Preloader (VCOM)
7- scatter flasher will now flashing it
Hint:
8- i recommended let device flash all firmware not preloader only
9- to do that just plug battery when u remove short point immediately
any QUS. ??
I'm Here

A_1st said:
i'll explain what u can do whit this device
1- disamble device to get main board and charging flex
2- short test point pic i upload
3- open any tool ca flash scatter file and chose firmware
4- then chose format all and download and start
5- when u short test point plug usb cable
6- pc will detect ur device as MTK Preloader (VCOM)
7- scatter flasher will now flashing it
Hint:
8- i recommended let device flash all firmware not preloader only
9- to do that just plug battery when u remove short point immediately
any QUS. ??
I'm Here
Click to expand...
Click to collapse
Except test point I know everything.. But I didn't find that after disassembling ... Exactly where the test point should be?

shubhambhise said:
Except test point I know everything.. But I didn't find that after disassembling ... Exactly where the test point should be?
Click to expand...
Click to collapse
i already mark test point in photo

do we need any box-tool for flashing? only a pc is enough?

where is the gnd cant find it

My LGD686 is stuck at dead android robot with red ! mark whenever i reboot,i tried flashing 3 different files but no luck.please help.

Lg d686 dead
My mobile success flashing with this file using sp flashtool.but still cannot boot,and detected mtk device when i connecting to the computer
Any solutions

hard bricked dead
i charged and charged my dead LG G pro lite dual d686.. i checked the battery with a meter and found it to be well over 80% charged. however still my phone wont n connect to the pc. it just connects and disconnects with the usb sound ' connected then dissconnected.
phone is dead after trying to flash it due to error boot. How can I just flash this dead phone. I see no one replying here or atleast sharing another link. I cannot find anything in the forum regarding dead LG d686 ..and how to recover it

@all
in my case device dead cuz OTA update not emmc damage
after this thread i receive alot of D686 Dead NOT ALL WORK
80% of devices have emmc issue not software issue
my solution work ok if ur device bricked by software or dead boot ONLY
no other conditions
and i want say something about all devices in general (The life span of any device eMMC Is 2 Years)(It's Called Sudden Death Remember N7100/I9300)
i change alot of emmc in samsung LG nexus htc and customers told me - i bought device since 2 years -
Thats All N don't Be Angry About This

Conecten el usb y si no lo reconose agan un corto osea pegen algo largo que aga entrar en contacto todos los pin de la pila y luego automaticamente la pc lo reconosera asi lo ise con un lg g peo lite que me aparecia como dispocitibo mtk600 pero le ise ese proceso y lo reconocio como dispocitivo lg y procedio a pasar el flas ojovtienes que estar aciendolo consecutiva mente asta que empiese a cargar el software ya una ves cargando el software te daras cuenta que se quedara ya en lg y no se desconectara

Very nice job indeed?, thank you very much for sharing bro.

thanks
my device is back to life

LG g pro KDZ
Hi, when i flashed my Lg g pro lite with normal flash passes without problems
the problem is in CSE flash with lg flash tool 2014 i get this error "LGUserCSTool LGMobile has stopped working"
i try LGUP but i get error "unknown model"
the phone is working normal i need full flash to wippe all data and unroot it not hared roset
Thank you for help

I have D682 with the same problem. After trying to flash it with LGEtool when it had boot certify problem, LGEtool failed to flash and made it dead and now is detected only as MTK device, but I don't know if I can use this same firmware for my model, or where can I find the firmware for my phone D682?
Operation : Identify [ v2.13 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM20)
MODE : BOOTROM
PORT : 20
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6575 , SBID : 0x8B00 , HWVR : 0xCB00 , SWVR : 0xE201
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6575
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : OK
NAND : 000000000000000000000000
eMMC : OK
eMMC : 00000000000000000000000000000000
DAInf: 0 : 0 : 0
DA : EXT_RAM NOT initialized!
eMMC : OK
eMMC : 00000000000000000000000000000000
NAND : OK
NAND : 000000000000000000000000
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : BOOT 2ND DA FAILED!
ERROR : 000007D4 : BROM : DOWNLOAD DA FAIL
Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!
Reconnect Power/Cable!
A_1st said:
After Flash By Any Tool Like LgTool (Setool Product)
Device Fully Dead
I Try All Solutions But No Luck
Finally I Got This Solution With Test Point To Make Device Detected As MTK Preloader
And Flash It By Flash Tool Or Any Tool Can Flash Scatter Firmware
Firmware + Test Point
Test Point Only
Make Test 1st Without Battery, When flash tool detect device connect Battery again
Any Qus. !! I'm Here
Click to expand...
Click to collapse

help "your device has loaded a different operating system"

after trying to install PCT-L29 10.0.0.172 (C432E10R3P4) [Dload Method] I can't get out of this situation, "your device has loaded a different operating system"
did anyone happen? what can I do? or nothing? thanks

Flash the 171 and not 172, see this topic: https://forum.xda-developers.com/honor-view-20/development/stockroms-t3955026
Best Regards,
Toetje

Sadly you didn't read the warnings that you cannot upgrade to 10 with dload method and you have bricked your device. And there is 99% chance that you wont get it back. At least for now.
You'll need to wait for global android 10 release for view 20 and hope that somehow or someone will figure out working solution to upgrade with dload method. If not, sadly your phone is gone. (some user already took the device to huawei service centre and only sollution was changing the motherboard, it is not covered by warranty, so it is expensive.)

SOLVED
cheers SOLVED for those who were in my situation you should know that I installed the PCT-L29 10.0.0.171 (C432E10R3P4) version following the dload Force Upgrade method but you have to turn on the device only with the volume up and power on keys and it is reset screen from OTG Stick or Adapter C to A with USB Stick. :victory:

looneylv said:
Sadly you didn't read the warnings that you cannot upgrade to 10 with dload method and you have bricked your device. And there is 99% chance that you wont get it back. At least for now.
You'll need to wait for global android 10 release for view 20 and hope that somehow or someone will figure out working solution to upgrade with dload method. If not, sadly your phone is gone. (some user already took the device to huawei service centre and only sollution was changing the motherboard, it is not covered by warranty, so it is expensive.)
Click to expand...
Click to collapse
This is not true, the dload method works just fine for 171, however we cannot upgrade using hstool/hisuite.
Best Regards,

Facing same problem
ofleda7 said:
cheers SOLVED for those who were in my situation you should know that I installed the PCT-L29 10.0.0.171 (C432E10R3P4) version following the dload Force Upgrade method but you have to turn on the device only with the volume up and power on keys and it is reset screen from OTG Stick or Adapter C to A with USB Stick. :victory:
Click to expand...
Click to collapse
Hi mate,
I'm facing the same problem right now, after my try to update it manually to Android 10.
After turning on its showing me thread: help "your device has loaded a different operating system"
And don't know how to fix it. When I try to flash it in the update mode with a dload file on a sd card, it stops installing after 5%
I really dont know what to do

Same problem here
Binban88 said:
Hi mate,
I'm facing the same problem right now, after my try to update it manually to Android 10.
After turning on its showing me thread: help "your device has loaded a different operating system"
And don't know how to fix it. When I try to flash it in the update mode with a dload file on a sd card, it stops installing after 5%
I really dont know what to do
Click to expand...
Click to collapse
The same goes here, I successfully updated my Honor V20 phone to "Huawei Honor View 20 PCT-L29 hw eea HLRCF Princeton-L29D 10.0.0.195" and now my phone is a vegetable and saying "your device has loaded a different operating system". Any solution? I think I just burnt 400 dollars.
My old version was PCT-L29 9.0.1.169(C636E1R2P1).

Se me bloqueo un p30 pro VOG-L04 y solo sube modo eRecovery, favor ayudarme con la solucion

Hello,
First of all, I'm sorry if I'm not in the right forum, but on the Mate 20 Lite forums, I'm not getting any responds...
I have a Huawei Mate 20 Lite, SNE-LX1 C432
I upgraded to EMUI 10 using the sd card update method a while ago, and ever since when I boot the phone "your device has loaded a different operating system" shows up.
I searched every thread I could, even this one, and tried a lot of things, but I just can't fix it...
Every time I download a firmware for the SNE-LX1 C432 and unzip it, I always get the SNE-LO1 cust file and preload file, but I can't find the SNE-LX1 cust file and preload file anywhere.
Does anyone know how to get the right cust file and preload file?
Any help is appreciated...
Thanks

your device has loaded a different operating system
i dont know my old cust number please help i just know PCT-L29

Hi,
I have p30 lite, Mar-lx1m(c185e2r2) with wrong operating system, please assist

Your device is corrupt. It can't be trusted and may not work properly

Hello guys,
Can somebody help me? I have a problem with my LG k10 M250.
When I turn on the device, the message appears: "Your device is corrupt. It can't be trusted and may not work properly".
I would like to reinstall the rom stock, but I can't enter the download mode because the phone always restarts. In other words, my device is always in bootloop.
I have downloaded the following files/tools for installation:
1. M250ds10a_03_VIV_BR_DS_OP_0227.kdz
2. LGUnitedMobileDriver_Ver_3.11.3.exe
3. UPPERCUT_1.0.0.0.zip
Is there a way to fix it? Could a test point be an option?
Thanks!

Olá. Estou com o mesmo problema. Conseguiu resolver?

same problem, fml
3K views and no answers
hehe u know what this means ))))

Question Poco F3 bricked cant acces EDL Mode and Fastboot Mode

I have my Poco F3 today brickt when I wanted to install the latest Xiaomi.eu beta (android 12 ) via Fastboot. I do not know if it was because of that, but I have replaced the boot image in the images folder with a magisk patched boot image. that phone no longer turns on I see only a black screen. Even if I tap power+volume down and connect the usb cable (for EDL mode), my pc does not recognize the phone (or do I need special drivers for EDL mode). What do I do now. Can Xiaomi in this state me flash the software on it again? Because someone else has also destroyed his Poco F3 (similar to me) and Xiaomi has repaired it for free because it was in warranty.

F3 dead after flashing error.
I got an error at the begining of the flash, something like "too many files opened" and stop flashing. I aborted the process and now my f3 is dead, black screen, not recovery or fastboot. Windows desn't detects anything. Some help would be...
forum.xda-developers.com
It seems like you are not the only one.

To get into EDL mode you have to open the phone and make a test point but it's very likely that you need an authorized id to flash the firmware

Mine the same, black screen and nothing happens, cant even reach EDL mode or anything. Happened when trying to quit the LOS recovery and installing the EU 12 ROM all went to the trash and now phone doesnt respond to anything

There is an Anti-Rollback feature baked into MIUI to prevent you to reinstall MIUI back. You should never install MIUI using any Custom Recovery or ADB.
1. ONLY use MIFlash. MIFlash stops you to install bad software to your phone. Only certain MIUI ROMs will be accepted by your phone for install. Afterwards you can update to the latest.
2. You need to edit your MIUI ROM to remove the Anti-Rollback lines of code in order to flash it using TWRP or ADB. I believe this is were your mistake was.
About your problem if you PC does not detect your phone at all anymore, i doubt entering EDL by shortcutiing the connectors will change your situation. Your phone may be in EDL but will still not comunicate with the PC. Try specialized service and stop messing with things without understand all the steps needed for this procedure. "Nah' it will be fine" doesn't work all the time as you can see

did you find a solution ?

The97Elite said:
did you find a solution ?
Click to expand...
Click to collapse
You don't need to open the phone, you need to find someone with a Xiaomi authorized account.
You can find them by searching Google.
They will have tunnel to your PC and fix the phone, it costs about €25.

Had the same problem, very annoying. You need to check if the Phone is recognized as a Qualcomm 9008 Device, then you can do the restore, with the help of someone having a authorized MI(?) Account (and pay them, of course...).
Zimmster said:
There is an Anti-Rollback feature baked into MIUI to prevent you to reinstall MIUI back. You should never install MIUI using any Custom Recovery or ADB.
1. ONLY use MIFlash. MIFlash stops you to install bad software to your phone. Only certain MIUI ROMs will be accepted by your phone for install. Afterwards you can update to the latest.
2. You need to edit your MIUI ROM to remove the Anti-Rollback lines of code in order to flash it using TWRP or ADB. I believe this is were your mistake was.
About your problem if you PC does not detect your phone at all anymore, i doubt entering EDL by shortcutiing the connectors will change your situation. Your phone may be in EDL but will still not comunicate with the PC. Try specialized service and stop messing with things without understand all the steps needed for this procedure. "Nah' it will be fine" doesn't work all the time as you can see
Click to expand...
Click to collapse
So, only updates of MIUI are possible through TWRP?
I'm not sure if I like this new world, unbricking devices for money and all those things... coming from a POCO F1 and never had any of those issues....

11214 said:
Você não precisa abrir o telefone, você precisa encontrar alguém com uma conta autorizada da Xiaomi.
Você pode encontrá-los pesquisando no Google.
Eles terão túnel para o seu PC e consertarão o telefone, custa cerca de € 25.
Click to expand...
Click to collapse
somente essas pessoas consegue resolver o poblema ?ontem dei pau no meu tbm, fui passar a .eu via fastboot e demorou dms, fechei e tentei abrir novamente e o cmd acusou que n tinha device conectado, fui reinciar o modo fastboot e a tela apagou e nunca mais ligou kkkkkkkk to ate agr aqui sem ele, amanha vou abrir ele pra pode fazer o test point pra poder passar pra pessoa com a conta autorizada fazer o prodecimento de regravar a rom