Develop Bugs

Emergency recovery hell.............

Got my S9 stuck in the "An Error has occurred while updating software. Use Emergency recovery function in Smart Switch PC software" Smart switch wants a recovery code? Never used it or tried to use it until now.
Any chance I can fix this or is this a paper weight that will light up?

start in download mode and flash the latest firmware corresponding to your model.

angel8502 said:
start in download mode and flash the latest firmware corresponding to your model.
Click to expand...
Click to collapse
Nothing I do will let me get into download mode. Power+Bixby and Volume down just brings back to the screen.

Lord_BB said:
Nothing I do will let me get into download mode. Power+Bixby and Volume down just brings back to the screen.
Click to expand...
Click to collapse
Keep those buttons pressed until the phone reboots twice, see if the second boot enters DL mode

*Detection* said:
Keep those buttons pressed until the phone reboots twice, see if the second boot enters DL mode
Click to expand...
Click to collapse
So I held the 3 buttons, it quick vibrated and then gave the screen where you volume up to get into DL mode....let reboot again and this hit the volume up and still no DL mode.

Lord_BB said:
So I held the 3 buttons, it quick vibrated and then gave the screen where you volume up to get into DL mode....let reboot again and this hit the volume up and still no DL mode.
Click to expand...
Click to collapse
You are trying this with the phone powered off aren't you?

Lord_BB said:
So I held the 3 buttons, it quick vibrated and then gave the screen where you volume up to get into DL mode....let reboot again and this hit the volume up and still no DL mode.
Click to expand...
Click to collapse
So you can get to the first stage of DL mode where it asks you to press Vol up to continue, and when you press Volume up it reboots the phone?
If that is the case you have a problem as Download mode is nothing to do with firmware, it is hard coded, if that's corrupted you'll be needing to send it off for repair I'd think

Wait... What?!? Did i read you right?
From the error screen, what you did was hold vol - home and power. Until you saw screen saying vol up to enter dl mode, but then you kept holding until it rebooted again back too the error, and pressing up their does nothing?
If thats all right, you messed upp.....
Next time, as soon as you get to the screen thay says press vol + the enter dl mode, release everything, wait 5 secs and then press vol + like it says and should enter dl mode normally and you can flash with Odin....
If it wont enter dl mode from that screen, you have seriois issue, but it will never go from the error screen, you just need to hold the buttons on restart from the error to get into dlmode again
Jist an addon: some times ive noticed on some devices, when your at the download mode screen trying to press vol + to enter, somtimes you need to click it a few times for it to grab it, ive had it not work on one oress but work after 3 or 4 repeared ones... Could be sticky buttons but just saying

Lord_BB said:
Got my S9 stuck in the "An Error has occurred while updating software. Use Emergency recovery function in Smart Switch PC software" Smart switch wants a recovery code? Never used it or tried to use it until now.
Any chance I can fix this or is this a paper weight that will light up?
Click to expand...
Click to collapse
Were u able to fix it
I got the same problem 2 days back
Were u flashing with odin ?

I have fixed the problem already
bunnykons said:
Were u able to fix it
I got the same problem 2 days back
Were u flashing with odin ?
Click to expand...
Click to collapse
I am not an expert but the next thing you will read is what worked with my phone
The model is SM-9600 Galaxy s9 from Mexico with Telcel carrier. I was trying to flash a stock firmware without bloatware so in the middle of the process with odin, something went wrong and FAIL appeared. I got scared and look in every blog but no answer.
Instrucciones en Español abajo.
What it worked for me was:
1.- Download the Smart Switch for PC and update the software if it makes you the require, I think the problem was with the drivers.
2.- Press VOL -, Bixby and Power, you'll get the first screen of DL mode.
3.- Pess VOL+; you will get the Error screen. (You leave it like that)
4.- Run ODIN, and load all the files AP,BL, CP, CSC (you previouly have to download the firmware for you phone. I used Sammobile).
5.- Connect you phone with your PC.
6.- Press Start in ODIN and the cell will be detected and the flash will start and finish in the correct way in the upper left corner with red letters will appear a notice that says "FRP Unlocked" and other stuff.
I Hope this works for you too.
GOOD LUCK:good:
Que tal compañeros que hablan español.
Aquí les va un poco de contexto. Mi telefono es un Galaxy S9 SM-9600, de México y con Telcel. Mi intención era flashear un firmware que estuviera de libre de bloatware de Telcel, así que bajé la versión MXO de Sammobile.
Este proceso ya lo había hecho anteriormente con un Galaxy S6 y recientemente con un Galaxy J6 utilizando la herramienta ODIN.
Todo iba bien hasta que a mitad del proceso algo salió mal y me apareció el letrero de FAIL y se reinició el celular y me salio la infame pantalla de ERROR.
Lo que me funcionó fue lo siguiente.
1.- Descargue Smart Swithc para PC. y lo instale y lo actualicé como me pidió el programa. (Al parecer el problema fueron los controladores del teléfono.
2.- Con el celular desconectado de la PC, presioné los botones de Bixby, VOL - y Power al mismo tiempo. hasta que me apareció la primer pantalla del DL Mode.
3.- Presioné el botón Vol + y vuelve aparecer la pantalla de error (no importa así déjala)
4.-En el programa ODIN cargué los paquetes que vienen con el firmware, AB, BL, CP y CSC.
5.- Conecté el Celular a la PC y le dí Start a ODIN, en ese momento mi celular fue detectado por ODIN y en la pantalla del celular, en la parte superior izquierda sale la leyenda con letras rojas "FRP Unlocked" y dice algo mas pero no recuerdo y entonces comenzó a realizar el Flash del Firmware sin problemas.
Espero que les funcione también.
Buena Suerte. :good:

Thanks and this worked for me

Odin frozen 75% through flash
frickin_boy said:
*edited down to just instructions by Z1stCNTRYdgtlBOY
1.- Download the Smart Switch for PC and update the software if it makes you the require, I think the problem was with the drivers.
2.- Press VOL -, Bixby and Power, you'll get the first screen of DL mode.
3.- Pess VOL+; you will get the Error screen. (You leave it like that)
4.- Run ODIN, and load all the files AP,BL, CP, CSC (you previouly have to download the firmware for you phone. I used Sammobile).
5.- Connect you phone with your PC.
6.- Press Start in ODIN and the cell will be detected and the flash will start and finish in the correct way in the upper left corner with red letters will appear a notice that says "FRP Unlocked" and other stuff.
Click to expand...
Click to collapse
I tried to root my SM-G960F/DS following the updated instructions from https://highonandroid.com/android-smartphones/how-to-root-galaxy-s9-or-s9-plus-exynos-supersu/ and got stuck in boot loop (sorry, new user so I can't post hyperlinks yet).
I re-entered download mode, updated to all the latest versions of twrp (3.2.3-0), no-verify-opt-encrypt (6.0), samsung-antiroot-removal (2.4), G965_PIE_Root_for_OEM_issue_devices (5), and Magisk (18.0), but ran into the same bootloop problem.
I then tried to reload samsung's stock 9.0 through smart_switch, but it wouldn't recognize my device. When I enter Emergency Software Recover, the only option it gives me is to recover using a recovery code.
Finally, I tried the instructions above from frickin_boy, but the flash stopped after ~75% completion. This is as far as I can get with it, regardless of which version of the samsung stock I try to flash. Can anyone help me with this?

Had this happen to my s9. Booted only into emergency mode with smartswitch instructions. Smartswitch didn't work wouldn't take my serial number. While it's in emergency mode Odin will work.

quikt said:
Had this happen to my s9. Booted only into emergency mode with smartswitch instructions. Smartswitch didn't work wouldn't take my serial number. While it's in emergency mode Odin will work.
Click to expand...
Click to collapse
Just gave it a go from emergency mode instead of download mode. I was able to connect to Odin as you said, but it still stalled out at ~75% complete.

It may be worth trying same steps but with a different official odin firmware. Oreo or pie

I couldn't get any of the previous versions of Odin to work. But I was able to find the 14 Feb version of the firmware (instead of 14 Jan from SamMobile), which flashed correctly.
Latest firmware: https://forum.xda-developers.com/galaxy-s9-plus/how-to/official-stock-firmware-thread-samsung-t3764479

HELPP
Hi
I would like to know how you fixed it. i wanted to flash a rom and it got stucked at "Use the Emergency recovery function in the Smart Switch PC software.". i tried the following instruction but it says "Unsupported device"
HELPPP

apparently odin still works when in emergency recovery mode.. (just like in download mode). So use odin to reinstall.

any ideas on preventing auto reboot every 15 seconds? I got it through the flashing process earlier today, but since the last fail it won't stay on for long enough to flash anything else. I put both the CSC and HOME_CSC file into odin (HOME_CSC in CSC slot, CSC in CP slot..) and it got hung up 3/4 of the way through for a really long time (like at least an hour, likely more), so I cancelled it and tried again which came back failed. Prior to this the message was that it wouldn't run with unauthorized firmware (it had stock firmware, I just did a reset) and now it says to use the emergency recovery. Emergency recovery both doesn't recognize it and also it won't stay on long enough to use anyway. I can sometimes get download mode but it reboots regardless. If it isn't plugged in though, the screen flashes for a fraction of a second but won't turn on. Any help is greatly appreciated!

thecirclethinker said:
any ideas on preventing auto reboot every 15 seconds? I got it through the flashing process earlier today, but since the last fail it won't stay on for long enough to flash anything else. I put both the CSC and HOME_CSC file into odin (HOME_CSC in CSC slot, CSC in CP slot..) and it got hung up 3/4 of the way through for a really long time (like at least an hour, likely more), so I cancelled it and tried again which came back failed. Prior to this the message was that it wouldn't run with unauthorized firmware (it had stock firmware, I just did a reset) and now it says to use the emergency recovery. Emergency recovery both doesn't recognize it and also it won't stay on long enough to use anyway. I can sometimes get download mode but it reboots regardless. If it isn't plugged in though, the screen flashes for a fraction of a second but won't turn on. Any help is greatly appreciated!
Click to expand...
Click to collapse
Did you ever get this issue resolved?? I have the same exact issue with an S7 that was bricked during an odin firmware installation. I've also been looking for an older version of Samsung SmartSwitch. I believe a version older than 4.xx might allow for a specific model in the emergency recovery setup parameters instead of autodetect. Can anyone find that older software?

comando fastboot bloqueado con bootloader desbloqueado ROM v10.3.5.0 Global

2186/5000
Hi. I have a Mi Max 3 that I just bought on Alixpress. I bought it at this distributor for two reasons. First because they usually come with the bootloader unlocked and second because it is cheaper. However, I have received an official Global ROM, which was immediately updated as soon as I turned on the smartphone after its configuration. I was updated to the MIUI Global 10.3.5.0 PEDMIXM version. By having the bootloader unlocked you could use the adb / fastboot tools from the PC with the options for developers activated and the USB debugger activated. I understand that with the latest versions of the Global ROM in this model you have activated Antirollback. I put it in fastboot mode and connected to the PC with the USB cable, I entered the command "fastboot boot twrp-3.3.1-0-nitrogen.img" (I made sure that the TWRP was the corresponding version, more conveniently "twrp-3.3. 1-0-nitrogen.img "). To my surprise, I got stuck without getting an answer for an indefinite period (I mean nothing). To exit the lock, press the power button. Then I wanted to find out what level of anti-rollback the ROM had with the order "fastboot getver anti". The exact same thing happened. In other words, it has some type of protection that blocks the "fastboot" command, but there is no way of knowing what protection the Global ROM is activated. In this way I have the bootloader unlocked but due to a protection that I don't know I cannot put the recovery and install another ROM.
To say that I tried a method that theoretically deactivates the anti-rollback that is "fastboot flash antiarbpass dummy.img".
The result is always the same block with no response. Also, you don't get any error messages that report what is happening. In adb mode it works without problems. Can you tell me what's going on? I presume that it is the ROM that was given that has some type of protection not yet cataloged. The cable and the tools used are more than proven. I did all this under Linux and then under Windows with the same result. Let's see if you can help me with this. By the way, if you want, I can make you a beta tester under Linux. Thanks and best regards.
Enviar comentarios
Historial
Traducións gardadas
Comunidade

Try this Tool:
https://www.xiaomitool.com/V2/
Twrp: orangefox-recovery-project

No me sirve
Creo que no me sirve. Gracias

Ya está resuelto
Era el puerto USB 3.0 de la placa base. Se me ocurrio usar una de los puertos USB 2.0 y sonó la flauta.
Lo digo por si alguien tiene el mismo problema.

Your device is corrupt. It can't be trusted and may not work properly

Hello guys,
Can somebody help me? I have a problem with my LG k10 M250.
When I turn on the device, the message appears: "Your device is corrupt. It can't be trusted and may not work properly".
I would like to reinstall the rom stock, but I can't enter the download mode because the phone always restarts. In other words, my device is always in bootloop.
I have downloaded the following files/tools for installation:
1. M250ds10a_03_VIV_BR_DS_OP_0227.kdz
2. LGUnitedMobileDriver_Ver_3.11.3.exe
3. UPPERCUT_1.0.0.0.zip
Is there a way to fix it? Could a test point be an option?
Thanks!

Olá. Estou com o mesmo problema. Conseguiu resolver?

same problem, fml
3K views and no answers
hehe u know what this means ))))

Samsung A30s/SM-A307FN TWRP and ROOT

Hi guys this is how to make twrp for Samsung a30s and root it.
this method is working with all versions from android 9 to 11 tested
i didn't test it on sm-a307gn / u / f
but i think it will work
first you need to unlock your bootloader
( that will wipe your device so be sure to backup of your data )
WARRNING YOUR WARRNTY WILL BE VOID
Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Enable OEM unlock and USB debugging options ( Settings -> Developer options )
Download and Install Samsung Mobile Phone Drivers ( ignore this if you have installed it ) Drivers Download
Enter Download Mode ( Connected USB Cable to PC, Turn Power off the phone, Press and hold Volume Down + Volume Up keys together then while pressing these keys connecting the phone to PC with USB Cable Data, release all keys when Download Mode appears ).
In Download Mode you see the long press Vol Up option to enter Device Unlock Mode. Unlock the bootloader ( that will wipe your device so be sure to backup of your data )
After Bootloader unlock, the phone will reboot and make sure the phone connected to the internet
now repeat (1) and go to devolper options you will found that OEM unlock is checked with gray and you cannot change it
now your bootloader will be unlocked successfully .
( if you want to lock the bootloader again do the same instrecouns )
now download odin from here
before flashing check odin options and uncheck the Auto Reboot
reboot your device into download mode again and flash this TWRP Like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
after flash is done now hold the volum down and power for a 7 sec when the screan go black realese the voulm down and press volum up with power button for 3 sec after this reales the power and still pressing on voulm up until the device boot into twrp
now be carfull with me first go to wipe and press on format data and type yes
now go home and press on mount
and connect usb to you PC and download this files ROOT Files after extracting the files copy them to the Internal Storage
now first flash multidisabler-samsung-3.1.zip
then flash Magisk-v23.0.zip
then reboot to your system
you will need to setup you device offline then after finishing setting the device connect to internet and open Magisk it will download and install then open the app it will show you to complete the instalition by reboot agree then your phone will reboot
now your device is rooted succefully
password for all files : B0gy09
pleas support me it's my first post and i post about this becouse it was so hard to found this files and make this device rooted succefully and if there any bugs pleas contact me
Whatsapp : +201151025596
Telegram : +201151025596
Facebook : bogy09
Instagram : mostafaasalemm

@mostafasalem423 THREAD CLOSED.
Please advise the moderators team (best via the report function) to re-open your thread when ready to provide links to a different filehost.
Regards
Oswald Boelcke
Senior Moderator

mostafasalem423 said:
Hi guys this is how to make twrp for Samsung a30s and root it.
this method is working with all versions from android 9 to 11 tested
i didn't test it on sm-a307gn / u / f
but i think it will work
first you need to unlock your bootloader
( that will wipe your device so be sure to backup of your data )
WARRNING YOUR WARRNTY WILL BE VOID
Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Enable OEM unlock and USB debugging options ( Settings -> Developer options )
Download and Install Samsung Mobile Phone Drivers ( ignore this if you have installed it ) Drivers Download
Enter Download Mode ( Connected USB Cable to PC, Turn Power off the phone, Press and hold Volume Down + Volume Up keys together then while pressing these keys connecting the phone to PC with USB Cable Data, release all keys when Download Mode appears ).
In Download Mode you see the long press Vol Up option to enter Device Unlock Mode. Unlock the bootloader ( that will wipe your device so be sure to backup of your data )
After Bootloader unlock, the phone will reboot and make sure the phone connected to the internet
now repeat (1) and go to devolper options you will found that OEM unlock is checked with gray and you cannot change it
now your bootloader will be unlocked successfully .
( if you want to lock the bootloader again do the same instrecouns )
now download odin from here
before flashing check odin options and uncheck the Auto Reboot
reboot your device into download mode again and flash this TWRP Like this
View attachment 5359197
after flash is done now hold the volum down and power for a 7 sec when the screan go black realese the voulm down and press volum up with power button for 3 sec after this reales the power and still pressing on voulm up until the device boot into twrp
now be carfull with me first go to wipe and press on format data and type yes
View attachment 5359199View attachment 5359201
now go home and press on mount
View attachment 5359203
and connect usb to you PC and download this files ROOT Files after extracting the files copy them to the Internal Storage
now first flash multidisabler-samsung-3.1.zip
then flash Magisk-v23.0.zip
then reboot to your system
you will need to setup you device offline then after finishing setting the device connect to internet and open Magisk it will download and install then open the app it will show you to complete the instalition by reboot agree then your phone will reboot
now your device is rooted succefully
password for all files : B0gy09
pleas support me it's my first post and i post about this becouse it was so hard to found this files and make this device rooted succefully and if there any bugs pleas contact me
Whatsapp : +201151025596
Telegram : +201151025596
Facebook : bogy09
Instagram : mostafaasalemm
Click to expand...
Click to collapse
Hi I had SM 307GN/DS Samsung with Android 11, I'll try it. Thank you brother.
mostafasalem423 said:
Hi guys this is how to make twrp for Samsung a30s and root it.
this method is working with all versions from android 9 to 11 tested
i didn't test it on sm-a307gn / u / f
but i think it will work
first you need to unlock your bootloader
( that will wipe your device so be sure to backup of your data )
WARRNING YOUR WARRNTY WILL BE VOID
Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Enable OEM unlock and USB debugging options ( Settings -> Developer options )
Download and Install Samsung Mobile Phone Drivers ( ignore this if you have installed it ) Drivers Download
Enter Download Mode ( Connected USB Cable to PC, Turn Power off the phone, Press and hold Volume Down + Volume Up keys together then while pressing these keys connecting the phone to PC with USB Cable Data, release all keys when Download Mode appears ).
In Download Mode you see the long press Vol Up option to enter Device Unlock Mode. Unlock the bootloader ( that will wipe your device so be sure to backup of your data )
After Bootloader unlock, the phone will reboot and make sure the phone connected to the internet
now repeat (1) and go to devolper options you will found that OEM unlock is checked with gray and you cannot change it
now your bootloader will be unlocked successfully .
( if you want to lock the bootloader again do the same instrecouns )
now download odin from here
before flashing check odin options and uncheck the Auto Reboot
reboot your device into download mode again and flash this TWRP Like this
View attachment 5359197
after flash is done now hold the volum down and power for a 7 sec when the screan go black realese the voulm down and press volum up with power button for 3 sec after this reales the power and still pressing on voulm up until the device boot into twrp
now be carfull with me first go to wipe and press on format data and type yes
View attachment 5359199View attachment 5359201
now go home and press on mount
View attachment 5359203
and connect usb to you PC and download this files ROOT Files after extracting the files copy them to the Internal Storage
now first flash multidisabler-samsung-3.1.zip
then flash Magisk-v23.0.zip
then reboot to your system
you will need to setup you device offline then after finishing setting the device connect to internet and open Magisk it will download and install then open the app it will show you to complete the instalition by reboot agree then your phone will reboot
now your device is rooted succefully
password for all files : B0gy09
pleas support me it's my first post and i post about this becouse it was so hard to found this files and make this device rooted succefully and if there any bugs pleas contact me
Whatsapp : +201151025596
Telegram : +201151025596
Facebook : bogy09
Instagram : mostafaasalemm
Click to expand...
Click to collapse

Is it require the Magisk Manager first to installed??

realizar todos los pasos en mi a30s 307g y el root es un éxito, pero tengo un problema con la sim car, la señal solo me dura unos segundos y se va y luego regresa asi todo el tiempo, no puedo hacer llamadas porque se me cortan , todo lo demás funciona bien
Traducido por GT: Hice todos los pasos en mi a30s 307g y la raíz es exitosa, pero tengo un problema con el sim car, la señal solo dura unos segundos y desaparece y luego vuelve así todo el tiempo. , No puedo hacer llamadas porque se me cortan, todo lo demás funciona bien

TWRP link Didn't WORK,,pls fix it

works great! Thanks

Omor_Faruk said:
TWRP link Didn't WORK,,pls fix it
Click to expand...
Click to collapse
It's working man

[email protected] said:
Is it require the Magisk Manager first to installed??
Click to expand...
Click to collapse
No not require any thing on your phone

[email protected] said:
Hi I had SM 307GN/DS Samsung with Android 11, I'll try it. Thank you brother.
Click to expand...
Click to collapse
Did it work for you ?

Terrorduanra420 said:
works great! Thanks
Click to expand...
Click to collapse
I have a307fn btw

I have have a A307FN, and ive run into an issue after installing TWRP. Everything went fine during install, but after booting the phone I noticed the phone was constantly losing cell signal and mobile data connection. I had to revert back to stock as I was unable to resolve the issue. Has anyone came across this problem, or was it something i did wrong?

Works perfectly! Thanks for the detailed instructions!

Terrandroid said:
I have have a A307FN, and ive run into an issue after installing TWRP. Everything went fine during install, but after booting the phone I noticed the phone was constantly losing cell signal and mobile data connection. I had to revert back to stock as I was unable to resolve the issue. Has anyone came across this problem, or was it something i did wrong?
Click to expand...
Click to collapse
Contact me on messenger i will help you

Terrandroid said:
I have have a A307FN, and ive run into an issue after installing TWRP. Everything went fine during install, but after booting the phone I noticed the phone was constantly losing cell signal and mobile data connection. I had to revert back to stock as I was unable to resolve the issue. Has anyone came across this problem, or was it something i did wrong?
Click to expand...
Click to collapse
Same problem here

You have to make sure that you activate usb dumping and oem unlock

Root

Hello
My phone is Samsung A30S SAM-A307fn
I rooted the phone exactly according to the steps.
But the problem is that the SIM cards are disconnected and connected every 2 minutes.

danteaurus said:
realizar todos os passos em mi a30s 307g y el root es un éxito, pero tengo un problem con la sim car, la señal solo me dura unos segundos y se va y luego regresa asi todo el tiempo, no puedo hacer llamadas porque se me cortan , todo lo demás funciona bem
Traducido por GT: Hice todos los los pasos en mi a30s 307g y la raíz es exitosa, pero tengo un problema con el sim car, la señal solo dura unos segundos e desaparece y luego vuelve así todo el tiempo. , No puedo hacer llamadas porque se me cortan, todo lo demás funciona bien
Click to expand...
Click to collapse
Estou com o mesmo problema, você conseguiu resolver?
Mod translation via GT: I have the same problem, did you manage to solve it?

Bro tell me that No Need to Flash any AP file ? Means Flash Firmware no need ?

Question ramdump slpi issue

hi guys , recently i got
the problem with my f3
My phone's memory is automatically filled with a file called ramdump slpi and no matter what I do, I can't get rid of it ,it filed almost 58GB of my space and worst thing is my miui crach! my fingerprint works after 10 seconds my camera freeze . i tried every possible solutions which i found in youtube , google ... i flashed new rom with miflash with clean install i installed twrp and wiped every single things which i could , you just name it .. i heard xda is most professional web site for cellphones so i decided to write here then maybe find some solution , I'll be so greatfull if someone help me on this ?

from what short reserch I did I would install a asop rom

tonibermg said:
hi guys , recently i got
the problem with my f3
My phone's memory is automatically filled with a file called ramdump slpi and no matter what I do, I can't get rid of it ,it filed almost 58GB of my space and worst thing is my miui crach! my fingerprint works after 10 seconds my camera freeze . i tried every possible solutions which i found in youtube , google ... i flashed new rom with miflash with clean install i installed twrp and wiped every single things which i could , you just name it .. i heard xda is most professional web site for cellphones so i decided to write here then maybe find some solution , I'll be so greatfull if someone help me on this ?
Click to expand...
Click to collapse
Did you try clean install via mifalsh before messing with twrp?
Select an older ROM , mifalsh it and use it like that for a while with no modifications - root , twrp , anything.
What are you deleting ? ( There shouldn't be anything you need to delete after clean flash )
If you still have ramdump issues idk... Changing to AOSP might not necessarily solve the underlying problem that's causing this
( If it's hardware , then possibly cpu / ram chip solder balls are failing )
( If it's not hardware then I'd pay one of those guys on telegram and ask for a deep flash - sahara protocol flashing, idk what they call it )

Rstment ^m^ said:
Did you try clean install via mifalsh before messing with twrp?
Select an older ROM , mifalsh it and use it like that for a while with no modifications - root , twrp , anything.
What are you deleting ? ( There shouldn't be anything you need to delete after clean flash )
If you still have ramdump issues idk... Changing to AOSP might not necessarily solve the underlying problem that's causing this
( If it's hardware , then possibly cpu / ram chip solder balls are failing )
( If it's not hardware then I'd pay one of those guys on telegram and ask for a deep flash - sahara protocol flashing, idk what they call it )
Click to expand...
Click to collapse
Thank you for your reply , i am not sure but i think i didn't clean install with mi flash before messed up with twrp . Actually everythings is possible , i have done many formatting and wipe in twrp and orangfox , then i realized what happened , i tried to wipe deeply by twrp and orange fox . But While i tried to wipe in orange fox i got this error which " mounting is not possible or we are able to mount or there is nothing to mount " this was biggest error i got .yes I tried to install pixel experience and miui cxs rom . i thought by myself maybe it's be the hardware issue too . oh one question my poco f3 is 128 GB and when i wiped everythings by twrp and orange fox all the free space i got is something about 108GB , is that normal ? I dont know maybe i wiped something i shouldn't , so as i understand which u said miflash supposed to cleaning everthings even if i messed up in twrp or orange fox ? By the way in twrp my both slot A and B is ok . If u see the photos every file in ramdump is same size 29mb and every 20 seconds one file shows up there . I thought by myself maybe it's connected to encryption or decryption stuff , just silly idea i guess .
and thank you so much for your kindness which u want to pay for deep flash , i appreciate man but it's not necessary . I would pay myself

that ramdump file filled 75GB of my storge and i got this error now .

tonibermg said:
that ramdump file filled 75GB of my storge and i got this error now .
Click to expand...
Click to collapse
don't use twrp , miflash with clean all option and leave it like that

did the solution above work? I also have this problem now

A mi me paso al intalar el miui14 en mi poco f3 todo iba bien ,muy rapido y pesa poco pero al instalar telegram se me puso loco a consumir espacio borrando arvhivos crush todo el dia ya llega a un punto que solo queda volver a flashear,dos veces me paso y siempre con el telegram ,lo solucione volviendo otra vez al miui 13 y ahora con lelegram intalado no tengo consumo ninguno