Develop Bugs

Stuck Splash Screen help me-please

my UNI after uproom can not start.it only can perform 02 picture.so my UNI now can not be use.i tried to up many different room but it can not active.i hope everybody can held me solve this problem.thanks so much.hope to receive your reply

bestboytq said:
my UNI after uproom can not start.it only can perform 02 picture.so my UNI now can not be use.i tried to up many different room but it can not active.i hope everybody can held me solve this problem.thanks so much.hope to receive your reply
Click to expand...
Click to collapse
Ở HN có dịch vụ thay Disk.On.Chip đó bestboytq, trên này cũng bó tay thôi, chia buồn ***g bạn, con chip đó khoảng 12$. Xem lại trong topic ở MF đi, có người cho địa chỉ đó, nếu ở HCM thì dễ rồi.

Hê hê ! nó là người nước ngoài chứ đâu phải là người việt mà bạn trả lời tiếng việt ! chắc nó đang đi kiếm người phiên dịch đó !

Search and you shall find:
FOR ALL THOSE WHO STUCK IN THE BOOT SCREEN OF UNIVERSAL
(full) http://forum.xda-developers.com/showthread.php?t=259003
(mobile) http://forum.xda-developers.com/archive/index.php/t-259003.html
The MTTY tool enables you to determine whether your internal flashdisk is defective. Once that is confirmed you are out of luck, the device will have to be repaired by the manufacturer.

Have u tried to upgrade through bootloader mode

bac shinechi that la dinh cao.minh tham gia ben MF nhung dao nay MF ko vao dc nen mo len day nho cac chuyen gia giup do,nhung co le cung bo tay roi.minh o HN,bac biet co cho nao thay D-o-C uy tin va chat luong thi chi cho a e voi.thanks

i am sorry everybody,i do not know what is "mtty" i can not find it.if someone know please tell me and held me how to use it.thanks

bestboytq said:
i am sorry everybody,i do not know what is "mtty" i can not find it.if someone know please tell me and held me how to use it.thanks
Click to expand...
Click to collapse
I have attached the program for you.
instructions:
-disconnect USB cable
-disable USB connection in desktop ActiveSync
-connect USB cable
-start mtty
-create new connection and select USB from ports
press enter to see USB prompt in mtty:
USB>
type (dont copy&paste):
task 28
and press enter
If the result is the following then you are out of luck:
flFormatPhysicalDrive:status=23
DOC_format failed!

BTW just for my knowledge i would also like to know wat this mtty is ?

niketkumar said:
BTW just for my knowledge i would also like to know wat this mtty is ?
Click to expand...
Click to collapse
Google, and thou shalt find ..
MTTY is some kind of terminal emulation software, and in this case it is used to communicate to serial and/or USB enabled devices. On the HTC devices (including the Universal) it enables you to issue a selection of commands that allow you to read the status of som eof the components, to clear the bootloader flags, to format the internal flashdisk etc etc
(This program should of course be used with precautions)
In this particular case, the task 28 command issues a format command to the internal DOC=DiskOnChip that hosts the operating system after initialization. When performing a hard reset, so either selecting clear storage/1234 or reset+softkeys/clear storage, the internal flash disk is reinitialized, reformatted, and the OS is put back on the internal flash disk, thus preparing the device for its first use.
The behaviour above indicates a defective internal flash disk, and the task 28 command verifies that. If the result is "format failed" then there is no other solution then to send the device back to qtek/o2/htc etc...

have u ever tried to do with your method.your solution is very good,but can you show me more carefully.thanks so much

Wiz said:
Google, and thou shalt find ..
MTTY is some kind of terminal emulation software, and in this case it is used to communicate to serial and/or USB enabled devices. On the HTC devices (including the Universal) it enables you to issue a selection of commands that allow you to read the status of som eof the components, to clear the bootloader flags, to format the internal flashdisk etc etc
(This program should of course be used with precautions)
In this particular case, the task 28 command issues a format command to the internal DOC=DiskOnChip that hosts the operating system after initialization. When performing a hard reset, so either selecting clear storage/1234 or reset+softkeys/clear storage, the internal flash disk is reinitialized, reformatted, and the OS is put back on the internal flash disk, thus preparing the device for its first use.
The behaviour above indicates a defective internal flash disk, and the task 28 command verifies that. If the result is "format failed" then there is no other solution then to send the device back to qtek/o2/htc etc...
Click to expand...
Click to collapse
Thanx for the info.

stuck
dude i also had the same problem. my phone was working perfectly fine. i dont kno what tickeled my ass nd i tried upgrading the radio with the original club-imate rom upgrade file. upgrade was successful but when i tried the hard reset thing i got stuck at the blue color booting screen nd now ma phone is not completing the boot. i have a jasjar. as mentioned in this forum i downloaded the mtty utility nd tried running task 28. unfortunately the result is "format failed". as per niketkumar my phone is ****ed now. niket do i have some other remedy bro rather than going to the workshop. my exams are goingon nd the workshop here is in new delhi which is aroound 600 miles from jodhpur where m studying presently. is there any other way out. do u have ne idea as to what would this fixing up cost me coz my phone is outa warranty period nd its a second hand one. with my figers crossed m waiting 4 a reply.................................

hitesh8263 said:
dude i also had the same problem. my phone was working perfectly fine. i dont kno what tickeled my ass nd i tried upgrading the radio with the original club-imate rom upgrade file. upgrade was successful but when i tried the hard reset thing i got stuck at the blue color booting screen nd now ma phone is not completing the boot. i have a jasjar. as mentioned in this forum i downloaded the mtty utility nd tried running task 28. unfortunately the result is "format failed". as per niketkumar my phone is ****ed now. niket do i have some other remedy bro rather than going to the workshop. my exams are goingon nd the workshop here is in new delhi which is aroound 600 miles from jodhpur where m studying presently. is there any other way out. do u have ne idea as to what would this fixing up cost me coz my phone is outa warranty period nd its a second hand one. with my figers crossed m waiting 4 a reply.................................
Click to expand...
Click to collapse
Dont worry at all try to reflash it back with the complete ROM upgrade and if it is not detected by ur comp. then try it in the Bootloader mode .

niket
niket, i have tried it several times brother. i have upgraded/reflashed the rom version available at the clubimate site several times but the results are same. no success. i have done it in the bootloader mode only. my bootloader update has been successful. it shows that v1.01 has bee uploaded to my device. when i reflash the rom it every time stucks at the blue color boot screen and then there is no change. as suggested in the forum i had downloaded the mtty utility software and ran task 28. it shows document format error or some crap like that. according to the forum participants my device has a corrupted flash card and i need to get it fixed. in india we have the service center at delhi nd when i told them about ma problem they have also suggeted me to get it changed sice it is corrupted nd of no use now. they say that no matter how many times i run the upgrade now it wont help me. they gave the following reason:
since the flash card is corrupted, though the upgrade will be successful as the whole flash card is overwitten but when i will boot my device the boot files wont be read by my device bcoz of corrupt flash card and hence the device wont boot my os. they say its a hardware problem nd the sofwares have nothing to do with it.
if you have a remedy for me then plz do reply. is it possible to fix the card by formatting it and if yes then how to run the format on internal flash drive.
m badly stuck man. if nuthin works i will get it replaced this sunday i.e. 12/11/06.

hitesh8263 said:
though the upgrade will be successful as the whole flash card is overwitten but when i will boot my device the boot files wont be read by my device bcoz of corrupt flash card and hence the device wont boot my os. they say its a hardware problem nd the sofwares have nothing to do with it.
if you have a remedy for me then plz do reply. is it possible to fix the card by formatting it and if yes then how to run the format on internal flash drive.
m badly stuck man. if nuthin works i will get it replaced this sunday i.e. 12/11/06.
Click to expand...
Click to collapse
Sorry, the internal DiskOnChip is divided in three parts, the part where the rom goes, the part where extended_rom goes and the part where your operating system will end up for first use. It is that last part that has become corrupted. You can flash perfectly to area 1 and 2, but it is area 3 that you will ultimately need. That 3rd area is what is initialized when you select clear storage or press the two soft keys+reset.
Since the error code is format failed, there is no solution but to send it back to the manufacturer of supplier ...

hitesh8263 said:
if nuthin works i will get it replaced this sunday i.e. 12/11/06.
Click to expand...
Click to collapse
So wats the news ? Got it fixed , How much did it cost to u ?

Wiz said:
I have attached the program for you.
instructions:
-disconnect USB cable
-disable USB connection in desktop ActiveSync
-connect USB cable
-start mtty
-create new connection and select USB from ports
press enter to see USB prompt in mtty:
USB>
type (dont copy&paste):
task 28
and press enter
If the result is the following then you are out of luck:
flFormatPhysicalDrive:status=23
DOC_format failed!
Click to expand...
Click to collapse
i had the result below
:
flFormatPhysicalDrive:status=23
DOC_format failed!
what should i do ???

Wiz said:
Sorry, the internal DiskOnChip is divided in three parts, the part where the rom goes, the part where extended_rom goes and the part where your operating system will end up for first use. It is that last part that has become corrupted. You can flash perfectly to area 1 and 2, but it is area 3 that you will ultimately need. That 3rd area is what is initialized when you select clear storage or press the two soft keys+reset.
Since the error code is format failed, there is no solution but to send it back to the manufacturer of supplier ...
Click to expand...
Click to collapse
When I issue the task 28 command the format is successful but I am still stuck at the splashscreen.

Wiz said:
I have attached the program for you.
instructions:
-disconnect USB cable
-disable USB connection in desktop ActiveSync
-connect USB cable
-start mtty
-create new connection and select USB from ports
press enter to see USB prompt in mtty:
USB>
type (dont copy&paste):
task 28
and press enter
If the result is the following then you are out of luck:
flFormatPhysicalDrive:status=23
DOC_format failed!
Click to expand...
Click to collapse
hey sorry to bump an old topic.
Im trying to troubleshoot / fix my Harrier (and my PDA2k is playing up as well ffs) and I'm having problems following these instructions.
I open up mtty, but there doesnt seem to be any option to select USB as a connection. There is only COM1 and COM2 ports.
Where do i go from here?
im using v1.42 on WinXP pro.

Lenovo S660 Flashing Guide

*This guide is for getting back alive a phone from soft brick issue/Boot loop*
*Note: I am not responsible for any kind of damage to your phone.*
*Because whatever is done, is done by you*
*Read the guide totally before flashing*
*Just follow the instructions properly*
Firstly download & extract MT6582 USB VCOM drivers from the internet
Get the zip of flashing tool & firmware from here
https://docs.google.com/uc?id=0B3zai8xX-XsycnNGUmpMUkNjcmc (Don't own this link )
Now you are ready move on for the upcoming process.
1. Now Extract the Lenovo_S660_ROW_S062_141126_(by_xdafirmware.com).zip
2. Then go into the extracted folder and open the Sp flash tool folder.
3. Then open flash_tool.exe from it.
4. Select scatter loading
5. Go inside the extracted folder and go inside the Firmware folder and select MT6582_Android_scatter.txt
6. Now you will see all files loaded.
Be sure you have selected the download only option, never use others!! , if you face a problem tell me
7. As you select the scatter text the software gets all the necessary files that are needed for flashing, it’s because they are in the same folder, so now we can directly continue towards main flashing.
Main flashing
1. Make sure your usb cable is ok.
2. (Confirmation) this guide is for softbrick phones.
Now when you are totally ready.
1. Remove the battery of the phone.
2. now try connecting the phone without battery, keep the device manager open, and the connect the cable to the phone, if you see installing usbvcom driver you are good to go, if you didn't see anything then try with (battery) mostly in my case it was without battery.
i am unsure. please check it. it won't harm your phone, but don't try while flashing try it before flashing. Don't try anything while flashing!!, once you find the method, your computer will be installing driver.(keep the device manager open for better understanding. (if you are still unsure of something, don't start flashing) Ask me anything on facebook - for instant response.
3. once you have installed the driver, and ready to move on.
4. Then click the download button on the software flash tool.
5. Now in seconds it will load files and it will wait for your phone to connect, it will show searching.
7. So now its time for flashing.
Now connect the phone with usb cable(without battery/with battery you have to find out before flashing), it will start flashing, do not make any mistake of removing cable, or else it may hard brick your phone, the download will start if there are no other issues, and total flashing time would be 6 or 10 minutes.
If the flashing went all ok, with no problems then it will show Download Ok.(message Box)
8. Now finally after flashing is 100% done and see download ok, disconnect the phone from the usb cable and remove and re-insert the battery, and power it on, Happy Flashing  :angel:
Guide By Naineesh Rathod
www.facebook.com/naineeshvrathod
XDA Name - Naineesh​Please hit thanks if it helped

I m facing bootloop on s660 maine nav.bar build prop ki tweak se build.prop main edit karke nav.bar enble kia tha then now voh muje nikal na tha to maine build.prop main jo line edit ki thi voh maine vaha se delet kar di then reboot kia fir bhi nav.bar nikla nahi isliye maine frnds se pucha usne bol build.prop hain tere pass uka backup maine bola ha hain to us ne bola es file expl se usko vaha pe laga to maine copy past kia the 3 ops maine overwirte pe click kia then after phone reboot kia to now bootloop ho raha hain plz help me out

Your device is corrupt. It can't be trusted and may not work properly

Hello guys,
Can somebody help me? I have a problem with my LG k10 M250.
When I turn on the device, the message appears: "Your device is corrupt. It can't be trusted and may not work properly".
I would like to reinstall the rom stock, but I can't enter the download mode because the phone always restarts. In other words, my device is always in bootloop.
I have downloaded the following files/tools for installation:
1. M250ds10a_03_VIV_BR_DS_OP_0227.kdz
2. LGUnitedMobileDriver_Ver_3.11.3.exe
3. UPPERCUT_1.0.0.0.zip
Is there a way to fix it? Could a test point be an option?
Thanks!

Olá. Estou com o mesmo problema. Conseguiu resolver?

same problem, fml
3K views and no answers
hehe u know what this means ))))

Samsung A30s/SM-A307FN TWRP and ROOT

Hi guys this is how to make twrp for Samsung a30s and root it.
this method is working with all versions from android 9 to 11 tested
i didn't test it on sm-a307gn / u / f
but i think it will work
first you need to unlock your bootloader
( that will wipe your device so be sure to backup of your data )
WARRNING YOUR WARRNTY WILL BE VOID
Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Enable OEM unlock and USB debugging options ( Settings -> Developer options )
Download and Install Samsung Mobile Phone Drivers ( ignore this if you have installed it ) Drivers Download
Enter Download Mode ( Connected USB Cable to PC, Turn Power off the phone, Press and hold Volume Down + Volume Up keys together then while pressing these keys connecting the phone to PC with USB Cable Data, release all keys when Download Mode appears ).
In Download Mode you see the long press Vol Up option to enter Device Unlock Mode. Unlock the bootloader ( that will wipe your device so be sure to backup of your data )
After Bootloader unlock, the phone will reboot and make sure the phone connected to the internet
now repeat (1) and go to devolper options you will found that OEM unlock is checked with gray and you cannot change it
now your bootloader will be unlocked successfully .
( if you want to lock the bootloader again do the same instrecouns )
now download odin from here
before flashing check odin options and uncheck the Auto Reboot
reboot your device into download mode again and flash this TWRP Like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
after flash is done now hold the volum down and power for a 7 sec when the screan go black realese the voulm down and press volum up with power button for 3 sec after this reales the power and still pressing on voulm up until the device boot into twrp
now be carfull with me first go to wipe and press on format data and type yes
now go home and press on mount
and connect usb to you PC and download this files ROOT Files after extracting the files copy them to the Internal Storage
now first flash multidisabler-samsung-3.1.zip
then flash Magisk-v23.0.zip
then reboot to your system
you will need to setup you device offline then after finishing setting the device connect to internet and open Magisk it will download and install then open the app it will show you to complete the instalition by reboot agree then your phone will reboot
now your device is rooted succefully
password for all files : B0gy09
pleas support me it's my first post and i post about this becouse it was so hard to found this files and make this device rooted succefully and if there any bugs pleas contact me
Whatsapp : +201151025596
Telegram : +201151025596
Facebook : bogy09
Instagram : mostafaasalemm

@mostafasalem423 THREAD CLOSED.
Please advise the moderators team (best via the report function) to re-open your thread when ready to provide links to a different filehost.
Regards
Oswald Boelcke
Senior Moderator

mostafasalem423 said:
Hi guys this is how to make twrp for Samsung a30s and root it.
this method is working with all versions from android 9 to 11 tested
i didn't test it on sm-a307gn / u / f
but i think it will work
first you need to unlock your bootloader
( that will wipe your device so be sure to backup of your data )
WARRNING YOUR WARRNTY WILL BE VOID
Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Enable OEM unlock and USB debugging options ( Settings -> Developer options )
Download and Install Samsung Mobile Phone Drivers ( ignore this if you have installed it ) Drivers Download
Enter Download Mode ( Connected USB Cable to PC, Turn Power off the phone, Press and hold Volume Down + Volume Up keys together then while pressing these keys connecting the phone to PC with USB Cable Data, release all keys when Download Mode appears ).
In Download Mode you see the long press Vol Up option to enter Device Unlock Mode. Unlock the bootloader ( that will wipe your device so be sure to backup of your data )
After Bootloader unlock, the phone will reboot and make sure the phone connected to the internet
now repeat (1) and go to devolper options you will found that OEM unlock is checked with gray and you cannot change it
now your bootloader will be unlocked successfully .
( if you want to lock the bootloader again do the same instrecouns )
now download odin from here
before flashing check odin options and uncheck the Auto Reboot
reboot your device into download mode again and flash this TWRP Like this
View attachment 5359197
after flash is done now hold the volum down and power for a 7 sec when the screan go black realese the voulm down and press volum up with power button for 3 sec after this reales the power and still pressing on voulm up until the device boot into twrp
now be carfull with me first go to wipe and press on format data and type yes
View attachment 5359199View attachment 5359201
now go home and press on mount
View attachment 5359203
and connect usb to you PC and download this files ROOT Files after extracting the files copy them to the Internal Storage
now first flash multidisabler-samsung-3.1.zip
then flash Magisk-v23.0.zip
then reboot to your system
you will need to setup you device offline then after finishing setting the device connect to internet and open Magisk it will download and install then open the app it will show you to complete the instalition by reboot agree then your phone will reboot
now your device is rooted succefully
password for all files : B0gy09
pleas support me it's my first post and i post about this becouse it was so hard to found this files and make this device rooted succefully and if there any bugs pleas contact me
Whatsapp : +201151025596
Telegram : +201151025596
Facebook : bogy09
Instagram : mostafaasalemm
Click to expand...
Click to collapse
Hi I had SM 307GN/DS Samsung with Android 11, I'll try it. Thank you brother.
mostafasalem423 said:
Hi guys this is how to make twrp for Samsung a30s and root it.
this method is working with all versions from android 9 to 11 tested
i didn't test it on sm-a307gn / u / f
but i think it will work
first you need to unlock your bootloader
( that will wipe your device so be sure to backup of your data )
WARRNING YOUR WARRNTY WILL BE VOID
Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Enable OEM unlock and USB debugging options ( Settings -> Developer options )
Download and Install Samsung Mobile Phone Drivers ( ignore this if you have installed it ) Drivers Download
Enter Download Mode ( Connected USB Cable to PC, Turn Power off the phone, Press and hold Volume Down + Volume Up keys together then while pressing these keys connecting the phone to PC with USB Cable Data, release all keys when Download Mode appears ).
In Download Mode you see the long press Vol Up option to enter Device Unlock Mode. Unlock the bootloader ( that will wipe your device so be sure to backup of your data )
After Bootloader unlock, the phone will reboot and make sure the phone connected to the internet
now repeat (1) and go to devolper options you will found that OEM unlock is checked with gray and you cannot change it
now your bootloader will be unlocked successfully .
( if you want to lock the bootloader again do the same instrecouns )
now download odin from here
before flashing check odin options and uncheck the Auto Reboot
reboot your device into download mode again and flash this TWRP Like this
View attachment 5359197
after flash is done now hold the volum down and power for a 7 sec when the screan go black realese the voulm down and press volum up with power button for 3 sec after this reales the power and still pressing on voulm up until the device boot into twrp
now be carfull with me first go to wipe and press on format data and type yes
View attachment 5359199View attachment 5359201
now go home and press on mount
View attachment 5359203
and connect usb to you PC and download this files ROOT Files after extracting the files copy them to the Internal Storage
now first flash multidisabler-samsung-3.1.zip
then flash Magisk-v23.0.zip
then reboot to your system
you will need to setup you device offline then after finishing setting the device connect to internet and open Magisk it will download and install then open the app it will show you to complete the instalition by reboot agree then your phone will reboot
now your device is rooted succefully
password for all files : B0gy09
pleas support me it's my first post and i post about this becouse it was so hard to found this files and make this device rooted succefully and if there any bugs pleas contact me
Whatsapp : +201151025596
Telegram : +201151025596
Facebook : bogy09
Instagram : mostafaasalemm
Click to expand...
Click to collapse

Is it require the Magisk Manager first to installed??

realizar todos los pasos en mi a30s 307g y el root es un éxito, pero tengo un problema con la sim car, la señal solo me dura unos segundos y se va y luego regresa asi todo el tiempo, no puedo hacer llamadas porque se me cortan , todo lo demás funciona bien
Traducido por GT: Hice todos los pasos en mi a30s 307g y la raíz es exitosa, pero tengo un problema con el sim car, la señal solo dura unos segundos y desaparece y luego vuelve así todo el tiempo. , No puedo hacer llamadas porque se me cortan, todo lo demás funciona bien

TWRP link Didn't WORK,,pls fix it

works great! Thanks

Omor_Faruk said:
TWRP link Didn't WORK,,pls fix it
Click to expand...
Click to collapse
It's working man

[email protected] said:
Is it require the Magisk Manager first to installed??
Click to expand...
Click to collapse
No not require any thing on your phone

[email protected] said:
Hi I had SM 307GN/DS Samsung with Android 11, I'll try it. Thank you brother.
Click to expand...
Click to collapse
Did it work for you ?

Terrorduanra420 said:
works great! Thanks
Click to expand...
Click to collapse
I have a307fn btw

I have have a A307FN, and ive run into an issue after installing TWRP. Everything went fine during install, but after booting the phone I noticed the phone was constantly losing cell signal and mobile data connection. I had to revert back to stock as I was unable to resolve the issue. Has anyone came across this problem, or was it something i did wrong?

Works perfectly! Thanks for the detailed instructions!

Terrandroid said:
I have have a A307FN, and ive run into an issue after installing TWRP. Everything went fine during install, but after booting the phone I noticed the phone was constantly losing cell signal and mobile data connection. I had to revert back to stock as I was unable to resolve the issue. Has anyone came across this problem, or was it something i did wrong?
Click to expand...
Click to collapse
Contact me on messenger i will help you

Terrandroid said:
I have have a A307FN, and ive run into an issue after installing TWRP. Everything went fine during install, but after booting the phone I noticed the phone was constantly losing cell signal and mobile data connection. I had to revert back to stock as I was unable to resolve the issue. Has anyone came across this problem, or was it something i did wrong?
Click to expand...
Click to collapse
Same problem here

You have to make sure that you activate usb dumping and oem unlock

Root

Hello
My phone is Samsung A30S SAM-A307fn
I rooted the phone exactly according to the steps.
But the problem is that the SIM cards are disconnected and connected every 2 minutes.

danteaurus said:
realizar todos os passos em mi a30s 307g y el root es un éxito, pero tengo un problem con la sim car, la señal solo me dura unos segundos y se va y luego regresa asi todo el tiempo, no puedo hacer llamadas porque se me cortan , todo lo demás funciona bem
Traducido por GT: Hice todos los los pasos en mi a30s 307g y la raíz es exitosa, pero tengo un problema con el sim car, la señal solo dura unos segundos e desaparece y luego vuelve así todo el tiempo. , No puedo hacer llamadas porque se me cortan, todo lo demás funciona bien
Click to expand...
Click to collapse
Estou com o mesmo problema, você conseguiu resolver?
Mod translation via GT: I have the same problem, did you manage to solve it?

Bro tell me that No Need to Flash any AP file ? Means Flash Firmware no need ?

Question ramdump slpi issue

hi guys , recently i got
the problem with my f3
My phone's memory is automatically filled with a file called ramdump slpi and no matter what I do, I can't get rid of it ,it filed almost 58GB of my space and worst thing is my miui crach! my fingerprint works after 10 seconds my camera freeze . i tried every possible solutions which i found in youtube , google ... i flashed new rom with miflash with clean install i installed twrp and wiped every single things which i could , you just name it .. i heard xda is most professional web site for cellphones so i decided to write here then maybe find some solution , I'll be so greatfull if someone help me on this ?

from what short reserch I did I would install a asop rom

tonibermg said:
hi guys , recently i got
the problem with my f3
My phone's memory is automatically filled with a file called ramdump slpi and no matter what I do, I can't get rid of it ,it filed almost 58GB of my space and worst thing is my miui crach! my fingerprint works after 10 seconds my camera freeze . i tried every possible solutions which i found in youtube , google ... i flashed new rom with miflash with clean install i installed twrp and wiped every single things which i could , you just name it .. i heard xda is most professional web site for cellphones so i decided to write here then maybe find some solution , I'll be so greatfull if someone help me on this ?
Click to expand...
Click to collapse
Did you try clean install via mifalsh before messing with twrp?
Select an older ROM , mifalsh it and use it like that for a while with no modifications - root , twrp , anything.
What are you deleting ? ( There shouldn't be anything you need to delete after clean flash )
If you still have ramdump issues idk... Changing to AOSP might not necessarily solve the underlying problem that's causing this
( If it's hardware , then possibly cpu / ram chip solder balls are failing )
( If it's not hardware then I'd pay one of those guys on telegram and ask for a deep flash - sahara protocol flashing, idk what they call it )

Rstment ^m^ said:
Did you try clean install via mifalsh before messing with twrp?
Select an older ROM , mifalsh it and use it like that for a while with no modifications - root , twrp , anything.
What are you deleting ? ( There shouldn't be anything you need to delete after clean flash )
If you still have ramdump issues idk... Changing to AOSP might not necessarily solve the underlying problem that's causing this
( If it's hardware , then possibly cpu / ram chip solder balls are failing )
( If it's not hardware then I'd pay one of those guys on telegram and ask for a deep flash - sahara protocol flashing, idk what they call it )
Click to expand...
Click to collapse
Thank you for your reply , i am not sure but i think i didn't clean install with mi flash before messed up with twrp . Actually everythings is possible , i have done many formatting and wipe in twrp and orangfox , then i realized what happened , i tried to wipe deeply by twrp and orange fox . But While i tried to wipe in orange fox i got this error which " mounting is not possible or we are able to mount or there is nothing to mount " this was biggest error i got .yes I tried to install pixel experience and miui cxs rom . i thought by myself maybe it's be the hardware issue too . oh one question my poco f3 is 128 GB and when i wiped everythings by twrp and orange fox all the free space i got is something about 108GB , is that normal ? I dont know maybe i wiped something i shouldn't , so as i understand which u said miflash supposed to cleaning everthings even if i messed up in twrp or orange fox ? By the way in twrp my both slot A and B is ok . If u see the photos every file in ramdump is same size 29mb and every 20 seconds one file shows up there . I thought by myself maybe it's connected to encryption or decryption stuff , just silly idea i guess .
and thank you so much for your kindness which u want to pay for deep flash , i appreciate man but it's not necessary . I would pay myself

that ramdump file filled 75GB of my storge and i got this error now .

tonibermg said:
that ramdump file filled 75GB of my storge and i got this error now .
Click to expand...
Click to collapse
don't use twrp , miflash with clean all option and leave it like that

did the solution above work? I also have this problem now

A mi me paso al intalar el miui14 en mi poco f3 todo iba bien ,muy rapido y pesa poco pero al instalar telegram se me puso loco a consumir espacio borrando arvhivos crush todo el dia ya llega a un punto que solo queda volver a flashear,dos veces me paso y siempre con el telegram ,lo solucione volviendo otra vez al miui 13 y ahora con lelegram intalado no tengo consumo ninguno