Related
LG G Pad 10.1
LG V700
Kernal: 3.4.0+
Build: LRX22G
Software: V70020c
Android Version: 5.0.2
I guess I will ask here -- seems like this device has zero support, even from LG.
Need the 4.4.x KitKat KDZ if possible -- for this tablet. If someone will share it I will host it. There seem to be NO LINKS ANYWHERE THAT WORK. I have the KDZ for the software that was on the tablet, but I was trying to downgrade and ended up in QHSUSB_BULK mode and using the SRKTool2.1 & LGFirmwareExtractor I think I can fix it, but I would love to go right to 4.4x KitKAt instead of back to Lollipop...
I have the same issue. I can't find any help on it and LG still hasn't responded to my warranty claim yet (of course I gave them a different reason for it not working). If you know a way to go back to Lollipop please share. Trying to get this thing back to any sort of working condition.
Just an update. I sent in for repair (covered by warranty) and they fixed it no problem. It's even the same tablet. I just made sure to play dumb and not say anything about rooting or anything when I called in. Took about 2 weeks from shipping it to getting it back. I'm just going to stick with rooting this time and not try install xposed or install a new recovery.
mixelpixx said:
LG G Pad 10.1
LG V700
Kernal: 3.4.0+
Build: LRX22G
Software: V70020c
Android Version: 5.0.2
I guess I will ask here -- seems like this device has zero support, even from LG.
Need the 4.4.x KitKat KDZ if possible -- for this tablet. If someone will share it I will host it. There seem to be NO LINKS ANYWHERE THAT WORK. I have the KDZ for the software that was on the tablet, but I was trying to downgrade and ended up in QHSUSB_BULK mode and using the SRKTool2.1 & LGFirmwareExtractor I think I can fix it, but I would love to go right to 4.4x KitKAt instead of back to Lollipop...
Click to expand...
Click to collapse
any luck? I still can't find a KitKat kdz.
Yo tengo la ROM v70010c.kdz
Buenos días buscando en internet conseguí la ROM v70010c y la v70020a tengo el mismo problema con mi tablet primero era qhsusb_bulk y después de instalar los controladores de qualcomm pase a qdloader 9008 pero ya de ahí no he podido pasar la v70010c si mal no recuerdo es la 4.4.2 No recuerdo de donde la baje porque pasé todo un día buscando y fueron muchas páginas visitadas pero si te sirve para probar dime a dónde la subo y como para compartirla con todo el mundo y si logras solucionar el problema espero puedas ayudarme tambien.
icebergz12 said:
any luck? I still can't find a KitKat kdz.
Click to expand...
Click to collapse
You can find it here -> http://forum.xda-developers.com/showpost.php?p=68012665&postcount=6
Hi*
V700 USER PLEASE READ !!!!!!
We need an loader image from an working v700 Gpad 10.1 to unbrick" (required:*Root*+ Terminal emulator*App)
in terminal type :
su
(grant*Root)
dd if=/dev/block/mmcblk0 of=/sdcard/loader.img bs=1024 count=168960
Thx in Advance**!!!!
Situación similar.
Hola
Mi Jefe compró en China una Lg GPad 10.1 y no funcionaba con el SIM de acá (Costa Rica). Antes había cambiado el software de algunos teléfonos y lo intenté con este. Lo logré bien con FlashTools, pero el firmware era el mismo original, conseguí otro (KDZ) pero al parecer no era para ese aparato. Ahora no entra en ninguno de los modos especiales, tampoco parece cargar y aparece como QHSUSB_BULK. ¿Puedes ayudarme?
luisjo05 said:
Buenos días buscando en internet conseguí la ROM v70010c y la v70020a tengo el mismo problema con mi tablet primero era qhsusb_bulk y después de instalar los controladores de qualcomm pase a qdloader 9008 pero ya de ahí no he podido pasar la v70010c si mal no recuerdo es la 4.4.2 No recuerdo de donde la baje porque pasé todo un día buscando y fueron muchas páginas visitadas pero si te sirve para probar dime a dónde la subo y como para compartirla con todo el mundo y si logras solucionar el problema espero puedas ayudarme tambien.
Click to expand...
Click to collapse
Hello friends, I've been looking for the forum for several days and I can not find the right room for my device.
Update for MCU if I find it. (KYD-V2.83)
Room I found for KLG / KLD / SG / RM / JY / MD system but for my KYD system I did not find anything.
I do not risk putting another and I break my own.
Can you help me please?
The data of my team are:
Model number:
S07
S / N:
000D18A153AD
MCU version:
MTCB-KYD-V2.83
Nov 26 2015 18:50:54
Android Version:
4.4.4_21122015
Kernel Version:
3.0.36+
Root @ chun # 2837
Mon Dec 21 10:23:34 2015
Number of compilations:
Rk-3066-eng4.4.4 21122015. 17:55
CPU:
ARM Cortex-A9 @ 1.6GHz (x2)
Memory:
1024 MB
I'm getting a little crazy looking, I need help .....
Hola amigos, llevo varios dias buscando por el foro y no encuentro la Room adecuada para mi dispositivo.
Actualizacion para MCU si que la encontre. (KYD-V2.83)
Room encontre para sistema KLG/KLD/SG/RM/JY/MD pero para mi sistema KYD no encontre nada.
No me arriesgo a poner otra y se me rompa la mia.
¿Me podeis ayudar por favor?
Los datos de mi equipo son:
Model number:
S07
S / N:
000D18A153AD
MCU version:
MTCB-KYD-V2.83
Nov 26 2015 18:50:54
Android Version:
4.4.4_21122015
Kernel Version:
3.0.36+
Root @ chun # 2837
Mon Dec 21 10:23:34 2015
Number of compilations:
Rk-3066-eng4.4.4 21122015. 17:55
CPU:
ARM Cortex-A9 @ 1.6GHz (x2)
Memory:
1024 MB
Me estoy volviendo un poco loco buscando, necesito ayuda.....
You see the "MTCB" bit before your MCU number ? - it means you have an MTCB unit, you are in the "MTCB" forums, so you are in the correct place.
The manufacturer of your unit is not important because all versions from all 10+ manufacturers are virtually identical, please read the wiki in my signature for more info.
MCUs are here :
https://forum.xda-developers.com/showthread.php?t=3246386
You already have the latest for your unit.
typos1 said:
You see the "MTCB" bit before your MCU number ? - it means you have an MTCB unit, you are in the "MTCB" forums, so you are in the correct place.
The manufacturer of your unit is not important because all versions from all 10+ manufacturers are virtually identical, please read the wiki in my signature for more info.
MCUs are here :
https://forum.xda-developers.com/showthread.php?t=3246386
You already have the latest for your unit.
Click to expand...
Click to collapse
Thank you very much for your answer.
The MCU got it OK
My question is the following:
If I put a room "manufactured" android 4.4.4, if I do not like I can switch to Android from Witson factory?
Does any Room 4.4.4 made for my model?
Sorry for not explaining well, the translation is painful for me.
Thanks for the help.
Muchas gracias por tu respuesta.
El MCU lo tengo OK
Mi duda es la siguiente:
¿Si pongo una Room "fabricada" de android 4.4.4, si no me gusta puedo cambiar a Android de fabrica Witson?
¿Sirve cualquier Room 4.4.4 fabricada para mi modelo?
Perdon por no explicarme bien, la traduccion es penosa por mi parte.
Gracias por la ayuda.
pacoanaykiko said:
Thank you very much for your answer.
The MCU got it OK
My question is the following:
If I put a room "manufactured" android 4.4.4, if I do not like I can switch to Android from Witson factory?
Does any Room 4.4.4 made for my model?
Sorry for not explaining well, the translation is painful for me.
Thanks for the help.
Muchas gracias por tu respuesta.
El MCU lo tengo OK
Mi duda es la siguiente:
¿Si pongo una Room "fabricada" de android 4.4.4, si no me gusta puedo cambiar a Android de fabrica Witson?
¿Sirve cualquier Room 4.4.4 fabricada para mi modelo?
Perdon por no explicarme bien, la traduccion es penosa por mi parte.
Gracias por la ayuda.
Click to expand...
Click to collapse
You can use any MTCB or MTCC ROM that matches your processor type and screen resolution.
typos1 said:
You can use any MTCB or MTCC ROM that matches your processor type and screen resolution.
Click to expand...
Click to collapse
Well ... with that I think I'm going to be brave and I'll try.
Thanks for the help, if I have doubts I ask again. If I do well, I'll tell you how it goes.
Thanks again.
Bueno....con eso creo que me voy a ser valiente y lo voy a intentar.
Gracias por la ayuda, si tengo dudas vuelvo a preguntar. Si me sale bien os cuento como me va.
Gracias de nuevo.
De momento todo salio bien, me lio un poco con las aplicaciones, pero va bien.
Facil la instalacion y bastante rapida.
Se relentiza un poco con el uso de programas con gps.
rom for KYD
I have the rom for KYD head unit, engineer rom, which the KYD engineer sent to me after I phoned them up.
XDA not allow me to send the link unless i have post or repied over 10 thread.
if you cant wait, you can leave your email to me, i will send you the download link.
Hi everyone,
I have a big problem since yesterday, I am under the version Miui 11 Android 10 rooted under TWRP unofficial and I wanted to install a Rom Custom, I of which wanted to install the official version of TWRP, when I have Flash Recovery Recovery.img after restarting... BLACK SCREEN I could not have returned to FASTBOOT mode and in RECOVERY only the NOTIFICATION which is on, when I stay press POWER + VOLUM UP I have a SOUND on PC like what the PHONE is connected for 5 SECONDS after it DISCONNECTS, so I followed a tutorial to open my phone and disconnect my BATTERY... always the same problem :/
if you can help me please :/
I would like to specify that I never know that when I wanted to put the official version of TWRP my phone was around 30% ... ?
Thanks you.
Test Point
Tiix31Dev said:
Hi everyone,
I have a big problem since yesterday, I am under the version Miui 11 Android 10 rooted under TWRP unofficial and I wanted to install a Rom Custom, I of which wanted to install the official version of TWRP, when I have Flash Recovery Recovery.img after restarting... BLACK SCREEN I could not have returned to FASTBOOT mode and in RECOVERY only the NOTIFICATION which is on, when I stay press POWER + VOLUM UP I have a SOUND on PC like what the PHONE is connected for 5 SECONDS after it DISCONNECTS, so I followed a tutorial to open my phone and disconnect my BATTERY... always the same problem :/
if you can help me please :/
I would like to specify that I never know that when I wanted to put the official version of TWRP my phone was around 30% ... ?
Thanks you.
Click to expand...
Click to collapse
I am writing this for anyone to use at their own risk, it is not complicated.
Once updated from Indonesia Miui 11 Android 9 rom to Android 10 and installed a recovery incorrectly and I have returned to
lock my Redmi Note 8 Pro (Begoña) and this time I have not waited for the battery to drain as in the previous one (post # 196)
I have used the Test Point method.
This is what I have done:
-Copied the folder from the Indonesian rom V10.4.2.0, once the zip is unzipped, in Computer> C
-Installed SP Flash Tool v5. 1924 Win also in C
-Removed the back of the mobile and removed the housing that is above the battery (Photo 1).
-Prepared a piece of fine copper wire, I have connected one end to a screw on the mobile plate making ground (Photo 2) and to
the other end I have connected a nail (Photo 4) .Then I have opened the Flash Tool and I have put the scatter that
*it is in the "images" folder of the rom that I had copied in C, and the DA and the authentication file that is in it
*Flash Tool folder and I have connected the usb cable to the mobile, only to the mobile.
-I pressed "Download Only" and connected the other end of the copper cable, prepared with a nail, in the
*point Kcol0 (Photo 3) and I have connected the usb cable to the computer. The bottom bar of the FlashTool has started to fill in
*color red first and then change color until the "Download Ok" symbol appears
*I have done it with the battery disconnected (others say it is connected) and with all the files marked on the
*Flash Tool (others say that you only have to mark the preolader) and it has worked for me.
*
After a few minutes the mobile has started with MIUI 10 and Android 9, as expected by the rom with which I have done it and
then I have already installed MIUI 11 and then I have updated to Android 10, both with MiFlash20191206 of Xiaomi. To finish
installing the appropriate recovery, this time yes, and doing root
If you have disconnected the battery, open the phone as in photo 1 of the three that I attach.
Esto lo escribo para que lo use quien quiera siempre bajo su propia responsabilidad, no es complicado.
Una vez actualizado de rom Indonesia Miui 11 Android 9 a Android 10 e instalado un recovery de forma incorrecta y he vuelto a
bloquear mi Redmi Note 8 Pro (Begoña) y esta vez no he esperado a que se agote la batería como en la anterior (post #196)
sino que he usado el método del Test Point.
Esto es lo he hecho:
-Copiado la carpeta de la rom de Indonesia V10.4.2.0, una vez descomprimido el zip, en Equipo > C
-Instalado SP Flash Tool v5. 1924 Win también en C
-Desmontado la trasera del móvil y quitado la carcasa que hay por arriba de la batería (Foto 1).
-Preparado un trozo de cable fino de cobre, un estremo lo he conectado a un tornillo en la placa del móvil haciendo masa(Foto 2)
y al otro extremo le he conectado un clavo (Foto 4).luego he abierto el Flash Tool y he puesto el scatter que
hay en la carpeta "images" de la rom que que había copiado en C, y el DA y archivo de autentificación que hay en la propia
carpeta del Flash Tool y he conectado el cable usb al móvil, solo al móvil.
-He pulsado "Download Only" y he conectado el otro extremo del cable de cobre, preparado con un clavo, en el
punto Kcol0 (Foto 3) y he conectado el cable usb al ordenador. La barra de abajo del FlashTool ha empezado a rellenarse en
color rojo primero y luego cambia de color hasta que aparece el simbolo "Download Ok"
Lo he hecho con la batería desconectada (otros dicen que conectada) y con todo los archivos marcados en el
Flash Tool (otros dicen que sólo hay que marcar el preolader) y me ha funcionado.
Después de unos minutos se ha iniciado el móvil con MIUI 10 y Android 9, como era de esperar por la rom con la que lo he hecho y luego ya le he instalado
MIUI 11 y después he actualizado a Android 10, los dos con MiFlash20191206 de Xiaomi. Para terminar instalando el recovery
apropiado, esta vez sí, y haciendo root
javizeta said:
If you have disconnected the battery, open the phone as in photo 1 of the three that I attach.
The first time it crashed I revived it waiting for the battery to drain (post # 196) and now I have it back
to briquet when flashing wrong twrp and I have not waited for it to be exhausted again but I have done it
with a test point.
In photos two and three I show you where you have to connect the cable and privately I send you a link to an explanatory video
because I don't know if I can put links to youtube here.
It worked perfectly for me on the first try.
Click to expand...
Click to collapse
hey how to do me a favor pass the tutorial because I have the same problem:fingers-crossed:
maikiller said:
hey how to do me a favor pass the tutorial because I have the same problem:fingers-crossed:
Click to expand...
Click to collapse
I used the google search engine: tutorial to unbrick Chinese MTK phone and in the results I chose the Azlan Laion video.
Utilicé el buscador de google: tutorial desbrickear telefono MTK chino y en los resultados elegí el video de Azlan Laion.
Updated post # 2
Read please
Actualizado post #2
Leer, por favor
I definitely would appreciate anything that would get this flash to go through... I already have mine apart and have been trying everything to get it unbricked with no success as of yet...
Sent from my Redmi Note 8 Pro using XDA-Developers Legacy app
javizeta said:
I am writing this for anyone to use at their own risk, it is not complicated.
Once updated from Indonesia Miui 11 Android 9 rom to Android 10 and installed a recovery incorrectly and I have returned to
lock my Redmi Note 8 Pro (Begoña) and this time I have not waited for the battery to drain as in the previous one (post # 196)
I have used the Test Point method.
This is what I have done:
-Copied the folder from the Indonesian rom V10.4.2.0, once the zip is unzipped, in Computer> C
-Installed SP Flash Tool v5. 1924 Win also in C
-Removed the back of the mobile and removed the housing that is above the battery (Photo 1).
-Prepared a piece of fine copper wire, I have connected one end to a screw on the mobile plate making ground (Photo 2) and to
the other end I have connected a nail (Photo 4) .Then I have opened the Flash Tool and I have put the scatter that
*it is in the "images" folder of the rom that I had copied in C, and the DA and the authentication file that is in it
*Flash Tool folder and I have connected the usb cable to the mobile, only to the mobile.
-I pressed "Download Only" and connected the other end of the copper cable, prepared with a nail, in the
*point Kcol0 (Photo 3) and I have connected the usb cable to the computer. The bottom bar of the FlashTool has started to fill in
*color red first and then change color until the "Download Ok" symbol appears
*I have done it with the battery disconnected (others say it is connected) and with all the files marked on the
*Flash Tool (others say that you only have to mark the preolader) and it has worked for me.
*
After a few minutes the mobile has started with MIUI 10 and Android 9, as expected by the rom with which I have done it and
then I have already installed MIUI 11 and then I have updated to Android 10, both with MiFlash20191206 of Xiaomi. To finish
installing the appropriate recovery, this time yes, and doing root
If you have disconnected the battery, open the phone as in photo 1 of the three that I attach.
Esto lo escribo para que lo use quien quiera siempre bajo su propia responsabilidad, no es complicado.
Una vez actualizado de rom Indonesia Miui 11 Android 9 a Android 10 e instalado un recovery de forma incorrecta y he vuelto a
bloquear mi Redmi Note 8 Pro (Begoña) y esta vez no he esperado a que se agote la batería como en la anterior (post #196)
sino que he usado el método del Test Point.
Esto es lo he hecho:
-Copiado la carpeta de la rom de Indonesia V10.4.2.0, una vez descomprimido el zip, en Equipo > C
-Instalado SP Flash Tool v5. 1924 Win también en C
-Desmontado la trasera del móvil y quitado la carcasa que hay por arriba de la batería (Foto 1).
-Preparado un trozo de cable fino de cobre, un estremo lo he conectado a un tornillo en la placa del móvil haciendo masa(Foto 2)
y al otro extremo le he conectado un clavo (Foto 4).luego he abierto el Flash Tool y he puesto el scatter que
hay en la carpeta "images" de la rom que que había copiado en C, y el DA y archivo de autentificación que hay en la propia
carpeta del Flash Tool y he conectado el cable usb al móvil, solo al móvil.
-He pulsado "Download Only" y he conectado el otro extremo del cable de cobre, preparado con un clavo, en el
punto Kcol0 (Foto 3) y he conectado el cable usb al ordenador. La barra de abajo del FlashTool ha empezado a rellenarse en
color rojo primero y luego cambia de color hasta que aparece el simbolo "Download Ok"
Lo he hecho con la batería desconectada (otros dicen que conectada) y con todo los archivos marcados en el
Flash Tool (otros dicen que sólo hay que marcar el preolader) y me ha funcionado.
Después de unos minutos se ha iniciado el móvil con MIUI 10 y Android 9, como era de esperar por la rom con la que lo he hecho y luego ya le he instalado
MIUI 11 y después he actualizado a Android 10, los dos con MiFlash20191206 de Xiaomi. Para terminar instalando el recovery
apropiado, esta vez sí, y haciendo root
Click to expand...
Click to collapse
----------
Your method does not work because it depends on the motherboard you are using, for example the Mediatek uses another type of test point and they are blocked, I think that is why Xiaomi does not want to give more support to the Xiaomi Redmi Note 8 Pro (Begonia) as devices!
I have tried it several times and it does not work, the only thing is a working method is: Having the volume up pressed until the Mode Flash mode is activated and with the SP Flash Tool. The problem is that it asks for an Authorized Account and it is what I am looking for (of course to payment)
The Procedure
0. Unzip your device's firmware.
1. Install MiFlashPro.
2. Navigate to (installation_directory)/MiFlashPro/SP_Flash_Tool/mi and run "account_auth.exe" (Run as administrator). In the window that opens, log in with an authorized Xiaomi Account.
3. Navigate to (installation_directory)/MiFlashPro/SP_Flash_Tool nad run "flash_tool.exe". The SP_Flash_Tool interface opens. Now you have to select the 3 files:
Download-Agent: (installation_directory)/MiFlashPro/SP_Flash_Tool/MTK_AllInOne_DA_mt6765_mt6785.bin
Scatter-loading File: You will find this one on your stock rom folder, especially on the folder called "images".
Authentication File: (installation_directory)/MiFlashPro/SP_Flash_Tool/auth_sv5.auth
4. Press the "Download" button.
5. Connect the USB cable to your PC but NOT YET to your phone.
6. Hold the vol+ button on your phone pressed and NOW connect the cable to it.
7. The program should now react and start the flashing process without giving an error.
8. Wait for the flashing process to end and enjoy!
javizeta said:
I am writing this for anyone to use at their own risk, it is not complicated.
Once updated from Indonesia Miui 11 Android 9 rom to Android 10 and installed a recovery incorrectly and I have returned to
lock my Redmi Note 8 Pro (Begoña) and this time I have not waited for the battery to drain as in the previous one (post # 196)
I have used the Test Point method.
This is what I have done:
-Copied the folder from the Indonesian rom V10.4.2.0, once the zip is unzipped, in Computer> C
-Installed SP Flash Tool v5. 1924 Win also in C
-Removed the back of the mobile and removed the housing that is above the battery (Photo 1).
-Prepared a piece of fine copper wire, I have connected one end to a screw on the mobile plate making ground (Photo 2) and to
the other end I have connected a nail (Photo 4) .Then I have opened the Flash Tool and I have put the scatter that
*it is in the "images" folder of the rom that I had copied in C, and the DA and the authentication file that is in it
*Flash Tool folder and I have connected the usb cable to the mobile, only to the mobile.
-I pressed "Download Only" and connected the other end of the copper cable, prepared with a nail, in the
*point Kcol0 (Photo 3) and I have connected the usb cable to the computer. The bottom bar of the FlashTool has started to fill in
*color red first and then change color until the "Download Ok" symbol appears
*I have done it with the battery disconnected (others say it is connected) and with all the files marked on the
*Flash Tool (others say that you only have to mark the preolader) and it has worked for me.
*
After a few minutes the mobile has started with MIUI 10 and Android 9, as expected by the rom with which I have done it and
then I have already installed MIUI 11 and then I have updated to Android 10, both with MiFlash20191206 of Xiaomi. To finish
installing the appropriate recovery, this time yes, and doing root
If you have disconnected the battery, open the phone as in photo 1 of the three that I attach.
Esto lo escribo para que lo use quien quiera siempre bajo su propia responsabilidad, no es complicado.
Una vez actualizado de rom Indonesia Miui 11 Android 9 a Android 10 e instalado un recovery de forma incorrecta y he vuelto a
bloquear mi Redmi Note 8 Pro (Begoña) y esta vez no he esperado a que se agote la batería como en la anterior (post #196)
sino que he usado el método del Test Point.
Esto es lo he hecho:
-Copiado la carpeta de la rom de Indonesia V10.4.2.0, una vez descomprimido el zip, en Equipo > C
-Instalado SP Flash Tool v5. 1924 Win también en C
-Desmontado la trasera del móvil y quitado la carcasa que hay por arriba de la batería (Foto 1).
-Preparado un trozo de cable fino de cobre, un estremo lo he conectado a un tornillo en la placa del móvil haciendo masa(Foto 2)
y al otro extremo le he conectado un clavo (Foto 4).luego he abierto el Flash Tool y he puesto el scatter que
hay en la carpeta "images" de la rom que que había copiado en C, y el DA y archivo de autentificación que hay en la propia
carpeta del Flash Tool y he conectado el cable usb al móvil, solo al móvil.
-He pulsado "Download Only" y he conectado el otro extremo del cable de cobre, preparado con un clavo, en el
punto Kcol0 (Foto 3) y he conectado el cable usb al ordenador. La barra de abajo del FlashTool ha empezado a rellenarse en
color rojo primero y luego cambia de color hasta que aparece el simbolo "Download Ok"
Lo he hecho con la batería desconectada (otros dicen que conectada) y con todo los archivos marcados en el
Flash Tool (otros dicen que sólo hay que marcar el preolader) y me ha funcionado.
Después de unos minutos se ha iniciado el móvil con MIUI 10 y Android 9, como era de esperar por la rom con la que lo he hecho y luego ya le he instalado
MIUI 11 y después he actualizado a Android 10, los dos con MiFlash20191206 de Xiaomi. Para terminar instalando el recovery
apropiado, esta vez sí, y haciendo root
Click to expand...
Click to collapse
excuse me , could u wirte in english on these pictures , i can not read ur Lang, please,:highfive::highfive: please
gadmei.tw said:
excuse me , could u wirte in english on these pictures , i can not read ur Lang, please,:highfive::highfive: please
Click to expand...
Click to collapse
These are the texts included in the photos translated into English using the google translator
Photo 2: It is to this screw that I have attached one end of the cable
Photo 3: Upper label: To this round contact you have to connect the other end of the cable
Bottom epigraph: It is just above the battery connector. Battery disconnected.
javizeta said:
These are the texts included in the photos translated into English using the google translator
Photo 2: It is to this screw that I have attached one end of the cable
Photo 3: Upper label: To this round contact you have to connect the other end of the cable
Bottom epigraph: It is just above the battery connector. Battery disconnected.
Click to expand...
Click to collapse
thank u!
i will try through these point
need video please/necesito el video por favor
hi budy, how could you send me the video?, i got the same problem with my redmi note 8 pro
Hola amigo, espero que te encuentres bien, ¿Como podrías enviarme el video?, tengo el mismo problema con mi redmi note 8 pro, se apagó y no ha encendido
leandro iván said:
hi budy, how could you send me the video?, i got the same problem with my redmi note 8 pro
Hola amigo, espero que te encuentres bien, ¿Como podrías enviarme el video?, tengo el mismo problema con mi redmi note 8 pro, se apagó y no ha encendido
Click to expand...
Click to collapse
What video are you referring to?
hay rom y twrp para este movil?? , tiene que desbloquearlo xiaomi ?? el problema que tiene es: se rinicia con cualquier web, llamëse de pelis o cadenas de tv, en todas arranca cuando arranca bien. ya despues de un buen rato me dice que que vaya al cine a ver la peli, me lo ha echo hastres veces en la misma, tengo la duda de querer hacer con una piedra muchos moviles del mismo. TIENE ARREGLO???? Gracias...
MOD EDIT: Please post only in English according to the FORUM RULES or at least add an English translation below your foreign language(Google translator for example), translation added below:
is there rom and twrp for this mobile?? , do you have to unlock it xiaomi ?? the problem it has is: it is rinicia with any web, call it movies or TV networks, in all starts when it starts well. and after a good while he tells me to go to the cinema to see the movie, he has cast it to me hastres times in it, I have the doubt of wanting to make with a stone many mobiles of it. IT HAS FIXED???? Thank you...
Two months ago (since October), I updated my Samsung Galaxy A22 4G (SM-A225M) to get the latest update "A225MUBS4BVJ1" (aka. October update with September patch). I had been testing the update, no performance loss and nothing new, to be honest. But when I used mobile data, it disconnected some seconds after enabling the mobile data, and it marked me that I had no SIM card inserted, and no signal. It also only reconnected but was disconnected again, thus repeating itself.
That problem was there even if my phone it's in good condition, even the SD card and SIM slots are in good condition, switched the SIM card to another to check if it was a network problem with SIM Operator (it wasn't), and even tried to reset network settings and nothing.
Even in the next update A225MUBS4BVJ1 (November update with October patch), the developers didn't fix it. But I have discovered a possible fix (and temporal until Samsung launches a new update) and it is to switch 4G network mode to only 3G (even 3G/2G). You will have to deal with the slow speed of the internet but at least you will receive calls, and mobile data and signal won't be disconnected every time.
I have my Galaxy A22 4G rooted but I don't know if this problem also happens to non-root users, I have talked about this problem with Samsung Members and nobody has talked about the same problem. More or less except for Samsung Galaxy A32 4G owners, you can check in the next links and the problems seems to be almost the same.
Mobile data disconnects every 25 seconds
Hello I have a issue on my phone I rooted my phone with magisk a few days ago and now it has a large issue. Every 25 seconds, the mobile data shows a cross with a circle. This issue happens about 10 seconds. Then it returns to normal. And then...
forum.xda-developers.com
loss of signal and mobile data every 10 minutes after opening bootloader
Hello everyone, does anyone else have the problem of signal and data loss every 10 minutes after opening bootloader or rooting? Is there a solution so that the signal and mobile data are not cut anymore I am in one ui 4.1
forum.xda-developers.com
So, I'm sure it is a software bug.
December 6th, 2022, Samsung has released a update for Galaxy A22 4G (SM-A225M) of OneUI 5 update but in Panama, and the few of the bugs has been fixed.
I've installed it to my Galaxy A22 4G (SM-A225) with original Carrier ID "TCE", I installed the Panama (TPA) firmware, as TPA firmware is Multi-CSC, I switched my phone's CSC to "MXO" (aka. Mexico).
Note: the Galaxy A Series have a bug when switching ROMs CSC and the CSC switch to one that you didn't wanted.
The experience feels the same like with Android 11 & Android 12, now only with few features added, more personalization and smooth animations. The Mobile network bug has been fixed but... Now the bug in this first version of One UI 5 for this device is that the UI scale for few apps & system apps is broken.
Un modulo para ponerle 120Hz a SM-A225M PORFA
ArmandoDrake said:
Hace dos meses (desde octubre), actualicé mi Samsung Galaxy A22 4G (SM-A225M) para obtener la última actualización "A225MUBS4BVJ1" (también conocida como actualización de octubre con parche de septiembre). Había estado probando la actualización, sin pérdida de rendimiento y nada nuevo, para ser honesto. Pero cuando usé datos móviles, se desconectó unos segundos después de habilitar los datos móviles, y me marcó que no tenía tarjeta SIM insertada y sin señal. También solo se volvió a conectar, pero se desconectó nuevamente, repitiéndose así.
Ese problema estaba allí incluso si mi teléfono está en buenas condiciones, incluso la tarjeta SD y las ranuras SIM están en buenas condiciones, cambié la tarjeta SIM a otra para verificar si era un problema de red con el operador SIM (no lo era), y Incluso intenté restablecer la configuración de red y nada.
Incluso en la próxima actualización A225MUBS4BVJ1 (actualización de noviembre con parche de octubre), los desarrolladores no lo arreglaron. Pero he descubierto una posible solución (y temporal hasta que Samsung lance una nueva actualización) y es cambiar el modo de red 4G a solo 3G (incluso 3G/2G). Tendrás que lidiar con la baja velocidad de Internet, pero al menos recibirás llamadas y los datos móviles y la señal no se desconectarán siempre.
Tengo rooteado mi Galaxy A22 4G pero no se si este problema le pasa también a usuarios no root, he hablado de este problema con Samsung Members y nadie ha hablado del mismo problema. Más o menos, a excepción de los propietarios de Samsung Galaxy A32 4G, puede consultar los siguientes enlaces y los problemas parecen ser casi los mismos.
Mobile data disconnects every 25 seconds
Hello I have a issue on my phone I rooted my phone with magisk a few days ago and now it has a large issue. Every 25 seconds, the mobile data shows a cross with a circle. This issue happens about 10 seconds. Then it returns to normal. And then...
forum.xda-developers.com
https://forum.xda-developers.com/t/...estoy seguro de que es un error de software.
Click to expand...
Click to collapse
http://Ay algún módulo para SM-A225M PARA PONERLE 120Hz
KALED092## said:
Un modulo para ponerle 120Hz a SM-A225M PORFA
Click to expand...
Click to collapse
Hay módulos pero dicho valor no puede ser cambiado forzosamente ya que la pantalla tiene una tasa de 90Hz y no es compatible 120Hz.