Hope I could get some good advice from the collective. This week my wife and I changed our carrier from ATT to TMOB. I have a Fold 4 and she a Fold 3. Her went perfectly. Mine, not so much.
Both phones were paid off in advance. No balance for either on ATT.
We started out and got the unlock code from the old ATT carrier for both phones.
We got the code to port the existing telephone numbers from the old carrier ATT.
We established out TMOB account.
When we scanned the QR code for TMOB with the fold 4, it asked for the ATT provided unlock code, which it accepted
Fold 4 rebooted
BAD: The Fold 4 booted with the old ATT logo, not the TMOB logo, but it come up with the esim on TMOB.
Good: The fold 3 booted up with the TMOB logon, and it downloaded all the TMOB bloat, and came up with the esim on TMOB
BAD: On the Fold 4, I cannot seem to get 5G service, because the CSC still points to ATT even though in Settings==>Connections it recognized it is on TMOB
So I supidly flashed the TMOB firmware from Sammy, which was the same Oct 1 security release I had on the phone. I used HOME_CSC to prevent data wiping.
When the Fold 4 rebooted, it went into RECOVERY and told me it required a FACTORY RESET. Would not boot up normally. I tried many times
Performed FACTORY RESET. Restored the phone from SAMMY Cloud.
Same issue - still no 5G service still usnign ATT CSC
Called TMOB and they recommended I remove the esim. Mistrake - then I had no service.
Went to TMOB store and they provided a real SIM so I got service back
But still on the ATT CSC
Told me to go back to ATT, but they say it is unlocked?
Any advice how to force the phone to use the TMOB CSC? Phone is NOT rooted. I know if I root it I can force the change. But I don't want to root it.
Thanks in advance.
Flame Red said:
Hope I could get some good advice from the collective. This week my wife and I changed our carrier from ATT to TMOB. I have a Fold 4 and she a Fold 3. Her went perfectly. Mine, not so much.
Both phones were paid off in advance. No balance for either on ATT.
We started out and got the unlock code from the old ATT carrier for both phones.
We got the code to port the existing telephone numbers from the old carrier ATT.
We established out TMOB account.
When we scanned the QR code for TMOB with the fold 4, it asked for the ATT provided unlock code, which it accepted
Fold 4 rebooted
BAD: The Fold 4 booted with the old ATT logo, not the TMOB logo, but it come up with the esim on TMOB.
Good: The fold 3 booted up with the TMOB logon, and it downloaded all the TMOB bloat, and came up with the esim on TMOB
BAD: On the Fold 4, I cannot seem to get 5G service, because the CSC still points to ATT even though in Settings==>Connections it recognized it is on TMOB
So I supidly flashed the TMOB firmware from Sammy, which was the same Oct 1 security release I had on the phone. I used HOME_CSC to prevent data wiping.
When the Fold 4 rebooted, it went into RECOVERY and told me it required a FACTORY RESET. Would not boot up normally. I tried many times
Performed FACTORY RESET. Restored the phone from SAMMY Cloud.
Same issue - still no 5G service still usnign ATT CSC
Called TMOB and they recommended I remove the esim. Mistrake - then I had no service.
Went to TMOB store and they provided a real SIM so I got service back
But still on the ATT CSC
Told me to go back to ATT, but they say it is unlocked?
Any advice how to force the phone to use the TMOB CSC? Phone is NOT rooted. I know if I root it I can force the change. But I don't want to root it.
Thanks in advance.
Click to expand...
Click to collapse
I would use a patched ODIN and fully flash TMB firmware alongside user_data, it would be a fully factory reset but it will be T-Mobile from the very beginning.
xlylegaman said:
I would use a patched ODIN and fully flash TMB firmware alongside user_data, it would be a fully factory reset but it will be T-Mobile from the very beginning.
Click to expand...
Click to collapse
Ah, I did not use a patched Odin. Perhaps that is where I went wrong?
I did flash User Data.
Thank you for the suggestion!
In case this is helpful to others with the Fold 4 and the wrong CSC, I was able to change from ATT to TMOB using SamFW FRP Tool V3.1 (not the latest, but one that had a working CSC changer).
At the end it said it was rebooting, but it never did and I just manually restarted it and all was good
Flame Red said:
In case this is helpful to others with the Fold 4 and the wrong CSC, I was able to change from ATT to TMOB using SamFW FRP Tool V3.1 (not the latest, but one that had a working CSC changer).
At the end it said it was rebooting, but it never did and I just manually restarted it and all was good
Click to expand...
Click to collapse
Thanks this may help my situation
Can you flash unlock CSC to use T-Mobile on Verizon?
Related
Hello all, new here and I just purchased a Note 8 from Verizon. The device is paid off fully and i wish to use my T-Mobile simcard in it but it does not seem to be picking up a signal. I did update the verizon software to the latest version when i had my verizon sim card inserted. Verizon customer service told me i need to reset to factor setting then my t-mobile sim should work but this has not helped.
How can i get my t-mobile sim to work? Any help appreciated as i am new to android phones!
Thanks
Hi there, you must flash the new N950U1 2BQK1 or N950U 2BQK2 stock firmware to have full access of T-MOBILE Network. It's the only way it will work, I have AT&T NOTE 8 working on Verizon network with zero problem.
---------- Post added at 02:35 PM ---------- Previous post was at 02:31 PM ----------
It's a very easy process to flash the 4 US Carriers firmware, I have done it more than 50 times and I'm not a developer.
kdecoteau1 said:
Hi there, you must flash the new N950U1 2BQK1 or N950U 2BQK2 stock firmware to have full access of T-MOBILE Network. It's the only way it will work, I have AT&T NOTE 8 working on Verizon network with zero problem.
---------- Post added at 02:35 PM ---------- Previous post was at 02:31 PM ----------
It's a very easy process to flash the 4 US Carriers firmware, I have done it more than 50 times and I'm not a developer.
Click to expand...
Click to collapse
I would like to know where to get the firmware and with what do you flash it with? Is there a instructions thread or link.
It's been over 5 years since I have tinkered with a Samsung device.
Hi there. You'll need to have your Note 8 Bootloader version on level 2, meaning 2BQK2, 2BQJA or anything with 2 before the last 4 digits.
1) tmobile SIM card in device
2) Odin v3.12.7 make sure extract
3) 2BQK2 firmware extract all files
4) put all 4 set of firmware files in the right manner, bl,ap,cp and csc. Don't used home-csc only CSC.
Odin and firmware https://androidfilehost.com/?fid=673791459329067572 2BQK2
https://androidfilehost.com/?fid=962157660013069130 2BQL5
https://drive.google.com/open?id=1bRz4RQzmloSgsuYmyLu92cktT_f8hIYp
Unlock firmware
1) any carrier SIM card
2) Odin v3.12.5 Prince Comsey or modified Odin, make sure extract
3) 2BQK1 firmware, extract all files.
4) put all 4 set of firmware files in the right manner, bl,ap,cp and csc. Don't used home-csc only CSC
Odin and firmware https://androidfilehost.com/?fid=745849072291691586 2BQK1
https://androidfilehost.com/?fid=817906626617955896 2BQL2
https://drive.google.com/open?id=1Lw79Q5npvMRdME33-ioqy692ClZ36n4U
First instructions is for if you want stock US CARRIER BLOATWARE FIRMWARE, second instructions is if you want SAMSUNG STOCK FIRMWARE. Follow steps and everything will be fine, happy flashing.
So wait, I have a Verizon Note 8 (currently using MetroPCS perfectly), but I wanted a stock Samsung ROM (without the Verizon crap on it), I can just flash the second set of files instead and done with it?
Yes
Can I use a gsm sim card and a verizon sim card at the same time on verizon branded phone? I see you have to flash the firmware above but am wondering if this would help me.
So much misinformation in this thread.
I don't even know where to start:
The OP was asking why his T-Monile SIM wouldn't work. It doesnt matter which firmware you're on, if the Note 8 is unlocked (the Verizon Note 8 IS unlocked), and it has a clean IMEI, and your SIM is already activated, then it will get 4G LTE. I know. I have a Verizon Note 8, and use it on Tmobile. I used it for over 24 hours with my T-Mo SIM but running thr Verizon firmware with no issues. Only reason I flashed T-Mobile firmware was to rid myself of Verizon bloat and to get wifi calling.
As far as bootloader, that has no effect on the SIM card working. The OP would need a v2 bootloader firmware if his current firmwarealso had the v2 bootload. It probably does, so thats a moot point, but the implication was the v2 bootloader was the only one that would make his SIM work.
I hope the OP got it all figured out.
mmdpkaaa said:
Hello all, new here and I just purchased a Note 8 from Verizon. The device is paid off fully and i wish to use my T-Mobile simcard in it but it does not seem to be picking up a signal. I did update the verizon software to the latest version when i had my verizon sim card inserted. Verizon customer service told me i need to reset to factor setting then my t-mobile sim should work but this has not helped.
How can i get my t-mobile sim to work? Any help appreciated as i am new to android phones!
Thanks
Click to expand...
Click to collapse
If you want T-Mobile to work best follow the switching carrier guide to change CSC code to TMB and then flash the Latest T-Mobile Firmware...
https://forum.xda-developers.com/showpost.php?p=74087340&postcount=1
unitop4 said:
Can I use a gsm sim card and a verizon sim card at the same time on verizon branded phone? I see you have to flash the firmware above but am wondering if this would help me.
Click to expand...
Click to collapse
No way to dual SIM US models without trying to modify the SIM tray...and some have damaged trying to...
BlueFox721 said:
If you want T-Mobile to work best follow the switching carrier guide to change CSC code to TMB and then flash the Latest T-Mobile Firmware...
https://forum.xda-developers.com/showpost.php?p=74087340&postcount=1
No way to dual SIM US models without trying to modify the SIM tray...and some have damaged trying to...
Click to expand...
Click to collapse
plus the second SIM wouldn't have an IMEI assigned to it.
And I agree the OPs best bet is to flash thr T-Mobile firmware. But his issue was he wasnt getting a signal at all with his T-Mo SIM. Flashing firmware won't fix that. Source: I have a VZW Note 8 on T-Mo. Used it with the VZW firmware and a T-Mo SIM with no issues.
Mr. Orange 645 said:
plus the second SIM wouldn't have an IMEI assigned to it.
And I agree the OPs best bet is to flash thr T-Mobile firmware. But his issue was he wasnt getting a signal at all with his T-Mo SIM. Flashing firmware won't fix that. Source: I have a VZW Note 8 on T-Mo. Used it with the VZW firmware and a T-Mo SIM with no issues.
Click to expand...
Click to collapse
Another user had SIM issues and flashed back to factory (theirs was unlocked) then changed carriers and SIM worked again...sometimes a clean flash can work...
Hi all. For me I flash all firmware at clean wipe, never any issues. I have an unlock AT&T Note 8 unlock running the latest Verizon firmware with VZW SIM active. I also have a t-mobile S8+ unlock and running the latest U1 firmware and working with Verizon SIM active. I constantly switch my firmware between tmobile, verizon and at&t to see performance and what ever else feature added.
kdecoteau1 said:
Hi all. For me I flash all firmware at clean wipe, never any issues. I have an unlock AT&T Note 8 unlock running the latest Verizon firmware with VZW SIM active. I also have a t-mobile S8+ unlock and running the latest U1 firmware and working with Verizon SIM active. I constantly switch my firmware between tmobile, verizon and at&t to see performance and what ever else feature added.
Click to expand...
Click to collapse
How did you get ATT N8 to work on VZW? I flashed my Tmo to VZW and i could never get speeds above 1mpbs. Even with unlocked firmware it did not get anywhere with VZW. I heard that its because the IMEI is not in VZWs database.
Hi there. My AT&T Note 8 works great on Verizon network, it's running the latest N950U1 Firmware 2BQL2, everything works great. It will work good on T-Mobile too, lately tmobile network giving trouble, sometimes less than 1 mbps on download. Since June 2017 I been having trouble with tmobile network in my area and around, so I switch to Verizon, couldn't bother the crappie service. My location I get 215 mbps on my note 8, IPhone 8 plus 147mbps download. I prefer Tmobile but it's not working good in area anymore.
[/COLOR]
Mr. Orange 645 said:
plus the second SIM wouldn't have an IMEI assigned to it.
And I agree the OPs best bet is to flash thr T-Mobile firmware. But his issue was he wasnt getting a signal at all with his T-Mo SIM. Flashing firmware won't fix that. Source: I have a VZW Note 8 on T-Mo. Used it with the VZW firmware and a T-Mo SIM with no issues.
Click to expand...
Click to collapse
@Mr. Orange 645
I currently have a Verizon Note 8 with a TMO SIM and I'm getting 4GLTE but a few problems. Most of the incoming calls forward to voicemail and all outgoing calls the data has to drop completely before the call can connect. Will doing the carrier switching updates listed in the link above as well as flashing T-Mobile firmware assist with this problem? The phone is on 2BQK2 currently.
Pastor X said:
[/COLOR]
@Mr. Orange 645
I currently have a Verizon Note 8 with a TMO SIM and I'm getting 4GLTE but a few problems. Most of the incoming calls forward to voicemail and all outgoing calls the data has to drop completely before the call can connect. Will performing the carrier switching updates listed in the link above as well as flashing T-Mobile firmware assist with this problem? The phone is on 2BQK2 currently.
Click to expand...
Click to collapse
Nevermind, I fixed it. I had to perform the carrier switch and flash Tmo's firmware. Running perfectly!
Pastor X said:
[/COLOR]
@Mr. Orange 645
I currently have a Verizon Note 8 with a TMO SIM and I'm getting 4GLTE but a few problems. Most of the incoming calls forward to voicemail and all outgoing calls the data has to drop completely before the call can connect. Will doing the carrier switching updates listed in the link above as well as flashing T-Mobile firmware assist with this problem? The phone is on 2BQK2 currently.
Click to expand...
Click to collapse
Omg exacly whats happening to me? So what steps have you guys followed? Should I switch to T-mobile, or to factory unlocked?
I have Verizon phone, unlocked, and I use T-mobile sim card.
I would appreciate the help
Sent from my SM-N950U using Tapatalk
Verizion note8 with tmobile sim card
This is what happened when I changed carriers from the original verizon note8, on verizon network, with verizon sim and the most recent verizon pie update, to a carriers sim, that is tmobile service. And what happens, I didn't even think was possible... I put the new carriers sim in, truconnect, booted and let the phone register the new sim and network. Checked for update.... the was one, let the phone download and update. And you know how Verizon's boot logo is... it wasn't anymore. Booted the tmobile boot logo and sounds, strange. I'm not super noob and the little bit of knowledge and experience that I do have with roms and updates across carriers usually require physically flashing the rom. Correct me if I'm mistaking. Continuing.... optimizing apps....., huh?! The update flashed the tmobile software, without effecting any personally installed apps. Though the update did remove all the verzion software/bloatware, without permissions, and installed tmobile apps. 2 that are meant for user usage. They are tmobiles device unlock and the tmobile app. Which I might add, do not function, I surmise, because in not on the actual main tmobile network, but a scabbed on. I have never seen or experienced anything of the short. Please tell me if this is normal.? I was a bit upset. I did not give any carrier the permission to delete or install any app on my phone. But maybe things have changed since I dabbled. And If they have, maybe this might help the people that have been using Odin to get tmobile version rom while originally being a verzion phone. I dont think it's normal. Please tell me if this has happened to you.
Hey all,
I was given an S9 (Exynos version, unlocked, SM-960F/DS) that had TWRP installed on it, but was stuck in a boot loop. After messing with it for a while, I stuck it in a drawer and forgot about it until recently, when I pulled it out and decided to just restore it to stock. I downloaded a ROM for that specific model from this site ( https://forum.xda-developers.com/galaxy-s9/how-to/official-firmware-thread-regions-t3765015 ) and flashed it using Odin. This got the device to boot fine to the setup, but it defaulted to German, and rejected any SIM I put in it, even though the phone was originally unlocked. So my question is, now how do I remove the SIM lock again? I'm guessing I'll first have to wait the 7 days for the OEM unlock cooldown to elapse again so I can reinstall TWRP?
tattar8 said:
Hey all,
I was given an S9 (Exynos version, unlocked, SM-960F/DS) that had TWRP installed on it, but was stuck in a boot loop. After messing with it for a while, I stuck it in a drawer and forgot about it until recently, when I pulled it out and decided to just restore it to stock. I downloaded a ROM for that specific model from this site ( https://forum.xda-developers.com/galaxy-s9/how-to/official-firmware-thread-regions-t3765015 ) and flashed it using Odin. This got the device to boot fine to the setup, but it defaulted to German, and rejected any SIM I put in it, even though the phone was originally unlocked. So my question is, now how do I remove the SIM lock again? I'm guessing I'll first have to wait the 7 days for the OEM unlock cooldown to elapse again so I can reinstall TWRP?
Click to expand...
Click to collapse
TWRP/Root/Custom has nothing to do with SIM locks, you'd need a sim unlocking service for that
*Detection* said:
TWRP/Root/Custom has nothing to do with SIM locks, you'd need a sim unlocking service for that
Click to expand...
Click to collapse
Then why would the phone start demanding a PUK for any SIM I insert into it after flashing, when it didn't before? The SIMs work on any other phone I try them in.
tattar8 said:
Then why would the phone start demanding a PUK for any SIM I insert into it after flashing, when it didn't before? The SIMs work on any other phone I try them in.
Click to expand...
Click to collapse
Because certain SIM unlocking services depend on you not wiping the phone in order to keep the unlock
You'll need to unlock it again using a paid service
*Detection* said:
Because certain SIM unlocking services depend on you not wiping the phone in order to keep the unlock
You'll need to unlock it again using a paid service
Click to expand...
Click to collapse
The phone was never locked to a carrier -- it was purchased sealed, factory unlocked.
tattar8 said:
The phone was never locked to a carrier -- it was purchased sealed, factory unlocked.
Click to expand...
Click to collapse
In that case check it has not been IMEI blacklisted due to non payment of contract or reported stolen, you state in your OP it was given to you
If it is IMEI blocked there's nothing XDA can do to help you
*Detection* said:
In that case check it has not been IMEI blacklisted due to non payment of contract or reported stolen, you state in your OP it was given to you
If it is IMEI blocked there's nothing XDA can do to help you
Click to expand...
Click to collapse
What I meant by that was that a friend of mine handed it to me to try to fix after he messed with it in TWRP, getting it stuck bootlooping in the process. He had bought it factory unlocked. I checked the IMEI, it's clean. It's demanding PUKs for any SIM I put in it, even though those SIMs work in other phones; I tried a Ting SIM and a Cricket SIM.
tattar8 said:
What I meant by that was that a friend of mine handed it to me to try to fix after he messed with it in TWRP, getting it stuck bootlooping in the process. He had bought it factory unlocked. I checked the IMEI, it's clean. It's demanding PUKs for any SIM I put in it, even though those SIMs work in other phones; I tried a Ting SIM and a Cricket SIM.
Click to expand...
Click to collapse
Well the only thing I can think is to flash a stock firmware for the region you are in, pick a carrier firmware to force the CSC change, Multi-CSC that contains Germany will default back to that if that is what the phone's original CSC was, but I doubt CSC is causing this
O2U CSC (United Kingdom) for G960F is a single CSC, flash it using CSC and not HOME_CSC along with the other 3 sections
But it seems to me this was not originally a factory unlocked handset, it was unlocked by an unlocking service and sold as one
If that doesn't work, pay for an unlocking service
*Detection* said:
Well the only thing I can think is to flash a stock firmware for the region you are in, pick a carrier firmware to force the CSC change, Multi-CSC that contains Germany will default back to that if that is what the phone's original CSC was, but I doubt CSC is causing this
O2U CSC (United Kingdom) for G960F is a single CSC, flash it using CSC and not HOME_CSC along with the other 3 sections
But it seems to me this was not originally a factory unlocked handset, it was unlocked by an unlocking service and sold as one
If that doesn't work, pay for an unlocking service
Click to expand...
Click to collapse
Is there a way I can find out what carrier the phone thinks it's locked to, or would I just have to get SIM cards from around the world and try them?
Can I do this without enabling OEM Unlock (so without letting the phone run for 7 days)?
tattar8 said:
Is there a way I can find out what carrier the phone thinks it's locked to, or would I just have to get SIM cards from around the world and try them?
Can I do this without enabling OEM Unlock (so without letting the phone run for 7 days)?
Click to expand...
Click to collapse
Samsung Phone INFO will tell you the current CSC, but if it defaulted to German either you flashed a German firmware or that is the default CSC
OEM unlock is only needed for custom
Flashing a Multi-CSC ROM such as BTU for United Kingdom will have the greatest chance of it defaulting to it's original CSC
I used that app, and it indeed says the phone's CSC is German, Deutsche Telekom from what I could tell. I tried flashing a number of different FW packages (including the UK and Singapore ones) but it still defaulted to German each time.
I tried going to their unlock page and entering the IMEI, but they have no record of it being sold by them.
tattar8 said:
I used that app, and it indeed says the phone's CSC is German, Deutsche Telekom from what I could tell. I tried flashing a number of different FW packages (including the UK and Singapore ones) but it still defaulted to German each time.
I tried going to their unlock page and entering the IMEI, but they have no record of it being sold by them.
Click to expand...
Click to collapse
Like I said, try flashing a carrier branded firmware like O2U, it cannot default to German if that CSC is not included
Flash using CSC and not HOME_CSC
Sim lock is on its own secure enclave chip, so if this was truly Sim unlocked then it isn't even possible to "relock". Either was unlocked in an unreputable way, or is IMEI blocked as mentioned before.
So I just got time to re-visit this project. I flashed O2U firmware, and it defaulted to English and shows the corresponding CSC. The phone is still locked, and I checked a bunch of IMEI blacklist checkers and each one comes back clean. At this point I accept that the phone is actually locked by a carrier, so I need to instead figure out how to get it unlocked, and to do that I need to figure out what carrier it's locked to. Like I said earlier, I tried entering the IMEI into Deutsche Telekom's unlocking page, and they have no record of them having locked that phone. So how would I go about figuring out what carrier it's locked to? If that information is on its own secure enclave chip, is there any way to read it?
Afaik german providers are forbidden by law to simlock phones for several years already. Problem must be somewhere else.
Try entering the PUK of any SIM if that's what's requested. It should be on the full size SIM, else contact your mobile network operator.
Has anyone had success with installing carrier firmware on an unlocked phone from a different carrier? I am able to flash XAA (unlocked) software to the phone but haven't had success with verizon software. After installing the unlocked software, I lose the original T-mobile screen when powering on along with all the bloatware. However, if I try to flash verizon firmware onto it, it reverts back to T-mobile screen, bloatware etc.
I've tried the following:
TMB-->VZW (fail, stays TMB)
TMB-->XAA (success, even changes phone info to SM-n975u1)
TMB-->XAA-->VZW (fail, reverts to TMB)
VZW software used was for SM-n975u as that was what people had success with when I looked through forums.
I'm going to leave it with unlocked firmware for now but would appreciate any tips with flashing verizon firmware. I'd like to get all the verizon features if possible.
Are you trying to use you T-Mobile SIM card with it as Verizon? If so, newer firmwares will prohibit that due to the SIM detect function.
Thanks for the response. No, I'm using my Verizon sim card. The call, text, web actually work fine. I was just hoping to get functions like Verizon Voicemail, call filter etc.
Did you boot your phone with the VZW SIM after flashing XAA? You have to do this before flashing the VZW firmware. That's worked for me when I went from ATT --> XAA + boot with VZW SIM --> VZW
Sent from my SM-N975U using Tapatalk
No I havent tried that yet! Will attempt it when I get home from work and update the post. Thanks guys!
I flashed xaa and put in my vzw sim, restarted the phone and then tried to flash vzw. Unfortunately that did not work. Still comes up Tmobile.
I'm trying to get my unlocked att Note10+ to Verizon. I hope flashing will get this to work
As of now, I think just using the unlocked xaa firmware is your best option. Download the xaa firmware using samfirm or sammobile and flash it with Odin. It seems to be working fine for me currently. I cant get all Verizon functions like Verizon Voicemail but I haven't noticed many other issues.
ferzmedina said:
Did you boot your phone with the VZW SIM after flashing XAA? You have to do this before flashing the VZW firmware. That's worked for me when I went from ATT --> XAA + boot with VZW SIM --> VZW
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
I tried this and it's working fully. WiFi calling. Visual voicemail and Verizon boot animation and Verizon apps
Att note 10 to XAA to verizon
Whatisveal said:
As of now, I think just using the unlocked xaa firmware is your best option. Download the xaa firmware using samfirm or sammobile and flash it with Odin. It seems to be working fine for me currently. I cant get all Verizon functions like Verizon Voicemail but I haven't noticed many other issues.
Click to expand...
Click to collapse
Are you flashing the Verizon Userdata as well in Odin?
do anyone have stock firmware for SM-N975U trying to remove the frp on it it a verizon version dont care about erasing the data on it
Out of curiousity why did you want to got to verizon? I have found a software issue with the n976V firmware that locks out verizon MVNO sims. Seems to bypass the sim data per my carrier.
Was looking to go the other way.
Good day everyone!
I recently got a new phone (Galaxy S21), and I saw that you can bring your own phone to Tracfone, so I gave my Verizon S9 (SM-G960U) to my wife (to upgrade her old Samsung Tracfone phone).
We bought and installed the Tracfone SIM card and everything seemed to be working (she could make and take phone calls).
Little did I realize that Tracfone actually also uses WiFi for phone calls, and thus making and taking calls was not using Tracfone's network while connected to WiFi.
When we started researching why her phone did not work outside the home, we found that the CSC is still set to VZW.
This S9 has the latest April 2021 security update from Verizon (Android 10).
I downloaded an older stock Tracfone ROM, but Odin fails with an Auth error (presumably because the phone is not unlocked nor rooted, and the bootloader is locked).
I also tried just flashing the CSC with a Tracfone CSC, but it also failed with an Auth error.
All of the research I have done to this point indicates that Samsung makes flashing Android 10 Galaxy phones very difficult, and I suspect that I am screwed.
Should I put the Verizon SIM card back in and beg Verizon support for an unlock code? Will that even help?
Why doesn't the Tracfone SIM card override the VZW CSC? I thought the SIM card would take precedence.
Thank you in advance, and I hope I am not repeating another thread (I searched, but I couldn't find anything related to changing CSC or rooting a Samsung Galaxy phone running Android 10).
P.S. I have no objections to performing a factory reset of the phone if it will help.
P.P.S. I would like to run the stock Tracfone S9 image so my wife can get the OTA updates, but I'm willing to do whatever to get it working (I would even be happy with running the existing VZW firmware as long as it works).
Hi guys just got a new phone supposed to be uk unlocked sim free brand new.but its weird
The service provider sw ver dont look english to me
SPR/XAA/VZW
I have my ee sim card inserted and it works to make calls. But there is a weird notification saying OMADM activation not completed
Also says LTE on the screen something I've never heard of or seen here in england we use 4g volte.so I'm confused also the software for uk phones are BTU/BTU/BTU OR XEU/XEU/XEU
And last the box is weird as it says unlocked by Samsung and has a warming saying reproductive harm I was thinking wtf is this phone.
Also it says Qualcomm on the top on a sticker,we use xenox version england
Ps I brought it from Amazon uk
none of it of sounds like a uk version. more like a us one.
raul6 said:
none of it of sounds like a uk version. more like a us one.
Click to expand...
Click to collapse
Can you go into detail please as I'll need to send it back unless there is a way to change it to a uk phone.and what is omadm error popping up on every reboot
Bump for help please guys
No Samsung or phone experts here?that knows what any of this means?
haircut123 said:
Can you go into detail please as I'll need to send it back unless there is a way to change it to a uk phone.and what is omadm error popping up on every reboot
Click to expand...
Click to collapse
you have us version. it can't be turned into uk one. the error is to the with original us firmware and us network
I think it's a Sprint variant.
Samsung CSC Codes List (All) | Change CSC on Samsung Devices
Today, we'll explain Samsung CSC codes. Besides, we also have a list of CSC codes or region codes with a method to change CSC on Samsung.
www.droidviews.com
Is it new?
Yes from amazon uk
So this phone cant be used here in England then other than making phone calls ?and how do I get uk firmware onto the phone?I'm a noob and not good with computers
Also changing the csc codes to uk what will that change?as we dont even have the snapdragon model in england?so would there even be uk firmware for an American phone?
Google tells me spr means sprint and that's the first code of the 3
Vzw looking on google means Verizon and that's the 3rd code so the phone was originally a Verizon locked phone.thats was unlocked and flashed with sprint fw, because the second csc code says xaa and apparently that means unlocked.
So what does this mean for me a uk user.luke I said in the uk our phones are BTU/BTU/BTU or XEU/XEU/XEU if there uk and unlocked
If you have a active sim, try inserting it.
It should come online.
My unlocked 10+ I just got did, zero issues.
If not I would return it.
blackhawk said:
If you have a active sim, try inserting it.
It should come online.
My unlocked 10+ I just got did, zero issues.
If not I would return it.
Click to expand...
Click to collapse
How can I flash uk xenox firmware onto an American snapdragon phone?.I'm a beginner when it comes to this.as I only buy uk phones as I'm in the uk and it seems complicated flashing stuff this handset is a u version and I want to make it the f version
You cannot flash UK firmware on your US phone.
Just return it to Amazon, claim full refund as the product is not as advertised: no UK unlocked version, not new. Also screenshot in post #8 refers to firmware of a Note 9, not a Note 10 (N960 is Note 9), this makes this phone even more suspicious...
Return it. There's a lot of bs going on with sellers of this phone. This has gotten really bad. Amazon, saw some deceptive advertising there recently for this model and the N20U.
Best to contact the seller on the phone first; no phone contact, don't use. Make sure you are given full specs on their site and it's compatible with your country/provider.
Buy only a new one if possible. Used ones may be running on Android 11, you don't want that!
I was able to find a reliable US vender and got a new umlocked 10+ 256gb/12gb Snapdragon about a week ago for $800. It was as advertised except due to its manufacturing date is running on Q not Pie. It's a keeper.
OnnoJ said:
You cannot flash UK firmware on your US phone.
Just return it to Amazon, claim full refund as the product is not as advertised: no UK unlocked version, not new. Also screenshot in post #8 refers to firmware of a Note 9, not a Note 10 (N960 is Note 9), this makes this phone even more suspicious...
Click to expand...
Click to collapse
Oh sorry it's a note 9 i apologise.so if I cant change it to a uk firmware is the phone useless to use in the uk other than to call people?because my sim card works to make calls
Also OMADM activation not completed message is pissing me off
What does it even mean.i think my phone has sprint firmware on it?how can I change it to normal unlocked firmware so it's nothing to do with sprint I cant stant that OMADM ITS MAKING ME MAD
And Verizon is what I think the phone was originally.
Last thing the phone was sold as brand new sealed but it's not even in the correct box the phone I have is 128gb not 512gb
And it had a sealed sticker saying euro sim only but the phone is American? I think the box is fake ?as it looks nothing like any note 9 box I've ever seen
I'm going to try and flash the phone the phone is currently csc SPR/XAA/VZW boot loader 5 I've just downloaded android 10 also on bootloader 5 ovbisly the XAA VERSION will it work or can I only download and flash SPR FIRMWARE?
as I'm trying to get rid of the MADMEN activation not completed message
Update I tried to flash it but when I pressed start in Odin nothing happened so I guess I'm stuck on spr for life unless I forrgire out how to change the first csc
haircut123 said:
Update I tried to flash it but when I pressed start in Odin nothing happened so I guess I'm stuck on spr for life unless I forrgire out how to change the first csc
Click to expand...
Click to collapse
Check this https://forum.xda-developers.com/t/...and-guide-to-convert-to-usa-unlocked.3927478/
SubwayChamp said:
Check this https://forum.xda-developers.com/t/...and-guide-to-convert-to-usa-unlocked.3927478/
Click to expand...
Click to collapse
Cheers the phone is u1 allready just cant change SPR TO XAA
So it's impossible to flash to unlocked unbranded so it's going back to the scammer that sold it to me on amazon
haircut123 said:
So it's impossible to flash to unlocked unbranded so it's going back to the scammer that sold it to me on amazon
Click to expand...
Click to collapse
It's not impossible but if you are not experienced with better get it back, it doesn't worth the try, you can end by messing up completely.
I've flashed phones many many times before normally when I update the fw via ota and then regret it and need to downgrade back .this phone I just flashed but the start button wouldn't work because I was trying to flash XAA VERSION and not the SPR VERSION .I guess if I was to follow a guide on changing the csc from SPR TO XAA then flashing will work but what the point i wanted a uk brand new factory sealed sim free handset like I paid for
So this pos phone can go back to the scammer on amazon.its a discrace they are making fake seals on the boxes.using fake accessories and lieing saying the phones are uk.the average person would fall for this lies because the phone is unlocked my uk sim will work but you get that OMADM pop up and it's a nightmare.plus I doubt half the functionality will even work.