Related
Hi @ all,
1st i have to say thx, that i can reg me on that forum . Now to my actual question, im new in the android world, im very good in iOS stuff but now thats my 1st steps in the android world. I bought a used Motorola MB526 (i hope its a defy), and i think its tmo sim locked, because when i put my sim in i have the message "pin to unlock the sim network" on my display, i dont have any sim-pin or sim-lock on the sim itself.
And cause im new with that, i dont know what steps i have to do now :/ I have some specs from it :
Code:
SystemVersion:
45.0.1251.MB526.T-Mobile.en.DE
Modell:
MB526
Android Version:
2.3.5
Baseband Version:
EPU93_U_00.60.00
Kernel Version:
2.6.32.9-gbdd614e
[email protected] #1
Build Number:
4.5.1-134_DFP-1251
I hope someone can help me out, thx alot in advance
there are serveral ways:
1. you pay a "service" to calculate your unlock code by giving them your imei, country and net-provider
2. you can have a look at the links in this thread: http://forum.xda-developers.com/showthread.php?t=1464645
-root your phone
-install cm7 (which of course i would only do after reading a LOT of stuff here in this forums of course)
-install the software from the external links
-run it
both ways are somewhat risky and you might have a chance to loose some money (1. way) or your phone (2.)
if you have not done it already i would also recommend some searching. there are quite some topics around on this.
cheers
Thanks alot for the reply . I surfed the tmo wepsite, and on it there is a "sim unlock" section where i can enter my imei, i did that and became an unlock code directly on their homepage. And it works
Now i can with my eplus carrier with that defy . Now i have another question, can i update the oS that is installed on the device ? You see my specs above Android Version etc. is that okay or can i go higher ?
j0k3r0815 said:
Thanks alot for the reply . I surfed the tmo wepsite, and on it there is a "sim unlock" section where i can enter my imei, i did that and became an unlock code directly on their homepage. And it works
Now i can with my eplus carrier with that defy . Now i have another question, can i update the oS that is installed on the device ? You see my specs above Android Version etc. is that okay or can i go higher ?
Click to expand...
Click to collapse
Well you could always go higher and higher by rooting
Sent from my MB526 using XDA App
Root rulez!
You do even own a Defy+.
Since I own the same phone i would recommend rooting the phone, install MS2Ginger 2.1 with all the patches you like and even V6 Supercharger, which is really a must-have! My Defy+ got considerably snappier with this script.
But regardless what you do: Do a NANDroid backup first after root!
I need root for my prestigio multiphone PAP3500duo
any help will be appreciated
thnx in advance:good::good:
pls help us
I also have this phone and i cant root it because adb do not find my device because the drivers are unknown.
PAP3500 Duo
I'm really new and I would like to root my Prestigio PAP3500 Duo.
Maybe someone have new ROM with the new version of android for this phone?
Any advice would be greatly appreciated.
PAP3500 rooted
mroqu said:
I'm really new and I would like to root my Prestigio PAP3500 Duo.
Maybe someone have new ROM with the new version of android for this phone?
Any advice would be greatly appreciated.
Click to expand...
Click to collapse
I found the solution on a polish websites.
You have to use unlockroot application.
I'm looking for a new ROM maybe new Android version for this phone?
At the beginning I tried to root the phone with the Zhoudashi but it didn't work but now I have a problem with the phonebook.
When I have an incoming call the name is not match from the phonebook - I see only the phone number
As the name of SIM1 and SIM2 I have the china letters and even the hard reset does not solve these problems. Of corse I can change the name for the SIM card but I think my ROM has been modified by zhoudashi application.
What can I do to fix it?
Easy Way!
akram_asfoor said:
I need root for my prestigio multiphone PAP3500duo
any help will be appreciated
thnx in advance:good::good:
Click to expand...
Click to collapse
Hey Akram!
Your device is a clone of Micromax A56.
Follow this instructions for rooting - http://forum.xda-developers.com/showthread.php?t=1829389
Follow this instructions for CWM - http://forums.droidbeans.com/microm...based-recovery-for-micromax-a56-and-a57-ninja
Then, backup your rom and then please upload it somewhere!
I ll provide links to more than 5 Custom Roms if you do so.
mroqu said:
I'm looking for a new ROM maybe new Android version for this phone?
At the beginning I tried to root the phone with the Zhoudashi but it didn't work but now I have a problem with the phonebook.
When I have an incoming call the name is not match from the phonebook - I see only the phone number
As the name of SIM1 and SIM2 I have the china letters and even the hard reset does not solve these problems. Of corse I can change the name for the SIM card but I think my ROM has been modified by zhoudashi application.
What can I do to fix it?
Click to expand...
Click to collapse
Your's 3500 clone is here why r u waiting.....Action
http://forum.xda-developers.com/show....php?t=2204370
hello ! after a week of testing ive finally found a solution for samsung galaxy s4 clone ( mt6572 gt-i9500 ). with no service !
Soo , you have no service and can't make calls ! follow this instructions and you will be talking on your phone in no time
Its very simple : ( i'll add the necessary links / software for this job )
1. you need SP_Flash_Tool_exe_v3.1316.0.150
2. you need the WORKING ROM ! modified by me
3. you need MtkDroidTools
( this version is allready modified to work with mt6572 )
The procedure :
we must first format the phone using SP_Flash_Tool_exe_v3.1316.0.150 . soo we open the program and select the scatter file.txt atached in the rom . hit format and then hit OK.
Now remove the battery and connect the usb cable to the phone. it will start formatting the phone. wait till is ready ( you will see a green circle )
At this point , the phone is ready to receive the new ROM
you have allready selected the scatter file early'r .
THIS STEP IS VERY IMPORTANT !!! uncheck the CACHE and USRDATA at the bottom.
Now hit Download button , you will get a warning message, just press YES
Now put the baterry back into the phone, and connect the usb cable. wait till the process end's and when you see the green circle you can disconect the phone, remove the battery, insert back the battery and power on the phone , and voila !! your phone have working network !!
Next step is to write the IMEI...
Use MtkDroidTools ( you must have debugging mode on in the phone ) connect the phone to the usb cable, wait till MtkDroidTools see your phone , and then hit the big imei button. There you must provide the imei number ( you can find it under the battery ) after that you hit write imei and then reset your phone and you are good to go
I presume that you allready have the usb drivers ( if not, i can also provide them )
For other questions use the forum below
If i have saved your day, maybe you consider making a small donation ( for that, use the DONATE TO ME button under my name )
Have a nice day !
Thanks for this tut, @pacattosul its very easy to follow, unlike some I've come accross, could I ask this?, will this not work by just using Mtkdroid tools as in the latter part of your tutorial? without the need of flashing a new rom?
Also I hope you dont mind a bit of constructive criticism, the developer of Mtkdroid tools @rua1 has specifically asked that his program is not placed on other sites for download, perhaps you could just change your post to link to his thread, here..... http://forum.xda-developers.com/showthread.php?t=2160490 Plus I do feel you are rather inviting problems by not specifying the details and build of your device that you have tested this method on, I don't have this phone but I'm sure there are quite a few different versions out there and the result of flashing the wrong preloader for your device can be a $200 paperweight, as I'm sure you know, and with that in mind I would stress that before embarking on this, a full backup is desirable in case it all goes t*ts up. Hope you don't mind my mentioning this stuff, if you decide to make those few minor changes, I'll edit and delete this paragraph, don't want to spoil your thread.
hello oscarblue48 !
i really don't mind that you point my mistakes... im actually happy cause as you say, MTKtools its somebody's work and should really be apreciated. BUT, this tutorial only work's with this special version of MTKtools !! i'm not responsable if you use any other tools/versions !!
you say that people may broke 200$ phone if they flash this rom... ok it may happend, but only if they mistake the model-version of the phone ! like ive say'd this tutorial and the rom only goes for MT6572 GT-I9500 SAMSUNG GALAXY S4 CLONE !! if they flash this rom on other devices they are responsible for what they do...
Actually , this rom goes for dead phones as well ( as i mentioned on other site ) , so i supose that most of the people , when they reach this tutorial, its for a good known reason
You also ask me if you can only use the mtktools... well you can easylly use that program, but you will probably not change anything inside that phone. most of the people try'd mtktool and complain that the imei remains null or empty after writing with this tool... soo in order to fix the annoyng NO SERVICE problem, i recommend that you follow the entire tutorial
I hope ive answered all your questions, and offcourse if you encounter any problem you can allways comeback and simply ask
Hi bro help me out here is my thread : http://forum.xda-developers.com/showthread.php?p=50483872
I tried your rom but still not working i can enter to recovery mode with different preloader and doesn't show me black screen when turned on as my big problem is i can not format my nand as you will see in my thread i was messing up with boot logo via root as it was rooted with supersu...so any help please as i have tried alot roms and i can't find stock rom for this phone MTK6572_S00 samsung s4 this is made in korea by samsung...and I do not have backup of my rom...
Thanks in advance
Please help
Always getting - 4032(DRAM FAILED) while downloading- Followed same steps !
Appreciate any help
Update:
I have flashed it successfully - Also the IMEI, but still not registering to network.
be aware !! you have the dual sim ( 2 sim ) phone or single sim?? this only works for single sim phone... also, you must not try to flash this on dual sim phone !!
try this... go to settings and at the network tab change the connection mode... chose hspda preffered... that may do the trick !
@pacattosul would you please give me thelink file?cuse i'm having the same problem my device cannot detect any sim card my device is
hardware : mt 6572
model : gt i9500
buildnumber :alps.jb3.mp.v1
build date utc : 20140116-083248
android v :4.2.2
basebanv :molly.wr8.w1315.md.wg.mp.v1.p4.2013/09/27 05:05
kernel :.4.5([email protected])(gcc version 4.6 x google
. thank u
pacattosul said:
be aware !! you have the dual sim ( 2 sim ) phone or single sim?? this only works for single sim phone... also, you must not try to flash this on dual sim phone !!
try this... go to settings and at the network tab change the connection mode... chose hspda preffered... that may do the trick !
Click to expand...
Click to collapse
Hi mine is single dim and exactly same as urs. No matter what I choose it always goes to gsm only
Sent from my D5503 using xda premium
are you using a 3G only sim card? hope you understand what i mean to say... there are normal sim cards that can connect on edge or 3g network and some other company's that only use 3g network... if you use one of this sim cards, please try another sim card just till you get on the network , and then you can switch to your regular sim card...
hope that help's you..
Sometimes saying thanks is not enough.
hardware : UNIVERSAL5410
model : i9500
buildnumber :JDQ39.19500XXUAMDK_v2
build date utc : 20140215-054157
android v :4.2.2
basebanv :moly.wr8.w1315.md.wg.mp.v1.p3,2014/02/11 14:38
kernel :.3.4.5 ([email protected])(gcc version 4.6 x google
please links
[email protected]
pacattosul said:
are you using a 3G only sim card? hope you understand what i mean to say... there are normal sim cards that can connect on edge or 3g network and some other company's that only use 3g network... if you use one of this sim cards, please try another sim card just till you get on the network , and then you can switch to your regular sim card...
hope that help's you..
Click to expand...
Click to collapse
I think i found the problem , nothing to do with ROM i assume, it was all about IMEI, the IMEI given (as well as printed on device) seems invalid!!
Thanks anyways
Please could i have the link to the rom?
Many thanks
Paul
Could I also have the link for the rom and the usb drivers, please?
S4 Clone Mtk6572 error 4032
hello all specialists
I have a clone mtk6572 s4 s00
have unfortunately formatted with flash tool
since it is a UBIFS system I can no longer flahen it
the pc recognizes it yet but it can not be switched on
ask for your help
1000 thanks:crying:
Canetaazul said:
Could I also have the link for the rom and the usb drivers, please?
Click to expand...
Click to collapse
I9500 MT6572 need link for rom, thnks
Hi, can I have the link for your rom, I hope this is the right one for my dead phone.
Build Number: JDQ39.I9500XXUAMDK_v2
Thanks
Hi, can I have the link for your rom, my handset is very loggy, hope this will fix it thanxxx..
Help!!
Please I need your help. I have a bricked S4 clone. Can do you send me the rom link? Thank you.
---------- Post added at 08:13 PM ---------- Previous post was at 08:02 PM ----------
Hi, I have the same device. Did you fix the problems? My S4 is bricked. If you fix the problems please tell me how did you do?. Thanks
Will this work on MT6589
i have a rooted s4 clone and out of nowhere the network stopped. will your method work on my phone?
Quad core ARM v7 1.6ghz
Please link up ROM and droid tools
Ok guys everyone has those problems like this so i decided to make a topic for this.
M10 has 3 different variants. So i decided to share correct recoveries for who have problems.
* M10 Generic.
Link : https://www.mediafire.com/?129g74h488m93gj
* M10 Lifestyle EU. (also known as Indian edition)(I dont remember cid and product id for this model. I was using for my M10 which I bought from Poland phone store. PS not suitable for EU operator devices. They are m10 generic. Not lifestyle.)
Link : https://www.mediafire.com/?e4jde0af1n9surr
* M10 Lifestyle CN. (also known as Asian edition) (Perfume, htc_pmec2tuhl, Espıcally for CID HTCCN701)
Link : http://www.mediafire.com/file/g9wb4e0eoh0qu5j/lifestyleCN.img
For people who doesnt know how to flash :
1) Unlock bootloader via HTC Dev method.
2) Connect phone via bootloader mode.
3) Open adb write following commands:
fastboot flash recovery recovery_file_name.img (Ex : fastboot flash recovery lifestyleCN.img)
4) If you want to open phone in recovery mode use menu from bootloader with your phone.
That's all voila !
Hi, Thank you for sharing this!
But this is completely in Chinese language. Do you have link for English one? I need it for M10 Lifestyle ( htc_pmec2tuhl )
EDIT::
Found how to get English.
1. You need to tap on: 设置 (Settings)
2. In settings menu, tap on last icon on top of page ( World icon )and change to English.
Thanks a lot for this post. I've been struggling for days to get recovery working on my Chinese HTC 10. After reading your post downloaded the correct recovery image, et voila!!
One question remains, after recovery is working, I can flash any rom, or also there I should be careful which one to flash? I tried Leedroid_10 V3.9.0 but it keeps rebooting into bootloader... Any idea how to fix, or what I do wrong? I have not rooted yet, and S-on.
Thanks
Robin.
Fine to have a working recovery but that's it basically for this HTC10 forum. Non of these roms here work on any lifestyle HTC10.
History-
-I hard reseted my phone which locked google account and Mi account(which i cant access for some reason)
- Unlocked Mi account using MCT-MTK bypass and formating certain memory parts using SP Tool.(source)
Now.
- Phone is working. Need to unlock bootloader but couldn't figure out how.
- After unlocking bootloader, I need to change imei. (Which requires to install twrp ig) I am afraid of hardbricking my phone or formating NVram in worst condition.
I referred the following threads but couldn't understand about different type of flashing.
Redmi note 8 pro megathread
Unlock bootloader
Kindly help.
AnkitKumarInXDA said:
History-
-I hard reseted my phone which locked google account and Mi account(which i cant access for some reason)
- Unlocked Mi account using MCT-MTK bypass and formating certain memory parts using SP Tool.(source)
Now.
- Phone is working. Need to unlock bootloader but couldn't figure out how.
- After unlocking bootloader, I need to change imei. (Which requires to install twrp ig) I am afraid of hardbricking my phone or formating NVram in worst condition.
I referred the following threads but couldn't understand about different type of flashing.
Redmi note 8 pro megathread
Unlock bootloader
Kindly help.
Click to expand...
Click to collapse
1/For unlock bootloader
If you dont sure normal method work or not, use mtk client on github.
This link the one i take from Indonesia Begonia Telegram note (you can come their and check), you can use translate and unlock bootloader instant. This one is created based on mtk client github. Use translate and do it or just need follow screenshot.
UBL HARAM...
Requirements : • pc/laptop (rekomendasi yang 64 bit) • windows 10/11 (8/8.1 kemungkinan bisa tapi not tested) *windows 10 ghost spectre superlite juga bisa sudah tested dan untuk windows 7 kurang tau di coba saja. • koneksi internet • doa dan mental yang kuat‼️‼️ Bahan : • Phyton...
telegra.ph
Many tested
2/ Hard brick
You can unbrick hard brick with that MCT Tool and sp flash tool. Many did so dont worry much. If any error, come to begonia Global Telegram (because i stay here) or some other group and get help.
3/ Format Nvram
Only chose "Download only" in SP flash tool
Chose Format and you will lose your IMEI and your NVram as you said
4/ Change Imei
Someone made videos about this, usually one IMEI 2 will work and IMEI 1 gone. You can backup your IMEI first and try.
Kirasu2080 said:
1/For unlock bootloader
If you dont sure normal method work or not, use mtk client on github.
This link the one i take from Indonesia Begonia Telegram note (you can come their and check), you can use translate and unlock bootloader instant. This one is created based on mtk client github. Use translate and do it or just need follow screenshot.
UBL HARAM...
Requirements : • pc/laptop (rekomendasi yang 64 bit) • windows 10/11 (8/8.1 kemungkinan bisa tapi not tested) *windows 10 ghost spectre superlite juga bisa sudah tested dan untuk windows 7 kurang tau di coba saja. • koneksi internet • doa dan mental yang kuat‼️‼️ Bahan : • Phyton...
telegra.ph
Many tested
2/ Hard brick
You can unbrick hard brick with that MCT Tool and sp flash tool. Many did so dont worry much. If any error, come to begonia Global Telegram (because i stay here) or some other group and get help.
3/ Format Nvram
Only chose "Download only" in SP flash tool
Chose Format and you will lose your IMEI and your NVram as you said
4/ Change Imei
Someone made videos about this, usually one IMEI 2 will work and IMEI 1 gone. You can backup your IMEI first and try.
Click to expand...
Click to collapse
Thanks
Kirasu2080 said:
1/For unlock bootloader
If you dont sure normal method work or not, use mtk client on github.
This link the one i take from Indonesia Begonia Telegram note (you can come their and check), you can use translate and unlock bootloader instant. This one is created based on mtk client github. Use translate and do it or just need follow screenshot.
UBL HARAM...
Requirements : • pc/laptop (rekomendasi yang 64 bit) • windows 10/11 (8/8.1 kemungkinan bisa tapi not tested) *windows 10 ghost spectre superlite juga bisa sudah tested dan untuk windows 7 kurang tau di coba saja. • koneksi internet • doa dan mental yang kuat‼️‼️ Bahan : • Phyton...
telegra.ph
Many tested
2/ Hard brick
You can unbrick hard brick with that MCT Tool and sp flash tool. Many did so dont worry much. If any error, come to begonia Global Telegram (because i stay here) or some other group and get help.
3/ Format Nvram
Only chose "Download only" in SP flash tool
Chose Format and you will lose your IMEI and your NVram as you said
4/ Change Imei
Someone made videos about this, usually one IMEI 2 will work and IMEI 1 gone. You can backup your IMEI first and try.
Click to expand...
Click to collapse
Thanks a lot. Kindly provide that RN8pro Telegram group
AnkitKumarInXDA said:
Thanks
Thanks a lot. Kindly provide that RN8pro Telegram group
Click to expand...
Click to collapse
Just type Redmi note 8 pro Telegram and you can find it. Or if you use Indonesian or Philippines,... You can find it, or just join Global one.
THREAD LOCKED
@AnkitKumarInXDA Welcome to XDA! Please note that changing/editing of IMEI is illegal in many countries around the world. Due to this reason, XDA doesn't allow discussions about or support for such a change/edit. As per Rule 9 of the Forum Rules:
9. Don't get us into trouble.
Don't post copyrighted materials or do other things which will obviously lead to legal trouble. If you wouldn't do it on your own homepage, you probably shouldn't do it here either. This does not mean that we agree with everything that the software piracy lobby try to impose on us. It simply means that you cannot break any laws here, since we'll end up dealing with the legal hassle caused by you. Please use common sense: respect the forum, its users and those that write great code.
Click to expand...
Click to collapse
Since you're new here, I recommend you read all of the Forum Rules in case you haven't already.
Regards,
shadowstep
Forum Moderator