Develop Bugs

My Mi Max does not have option for LTE after flashing latest global developer

HI,
I bought my Mi Max 32GB in Indonesia and it came preinstalled with unofficial distributor ROM. It can't do OTA updates, so I flashed to latest MIUI Global Developer using MiFlash Beta through adb edl mode. My bootloader is still locked. The flashing process went successfully and I'm using the device without any problem.
Then I realized that my phone does not have LTE/4G option, I already try everyting on the internet but no result, including:
Set locale to Singapore / Malaysia
Dialing *#*#4636#*#*
Factory reset
Reflash

Flash your max with china stable/dev ROM, wish some lucky there...

yes..
i confirm that LTE will be enabled in both dev and stable china rom
or,,
try the custom rom: RR or CM13
regards

Maybe u can use this trick which need u to add a little modification to your device buildpromt. I already try it before and it works on my mi max.
Actually there is a link that can guide you how to do it but i'm sorry that i can't tell you rightnow coz i forgot about it. I'll do some search for a while and will inform you later when i find it again..
Ps: sorry about the grammar coz am not that fluent enough on english and am a newb in this forum
*update:
Am sorry about the late update and about the guide, am sorry again that i can't give you the link bcoz of the forum rules.
Based from the web, what i can tell you is this :
Firstly,, DWYOR!! am not responsible for bricking your device!!
must have root on device
have root xplorer or buildprop editor or any other like it installed
now use root xplorer navigate it to /root/system then find build.prop
open build.prop with HTML editor or text editor
find text ro.product.device=hydrogen then add # in front of it like this #ro.product.device=hydrogen
save it and reboot
now go to the network setting u can see LTE prefered is there
notes:
this trick can only be applied to MIUI 8 global dev rom (idk if this can also be applied to miui 8 chinese dev vers rom and there is a different edited thing for miui 7)
hydrogen is another name for 3/32 MiMax so for another xiaomi phones it will be different ex. mi4c=libra, RN3 Mediatek=hennessy etc
this trick can be applied to any xiaomi devices(sez the web not me) that already support LTE
lastly,, DON'T FORGET TO ALWAYS BACK UP b4 you do all of this!! in case something goes wrong.
i already tried this and it works on my MiMax running on 6.8.11 global dev rom and now on 6.8.25 global dev rom it also work.

[TOOL][SHARE]Honor Multitool

ORIGIONAL THREAD IS LOCATED HERE AND PLEASE THANK THE DEV'S FOR Their AWSOME WORK.
You can get a short explanation about the tool here but visit the origional link to follow up
What Multi-Tool does:
-SelfAutoUpdate Function
-Unlock/Relock Bootloader.
-Flash TWRP/Stock Recovery.
-Rooting
-Unbrick from bootloop.
-Install ADB drivers
-Install HiSuite for all drivers. (Reccomend delete manualy after installing drivers)
-Debranding (change model/vendor id)
-Flashing users IMG files
Thanks to inside!out and VirusPlus for their awsome work. Cheers:good:

so does this multi tool work for the honor 5c?
it was origianly intended for the honor 6 and then ho nor 7 ...???
also, this is a multi tool for HONOR. But i came across a HUAWEI multi tool(beta v) in the tread somewhere. Does that work for honor 5C??
wanted to know if anyone has experience of using before i give it a try and brick my phone.
Thanks

iantechie1979 said:
so does this multi tool work for the honor 5c?
it was origianly intended for the honor 6 and then ho nor 7 ...???
also, this is a multi tool for HONOR. But i came across a HUAWEI multi tool(beta v) in the tread somewhere. Does that work for honor 5C??
wanted to know if anyone has experience of using before i give it a try and brick my phone.
Thanks
Click to expand...
Click to collapse
I saw that not all phones are supported. Honor 8 is fully functional and few more but not 6X at the moment or few others dont remember the exact model but fornme it was not working on 6x

[HOWTO] AQUARIS X2 / X2 PRO - Emergency Package - QFIL / EDL Unbrick

Only for
BQ Aquaris X2 (zangya)
BQ Aquaris X2 PRO (zangyapro)
Vsmart Active 1 (PQ6001 - rebranded X2 PRO)
Hello,
Since BQ shut down the JSON request service in October 2020, there have been no valid free alternatives in order to recover bricked devices with locked bootloader... and there certainly won't be any more from BQ (the bankruptcy procedure of Mundo Reader S.L. - BQ started in Spain at the beginning of February).
For this reason I've released a special emergency package + related instructions, that I have put together and tested over the past few weeks.
You may find everything in :
Web mirror on Yandex
or
Drivers/Tools + Firmware Repository on Telegram
Spoiler: Screenshots
Stage A - Emergency Package QFIL Flash
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
. .
Stage A - Emergency Package - First Boot
..
Stage B - IMEI / Baseband NVRAM checks & fix
...
The unbrick process requires:
1 compulsory stage ( A = Unbrick Flash )
1 additional stage ( B = IMEI / baseband fix ), which is only required if there are IMEI and/or SIM issues after the unbrick
Note: Please keep in mind that this is NOT a trivial 5 minute process. Anyone who owns a bricked X2 / X2 PRO device must read / follow the instructions carefully and spend around 1-2 hours to fully recover his device.
---------------------
Side Note : Such Emergency Package and related A-B instructions have been assembled & tested to use them ONLY with BQ Aquaris X2 - BQ Aquaris X2 PRO - Vsmart Active 1, that were running vendor-official firmware builds or conventional-unofficial releases (LineageOS, Ubports, etc.).
It is NOT technically compatible with the same HW models, that have been tampered instead to use a so-called "secure" firmware... = if this is your situation, please read the spoiler.
Spoiler: Side Note
Side Note : There are mainly non-technical reasons why, even after Europol dismantled Encrochat network on June 2020, no users with such tampered devices are finding any helpful wipe/flash-instructions in the public domain.
Indeed, the advices for the second/new owners of such (no longer working) devices haven't changed at all.
According to their specific scenarios/behaviours, it's up to them to choose from the following available options :
Try to return the device to the seller & get the money back
.
Contact the Police and provide the device & any information about the seller
.
Disassemble the device & resell the parts (all except the motherboard) as second-hand spare parts
.
Replace the motherboard with a (new or used) compatible one

wow thanks to you and the people that work on that guide !
is it suppose to work on old encrochat phone? cause i get this error with every firehose file.

Hello @randomrepairtech
randomrepairtech said:
wow thanks to you and the people that work on that guide !
Click to expand...
Click to collapse
You're welcome .
randomrepairtech said:
is it suppose to work on old encrochat phone? cause i get this error with every firehose file.
Click to expand...
Click to collapse
Such Emergency Package and related A-B instructions have been assembled & tested to use them ONLY with BQ Aquaris X2 - BQ Aquaris X2 PRO - Vsmart Active 1, that were running vendor-official firmware builds or conventional-unofficial releases (LineageOS, Ubports, etc.) = NOT technically compatible with the same HW models, that have been tampered instead to run such "secure" firmware.
Spoiler: Side Note
Side Note : keep in mind that there are mainly non-technical reasons why, even now - more than 8 months after the dismantling of the network, no users with such tampered devices are finding any helpful wipe/flash-instructions in the public domain.
Indeed, the advices for the second/new owners of such devices (no longer working) haven't changed at all.
According to their specific scenarios/behaviours, it's up to them to choose from the following available options :
Try to return the device to the seller & get the money back
.
Contact the Police and provide the device & any information about the seller
.
Disassemble the device & resell the parts (all except the motherboard) as second-hand spare parts
.
Replace the motherboard with a (new or used) compatible one

Hello, I really need your help, I think I just bought one of those phones with encrochat, but I would like to be sure, could you tell me if there is any way to know if it is one of those infected phones? first of all, Thanks
Sorry if you don't understand me, but I don't speak English, what you're reading is translated

RawMain said:
Hello @randomrepairtech
You're welcome .
Such Emergency Package and related A-B instructions have been assembled & tested to use them ONLY with BQ Aquaris X2 - BQ Aquaris X2 PRO - Vsmart Active 1, that were running vendor-official firmware builds or conventional-unofficial releases (LineageOS, Ubports, etc.) = NOT technically compatible with the same HW models, that have been tampered instead to run such "secure" firmware.
Spoiler: Side Note
Side Note : keep in mind that there are mainly non-technical reasons why, even now - more than 8 months after the dismantling of the network, no users with such tampered devices are finding any helpful wipe/flash-instructions in the public domain.
Indeed, the advices for the second/new owners of such devices (no longer working) haven't changed at all.
According to their specific scenarios/behaviours, it's up to them to choose from the following available options :
Try to return the device to the seller & get the money back
.
Contact the Police and provide the device & any information about the seller
.
Disassemble the device & resell the parts (all except the motherboard) as second-hand spare parts
.
Replace the motherboard with a (new or used) compatible one
Click to expand...
Click to collapse
Hello, I really need your help, I think I just bought one of those phones with encrochat, but I would like to be sure, could you tell me if there is any way to know if it is one of those infected phones? first of all, Thanks
Sorry if you don't understand me, but I don't speak English, what you're reading is translated

RawMain said:
Only for
BQ Aquaris X2 (zangya)
BQ Aquaris X2 PRO (zangyapro)
Hello,
Since BQ shut down the JSON request service in October 2020, there have been no valid free alternatives in order to recover bricked devices with locked bootloader... and there certainly won't be any more from BQ (the bankruptcy procedure of Mundo Reader S.L. - BQ started in Spain at the beginning of February).
For this reason I've released a special emergency package + related instructions, that I have put together and tested over the past few weeks.
You may find everything in :
Web mirror on Yandex
or
Drivers/Tools + Firmware Repository on Telegram
Spoiler: Screenshots
Stage A - Emergency Package QFIL Flash
View attachment 5232541 . View attachment 5232543 . View attachment 5232547
Stage A - Emergency Package - First Boot
View attachment 5232549.View attachment 5232551.View attachment 5232553
Stage B - IMEI / Baseband NVRAM checks & fix
View attachment 5232555.View attachment 5232557.View attachment 5232559.View attachment 5232561
The unbrick process requires:
1 compulsory stage ( A = Unbrick Flash )
1 additional stage ( B = IMEI / baseband fix ), which is only required if there are IMEI and/or SIM issues after the unbrick
Note: Please keep in mind that this is NOT a trivial 5 minute process. Anyone who owns a bricked X2 / X2 PRO device must read / follow the instructions carefully and spend around 1-2 hours to fully recover his device.
---------
Click to expand...
Click to collapse
Hello, I really need your help, I think I just bought one of those phones with encrochat, but I would like to be sure, could you tell me if there is any way to know if it is one of those infected phones? first of all, Thanks
Sorry if you don't understand me, but I don't speak English, what you're reading is translated

Thanks, good job.
I have a BQ Aquaris X5 Plus (gohan) in the same situation, bricked and locked bootloader.
I have stock ROM (2.7.0_20181002-1711-gohan-user-684-Fastboot-FW.zip) and BQ Firmware Flash Tool 5.0, but I don't have the JSON file to unlock it.
Qualcomm HS-USB QDLoader 9008 port is present, I could follow the instructions in this post, I can get most of the content of "EMERGENCY_PACKAGE" from the stock ROM, I only need the files for QFIL (firehose, RawProgram and Patch). I have searched long without result.
I would appreciate help.

Hello
xap3 said:
Thanks, good job.
Click to expand...
Click to collapse
You're welcome.
xap3 said:
I have a BQ Aquaris X5 Plus (gohan) in the same situation, bricked and locked bootloader.
[...]
Qualcomm HS-USB QDLoader 9008 port is present, I could follow the instructions in this post, I can get most of the content of "EMERGENCY_PACKAGE" from the stock ROM, I only need the files for QFIL (firehose, RawProgram and Patch). I have searched long without result.
Click to expand...
Click to collapse
The partitions you find inside the BQ fastboot firmware packages aren't enough to make full emergency/rescue packages. Several reserved partitions are missing indeed.
You can try to make a partial QFIL/EDL package... but keep in mind that such partial packages can't solve in most cases of BQ bricked devices with locked bootloader.
So, as for any BQ device with Qualcomm SOC, if you need/want to make a full QFIL/EDL package for Aquaris X5 Plus (gohan), you'll need anyway another working X5 Plus, in order to extract :
A full EDL dump of EMMC storage partitions, that will allow you to get those missing reserved partitions too
.
A QCN backup, that can be edited & used to restore/fix baseband + IMEIs of your KO device
Programmer & patch / rawprogram files for X5 Plus aren't so hard to find. Through a Google search - such as for instance this one - you can easily find the related references on Spanish and German forums.
Side note: this thread is only for messages / information exchange about the emergency package for BQ Aquaris X2 - X2 PRO & Vsmart Active 1 too (since such phone is just a rebranded X2 PRO without NFC hardware).
For any further & specific discussion/message about X5 Plus, you'd better post a new thread.

RawMain said:
The partitions you find inside the BQ fastboot firmware packages aren't enough to make full emergency/rescue packages. Several reserved partitions are missing indeed.
...
Click to expand...
Click to collapse
Thanks for your answer. I have a lot to learn ...
RawMain said:
Side note: this thread is only for messages / information exchange about the emergency package for BQ Aquaris X2 - X2 PRO & Vsmart Active 1 too (since such phone is just a rebranded X2 PRO without NFC hardware).
For any further & specific discussion/message about X5 Plus, you'd better post a new thread.
Click to expand...
Click to collapse
Sorry for using this thread to request help from another model.
Sincerely, thank you very much.

RawMain said:
Only for
BQ Aquaris X2 (zangya)
BQ Aquaris X2 PRO (zangyapro)
Vsmart Active 1 (PQ6001 - rebranded X2 PRO)
Hello,
Since BQ shut down the JSON request service in October 2020, there have been no valid free alternatives in order to recover bricked devices with locked bootloader... and there certainly won't be any more from BQ (the bankruptcy procedure of Mundo Reader S.L. - BQ started in Spain at the beginning of February).
For this reason I've released a special emergency package + related instructions, that I have put together and tested over the past few weeks.
You may find everything in :
Web mirror on Yandex
or
Drivers/Tools + Firmware Repository on Telegram
Spoiler: Screenshots
Stage A - Emergency Package QFIL Flash
View attachment 5232541 . View attachment 5232543 . View attachment 5232547
Stage A - Emergency Package - First Boot
View attachment 5232549.View attachment 5232551.View attachment 5232553
Stage B - IMEI / Baseband NVRAM checks & fix
View attachment 5232555.View attachment 5232557.View attachment 5232559.View attachment 5232561
The unbrick process requires:
1 compulsory stage ( A = Unbrick Flash )
1 additional stage ( B = IMEI / baseband fix ), which is only required if there are IMEI and/or SIM issues after the unbrick
Note: Please keep in mind that this is NOT a trivial 5 minute process. Anyone who owns a bricked X2 / X2 PRO device must read / follow the instructions carefully and spend around 1-2 hours to fully recover his device.
---------
Click to expand...
Click to collapse
Hi, i have the Aquaris X2 but i think it is in a worse state than just bricked. The phone looks like this and can take pictures and check the time. Unrecognizable by the pc and QFIL, unable to install drivers, unable to do anything. This are all the apps the phone has. Wonder if it is even possible to fix it.

Bushi1312 said:
Hi, i have the Aquaris X2 but i think it is in a worse state than just bricked. The phone looks like this and can take pictures and check the time. Unrecognizable by the pc and QFIL, unable to install drivers, unable to do anything. This are all the apps the phone has. Wonder if it is even possible to fix it.View attachment 5405939
Click to expand...
Click to collapse
Had you success recovered your phone? I have an Aquaris X2 with the totally same problem.
Tried @RawMain 's solution but failed during load partition process. I knew it's because I have no correct programmer file, but don't know how to solve it.

RawMain said:
Only for
BQ Aquaris X2 (zangya)
BQ Aquaris X2 PRO (zangyapro)
Vsmart Active 1 (PQ6001 - rebranded X2 PRO)
Hello,
Since BQ shut down the JSON request service in October 2020, there have been no valid free alternatives in order to recover bricked devices with locked bootloader... and there certainly won't be any more from BQ (the bankruptcy procedure of Mundo Reader S.L. - BQ started in Spain at the beginning of February).
For this reason I've released a special emergency package + related instructions, that I have put together and tested over the past few weeks.
You may find everything in :
Web mirror on Yandex
or
Drivers/Tools + Firmware Repository on Telegram
Spoiler: Screenshots
Stage A - Emergency Package QFIL Flash
View attachment 5232541 . View attachment 5232543 . View attachment 5232547
Stage A - Emergency Package - First Boot
View attachment 5232549.View attachment 5232551.View attachment 5232553
Stage B - IMEI / Baseband NVRAM checks & fix
View attachment 5232555.View attachment 5232557.View attachment 5232559.View attachment 5232561
The unbrick process requires:
1 compulsory stage ( A = Unbrick Flash )
1 additional stage ( B = IMEI / baseband fix ), which is only required if there are IMEI and/or SIM issues after the unbrick
Note: Please keep in mind that this is NOT a trivial 5 minute process. Anyone who owns a bricked X2 / X2 PRO device must read / follow the instructions carefully and spend around 1-2 hours to fully recover his device.
---------
Click to expand...
Click to collapse
Many thanks for your efforts, it's really clear and detail to do the job.
But... I can't unbrick my X2 cause loading partition error. One friend posted his problem as this in another thread (about load partition error,). Though you provided 4 programmer files, where could I download more to try? Or if we can full re-write all firmwares in this phone? Such as remove all partitions and re-build/re-write them?
(I had join the TG group and not found more information...)

Bushi1312 said:
Hi, i have the Aquaris X2 but i think it is in a worse state than just bricked. The phone looks like this and can take pictures and check the time. Unrecognizable by the pc and QFIL, unable to install drivers, unable to do anything. This are all the apps the phone has. Wonder if it is even possible to fix it.
Click to expand...
Click to collapse
Pokers Lin said:
Many thanks for your efforts, it's really clear and detail to do the job.
But... I can't unbrick my X2 cause loading partition error. One friend posted his problem as this in another thread (about load partition error,). Though you provided 4 programmer files, where could I download more to try? Or if we can full re-write all firmwares in this phone? Such as remove all partitions and re-build/re-write them?
(I had join the TG group and not found more information...)
Click to expand...
Click to collapse
Hello @Bushi1312 & @Pokers Lin
The situation of both your tampered devices is just the same as in post 3 of this thread = read the side note and related spoiler.
I have now included such note in the opening post too.

RawMain said:
Hello @Bushi1312 & @Pokers Lin
The situation of both your tampered devices is just the same as in post 3 of this thread = read the side note and related spoiler.
I have now included such note in the opening post too.
Click to expand...
Click to collapse
Thanks for your answer... so, you mean that my X2 had been installed as a "secured firmware" (named "encrochat"?) ? It's a bad news for me. Anyway, thank you very much, at least I can know why it's so hard to be fix now.

RawMain said:
Hello @Bushi1312 & @Pokers Lin
The situation of both your tampered devices is just the same as in post 3 of this thread = read the side note and related spoiler.
I have now included such note in the opening post too.
Click to expand...
Click to collapse
So basically it is impossible to fix it, right?

Bushi1312 said:
So basically it is impossible to fix it, right?
Click to expand...
Click to collapse
to fix what ?
do install the emergency firmware and unlock the firmware with ''fastboot flashing unlock''
then re install your genuine firmware with the emergency mode.
as simple as that

hello to everyone , i am in encrochat case , and i need a encrochat that was used from may 2020 .
i will buy , please can anyone help me ?
i need to prove that have a malware .
thanks in advance .

I have a BQ X2 with private mode could this solution work on it ?

Question Yet Another Bricked Mi Pad 5 after Global Rom

sigh, yes I am embarrased at what I did but I have bricked my Mi Pad 5 and need a hand. Background:
- new Mi Pad 5 China hardware but with Global ROM flashed by the vendor I bought from
- the Mi Pad started up fine and I logged into my google and Mi accounts with no issues
- noticed the bootloader was unlocked and that google play said device is not certified
- I used fastboot OEM LOCK *very stooooopid* and the device rebooted
- on start up is says "This miui version can't be installed on this device" and now it's bricked
- tried to wipe data but no luck same error
- tried miunlock tool but it tells me I have to bind my id to the device :-(
- tried XiaoMiTool V2 but it is also stuck
- tried Mi pc suite but it will not detect the mi pad
Is there way way to simply recovery back to the latest chinese version of the rom - feels like I am stuck between a rock and a hardplace :-(
Thx in advance for your help, FredT

Download an China fastboot rom from https://forum.xda-developers.com/t/miui-updates-tracker-xiaomi-pad-5-nabu.4328591/
Unpack and use the included installer

NisseGurra said:
Download an China fastboot rom from https://forum.xda-developers.com/t/miui-updates-tracker-xiaomi-pad-5-nabu.4328591/
Unpack and use the included installer
Click to expand...
Click to collapse
thx for the advice, I tried it but anything I do with the included installer tells me it can't work on on a locked device.
still looking for a solution....

You can not unlock again?
oem unlock command

yes unfortunately my stupid error was that I did an OEM LOCK thinking that would be ok and to fix the playstore uncertified issue :-(
when I try to unlock it tells me that I need to bind my ID :-(

Fredplex said:
yes unfortunately my stupid error was that I did an OEM LOCK thinking that would be ok and to fix the playstore uncertified issue :-(
Click to expand...
Click to collapse
Unlock again, install stock china rom, factory reset and lock bootloader

yeah when I try to unlock it now it says that I have to bind my MI id again but I can't boot MIUI to do that - so really stuck as it won't let me unlock

when I try oem unlock I get:
C:\Users\fredp\Downloads\miflash_unlock-en-5.5.224.24>.\fastboot.exe oem unlock
...
FAILED (remote: Token Verify Failed, Reboot the device
)
finished. total time: 0.014s
Click to expand...
Click to collapse

How did you unlock it in the first place? Maybe use the same method? Mine (pro 5g) came with CN ROM with the bootloader locked, so I had to go through the usual procedure of binding my Mi account and waiting for 7 days to unlock the bootloader. I used Mi Unlock as Xiaomi suggests.

Mine came from the seller with the global rom installed even on the CN hardware so they went through that process which in retrospective was not such a great idea, my mistake was that I did not bind my ID to the device before trying to lock it.

I don't know if you solved your problem, but when this kind of things happened with Xiaomi phones, you needed someone with an authorized Xiaomi account that could log in Xiaomi flasher and unlock your device for you. I remember seeing a guy from Russia who did this procedure for many people over the k20 pro fórum (he charges 20us I think)
Sorry for the kind of generic information but it's been sometime I saw this and can't quite remember the details. Try to search for more info about that in k20 pro fórum.
What I can tell you is that if you find the right person to do it for you it's quite easy and fast. I think he does it over TeamViewer.
Anyway, don't give up. It is totally recoverable

Here bro, this group in telegram can help you
A guy there has an authorized account
Search for {Mod edit}

tntgdh said:
I don't know if you solved your problem, but when this kind of things happened with Xiaomi phones, you needed someone with an authorized Xiaomi account that could log in Xiaomi flasher and unlock your device for you. I remember seeing a guy from Russia who did this procedure for many people over the k20 pro fórum (he charges 20us I think)
Sorry for the kind of generic information but it's been sometime I saw this and can't quite remember the details. Try to search for more info about that in k20 pro fórum.
What I can tell you is that if you find the right person to do it for you it's quite easy and fast. I think he does it over TeamViewer.
Anyway, don't give up. It is totally recoverable
Click to expand...
Click to collapse
Thx for your suggestion and moral support
In fact I did reach out to {Mod edit} via telegram and within a few short hours i was unbricked and running on the latest stock China ROM!
Life is good again, maybe after I get my courage again I will try the global ROM again ...although right now I have to wait a few weeks for xiaomi to unlock my bootloader

Fredplex said:
Thx for your suggestion and moral support
In fact I did reach out to ... via telegram and within a few short hours i was unbricked and running on the latest stock China ROM!
Life is good again, maybe after I get my courage again I will try the global ROM again ...although right now I have to wait a few weeks for xiaomi to unlock my bootloader
Click to expand...
Click to collapse
Happy to help bro

Fredplex said:
Thx for your suggestion and moral support
In fact I did reach out to ... via telegram and within a few short hours i was unbricked and running on the latest stock China ROM!
Life is good again, maybe after I get my courage again I will try the global ROM again ...although right now I have to wait a few weeks for xiaomi to unlock my bootloader
Click to expand...
Click to collapse
How was this fixed? I also have the same problem(locking the bootloader after flashing and bricking it).

I tried to reachout to {Mod edit} and already paid for the service fee, and I am feeling that this is a SCAM, i have been waiting for a day and still no progress with this. Im confused if this is really a thing for our bricked units. Hope they were just really busy and not a scam.
{Mod edit: Telegram screenshots removed}

Update on my transaction with {Mod edit}, it is legit! Cant beleive they revived my mi pad 5. This thread is a big help. Thanks!

Moderator Announcement
Thread has been cleaned from Telegram references. Promotion of paid services is not accepted. Please additionally note XDA's stance regarding social media references:
Telegram Chat Channels - Way Forward
WhatsApp/Telegram Groups and Channels - Going Forward Hello XDA family! Just notifying all members that posting certain links to Telegram and other sites like WhatsApp is now allowed on XDA. What does that mean? We will allow links to messages...
forum.xda-developers.com
Regards
Oswald Boelcke
Senior Moderator

Oswald Boelcke said:
Moderator Announcement
Thread has been cleaned from Telegram references. Promotion of paid services is not accepted. Please additionally note XDA's stance regarding social media references:
Telegram Chat Channels - Way Forward
WhatsApp/Telegram Groups and Channels - Going Forward Hello XDA family! Just notifying all members that posting certain links to Telegram and other sites like WhatsApp is now allowed on XDA. What does that mean? We will allow links to messages...
forum.xda-developers.com
Regards
Oswald Boelcke
Senior Moderator
Click to expand...
Click to collapse
I understand the reason...
But how can we suggest a solution to people with bricked device if this is the only option available?

xchamelionz said:
I understand the reason...
But how can we suggest a solution to people with bricked device if this is the only option available?
Click to expand...
Click to collapse
Thanks for your understanding. I see the difficulties; however, we've our rules and stances and don't want XDA to be the platform for somebody to make money.
Regards
Oswald Boelcke

Question FRP Bypass Google Ui 5.1 Android 13 Feb security

Hi guys, so I have a Samsung A22, UI 5.1 android 13 and binary 4, wich means there's no binary 4 android 12 firmware compatible with my phone so I can easily bypass, I managed to get to google chrome, galaxy store etc... I downloaded the OS14 Launcher so I can open some apps, but the problem is I can't do what the youtube guys do, like give media and files permisson to Xshare. There is no usefull tool I can use like MTK or SamFw, they can't send me the ADB exploit, I tried it a million times, any idea how I can bypass??? Like I said, I am already on the Chrome and OS14 step.

ghoulkira said:
Hi guys, so I have a Samsung A22, UI 5.1 android 13 and binary 4, wich means there's no binary 4 android 12 firmware compatible with my phone so I can easily bypass, I managed to get to google chrome, galaxy store etc... I downloaded the OS14 Launcher so I can open some apps, but the problem is I can't do what the youtube guys do, like give media and files permisson to Xshare. There is no usefull tool I can use like MTK or SamFw, they can't send me the ADB exploit, I tried it a million times, any idea how I can bypass??? Like I said, I am already on the Chrome and OS14 step.
Click to expand...
Click to collapse
Please follow this tutorial here
Samsung A22 5G FRP Reset using SP Flash Tools - Works irrespective of Android versions installed.
Samsung A22 5G FRP Reset - Works irrespective of Android version installed. Credits: Thanks to xda developer @Xyz who discovered the MTK exploit and made auth bypass possible. You can support him on github. This tutorial shall work on Any...
forum.xda-developers.com

I might be wrong, but I think that didn't bypassed the google account step

ghoulkira said:
I might be wrong, but I think that didn't bypassed the google account step
Click to expand...
Click to collapse
May you please elaborate your concern?

I want to bypass the google verification account

Mod edit - translated by https://www.deepl.com/translator. Oswald Boelcke, Senior Moderator
i am having trouble unlocking my s20fe as it is in binary 4 of android 13 if anyone can give me a hand i thank you
*******************
oi estou com dificuldades para fazer o desbloqueio do s20fe pois ele esta no binary 4 do android 13 se caso alguem poder me dar uma ajuda eu agradeço

ghoulkira said:
I want to bypass the google verification account
Click to expand...
Click to collapse
Do you still need help with your device?

mvikrant97 said:
Do you still need help with your device?
Click to expand...
Click to collapse
mvikrant97 said:
Do you still need help with your device?
Click to expand...
Click to collapse
You have some reports on AnyDesk, I didn't wnat to risk bro

ghoulkira said:
You have some reports on AnyDesk, I didn't wnat to risk bro
Click to expand...
Click to collapse
To keep users safe Anydesk warns as POSSIBLE SCAM.
No worries. Go through my XDA profile before you make your decision.

Couldn't you help me without anydesk?

ghoulkira said:
Couldn't you help me without anydesk?
Click to expand...
Click to collapse
You'll need to configure Radmin VPN and USB REDIRECTOR so that I can access your phone.

I have Radmin yes, and I'm going to download USB Redirector

[email protected] said:
Mod edit - translated by https://www.deepl.com/translator. Oswald Boelcke, Senior Moderator
i am having trouble unlocking my s20fe as it is in binary 4 of android 13 if anyone can give me a hand i thank you
*******************
oi estou com dificuldades para fazer o desbloqueio do s20fe pois ele esta no binary 4 do android 13 se caso alguem poder me dar uma ajuda eu agradeço
Click to expand...
Click to collapse
@[email protected]
As courtesy I've translated your above post. With reference to rule no. 4 of the XDA Forum Rules, please post in English or add at least an English translation to your Portuguese posts.
Spoiler: Rule No. 4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ , https://www.babelfish.com/ or https://fanyi.baidu.com/#auto/en or use one of your choice.
Regards
Oswald Boelcke
Senior Moderator

hello, i am having problem i can't unlock google account on my s20 fe android 13 binary 4, anyone help me !

fellype90 said:
hello, i am having problem i can't unlock google account on my s20 fe android 13 binary 4, anyone help me !
Click to expand...
Click to collapse
[FREE] Any Android Version | Any Binary Samsung FRP Unlock
Samsung FRP Unlock -- Any Android Version Any Binary! No need to dial *#0*#. Just plug your phone into your PC. For Admins and Mods Here: How this works? There is no remote connection involved in this operation only user's USB connection is...
forum.xda-developers.com

need enable debugging on a locked android 13 ONE IU 5.1 samsung for frp bypass

letja said:
need enable debugging on a locked android 13 ONE IU 5.1 samsung for frp bypass
Click to expand...
Click to collapse
If you are looking to remove frp please visit the post below
Any Android Version | Any Binary Samsung FRP Unlock
Samsung FRP Unlock -- Any Android Version Any Binary! No need to dial *#0*#. Just plug your phone into your PC. For Admins and Mods Here: How this works? There is no remote connection involved in this operation only user's USB connection is...
forum.xda-developers.com