hello ! after a week of testing ive finally found a solution for samsung galaxy s4 clone ( mt6572 gt-i9500 ). with no service !
Soo , you have no service and can't make calls ! follow this instructions and you will be talking on your phone in no time
Its very simple : ( i'll add the necessary links / software for this job )
1. you need SP_Flash_Tool_exe_v3.1316.0.150
2. you need the WORKING ROM ! modified by me
3. you need MtkDroidTools
( this version is allready modified to work with mt6572 )
The procedure :
we must first format the phone using SP_Flash_Tool_exe_v3.1316.0.150 . soo we open the program and select the scatter file.txt atached in the rom . hit format and then hit OK.
Now remove the battery and connect the usb cable to the phone. it will start formatting the phone. wait till is ready ( you will see a green circle )
At this point , the phone is ready to receive the new ROM
you have allready selected the scatter file early'r .
THIS STEP IS VERY IMPORTANT !!! uncheck the CACHE and USRDATA at the bottom.
Now hit Download button , you will get a warning message, just press YES
Now put the baterry back into the phone, and connect the usb cable. wait till the process end's and when you see the green circle you can disconect the phone, remove the battery, insert back the battery and power on the phone , and voila !! your phone have working network !!
Next step is to write the IMEI...
Use MtkDroidTools ( you must have debugging mode on in the phone ) connect the phone to the usb cable, wait till MtkDroidTools see your phone , and then hit the big imei button. There you must provide the imei number ( you can find it under the battery ) after that you hit write imei and then reset your phone and you are good to go
I presume that you allready have the usb drivers ( if not, i can also provide them )
For other questions use the forum below
If i have saved your day, maybe you consider making a small donation ( for that, use the DONATE TO ME button under my name )
Have a nice day !
Thanks for this tut, @pacattosul its very easy to follow, unlike some I've come accross, could I ask this?, will this not work by just using Mtkdroid tools as in the latter part of your tutorial? without the need of flashing a new rom?
Also I hope you dont mind a bit of constructive criticism, the developer of Mtkdroid tools @rua1 has specifically asked that his program is not placed on other sites for download, perhaps you could just change your post to link to his thread, here..... http://forum.xda-developers.com/showthread.php?t=2160490 Plus I do feel you are rather inviting problems by not specifying the details and build of your device that you have tested this method on, I don't have this phone but I'm sure there are quite a few different versions out there and the result of flashing the wrong preloader for your device can be a $200 paperweight, as I'm sure you know, and with that in mind I would stress that before embarking on this, a full backup is desirable in case it all goes t*ts up. Hope you don't mind my mentioning this stuff, if you decide to make those few minor changes, I'll edit and delete this paragraph, don't want to spoil your thread.
hello oscarblue48 !
i really don't mind that you point my mistakes... im actually happy cause as you say, MTKtools its somebody's work and should really be apreciated. BUT, this tutorial only work's with this special version of MTKtools !! i'm not responsable if you use any other tools/versions !!
you say that people may broke 200$ phone if they flash this rom... ok it may happend, but only if they mistake the model-version of the phone ! like ive say'd this tutorial and the rom only goes for MT6572 GT-I9500 SAMSUNG GALAXY S4 CLONE !! if they flash this rom on other devices they are responsible for what they do...
Actually , this rom goes for dead phones as well ( as i mentioned on other site ) , so i supose that most of the people , when they reach this tutorial, its for a good known reason
You also ask me if you can only use the mtktools... well you can easylly use that program, but you will probably not change anything inside that phone. most of the people try'd mtktool and complain that the imei remains null or empty after writing with this tool... soo in order to fix the annoyng NO SERVICE problem, i recommend that you follow the entire tutorial
I hope ive answered all your questions, and offcourse if you encounter any problem you can allways comeback and simply ask
Hi bro help me out here is my thread : http://forum.xda-developers.com/showthread.php?p=50483872
I tried your rom but still not working i can enter to recovery mode with different preloader and doesn't show me black screen when turned on as my big problem is i can not format my nand as you will see in my thread i was messing up with boot logo via root as it was rooted with supersu...so any help please as i have tried alot roms and i can't find stock rom for this phone MTK6572_S00 samsung s4 this is made in korea by samsung...and I do not have backup of my rom...
Thanks in advance
Please help
Always getting - 4032(DRAM FAILED) while downloading- Followed same steps !
Appreciate any help
Update:
I have flashed it successfully - Also the IMEI, but still not registering to network.
be aware !! you have the dual sim ( 2 sim ) phone or single sim?? this only works for single sim phone... also, you must not try to flash this on dual sim phone !!
try this... go to settings and at the network tab change the connection mode... chose hspda preffered... that may do the trick !
@pacattosul would you please give me thelink file?cuse i'm having the same problem my device cannot detect any sim card my device is
hardware : mt 6572
model : gt i9500
buildnumber :alps.jb3.mp.v1
build date utc : 20140116-083248
android v :4.2.2
basebanv :molly.wr8.w1315.md.wg.mp.v1.p4.2013/09/27 05:05
kernel :.4.5([email protected])(gcc version 4.6 x google
. thank u
pacattosul said:
be aware !! you have the dual sim ( 2 sim ) phone or single sim?? this only works for single sim phone... also, you must not try to flash this on dual sim phone !!
try this... go to settings and at the network tab change the connection mode... chose hspda preffered... that may do the trick !
Click to expand...
Click to collapse
Hi mine is single dim and exactly same as urs. No matter what I choose it always goes to gsm only
Sent from my D5503 using xda premium
are you using a 3G only sim card? hope you understand what i mean to say... there are normal sim cards that can connect on edge or 3g network and some other company's that only use 3g network... if you use one of this sim cards, please try another sim card just till you get on the network , and then you can switch to your regular sim card...
hope that help's you..
Sometimes saying thanks is not enough.
hardware : UNIVERSAL5410
model : i9500
buildnumber :JDQ39.19500XXUAMDK_v2
build date utc : 20140215-054157
android v :4.2.2
basebanv :moly.wr8.w1315.md.wg.mp.v1.p3,2014/02/11 14:38
kernel :.3.4.5 ([email protected])(gcc version 4.6 x google
please links
[email protected]
pacattosul said:
are you using a 3G only sim card? hope you understand what i mean to say... there are normal sim cards that can connect on edge or 3g network and some other company's that only use 3g network... if you use one of this sim cards, please try another sim card just till you get on the network , and then you can switch to your regular sim card...
hope that help's you..
Click to expand...
Click to collapse
I think i found the problem , nothing to do with ROM i assume, it was all about IMEI, the IMEI given (as well as printed on device) seems invalid!!
Thanks anyways
Please could i have the link to the rom?
Many thanks
Paul
Could I also have the link for the rom and the usb drivers, please?
S4 Clone Mtk6572 error 4032
hello all specialists
I have a clone mtk6572 s4 s00
have unfortunately formatted with flash tool
since it is a UBIFS system I can no longer flahen it
the pc recognizes it yet but it can not be switched on
ask for your help
1000 thanks:crying:
Canetaazul said:
Could I also have the link for the rom and the usb drivers, please?
Click to expand...
Click to collapse
I9500 MT6572 need link for rom, thnks
Hi, can I have the link for your rom, I hope this is the right one for my dead phone.
Build Number: JDQ39.I9500XXUAMDK_v2
Thanks
Hi, can I have the link for your rom, my handset is very loggy, hope this will fix it thanxxx..
Help!!
Please I need your help. I have a bricked S4 clone. Can do you send me the rom link? Thank you.
---------- Post added at 08:13 PM ---------- Previous post was at 08:02 PM ----------
Hi, I have the same device. Did you fix the problems? My S4 is bricked. If you fix the problems please tell me how did you do?. Thanks
Will this work on MT6589
i have a rooted s4 clone and out of nowhere the network stopped. will your method work on my phone?
Quad core ARM v7 1.6ghz
Please link up ROM and droid tools
Related
Hi @ all,
1st i have to say thx, that i can reg me on that forum . Now to my actual question, im new in the android world, im very good in iOS stuff but now thats my 1st steps in the android world. I bought a used Motorola MB526 (i hope its a defy), and i think its tmo sim locked, because when i put my sim in i have the message "pin to unlock the sim network" on my display, i dont have any sim-pin or sim-lock on the sim itself.
And cause im new with that, i dont know what steps i have to do now :/ I have some specs from it :
Code:
SystemVersion:
45.0.1251.MB526.T-Mobile.en.DE
Modell:
MB526
Android Version:
2.3.5
Baseband Version:
EPU93_U_00.60.00
Kernel Version:
2.6.32.9-gbdd614e
[email protected] #1
Build Number:
4.5.1-134_DFP-1251
I hope someone can help me out, thx alot in advance
there are serveral ways:
1. you pay a "service" to calculate your unlock code by giving them your imei, country and net-provider
2. you can have a look at the links in this thread: http://forum.xda-developers.com/showthread.php?t=1464645
-root your phone
-install cm7 (which of course i would only do after reading a LOT of stuff here in this forums of course)
-install the software from the external links
-run it
both ways are somewhat risky and you might have a chance to loose some money (1. way) or your phone (2.)
if you have not done it already i would also recommend some searching. there are quite some topics around on this.
cheers
Thanks alot for the reply . I surfed the tmo wepsite, and on it there is a "sim unlock" section where i can enter my imei, i did that and became an unlock code directly on their homepage. And it works
Now i can with my eplus carrier with that defy . Now i have another question, can i update the oS that is installed on the device ? You see my specs above Android Version etc. is that okay or can i go higher ?
j0k3r0815 said:
Thanks alot for the reply . I surfed the tmo wepsite, and on it there is a "sim unlock" section where i can enter my imei, i did that and became an unlock code directly on their homepage. And it works
Now i can with my eplus carrier with that defy . Now i have another question, can i update the oS that is installed on the device ? You see my specs above Android Version etc. is that okay or can i go higher ?
Click to expand...
Click to collapse
Well you could always go higher and higher by rooting
Sent from my MB526 using XDA App
Root rulez!
You do even own a Defy+.
Since I own the same phone i would recommend rooting the phone, install MS2Ginger 2.1 with all the patches you like and even V6 Supercharger, which is really a must-have! My Defy+ got considerably snappier with this script.
But regardless what you do: Do a NANDroid backup first after root!
So I recently bought the m99 from fastcardtech, and rooted it easily with SuperOneClick. I am unable however to install ClockworkMod in any way or form on the device. It identifies itself as a G2x in the model, uses a MTK 6573 processor.
Anyone else have this phone and figure out a way, I'm completely lost and have search for a good week now trying to figure out a way to get ClockWorkMod on this thing.
(also I'm not sure if this is the correct forum to post this in, since there is no forum for my phone model).
Hi There ,
would you please tell me where can i download the original ROM or a full backup for this phone .. i got this phone yesterday and i managed to root it and delete all the chinese apps .
Thanks
Hello
I have one of this this.
And i like to root and first backup the room original one, how can i do that?
For root z4root works or not?
How can i install the market anyone know?
Thanks
---------- Post added at 04:31 PM ---------- Previous post was at 04:24 PM ----------
CustomKal said:
So I recently bought the m99 from fastcardtech, and rooted it easily with SuperOneClick. I am unable however to install ClockworkMod in any way or form on the device. It identifies itself as a G2x in the model, uses a MTK 6573 processor.
Anyone else have this phone and figure out a way, I'm completely lost and have search for a good week now trying to figure out a way to get ClockWorkMod on this thing.
(also I'm not sure if this is the correct forum to post this in, since there is no forum for my phone model).
Click to expand...
Click to collapse
Hello
You have the M99 with Ui iphone?
Did you have the room original? Was nice we get this room available, before try the OC and new rooms.
Any bugs find yet?
Thanks
help me too.. is this a bug?
Did you have the market worked on your phone?
My version is 2.3.6 from android, but the markets i install open, then when i try to download some app they market (process com.vending.android) has stopped unexpectedly
You have this problem to?
Guys ..
To root this phone you have 2 options :
1- SuperOneClick 2.3.3
2- The Chinese root
both are listed at a thread called (Gooapple v5 issues) on this fourm . you also need to install the the drivers for this phone which btw are the same drivers for the GooApple v5 , cuz both phones use the MTK6573 .
for the market problem .. try to install an older market ver.
now I have the phone , but unfortunately things went south couple days ago when i installed some fonts from the android market and forgot to change the permissions . the phone now is stuck at start up logo ,, i tried the wipe and restore to factory options but nothing worked .. the only way i can get it to work is to flash it with the original rom again .i've contacted Fastcardtech to get the update.zip rom for the M99 Google 4s+ , but i haven't heard from them .
so if you have the update.zip rom for M99 Google 4s+ please post a link so i can download it ..
Thanks
Thanks for reply!
Wich market version you use?
Your M99 was from fastcardtech? android 2.3.6?
Well i can help you but im noob in android, how can i get this zip file, or maybe make a "image" of this rom phone like they came to send to you (if this is possible)
Thanks
Mouratti said:
Thanks for reply!
Wich market version you use?
Your M99 was from fastcardtech? android 2.3.6?
Well i can help you but im noob in android, how can i get this zip file, or maybe make a "image" of this rom phone like they came to send to you (if this is possible)
Thanks
Click to expand...
Click to collapse
i truly appreciate you trying to help
i'm looking for both now (rom and a reliable recovery) that can actually work on our phones
i've been looking through the chinese forums in the last couple days , but still no luck .. the problem is the name M99 dosn't exist in thier forums they only have the old ver M98 .. so our phone must have a different name other than M99 ...
i can't really remember which market ver worked , i've tried alot of versions but i'm sure the one that worked was one of the old vers . i wish my phone was working so i can help ya there .
yes i got it from fastcardtech and it has the 2.3.6 with UI rom .
i'll keep looking and i will let you know .
Thanks
Did you try the cyanongean??
How can i help you with the rom??
Did you try root your phone and install any rom?
If you know how can i do to save this rom and send to you it's ok i try.
For the market i used other one apdroid i guess the name and works
How do you enter on recovery wipe?? What you install to get the phone stuck!?
Thanks
IIIVIII said:
i truly appreciate you trying to help
i'm looking for both now (rom and a reliable recovery) that can actually work on our phones
i've been looking through the chinese forums in the last couple days , but still no luck .. the problem is the name M99 dosn't exist in thier forums they only have the old ver M98 .. so our phone must have a different name other than M99 ...
i can't really remember which market ver worked , i've tried alot of versions but i'm sure the one that worked was one of the old vers . i wish my phone was working so i can help ya there .
yes i got it from fastcardtech and it has the 2.3.6 with UI rom .
i'll keep looking and i will let you know .
Thanks
Click to expand...
Click to collapse
Hi guys, I am from the thread "Gooapple v5 issues" I could maybe help you as it is almost the same device.
@IIIVIII What happened to your phone?
Great News ..
i finally gained access to my phone's root while looping through Android Commander and i've managed to reset the permissions to the fonts and now the phone is alive and kicking
@ von275 & Mouratti .. Thank you guys for offering to help i really appreciate it .
here's how to get any Androidmarket ver working on the M99 :
1- root your phone.
2- install root explorer (attached)
3- copy the attached file (Vending) to your phone's root (system/app) and make sure u set the permissions as follows:
Owner: Read /Write
Group: Read
Others: Read
To make Google sync work for contacts do the same as the above steps for these attached files :
1-GoogleCalendarSyncAdapter
2-GoogleContactsSyncAdapter
btw. with root explorer you can remove all the unwanted chinese apps like youku etc. from your root (system/app) just don't go wild ..
i'll be coming back later on with more tweaks ..
IIIVIII said:
Great News ..
i finally gained access to my phone's root while looping through Android Commander and i've managed to reset the permissions to the fonts and now the phone is alive and kicking
@ von275 & Mouratti .. Thank you guys for offering to help i really appreciate it .
here's how to get any Androidmarket ver working on the M99 :
1- root your phone.
2- install root explorer (attached)
3- copy the attached file (Vending) to your phone's root (system/app) and make sure u set the permissions as follows:
Owner: Read /Write
Group: Read
Others: Read
To make Google sync work for contacts do the same as the above steps for these attached files :
1-GoogleCalendarSyncAdapter
2-GoogleContactsSyncAdapter
btw. with root explorer you can remove all the unwanted chinese apps like youku etc. from your root (system/app) just don't go wild ..
i'll be coming back later on with more tweaks ..
Click to expand...
Click to collapse
Great news
Nice one i will try this, did you have a new rom for this phone?
Wich one?
I saw a bug i guess i can put any reminder with a beep sound on my phone, its normal?
Thanks
Mouratti said:
Great news
Nice one i will try this, did you have a new rom for this phone?
Wich one?
I saw a bug i guess i can put any reminder with a beep sound on my phone, its normal?
Thanks
Click to expand...
Click to collapse
Hello Guys
I make a mistake and i delete the keyboard how can i put the keyboard again? Can i install on in market or doing what?
I install a few one but doesn't appear
PS: Now i get it
@Mouratti
try a keyboard called (ITap) or (anysoftkeyboard) both can be found on androidmarket .. get rid of the chinese keyboard these 2 are alot better . plus ITap has IPhone layout so u wont miss the old keyboard
no i heaven't heard from Fastcardtech ..so no new rom
i fixd the phone while running loop on the original rom .
Mouratti said:
Hello Guys
I make a mistake and i delete the keyboard how can i put the keyboard again? Can i install on in market or doing what?
I install a few one but doesn't appear
PS: Now i get it
Click to expand...
Click to collapse
I Have my market work and keyboard and calendar too
Thanks a lot !!
Now i just want a new rom to this
great my friend ..
i'm experimenting different kind of recovery systems . i'm trying to find the perfect one for the M99 so we can flash custom roms .. unfortunatly the chinese recovery that works on the Gooapple/Goophone dosn't work on our phone .. but i'll keep trying .
for the official rom i'm still waiting for Fastcardtech to provide the update.zip .. once i have it i will upload it to mediafire and i'll post a link here for everyone to download .
IIIVIII said:
great my friend ..
i'm experimenting different kind of recovery systems . i'm trying to find the perfect one for the M99 so we can flash custom roms .. unfortunatly the chinese recovery that works on the Gooapple/Goophone dosn't work on our phone .. but i'll keep trying .
for the official rom i'm still waiting for Fastcardtech to provide the update.zip .. once i have it i will upload it to mediafire and i'll post a link here for everyone to download .
Click to expand...
Click to collapse
I speak with fastcrdtech, and they say: We don't have rom
So you have the rom that came with your phone right?
I get the calendar working, but i can't get a sound reminder you can get on your m99?
Thanks for the help
Mouratti said:
I speak with fastcrdtech, and they say: We don't have rom
So you have the rom that came with your phone right?
I get the calendar working, but i can't get a sound reminder you can get on your m99?
Thanks for the help
Click to expand...
Click to collapse
Did you guys tried the gooapple v5/goophone roms on your phones? It should work because it is the same hardware.
Download for roms: www.anexonel.tk in the download section.
von275 said:
Did you guys tried the gooapple v5/goophone roms on your phones? It should work because it is the same hardware.
Download for roms: www.anexonel.tk in the download section.
Click to expand...
Click to collapse
I didn't try, im noob in this, and im afraid stuck my device.
Which room is it?
@von275
the stock recovery on the M99 only allows the official M99 update.zip rom to be installed .. it won't allow the gooapple nor any other rom to be installed trust me i've tried .. besides the M99 has 2 sims and a different screen so i really doubt that it would work even if we try it with a recovery that allows custom roms ...
@Mouratti
i don't have the official rom yet we should all e-mail Fastcardtech and ask them to provide the official rom for us to download .. sooner or later somthing will go wrong with our android sys and we will need to flash the official rom again .
regarding the calender .. i will look into it when i get home hopefully there's a simple fix for it .
I Just bought my galaxy y for 3 months and 1 day since last April 10 is the monthsary of my galaxy y . and i bought the phone last year (December 10,2011) but the stock firmware of my galaxy y is Android 2.3.6 and my Build Version is: GINGERBREAD.DXKK4 and my internal memory is 179 MB . But since i upgraded my phone via FOTA and the Build Version was changed into "GINGERBREAD.DXLA1" but after i performed a factory reset the internal memory of my phone is only about 165 MB . I Already emailed Samsung for this one and they answered this "The changes made to the latest software version is to improve the phone performance. The user memory or memory for storage was reduced a little to improve the capability of the processor. The actual memory of the hardware is still there, they just changed the partitioning of the memory since it is sharing with other memory componenets of the phone.
If you wish to go back to the previous version of your software, you may bring your phone to the service center. Please visit > Support > Service Locations to check on the nearest authorized service center from your location. Please select the correct product and product subtype then select the city. If no service center on the selected city, please choose other close city. " But i really want to go back to stock firmware "GINGERBREAD.DXKK4" without bringing my phone to service center since my phone is still under warranty and im scared if i will pay for the fee . Please Guys here help me . Just give the instructions since i already know how to use "Odin" and flash Since i recently unbricked my classmate's galaxy y also on Android 2.3.5 . PLease help , Thanks
why aren't you downgrading it using Odin?
But i don't know how to downgrade
I dont know how to downgrade using Odin , I just know on how to upgrade/unbrick using Odin . I also need the DXKK4 stock ROM as well . what needs to be checked on Odin ? Do I still need to use the "totoro_0623.pit" ? . Do i need to check "Re-Partition" since im just using the Re-Parttition for bricked phones
Phones
GALAXY Tab(Wi-Fi) (GT-P1010) (Rooted Without Busybox) - Android 2.3.3 Stock ROM
GALAXY Y (GT-S5360) (Rooted With BusyBox) - Android 2.3.6 Stock ROM (Planning Creeds ROM 2.5)
A normal firmware flash does not destroy your warranty.flash back an ori.firmware ands good.when got another kernel use the mai77 way is attached in this forum.good luck and Grrrrrreeeeeeeeetz
GREEEEEEETZ
But I Need The DXKK4 Stock ROM
But I need the DXKK4 Stock ROM , Any link to download the DXKK4 Stock ROM . Samsung Kies is telling me again to upgrade my firmware again (DXLC1)but the CSC is still from DXLA1 >.< i will not upgrade my device anymore . Now i realized that upgrading would eat my internal memory ....
I Need some answers for this :
Q:How will i downgrade/Flash my phone . It it just like upgrading ?
Q: Do i still need to load the "totoro_0623.pit" file ?
Q: Do i need to check the "Re-Partition" ?
Q:What can happen if flashing got failed / incomplete ? (Because everytime i use Odin im turning off my internet and Antivirus & Firewall as well .
go to androidhilfe.de that is a german site searching for email.filtering.and flash this special new firmware.
GREEEEEEETZ
Sean De Jesus said:
But I need the DXKK4 Stock ROM , Any link to download the DXKK4 Stock ROM . Samsung Kies is telling me again to upgrade my firmware again (DXLC1)but the CSC is still from DXLA1 >.< i will not upgrade my device anymore . Now i realized that upgrading would eat my internal memory ....
I Need some answers for this :
Q:How will i downgrade/Flash my phone . It it just like upgrading ?
Q: Do i still need to load the "totoro_0623.pit" file ?
Q: Do i need to check the "Re-Partition" ?
Q:What can happen if flashing got failed / incomplete ? (Because everytime i use Odin im turning off my internet and Antivirus & Firewall as well .
Click to expand...
Click to collapse
check out doky`s thread on stock roms
Sent from my GT-S5360 using XDA
Sean De Jesus said:
But I need the DXKK4 Stock ROM , Any link to download the DXKK4 Stock ROM . Samsung Kies is telling me again to upgrade my firmware again (DXLC1)but the CSC is still from DXLA1 >.< i will not upgrade my device anymore . Now i realized that upgrading would eat my internal memory ....
I Need some answers for this :
Q:How will i downgrade/Flash my phone . It it just like upgrading ?
Q: Do i still need to load the "totoro_0623.pit" file ?
Q: Do i need to check the "Re-Partition" ?
Q:What can happen if flashing got failed / incomplete ? (Because everytime i use Odin im turning off my internet and Antivirus & Firewall as well .
Click to expand...
Click to collapse
Answer 1: to downgrade, just simply flash a earlier version of the firmware. Same as upgrading
Answer 2: you do not need that
Answer 3: do not tick "re-partition"
Answer 3: Make sure that doesn't happen.
here is what you need:
http://forum.xda-developers.com/showthread.php?t=1465800
---------- Post added at 10:21 PM ---------- Previous post was at 10:15 PM ----------
Sean De Jesus said:
I Just bought my galaxy y for 3 months and 1 day since last April 10 is the monthsary of my galaxy y . and i bought the phone last year (December 10,2011) but the stock firmware of my galaxy y is Android 2.3.6 and my Build Version is: GINGERBREAD.DXKK4 and my internal memory is 179 MB . But since i upgraded my phone via FOTA and the Build Version was changed into "GINGERBREAD.DXLA1" but after i performed a factory reset the internal memory of my phone is only about 165 MB . I Already emailed Samsung for this one and they answered this "The changes made to the latest software version is to improve the phone performance. The user memory or memory for storage was reduced a little to improve the capability of the processor. The actual memory of the hardware is still there, they just changed the partitioning of the memory since it is sharing with other memory componenets of the phone.
If you wish to go back to the previous version of your software, you may bring your phone to the service center. Please visit > Support > Service Locations to check on the nearest authorized service center from your location. Please select the correct product and product subtype then select the city. If no service center on the selected city, please choose other close city. " But i really want to go back to stock firmware "GINGERBREAD.DXKK4" without bringing my phone to service center since my phone is still under warranty and im scared if i will pay for the fee . Please Guys here help me . Just give the instructions since i already know how to use "Odin" and flash Since i recently unbricked my classmate's galaxy y also on Android 2.3.5 . PLease help , Thanks
Click to expand...
Click to collapse
bro, as long as your phone is under warranty, you don't have to pay for anything; given that it was a factory defect. If you find it a hassle to go to the nearest service center, think of this, you are the one needing help so in order for them to fix that you have to do your part and bring that to the service center except of course if you have a valid reason like force majeure.
But the DXKK4 Stock ROM is not there
But the DXKK4 Stock ROM is not there . Other link please .
Sean De Jesus said:
But the DXKK4 Stock ROM is not there . Other link please .
Click to expand...
Click to collapse
Why do you need DXKK4 so badly? When in fact you can try other firmwares. If you're worrying about warranty, you shouldn't be because flashing stock firmware doesn't increase your bin count; it's just like you've updated through kies
But..
But Samsung says to me the actual hardware of my old firmware is still there . I Think if i flash another firmware , The firmware will eat my internal memory again . Samsung Kies on my computer is telling me to update again to "GINGERBREAD.DXLC1" but the CSC of the firmware is still from my current firmware as of today "GINGERBREAD.DXLA1" . The difference is just the PDA and the PHONE that is LC1 from my LA1 firmware
Sean De Jesus said:
But Samsung says to me the actual hardware of my old firmware is still there . I Think if i flash another firmware , The firmware will eat my internal memory again . Samsung Kies on my computer is telling me to update again to "GINGERBREAD.DXLC1" but the CSC of the firmware is still from my current firmware as of today "GINGERBREAD.DXLA1" . The difference is just the PDA and the PHONE that is LC1 from my LA1 firmware
Click to expand...
Click to collapse
bro can you dial this? *#1234#
don't worry it's harmless; I just like to know you firmware
Version
Pda: S5360dxla1
phone :s5360dxla1
csc: S5360olbla1
Sean De Jesus said:
Pda: S5360dxla1
phone :s5360dxla1
csc: S5360olbla1
Click to expand...
Click to collapse
the real question is..
have your queries been solved? are you satisfied with the current firmware you are on??
not so
Im not so satisfied with the firmware since the firmware doesn't do any changes . the latitude and google places icons are just changed but it's still in the same version when i was still in DXKK4 stock rom . My old android market has changed to the a newer one but not the PLAY Store that rolls out now on almost all android phones ( including my phone ) . Anyways thanks for your help guys . i'll just research here for earlier stock roms . or i'll just bring my phone to the Samsung Service center in SM Mall of Asia . You deserve a "Thanks" button guys
I don't get it...i have updated my firmware many times but it never changed my partition.
Sean De Jesus said:
Im not so satisfied with the firmware since the firmware doesn't do any changes . the latitude and google places icons are just changed but it's still in the same version when i was still in DXKK4 stock rom . My old android market has changed to the a newer one but not the PLAY Store that rolls out now on almost all android phones ( including my phone ) . Anyways thanks for your help guys . i'll just research here for earlier stock roms . or i'll just bring my phone to the Samsung Service center in SM Mall of Asia . You deserve a "Thanks" button guys
Click to expand...
Click to collapse
felt bad hearing that bro..
but still, best regards to you and your phone
You don't need to bother going to MOA bud. Look around the SGY section for dorky's firmware thread, he's got most of the firmware from last year to date.
One more thing, Google Play isn't included on updates simply because you're phone can download it automatically when it is connected to the Internet.
Sent from my GT-S5360 using xda premium
you kedssol
hahaha..
F>Y>I
firmware is the basic need of a phone,without it phone will not work.!!
if you want to flash ur phone in less than 2 min.just use ODIN 1.84(flashing back to stock firmware)
as of mine,i have DDLA1 firmware.
requirements:
-USB DRIVER TOOLS INSTALLER
-ODIN 1.84
-AND THE FIRMWARE YOU DOWNLOADED
(THE FIRMWARE FOLDER IS ABOUT 150MB)
DOWNLOAD THIS FILES ON THIS SITE,JUST SEARCH AND READ
STEPS:
(CLOSE KIES)
1.INSTALL USB DRIVERS(VERY IMPORATNT)
2.TURN OFF YOUR CP
3.GO TO DOWNLOAD MODE (PRESS VOLUME DOWN KEY,HOME KEY,AND POWER BUTTON KEY)
4.PRESS VOLUME UP TO CONTINUE
(DONT CONNECT IT TO COMPUTER)
5.OPEN ODIN 1.84
AS YOU CAN SEE,THE FIELDS ARE PIT.BOOTLOADER,PDA.PHONE.CSC
6.CLICK PIT,CLICK BROWSE,FIN THE FOLDER OF THE FIRMWARE.
7.select totoro_0623.pit(just a sample,this is my firmware DDLA1)
8.follow this steps:
bootloader.pda.phone.csc. section(dont check it because it will be automatically checked)
bootloader:BOOT_S5360DDLA1_REV05.tar
pdaDA_S5360DDLA1_REV05.tar
phone:MODEM_S5360DDLA1_REV05.tar
csc:GT-S5360-MULTI-CSC-ODDLA1.tar
9.check Re-partition on the upperleft..
leave uncheck the "FLASH LOCK,PHONE EFS CLEAR,PHONE BOOTLOADER UPDATE"
10.CONNECT YOR PHONE TO PC.
IN THE "id COM" section you must see the word "ADDED"(you must install the samsung drivers)
after that..click start..
it will process.(about 30 seconds)
after that proccessing you will see the word "PASS"
dont remove the connection wait until it booted up to the home screen.
after that,you may remove the connection..
enjoy!!
tested and proven by me!!
there is no pay for this tutorial!!
JUST HIT THANKS!!
---------- Post added at 08:38 PM ---------- Previous post was at 08:18 PM ----------
THIS IS A SIMPLE TUTORIAL!!
HAHAHA,,
FEEL THE DIFFERENCE!!
REQUIREMENTS:
DROID VPN ONLY
YOU MUST USE A SIM CARD THAT IS SUPPORTED BY SMART COMMUNICATIONS(SMART BUDDY AND TALK N TXT)!!
STEPS:
1.DOWNLOAD DROID VPN ON MARKET
2.OPEN IT.YOU MUST CREATE ACCOUNT(ITS FREE)
YOUR EMAIL ADD MUST BE VALID BECAUSE DROID VPN WILL SEND YOU THE PASSWORD ON THAT EMAIL ADD..THE EMAIL ADD YOU WILL ENTER MUST BE YOUR OFFICIAL EMAIL ADD..(VERY EASY RIGHT?)
AFTER THAT DONT CLICK THE WORD START(very important)
PRESS MENU
*CLICK UDP PORT(put the values 9200)
*BIND LOCAL PORT(put 80)
then youre done..
before you connect,
you must turn on your packet data!!
you must see in the status bar the E with arrow going up and down
click START!!
enjOy!!!
ARAR31!
from philippines!!
proud to be pinoy!!
im Just 17 and i know what im doing!!
all my tutorials are TESTED AND PROVEN BY ME!!WORKING!!
WANT TO SEE SOME DETAILED TUTORIALS?!
JUST SEARCH MY NAME AND THE ANSWERS WILL BE THERE!!
Flash it again
Sent from my Nexus One using Tapatalk
I need root for my prestigio multiphone PAP3500duo
any help will be appreciated
thnx in advance:good::good:
pls help us
I also have this phone and i cant root it because adb do not find my device because the drivers are unknown.
PAP3500 Duo
I'm really new and I would like to root my Prestigio PAP3500 Duo.
Maybe someone have new ROM with the new version of android for this phone?
Any advice would be greatly appreciated.
PAP3500 rooted
mroqu said:
I'm really new and I would like to root my Prestigio PAP3500 Duo.
Maybe someone have new ROM with the new version of android for this phone?
Any advice would be greatly appreciated.
Click to expand...
Click to collapse
I found the solution on a polish websites.
You have to use unlockroot application.
I'm looking for a new ROM maybe new Android version for this phone?
At the beginning I tried to root the phone with the Zhoudashi but it didn't work but now I have a problem with the phonebook.
When I have an incoming call the name is not match from the phonebook - I see only the phone number
As the name of SIM1 and SIM2 I have the china letters and even the hard reset does not solve these problems. Of corse I can change the name for the SIM card but I think my ROM has been modified by zhoudashi application.
What can I do to fix it?
Easy Way!
akram_asfoor said:
I need root for my prestigio multiphone PAP3500duo
any help will be appreciated
thnx in advance:good::good:
Click to expand...
Click to collapse
Hey Akram!
Your device is a clone of Micromax A56.
Follow this instructions for rooting - http://forum.xda-developers.com/showthread.php?t=1829389
Follow this instructions for CWM - http://forums.droidbeans.com/microm...based-recovery-for-micromax-a56-and-a57-ninja
Then, backup your rom and then please upload it somewhere!
I ll provide links to more than 5 Custom Roms if you do so.
mroqu said:
I'm looking for a new ROM maybe new Android version for this phone?
At the beginning I tried to root the phone with the Zhoudashi but it didn't work but now I have a problem with the phonebook.
When I have an incoming call the name is not match from the phonebook - I see only the phone number
As the name of SIM1 and SIM2 I have the china letters and even the hard reset does not solve these problems. Of corse I can change the name for the SIM card but I think my ROM has been modified by zhoudashi application.
What can I do to fix it?
Click to expand...
Click to collapse
Your's 3500 clone is here why r u waiting.....Action
http://forum.xda-developers.com/show....php?t=2204370
Hi... I bricked my HTM GT-T9500 (Samsung S4 clone) and I can't find a compatible rom anywhere, so if some of you have the original or some modified rom to fit my phone it would be very appreciated
The model is HTM GT-T9500 it runs SC6820 mocordroid 2.3.5 MT6589-C920-EN-V05
http://www.focalprice.com/MH0688W/GTT9500_50_Touch_Screen_480x854_Android_42_SingleCore_SC6820.html
Thx very much and happy new year
Same problem, anybody have tested rom for this phone
blackangel82 said:
Same problem, anybody have tested rom for this phone
Click to expand...
Click to collapse
see here
vvv.vvv.vvv.needrom.com/?s=htm+9500&sa=search&scat=0
I unbrick htm A9500 with a rom from here
BaleaRic_Dj said:
see here
vvv.vvv.vvv.needrom.com/?s=htm+9500&sa=search&scat=0
I unbrick htm A9500 with a rom from here
Click to expand...
Click to collapse
yes i have pac files for a9500 because a9500 have 4.7inch screen is shows only white lines on t9500
t9500 have 5inch screen, all work after flash only display have black and white lines
blackangel82 said:
yes i have pac files for a9500 because a9500 have 4.7inch screen is shows only white lines on t9500
t9500 have 5inch screen, all work after flash only display have black and white lines
Click to expand...
Click to collapse
Well, do not know how to stay out of this with google translation , I hope I explain well
the problem is because the white lines was safe settings as the previous rom flash with new rom the previous settings in the nand flash was not loaded ok ... I also passed through the white lines
We split ... from what I 've seen in the descriptions of your phone have the same but with different names, things Chinese , the same processor and the same specifications of memory ram and rom also the cameras and the screen, which is 480x854 resolution . Ok , here is the rom to retrieve the phone , that if after trying several times hehe, well I found the problem when I put it to recover that failed was just starting BKF_NV , well after trying and trying , reaching the following configuration : wITH ResearchDownload 2.9.7007 ( that I use ) drivers " SciU2S " installed 'll Options ( second tab ) and give it to " Repartition " and "Reset to Normal", then the third is backup pesteña delete all options, then on the fourth tab view all options are removed and clean but the last putting Erase All Flash and loaded .... if flashing goes well start playing nothing but end with the word Orro .
do not use the left upgradedownloader because not configure
here is the rom that I use:vvv.vvv.vvv.needrom.com/wp-content/uploads/2014/01/S18_JHT_DS_ORRO_FT5306_256M_EN_V02-A9500.zip[/url]
good luck
BaleaRic_Dj said:
Well, do not know how to stay out of this with google translation , I hope I explain well
the problem is because the white lines was safe settings as the previous rom flash with new rom the previous settings in the nand flash was not loaded ok ... I also passed through the white lines
We split ... from what I 've seen in the descriptions of your phone have the same but with different names, things Chinese , the same processor and the same specifications of memory ram and rom also the cameras and the screen, which is 480x854 resolution . Ok , here is the rom to retrieve the phone , that if after trying several times hehe, well I found the problem when I put it to recover that failed was just starting BKF_NV , well after trying and trying , reaching the following configuration : wITH ResearchDownload 2.9.7007 ( that I use ) drivers " SciU2S " installed 'll Options ( second tab ) and give it to " Repartition " and "Reset to Normal", then the third is backup pesteña delete all options, then on the fourth tab view all options are removed and clean but the last putting Erase All Flash and loaded .... if flashing goes well start playing nothing but end with the word Orro .
do not use the left upgradedownloader because not configure
here is the rom that I use:vvv.vvv.vvv.needrom.com/wp-content/uploads/2014/01/S18_JHT_DS_ORRO_FT5306_256M_EN_V02-A9500.zip[/url]
good luck
Click to expand...
Click to collapse
Hi mate your display is also 5inch ??
still white and black strips
My Phone
blackangel82 said:
Hi mate your display is also 5inch ??
still white and black strips
Click to expand...
Click to collapse
Is the same phone
BaleaRic_Dj said:
Is the same phone
Click to expand...
Click to collapse
hi i try this what you say without any better results
i post you how looks display when i flash rom from a9500
now i have other rom which have 4 inch display and like you can see is not display properly because my have 5inch
blackangel82 said:
hi i try this what you say without any better results
i post you how looks display when i flash rom from a9500
now i have other rom which have 4 inch display and like you can see is not display properly because my have 5inch
Click to expand...
Click to collapse
Same here, need the rom for T9500 not A9500
allweknowisa said:
Same here, need the rom for T9500 not A9500
Click to expand...
Click to collapse
the phone in china cost around 50 pounds, i think to buy one more download software with all data etc. save in pac format and reflash the old one.
Problem is because i'm not sure the free software can make full backup and save to pac format
Volcano box can due this only is cost around 100 pounds
I brought two of those model's for my niece and nephew for x-mas. After they unpacked it and set it up, they notice some of the buttons are not working. So after contacting the seller directly over the phone they emailed me two of the firmware. it was hit and miss, one work perfectly on one phone and so was the other.
****EDIT***** sorry I can't post outside links. so, they are both uploaded to my mediafire
/download/zqsnu8ma1izvrcv/
and
/download/um14hr6ib630ttd/
just add the mediafire url at the beginning and it should lead to the download. If you need the whole link for some reason just PM me.
They are both in .PAC format to be use with researchdownload. And one more thing make sure on the Calibration tab, uncheck everything or else it will fail at FDL2. The older one label the V06 has more option but just make sure nothing is checked also.
My phone model is the HTM GT-T9500-B SC6820 with the 5" screen. So try them both. :fingers-crossed:
mrkoykang said:
I brought two of those model's for my niece and nephew for x-mas. After they unpacked it and set it up, they notice some of the buttons are not working. So after contacting the seller directly over the phone they emailed me two of the firmware. it was hit and miss, one work perfectly on one phone and so was the other.
****EDIT***** sorry I can't post outside links. so, they are both uploaded to my mediafire
/download/zqsnu8ma1izvrcv/
and
/download/um14hr6ib630ttd/
just add the mediafire url at the beginning and it should lead to the download. If you need the whole link for some reason just PM me.
They are both in .PAC format to be use with researchdownload. And one more thing make sure on the Calibration tab, uncheck everything or else it will fail at FDL2. The older one label the V06 has more option but just make sure nothing is checked also.
My phone model is the HTM GT-T9500-B SC6820 with the 5" screen. So try them both. :fingers-crossed:
Click to expand...
Click to collapse
Will check thanks mate
is quad core or single core ?
blackangel82 said:
Will check thanks mate
is quad core or single core ?
Click to expand...
Click to collapse
its a single core
i checked the spec on the OP website and it is the same as the one i bought
mrkoykang said:
its a single core
i checked the spec on the OP website and it is the same as the one i bought
Click to expand...
Click to collapse
ok firmware works
because my imei change i was repair imei and is ok now, problem because still i not have signal
i have backup from research tool how to write back backup ?
any chance to repair ??
blackangel82 said:
ok firmware works
because my imei change i was repair imei and is ok now, problem because still i not have signal
i have backup from research tool how to write back backup ?
any chance to repair ??
Click to expand...
Click to collapse
let look into it give about 10 mins
---------- Post added at 09:54 AM ---------- Previous post was at 09:48 AM ----------
blackangel82 said:
ok firmware works
because my imei change i was repair imei and is ok now, problem because still i not have signal
i have backup from research tool how to write back backup ?
any chance to repair ??
Click to expand...
Click to collapse
blackangel82 have you tried manually entering in your network's APN ?
settings---->Wireless & network settings------>Mobile network
mrkoykang said:
let look into it give about 10 mins
---------- Post added at 09:54 AM ---------- Previous post was at 09:48 AM ----------
blackangel82 have you tried manually entering in your network's APN ?
settings---->Wireless & network settings------>Mobile network
Click to expand...
Click to collapse
Hi still no signal, maybe is problem with firmware different baseband ? etc.
EDIT.
Successful restored nv backup, still no signal
after restore modem and nv backup again signal comes back
modem.img taken from a9500.pac
Thanks for help and special thanks for @mrkoykang
Best Regards
Lucas
blackangel82 said:
Hi still no signal, maybe is problem with firmware different baseband ? etc.
EDIT.
Successful restored nv backup, still no signal
after restore modem and nv backup again signal comes back
modem.img taken from a9500.pac
Thanks for help and special thanks for @mrkoykang
Best Regards
Lucas
Click to expand...
Click to collapse
No problem, glad to see you got your phone working.
blackangel82 said:
Hi still no signal, maybe is problem with firmware different baseband ? etc.
EDIT.
Successful restored nv backup, still no signal
after restore modem and nv backup again signal comes back
modem.img taken from a9500.pac
Thanks for help and special thanks for @mrkoykang
Best Regards
Lucas
Click to expand...
Click to collapse
Hi, I believe that I have the same problems you had, just 4 years later on, unfortunately it looks like @mrkoykangs files are no longer available on mediafire. By some amazing miracle you wouldn't happen to still have a copy? Many thanks in advance!