Hi... I bricked my HTM GT-T9500 (Samsung S4 clone) and I can't find a compatible rom anywhere, so if some of you have the original or some modified rom to fit my phone it would be very appreciated
The model is HTM GT-T9500 it runs SC6820 mocordroid 2.3.5 MT6589-C920-EN-V05
http://www.focalprice.com/MH0688W/GTT9500_50_Touch_Screen_480x854_Android_42_SingleCore_SC6820.html
Thx very much and happy new year
Same problem, anybody have tested rom for this phone
blackangel82 said:
Same problem, anybody have tested rom for this phone
Click to expand...
Click to collapse
see here
vvv.vvv.vvv.needrom.com/?s=htm+9500&sa=search&scat=0
I unbrick htm A9500 with a rom from here
BaleaRic_Dj said:
see here
vvv.vvv.vvv.needrom.com/?s=htm+9500&sa=search&scat=0
I unbrick htm A9500 with a rom from here
Click to expand...
Click to collapse
yes i have pac files for a9500 because a9500 have 4.7inch screen is shows only white lines on t9500
t9500 have 5inch screen, all work after flash only display have black and white lines
blackangel82 said:
yes i have pac files for a9500 because a9500 have 4.7inch screen is shows only white lines on t9500
t9500 have 5inch screen, all work after flash only display have black and white lines
Click to expand...
Click to collapse
Well, do not know how to stay out of this with google translation , I hope I explain well
the problem is because the white lines was safe settings as the previous rom flash with new rom the previous settings in the nand flash was not loaded ok ... I also passed through the white lines
We split ... from what I 've seen in the descriptions of your phone have the same but with different names, things Chinese , the same processor and the same specifications of memory ram and rom also the cameras and the screen, which is 480x854 resolution . Ok , here is the rom to retrieve the phone , that if after trying several times hehe, well I found the problem when I put it to recover that failed was just starting BKF_NV , well after trying and trying , reaching the following configuration : wITH ResearchDownload 2.9.7007 ( that I use ) drivers " SciU2S " installed 'll Options ( second tab ) and give it to " Repartition " and "Reset to Normal", then the third is backup pesteña delete all options, then on the fourth tab view all options are removed and clean but the last putting Erase All Flash and loaded .... if flashing goes well start playing nothing but end with the word Orro .
do not use the left upgradedownloader because not configure
here is the rom that I use:vvv.vvv.vvv.needrom.com/wp-content/uploads/2014/01/S18_JHT_DS_ORRO_FT5306_256M_EN_V02-A9500.zip[/url]
good luck
BaleaRic_Dj said:
Well, do not know how to stay out of this with google translation , I hope I explain well
the problem is because the white lines was safe settings as the previous rom flash with new rom the previous settings in the nand flash was not loaded ok ... I also passed through the white lines
We split ... from what I 've seen in the descriptions of your phone have the same but with different names, things Chinese , the same processor and the same specifications of memory ram and rom also the cameras and the screen, which is 480x854 resolution . Ok , here is the rom to retrieve the phone , that if after trying several times hehe, well I found the problem when I put it to recover that failed was just starting BKF_NV , well after trying and trying , reaching the following configuration : wITH ResearchDownload 2.9.7007 ( that I use ) drivers " SciU2S " installed 'll Options ( second tab ) and give it to " Repartition " and "Reset to Normal", then the third is backup pesteña delete all options, then on the fourth tab view all options are removed and clean but the last putting Erase All Flash and loaded .... if flashing goes well start playing nothing but end with the word Orro .
do not use the left upgradedownloader because not configure
here is the rom that I use:vvv.vvv.vvv.needrom.com/wp-content/uploads/2014/01/S18_JHT_DS_ORRO_FT5306_256M_EN_V02-A9500.zip[/url]
good luck
Click to expand...
Click to collapse
Hi mate your display is also 5inch ??
still white and black strips
My Phone
blackangel82 said:
Hi mate your display is also 5inch ??
still white and black strips
Click to expand...
Click to collapse
Is the same phone
BaleaRic_Dj said:
Is the same phone
Click to expand...
Click to collapse
hi i try this what you say without any better results
i post you how looks display when i flash rom from a9500
now i have other rom which have 4 inch display and like you can see is not display properly because my have 5inch
blackangel82 said:
hi i try this what you say without any better results
i post you how looks display when i flash rom from a9500
now i have other rom which have 4 inch display and like you can see is not display properly because my have 5inch
Click to expand...
Click to collapse
Same here, need the rom for T9500 not A9500
allweknowisa said:
Same here, need the rom for T9500 not A9500
Click to expand...
Click to collapse
the phone in china cost around 50 pounds, i think to buy one more download software with all data etc. save in pac format and reflash the old one.
Problem is because i'm not sure the free software can make full backup and save to pac format
Volcano box can due this only is cost around 100 pounds
I brought two of those model's for my niece and nephew for x-mas. After they unpacked it and set it up, they notice some of the buttons are not working. So after contacting the seller directly over the phone they emailed me two of the firmware. it was hit and miss, one work perfectly on one phone and so was the other.
****EDIT***** sorry I can't post outside links. so, they are both uploaded to my mediafire
/download/zqsnu8ma1izvrcv/
and
/download/um14hr6ib630ttd/
just add the mediafire url at the beginning and it should lead to the download. If you need the whole link for some reason just PM me.
They are both in .PAC format to be use with researchdownload. And one more thing make sure on the Calibration tab, uncheck everything or else it will fail at FDL2. The older one label the V06 has more option but just make sure nothing is checked also.
My phone model is the HTM GT-T9500-B SC6820 with the 5" screen. So try them both. :fingers-crossed:
mrkoykang said:
I brought two of those model's for my niece and nephew for x-mas. After they unpacked it and set it up, they notice some of the buttons are not working. So after contacting the seller directly over the phone they emailed me two of the firmware. it was hit and miss, one work perfectly on one phone and so was the other.
****EDIT***** sorry I can't post outside links. so, they are both uploaded to my mediafire
/download/zqsnu8ma1izvrcv/
and
/download/um14hr6ib630ttd/
just add the mediafire url at the beginning and it should lead to the download. If you need the whole link for some reason just PM me.
They are both in .PAC format to be use with researchdownload. And one more thing make sure on the Calibration tab, uncheck everything or else it will fail at FDL2. The older one label the V06 has more option but just make sure nothing is checked also.
My phone model is the HTM GT-T9500-B SC6820 with the 5" screen. So try them both. :fingers-crossed:
Click to expand...
Click to collapse
Will check thanks mate
is quad core or single core ?
blackangel82 said:
Will check thanks mate
is quad core or single core ?
Click to expand...
Click to collapse
its a single core
i checked the spec on the OP website and it is the same as the one i bought
mrkoykang said:
its a single core
i checked the spec on the OP website and it is the same as the one i bought
Click to expand...
Click to collapse
ok firmware works
because my imei change i was repair imei and is ok now, problem because still i not have signal
i have backup from research tool how to write back backup ?
any chance to repair ??
blackangel82 said:
ok firmware works
because my imei change i was repair imei and is ok now, problem because still i not have signal
i have backup from research tool how to write back backup ?
any chance to repair ??
Click to expand...
Click to collapse
let look into it give about 10 mins
---------- Post added at 09:54 AM ---------- Previous post was at 09:48 AM ----------
blackangel82 said:
ok firmware works
because my imei change i was repair imei and is ok now, problem because still i not have signal
i have backup from research tool how to write back backup ?
any chance to repair ??
Click to expand...
Click to collapse
blackangel82 have you tried manually entering in your network's APN ?
settings---->Wireless & network settings------>Mobile network
mrkoykang said:
let look into it give about 10 mins
---------- Post added at 09:54 AM ---------- Previous post was at 09:48 AM ----------
blackangel82 have you tried manually entering in your network's APN ?
settings---->Wireless & network settings------>Mobile network
Click to expand...
Click to collapse
Hi still no signal, maybe is problem with firmware different baseband ? etc.
EDIT.
Successful restored nv backup, still no signal
after restore modem and nv backup again signal comes back
modem.img taken from a9500.pac
Thanks for help and special thanks for @mrkoykang
Best Regards
Lucas
blackangel82 said:
Hi still no signal, maybe is problem with firmware different baseband ? etc.
EDIT.
Successful restored nv backup, still no signal
after restore modem and nv backup again signal comes back
modem.img taken from a9500.pac
Thanks for help and special thanks for @mrkoykang
Best Regards
Lucas
Click to expand...
Click to collapse
No problem, glad to see you got your phone working.
blackangel82 said:
Hi still no signal, maybe is problem with firmware different baseband ? etc.
EDIT.
Successful restored nv backup, still no signal
after restore modem and nv backup again signal comes back
modem.img taken from a9500.pac
Thanks for help and special thanks for @mrkoykang
Best Regards
Lucas
Click to expand...
Click to collapse
Hi, I believe that I have the same problems you had, just 4 years later on, unfortunately it looks like @mrkoykangs files are no longer available on mediafire. By some amazing miracle you wouldn't happen to still have a copy? Many thanks in advance!
Related
I just tried flashing the CT beta 4 full version rom on my device.. The flash went perfectly fine.. But after that when the device is booting up for the first time.. It gets stuck at the cuztomization screen !!!.. Specifically while loading the oper application files.. So i removed the battery and restarted the device... It turns out that everythin is fine.. JUST THE OPERA AND TF3D applications are missing from the device !!!... Any body got any suggestions or ideas... to get it sorted out ?!?!... please help !!!
Okhay the same thing happened with the following roms
1) tlr-diamond-3.08.07.16
2) OFFICIAL Hong kong 1.93.831.1 WWE ROM
3) OFFICIAL UK 1.93 ROM
Cookers please note !!!
You have to wait. It DOES take some time, since it's installing Opera.
It SHOULD finish AT MOST after 5-10 minutes.
adwinp said:
You have to wait. It DOES take some time, since it's installing Opera.
It SHOULD finish AT MOST after 5-10 minutes.
Click to expand...
Click to collapse
I tried it mate !!!
I waited for more than like half an hour... But the screen was still stuck !!
any idea.. what could be the issue ?!?!
facing the same issue , device hanging at customization screen , loading opera
Manoj0603 said:
facing the same issue , device hanging at customization screen , loading opera
Click to expand...
Click to collapse
Dude.. I think the problem is with the opera cab file.. Am tryin to replace it with the another one from the ROM.. let me see how it goes !!
Try removing the opera from customization altogether.
adwinp said:
Try removing the opera from customization altogether.
Click to expand...
Click to collapse
Yup Im plannin to do that itself.. I have gone thru the thread which is tutorial on cooking rom.. tryin to put it to use... wanted to ask you one thing.. I have another opera cab file which installs on my device properly.. Shall i replace this cab file with the one which is present in the OEM package of the rom !?!?.. I mean just a simple relacement would be enough or should i do somethin more after tat !?!?
Manoj0603 said:
facing the same issue , device hanging at customization screen , loading opera
Click to expand...
Click to collapse
WOHOOOO !!!
Yes it worked.. Have got the problem rectified !!!
How did you do that , can you share the steps....
Manoj0603 said:
How did you do that , can you share the steps....
Click to expand...
Click to collapse
I just changed the opera cab file from the ROM.. there seems to be a problem with the one which that comes with the ROM.. I replaced it with the one that works.. I'll be putting up the this new ROM a lil later.. Just download and Flash that one.. Am sure you wont have the same problem.. Cheers !!
Be sure to PM the author of the "problematic" ROM so he can fix the problem.
If it's the CT ROM, check if this problem happens with the newer version too.
adwinp said:
Be sure to PM the author of the "problematic" ROM so he can fix the problem.
If it's the CT ROM, check if this problem happens with the newer version too.
Click to expand...
Click to collapse
Yes Sir !!.. Will do that... But i dont think evrybody is facin the issue.. Seems like only ppl usin the indian device have this problem.. But will let the authors know of it in any case..
@ Manoj0603...
Here is the link my friend.. Download.. Flash.. And Enjoy..
I have added the call history tab in TF3D.. Lemme knw.. How it goes..
( Have not tried this latest one, with call history tab.. But am sure it will work.. :-D..)
HTC DIAMOND OFFICIAL 1.93 UK ROM (OPERA FIXED & CALL HISTORY TAB)
Dpakrawal said:
@ Manoj0603...
Here is the link my friend.. Download.. Flash.. And Enjoy..
I have added the call history tab in TF3D.. Lemme knw.. How it goes..
( Have not tried this latest one, with call history tab.. But am sure it will work.. :-D..)
HTC DIAMOND OFFICIAL 1.93 UK ROM (OPERA FIXED & CALL HISTORY TAB)
Click to expand...
Click to collapse
Ok, I got the exact same problem with my Diamond. It freezes on the first boot up specifically on the Opera files. I have waited for about 1 hour and nothing...
Did anyone else try this modified ROM and was successfull at it? Dpakrawal is yours still working just fine? Any complaints about it?
Thanks a lot for the help guys.
Laelk said:
Ok, I got the exact same problem with my Diamond. It freezes on the first boot up specifically on the Opera files. I have waited for about 1 hour and nothing...
Did anyone else try this modified ROM and was successfull at it? Dpakrawal is yours still working just fine? Any complaints about it?
Thanks a lot for the help guys.
Click to expand...
Click to collapse
Yes it is working absolutely fine.. Are you havin troubles with this ROM (the one i posted above) ??.. or are you having trouble with the other stock roms ?!?!
First of all, thanks a lot for replying so quickly!!
As you can imagine, its killing me having this amazing phone in my hands and not being able to use it! :-(
Your ROM is fine, I tested it yesterday and it works. It went past the Opera issue and the installation and customization were ok.
The problem is: It doesn´t work for me. I am in Brazil and I need a ROM that turns my phone into Quadband and lets it have the 850mHZ band too.
Anyone have any idea where I can find a ROM like that? I know that the original 1.93 HK ROM has Brazil on the list. After the freezing on Opera, I would reset the Phone and it would get to windows (no 3D Touch though). In there, I could go into connection options and see both the 850mHZ band and the settings for all the phone operators in Brazil: Claro, TIM, Oi, Vivo (Vivo is the one I use, and apparently the only one this phone has issues with on the original ROM).
Is it possible to re-cook the ROM you posted with the settings for Brazil?
Thanks a lot Dpakrawal. You´ve been an amazing help.
Laelk said:
First of all, thanks a lot for replying so quickly!!
As you can imagine, its killing me having this amazing phone in my hands and not being able to use it! :-(
Your ROM is fine, I tested it yesterday and it works. It went past the Opera issue and the installation and customization were ok.
The problem is: It doesn´t work for me. I am in Brazil and I need a ROM that turns my phone into Quadband and lets it have the 850mHZ band too.
Anyone have any idea where I can find a ROM like that? I know that the original 1.93 HK ROM has Brazil on the list. After the freezing on Opera, I would reset the Phone and it would get to windows (no 3D Touch though). In there, I could go into connection options and see both the 850mHZ band and the settings for all the phone operators in Brazil: Claro, TIM, Oi, Vivo (Vivo is the one I use, and apparently the only one this phone has issues with on the original ROM).
Is it possible to re-cook the ROM you posted with the settings for Brazil?
Thanks a lot Dpakrawal. You´ve been an amazing help.
Click to expand...
Click to collapse
My pleasure dude.. It is actually not that big of a deal.. Just been learnin new things and been tryin to use it..
Anyways.. Re-cooking the modified rom for brazil settings huh !!
Well honestly i really dont know how to do it.. So dont think that would be possible.. But dont worry.. I could probably fix the OPERA issue with some other 1.93 base rom which holds good for brazil.. As you've said, the HK ROM has the brazil settings.. I shall fix the issue in that and hopefully that solves your problem !!
Give me like a day or two.. shall post it up for you asap.. And as a special treat.. Shall add any apps you would like to come with the cooked ROM.. :-D..
(Will be adding the CALL HISTORY TAB.. Lemme me knw if there is anythin else you would like to be added.. if you could post the link to download those apps.. It would make it a lil easier for me..)
Dude, I don't even know how to thank you enough.
If you can fix the issue with the Customization on the HK ROM, my guess is it would work just fine.
As for the addons, I don´t know that many of them. Can you name a couple that you think might be cool to have and I´ll take a look into them and tell which ones I like? I hope its not too much trouble, if it is, don´t worry about it, I can get the programs later.
If you have any trouble getting any of them into the ROM, don't worry about it. I can always get them later on, download and install them into my Diamond right?
Thanks a lot again!
Change of events.
I just found out that my Diamond is the Indian Edge DIAM140 version.
I have no idea if that makes any difference regarding the ROM or not.
I hear that the DIAM140 version is 2G only. Doesn´t support 3G.
Do you think this might be why it hasn´t been working?
I'm getting worried... :-(
Thanks a lot for the help!
So I recently bought the m99 from fastcardtech, and rooted it easily with SuperOneClick. I am unable however to install ClockworkMod in any way or form on the device. It identifies itself as a G2x in the model, uses a MTK 6573 processor.
Anyone else have this phone and figure out a way, I'm completely lost and have search for a good week now trying to figure out a way to get ClockWorkMod on this thing.
(also I'm not sure if this is the correct forum to post this in, since there is no forum for my phone model).
Hi There ,
would you please tell me where can i download the original ROM or a full backup for this phone .. i got this phone yesterday and i managed to root it and delete all the chinese apps .
Thanks
Hello
I have one of this this.
And i like to root and first backup the room original one, how can i do that?
For root z4root works or not?
How can i install the market anyone know?
Thanks
---------- Post added at 04:31 PM ---------- Previous post was at 04:24 PM ----------
CustomKal said:
So I recently bought the m99 from fastcardtech, and rooted it easily with SuperOneClick. I am unable however to install ClockworkMod in any way or form on the device. It identifies itself as a G2x in the model, uses a MTK 6573 processor.
Anyone else have this phone and figure out a way, I'm completely lost and have search for a good week now trying to figure out a way to get ClockWorkMod on this thing.
(also I'm not sure if this is the correct forum to post this in, since there is no forum for my phone model).
Click to expand...
Click to collapse
Hello
You have the M99 with Ui iphone?
Did you have the room original? Was nice we get this room available, before try the OC and new rooms.
Any bugs find yet?
Thanks
help me too.. is this a bug?
Did you have the market worked on your phone?
My version is 2.3.6 from android, but the markets i install open, then when i try to download some app they market (process com.vending.android) has stopped unexpectedly
You have this problem to?
Guys ..
To root this phone you have 2 options :
1- SuperOneClick 2.3.3
2- The Chinese root
both are listed at a thread called (Gooapple v5 issues) on this fourm . you also need to install the the drivers for this phone which btw are the same drivers for the GooApple v5 , cuz both phones use the MTK6573 .
for the market problem .. try to install an older market ver.
now I have the phone , but unfortunately things went south couple days ago when i installed some fonts from the android market and forgot to change the permissions . the phone now is stuck at start up logo ,, i tried the wipe and restore to factory options but nothing worked .. the only way i can get it to work is to flash it with the original rom again .i've contacted Fastcardtech to get the update.zip rom for the M99 Google 4s+ , but i haven't heard from them .
so if you have the update.zip rom for M99 Google 4s+ please post a link so i can download it ..
Thanks
Thanks for reply!
Wich market version you use?
Your M99 was from fastcardtech? android 2.3.6?
Well i can help you but im noob in android, how can i get this zip file, or maybe make a "image" of this rom phone like they came to send to you (if this is possible)
Thanks
Mouratti said:
Thanks for reply!
Wich market version you use?
Your M99 was from fastcardtech? android 2.3.6?
Well i can help you but im noob in android, how can i get this zip file, or maybe make a "image" of this rom phone like they came to send to you (if this is possible)
Thanks
Click to expand...
Click to collapse
i truly appreciate you trying to help
i'm looking for both now (rom and a reliable recovery) that can actually work on our phones
i've been looking through the chinese forums in the last couple days , but still no luck .. the problem is the name M99 dosn't exist in thier forums they only have the old ver M98 .. so our phone must have a different name other than M99 ...
i can't really remember which market ver worked , i've tried alot of versions but i'm sure the one that worked was one of the old vers . i wish my phone was working so i can help ya there .
yes i got it from fastcardtech and it has the 2.3.6 with UI rom .
i'll keep looking and i will let you know .
Thanks
Did you try the cyanongean??
How can i help you with the rom??
Did you try root your phone and install any rom?
If you know how can i do to save this rom and send to you it's ok i try.
For the market i used other one apdroid i guess the name and works
How do you enter on recovery wipe?? What you install to get the phone stuck!?
Thanks
IIIVIII said:
i truly appreciate you trying to help
i'm looking for both now (rom and a reliable recovery) that can actually work on our phones
i've been looking through the chinese forums in the last couple days , but still no luck .. the problem is the name M99 dosn't exist in thier forums they only have the old ver M98 .. so our phone must have a different name other than M99 ...
i can't really remember which market ver worked , i've tried alot of versions but i'm sure the one that worked was one of the old vers . i wish my phone was working so i can help ya there .
yes i got it from fastcardtech and it has the 2.3.6 with UI rom .
i'll keep looking and i will let you know .
Thanks
Click to expand...
Click to collapse
Hi guys, I am from the thread "Gooapple v5 issues" I could maybe help you as it is almost the same device.
@IIIVIII What happened to your phone?
Great News ..
i finally gained access to my phone's root while looping through Android Commander and i've managed to reset the permissions to the fonts and now the phone is alive and kicking
@ von275 & Mouratti .. Thank you guys for offering to help i really appreciate it .
here's how to get any Androidmarket ver working on the M99 :
1- root your phone.
2- install root explorer (attached)
3- copy the attached file (Vending) to your phone's root (system/app) and make sure u set the permissions as follows:
Owner: Read /Write
Group: Read
Others: Read
To make Google sync work for contacts do the same as the above steps for these attached files :
1-GoogleCalendarSyncAdapter
2-GoogleContactsSyncAdapter
btw. with root explorer you can remove all the unwanted chinese apps like youku etc. from your root (system/app) just don't go wild ..
i'll be coming back later on with more tweaks ..
IIIVIII said:
Great News ..
i finally gained access to my phone's root while looping through Android Commander and i've managed to reset the permissions to the fonts and now the phone is alive and kicking
@ von275 & Mouratti .. Thank you guys for offering to help i really appreciate it .
here's how to get any Androidmarket ver working on the M99 :
1- root your phone.
2- install root explorer (attached)
3- copy the attached file (Vending) to your phone's root (system/app) and make sure u set the permissions as follows:
Owner: Read /Write
Group: Read
Others: Read
To make Google sync work for contacts do the same as the above steps for these attached files :
1-GoogleCalendarSyncAdapter
2-GoogleContactsSyncAdapter
btw. with root explorer you can remove all the unwanted chinese apps like youku etc. from your root (system/app) just don't go wild ..
i'll be coming back later on with more tweaks ..
Click to expand...
Click to collapse
Great news
Nice one i will try this, did you have a new rom for this phone?
Wich one?
I saw a bug i guess i can put any reminder with a beep sound on my phone, its normal?
Thanks
Mouratti said:
Great news
Nice one i will try this, did you have a new rom for this phone?
Wich one?
I saw a bug i guess i can put any reminder with a beep sound on my phone, its normal?
Thanks
Click to expand...
Click to collapse
Hello Guys
I make a mistake and i delete the keyboard how can i put the keyboard again? Can i install on in market or doing what?
I install a few one but doesn't appear
PS: Now i get it
@Mouratti
try a keyboard called (ITap) or (anysoftkeyboard) both can be found on androidmarket .. get rid of the chinese keyboard these 2 are alot better . plus ITap has IPhone layout so u wont miss the old keyboard
no i heaven't heard from Fastcardtech ..so no new rom
i fixd the phone while running loop on the original rom .
Mouratti said:
Hello Guys
I make a mistake and i delete the keyboard how can i put the keyboard again? Can i install on in market or doing what?
I install a few one but doesn't appear
PS: Now i get it
Click to expand...
Click to collapse
I Have my market work and keyboard and calendar too
Thanks a lot !!
Now i just want a new rom to this
great my friend ..
i'm experimenting different kind of recovery systems . i'm trying to find the perfect one for the M99 so we can flash custom roms .. unfortunatly the chinese recovery that works on the Gooapple/Goophone dosn't work on our phone .. but i'll keep trying .
for the official rom i'm still waiting for Fastcardtech to provide the update.zip .. once i have it i will upload it to mediafire and i'll post a link here for everyone to download .
IIIVIII said:
great my friend ..
i'm experimenting different kind of recovery systems . i'm trying to find the perfect one for the M99 so we can flash custom roms .. unfortunatly the chinese recovery that works on the Gooapple/Goophone dosn't work on our phone .. but i'll keep trying .
for the official rom i'm still waiting for Fastcardtech to provide the update.zip .. once i have it i will upload it to mediafire and i'll post a link here for everyone to download .
Click to expand...
Click to collapse
I speak with fastcrdtech, and they say: We don't have rom
So you have the rom that came with your phone right?
I get the calendar working, but i can't get a sound reminder you can get on your m99?
Thanks for the help
Mouratti said:
I speak with fastcrdtech, and they say: We don't have rom
So you have the rom that came with your phone right?
I get the calendar working, but i can't get a sound reminder you can get on your m99?
Thanks for the help
Click to expand...
Click to collapse
Did you guys tried the gooapple v5/goophone roms on your phones? It should work because it is the same hardware.
Download for roms: www.anexonel.tk in the download section.
von275 said:
Did you guys tried the gooapple v5/goophone roms on your phones? It should work because it is the same hardware.
Download for roms: www.anexonel.tk in the download section.
Click to expand...
Click to collapse
I didn't try, im noob in this, and im afraid stuck my device.
Which room is it?
@von275
the stock recovery on the M99 only allows the official M99 update.zip rom to be installed .. it won't allow the gooapple nor any other rom to be installed trust me i've tried .. besides the M99 has 2 sims and a different screen so i really doubt that it would work even if we try it with a recovery that allows custom roms ...
@Mouratti
i don't have the official rom yet we should all e-mail Fastcardtech and ask them to provide the official rom for us to download .. sooner or later somthing will go wrong with our android sys and we will need to flash the official rom again .
regarding the calender .. i will look into it when i get home hopefully there's a simple fix for it .
Hello
After flashing ROM from here
SPH-D710_GB27_1014481_Rooted_Restore.tar.md5.gz
I forgot what the Phone EFS Clear checkbox did in Odin
Now
* factory mode is on !!!!
CHANNEL : 0
SIO MODE : 2
PDA : SPH-D710.GB27
Baseband Ver : S710.0.3S.GB27
HW : H710.0.3S.Q
* nv_data.bin is ma Missing
HC-KTool >> Check EFS Backup
/sdcard/efs.img fond
/!\ nv_data.bin NOT FOUND in backup !!!
/sdcard/efs.tar.gz fond
/!\ nv_data.bin NOT FOUND in backup !!!
* Status:
Network : Sprint
Service state : In service
Mobile network state : Disconnected
My phone number : 000-000-0016
MIN : 0000000016
MEID : DEs\17600000000 Hex\B0000000
Device status : Official
I tried all ways to change ENS number
In the latter has to be a file nv_data. Bin
It is the problem in the foundation
How To Change Your ESN Number , Repair Corrupt, Bad or Incorrect MEID/ESN Number , How to restore your MEID/ESN , [Guide] Samsung Android - Repair EFS / IMEI WITHOUT BOX , Editing your Product code
Also tried to flashing new Rom SPH-D710.EL29_CL852097 , D710_CODE_SPH-D710.FC24_CL287574_REV02_user_low_ship.tar.md5 , SPH-D710_SPR_D710USEG30
Please help me find a way to make new files to a folder EFS.
Forgive me you too long to detail
@Hani85
You might take a look at this.. http://forum.xda-developers.com/showthread.php?t=1264021 or [this... http://forum.xda-developers.com/showthread.php?t=1308546
Gil81 said:
@Hani85
You might take a look at this.. http://forum.xda-developers.com/showthread.php?t=1264021 or [this... http://forum.xda-developers.com/showthread.php?t=1308546
Click to expand...
Click to collapse
Thank you Gil81
This method did not work
Please help me to find a way to change ESN / MEID
+++++++++++++++++++
and
What is the best ROM to enable the use of International ( sim cdma card ) / or modem
See the picture
@Hani85
I'll keep looking for ya..
As for the best rom... I have no idea.. I will say this though. If you have the international model of the s2..Do Not Flash Any Roms from the epic 4g touch forum.. you will end up with a soft brick or worse a new shiny coaster.. If you get our bootloader stuck on that device.. chances are Odin nor anything else will recognize it and you will be stuck hoping a jtag can save ya...
There is a forum for that specific device..
EDIT.... I'm a retard... I see what you're asking now.. lol. I'm not sure as I'm a boost Customer but I would imagine that the tw based roms would be the better choice..
Gil81 said:
@Hani85
You might take a look at this.. http://forum.xda-developers.com/showthread.php?t=1264021 or [this... http://forum.xda-developers.com/showthread.php?t=1308546
Click to expand...
Click to collapse
Gil81 said:
@Hani85
I'll keep looking for ya..
As for the best rom... I have no idea.. I will say this though. If you have the international model of the s2..Do Not Flash Any Roms from the epic 4g touch forum.. you will end up with a soft brick or worse a new shiny coaster.. If you get our bootloader stuck on that device.. chances are Odin nor anything else will recognize it and you will be stuck hoping a jtag can save ya...
There is a forum for that specific device..
EDIT.... I'm a retard... I see what you're asking now.. lol. I'm not sure as I'm a boost Customer but I would imagine that the tw based roms would be the better choice..
Click to expand...
Click to collapse
Gil81 Thanks Thanks Thanks Thanks
I'm desperate
Where do I find tw based roms ؟
Hani85 said:
Gil81 Thanks Thanks Thanks Thanks
I'm desperate
Where do I find tw based roms ؟
Click to expand...
Click to collapse
They are the roms in the Android development section... almost all the roms are tw based in that forum section.. Although I did see a CM based rom in there a little while back... but in the roms op.. it will usually tell you that it's tw based..
---------- Post added at 03:21 PM ---------- Previous post was at 02:56 PM ----------
http://www.cdma-ware.com/workshop.html ... might be worth a look.. I believe that this is the only way to go about the changes you are wanting to make.. I read also that you might have to zero out the esn/meid number to then change it... not sure as I'm a super noob in this area.. @Hani85
Gil81
Did you mean, for example,
[ROM][OFFICIAL][CyanogenMod 10.2 Alpha4 for Exhilarate][TeamChopsticks]
++++++++++++++
I could not change the numbers esn / meid using CDMA Workshop
Details:
000000>send>SPC is correct. Phone unlocked
ESN >DEfault(nv_write)>phone ask for password . Internal security password (16 digits) is required
ESN >universal,EFS method>cannot read EFS
Hani85 said:
Gil81
Did you mean, for example,
[ROM][OFFICIAL][CyanogenMod 10.2 Alpha4 for Exhilarate][TeamChopsticks]
Click to expand...
Click to collapse
That's a CM rom(cyanogenmod) not touchwiz based... a good tw based rom I use is projectx 3.1 ... there is a new version of it, but I haven't flashed it as I've been on vacation and been playing around with a rom I ported for my gtab 10.1...
Jellyverse is a good one...
Really all of them are good roms.. just depends on you're style.. lol..
Also... I think that rom you linked is not for this device.. I didn't look, but it says for exhilarate..
---------- Post added at 04:17 PM ---------- Previous post was at 04:13 PM ----------
@Hani85
Follow this link... http://forum.xda-developers.com/forumdisplay.php?f=1284&nocache=1&z=8507063013967127
Roms for epic 4g touch.. touchwiz based..
I'm sorry for taking your precious time ...... I'm inexperienced
++++++++++++++++
If Flash Jellyverse
You will work with me sim card ?
++++++++++++++++
Can you bring a link rom that works with my phone.
So I can use the (SIM CDMA) port. And network connectivity in my country
up up up
Please help me
Fix
Have you fix your phone?
Got same problem after flashing exactly same ROM.
Nothing help so far, spend like 4-5 sleepless nights....
alexsahka said:
Have you fix your phone?
Got same problem after flashing exactly same ROM.
Nothing help so far, spend like 4-5 sleepless nights....
Click to expand...
Click to collapse
Have you tried redownloading? Sounds like a bad download. Make sure you verify the file integrity via md5sum.
Yes, flashed maybe 2-3 different ROMs nothing helps.
I've lost EFS folder. Trying to find out different methods to restore EFS folder/informations from dev/ partition. :crying:
alexsahka said:
Yes, flashed maybe 2-3 different ROMs nothing helps.
I've lost EFS folder. Trying to find out different methods to restore EFS folder/informations from dev/ partition. :crying:
Click to expand...
Click to collapse
Not ROMs, you need to reflash the Odin One Click, ROM flashes don't touch this folder
Is this one going to work in my situation http://www.rwilco12.com/downloads.php?dir=Files/Devices/Samsung%20Galaxy%20S2%20%28Sprint%29%20%28SPH-D710%29/Stock%20ROMs/JB/FL16/No%20Data%20Restore/Rooted
Yes but I recommend using GB27 for Sprint, GB28 for Virgin Mobile, or GC01 for Boost
All are located here-http://forum.xda-developers.com/showthread.php?t=1903252
My S2 exactly on this ROM SPH-D710_GB27_1014481_Rooted_Restore.exe now, but still I cannot restore the ESF folder.
alexsahka said:
My S2 exactly on this ROM SPH-D710_GB27_1014481_Rooted_Restore.exe now, but still I cannot restore the ESF folder.
Click to expand...
Click to collapse
Then I guess try the other one... It sucks there is no way to verify the md5 on rwilco's site
Hani85 said:
Hello
After flashing ROM from here
SPH-D710_GB27_1014481_Rooted_Restore.tar.md5.gz
I forgot what the Phone EFS Clear checkbox did in Odin
Now
* factory mode is on !!!!
CHANNEL : 0
SIO MODE : 2
PDA : SPH-D710.GB27
Baseband Ver : S710.0.3S.GB27
HW : H710.0.3S.Q
* nv_data.bin is ma Missing
HC-KTool >> Check EFS Backup
/sdcard/efs.img fond
/!\ nv_data.bin NOT FOUND in backup !!!
/sdcard/efs.tar.gz fond
/!\ nv_data.bin NOT FOUND in backup !!!
* Status:
Network : Sprint
Service state : In service
Mobile network state : Disconnected
My phone number : 000-000-0016
MIN : 0000000016
MEID : DEs\17600000000 Hex\B0000000
Device status : Official
I tried all ways to change ENS number
In the latter has to be a file nv_data. Bin
It is the problem in the foundation
How To Change Your ESN Number , Repair Corrupt, Bad or Incorrect MEID/ESN Number , How to restore your MEID/ESN , [Guide] Samsung Android - Repair EFS / IMEI WITHOUT BOX , Editing your Product code
Also tried to flashing new Rom SPH-D710.EL29_CL852097 , D710_CODE_SPH-D710.FC24_CL287574_REV02_user_low_ship.tar.md5 , SPH-D710_SPR_D710USEG30
Please help me find a way to make new files to a folder EFS.
Forgive me you too long to detail
Click to expand...
Click to collapse
The only way you'll be able to get those items back is to get the NV folder unlocked and salvaged from another sprint s3. Get one with a cracked screen missing back but USB and touch still working. After that you basically salvage the info from it and junk it after. Its illegal for two phones to have the same info active/receiving signal at the same time. To unlock the NV folder you'll need QPST. ither buy it 3.5 for 100$ or look around for for 2.7.402 or 2.7.384 or 2.7.374
I forgot which one detects the S2 and allows the edits. The open sesame door method works on it as well I believe. I did one not to long ago but my memory isn't fresh on it. Or you can use the android terminal method that is used on the prevail in order to get the files. Google is your friend for the "QPST" and for the "open sesame door method" and for the "android terminal backup NV items on prevail".
hello ! after a week of testing ive finally found a solution for samsung galaxy s4 clone ( mt6572 gt-i9500 ). with no service !
Soo , you have no service and can't make calls ! follow this instructions and you will be talking on your phone in no time
Its very simple : ( i'll add the necessary links / software for this job )
1. you need SP_Flash_Tool_exe_v3.1316.0.150
2. you need the WORKING ROM ! modified by me
3. you need MtkDroidTools
( this version is allready modified to work with mt6572 )
The procedure :
we must first format the phone using SP_Flash_Tool_exe_v3.1316.0.150 . soo we open the program and select the scatter file.txt atached in the rom . hit format and then hit OK.
Now remove the battery and connect the usb cable to the phone. it will start formatting the phone. wait till is ready ( you will see a green circle )
At this point , the phone is ready to receive the new ROM
you have allready selected the scatter file early'r .
THIS STEP IS VERY IMPORTANT !!! uncheck the CACHE and USRDATA at the bottom.
Now hit Download button , you will get a warning message, just press YES
Now put the baterry back into the phone, and connect the usb cable. wait till the process end's and when you see the green circle you can disconect the phone, remove the battery, insert back the battery and power on the phone , and voila !! your phone have working network !!
Next step is to write the IMEI...
Use MtkDroidTools ( you must have debugging mode on in the phone ) connect the phone to the usb cable, wait till MtkDroidTools see your phone , and then hit the big imei button. There you must provide the imei number ( you can find it under the battery ) after that you hit write imei and then reset your phone and you are good to go
I presume that you allready have the usb drivers ( if not, i can also provide them )
For other questions use the forum below
If i have saved your day, maybe you consider making a small donation ( for that, use the DONATE TO ME button under my name )
Have a nice day !
Thanks for this tut, @pacattosul its very easy to follow, unlike some I've come accross, could I ask this?, will this not work by just using Mtkdroid tools as in the latter part of your tutorial? without the need of flashing a new rom?
Also I hope you dont mind a bit of constructive criticism, the developer of Mtkdroid tools @rua1 has specifically asked that his program is not placed on other sites for download, perhaps you could just change your post to link to his thread, here..... http://forum.xda-developers.com/showthread.php?t=2160490 Plus I do feel you are rather inviting problems by not specifying the details and build of your device that you have tested this method on, I don't have this phone but I'm sure there are quite a few different versions out there and the result of flashing the wrong preloader for your device can be a $200 paperweight, as I'm sure you know, and with that in mind I would stress that before embarking on this, a full backup is desirable in case it all goes t*ts up. Hope you don't mind my mentioning this stuff, if you decide to make those few minor changes, I'll edit and delete this paragraph, don't want to spoil your thread.
hello oscarblue48 !
i really don't mind that you point my mistakes... im actually happy cause as you say, MTKtools its somebody's work and should really be apreciated. BUT, this tutorial only work's with this special version of MTKtools !! i'm not responsable if you use any other tools/versions !!
you say that people may broke 200$ phone if they flash this rom... ok it may happend, but only if they mistake the model-version of the phone ! like ive say'd this tutorial and the rom only goes for MT6572 GT-I9500 SAMSUNG GALAXY S4 CLONE !! if they flash this rom on other devices they are responsible for what they do...
Actually , this rom goes for dead phones as well ( as i mentioned on other site ) , so i supose that most of the people , when they reach this tutorial, its for a good known reason
You also ask me if you can only use the mtktools... well you can easylly use that program, but you will probably not change anything inside that phone. most of the people try'd mtktool and complain that the imei remains null or empty after writing with this tool... soo in order to fix the annoyng NO SERVICE problem, i recommend that you follow the entire tutorial
I hope ive answered all your questions, and offcourse if you encounter any problem you can allways comeback and simply ask
Hi bro help me out here is my thread : http://forum.xda-developers.com/showthread.php?p=50483872
I tried your rom but still not working i can enter to recovery mode with different preloader and doesn't show me black screen when turned on as my big problem is i can not format my nand as you will see in my thread i was messing up with boot logo via root as it was rooted with supersu...so any help please as i have tried alot roms and i can't find stock rom for this phone MTK6572_S00 samsung s4 this is made in korea by samsung...and I do not have backup of my rom...
Thanks in advance
Please help
Always getting - 4032(DRAM FAILED) while downloading- Followed same steps !
Appreciate any help
Update:
I have flashed it successfully - Also the IMEI, but still not registering to network.
be aware !! you have the dual sim ( 2 sim ) phone or single sim?? this only works for single sim phone... also, you must not try to flash this on dual sim phone !!
try this... go to settings and at the network tab change the connection mode... chose hspda preffered... that may do the trick !
@pacattosul would you please give me thelink file?cuse i'm having the same problem my device cannot detect any sim card my device is
hardware : mt 6572
model : gt i9500
buildnumber :alps.jb3.mp.v1
build date utc : 20140116-083248
android v :4.2.2
basebanv :molly.wr8.w1315.md.wg.mp.v1.p4.2013/09/27 05:05
kernel :.4.5([email protected])(gcc version 4.6 x google
. thank u
pacattosul said:
be aware !! you have the dual sim ( 2 sim ) phone or single sim?? this only works for single sim phone... also, you must not try to flash this on dual sim phone !!
try this... go to settings and at the network tab change the connection mode... chose hspda preffered... that may do the trick !
Click to expand...
Click to collapse
Hi mine is single dim and exactly same as urs. No matter what I choose it always goes to gsm only
Sent from my D5503 using xda premium
are you using a 3G only sim card? hope you understand what i mean to say... there are normal sim cards that can connect on edge or 3g network and some other company's that only use 3g network... if you use one of this sim cards, please try another sim card just till you get on the network , and then you can switch to your regular sim card...
hope that help's you..
Sometimes saying thanks is not enough.
hardware : UNIVERSAL5410
model : i9500
buildnumber :JDQ39.19500XXUAMDK_v2
build date utc : 20140215-054157
android v :4.2.2
basebanv :moly.wr8.w1315.md.wg.mp.v1.p3,2014/02/11 14:38
kernel :.3.4.5 ([email protected])(gcc version 4.6 x google
please links
[email protected]
pacattosul said:
are you using a 3G only sim card? hope you understand what i mean to say... there are normal sim cards that can connect on edge or 3g network and some other company's that only use 3g network... if you use one of this sim cards, please try another sim card just till you get on the network , and then you can switch to your regular sim card...
hope that help's you..
Click to expand...
Click to collapse
I think i found the problem , nothing to do with ROM i assume, it was all about IMEI, the IMEI given (as well as printed on device) seems invalid!!
Thanks anyways
Please could i have the link to the rom?
Many thanks
Paul
Could I also have the link for the rom and the usb drivers, please?
S4 Clone Mtk6572 error 4032
hello all specialists
I have a clone mtk6572 s4 s00
have unfortunately formatted with flash tool
since it is a UBIFS system I can no longer flahen it
the pc recognizes it yet but it can not be switched on
ask for your help
1000 thanks:crying:
Canetaazul said:
Could I also have the link for the rom and the usb drivers, please?
Click to expand...
Click to collapse
I9500 MT6572 need link for rom, thnks
Hi, can I have the link for your rom, I hope this is the right one for my dead phone.
Build Number: JDQ39.I9500XXUAMDK_v2
Thanks
Hi, can I have the link for your rom, my handset is very loggy, hope this will fix it thanxxx..
Help!!
Please I need your help. I have a bricked S4 clone. Can do you send me the rom link? Thank you.
---------- Post added at 08:13 PM ---------- Previous post was at 08:02 PM ----------
Hi, I have the same device. Did you fix the problems? My S4 is bricked. If you fix the problems please tell me how did you do?. Thanks
Will this work on MT6589
i have a rooted s4 clone and out of nowhere the network stopped. will your method work on my phone?
Quad core ARM v7 1.6ghz
Please link up ROM and droid tools
My G3 was reported as stolen (presumably by the seller) shortly after I bought it, so the IMEI was blocked on my network. I sent the phone to the US for repair and, after some hassle and a complaint to Paypal, I received it it by return post almost 6 weeks later. Not sure if I can mention the "repair" company here but PM me for details, if you'd like them.
The phone now works on Edge / 3G but will not connect to any Australian 4G network. I've tried flashing the European (4.4.2) tot and Australian 5.0 tot but the situation persists. In slight desperation, I'll try the Hong Kong tot later today but in the meantime, does anyone know of a solution?
Possibly useful info:
There is no EFS backup.
The (new) IMEI is displayed in Phone Information and with the "06" code entered in the phone.
The model number is D855 (not D855K or any other variant)
The phone was rooted and running (I think) ANHD Lollipop when it was sent in for repair.*
Extensive searching has not produced anything that has been of use.
LTE is available in Network Selection and it sticks after reboot, so no need to use 'hidden menu', delete system files, etc...
* Probably the cause. The only instructions given were to send the phone without SIM or external SD card.
Have you tried this: http://forum.xda-developers.com/showpost.php?p=54621213&postcount=26
Or this?
http://forum.xda-developers.com/lg-g3/general/mod-root-activate-lte-g3-t2819387
Yes. It's nothing to do with settings, I think. I have LTE in settings, no problem. It just won't connect to any band n the hidden menu (I tried each one). Seems that the Australian LTE bands have been knocked out, somehow.
Just discovered that the phone will not connect to data network if GSM only is selected but GSM/WCDMA will switch between EDGE/3G (H - no H+)
HK .tot file did not resolve the problem.
montresor60 said:
Yes. It's nothing to do with settings, I think. I have LTE in settings, no problem. It just won't connect to any band n the hidden menu (I tried each one). Seems that the Australian LTE bands have been knocked out, somehow.
Just discovered that the phone will not connect to data network if GSM only is selected but GSM/WCDMA will switch between EDGE/3G (H - no H+)
HK .tot file did not resolve the problem.
Click to expand...
Click to collapse
Problem is QCN related, what was your G3's variant ? Model code ?
..
os_man said:
Problem is QCN related, what was your G3's variant ? Model code ?
Click to expand...
Click to collapse
Thanks for your reply. D855
I have the correct qcn file. How should this be applied?
montresor60 said:
Thanks for your reply. D855
I have the correct qcn file. How should this be applied?
Click to expand...
Click to collapse
I have a article about this, but its in Turkish, with pictures of course and links for necessary files, will you please traslate the link and just read the second part only , starting as restoring qcn bacup, if you are on kitkat, if you are lollipop please downgrade to kitkat first ( also link to kitkat kdz ).
I have necessary qcn too, if you need it (not the one in the article a better one).
Feel free to ask anything after you look at it.
I will write an English article too in a couple of days, if you are stuck on translated one, you wait for it too.
http://www.androidbrick.com/lg-g3-sinyal-sorunu-3g-sorunu-ses-sorunu-cozum-burada/
---------- Post added at 11:43 PM ---------- Previous post was at 11:39 PM ----------
os_man said:
I have a article about this, but its in Turkish, with pictures of course and links for necessary files, will you please traslate the link and just read the second part only , starting as restoring qcn bacup, if you are on kitkat, if you are lollipop please downgrade to kitkat first ( also link to kitkat kdz ).
I have necessary qcn too, if you need it (not the one in the article a better one).
Feel free to ask anything after you look at it.
I will write an English article too in a couple of days, if you are stuck on translated one, you wait for it too.
http://www.androidbrick.com/lg-g3-sinyal-sorunu-3g-sorunu-ses-sorunu-cozum-burada/
Click to expand...
Click to collapse
PS : the trick is deleting old values of Qcn ( nv_related modem setup etc), that part ill tell you in private becouse its imei related.
mail to : [email protected] please.
os_man said:
I have a article about this, but its in Turkish, with pictures of course and links for necessary files, will you please traslate the link and just read the second part only , starting as restoring qcn bacup, if you are on kitkat, if you are lollipop please downgrade to kitkat first ( also link to kitkat kdz ).
I have necessary qcn too, if you need it (not the one in the article a better one).
Feel free to ask anything after you look at it.
I will write an English article too in a couple of days, if you are stuck on translated one, you wait for it too.
http://www.androidbrick.com/lg-g3-sinyal-sorunu-3g-sorunu-ses-sorunu-cozum-burada/
---------- Post added at 11:43 PM ---------- Previous post was at 11:39 PM ----------
PS : the trick is deleting old values of Qcn ( nv_related modem setup etc), that part ill tell you in private becouse its imei related.
mail to : [email protected] please.
Click to expand...
Click to collapse
Thank you! The instructions are 90% clear through the translation but I need to know how to perform this trick precisely so that it works the first time.
Will be in touch soon. Thanks for being such a supportive member of this community.
montresor60 said:
Thank you! The instructions are 90% clear through the translation but I need to know how to perform this trick precisely so that it works the first time.
Will be in touch soon. Thanks for being such a supportive member of this community.
Click to expand...
Click to collapse
You are wellcome, this is the way it should be i think. I'm old enough who knows sharing is a must ..
http://www.androidbrick.com/qualcomm-snapdragon-imei-tamiri-ders-4-qualcomm-snapdragon-imei-repair/ , the trick is to "zero" necessary partitions, and put your original imei in an orginal untouched qcn backup of your version. You can see it in the pictures of this article. Your 3 partition that holds this info are 21, 22 and 24.
os_man said:
You are wellcome, this is the way it should be i think. I'm old enough who knows sharing is a must ..
http://www.androidbrick.com/qualcomm-snapdragon-imei-tamiri-ders-4-qualcomm-snapdragon-imei-repair/ , the trick is to "zero" necessary partitions, and put your original imei in an orginal untouched qcn backup of your version. You can see it in the pictures of this article. Your 3 partition that holds this info are 21, 22 and 24.
Click to expand...
Click to collapse
OK!
Flashed back to KK, zeroed modem partitions, flashed qcn modified for me by os_man
Success! My G3 lives again!
Thank you os_man!
Can't access to the article requires password
os_man said:
I have a article about this, but its in Turkish, with pictures of course and links for necessary files, will you please traslate the link and just read the second part only , starting as restoring qcn bacup, if you are on kitkat, if you are lollipop please downgrade to kitkat first ( also link to kitkat kdz ).
I have necessary qcn too, if you need it (not the one in the article a better one).
Feel free to ask anything after you look at it.
I will write an English article too in a couple of days, if you are stuck on translated one, you wait for it too.
---------- Post added at 11:43 PM ---------- Previous post was at 11:39 PM ----------
[/COLOR]
PS : the trick is deleting old values of Qcn ( nv_related modem setup etc), that part ill tell you in private becouse its imei related.
Click to expand...
Click to collapse
I can't access the article it asks for a password to see the article
Please os_man if you have it could you please lend me that???
and if possible the QCN file you have?
sajithdz said:
I can't access the article it asks for a password to see the article
Please os_man if you have it could you please lend me that???
and if possible the QCN file you have?
Click to expand...
Click to collapse
[email protected] please.
Send you the email allready need the password for the article
I also need the password for the article. Does anyone still have it? Thanks!
[email protected]
os_man said:
[email protected] please.
Click to expand...
Click to collapse
I sent you an email !
QCN file
Dear friends Could you please share a d851 (t-mobile) qcn file. The only way i can get rid of from network issues get 4g back is the original qcn file. I would be realy glad.
I have problems with 4G/LTE connection too
Can someone help me with the password please? or maybe another guide?
Thanks!
Can't give the pass of the article for now, like i said soon will a detailed english article, i dont want someone opens a topic related sorry, young ones just love that Trying to help every human beeing who contacts me through my e-mail or my website, greetings..
os_man said:
[email protected] please.
Click to expand...
Click to collapse
Thank you very much for your help.
cybertex2013 said:
Thank you very much for your help.
Click to expand...
Click to collapse
Improved Android? .. Yes, please! You are wellcome..