Related
Just wondering if its normal for the temp sensor to read 160c+ in -10c weather.
This happened when i was walking home. Cpu reports extremely high temp and just wondering if this effect any performance.
Bell, htc 10, boot unlocked, S-OFF, 1.90.666.4
.....
Wondering if it's a false reading. Can you download another app that monitors CPU temps and see if there are any discrepancies between the two apps?
Sent from my HTC 10
Wow,that's really interesting. For my information, are you holding the phone in boiling water?
matthewacbroad said:
Just wondering if its normal for the temp sensor to read 160c+ in -10c weather.
This happened when i was walking home. Cpu reports extremely high temp and just wondering if this effect any performance.
Bell, htc 10, boot unlocked, S-OFF, 1.90.666.4
Click to expand...
Click to collapse
Probably a false reading. Your battery is too cool for a cpu this hot. Also cpu gets permanently damaged at temperatures this high. Either a sensor is damaged or app giving false reading.
that's because of the minus 10°C outside ^^
This has happened quite a few times for me when i used the phone in the freezer.
the CPU sensor somehow doesn't handle minus temperatures very well. Because the battery is constantly used it heats itself up and does not go into minus temperature.
The SoC itself is often in DeepSleep or almost idle. So it doesn't draw that much power, not enugh to keep the temperature over minus degrees, especially with an aluminum body that sends the complete outside temperature inside, not isolating like glass.
Don't worry about it
If you're curious you can install the app Stability Test https://play.google.com/store/apps/details?id=com.into.stability
It heats up the CPU pretty fast, then you can find out what's the lowest normal temperature the sensor can recognize ^^
P.S
You probably cannot damage a CPU due to heat. On my old Xperia Z2 i tried to disable ALL Thermal throttling, and run a Stresstest, when the CPU temp reached 91°C the phone simply shut down. Emergency shutdown to prevent overheating damage. Not sure if it's from Android or CPU hardware protection.
Most Intel CPU's do have a hardware protection, wouldn't be surprised if Snapdragons had the same.
Haldi4803 said:
that's because of the minus 10°C outside ^^
This has happened quite a few times for me when i used the phone in the freezer.
the CPU sensor somehow doesn't handle minus temperatures very well. Because the battery is constantly used it heats itself up and does not go into minus temperature.
The SoC itself is often in DeepSleep or almost idle. So it doesn't draw that much power, not enugh to keep the temperature over minus degrees, especially with an aluminum body that sends the complete outside temperature inside, not isolating like glass.
Don't worry about it
If you're curious you can install the app Stability Test https://play.google.com/store/apps/details?id=com.into.stability
It heats up the CPU pretty fast, then you can find out what's the lowest normal temperature the sensor can recognize ^^
P.S
You probably cannot damage a CPU due to heat. On my old Xperia Z2 i tried to disable ALL Thermal throttling, and run a Stresstest, when the CPU temp reached 91°C the phone simply shut down. Emergency shutdown to prevent overheating damage. Not sure if it's from Android or CPU hardware protection.
Most Intel CPU's do have a hardware protection, wouldn't be surprised if Snapdragons had the same.
Click to expand...
Click to collapse
with no OC (AKA 2GHZ + 1.5GHZ) I got 81c, with 2.2Ghz + 1.7Ghz I hit 92c but it kept going with no throttling
95c, i made a video
https://www.youtube.com/watch?v=jIwjn8h1Raw
If you do that next time can you do me a favour and get the dmesg?
If you want to you can "dmesg | grep [THERMAL]" to make it smaller.
Does the Samsung Galaxy Note10+ (Snapdragon) throttle the CPU to save battery life or manage heat? If so, is there some way to modify that?
Of course there would be a way of doing it, but first root must be achieved
i believe so i keep it on high performance mode at all times
I've only seen this happen if you have either of the power saving moves enabled.
I ran a test with the device set to high performance mode, and there is definitely some modest throttling after the 2 minute mark. Root can't come soon enough.
Results: https://m.imgur.com/a/ySI0LBH
Here are the results of a more intensive test: https://imgur.com/a/3t4o6f3
nwitkin said:
I ran a test with the device set to high performance mode, and there is definitely some modest throttling after the 2 minute mark. Root can't come soon enough.
Results: https://m.imgur.com/a/ySI0LBH
Here are the results of a more intensive test: https://imgur.com/a/3t4o6f3
Click to expand...
Click to collapse
So you want it to overheat instead of slow down? Damn thing says 174 degrees.
Can someone, who has the Exynos version, do the CPU Throttling Test and share the picture, please?
The only rootless setting you can set for it is the moderate power save that fix it to 70%
You need root otherwise.
Every CPU have Throttling. This is about temp. increasing. Have one test in GSMARENA.COM
Flagships vs Gaming phones. After 1 hour hard gaming casual flagships decreasing CPU power on 60, 70 % to prevent overheating. In Gamer phones like ROG or Black Shark decreasing is only around 90%. This is because they have active cooling systems.
propov said:
Every CPU have Throttling. This is about temp. increasing. Have one test in GSMARENA.COM
Flagships vs Gaming phones. After 1 hour hard gaming casual flagships decreasing CPU power on 60, 70 % to prevent overheating. In Gamer phones like ROG or Black Shark decreasing is only around 90%. This is because they have active cooling systems.
Click to expand...
Click to collapse
I agree. But not only gaming devices. For example, Sony Xperia XZ Premium doesn't throttle that much.
I just wanted to see if there is a difference in Throttle on Exynos and Snapdragon.
If someone could do a CPU Throttling Test on Exynos, I would be very happy!
Exynos is horrendous. Just look at gips. Im starting to believe more and more there's something wrong with my device.
Is it normal for this device to heat up from basic usage (such as browsering and social media).
By heat I do not mean overheating but it does make the hand feel quite warm.
This worries me alot since I get annoyed by phones who get hot with basic usage.
Would this be because of the sd870 chip?
For me it does warm up a little bit during normal use but it's way better than my previous phones, idk maybe my standards of phone temperature is different than y'all. And if it was running a SD888 it would be even worse.
Jing Arjay87 said:
For me it does warm up a little bit during normal use but it's way better than my previous phones, idk maybe my standards of phone temperature is different than y'all. And if it was running a SD888 it would be even worse.
Click to expand...
Click to collapse
I think mayb the issue is me comparing it to a snapdragon 730g
This was my concern also but in my case hearing was mostly during charging. I replaced the device and so far things are a tad bit better
TweaknFreak said:
This was my concern also but in my case hearing was mostly during charging. I replaced the device and so far things are a tad bit better
Click to expand...
Click to collapse
Charging especially fast charging produce heat.
Charging is an electrochemical reaction that requires a certain amount of heat to charge properly. Oddly Li charging is a mildly endothermic reaction but resistive elements in the cell produce much more heat than is absorbed.
♤Do not use phone while charging as it will skew the charging curve.
♤Listeners to music (no internet streaming) on bt with screen off is generally ok.
Best start temperature for fast charging is 82°F or higher (85-90°F seems optimum on my N10+).
Do not let battery temperature exceed about 101°F while charging, cool as needed.
♤I use a fan and/or a damp microfiber cloth to keep it cool, works well.
Li plating will permanently degrade your battery and can cause outright failures.
Never charge a Li polymer that is near freezing temperatures.
Charging below 72°F or in high temperatures (exact value unknown, some say >140°F but this may not apply to Li polymer) My Note 10+ will stop charging at about 102°F so hence the 100°F limit. In any case temperatures higher than 90°F aren't needed for fast/optimum charging and only shorten the lifespan of the battery.
EvilMegaDroid said:
Is it normal for this device to heat up from basic usage (such as browsering and social media).
By heat I do not mean overheating but it does make the hand feel quite warm.
This worries me alot since I get annoyed by phones who get hot with basic usage.
Would this be because of the sd870 chip?
Click to expand...
Click to collapse
Nope, miui is chock full of bloatware and make these phone warm up even some basic task. Tried several custom room in our forum, no heat up at all
I think it has to do since its summer too, debloated through but it still gets warm using social if I'm outside or if its under the sun.
From my logic this has 100% to do with a higher end cpu since as I said my sister samsung a71 does not do that.
Mostly worried that the xiomi build quality is **** that's why I asked
EvilMegaDroid said:
I think it has to do since its summer too, debloated through but it still gets warm using social if I'm outside or if its under the sun.
From my logic this has 100% to do with a higher end cpu since as I said my sister samsung a71 does not do that.
Mostly worried that the xiomi build quality is **** that's why I asked
Click to expand...
Click to collapse
Use manual brightness control. Try to avoid going over 50%... and don't use in direct sunlight. High screen brightness increases current drain/heat a noticeable amount.
You're on to something when it comes to brightness... Newer panels that are being used in the latest Chinese devices all have very high sustained brightness. Which is nice and all but no1 had considered how that will play in combination with the newest chips,
If you compare F2 and F3 the earlier model only had sustained brightness of 500cd/m2 whereas the newer model can sustain 900cd/m2 of brightness - that's a huge difference
Then what about chips? Both snapdragon 888 and 870 are dumpster fires ( Even the dimensity chips ) , while the performance gain is insane compared to last gen so is the heat output... And sadly even the gaming devices with cooling fans struggle to keep the chips from throttling. Take black magic 6 pro for a shameless example (snap 888), it reaches upwards of 55C on the phone body itself during benchmarking with no signs or intention for throttling down to save your hands- that itself should be illegal but no1 ****ing cares since how else are they gonna reach those benchmark numbers.... ( 54C can cause full thickness burns in a matter of 30 seconds or so )
I don't have poco f3 to check but from looking at stress tests on YouTube you can see that they are much more conservative when it comes to heat. It reaches only 42C during benchmarking then starts to throttle down and basically hovers around that temp 42C-44C.
The chips are already insanely good when it comes to performance but the cooling is pacing behind... So yeah it's pretty normal that your device is getting hot - so is every other device on the flagship market rn. Most you can do to solve that would be in this order > Get a peltier cooling device like blackshark fun cooler pro > Lower the brightness to what's usable for you and hope it's enough to somewhat delay the throttling > The last one would be messing with the phone itself like downclocking it or lowering the voltage. It's a cat and mouse game , the throttling will come eventually , the only way out I see would be the first option or the last one if you're capable enough to mess with that and are lucky enough to get a chip that undervolts nicely.
Cooling?
Simply use a damp microfiber cloth.
While playing games my Red Magic 6 phone does get quite warm even with the built in fan. Is the Dual Core Cooler or Pro Ice Dock for the Red Magic 6 worth buying to keep the temps down.
While playing games like Genshin Impact temps can reach somewhere around 37°C to around 40°C on medium settings (or 48°C when playing at max settings)
The typical normal CPU temperatures with mobile devices range between 30 to 35 °C continuous browsing considering the ambient temperature around is close to 27 to 30 °C. When it comes to heavy gaming the temperatures soar at 40 to 44 °C.
Take note that a high CPU temperature is not caused by the CPU itself. Games generally do not put pressure on CPU, but on the GPU. The GPU usage for the 3D HD games are generally very high, and can cause such temperature increase. So yes, that kind of 'GPU' temperature is normal while gaming
jwoegerbauer said:
The typical normal CPU temperatures with mobile devices range between 30 to 35 °C continuous browsing considering the ambient temperature around is close to 27 to 30 °C. When it comes to heavy gaming the temperatures soar at 40 to 44 °C.
Take note that a high CPU temperature is not caused by the CPU itself. Games generally do not put pressure on CPU, but on the GPU. The GPU usage for the 3D HD games are generally very high, and can cause such temperature increase. So yes, that kind of 'GPU' temperature is normal while gaming
Click to expand...
Click to collapse
So is it not worth getting the Red Magic Dual Core Cooler
Deleted member 1890170 said:
The typical normal CPU temperatures with mobile devices range between 30 to 35 °C continuous browsing considering the ambient temperature around is close to 27 to 30 °C. When it comes to heavy gaming the temperatures soar at 40 to 44 °C.
Take note that a high CPU temperature is not caused by the CPU itself. Games generally do not put pressure on CPU, but on the GPU. The GPU usage for the 3D HD games are generally very high, and can cause such temperature increase. So yes, that kind of 'GPU' temperature is normal while gaming
Click to expand...
Click to collapse
Hi there,
May i reconfirm again which temperature is the most concerned part for a gaming smartphone? Is it its cpu or the battery?
I experienced quite frequently overheat issue as cpu temperature could reach 50°c while the battery boost up till 45°c and it boasting rapidly until you can feel the stress when you are gaming in warm surrounding.
Attached is my reference using cpu/gpu meter notification app
imNazreen said:
Hi there,
May i reconfirm again which temperature is the most concerned part for a gaming smartphone? Is it its cpu or the battery?
I experienced quite frequently overheat issue as cpu temperature could reach 50°c while the battery boost up till 45°c and it boasting rapidly until you can feel the stress when you are gaming in warm surrounding.
Attached is my reference using cpu/gpu meter notification app
Click to expand...
Click to collapse
I can only measure the battery temperature on this phone. And it reports that the temps rise from 35°C to 47°C - 50°C. Right now I haven't played anything so temps are really low, but this is the only way I can measure it.
Code:
/*
* Your warranty is now void.
* I am not responsible for bricked devices thermonuclear war, or you getting fired because the alarm app failed
* Please do some research if you have any concerns about what this MOD does before flashing it
* YOU are choosing to make these modifications, don't point fingers at me if something goes wrong
*/
Ladies and gentlemen,
A small modification for you with great and HOT results.
Changes I made to the thermal configuration:
-The default Virtual-SKIN-based throttling threshold was starting at 39 Celsius, that was removed and the "first" threshold value is now 55 Celsius (at 55C it will HARD throttle, throttling is not completely eliminated here on purpose and at 55C it will behave the same as the default throttling mechanism at that temperature).
Keep in mind that SOC will throttle regardless of when it hits its own TjMax values so you don't need to worry about any "meltdown". lol
- Display won't switch to 60Hz anymore and neither will the maximal possible brightness be reduced as it is normally happening with stock throttling thresholds.
So far I'm using this on EvoX ROM but this should work basically on ANY ROM as the throttling is relying on the same file and as far as I managed to observe (amount of ROMs checked out) it's the same on those ROMs.
Pros:
- Throttling thresholds are drastically increased, meaning if you experienced any HIGH FPS drops during playing any "heavy" games, this will prevent that from happening to an extent and time.
- Any apps that rely on high processing power, will have more space and time to work without being affected by thermal throttling
Cons:
- Depending on your usage and what exactly you do on your phone, the device could get uncomfortably warm in your hands, and battery temperature will raise MORE than you got used to it since the SOC won't be throttled that fast as it does on the stock. Keep in mind that high battery temps are not healthy, and they will cause faster degradation. Degradation occurs anyways, the question is only how fast based on the temps the battery is being exposed to. Many OEMs allow such temps, so, Pixel 7 series with this mod isn't anything different compared to them.
- If you're a heavy "gamer" and play some games like Genshin, TOF, COD (at 120fps), etc... (you'll have a smoother experience (less FPS drops) based on slower/weaker throttling) but I recommend always using a Peltier cooler to keep that battery and the device as cool as possible (regardless if this phone or another).
Why did I create this mod?
I personally use an app called MotionCam Pro. It's basically a RAW video recording app that relies on HIGH processing power (it records RAW DNG frames) and it heats up the device pretty fast, well, Pixel 6/Pro hits the throttling threshold really fast and it's causing the recording to drop A LOT of frames to a point that the footage recorded is not "usable".
With this mod, I can now shoot RAW videos for longer periods with almost no dropped frames and under higher ambient temps. Yes, the phone warms up much more, but it does the JOB for me and that's all that matters to me anyway. I don't care if I'll need to replace my battery after 1 year instead of 2 years because I lost maybe 15-20% of the battery capacity (I upgrade my phones almost yearly).
Have fun frying eggs on your phone.
Installation
- Flash via Magisk
- Reboot your device
- Enjoy
Keep in mind that this is a TEST MOD because I don't own the device and can't test it myself.
Feedback is appreciated.
Reserved
JohnTheFarm3r said:
Keep in mind that this is a TEST MOD because I don't own the device and can't test it myself.
Feedback is appreciated.
Click to expand...
Click to collapse
This module increased the performance of pixel 6 pro by 25 % in the same temperature. Previously within 1/2min cpu would get 150-165k GIPS but after flashing module performance is stable around 200-220k GIPS . But the X1 cores aren't still being utilized to their fullest . It's still being limited to 1.5 Ghz even thou it can reach 2.8 Ghz . It there a way to tweak the module to completely remove this throttling at such low temperatures ? Even the awful snapdragon 888 doesn't even begin throttling before 40 °C
Mahbubur Rahman Siam said:
This module increased the performance of pixel 6 pro by 25 % in the same temperature. Previously within 1/2min cpu would get 150-165k GIPS but after flashing module performance is stable around 200-220k GIPS . But the X1 cores aren't still being utilized to their fullest . It's still being limited to 1.5 Ghz even thou it can reach 2.8 Ghz . It there a way to tweak the module to completely remove this throttling at such low temperatures ? Even the awful snapdragon 888 doesn't even begin throttling before 40 °C
Click to expand...
Click to collapse
No, because the prime core is probably hitting the TJMax, hence it's throttling down. AFAIK, TjMax on Tensor G1 is set at 90c.
The cooling design inside the Pixel devices can't handle too much heat (thermal capacity is weak) so it's normal behavior for the CPU to scale down the frequencies based on the temperature limit on the CPU.
Also, don't mix the battery temps with the CPU temps. CPU reaches temperatures up to 90c on G1.
Also, even the 888 throttles when it hits the TJMax. That's completely normal throttling behavior to protect the chip from cooking up.
JohnTheFarm3r said:
No, because the prime core is probably hitting the TJMax, hence it's throttling down. AFAIK, TjMax on Tensor G1 is set at 90c.
The cooling design inside the Pixel devices can't handle too much heat, so it's normal behavior for the CPU to scale down the frequencies based on the temperature limit on the CPU.
Click to expand...
Click to collapse
Well that's just bad design on Google's part can't do anything about that . Still this is huge improvement from the dog **** performance previously. Even throttled it's like a snap 865 . Unthrottled it would be like a snap 888
work well on my pixel 6 Pro ,March update
Mahbubur Rahman Siam said:
Well that's just bad design on Google's part can't do anything about that . Still this is huge improvement from the dog **** performance previously. Even throttled it's like a snap 865 . Unthrottled it would be like a snap 888
Click to expand...
Click to collapse
Do you have the unthrottled magisk module,I want give it a try
Juuuuune said:
work well on my pixel 6 Pro ,March update
Do you have the unthrottled magisk module,I want give it a try
Click to expand...
Click to collapse
You need a cooler for that . Also cpu will thermal throttle regardless of outside temperature as soon as it hits internal TJ max value . Your best bet is to use a aluminum foil inside your case to help with heat dissipation
So far so good. Will give feedback if there's anything weird.
All the work so far is normal, thank you very much for your work! I shared it with some of my friends (China, also using pixel6pro). Strangely, some of their mobile phones will be stuck in the start-up loop (boot Google Logo loading interface) after flashing into this mod. As far as I know, this problem has nothing to do with the system version.
JohnTheFarm3r said:
Code:
/*
* Your warranty is now void.
* I am not responsible for bricked devices thermonuclear war, or you getting fired because the alarm app failed
* Please do some research if you have any concerns about what this MOD does before flashing it
* YOU are choosing to make these modifications, don't point fingers at me if something goes wrong
*/
Ladies and gentlemen,
A small modification for you with great and HOT results.
Changes I made to the thermal configuration:
-The default Virtual-SKIN-based throttling threshold was starting at 39 Celsius, that was removed and the "first" threshold value is now 55 Celsius (at 55C it will HARD throttle, throttling is not completely eliminated here on purpose and at 55C it will behave the same as the default throttling mechanism at that temperature).
Keep in mind that SOC will throttle regardless of when it hits its own TjMax values so you don't need to worry about any "meltdown". lol
- Display won't switch to 60Hz anymore and neither will the maximal possible brightness be reduced as it is normally happening with stock throttling thresholds.
So far I'm using this on EvoX ROM but this should work basically on ANY ROM as the throttling is relying on the same file and as far as I managed to observe (amount of ROMs checked out) it's the same on those ROMs.
Pros:
- Throttling thresholds are drastically increased, meaning if you experienced any HIGH FPS drops during playing any "heavy" games, this will prevent that from happening to an extent and time.
- Any apps that rely on high processing power, will have more space and time to work without being affected by thermal throttling
Cons:
- Depending on your usage and what exactly you do on your phone, the device could get uncomfortably warm in your hands, and battery temperature will raise MORE than you got used to it since the SOC won't be throttled that fast as it does on the stock. Keep in mind that high battery temps are not healthy, and they will cause faster degradation. Degradation occurs anyways, the question is only how fast based on the temps the battery is being exposed to. Many OEMs allow such temps, so, Pixel 7 series with this mod isn't anything different compared to them.
- If you're a heavy "gamer" and play some games like Genshin, TOF, COD (at 120fps), etc... (you'll have a smoother experience (less FPS drops) based on slower/weaker throttling) but I recommend always using a Peltier cooler to keep that battery and the device as cool as possible (regardless if this phone or another).
Why did I create this mod?
I personally use an app called MotionCam Pro. It's basically a RAW video recording app that relies on HIGH processing power (it records RAW DNG frames) and it heats up the device pretty fast, well, Pixel 6/Pro hits the throttling threshold really fast and it's causing the recording to drop A LOT of frames to a point that the footage recorded is not "usable".
With this mod, I can now shoot RAW videos for longer periods with almost no dropped frames and under higher ambient temps. Yes, the phone warms up much more, but it does the JOB for me and that's all that matters to me anyway. I don't care if I'll need to replace my battery after 1 year instead of 2 years because I lost maybe 15-20% of the battery capacity (I upgrade my phones almost yearly).
Have fun frying eggs on your phone.
Installation
- Flash via Magisk
- Reboot your device
- Enjoy
Click to expand...
Click to collapse
This module has done wonders for the flagship experience of pixel 6 pro but after flashing this charging speed has gone total whacked . Normally pixel 6 pro would charge around 23W with screen turned off but after flashing this module the device charges around 9w max with screen turned off and with screen on it charges around 3w !!! Literally took 3.5 hours to charge with just music playing in background. I think it has someone to do with thermal threshold mismatch between charging and non-charging state . Changing the charging state thermal threshold to non charging thermal threshold should fix this behavior. I tried making my own module with this file but got bootloops . Can you a similar module for charging ?
Mahbubur Rahman Siam said:
This module has done wonders for the flagship experience of pixel 6 pro but after flashing this charging speed has gone total whacked . Normally pixel 6 pro would charge around 23W with screen turned off but after flashing this module the device charges around 9w max with screen turned off and with screen on it charges around 3w !!! Literally took 3.5 hours to charge with just music playing in background. I think it has someone to do with thermal threshold mismatch between charging and non-charging state . Changing the charging state thermal threshold to non charging thermal threshold should fix this behavior. I tried making my own module with this file but got bootloops . Can you a similar module for charging ?
Click to expand...
Click to collapse
What cable/charger do you use?
I use a 100w rated Basesus C to C cable, with a 120w Basesus Power Supply, and my charge time is around 40 minutes from 30-40 percent with this mod installed.
I know SOME cables/chargers can be a littttttleeee bit touchy when it comes to power mods.
What is really annoying is the premature current limit. I use Xiaomi GaN-33W charger + CtoC cable/ Up to 6A cable. When the device is low temperature and low battery, the current of the rechargeable battery can reach 4.5A and the power reaches 20W +. However, once the temperature rises slightly(about 39℃?), or the battery reaches about 65+, everything will deteriorate, and the current will drop sharply, with less than 3A remaining, and only 2A when it reaches 80 At this time, the power is only about 10W. The worst thing is that once the battery is higher than 90, the charging current will hover at 1A or even lower. You know that my Xiaomi 11X (4500mAh / Up to 33w) which only need 47 minutes to charge from 0 to 100, a huge gap, right?Google do a bad work for their phone.
Gytole said:
What cable/charger do you use?
I use a 100w rated Basesus C to C cable, with a 120w Basesus Power Supply, and my charge time is around 40 minutes from 30-40 percent with this mod installed.
I know SOME cables/chargers can be a littttttleeee bit touchy when it comes to power mods.
Click to expand...
Click to collapse
Gytole said:
What cable/charger do you use?
I use a 100w rated Basesus C to C cable, with a 120w Basesus Power Supply, and my charge time is around 40 minutes from 30-40 percent with this mod installed.
I know SOME cables/chargers can be a littttttleeee bit touchy when it comes to power mods.
Click to expand...
Click to collapse
Stock google charger with stock cable .
I made some changes to thermal file to fix charging throttling as well . Now charging won't get throttled because of temperature. Phone charges at full speed regardless of temperature I also made TEST file to disable throttling related to TJmax . Let me know if there are any issues.
Mahbubur Rahman Siam said:
I made some changes to thermal file to fix charging throttling as well . Now charging won't get throttled because of temperature. Phone charges at full speed regardless of temperature I also made TEST file to disable throttling related to TJmax . Let me know if there are any issues.
Click to expand...
Click to collapse
So I want to keep the temperature control instead of disabling it which one should I use?
Juuuuune said:
So I want to keep the temperature control instead of disabling it which one should I use?
Click to expand...
Click to collapse
The one without the word "TEST"
TeeJae360 said:
The one without the word "TEST"
Click to expand...
Click to collapse
Thanks
Mahbubur Rahman Siam said:
You need a cooler for that . Also cpu will thermal throttle regardless of outside temperature as soon as it hits internal TJ max value . Your best bet is to use a aluminum foil inside your case to help with heat dissipation
Click to expand...
Click to collapse
would aluminium foil actually help?
Mahbubur Rahman Siam said:
I made some changes to thermal file to fix charging throttling as well . Now charging won't get throttled because of temperature. Phone charges at full speed regardless of temperature I also made TEST file to disable throttling related to TJmax . Let me know if there are any issues.
Click to expand...
Click to collapse
Would love to have one where it throttles MORE to keep device cooler for those who don't want more heat, basically the opposite of what you already have