Develop Bugs

MSM tool 7T (need testers)

WARNING!
I take no responsibility for what you do with your device.
NOTE: REFER TO @corey103 's POST #4 for more INFORMATION!!!!!!
This is MSM Tool for the 7T. This was sent to me for my T-Mobile variant but I guess OnePlus sent the wrong one.
I am unable to test it myself so, have at it... AGAIN this is not for T-Mobile.
Download Qualcomm driver from POST #4
MSM & ROM
https://mega.nz/#F!3p1RRQyI!H0ClCqrrNFLklgraSdogCQ

I'm downloading and working on it right now. The L2 Drivers should be easy to install, they just need to be manually installed instead of installing like you would with an executable.

falconmoonpunch said:
WARNING!
I take no responsibility for what you do with your device.
This is MSM Tool for the 7T on T-Mobile, I can't get my phone to go into EDL and I'm not really sure how to set up these drivers I think that's why I can't get my laptop to read it, so to each their own and if you know what you're doing, EVEN BETTER!
Install the L2 drivers first(don't ask me how lol)
https://mega.nz/#F!2sNQkYqQ!w1VODlhyvVFHLL9C70GKAQ
MSM & TMobile ROM
https://mega.nz/#F!3p1RRQyI!H0ClCqrrNFLklgraSdogCQ
If anybody can get the drivers working and get their phone recognized and successfully use MSM Tool just put it in the thread and I will update the post
Click to expand...
Click to collapse
Great work, kind sir! I'm downloading as we speak. I will report back with anything, no matter how small or big. #xda
Again, thanks for putting this together! Appreciate it!:good:

I was able to get my phone connected and plugged in.
https://i.imgur.com/3i3LT2A.png
You need to install the below driver to have your phone get connected.
https://mega.nz/#!7411jKpY!HutHXS6tSf9derk8d8fN5SjX8v5uKkKT41uBBfqGmpE
Here's the guide to get your phone connected and able to be restored (Note that I did NOT restore my phone via this tool so I did not test to make sure the image works)
1) Download the T-Mobile & MSM tool above (don't worry about L2 drivers)
2) Install the attached Qualcom driver. (Just keep clicking next, use default settings)
3) Run MSM tool
4) On phone (After shutting it down completely), hold the volume buttons and plug it in. You should hear your phone disconnect and then reconnect. When you hear it reconnect, click "Enum" and your phone should be listed as "Connected". Do NOT let go to the volume keys until you press Start.
5) Once the process starts, it will take about 5 minutes.
Let me know if you guys have any questions.

Great work ! Thank you

corey103 said:
I was able to get my phone connected and plugged in.
https://i.imgur.com/3i3LT2A.png
You need to install the below driver to have your phone get connected.
https://mega.nz/#!7411jKpY
Here's the guide to get your phone connected and able to be restored (Note that I did NOT restore my phone via this tool so I did not test to make sure the image works)
1) Download the T-Mobile & MSM tool above (don't worry about L2 drivers)
2) Install the attached Qualcom driver. (Just keep clicking next, use default settings)
3) Run MSM tool
4) On phone (After shutting it down completely), hold the volume buttons and plug it in. You should hear your phone disconnect and then reconnect. When you hear it reconnect, click "Enum" and your phone should be listed as "Connected". Do NOT let go to the volume keys until you press Start.
5) Once the process starts, it will take about 5 minutes.
Let me know if you guys have any questions.
Click to expand...
Click to collapse
I will update the post in a bit

I can't wait to go home and test it out. Thanks guys
Sent from my [device_name] using XDA-Developers Legacy app

corey103 said:
I was able to get my phone connected and plugged in.
https://i.imgur.com/3i3LT2A.png
You need to install the below driver to have your phone get connected.
https://mega.nz/#!7411jKpY!HutHXS6tSf9derk8d8fN5SjX8v5uKkKT41uBBfqGmpE
Here's the guide to get your phone connected and able to be restored (Note that I did NOT restore my phone via this tool so I did not test to make sure the image works)
1) Download the T-Mobile & MSM tool above (don't worry about L2 drivers)
2) Install the attached Qualcom driver. (Just keep clicking next, use default settings)
3) Run MSM tool
4) On phone (After shutting it down completely), hold the volume buttons and plug it in. You should hear your phone disconnect and then reconnect. When you hear it reconnect, click "Enum" and your phone should be listed as "Connected". Do NOT let go to the volume keys until you press Start.
5) Once the process starts, it will take about 5 minutes.
Let me know if you guys have any questions.
Click to expand...
Click to collapse
I just reread what the OP said. The link in the original post is NOT for the T-Mobile variant or is that a mistake?
Sent from my [device_name] using XDA-Developers Legacy app

little strange
sorry but i was not able to download from mega.nz server. the file is too large, mega.nz has a transfer limit.
the file includes downloadtool version 4 but in your screenshot its version 5. is there an alternative download? thank you.

This is to convert TMobile version to international correct? If so, is there a way to get back to stock TMobile if something goes wrong?

dorianstgt said:
the file includes downloadtool version 4 but in your screenshot its version 5. is there an alternative download? thank you.
Click to expand...
Click to collapse
Seconding this: looks like the tool we got is for version 4 which does not recognize the Target ID of the OP7T Tmo variant.
I suppose we could attempt to use something like Cheat Engine to manipulate the check, but it would be easier to patch the check out or grab it in an upload if you have it.
Could we get an upload for MSMDT 5.0? Seems like using the image included with the download will likely work so the tool is all we need now.

Is there a difference between the international and European model?

I know other people who have downloaded it without an issue, this is for international, upon investigating OnePlus sent me the wrong package. they did this to another person as well but there are developers looking into this and hopefully we will have a way to convert sooner than later I believe we just need the actual T-Mobile package for msm... I'm not 100% sure

Hopefully that is the case, I myself do not have MSM DT 5.0 I only have these downloads which is what's in the post.
piersonj said:
Seconding this: looks like the tool we got is for version 4 which does not recognize the Target ID of the OP7T Tmo variant.
I suppose we could attempt to use something like Cheat Engine to manipulate the check, but it would be easier to patch the check out or grab it in an upload if you have it.
Could we get an upload for MSMDT 5.0? Seems like using the image included with the download will likely work so the tool is all we need now.
Click to expand...
Click to collapse

when I tried using this to flash with my TMobile 7T I got a Device doesn't match Image error or something like that.
piersonj said:
Seconding this: looks like the tool we got is for version 4 which does not recognize the Target ID of the OP7T Tmo variant.
I suppose we could attempt to use something like Cheat Engine to manipulate the check, but it would be easier to patch the check out or grab it in an upload if you have it.
Could we get an upload for MSMDT 5.0? Seems like using the image included with the download will o work so the tool is all we need now.
Click to expand...
Click to collapse

Can I use this on a bricked European OP7T?

falconmoonpunch said:
when I tried using this to flash with my TMobile 7T I got a Device doesn't match Image error or something like that.
Click to expand...
Click to collapse
I am seeing this as well. MSM 5.0 also is checking for the model number, so HD1907 (US,Tmo) are not able to flash via this method.
When I get out of the office today I will spend a few hours trying to patch the application to ignore the model check and see if I can flash the O variant onto my HD1907.
Chiassard said:
Can I use this on a bricked European OP7T?
Click to expand...
Click to collapse
I don't see why not as long as you're still able to access the EDL mode. When the device is FULLY OFF, hold the volume buttons and plug the device in.
DO NOT LET GO OF THE BUTTONS YET.
As long as the Motorola EDL driver is installed the device should be read on COM3-7. Press Start and once MSM handshakes with the phone, let go of the buttons.
If your install fails, does not match the model, etc: Press and hold VolUp, VolDown AND Power for 15 second to reach the Fastboot driver.
Note: This will install the O variant on your phone. AFAIK there are only two variants: International (O) and India (I) but if there is an European version out there somewhere you should secure that image and use that to flash, otherwise you will be on the O variant after this flash.

piersonj said:
I am seeing this as well. MSM 5.0 also is checking for the model number, so HD1907 (US,Tmo) are not able to flash via this method.
When I get out of the office today I will spend a few hours trying to patch the application to ignore the model check and see if I can flash the O variant onto my HD1907.
I don't see why not as long as you're still able to access the EDL mode. When the device is FULLY OFF, hold the volume buttons and plug the device in.
DO NOT LET GO OF THE BUTTONS YET.
As long as the Motorola EDL driver is installed the device should be read on COM3-7. Press Start and once MSM handshakes with the phone, let go of the buttons.
If your install fails, does not match the model, etc: Press and hold VolUp, VolDown AND Power for 15 second to reach the Fastboot driver.
Note: This will install the O variant on your phone. AFAIK there are only two variants: International (O) and India (I) but if there is an European version out there somewhere you should secure that image and use that to flash, otherwise you will be on the O variant after this flash.
Click to expand...
Click to collapse
Did you ever figure out how to flash this unto the T-Mobile variant?
Sent from my [device_name] using XDA-Developers Legacy app

OuncE718 said:
Did you ever figure out how to flash this unto the T-Mobile variant?
Click to expand...
Click to collapse
Without the tool being modified, its currently unable to flash to TMobile.

modify the MSM tool, maybe we can use the one on Oneplus 7PRO and patched the ROM???

Question Soft Bricked T-Mobile OnePlus 9 Pro

So, I soft bricked my TMO OP9P. I can still access Fastboot but can't access anything else. After leaving fastboot, when the phone is rebooting, I just get a black screen.
On plugging it in, It shows up in ADB as unauthorized, and with no prompts to authorize, I can't get any further.
Any ideas?

I did that to an HTC U11 once - Never got it recovered, had to toss it...
Never dared relock a bootloader since...

I had the same thing happen to me.
The only thing that worked for me is to boot recovery and wipe system. Good luck

Jhoopes517 said:
So, I soft bricked my TMO OP9P. I can still access Fastboot but can't access anything else. After leaving fastboot, when the phone is rebooting, I just get a black screen.
On plugging it in, It shows up in ADB as unauthorized, and with no prompts to authorize, I can't get any further.
Any ideas?
Click to expand...
Click to collapse
i have the same problem let me know if you figure out a way around this !

For all of you having this issue, simply use the msm for your respective device by unplugging your phone, select power off, enter edl mode with cable plugged in and run the tool. I know another solution, but please PM me if this one doesn't work.

I had this issue as well, but you better not have messed with the sensitive partitions without a backup, otherwise there's no way to repair it.

razercortex said:
For all of you having this issue, simply use the msm for your respective device by unplugging your phone, select power off, enter edl mode with cable plugged in and run the tool. I know another solution, but please PM me if this one doesn't work.
Click to expand...
Click to collapse
i cannot figure out how to run the msm tool properly it always throws an error message

KidSudo6969 said:
i cannot figure out how to run the msm tool properly it always throws an error message
Click to expand...
Click to collapse
what is the error message? Maybe you dont have the correct one.

Jhoopes517 said:
So, I soft bricked my TMO OP9P. I can still access Fastboot but can't access anything else. After leaving fastboot, when the phone is rebooting, I just get a black screen.
On plugging it in, It shows up in ADB as unauthorized, and with no prompts to authorize, I can't get any further.
Any ideas?
Click to expand...
Click to collapse
Here is the msm tool

This was fixed via MSM. But I had another issue come up where MSM doesn't work.

Jhoopes517 said:
This was fixed via MSM. But I had another issue come up where MSM doesn't work.
Click to expand...
Click to collapse
What do you mean doesnt work? What did it do?

its not responding at all. no boot loop, no logo, no nothing. just a blackscreen no matter how long i charge it or hold the buttons down.

Aleena1217 said:
its not responding at all. no boot loop, no logo, no nothing. just a blackscreen no matter how long i charge it or hold the buttons down.
Click to expand...
Click to collapse
Did you try booting your phone into EDL mode? Hold down both the volume buttons, and while holding them down, plug in the USB cable (Connect with the PC). If you're on Windows, check the device manager in the control panel, and check if the PC recognized the phone (you might need to install the drivers too).

ekin_strops said:
Did you try booting your phone into EDL mode? Hold down both the volume buttons, and while holding them down, plug in the USB cable (Connect with the PC). If you're on Windows, check the device manager in the control panel, and check if the PC recognized the phone (you might need to install the drivers too).
Click to expand...
Click to collapse
after installing driver it recognized it in EDL mode. Im also JUST seeing that this is for the 9 and not the 9 pro. im guessing thats the issue? ii cant believe i missed that

Aleena1217 said:
after installing driver it recognized it in EDL mode. Im also JUST seeing that this is for the 9 and not the 9 pro. im guessing thats the issue? ii cant believe i missed that
Click to expand...
Click to collapse
Yes, it's for the Pro, but the procedure is the same. A good thing is that EDL works. Now just grab the MSM Tool for your model and flash it.

ekin_strops said:
Yes, it's for the Pro, but the procedure is the same. A good thing is that EDL works. Now just grab the MSM Tool for your model and flash it.
Click to expand...
Click to collapse
thank you so much. msm is downloading now. while I have you, do you have a link for the 9 pro conversion files? id really like to get that xpan update finally...

ekin_strops said:
Did you try booting your phone into EDL mode? Hold down both the volume buttons, and while holding them down, plug in the USB cable (Connect with the PC). If you're on Windows, check the device manager in the control panel, and check if the PC recognized the phone (you might need to install the drivers too).
Click to expand...
Click to collapse
im sorry i just realized i jumped in the middle of a different thread. This happened while trying to flash tmobile oneplus 9 pro to global firmware and after trying to enter recovery mode. Im guessing it happened because the files are for one plus 9, so im looking for the files for a 9 pro conversion but only am finding msm tool downloads for conversion instead of flashbin files.

Aleena1217 said:
im sorry i just realized i jumped in the middle of a different thread. This happened while trying to flash tmobile oneplus 9 pro to global firmware and after trying to enter recovery mode. Im guessing it happened because the files are for one plus 9, so im looking for the files for a 9 pro conversion but only am finding msm tool downloads for conversion instead of flashbin files.
Click to expand...
Click to collapse
Before I jump to conclusions, could you explain exactly which model you have and what is your goal?

ekin_strops said:
Before I jump to conclusions, could you explain exactly which model you have and what is your goal?
Click to expand...
Click to collapse
i have the le 2127 from tmobile because i didnt know any better. i dont want to root or do anything crazy. I just want to be able to flash to global or eu firmware so i can upgrade as oneplus releases the updates and not be a year behind on tmobiles schedule. I have the sim and bootloader unlocked successfully. I started to flash to the one plus 9 firmware because i somehow missed that it did not say pro. So now my phone in unresponsive except for QDL 9008 mode. MSM tool recognizes it and begins to update it but then gets a param preload "device not image match" message in red and stops. So once i figure out how to get past that and get this set to factory, i want to properly flash it to global or eu, whichever is available, and upgrade it to the latest version.

Aleena1217 said:
i have the le 2127 from tmobile because i didnt know any better. i dont want to root or do anything crazy. I just want to be able to flash to global or eu firmware so i can upgrade as oneplus releases the updates and not be a year behind on tmobiles schedule. I have the sim and bootloader unlocked successfully. I started to flash to the one plus 9 firmware because i somehow missed that it did not say pro. So now my phone in unresponsive except for QDL 9008 mode. MSM tool recognizes it and begins to update it but then gets a param preload "device not image match" message in red and stops. So once i figure out how to get past that and get this set to factory, i want to properly flash it to global or eu, whichever is available, and upgrade it to the latest version.
Click to expand...
Click to collapse
Are you getting the mismatch on the global/eu MSM or are you trying to flash back to stock T-Mobile? You're getting a mismatch because you're most likely using the wrong version of a firmware (msm).

Question Bricked Mi PAD 5 PRO CN

Hello, i tried helping my grandmother by installing the global rom on her Xiaomi Mi Pad 5 Pro WIFI, however as it didn't work i tried forcing the rom onto it by flashing it manually using fastboot, after this i am not able to power it on, or reach fastboot. It's just a black screen it doesn't matter how long you hold the power key it's just completely black.. Is there something i can do???? Or is it completely destroyed?

Global ROM is not available for PRO version. Probably you flashed a wrong one. Try flashing back the CN one matches your model.

mkcs said:
Global ROM is not available for PRO version. Probably you flashed a wrong one. Try flashing back the CN one matches your model.
Click to expand...
Click to collapse
Ahh thats the thing, it won't even power on now, i cannot even access fastboot

desyncccccccc said:
Ahh thats the thing, it won't even power on now, i cannot even access fastboot
Click to expand...
Click to collapse
long press "Volume Down" + "Power" for a few seconds at the same time and then release only"Power" once the fastboot logo appears, finally release "Volume Down" to enter the fastboot mode

Its for xiaomi mi5
Maybe helps
Is there anything I can do? Brick help
My Xiaomi mi5 does not turn on. No lights, fastboot is not accessible, resetting it does not do anything. Basically for any combination of buttons that I press, nothing happens and the screen stays black - it is completely dead. However, when I...
forum.xda-developers.com

Keyvannn said:
Its for xiaomi mi5
Maybe helps
Is there anything I can do? Brick help
My Xiaomi mi5 does not turn on. No lights, fastboot is not accessible, resetting it does not do anything. Basically for any combination of buttons that I press, nothing happens and the screen stays black - it is completely dead. However, when I...
forum.xda-developers.com
Click to expand...
Click to collapse
Yeah so the only problem with this is that mine won't even show up even though i have said drivers installed.. I'm starting to think it's hard bricked

Hello, yes same as me. The tablet are in the 9008 edl state when you put it on your computer. there are many flashing tools out there, the problem are the flash authentification from xiaomis side. i prepared a empty pc with windows 10 and loaded the last fastboot image. then i got a telegram contact from a russian guy who was able to use the xiaomi auth procedure, cost me 30 dollar and 3 days to find out this crap

Xiaomi needs a better way to unbrick its devices instead of Authorized Mi Accounts
Xiaomi has locked down the EDL mode on all of its devices, making it nigh impossible to unbrick a device without an Authorized Mi Account. Read on for more!
www.xda-developers.com

desyncccccccc said:
Hello, i tried helping my grandmother by installing the global rom on her Xiaomi Mi Pad 5 Pro WIFI, however as it didn't work i tried forcing the rom onto it by flashing it manually using fastboot, after this i am not able to power it on, or reach fastboot. It's just a black screen it doesn't matter how long you hold the power key it's just completely black.. Is there something i can do???? Or is it completely destroyed?
Click to expand...
Click to collapse
When it's plugged into the PC, is it recognised with "fastboot devices" or "adb devices"?
If it is you should be able to wipe with "fastboot -w" and start again.
Google detailed instructions.

mikefnz said:
When it's plugged into the PC, is it recognised with "fastboot devices" or "adb devices"?
If it is you should be able to wipe with "fastboot -w" and start again.
Google detailed instructions.
Click to expand...
Click to collapse
Unfortunately no, i do not get any response from fastboot whatsoever, there's no device detection in either fastboot or device manager. I even tried on my laptop which is brand new still no sign of life

fritzeman said:
Hello, yes same as me. The tablet are in the 9008 edl state when you put it on your computer. there are many flashing tools out there, the problem are the flash authentification from xiaomis side. i prepared a empty pc with windows 10 and loaded the last fastboot image. then i got a telegram contact from a russian guy who was able to use the xiaomi auth procedure, cost me 30 dollar and 3 days to find out this crap
Click to expand...
Click to collapse
Where would i be able to get in contact with someone like that??

desyncccccccc said:
Unfortunately no, i do not get any response from fastboot whatsoever, there's no device detection in either fastboot or device manager. I even tried on my laptop which is brand new still no sign of life
Click to expand...
Click to collapse
Try different cable & different pc usb slot?

Try flashing using * Xiaomi professional pro tools . Buy credit and all done,

mikefnz said:
Try different cable & different pc usb slot?
Click to expand...
Click to collapse
Unfortunately any cable/pc i try i get the same result, i'm debating wether i should just get a new one for her with global rom instead

desyncccccccc said:
Unfortunately any cable/pc i try i get the same result, i'm debating wether i should just get a new one for her with global rom instead
Click to expand...
Click to collapse
Don't give up yet!
Charge the tablet with another cable that you know works.
Make sure that you have the most up to date version of Platform Tools.
Make sure that when you're in the Command Prompt that you are in the Platform Tools folder.
Check connections with another device....

mikefnz said:
Don't give up yet!
Charge the tablet with another cable that you know works.
Make sure that you have the most up to date version of Platform Tools.
Make sure that when you're in the Command Prompt that you are in the Platform Tools folder.
Check connections with another device....
Click to expand...
Click to collapse
Hello again, i tried with all possible cables and or devices, somehow it still does not show up, i am rather confused and thinking that i might've broke it fully

desyncccccccc said:
Hello again, i tried with all possible cables and or devices, somehow it still does not show up, i am rather confused and thinking that i might've broke it fully
Click to expand...
Click to collapse
Buy an EDL Cable For Qualcomm 9008 Mode for deep flashing

desyncccccccc said:
Hello again, i tried with all possible cables and or devices, somehow it still does not show up, i am rather confused and thinking that i might've broke it fully
Click to expand...
Click to collapse
Have you got the most up to date version of Platform-tools installed and are you checking the connection from a CMD prompt in that Platform-tools folder?

mkcs said:
Buy an EDL Cable For Qualcomm 9008 Mode for deep flashing
Click to expand...
Click to collapse
Could you please link me one of those? I'm over in the EU so maybe they'll be fairly easy to find?

mikefnz said:
Have you got the most up to date version of Platform-tools installed and are you checking the connection from a CMD prompt in that Platform-tools folder?
Click to expand...
Click to collapse
Yeah, i've been doing all of that. I just now found out that there's an EDL cable specifically made for flashing in that mode

Question Bricked Poco F3 global :(

Ok, I might have ****ed this up really bad this time, I have flashed custom roms on my old device many times and once before on my Poco F3, so I was a bit over confident trying to flash the Elite ROM miui 14 following this not very detailed guide using orange fox:
EliteRomLite V14.0.22.12.8.DEV China DEV MIUI 14 A13 Released for PUBLIC!
Devices: Poco F3 / K40/...
www.elitedevelopment.com.pk
after formatting and flashing everything I tried to reboot ignoring the "no OS" warning (Big mistake). And now my phone doesn't boot, neither to the (non existing) OS neither to the fast boot screen.
If anyone can help I would be immensely grateful

Bata123 said:
Ok, I might have ****ed this up really bad this time, I have flashed custom roms on my old device many times and once before on my Poco F3, so I was a bit over confident trying to flash the Elite ROM miui 14 following this not very detailed guide using orange fox:
EliteRomLite V14.0.22.12.8.DEV China DEV MIUI 14 A13 Released for PUBLIC!
Devices: Poco F3 / K40/...
www.elitedevelopment.com.pk
after formatting and flashing everything I tried to reboot ignoring the "no OS" warning (Big mistake). And now my phone doesn't boot, neither to the (non existing) OS neither to the fast boot screen.
If anyone can help I would be immensely grateful
Click to expand...
Click to collapse
does it not boot to twrp?

Bata123 said:
Ok, I might have ****ed this up really bad this time, I have flashed custom roms on my old device many times and once before on my Poco F3, so I was a bit over confident trying to flash the Elite ROM miui 14 following this not very detailed guide using orange fox:
EliteRomLite V14.0.22.12.8.DEV China DEV MIUI 14 A13 Released for PUBLIC!
Devices: Poco F3 / K40/...
www.elitedevelopment.com.pk
after formatting and flashing everything I tried to reboot ignoring the "no OS" warning (Big mistake). And now my phone doesn't boot, neither to the (non existing) OS neither to the fast boot screen.
If anyone can help I would be immensely grateful
Click to expand...
Click to collapse
Hi, As 3zozHashim mentioned,
do you still have RECOVERY, i have been stuck in "No O/S installed" but after reboot has always automatically rebooted into Recovery.
You can enter Recovery manually by pressing and holding the Power + Volume up buttons and releasing the power button.
I have never lost FASTBOOT, if you still have recovery you could try reverting back to your old rom, can you connect to your pc.

I had this issue once and I've solved in TWRP (hope you may accessit!).
Try to reboot, from main screen, and switch to the other partition (if you don't know which one is the actually active, try first with B and after a failing reboot try with A)

no matter if I hold power button, or power + volume up, or power+ volume down the screen just stays black

You need to flash miui using an authorized account by paying someone with one of these accounts.

Where I can found someone with one of these accounts?

Since your phone appears to be hard bricked, you could try a patched firehose and flash a firmware yourself. I will link it if you want. Just a disclaimer, try it at your own risk since yours is the first hard bricked device I came across since I got the firehose file.

user0u said:
Since your phone appears to be hard bricked, you could try a patched firehose and flash a firmware yourself. I will link it if you want. Just a disclaimer, try it at your own risk since yours is the first hard bricked device I came across since I got the firehose file.
Click to expand...
Click to collapse
I would really enjoy if could link me the patched firehose

Bata123 said:
I would really enjoy if could link me the patched firehose
Click to expand...
Click to collapse
Here you go.
I do not know how to use it though. Maybe @cyanGalaxy can guide you through it?
EDIT: I tried it and it looks like it does not work.

user0u said:
Here you go.
I do not know how to use it though. Maybe @cyanGalaxy can guide you through it?
Click to expand...
Click to collapse
I've found tutorials on the internet using miflash but I only get errors

Bata123 said:
I've found tutorials on the internet using miflash but I only get errors
Click to expand...
Click to collapse
I don't think it can be used with miflash. You need something like QFIL.

Bata123 said:
I've found tutorials on the internet using miflash but I only get errors
Click to expand...
Click to collapse
Hi,
Was your F3 recognised in Device manager, if so was it listed as Qualcomm HS-USB QDLoader 9008 , also have you tried to hold down the power button for 10 seconds

user0u said:
I don't think it can be used with miflash. You need something like QFIL.
Click to expand...
Click to collapse
I had to use Qfil to install Orangerfox patched Recovery on my LG G7 "many times"
Entering 9008 mode was easy thou, i was done by using a combination of keys at reboot, it looks like MIUI is a different beast.

I was tring qfil this afternoon but I got a bunch of errors, some I found how to fix online (like sahara fail and "The system cannot find the specified file") but not the "FHLoader Fail: Process Fail." tried a bunch of Qfil versions and nothing unfortunately. Apperntly I will have to pay someone on a service center to fix it

Bata123 said:
I was tring qfil this afternoon but I got a bunch of errors, some I found how to fix online (like sahara fail and "The system cannot find the specified file") but not the "FHLoader Fail: Process Fail." tried a bunch of Qfil versions and nothing unfortunately. Apperntly I will have to pay someone on a service center to fix it
Click to expand...
Click to collapse
Sorry to hear that. Well, it was worth a try at least.
I wonder what that error means. Does it mean the patched firehose is not working or something else. Hmmm...
Also I read that you need to set "device type" to ufs in configuration. This is essential.

user0u said:
Sorry to hear that. Well, it was worth a try at least.
I wonder what that error means. Does it mean the patched firehose is not working or something else. Hmmm...
Also I read that you need to set "device type" to ufs in configuration. This is essential.
Click to expand...
Click to collapse
This guy has the same problem as you. I don't know if the video doesn't work for you, but it's not hard to try.

vickmen said:
This guy has the same problem as you. I don't know if the video doesn't work for you, but it's not hard to try.
Click to expand...
Click to collapse
This only works with MediaTek phones.

Bata123 said:
I was tring qfil this afternoon but I got a bunch of errors, some I found how to fix online (like sahara fail and "The system cannot find the specified file") but not the "FHLoader Fail: Process Fail." tried a bunch of Qfil versions and nothing unfortunately. Apperntly I will have to pay someone on a service center to fix it
Click to expand...
Click to collapse
Does your phone show up in Windows Device Manager as "Qualcomm 9008" ?
The EDL Mode of the Xiaomi Poco F3 is locked to authorised Xiaomi Service Centres only...
The Poco F3 modified MBN (Firehose) file that the other guy here posted, *may* work, to circumvent the authorisation required. I haven't tried it myself because my phone's not bricked at the moment
I did brick my Poco F3 once last year, tried QPST/QFIL. I couldn't find *any* modified Firehose back then so QPST/QFIL didn't work. {Mod edit. Oswald Boelcke}
Another thing to mention, my phone did not go into EDL Mode automatically, I had to open the back of my phone (took a lot of patience and carefulness but was flawless!), and short 2 Test-points on my phone.
In the end it all worked out well for me.
The Qualcomm SOC, when it detects that the bootloader is completely f***ed, will boot into EDL Mode instead. When you power on your device, the Qualcomm SOC first tries to boot Android's Bootloader, if it detects that the bootloader is erased (or similar), it will sidetrack to the Qualcomm read-only EDL Mode.
But there are times where it's not erased but only broken/damaged, and in that case the Qualcomm SOC doesn't auto-boot to EDL Mode, but instead, you're "invisibly" stuck in a broken/damaged Android bootloader.
About the modified Firehose file and QPST/QFIL: You have to put it into the Fastboot ROM-folder where the other ROM images are... The Official MIUI Fastboot ROM can also be used for EDL Mode (QPST/QFIL/Mi Flash)...
I think you CAN actually use Mi Flash for EDL Mode. What happens when you try to flash in EDL Mode, by default, is that a popup will show asking you to login with a Xiaomi Service Account (which of course you don't have).
So.. you can try Mi Flash with the Modified Firehose, or QPST/QFIL...
Otherwise I can give you contact details about the third party service that would flash your phone in EDL Mode (the same that I used last year).
I can not mention it here on XDA tho... Guidelines.
Or, if it costs less to go to a Xiaomi Service Centre (or sending it in), then do that. Maybe you can, with warranty.
Here in Germany I think there are very very few Xiaomi Service Centres, and we have to send in, I think...

OK I have to plead guilty to something...
I bricked my Poco F3 twice actually.
But the very first time when it happened (2 months after I bought the device hahah), I had no clue about Qualcomm EDL Mode and the other technicalities related to Xiaomi and Qualcomm, so I returned it to Amazon and said "Software borked due to OS update", and they sent me a free replacement.
It was a bad move of course, but I was without a phone and had nightmares from that occurence. The second time I made my hands dirty (so to speak ;D ), and I fixed it!

Question Not able to turn on phone (Xiaomi Mi 11 Lite 5G NE lisa)

Hey guys,
I wanted to try out a custom rom, so I unlocked the bootloader of my phone and installed orange fox recovery successfully. Since I somehow uninstalled MIUI in the process of installing orange fox, I downloaded a .zip file containing a custom rom for my device (its called Cherish OS, but that shouldn't be the problem here). Since I wiped the whole internal storage of my phone, I used the "adb push" command to get the according file onto my Xiaomi Mi 11 Lite 5G NE. After installing the .zip file using orange fox, I pressed "reboot". However, my phone just shut down and did not reboot as it was supposed to do. I tried holding down the power button for at least 10 seconds to get it to boot, however the screen remained completely black. Even pressing volume down and power button did not help, the same with power up and power button. Whatever I tried, the screen remained black (no bootlogo etc).
I then charged up my phone, but that did not solve the issue either (before installation it had 47%, so I doubt that the battery died during installation as its a brand new phone).
One thing to notice is that my Windows PC makes a sound when I plug my phone into my Computer, as if I has plugged in a harddrive or something. But I can't get it to show up in the file explorer or with "fastboot devices". So clearly something happens when I turn on my phone, but the screen remains off.
I really hope you can help me to bring my (brandnew) phone back to life!
Thanks in advance.
P.S.: I used an ampmeter to check the charging current, its only around 60mA even though I used the official 33W charging brick.

another hard brick... you should have followed official instructions on how to flash the ROM...

PaperKing13 said:
another hard brick... you should have followed official instructions on how to flash the ROM...
Click to expand...
Click to collapse
So there is absolutely no way of getting it back to life? Can't I flash new firmware of something?
Edit: Okay, so I guess its in EDL mode now, any tips/tutorials on how to flash new firmware?

Lupus3141 said:
So there is absolutely no way of getting it back to life? Can't I flash new firmware of something?
Edit: Okay, so I guess its in EDL mode now, any tips/tutorials on how to flash new firmware?
Click to expand...
Click to collapse
Enter "Fastboot" mode and flash original Firmware from here https://xiaomifirmwareupdater.com/firmware/agate/ ! You can also use Miflash

4rch0 said:
Enter "Fastboot" mode and flash original Firmware from here https://xiaomifirmwareupdater.com/firmware/agate/ ! You can also use Miflash
Click to expand...
Click to collapse
Thank you for your reply, but unfortunately my phone is completely fried. I can't access fastboot mode. Any ideas how to fix this? As I have already mentioned, I guess its in EDL mode and to my knowledge only certified repair shops (or scammy internet advertisments) can resolve this issue.
Thanks in advance!

Lupus3141 said:
Thank you for your reply, but unfortunately my phone is completely fried. I can't access fastboot mode. Any ideas how to fix this? As I have already mentioned, I guess its in EDL mode and to my knowledge only certified repair shops (or scammy internet advertisments) can resolve this issue.
Thanks in advance!
Click to expand...
Click to collapse
How to Exit EDL Mode [Emergency Download Mode] in Android
In this comprehensive tutorial, we will show you the detailed steps to exit the EDL Mode (Emergency Download Mode) in Android
www.droidwin.com

4rch0 said:
How to Exit EDL Mode [Emergency Download Mode] in Android
In this comprehensive tutorial, we will show you the detailed steps to exit the EDL Mode (Emergency Download Mode) in Android
www.droidwin.com
Click to expand...
Click to collapse
[GUIDE] How to bypass authentication and flash in EDL with NO auth for FREE
Thanks to: chaosmaster / k4y0z: GitHub / XDA xyzz / xyz`: GitHub / XDA Dinolek: GitHub / XDA How to install: 1. Download the attached file: VD171_MTK-bypass.zip. 2. Extract the file and open the folder. 3. Run and install python...
forum.xda-developers.com

The tutorial seems to just work with Mediatek processors, however my phone uses Qualcom. Any other links?

Lupus3141 said:
So there is absolutely no way of getting it back to life? Can't I flash new firmware of something?
Edit: Okay, so I guess its in EDL mode now, any tips/tutorials on how to flash new firmware?
Click to expand...
Click to collapse
There's no tutorial unfortunately... You'll have to go to an Authorized Xiaomi Service Center.