Hello, i tried helping my grandmother by installing the global rom on her Xiaomi Mi Pad 5 Pro WIFI, however as it didn't work i tried forcing the rom onto it by flashing it manually using fastboot, after this i am not able to power it on, or reach fastboot. It's just a black screen it doesn't matter how long you hold the power key it's just completely black.. Is there something i can do???? Or is it completely destroyed?
Global ROM is not available for PRO version. Probably you flashed a wrong one. Try flashing back the CN one matches your model.
mkcs said:
Global ROM is not available for PRO version. Probably you flashed a wrong one. Try flashing back the CN one matches your model.
Click to expand...
Click to collapse
Ahh thats the thing, it won't even power on now, i cannot even access fastboot
desyncccccccc said:
Ahh thats the thing, it won't even power on now, i cannot even access fastboot
Click to expand...
Click to collapse
long press "Volume Down" + "Power" for a few seconds at the same time and then release only"Power" once the fastboot logo appears, finally release "Volume Down" to enter the fastboot mode
Its for xiaomi mi5
Maybe helps
Is there anything I can do? Brick help
My Xiaomi mi5 does not turn on. No lights, fastboot is not accessible, resetting it does not do anything. Basically for any combination of buttons that I press, nothing happens and the screen stays black - it is completely dead. However, when I...
forum.xda-developers.com
Keyvannn said:
Its for xiaomi mi5
Maybe helps
Is there anything I can do? Brick help
My Xiaomi mi5 does not turn on. No lights, fastboot is not accessible, resetting it does not do anything. Basically for any combination of buttons that I press, nothing happens and the screen stays black - it is completely dead. However, when I...
forum.xda-developers.com
Click to expand...
Click to collapse
Yeah so the only problem with this is that mine won't even show up even though i have said drivers installed.. I'm starting to think it's hard bricked
Hello, yes same as me. The tablet are in the 9008 edl state when you put it on your computer. there are many flashing tools out there, the problem are the flash authentification from xiaomis side. i prepared a empty pc with windows 10 and loaded the last fastboot image. then i got a telegram contact from a russian guy who was able to use the xiaomi auth procedure, cost me 30 dollar and 3 days to find out this crap
Xiaomi needs a better way to unbrick its devices instead of Authorized Mi Accounts
Xiaomi has locked down the EDL mode on all of its devices, making it nigh impossible to unbrick a device without an Authorized Mi Account. Read on for more!
www.xda-developers.com
desyncccccccc said:
Hello, i tried helping my grandmother by installing the global rom on her Xiaomi Mi Pad 5 Pro WIFI, however as it didn't work i tried forcing the rom onto it by flashing it manually using fastboot, after this i am not able to power it on, or reach fastboot. It's just a black screen it doesn't matter how long you hold the power key it's just completely black.. Is there something i can do???? Or is it completely destroyed?
Click to expand...
Click to collapse
When it's plugged into the PC, is it recognised with "fastboot devices" or "adb devices"?
If it is you should be able to wipe with "fastboot -w" and start again.
Google detailed instructions.
mikefnz said:
When it's plugged into the PC, is it recognised with "fastboot devices" or "adb devices"?
If it is you should be able to wipe with "fastboot -w" and start again.
Google detailed instructions.
Click to expand...
Click to collapse
Unfortunately no, i do not get any response from fastboot whatsoever, there's no device detection in either fastboot or device manager. I even tried on my laptop which is brand new still no sign of life
fritzeman said:
Hello, yes same as me. The tablet are in the 9008 edl state when you put it on your computer. there are many flashing tools out there, the problem are the flash authentification from xiaomis side. i prepared a empty pc with windows 10 and loaded the last fastboot image. then i got a telegram contact from a russian guy who was able to use the xiaomi auth procedure, cost me 30 dollar and 3 days to find out this crap
Click to expand...
Click to collapse
Where would i be able to get in contact with someone like that??
desyncccccccc said:
Unfortunately no, i do not get any response from fastboot whatsoever, there's no device detection in either fastboot or device manager. I even tried on my laptop which is brand new still no sign of life
Click to expand...
Click to collapse
Try different cable & different pc usb slot?
Try flashing using * Xiaomi professional pro tools . Buy credit and all done,
mikefnz said:
Try different cable & different pc usb slot?
Click to expand...
Click to collapse
Unfortunately any cable/pc i try i get the same result, i'm debating wether i should just get a new one for her with global rom instead
desyncccccccc said:
Unfortunately any cable/pc i try i get the same result, i'm debating wether i should just get a new one for her with global rom instead
Click to expand...
Click to collapse
Don't give up yet!
Charge the tablet with another cable that you know works.
Make sure that you have the most up to date version of Platform Tools.
Make sure that when you're in the Command Prompt that you are in the Platform Tools folder.
Check connections with another device....
mikefnz said:
Don't give up yet!
Charge the tablet with another cable that you know works.
Make sure that you have the most up to date version of Platform Tools.
Make sure that when you're in the Command Prompt that you are in the Platform Tools folder.
Check connections with another device....
Click to expand...
Click to collapse
Hello again, i tried with all possible cables and or devices, somehow it still does not show up, i am rather confused and thinking that i might've broke it fully
desyncccccccc said:
Hello again, i tried with all possible cables and or devices, somehow it still does not show up, i am rather confused and thinking that i might've broke it fully
Click to expand...
Click to collapse
Buy an EDL Cable For Qualcomm 9008 Mode for deep flashing
desyncccccccc said:
Hello again, i tried with all possible cables and or devices, somehow it still does not show up, i am rather confused and thinking that i might've broke it fully
Click to expand...
Click to collapse
Have you got the most up to date version of Platform-tools installed and are you checking the connection from a CMD prompt in that Platform-tools folder?
mkcs said:
Buy an EDL Cable For Qualcomm 9008 Mode for deep flashing
Click to expand...
Click to collapse
Could you please link me one of those? I'm over in the EU so maybe they'll be fairly easy to find?
mikefnz said:
Have you got the most up to date version of Platform-tools installed and are you checking the connection from a CMD prompt in that Platform-tools folder?
Click to expand...
Click to collapse
Yeah, i've been doing all of that. I just now found out that there's an EDL cable specifically made for flashing in that mode
Related
Hello everyone, I have rooted and used my MI 9 SE for at atbout one month normally. Today, phone discharged and since that time after charged, Iam not able to boot everywhere, except "fastboot screen", while trying anything like (power and +; power and - etc..) phone always vibrates and boots into fastboot screen.
unfortunatelly, I so far I havent managed to connect it to PC and reflash anything, it is not visible and does nothing, when try to connect to PC (tried all USB ports etc).
Also MI flash tool doesnt do anything with that, so, any idea or solution?
Thank you, sorry for my english.
MTAVALI said:
Hello everyone, I have rooted and used my MI 9 SE for at atbout one month normally. Today, phone discharged and since that time after charged, Iam not able to boot everywhere, except "fastboot screen", while trying anything like (power and +; power and - etc..) phone always vibrates and boots into fastboot screen.
unfortunatelly, I so far I havent managed to connect it to PC and reflash anything, it is not visible and does nothing, when try to connect to PC (tried all USB ports etc).
Also MI flash tool doesnt do anything with that, so, any idea or solution?
Thank you, sorry for my english.
Click to expand...
Click to collapse
So you can boot into fastboot but somehow your PC still won't see the phone?
xXPhoenixXx said:
So you can boot into fastboot but somehow your PC still won't see the phone?
Click to expand...
Click to collapse
Yeap
MTAVALI said:
Yeap
Click to expand...
Click to collapse
Are you using USB 2.0 or USB 3.0?
Edit: there is this: https://www.xiaomitool.com/V2/
I used this to unlock my bootloader, though I've noticed that it has "unbrick" feature, whatever that may be, haven't tried it before, see if it helps. If you cannot get fastboot working, you're in deep sh*t.
I'm afraid I can't help beyond this, I never bricked a phone badly enough to ruin fastboot, so at this point I'm clueless what you can do other than returning the phone. They unbrick it for you and the warranty wont be void but you'll have to pay.
xXPhoenixXx said:
Are you using USB 2.0 or USB 3.0?
Edit: there is this: https://www.xiaomitool.com/V2/
I used this to unlock my bootloader, though I've noticed that it has "unbrick" feature, whatever that may be, haven't tried it before, see if it helps. If you cannot get fastboot working, you're in deep sh*t.
I'm afraid I can't help beyond this, I never bricked a phone badly enough to ruin fastboot, so at this point I'm clueless what you can do other than returning the phone. They unbrick it for you and the warranty wont be void but you'll have to pay.
Click to expand...
Click to collapse
OK will try.
Thank U
MTAVALI said:
Hello everyone, I have rooted and used my MI 9 SE for at atbout one month normally. Today, phone discharged and since that time after charged, Iam not able to boot everywhere, except "fastboot screen", while trying anything like (power and +; power and - etc..) phone always vibrates and boots into fastboot screen.
unfortunatelly, I so far I havent managed to connect it to PC and reflash anything, it is not visible and does nothing, when try to connect to PC (tried all USB ports etc).
Also MI flash tool doesnt do anything with that, so, any idea or solution?
Thank you, sorry for my english.
Click to expand...
Click to collapse
Have you tried to flash from fastboot with MiFlash?
Download here fastboot image and extract it, than Google for MiFlash ver. 2016.08.30 and just unbirck your phone...
sHAKaJaada said:
Have you tried to flash from fastboot with MiFlash?
Download here fastboot image and extract it, than Google for MiFlash ver. 2016.08.30 and just unbirck your phone...
Click to expand...
Click to collapse
Yes that looks working ..) Very thanks
After booting you have to reboot to bootloader and reflash twrp (if you need them) and if you want to flash some dev rom wipe: DALVIK, CACHE and DATA ONLY from WIPE menu, NOT System, than flash dev rom if you like ...
Sent from my Mi 9 SE using XDA Labs
Hey,
I'm working for a farming company as IT, and one of the employees left the Company with a locked phone. Xiaomi has a pattern lock.
What I tried;
Factory reset,
ADB devices do not see any (when trying unlocking bootloader)
fastboot boot twrp(got msg "device is locked")
Mi Reset, but ADB doesn't see any devices
Any ideas?
used Android fastboot Reset tool and got msg "device is locked"
gnide93 said:
Hey,
I'm working for a farming company as IT, and one of the employees left the Company with a locked phone. Xiaomi has a pattern lock.
What I tried;
Factory reset,
ADB devices do not see any (when trying unlocking bootloader)
fastboot boot twrp(got msg "device is locked")
Mi Reset, but ADB doesn't see any devices
Any ideas?
Click to expand...
Click to collapse
Hey im the maintainer of one of the custom roms for this phone you can look up on google how to use the test points if you short those with a tweezers or something it will go into edl and that should allow you to use miflash and completly reflash the stock rom.
Why don't you call him lol. Let's be honest you thought it was an iPhone X or something and stole it right?
lacia-chan said:
Hey im the maintainer of one of the custom roms for this phone you can look up on google how to use the test points if you short those with a tweezers or something it will go into edl and that should allow you to use miflash and completly reflash the stock rom.
Click to expand...
Click to collapse
Hey,
Thank your support, but the phone is still on the warranty and I can not do such operations. Strictly NO NO.. Would you have any more ideas?
gnide93 said:
Hey,
Thank your support, but the phone is still on the warranty and I can not do such operations. Strictly NO NO.. Would you have any more ideas?
Click to expand...
Click to collapse
Take them to the official service center, if there's one?
RFD80M-75679 said:
Take them to the official service center, if there's one?
Click to expand...
Click to collapse
Hey,
That was my bosses first Idea but I said I can manage such issue. Well its not Samsung where Odin can do all kind of thinks and community is huge. Now I think service is the last option.
gnide93 said:
Hey,
That was my bosses first Idea but I said I can manage such issue. Well its not Samsung where Odin can do all kind of thinks and community is huge. Now I think service is the last option.
Click to expand...
Click to collapse
Hey ,have you tried the command "fastboot oem edl" when your phone is connected to pc in fastboot mode ,the screen has to go black ,and the led indicator would blink .If you manage to go in edl mode(emergency download mode) ,just reflash stock firmware with MiFlash. Merry Christmas!
nikoman1987 said:
Hey ,have you tried the command "fastboot oem edl" when your phone is connected to pc in fastboot mode ,the screen has to go black ,and the led indicator would blink .If you manage to go in edl mode(emergency download mode) ,just reflash stock firmware with MiFlash. Merry Christmas!
Click to expand...
Click to collapse
Hey, Thanks for your help. I got message device is locked! no edl
Any more ideas?
gnide93 said:
Hey, Thanks for your help. I got message device is locked! no edl
Any more ideas?
Click to expand...
Click to collapse
Short circuit pin mode, as @lacia-chan said. Search on Google, XDA or Mi Forums on how. Note: need to open phone.
So, I soft bricked my TMO OP9P. I can still access Fastboot but can't access anything else. After leaving fastboot, when the phone is rebooting, I just get a black screen.
On plugging it in, It shows up in ADB as unauthorized, and with no prompts to authorize, I can't get any further.
Any ideas?
I did that to an HTC U11 once - Never got it recovered, had to toss it...
Never dared relock a bootloader since...
I had the same thing happen to me.
The only thing that worked for me is to boot recovery and wipe system. Good luck
Jhoopes517 said:
So, I soft bricked my TMO OP9P. I can still access Fastboot but can't access anything else. After leaving fastboot, when the phone is rebooting, I just get a black screen.
On plugging it in, It shows up in ADB as unauthorized, and with no prompts to authorize, I can't get any further.
Any ideas?
Click to expand...
Click to collapse
i have the same problem let me know if you figure out a way around this !
For all of you having this issue, simply use the msm for your respective device by unplugging your phone, select power off, enter edl mode with cable plugged in and run the tool. I know another solution, but please PM me if this one doesn't work.
I had this issue as well, but you better not have messed with the sensitive partitions without a backup, otherwise there's no way to repair it.
razercortex said:
For all of you having this issue, simply use the msm for your respective device by unplugging your phone, select power off, enter edl mode with cable plugged in and run the tool. I know another solution, but please PM me if this one doesn't work.
Click to expand...
Click to collapse
i cannot figure out how to run the msm tool properly it always throws an error message
KidSudo6969 said:
i cannot figure out how to run the msm tool properly it always throws an error message
Click to expand...
Click to collapse
what is the error message? Maybe you dont have the correct one.
Jhoopes517 said:
So, I soft bricked my TMO OP9P. I can still access Fastboot but can't access anything else. After leaving fastboot, when the phone is rebooting, I just get a black screen.
On plugging it in, It shows up in ADB as unauthorized, and with no prompts to authorize, I can't get any further.
Any ideas?
Click to expand...
Click to collapse
Here is the msm tool
This was fixed via MSM. But I had another issue come up where MSM doesn't work.
Jhoopes517 said:
This was fixed via MSM. But I had another issue come up where MSM doesn't work.
Click to expand...
Click to collapse
What do you mean doesnt work? What did it do?
its not responding at all. no boot loop, no logo, no nothing. just a blackscreen no matter how long i charge it or hold the buttons down.
Aleena1217 said:
its not responding at all. no boot loop, no logo, no nothing. just a blackscreen no matter how long i charge it or hold the buttons down.
Click to expand...
Click to collapse
Did you try booting your phone into EDL mode? Hold down both the volume buttons, and while holding them down, plug in the USB cable (Connect with the PC). If you're on Windows, check the device manager in the control panel, and check if the PC recognized the phone (you might need to install the drivers too).
ekin_strops said:
Did you try booting your phone into EDL mode? Hold down both the volume buttons, and while holding them down, plug in the USB cable (Connect with the PC). If you're on Windows, check the device manager in the control panel, and check if the PC recognized the phone (you might need to install the drivers too).
Click to expand...
Click to collapse
after installing driver it recognized it in EDL mode. Im also JUST seeing that this is for the 9 and not the 9 pro. im guessing thats the issue? ii cant believe i missed that
Aleena1217 said:
after installing driver it recognized it in EDL mode. Im also JUST seeing that this is for the 9 and not the 9 pro. im guessing thats the issue? ii cant believe i missed that
Click to expand...
Click to collapse
Yes, it's for the Pro, but the procedure is the same. A good thing is that EDL works. Now just grab the MSM Tool for your model and flash it.
ekin_strops said:
Yes, it's for the Pro, but the procedure is the same. A good thing is that EDL works. Now just grab the MSM Tool for your model and flash it.
Click to expand...
Click to collapse
thank you so much. msm is downloading now. while I have you, do you have a link for the 9 pro conversion files? id really like to get that xpan update finally...
ekin_strops said:
Did you try booting your phone into EDL mode? Hold down both the volume buttons, and while holding them down, plug in the USB cable (Connect with the PC). If you're on Windows, check the device manager in the control panel, and check if the PC recognized the phone (you might need to install the drivers too).
Click to expand...
Click to collapse
im sorry i just realized i jumped in the middle of a different thread. This happened while trying to flash tmobile oneplus 9 pro to global firmware and after trying to enter recovery mode. Im guessing it happened because the files are for one plus 9, so im looking for the files for a 9 pro conversion but only am finding msm tool downloads for conversion instead of flashbin files.
Aleena1217 said:
im sorry i just realized i jumped in the middle of a different thread. This happened while trying to flash tmobile oneplus 9 pro to global firmware and after trying to enter recovery mode. Im guessing it happened because the files are for one plus 9, so im looking for the files for a 9 pro conversion but only am finding msm tool downloads for conversion instead of flashbin files.
Click to expand...
Click to collapse
Before I jump to conclusions, could you explain exactly which model you have and what is your goal?
ekin_strops said:
Before I jump to conclusions, could you explain exactly which model you have and what is your goal?
Click to expand...
Click to collapse
i have the le 2127 from tmobile because i didnt know any better. i dont want to root or do anything crazy. I just want to be able to flash to global or eu firmware so i can upgrade as oneplus releases the updates and not be a year behind on tmobiles schedule. I have the sim and bootloader unlocked successfully. I started to flash to the one plus 9 firmware because i somehow missed that it did not say pro. So now my phone in unresponsive except for QDL 9008 mode. MSM tool recognizes it and begins to update it but then gets a param preload "device not image match" message in red and stops. So once i figure out how to get past that and get this set to factory, i want to properly flash it to global or eu, whichever is available, and upgrade it to the latest version.
Aleena1217 said:
i have the le 2127 from tmobile because i didnt know any better. i dont want to root or do anything crazy. I just want to be able to flash to global or eu firmware so i can upgrade as oneplus releases the updates and not be a year behind on tmobiles schedule. I have the sim and bootloader unlocked successfully. I started to flash to the one plus 9 firmware because i somehow missed that it did not say pro. So now my phone in unresponsive except for QDL 9008 mode. MSM tool recognizes it and begins to update it but then gets a param preload "device not image match" message in red and stops. So once i figure out how to get past that and get this set to factory, i want to properly flash it to global or eu, whichever is available, and upgrade it to the latest version.
Click to expand...
Click to collapse
Are you getting the mismatch on the global/eu MSM or are you trying to flash back to stock T-Mobile? You're getting a mismatch because you're most likely using the wrong version of a firmware (msm).
I was trying xiaomi.eu on my global alioth. the current version for global is 12.5.4 but the one on xiaomi.eu is 12.5.8
using fastboot to update my phone, after a few minute phone went to the black screen forever. I can't even go to fastboot or recovery anymore.
although it's only showing a black screen, have you tried plugging phone in and running cmd 'fastboot devices' to see if phone shows at all?
also, have you tried holding power down for a good 20-30secs to reset/reboot device?
EDIT: read too quick... xiaomi.eu, no miflash used...
reg66 said:
although it's only showing a black screen, have you tried plugging phone in and running cmd 'fastboot devices' to see if phone shows at all?
also, have you tried holding power down for a good 20-30secs to reset/reboot device?
EDIT: read too quick... xiaomi.eu, no miflash used...
Click to expand...
Click to collapse
I'm thinking he didn't try those things normally they would respond saying I tried all of that.
Techguy777 said:
I'm thinking he didn't try those things normally they would respond saying I tried all of that.
Click to expand...
Click to collapse
maybe, yeah. hopefully he/she is busy with a fix.
EDIT: actually, thinking about it, was your bootloader even unlocked? @keaheng
keaheng said:
I was trying xiaomi.eu on my global alioth. the current version for global is 12.5.4 but the one on xiaomi.eu is 12.5.8
using fastboot to update my phone, after a few minute phone went to the black screen forever. I can't even go to fastboot or recovery anymore.
Click to expand...
Click to collapse
Sorry to tell u this but mobo died bro. I have the same problem 3 month ago and when i send my device to guarranty, he tell me mobo died....
X0PIRAT3 said:
Sorry to tell u this but mobo died bro. I have the same problem 3 month ago and when i send my device to guarranty, he tell me mobo died....
Click to expand...
Click to collapse
I bet you anything you and him had something go wrong with your PC. I restart my PC right before I flash anything and I close all application's and stop everything. While it flashes I don't touch my computer at all. I would assume that you guys might play on your PC while it's trying to flash thinking it's fine. Also you should use data cable or cable that came with it. Cheap cables are junk that's why they are cheap.
There is option to try EDL testpoint method when your phone is totally dead. It means you open your phone, connect testpoints and your phone would be visible for pc in device manager as qc9008 port.
Next step- you cant flash the rom by yourself, it requires authentication. There are "helpers" for that. I found one in Telegram and it took about 20usd and 20 minutes to boot the phone from dead brick (MI9T davinci).
ptr21 said:
There is option to try EDL testpoint method when your phone is totally dead. It means you open your phone, connect testpoints and your phone would be visible for pc in device manager as qc9008 port.
Next step- you cant flash the rom by yourself, it requires authentication. There are "helpers" for that. I found one in Telegram and it took about 20usd and 20 minutes to boot the phone from dead brick (MI9T davinci).
Click to expand...
Click to collapse
If that's true that's awesome. How do you find these helpers? Do you have a link? I don't even know what EDL is I am wondering if it ever happens to me
Cant remember anymore where I found it, so many keywords were Google'd. Maybe it was some russian content. Im pretty sure I cant post telegram link here so if someone wants it, I would PM.
Hi thank you guys for the concern. Phone has been fixed. There is a remote service guy who helped me by using TeamViewer. If you guy out there who has the similar problem, you can go on YouTube and search "Xiaomi qc9008"
Techguy777 said:
I bet you anything you and him had something go wrong with your PC. I restart my PC right before I flash anything and I close all application's and stop everything. While it flashes I don't touch my computer at all. I would assume that you guys might play on your PC while it's trying to flash thinking it's fine. Also you should use data cable or cable that came with it. Cheap cables are junk that's why they are cheap.
Click to expand...
Click to collapse
Working in IT for years, and all I can say if it would be true, we would have serious issues. It's not like windows 98 anymore, you can actually use your computer as a multitasking device. Like there aren't like 10000 processes without playing games. It's always easier to blame them, for doing "wrong" things while flashing. The only "wrong" thing you can do while flashing is pressing cancel or the reset button.
Hello peeps.
My Poco F3 got hard bricked after update froze (was doing clean install of stable EU rom). Phone won't boot into any mode, and won't appear on pc. I've tried sorting the Test Pins 50 different ways and it still doesn't get picked up by the pc. Qualcomm Drivers are installed. Device is connected with working data transfer USB cable. It definitely is getting charge cause Battery and CPU are hotter than the rest of the phone. I'm at complete loss, I have no idea what I'm doing wrong or if I screwed up my phone that bad that EDL also doesn't work. Thanks for anyhelp!
1. Disconnect the battery
2. Make USB-Cable ready for Insertion
3. While shorting the 2 Test-pins, connect the USB-Cable
This is how I had to do it. ^^ This can be difficult and may require multiple trials, but this should work!
Windows should make the "Hardware connected"-Sound directly after connecting the USB-Cable, and show "Qualcomm 9008" in Device Manager.
If not, you need to repeat it: disconnect USB, short the 2 Test-pins and connect USB again. All while leaving battery unplugged.
Note: EDL Mode can't be bricked. This read-only Mode resides inside the Qualcomm SOC. There would have to be physical (hardware) damage for this to not function.
If you need more assistance or so, I can give you my Discord. Though you already seem quite far. Good luck dud.
cyanGalaxy said:
1. Disconnect the battery
2. Make USB-Cable ready for Insertion
3. While shorting the 2 Test-pins, connect the USB-Cable
This is how I had to do it. ^^ This can be difficult and may require multiple trials, but this should work!
Windows should make the "Hardware connected"-Sound directly after connecting the USB-Cable, and show "Qualcomm 9008" in Device Manager.
If not, you need to repeat it: disconnect USB, short the 2 Test-pins and connect USB again. All while leaving battery unplugged.
Note: EDL Mode can't be bricked. This read-only Mode resides inside the Qualcomm SOC. There would have to be physical (hardware) damage for this to not function.
If you need more assistance or so, I can give you my Discord. Though you already seem quite far. Good luck dud.
Click to expand...
Click to collapse
I'd love it if you added me on discord. Please do give me your name
sumurtugu said:
I'd love it if you added me on discord. Please do give me your name
Click to expand...
Click to collapse
cyanGalaxy#3161
Hello , Can someone help me please, edl mode ok but nothing more on my Poco F3....
gregdeberg33 said:
Hello , Can someone help me please, edl mode ok but nothing more on my Poco F3....
Click to expand...
Click to collapse
I am assuming the phone screen does not light up at all, no fastboot or recovery mode.
This would mean the phone's hard bricked. It will require EDL flashing which can be done by someone with an authorised Xiaomi account.
user0u said:
I am assuming the phone screen does not light up at all, no fastboot or recovery mode.
This would mean the phone's hard bricked. It will require EDL flashing which can be done by someone with an authorised Xiaomi account.
Click to expand...
Click to collapse
Hello Indeed and it has been done just to relock the bootloader, i have to use miflash with the same rom used and choose flash all with lock ?
gregdeberg33 said:
Hello Indeed and it has been done just to relock the bootloader, i have to use miflash with the same rom used and choose flash all with lock ?
Click to expand...
Click to collapse
Yes. Just to be safe I would flash the rom with "clean all" instead of "clean all and lock" if I were you. Then after booting up the phone you can later lock the bootloader safely using "fastboot oem lock" in adb.
^
user0u said:
Yes. Just to be safe I would flash the rom with "clean all" instead of "clean all and lock" if I were you. Then after booting up the phone you can later lock the bootloader safely using "fastboot oem lock" in adb.
Click to expand...
Click to collapse
Ok thanks but why ? Fastboot oem lock is better ?
gregdeberg33 said:
Ok thanks but why ? Fastboot oem lock is better ?
Click to expand...
Click to collapse
In case of "clean all and lock" if something goes wrong during flashing, the bootloader will be locked and you will not be able to fix the phone. So it is safer to flash the rom first without locking the bootloader and then lock it after booting up.
user0u said:
In case of "clean all and lock" if something goes wrong during flashing, the bootloader will be locked and you will not be able to fix the phone. So it is safer to flash the rom first without locking the bootloader and then lock it after booting up.
Click to expand...
Click to collapse
It will not.
If the Flash aborts, it won't even get to the stage of locking the bootloader.
gregdeberg33 said:
Ok thanks but why ? Fastboot oem lock is better ?
Click to expand...
Click to collapse
just clean & lock
cyanGalaxy said:
It will not.
If the Flash aborts, it won't even get to the stage of locking the bootloader.
Click to expand...
Click to collapse
I meant in case of a bootloop.
gregdeberg33 said:
Ok thanks but why ? Fastboot oem lock is better ?
Click to expand...
Click to collapse
Because if you lock bootloader while flashing a rom with a different region than what came in the box, you will hard brick your phone