Hello peeps.
My Poco F3 got hard bricked after update froze (was doing clean install of stable EU rom). Phone won't boot into any mode, and won't appear on pc. I've tried sorting the Test Pins 50 different ways and it still doesn't get picked up by the pc. Qualcomm Drivers are installed. Device is connected with working data transfer USB cable. It definitely is getting charge cause Battery and CPU are hotter than the rest of the phone. I'm at complete loss, I have no idea what I'm doing wrong or if I screwed up my phone that bad that EDL also doesn't work. Thanks for anyhelp!
1. Disconnect the battery
2. Make USB-Cable ready for Insertion
3. While shorting the 2 Test-pins, connect the USB-Cable
This is how I had to do it. ^^ This can be difficult and may require multiple trials, but this should work!
Windows should make the "Hardware connected"-Sound directly after connecting the USB-Cable, and show "Qualcomm 9008" in Device Manager.
If not, you need to repeat it: disconnect USB, short the 2 Test-pins and connect USB again. All while leaving battery unplugged.
Note: EDL Mode can't be bricked. This read-only Mode resides inside the Qualcomm SOC. There would have to be physical (hardware) damage for this to not function.
If you need more assistance or so, I can give you my Discord. Though you already seem quite far. Good luck dud.
cyanGalaxy said:
1. Disconnect the battery
2. Make USB-Cable ready for Insertion
3. While shorting the 2 Test-pins, connect the USB-Cable
This is how I had to do it. ^^ This can be difficult and may require multiple trials, but this should work!
Windows should make the "Hardware connected"-Sound directly after connecting the USB-Cable, and show "Qualcomm 9008" in Device Manager.
If not, you need to repeat it: disconnect USB, short the 2 Test-pins and connect USB again. All while leaving battery unplugged.
Note: EDL Mode can't be bricked. This read-only Mode resides inside the Qualcomm SOC. There would have to be physical (hardware) damage for this to not function.
If you need more assistance or so, I can give you my Discord. Though you already seem quite far. Good luck dud.
Click to expand...
Click to collapse
I'd love it if you added me on discord. Please do give me your name
sumurtugu said:
I'd love it if you added me on discord. Please do give me your name
Click to expand...
Click to collapse
cyanGalaxy#3161
Hello , Can someone help me please, edl mode ok but nothing more on my Poco F3....
gregdeberg33 said:
Hello , Can someone help me please, edl mode ok but nothing more on my Poco F3....
Click to expand...
Click to collapse
I am assuming the phone screen does not light up at all, no fastboot or recovery mode.
This would mean the phone's hard bricked. It will require EDL flashing which can be done by someone with an authorised Xiaomi account.
user0u said:
I am assuming the phone screen does not light up at all, no fastboot or recovery mode.
This would mean the phone's hard bricked. It will require EDL flashing which can be done by someone with an authorised Xiaomi account.
Click to expand...
Click to collapse
Hello Indeed and it has been done just to relock the bootloader, i have to use miflash with the same rom used and choose flash all with lock ?
gregdeberg33 said:
Hello Indeed and it has been done just to relock the bootloader, i have to use miflash with the same rom used and choose flash all with lock ?
Click to expand...
Click to collapse
Yes. Just to be safe I would flash the rom with "clean all" instead of "clean all and lock" if I were you. Then after booting up the phone you can later lock the bootloader safely using "fastboot oem lock" in adb.
^
user0u said:
Yes. Just to be safe I would flash the rom with "clean all" instead of "clean all and lock" if I were you. Then after booting up the phone you can later lock the bootloader safely using "fastboot oem lock" in adb.
Click to expand...
Click to collapse
Ok thanks but why ? Fastboot oem lock is better ?
gregdeberg33 said:
Ok thanks but why ? Fastboot oem lock is better ?
Click to expand...
Click to collapse
In case of "clean all and lock" if something goes wrong during flashing, the bootloader will be locked and you will not be able to fix the phone. So it is safer to flash the rom first without locking the bootloader and then lock it after booting up.
user0u said:
In case of "clean all and lock" if something goes wrong during flashing, the bootloader will be locked and you will not be able to fix the phone. So it is safer to flash the rom first without locking the bootloader and then lock it after booting up.
Click to expand...
Click to collapse
It will not.
If the Flash aborts, it won't even get to the stage of locking the bootloader.
gregdeberg33 said:
Ok thanks but why ? Fastboot oem lock is better ?
Click to expand...
Click to collapse
just clean & lock
cyanGalaxy said:
It will not.
If the Flash aborts, it won't even get to the stage of locking the bootloader.
Click to expand...
Click to collapse
I meant in case of a bootloop.
gregdeberg33 said:
Ok thanks but why ? Fastboot oem lock is better ?
Click to expand...
Click to collapse
Because if you lock bootloader while flashing a rom with a different region than what came in the box, you will hard brick your phone
Related
Hi All,
Request all to provide any suggestions related to the below issue:
I rolled back from android n preview 2 to android m after which my display is scrambled.I am not able to view any thing on it.
But I am getting calls and able to pick them when I roughly expect the place where I can swipe the dialer right to pick the call.
Few things that I want to highlight is :
1)I had unstable wifi connection while downloading the android m OTA.
2)I removed the unlock bootloader check before rolling back in the developer options.
3)I can also sense that i am able to take screen shots when I am holding the power button and the volume down button based on the sound it normally makes (while capturing screenshots)
I am not able to come to conclusion whether this a hardware issue?(may be i need the replacement of the screen) or can it be due to corrupt ota file update?
Any suggestions would be much appreciated.
thanks
I would first see if flashing the m factory image solves the issue. Then look at hardware.
k.s.deviate said:
I would first see if flashing the m factory image solves the issue. Then look at hardware.
Click to expand...
Click to collapse
thank you but the problem is I am not able to see the screen at all and hence I am not able to go to the fastboot mode or recovery mode.
NeverBackDown said:
thank you but the problem is I am not able to see the screen at all and hence I am not able to go to the fastboot mode or recovery mode.
Click to expand...
Click to collapse
use "adb reboot bootloader" from command prompt to enter bootloader or if you know the device is off, press power + vol up + vol down for roughly 5sec, thatll get into bootloader. than flash factory image.
or last case scenario use wug fresh toolkit to force flash the image, make sure you select the device fails to boot box (I think that's what its called, the only other one states "device on/normal" <-- so NOT that one)
k.s.deviate said:
use "adb reboot bootloader" from command prompt to enter bootloader or if you know the device is off, press power + vol up + vol down for roughly 5sec, thatll get into bootloader. than flash factory image.
or last case scenario use wug fresh toolkit to force flash the image, make sure you select the device fails to boot box (I think that's what its called, the only other one states "device on/normal" <-- so NOT that one)
Click to expand...
Click to collapse
Thanks I am first looking for type c to usb to connect it to my computer,I will try for it tomorrow and also the first option you provided will work only if usb debugging is already enabled on my phone ,right?
NeverBackDown said:
Thanks I am first looking for type c to usb to connect it to my computer,I will try for it tomorrow and also the first option you provided will work only if usb debugging is already enabled on my phone ,right?
Click to expand...
Click to collapse
yes, the adb command will only work if debugging is on. Once in bootlader, use fastboot commands, debugging doesn't matter at that point.
k.s.deviate said:
yes, the adb command will only work if debugging is on. Once in bootlader, use fastboot commands, debugging doesn't matter at that point.
Click to expand...
Click to collapse
Hi All,
I got the cable ,I had everything to flash the official factory images.But the problem is as mentioned earlier I haven't checked the oem unlock in the developer option and this is not allowing to flash the factory images and fastboot flashing unlock is failing.
Is there any work around for this please?
NeverBackDown said:
Hi All,
I got the cable ,I had everything to flash the official factory images.But the problem is as mentioned earlier I haven't checked the oem unlock in the developer option and this is not allowing to flash the factory images and fastboot flashing unlock is failing.
Is there any work around for this please?
Click to expand...
Click to collapse
Not that I'm aware of. Sorry, there is a thread on here that may prove useful that deals with bricked phones with OEM unlocked off. The info there might help you at least get back to stock.
k.s.deviate said:
Not that I'm aware of. Sorry, there is a thread on here that may prove useful that deals with bricked phones with OEM unlocked off. The info there might help you at least get back to stock.
Click to expand...
Click to collapse
In that case ,do you think the service center guys have some other means to deal with if it is a software issue?
NeverBackDown said:
In that case ,do you think the service center guys have some other means to deal with if it is a software issue?
Click to expand...
Click to collapse
Possibly, I have no experience dealing with a service center unfortunately.
NeverBackDown said:
In that case ,do you think the service center guys have some other means to deal with if it is a software issue?
Click to expand...
Click to collapse
I also want to highlight that,I am getting a black screen on the fastboot mode too,i cant see nothing there..Only way i am able to identify that my device is in fastboot mode is by giving fastboot devices command.
So can this be a software issue?
NeverBackDown said:
Hi All,
I got the cable ,I had everything to flash the official factory images.But the problem is as mentioned earlier I haven't checked the oem unlock in the developer option and this is not allowing to flash the factory images and fastboot flashing unlock is failing.
Is there any work around for this please?
Click to expand...
Click to collapse
You might want to look into android screencast.
I don't know if it still works with the latest android releases, but back in kitkat days if I had a screen that wouldn't display I could use screencast and I'd get the framebuffer displaying on the PC. While viewing on PC I could then do touchscreen "guesses" more accurately and presumably you'd be able to enable OEM unlocked bootloader so you can flash factory images.
Hi,
My phone got a message about a virus which I assumed was a devious add, it wouldn't go away so I rebooted. It has gone into Mi-Recovery 3.0 and I cant get out. I've tried to connect to PC suite but it won't connect to my laptop
without debugging, which I can't do. I've wiped data but no good. Any ideas?
Flash full rom img via EDL mode and MiFlash software. Check out the official forums how to do it all.
For me the command fastboot oem edl works to get into edl mode.
pr0x2 said:
Flash full rom img via EDL mode and MiFlash software. Check out the official forums how to do it all.
For me the command fastboot oem edl works to get into edl mode.
Click to expand...
Click to collapse
Thank you for answering. I have downloaded a full rom and the MiFlash software. I have made an EDL cable but nothing happens. From what I read it says turn the phone off and connect the modified cable and it will enter EDL mode however it just stays on the Mi-Recovery 3.0 page. I've tried the command line you suggest but that can't find the phone. I've also tried the test point method and still can't get into edl mode. What am I doing wrong?
Sorry, I'm new to this so don't really know what I'm doing. Would you be able to give me some easy to follow advise or some links please.
Multi57 said:
Thank you for answering. I have downloaded a full rom and the MiFlash software. I have made an EDL cable but nothing happens. From what I read it says turn the phone off and connect the modified cable and it will enter EDL mode however it just stays on the Mi-Recovery 3.0 page. I've tried the command line you suggest but that can't find the phone. I've also tried the test point method and still can't get into edl mode. What am I doing wrong?
Sorry, I'm new to this so don't really know what I'm doing. Would you be able to give me some easy to follow advise or some links please.
Click to expand...
Click to collapse
You need your normal USB C cable. When you are in fastboot you need to type "fastboot oem edl" your screen will go to black and you are now in EDL mode. Now flash full img via miflash software.
pr0x2 said:
You need your normal USB C cable. When you are in fastboot you need to type "fastboot oem edl" your screen will go to black and you are now in EDL mode. Now flash full img via miflash software.
Click to expand...
Click to collapse
I cant get to fastboot as I'm stuck in Recovery. My only choices are Reboot to System and Back to Main Menu. When I'm in Main Menu my choices are Reboot, Wipe Data or Connect with MIAssistant.
Multi57 said:
I cant get to fastboot as I'm stuck in Recovery. My only choices are Reboot to System and Back to Main Menu. When I'm in Main Menu my choices are Reboot, Wipe Data or Connect with MIAssistant.
Click to expand...
Click to collapse
When you turn off the phone and press vol down + power what does that do?
It shows the Mi start screen then boots strait into recovery Main Menu. I can't turn the phone off without it rebooting.
Does anyone know how I can get around this? I've run out of things to try.
Did you try reflashing the recovery maybe that fixes it?
Sent from my MI 5s using Tapatalk
Can you explain how I do that? I can't connect to my computer so not sure what you mean. I'm new at this so unsure of the options.
Multi57 said:
Can you explain how I do that? I can't connect to my computer so not sure what you mean. I'm new at this so unsure of the options.
Click to expand...
Click to collapse
Oh hmm never mind. Ignore what I said above. I thought you had TWRP recovery but you've got the stock one.
Sent from my MI 5s using Tapatalk
templeka said:
Oh hmm never mind. Ignore what I said above. I thought you had TWRP recovery but you've got the stock one.
Sent from my MI 5s using Tapatalk
Click to expand...
Click to collapse
Is there no way of getting out of stock recovery?
Maybe your volume rocker buttons are faulty .
Happened with one of my friend his device was only booting into recovery mode on reboot because vol+ button was permanently stuck ?
Try to lift up the button if it is stuck or
press button repeatedly for sometime .
Ashish 289, you are right, it was a faulty volume rocker. Once disconnected it booted. Thanks.
Multi57 said:
Hi,
My phone got a message about a virus which I assumed was a devious add, it wouldn't go away so I rebooted. It has gone into Mi-Recovery 3.0 and I cant get out. I've tried to connect to PC suite but it won't connect to my laptop
without debugging, which I can't do. I've wiped data but no good. Any ideas?
Click to expand...
Click to collapse
now its my turn brother got my mi5 bricked in the same way .
it stays in mi recovery 3.0 always . if you tell me what you did after these steps not working ? could you do anything ?
need a solution man, please help .
thanks in advance.
Hello to everyone,
Yesterday I tried to install the api for the gcam but I done a big mistake. From the developer options I removed the option "enable OEM unlock" for the bootloader and on fastboot mode I relocked it. Now my mi a2 is completely bricked and I can't unlock. On the display now there is a red triangle with "The system has been destroyed" Help help help
Crashex said:
Hello to everyone,
Yesterday I tried to install the api for the gcam but I done a big mistake. From the developer options I removed the option "enable OEM unlock" for the bootloader and on fastboot mode I relocked it. Now my mi a2 is completely bricked and I can't unlock. On the display now there is a red triangle with "The system has been destroyed" Help help help
Click to expand...
Click to collapse
Get MiFlash
goto fastboot (power + volume down)
Recognize the device in MiFlash and download the stock rom here
extract it twice with winzip until you hit a folder
select the folder in MiFlash
Then flash it. It will take a bit to start for the first boot but you must redo the bootloader stuff and everything
Crashex said:
Hello to everyone,
Yesterday I tried to install the api for the gcam but I done a big mistake. From the developer options I removed the option "enable OEM unlock" for the bootloader and on fastboot mode I relocked it. Now my mi a2 is completely bricked and I can't unlock. On the display now there is a red triangle with "The system has been destroyed" Help help help
Click to expand...
Click to collapse
Oh why did you relock it?
I made this mistake before
and i solve this problem by "Test Point" method
You can solve this problem with just EDL mode.
https://www.youtube.com/watch?v=YctyUhBgp34
There is a video for how to get in to EDL mode.
https://www.youtube.com/watch?v=NkeqJwKpgm0
And there is another video.
Plug the usb cable to a PC while tweezers touching these points
I think there's a way out of there just by reflashing the boot image... It should be, but I don't know if it'll work after disabling OEM in developer options ... Big mistake there.
CarlosAG10 said:
I think there's a way out of there just by reflashing the boot image... It should be, but I don't know if it'll work after disabling OEM in developer options ... Big mistake there.
Click to expand...
Click to collapse
Yeah, that's how I killed a Redmi Note 4 once, I was in a hurry so I forgot to choose the non-relock option in MiFlash and then the flash went bad, rip phone.
However I've heard that this EDL trick that was mentioned seems to do the trick, so try that OP!
Kineceleran said:
Oh why did you relock it?
I made this mistake before
and i solve this problem by "Test Point" method
You can solve this problem with just EDL mode.
There is a video for how to get in to EDL mode.
And there is another video.
Plug the usb cable to a PC while tweezers touching these points
Click to expand...
Click to collapse
Thanks you so much. The phone now is ok! I flashed the last stock rom updated with the January fix. You saved my life. Thanks you so much?
Hey,
I'm working for a farming company as IT, and one of the employees left the Company with a locked phone. Xiaomi has a pattern lock.
What I tried;
Factory reset,
ADB devices do not see any (when trying unlocking bootloader)
fastboot boot twrp(got msg "device is locked")
Mi Reset, but ADB doesn't see any devices
Any ideas?
used Android fastboot Reset tool and got msg "device is locked"
gnide93 said:
Hey,
I'm working for a farming company as IT, and one of the employees left the Company with a locked phone. Xiaomi has a pattern lock.
What I tried;
Factory reset,
ADB devices do not see any (when trying unlocking bootloader)
fastboot boot twrp(got msg "device is locked")
Mi Reset, but ADB doesn't see any devices
Any ideas?
Click to expand...
Click to collapse
Hey im the maintainer of one of the custom roms for this phone you can look up on google how to use the test points if you short those with a tweezers or something it will go into edl and that should allow you to use miflash and completly reflash the stock rom.
Why don't you call him lol. Let's be honest you thought it was an iPhone X or something and stole it right?
lacia-chan said:
Hey im the maintainer of one of the custom roms for this phone you can look up on google how to use the test points if you short those with a tweezers or something it will go into edl and that should allow you to use miflash and completly reflash the stock rom.
Click to expand...
Click to collapse
Hey,
Thank your support, but the phone is still on the warranty and I can not do such operations. Strictly NO NO.. Would you have any more ideas?
gnide93 said:
Hey,
Thank your support, but the phone is still on the warranty and I can not do such operations. Strictly NO NO.. Would you have any more ideas?
Click to expand...
Click to collapse
Take them to the official service center, if there's one?
RFD80M-75679 said:
Take them to the official service center, if there's one?
Click to expand...
Click to collapse
Hey,
That was my bosses first Idea but I said I can manage such issue. Well its not Samsung where Odin can do all kind of thinks and community is huge. Now I think service is the last option.
gnide93 said:
Hey,
That was my bosses first Idea but I said I can manage such issue. Well its not Samsung where Odin can do all kind of thinks and community is huge. Now I think service is the last option.
Click to expand...
Click to collapse
Hey ,have you tried the command "fastboot oem edl" when your phone is connected to pc in fastboot mode ,the screen has to go black ,and the led indicator would blink .If you manage to go in edl mode(emergency download mode) ,just reflash stock firmware with MiFlash. Merry Christmas!
nikoman1987 said:
Hey ,have you tried the command "fastboot oem edl" when your phone is connected to pc in fastboot mode ,the screen has to go black ,and the led indicator would blink .If you manage to go in edl mode(emergency download mode) ,just reflash stock firmware with MiFlash. Merry Christmas!
Click to expand...
Click to collapse
Hey, Thanks for your help. I got message device is locked! no edl
Any more ideas?
gnide93 said:
Hey, Thanks for your help. I got message device is locked! no edl
Any more ideas?
Click to expand...
Click to collapse
Short circuit pin mode, as @lacia-chan said. Search on Google, XDA or Mi Forums on how. Note: need to open phone.
Hello, i tried helping my grandmother by installing the global rom on her Xiaomi Mi Pad 5 Pro WIFI, however as it didn't work i tried forcing the rom onto it by flashing it manually using fastboot, after this i am not able to power it on, or reach fastboot. It's just a black screen it doesn't matter how long you hold the power key it's just completely black.. Is there something i can do???? Or is it completely destroyed?
Global ROM is not available for PRO version. Probably you flashed a wrong one. Try flashing back the CN one matches your model.
mkcs said:
Global ROM is not available for PRO version. Probably you flashed a wrong one. Try flashing back the CN one matches your model.
Click to expand...
Click to collapse
Ahh thats the thing, it won't even power on now, i cannot even access fastboot
desyncccccccc said:
Ahh thats the thing, it won't even power on now, i cannot even access fastboot
Click to expand...
Click to collapse
long press "Volume Down" + "Power" for a few seconds at the same time and then release only"Power" once the fastboot logo appears, finally release "Volume Down" to enter the fastboot mode
Its for xiaomi mi5
Maybe helps
Is there anything I can do? Brick help
My Xiaomi mi5 does not turn on. No lights, fastboot is not accessible, resetting it does not do anything. Basically for any combination of buttons that I press, nothing happens and the screen stays black - it is completely dead. However, when I...
forum.xda-developers.com
Keyvannn said:
Its for xiaomi mi5
Maybe helps
Is there anything I can do? Brick help
My Xiaomi mi5 does not turn on. No lights, fastboot is not accessible, resetting it does not do anything. Basically for any combination of buttons that I press, nothing happens and the screen stays black - it is completely dead. However, when I...
forum.xda-developers.com
Click to expand...
Click to collapse
Yeah so the only problem with this is that mine won't even show up even though i have said drivers installed.. I'm starting to think it's hard bricked
Hello, yes same as me. The tablet are in the 9008 edl state when you put it on your computer. there are many flashing tools out there, the problem are the flash authentification from xiaomis side. i prepared a empty pc with windows 10 and loaded the last fastboot image. then i got a telegram contact from a russian guy who was able to use the xiaomi auth procedure, cost me 30 dollar and 3 days to find out this crap
Xiaomi needs a better way to unbrick its devices instead of Authorized Mi Accounts
Xiaomi has locked down the EDL mode on all of its devices, making it nigh impossible to unbrick a device without an Authorized Mi Account. Read on for more!
www.xda-developers.com
desyncccccccc said:
Hello, i tried helping my grandmother by installing the global rom on her Xiaomi Mi Pad 5 Pro WIFI, however as it didn't work i tried forcing the rom onto it by flashing it manually using fastboot, after this i am not able to power it on, or reach fastboot. It's just a black screen it doesn't matter how long you hold the power key it's just completely black.. Is there something i can do???? Or is it completely destroyed?
Click to expand...
Click to collapse
When it's plugged into the PC, is it recognised with "fastboot devices" or "adb devices"?
If it is you should be able to wipe with "fastboot -w" and start again.
Google detailed instructions.
mikefnz said:
When it's plugged into the PC, is it recognised with "fastboot devices" or "adb devices"?
If it is you should be able to wipe with "fastboot -w" and start again.
Google detailed instructions.
Click to expand...
Click to collapse
Unfortunately no, i do not get any response from fastboot whatsoever, there's no device detection in either fastboot or device manager. I even tried on my laptop which is brand new still no sign of life
fritzeman said:
Hello, yes same as me. The tablet are in the 9008 edl state when you put it on your computer. there are many flashing tools out there, the problem are the flash authentification from xiaomis side. i prepared a empty pc with windows 10 and loaded the last fastboot image. then i got a telegram contact from a russian guy who was able to use the xiaomi auth procedure, cost me 30 dollar and 3 days to find out this crap
Click to expand...
Click to collapse
Where would i be able to get in contact with someone like that??
desyncccccccc said:
Unfortunately no, i do not get any response from fastboot whatsoever, there's no device detection in either fastboot or device manager. I even tried on my laptop which is brand new still no sign of life
Click to expand...
Click to collapse
Try different cable & different pc usb slot?
Try flashing using * Xiaomi professional pro tools . Buy credit and all done,
mikefnz said:
Try different cable & different pc usb slot?
Click to expand...
Click to collapse
Unfortunately any cable/pc i try i get the same result, i'm debating wether i should just get a new one for her with global rom instead
desyncccccccc said:
Unfortunately any cable/pc i try i get the same result, i'm debating wether i should just get a new one for her with global rom instead
Click to expand...
Click to collapse
Don't give up yet!
Charge the tablet with another cable that you know works.
Make sure that you have the most up to date version of Platform Tools.
Make sure that when you're in the Command Prompt that you are in the Platform Tools folder.
Check connections with another device....
mikefnz said:
Don't give up yet!
Charge the tablet with another cable that you know works.
Make sure that you have the most up to date version of Platform Tools.
Make sure that when you're in the Command Prompt that you are in the Platform Tools folder.
Check connections with another device....
Click to expand...
Click to collapse
Hello again, i tried with all possible cables and or devices, somehow it still does not show up, i am rather confused and thinking that i might've broke it fully
desyncccccccc said:
Hello again, i tried with all possible cables and or devices, somehow it still does not show up, i am rather confused and thinking that i might've broke it fully
Click to expand...
Click to collapse
Buy an EDL Cable For Qualcomm 9008 Mode for deep flashing
desyncccccccc said:
Hello again, i tried with all possible cables and or devices, somehow it still does not show up, i am rather confused and thinking that i might've broke it fully
Click to expand...
Click to collapse
Have you got the most up to date version of Platform-tools installed and are you checking the connection from a CMD prompt in that Platform-tools folder?
mkcs said:
Buy an EDL Cable For Qualcomm 9008 Mode for deep flashing
Click to expand...
Click to collapse
Could you please link me one of those? I'm over in the EU so maybe they'll be fairly easy to find?
mikefnz said:
Have you got the most up to date version of Platform-tools installed and are you checking the connection from a CMD prompt in that Platform-tools folder?
Click to expand...
Click to collapse
Yeah, i've been doing all of that. I just now found out that there's an EDL cable specifically made for flashing in that mode