Related
I have got this weird problem with my Qtek 9090, I can’t hear a thing from the speaker except incoming calls??? And there’s no sound when I pick up and no one hear me on the other side unless I use the headset or the Bluetooth headset, everything works great then even playing music !??
I tried with few other rom, but no success! I even tried with WM5
Could this have anything with the headset plug? Cuse when the headset is plugged (in normal case) you can only hear incoming calls from the phone!
Remove your bluetooth profile(s), and do a soft reset.
I have the same problem after I used bluetooth.
Guest said:
Remove your bluetooth profile(s), and do a soft reset.
I have the same problem after I used bluetooth.
Click to expand...
Click to collapse
Not even flashing with new rom is helping as I wrote
FFVIII said:
Guest said:
Remove your bluetooth profile(s), and do a soft reset.
I have the same problem after I used bluetooth.
Click to expand...
Click to collapse
Not even flashing with new rom is helping as I wrote
Click to expand...
Click to collapse
What has flashing with a new rom have to do with removing your bluetooth profile?
Guest said:
FFVIII said:
Guest said:
Remove your bluetooth profile(s), and do a soft reset.
I have the same problem after I used bluetooth.
Click to expand...
Click to collapse
Not even flashing with new rom is helping as I wrote
Click to expand...
Click to collapse
What has flashing with a new rom have to do with removing your bluetooth profile?
Click to expand...
Click to collapse
dude, thanks for trying to help, but you should know better. flashing with a new rom erase everything including the the BT profile. I still think the problem is the headset jack.
And there’s no sound when I pick up and no one hear me on the other side unless I use the headset or the Bluetooth headset, everything works great then even playing music !??
Click to expand...
Click to collapse
This is telling me that you DID install the bluetooth again, and so you have a bluetooth profile, what is causing the no sound problem!
I have exactly the same problem as you.. When I remove the bluetooth profile all is working fine again.. that is.. untill I set it up again, and use it.. Than the SAME problem is back.
thank alot , but still got the problem even with the BT-profile removed, I have to use the wired headset to be able to hear anything
Problem Solved :lol: :lol: :lol:
I Opened the damn thing and took a look at the 2,5mm jack and guess what, it was broken ( I remember dropping the phone once for a week ago), I just removed it ( I don’t use the headset but I need the speaker), and everything is loud and clear now,
and with a Sprite Backup file I’m back now :twisted:
!!!?
I have such problem, but I think it really barbarian means of solving problem.
Is there any cleaner way?
Re: !!!?
hishnik said:
I have such problem, but I think it really barbarian means of solving problem.
Is there any cleaner way?
Click to expand...
Click to collapse
I read in another post somewhere that there is a microswitch in/near the headphone jack that switches off the sound to the speaker. Apparently, if it sticks, you poke a paper clip in and twiddle it about and you'll free it.
no sound form jasjar
having same problem. poked around with paperclip and all that, but still no sound. dont need headphone jack because hoping to use latest a2dp hack form latest rom for jasjar to be able to use BT headset. will removing headphone jack affect using BT headphones? need external sound.
I also have a similar problem - when in phone mode, other side can hear me but i cannot hear them, if i plug a headset with microphone the other side hear me and i also have sound from other side.
if i unplug the headset, i cannot hear the other side but the other side can hear me.
are there microswitches inside the headset plug for both microphone and speaker (two microswitches) ?
thanks, yol.
just got my jasjar back after having cracked lcd and headphone jack replaced. sent to http://www.pocketpctechs.com out of california as suggested by very helpful user on this site. cost me around $20 dollars and took only a day to fix. works fine now!
My O2 XDA IIs is behaving rater unusally. For a while I've had the problem that many people have reported where I can hear nothing during a call but the other person can hear me. This could be remedied by a soft reset. However now, no amount of resets seem to fix the problem.
The baffling thing is though that the speaker hardware would appear to be working as MediaPlayer still plays music out of it and the phone still rings etc. However no sound what so ever comes through the 2.5mm socket now, from either a call or from MediaPlayer.
What on earth can I do to fix it?
My O2 XDA IIs is behaving rater unusally. For a while I've had the problem that many people have reported where I can hear nothing during a call but the other person can hear me. This could be remedied by a soft reset. However now, no amount of resets seem to fix the problem.
The baffling thing is though that the speaker hardware would appear to be working as MediaPlayer still plays music out of it and the phone still rings etc. However no sound what so ever comes through the 2.5mm socket now, from either a call or from MediaPlayer.
What on earth can I do to fix it?
Guys, are your problem similar to mine? My problem is that the speaker is not working even though playing mp3. I thought it was radio problem, so flashing new rom also doesnt help. It is really the headphone jack cause the problem? When i flash to new rom, the speaker works, but after the auto config, the speaker doesnt even sound.
Please advise me on this. Thank in advance
Guys, are your problem similar to mine? My problem is that the speaker is not working even though playing mp3. I thought it was radio problem, so flashing new rom also doesnt help. It is really the headphone jack cause the problem? When i flash to new rom, the speaker works, but after the auto config, the speaker doesnt even sound.
Please advise me on this. Thank in advance
I have been using the Touch Pro 2 for a little while now, and I must say: no regret at all that I've bought it.
But the reason I post here is because I'm having a problem with my car-kit and the Touch Pro 2 when they are connected through bluetooth.
First of all, some data about the car-kit
Car stereo: JVC KD-BT22
Bluetooth functions: handsfree calling and Bluetooth Audio Streaming
Bluetooth version: 1.2 certified
Profile: HFP 1.5, OPP 1.1, A2DP 1.2, AVRCP 1.3
The situation:
When I pair the devices I can check two options:
1) Handsfree
2) Stereo Audio
This should be fine, but the problem comes next:
- When I both check handsfree and stereo audio, I don't get any streaming audio (I just hear about one second the song which is playing at the phone), if I call or get called nothing hapenned except the display of the phone showing the caller. The car-kit just keeps playing (for example) the CD.
- When I uncheck the stereo audio, just connecting the handsfree everything works "fine" (some small problems, not mentionable).
- When I only connect stereo audio the same happens as described before: the song which is playing at the phone I hear about one second, and after that it's silenced (the song is still "going forward", but no sound, nor on the phone, nor on the car stereo).
I've tried different set-ups, searched the forums and didn't saw anyone with this problem/no sollution, so I hope someone could help me.
This happened with the Stock Rom and also the custom rom I'm using right now, no difference. When I connect a stereo headphone (from Nokia) through Bluetooh, everything works fine.
don't pair from the phone use your Radio to pair...i had the same problem with my Pioneer at first so i searched for the device from my stereo and it worked just fine and ...i hope this helps... and make sure your discovery is always on...take care!
Well, that in a case makes sense...
The carkit also connected to my phone when discovery was turn off. Seemed strange to me already. A little, maybe stupid, question: what do I need to swith off/turn off on the phone so the phone won't connect to the carkit, but that I have to let the carkit connect to the phone?
HTC aware
I have similar problems with the BT stack in the TP2, which is disappointing having migrated from a Snap. I e-mailed HTC who admit they are aware of BT problems with the TP2 and advised me to keep an eye on the support page for a fix.
apv245l said:
I have similar problems with the BT stack in the TP2, which is disappointing having migrated from a Snap. I e-mailed HTC who admit they are aware of BT problems with the TP2 and advised me to keep an eye on the support page for a fix.
Click to expand...
Click to collapse
I also tried mailing HTC about this problem. The reply wasn't so hopegiving
"We're sorry, but the carkit isn't compatible. Please fill out the form for our technical support team"... Summary: I've not been too lucky with this combination
Hope they might do something about it after all. Me just thinking that Bluetooth = Bluetooth, but it's more complicated than that.
I also have the same problem with JVC-KD-AVX2 streaming audio. couple of times i did manage to get it to work, but once the stereo is turned off and on, i lose the streaming again.
i called HTC and emailed them. one said my stereo is not compatible, but i did have it working kind of.
not sure what the problem is as the touch pro1 worked fine. also my friends N97 worked fine
did all of you use your stereo to search for your phone or your phone to search for your stereo... if u used your phone then try using the stereo to to look for your phone under the connections menu and it should work
nemo0405 said:
did all of you use your stereo to search for your phone or your phone to search for your stereo... if u used your phone then try using the stereo to to look for your phone under the connections menu and it should work
Click to expand...
Click to collapse
Sorry for my late reply.
I can't connect/pair the phone using the stereo, to bad.
Well, I have the Pioneer Stereo and what I discovered was you have to do it from the stereo. For some unknown reason it errors out from phone. Since that, I have no problems, further more it reads my text as well as incoming e-mails. Hope that help
DownNeverOut said:
Well, I have the Pioneer Stereo and what I discovered was you have to do it from the stereo. For some unknown reason it errors out from phone. Since that, I have no problems, further more it reads my text as well as incoming e-mails. Hope that help
Click to expand...
Click to collapse
Which Pioneer are you using? I'm using the F700, and for some reason it won't mute the radio when in a call. I haven't gotten time to mess around with it much though. Reading incoming texts would be great.
i bought a car kit MP3 player for my car. I paired it with my TP2 and enabled the "BT Audio" and "BT Handsfree". Outgoing calls work fine with no problems at all. But during incoming calls there is a problem. If the incoming call is from someone saved in my contacts, the BT carkit does not ring. If its from an unknown number (not saved in my contacts), it works perfectly. I tried all the tweaks and hacks in this forum but nothing worked. Anymore ideas.
nemo0405 said:
don't pair from the phone use your Radio to pair...i had the same problem with my Pioneer at first so i searched for the device from my stereo and it worked just fine and ...i hope this helps... and make sure your discovery is always on...take care!
Click to expand...
Click to collapse
x2, exact same problem with MY pioneer on 6.1 ... took me an hour to figure out how to pair it correctly, and it happened completely by accident out of frustration while I was pounding my fists into the horn haha. Now I know better...
set your phone to discoverable, then pair from the radio, confirm on the phone. good luck - Mark
qaliza said:
i bought a car kit MP3 player for my car. I paired it with my TP2 and enabled the "BT Audio" and "BT Handsfree". Outgoing calls work fine with no problems at all. But during incoming calls there is a problem. If the incoming call is from someone saved in my contacts, the BT carkit does not ring. If its from an unknown number (not saved in my contacts), it works perfectly. I tried all the tweaks and hacks in this forum but nothing worked. Anymore ideas.
Click to expand...
Click to collapse
The only thing I can think of is that maybe you have different ringtones set up for contacts and unknown contacts. Or your carkit is broken.
Hope this helps - Mark
qaliza said:
i bought a car kit MP3 player for my car. I paired it with my TP2 and enabled the "BT Audio" and "BT Handsfree". Outgoing calls work fine with no problems at all. But during incoming calls there is a problem. If the incoming call is from someone saved in my contacts, the BT carkit does not ring. If its from an unknown number (not saved in my contacts), it works perfectly. I tried all the tweaks and hacks in this forum but nothing worked. Anymore ideas.
Click to expand...
Click to collapse
RADRaze2KX said:
x2, exact same problem with MY pioneer on 6.1 ... took me an hour to figure out how to pair it correctly, and it happened completely by accident out of frustration while I was pounding my fists into the horn haha. Now I know better...
set your phone to discoverable, then pair from the radio, confirm on the phone. good luck - Mark
Click to expand...
Click to collapse
Try the cab from this thread ------> Fix for playing ringtones over bluetooth headset.
It's meant so that the actual ringtone you have set will play on the car kit. I know my car kit used to have its own ring which was... boring to say the least. Now the various ring tones set to people on my phone play through the car kit. Anyway... This MIGHT fix the issue you guys are having as well.
RADRaze2KX said:
The only thing I can think of is that maybe you have different ringtones set up for contacts and unknown contacts. Or your carkit is broken.
Hope this helps - Mark
Click to expand...
Click to collapse
Yes i do have diifferent ringtones for contacts and also different pictures. The problem is in the contacts name. When i remove the name and leave it unnamed it works fine.
Thanks for your reply..
Aaron McCarthy said:
Try the cab from this thread ------> Fix for playing ringtones over bluetooth headset.
It's meant so that the actual ringtone you have set will play on the car kit. I know my car kit used to have its own ring which was... boring to say the least. Now the various ring tones set to people on my phone play through the car kit. Anyway... This MIGHT fix the issue you guys are having as well.
Click to expand...
Click to collapse
it did not fix my problem but thanks anyway. The problem im facing is that any contact saved with a name wont be recieved on the car kit. while if its left unnamed it will work fine.
[SOLUTION IN THIS POST]
There seems to be a compatibility issue with the new Bluetooth 4.0 of my HOX when pairing with some devices that have BT 3.0 version.
My own issue is with the Car Audio System of my 2008 C350 Mercedes Benz. The Bluetooth telephony worked perfectly with my DHD.
Now, I can pair my HOX with the system, but when I receive a call I can hear the other party only for 2 seconds then the voice is gone. As if we've both muted the call.
On the other hand, when I call someone, the phone call goes through just fine.
I've been reading a lot concerning this subject, and it seems that people are having the same problem with their SGIII.
A software update of the SGIII that was released for some carriers seems to have fixed the issue.
Also, my sister's iPhone 4S works fine with the system, even though it has BT 4.0.
So I believe this issue can be fixed, but it needs one of the Gurus on XDA to come up with a fix
My issue was slightly different (phone would pair but not connect) and I got onto my car kit manufacturer (in this case was a parrot system used in a mitsubishi) and found out I could update that. Since updating my car kit have had no problems at all.
That's good to hear. I read somewhere that updating the car system could be a solution.
But I'm hoping a solution could be made on the phone's side.
xbiggyl said:
That's good to hear. I read somewhere that updating the car system could be a solution.
But I'm hoping a solution could be made on the phone's side.
Click to expand...
Click to collapse
there might be nothing wrong on the phones side, have you checked to see if you can update your devices that are having problems as suggested?
i've had no issues running even bt2.1 stuff
Updating did not fix the issue.
Other phones (with older versions than BT 4.0) work perfectly.
I don't have access to updating my car's audio system atm, so I'm hoping something could be done on the phone's side.
But since this isn't a very wide spread problem among XDA users, I'm thinking it's not going to be an easy task.
Update:
Today, I tried something. After answering a call, the same thing happened (after 2 seconds I could no longer hear the other party but the call didn't drop)
On my HOX I chose Speaker and I was able to hear the other person talking; switched it back to BT handsfree (my car's audio system) and it worked.
Even though this is not a solution, but at least now I can answer a call when I'm driving. I just have to switch to Speaker then BT... Still better than nothing
Having a similar problem with mine, it pairs fine, I can access the phonebook etc but as soon as you try to make a call the bluetooth disconnects. However, i've found that if you turn the bluetooth off and back on again and re-pair it, it seems to work properly.
Would be nice if it just worked first time though.
p5x said:
Having a similar problem with mine, it pairs fine, I can access the phonebook etc but as soon as you try to make a call the bluetooth disconnects. However, i've found that if you turn the bluetooth off and back on again and re-pair it, it seems to work properly.
Would be nice if it just worked first time though.
Click to expand...
Click to collapse
Which ROM/Kernel are you using? And which car audio system are you trying to connect to?
bmw car
viper x rom but tried it on others and had the same problem
p5x said:
bmw car
viper x rom but tried it on others and had the same problem
Click to expand...
Click to collapse
After reading about this subject extensively, it seems that updating your car audio system is the best solution.
I suggest you take an appointment with the BMW service station and have them update your system.
yeah, i'm going to look into it. did you get yours sorted?
Bmw bluetooth 4.0
Same problem here on first connect every thing works fine but the next time the connection is lost with the first call.
Bmw doesn't have a update yet.
Would be cool if someone on xda could fix this for us.
p5x said:
yeah, i'm going to look into it. did you get yours sorted?
Click to expand...
Click to collapse
No I haven't yet. But I guess I'll try to get an appointment for next week.
For the time being, the workaround I came up with (switching to speaker phone then back to BT during a call), is working for me.
staalduinen74 said:
Same problem here on first connect every thing works fine but the next time the connection is lost with the first call.
Bmw doesn't have a update yet.
Would be cool if someone on xda could fix this for us.
Click to expand...
Click to collapse
Does the call drop completely? or you simply stop hearing the other party?
I noticed something new today.
During a phone call (connected to Car Audio System), and I receive an SMS, the same thing happens (but the workaround still works).
staalduinen74 said:
Same problem here on first connect every thing works fine but the next time the connection is lost with the first call.
Bmw doesn't have a update yet.
Would be cool if someone on xda could fix this for us.
Click to expand...
Click to collapse
have you checked with them recently?
Have you tried other phones with the car? wondering if the SGS 3 would have the same problem...
---------- Post added at 10:23 PM ---------- Previous post was at 10:21 PM ----------
xbiggyl said:
For the time being, the workaround I came up with (switching to speaker phone then back to BT during a call), is working for me.
Click to expand...
Click to collapse
thing is, when I try to make a call the bluetooth connection drops so I have to turn the bluetooth off and back on again to be able to reconnect
p5x said:
thing is, when I try to make a call the bluetooth connection drops so I have to turn the bluetooth off and back on again to be able to reconnect
Click to expand...
Click to collapse
Have you tried a custom kernel? I recommend Faux
SOLVED
Even though this is an old thread, I wanted to let you know that this issue has been fixed.
By updating my Hboot to 1.31 and using a jelly bean ROM, I no longer have a problem with Handsfree over Bluetooth.
For those of you who are still facing this issue, I hope this helps.
NOTE: Before updating to new Hboot, you need to make sure your CID allows it. Check here.
Also you need to flash a jelly bean ROM afterwards, I use ARHD and it's pretty good!
.
Cheers!
Hello.
I am on latest AEX 6.7, I have bought a pair of bluetooth 5.0 headphones, and the audio on call is really bad (they hear me far away). I'm pretty sure it's the ROM's fault (the headphones are of excellent quality).
Is bluetooth bad on any AOSP ROMs? Do you have any suggestions?
Scofield1990 said:
Hello.
I am on latest AEX 6.7, I have bought a pair of bluetooth 5.0 headphones, and the audio on call is really bad (they hear me far away). I'm pretty sure it's the ROM's fault (the headphones are of excellent quality).
Is bluetooth bad on any AOSP ROMs? Do you have any suggestions?
Click to expand...
Click to collapse
Try magisk module call recorder skavalex.. No issues for me in any ROM from nougat to.pie
sanjay.2704 said:
Try magisk module call recorder skavalex.. No issues for me in any ROM from nougat to.pie
Click to expand...
Click to collapse
Is this module for record phone calls? The recording of phone calls is already integrated in the AEX, and that isn't the problem.. the problem is the poor quality of the microphone of the bluetooth earphones in phone calls.
Scofield1990 said:
Is this module for record phone calls? The recording of phone calls is already integrated in the AEX, and that isn't the problem.. the problem is the poor quality of the microphone of the bluetooth earphones in phone calls.
Click to expand...
Click to collapse
If you using default call recorder, tty changing the format from arm to aac and then check..
sanjay.2704 said:
If you using default call recorder, tty changing the format from arm to aac and then check..
Click to expand...
Click to collapse
You didn't understand the meaning of my post.
Phone microphone is ok, both in voice call (also recorded), and VoIP.
The problem is when I connect a bluetooth headset, so the default microphone becomes the bluetooth headset, so when I make a phone call (normal or VoIP) my voice feels very low and far, and my caller struggles to hear me.
So, I asked, since I'm sure the bluetooth headsets are of excellent quality, if I could do something to improve the bluetooth of the zuk in the calls, because I read around that the problem could be of the AOSP roms, but I don't want to go back to a rom stock only for bluetooth (and I'm not even sure it would improve).
(If even now you have not understood the meaning of my question, you are a troll)
Scofield1990 said:
You didn't understand the meaning of my post.
Phone microphone is ok, both in voice call (also recorded), and VoIP.
The problem is when I connect a bluetooth headset, so the default microphone becomes the bluetooth headset, so when I make a phone call (normal or VoIP) my voice feels very low and far, and my caller struggles to hear me.
So, I asked, since I'm sure the bluetooth headsets are of excellent quality, if I could do something to improve the bluetooth of the zuk in the calls, because I read around that the problem could be of the AOSP roms, but I don't want to go back to a rom stock only for bluetooth (and I'm not even sure it would improve).
(If even now you have not understood the meaning of my question, you are a troll)
Click to expand...
Click to collapse
Is the recording OK when not using BT headset keeping recording format same.
Just to let you know.. There are other users who have faced problem of similar kind whose issues have resolved by changing audio recording format to aac.. I also use Bluetooth headset seinhizer HD 4.40 BT.. I have no such issues coz I always use the module and no such issues for me.. That's why I suggested..
I don't troll.
Skavalex has option to select recording source as internal and not mic which could have solved your problem.
sanjay.2704 said:
Just to let you know.. There are other users who have faced problem of similar kind whose issues have resolved by changing audio recording format to aac.. I also use Bluetooth headset seinhizer HD 4.40 BT.. I have no such issues coz I always use the module and no such issues for me.. That's why I suggested..
I don't troll.
Skavalex has option to select recording source as internal and not mic which could have solved your problem.
Click to expand...
Click to collapse
Ok, i will try. Thanks ?
Tws earphones are often limited in this, the mic is actually far away from your mouth so you might get low input from them, the fault isnt your phone, its just that even the pricier tws earphones suffer the same problem. Its just physics, when you speak, the sound goes forward but the mic of the tws is near your ear so the sound gain is very low. Try using the same tws on other phone amd see if the problem persists
Scofield1990 said:
You didn't understand the meaning of my post.
Phone microphone is ok, both in voice call (also recorded), and VoIP.
The problem is when I connect a bluetooth headset, so the default microphone becomes the bluetooth headset, so when I make a phone call (normal or VoIP) my voice feels very low and far, and my caller struggles to hear me.
So, I asked, since I'm sure the bluetooth headsets are of excellent quality, if I could do something to improve the bluetooth of the zuk in the calls, because I read around that the problem could be of the AOSP roms, but I don't want to go back to a rom stock only for bluetooth (and I'm not even sure it would improve).
(If even now you have not understood the meaning of my question, you are a troll)
Click to expand...
Click to collapse
Hey there..I am facing the similar issue. Did you solve it?
Yogesh Kulkarni said:
Hey there..I am facing the similar issue. Did you solve it?
Click to expand...
Click to collapse
Yes.. I solved it by changing the smartphone Unfortunately, by switching to ROM AOSP there is a worsening of many things, which come out in daily use, for example, the audio in VoIP video calls (whatsapp, Instagram, etc.) is poor .. they hear me very far away or with disturbances .
I'm using corvus 17.0 in my poco f3
Whenever I talk to someone on messenger or discord,they can't hear my sound properly,my headphone is 100% ok but still they can't hear me properly
This issue was also in the previous version 16.8.I changed 3 kernels still the problem doesn't go away.They say my mic sound is too much low,they can't hear anything.
How can I fix this problem?
I'm experiencing this too. Tried different miui versions still the problem exists.
Disable Google access to the mic.
This is my problem too.you experience this problem because when you connect Bluetooth earbuds in phone calls every thing is ok but !. In everything except phone calls phone do not use earbuds microphone
And still used in built microphone .
I post that but nobody cant help me.
So if anyone have solution please please share with us.
omidsa596 said:
Hi gay's.
My Poco f3 use inbuilt microphone whole connected with Bluetooth earbuds in any apps except during phone calls.
Please help me to use mic of Bluetooth earbuds in any app for example call of duty mobile or camera app.
Sorry if my English is bad.
Click to expand...
Click to collapse