Develop Bugs

Several serious problems with Qtek 9090

I'm having several problems with my Qtek 9090
There's a rather loud constant high-pitched noise comming from the screen whenever it is turned on (which is when the device is on!). At first I though it was comming from the speaker, but the screen is definitely the source of the noise. It doesn't matter if the backlight is on or off.
People can't hear what I say when using the phone - it makes no difference whether I use the included headphones or just speak directly into the microphone.
I haven't been able to find a BT headset that works with it. They all have the same problem; The sound scratch so much they're unusable. I tried 3 different brands that all works well with my 2020!
The GSM link often "falls out" - even though there's plenty of link the phone doesn't work (nothing happens when I try to call someone). A soft reset solves this problem!
As you can see, I can hardly use the device as a phone at all I've had the device replaced once, but all the problems persists on the replacement.
Does anyone have similar problems?

1. No, don't have this problem. Strange that it happened on the replacement too.
2. Yes.
3. I have just ordered a jabra headset in the hope it will fix problem#2.
4. Yes.
These problems with GSM are a real headache. One of the primary reasons for buying the PDA2k was to consolidate my mobile into one device. I have seen other people experiencing such problems but from what I could gather, voice over BT worked much better. Have you updated the ROM since you bought it? I should know the answer to 3 today, if DHL delivers, and I can tell you I will not be a happy man if the answer is Yes!

Try a Motorola HS810 headset... works fine for me.

harry_mb said:
1. No, don't have this problem. Strange that it happened on the replacement too.
2. Yes.
3. I have just ordered a jabra headset in the hope it will fix problem#2.
4. Yes.
These problems with GSM are a real headache. One of the primary reasons for buying the PDA2k was to consolidate my mobile into one device. I have seen other people experiencing such problems but from what I could gather, voice over BT worked much better. Have you updated the ROM since you bought it? I should know the answer to 3 today, if DHL delivers, and I can tell you I will not be a happy man if the answer is Yes!
Click to expand...
Click to collapse
I've already tried Jabra Freespeak 250, which didn't work for me
No I haven't updated the ROM as I've been told by the supplier that no new version is available yet!
outz said:
Try a Motorola HS810 headset... works fine for me.
Click to expand...
Click to collapse
I also tried both a Motorola and a SonyEricsson BT headset, but I don't remember the specific models - they both scratched immensely

i use SE 60 and it works ok

As you said, the Jabra250 is pretty much unusable!
Crackling is not constant but goes in waves, even though I do not move.
Am at a bit of a loss what to do now... the device is great apart from this.

>> People can't hear what I say when using the phone - it makes no difference whether I use the included headphones or just speak directly into the microphone
yes PBT read my other post
I have the same problem!!
it is scandalous to sel an device with this big defect!!

Sony HBH-660 works good for me.

People say that they can't hear me when I use the handset, but I don't have any crackling, etc with the headset and voice is clear. You just never know if the headset is going to connect when the phone rings though.

sound from screen
there's a rather loud constant high-pitched noise comming from the screen whenever it is turned on (which is when the device is on!). At first I though it was comming from the speaker, but the screen is definitely the source of the noise. It doesn't matter if the backlight is on or off
Click to expand...
Click to collapse
I have this problem also, I was told to use the new rom but this has made no difference, Please let me know if you have found a solution
[/quote]

Guys,
the hissing coming from the screen is a power supply problem. keep swapping phones until it goes away! I used to build switching power supply and the hissing (in a system designed to operate well above 20kHz) is only able to be heared when unstable, inductor core or cap is broken. The hissing is very 'not normal'.
It appears that the Q9090 is standing out as having more problems than the MDAIII, one is the mic volume, most of the other phones are not complaining about this so there may be something with they way the Q9090 are updated or shipped.

With the Jabra 250, don't forget to pair it pressing BOTH the volume and phone button on the headset on discovery with the 9090.(On bonding, turn off headset, turn on again pressing both buttons)
Funny thing is, I had the cracking also. I deleted the headset in BT manager and paired it again as described above. Now it works ok.

Hi,
I bought a Qtek 9090 a few days ago and I also have the same problem with volume level. People can't hear me when speaking, either with the headset or base microphone.
Using a different headset doesn't help (that's even worse sometimes) but I didn't try a BT heaset (and I don't want to as it would raise potential connection problems). I'm going to contact Qtek for support on this...
Pierre

I too am having problems with the Jabra 250 BT headset and my SPV M2000. The Jabra 250 worked fine on the XDAII but is terribly crackly on the newer model.
This is even when pairing it with the enhanced pairing of pressing Volume Up and Phone button together to pair.
Any ideas?

qtek 9090 bluetooth problem
Hi All,
I have new qtek9090 with cellink bluetooth headset. It is work normal, but i am loosing connection to headset each time qtek go to stand by mode. I need to switch off/on the bluetooth in order to restore the connection. Any ideas?

I often get a message stating:
"The Bluetooth Radio failed to turn ON due to insufficient driver momory available. You must perform a normal reset before you can turn ON the Bluetooth Radio."
Does your device also give you this message?
Is it also using the Broadcom "Bluetooth for Windows CE BT-PPC/PE Version 1.0.0 Build 2200"?
Interested to know if you have the same problems with the same bluetooth driver.

same problem
My qtek 9090 shows te same problem

This is a known problem with the Blue Angel, unfortunately, until they bring out a fix, all you can do is a soft reset.

upgrade
hi all,
how can i get updates from www.imateclub.com?
I can't register there, because I have qtek 9090 and not i-mate
thanks

O2 Sourced info on which BT headsets work
See: http://www.my-xda.com/downloads/Other_Bluetooth.pdf

Bluetooth Headphones

I recently purchased a pair of Iogear wireless Bluetooth headphones to use with my Fuze. I went through the process of pairing them, and managed to get them to connect. But when I tried to use them with listening to music or making a call, they would not work.
Anyone else have a problem or a clue as to why they won't work?
The phone supports both A2DP and AVRCP.
Hope this is in the correct section.

I'm unsure on why it won't work. I have some Plantronics Pulsar 590A and they are top notch. I use it with my 8525 (Hermes) and the sound quality is great. Also, Plantronics does a great job on their warranty.

I have noticed that sometimes when I connect my bluetooth headphones, that if I had the media player already launched that it would not play through the bluetooth headphones but though the built in speaker still. Once I shut down the media player and launched again after bluetooth was enabled and headphones connected, it would work.
When you paired the headphones, did you make sure that in the bluetooth settings for your bluetooth headphones (under settings, connections, bluettooth find and tap on your headphones and check there) that wireless stereo and handsfree was checked.
Sometimes also, my device for some reason just chooses not to connect anymore to my headphones and I have to do a soft reset to get it to connect. Does not happen very often - once per month. I use my bluetooth headphones and the Motorola T505 in my car for streaming music wirelessly to my car stereo every day.

hotrod101 said:
I have noticed that sometimes when I connect my bluetooth headphones, that if I had the media player already launched that it would not play through the bluetooth headphones but though the built in speaker still. Once I shut down the media player and launched again after bluetooth was enabled and headphones connected, it would work.
When you paired the headphones, did you make sure that in the bluetooth settings for your bluetooth headphones (under settings, connections, bluettooth find and tap on your headphones and check there) that wireless stereo and handsfree was checked.
Sometimes also, my device for some reason just chooses not to connect anymore to my headphones and I have to do a soft reset to get it to connect. Does not happen very often - once per month. I use my bluetooth headphones and the Motorola T505 in my car for streaming music wirelessly to my car stereo every day.
Click to expand...
Click to collapse
You know this happens with me with Core Player. I have to set up the A2DP before I start a movie or song in the program or else it won't work.
Instead of doing a soft reset I just turn bluetooth off and then back on. That usually solves the problem of the mystery disconnect.

hotrod101 said:
I have noticed that sometimes when I connect my bluetooth headphones, that if I had the media player already launched that it would not play through the bluetooth headphones but though the built in speaker still. Once I shut down the media player and launched again after bluetooth was enabled and headphones connected, it would work.
When you paired the headphones, did you make sure that in the bluetooth settings for your bluetooth headphones (under settings, connections, bluettooth find and tap on your headphones and check there) that wireless stereo and handsfree was checked.
Sometimes also, my device for some reason just chooses not to connect anymore to my headphones and I have to do a soft reset to get it to connect. Does not happen very often - once per month. I use my bluetooth headphones and the Motorola T505 in my car for streaming music wirelessly to my car stereo every day.
Click to expand...
Click to collapse
Yeah, that was one of the first things I had done before even trying to use them. I checked the settings. But still to no avail. Even tried soft resetting.
It worked instantly with my Tilt though. But I bought them to use with the Fuze lol.

addicus said:
You know this happens with me with Core Player. I have to set up the A2DP before I start a movie or song in the program or else it won't work.
Instead of doing a soft reset I just turn bluetooth off and then back on. That usually solves the problem of the mystery disconnect.
Click to expand...
Click to collapse
Yes I do this to for this particular problem. The soft reset required problem is something different - Not sure yet what causes it - I think that it is an app that I run every now and then that causes some kind of conflict even after it has been shut down. Still have to figure it out

mzshortay said:
Yeah, that was one of the first things I had done before even trying to use them. I checked the settings. But still to no avail. Even tried soft resetting.
It worked instantly with my Tilt though. But I bought them to use with the Fuze lol.
Click to expand...
Click to collapse
Have you been successful in connecting other bluetooth headsets to your device which worked?

hotrod101 said:
Have you been successful in connecting other bluetooth headsets to your device which worked?
Click to expand...
Click to collapse
Oh yeah. My bluetooth headset, Plantronics umm forgot the number works with the Fuze. This is a mystery to me

Have you tried your new bluetooth headphones with different media players such as S2P or Mortplayer, TCPMP, Core Player, WM Player, HTC audio Manager should all support but perhaps what you are using does not. I don't have a Fuze so don't know how the built in audio manager media player works but have seen several posts with people having problems. Try another media player 3rd party such as S2P, Mortplayer, TCPMP (all free) or Core Player (not free)

hotrod101 said:
Have you tried your new bluetooth headphones with different media players such as S2P or Mortplayer, TCPMP, Core Player, WM Player, HTC audio Manager should all support but perhaps what you are using does not. I don't have a Fuze so don't know how the built in audio manager media player works but have seen several posts with people having problems. Try another media player 3rd party such as S2P, Mortplayer, TCPMP (all free) or Core Player (not free)
Click to expand...
Click to collapse
Okay, I'll do that, but it doesn't even work with using them to make a call.
There's a built-in mic on them, so it should work with that as well. It says it's connected, but the lil headphone icon never shows up when I turn them on.

Are these the ones you have
http://www.iogear.com/product/GBMH211W6/
It says your device must support Headset or Hands-Free Profile. try unchecking wireless stereo and only check one of these profiles and see if it works

hotrod101 said:
Are these the ones you have
http://www.iogear.com/product/GBMH211W6/
It says your device must support Headset or Hands-Free Profile. try unchecking wireless stereo and only check one of these profiles and see if it works
Click to expand...
Click to collapse
If this doesn't work you may wanna RMA yours and get a new pair. If that doesn't work, then you may wanna step up to a more expensive pair.

hotrod101 said:
Are these the ones you have
http://www.iogear.com/product/GBMH211W6/
It says your device must support Headset or Hands-Free Profile. try unchecking wireless stereo and only check one of these profiles and see if it works
Click to expand...
Click to collapse
Yeah, those are the ones I have.
And it does support both of those.
Maybe I'll do what addicus said and send them back.
I was really hoping these would work too! Darn.
-------------
After trying them again, when I tried to make a call, I heard it make a sound as if it was turning off, and still did not work properly.
I'll be returning these most likely.

mzshortay said:
Yeah, those are the ones I have.
And it does support both of those.
Maybe I'll do what addicus said and send them back.
I was really hoping these would work too! Darn.
-------------
After trying them again, when I tried to make a call, I heard it make a sound as if it was turning off, and still did not work properly.
I'll be returning these most likely.
Click to expand...
Click to collapse
Damn you shortay! Since I wrote in this thread my Plantronics have been tripping when I make a phone call and not syncing up. I figured it out. It's that new Yota dialer I put in the other day. Sometimes I can't use the bluetooth on a phone call unless the A2DP is hooked up. Weird.

addicus said:
Damn you shortay! Since I wrote in this thread my Plantronics have been tripping when I make a phone call and not syncing up. I figured it out. It's that new Yota dialer I put in the other day. Sometimes I can't use the bluetooth on a phone call unless the A2DP is hooked up. Weird.
Click to expand...
Click to collapse
Lol, sorry! I wonder if I hard reset my phone will it fix it.
I messed around with a new cab earlier today, and had to restore
my phone, and i think it's be tripping afterwards anyway. Last try before I sent them back...that's after the iogear support people reply to me. Appreciated all the help.
Okay, so the email I got from the support basically told me how to set up the bluetooth headphones. WOW... some help they are. Other than giving me a number to call if I needed "further assistance". I thought that's what I was asking for in the first place.
Anywho, after randomly deciding to hard reset my phone, I tried the headphones again, and wah lah...they work!
I guess some setting in my phone wasn't set right. Go figure. Anyway.. Thanks to those who helped.
I'll be keepings these.

mzshortay said:
Lol, sorry! I wonder if I hard reset my phone will it fix it.
I messed around with a new cab earlier today, and had to restore
my phone, and i think it's be tripping afterwards anyway. Last try before I sent them back...that's after the iogear support people reply to me. Appreciated all the help.
Okay, so the email I got from the support basically told me how to set up the bluetooth headphones. WOW... some help they are. Other than giving me a number to call if I needed "further assistance". I thought that's what I was asking for in the first place.
Anywho, after randomly deciding to hard reset my phone, I tried the headphones again, and wah lah...they work!
I guess some setting in my phone wasn't set right. Go figure. Anyway.. Thanks to those who helped.
I'll be keepings these.
Click to expand...
Click to collapse
Cool beans shortay! Stay around XDA Dev.

mzshortay said:
Lol, sorry! I wonder if I hard reset my phone will it fix it.
I messed around with a new cab earlier today, and had to restore
my phone, and i think it's be tripping afterwards anyway. Last try before I sent them back...that's after the iogear support people reply to me. Appreciated all the help.
Okay, so the email I got from the support basically told me how to set up the bluetooth headphones. WOW... some help they are. Other than giving me a number to call if I needed "further assistance". I thought that's what I was asking for in the first place.
Anywho, after randomly deciding to hard reset my phone, I tried the headphones again, and wah lah...they work!
I guess some setting in my phone wasn't set right. Go figure. Anyway.. Thanks to those who helped.
I'll be keepings these.
Click to expand...
Click to collapse
Glad they are working now for you.

okay, so I may need you guy's advice. It seems as though they only work once and then i have to delete them from the phone, then discover them again. Could it be a defect in the particular headphones I have, or the model not working with my Fuze? Maybe I should RMA these anyway?

Maybe you should head on into the shop you purchased your Fuze and describe the problem to them. Perhaps they will allow you to connect various different bluetooth headphones (that they have at the shop) to your device to see if it is a problem with your device or with your headphones.

hotrod101 said:
Maybe you should head on into the shop you purchased your Fuze and describe the problem to them. Perhaps they will allow you to connect various different bluetooth headphones (that they have at the shop) to your device to see if it is a problem with your device or with your headphones.
Click to expand...
Click to collapse
This is a great idea! If you find out the problem is with the headset - RMA them. If not, dig deep in that Fuze forum and see if you guys can figure out a fix.

Bluetooth; bad sound quality

Please help me before i go crazy on this!
I bought a new handsfree (Plantronics Voyager 520) hoping it was something wrong with my old one.
So my problem is that when I use my handsfree I hear alot of noises and sometimes I can´t even hear the other part because of that. But it seems to be only me that hear this, not the one I talk to.
I tried changing the Linespeed value in registry, but that didn´t help.
Maybe if I flash a new radio??
I have searched, but havn´t found any help. Dont know if this is a known problem?

Someone knows?
It seems to be something with the reception. All i hear is alot of cracking noise.
I have also tried with my Jabra BT3030 and the sound is good. But not when im using any of my headsets.

I, too, use a Plantronics 520 with my AT&T Tilt2. I hear lots of snap, crackle and pop but the other party does not hear it.
Anybody?

using a Plantronics Discovery 925 and it's pretty clear. No call quality complaints from both sides. Only complaint I have is it picks up too well sometimes the other party can hear some unwanted noises...

I havn´t found a solution to this problem. Someone else have a good idea??

Double post

I use a Jabra Dogtag with the touch pro2, i have clear sound in music and phone works also good.
Even the play, next and prev keys work perfect.
Try going to the bluetooth menu and activate stereo sound instead of headset (Maybe
Or turn off secure connection.
This might not help, but who knows

MikeAffec said:
I use a Jabra Dogtag with the touch pro2, i have clear sound in music and phone works also good.
Even the play, next and prev keys work perfect.
Try going to the bluetooth menu and activate stereo sound instead of headset (Maybe
Or turn off secure connection.
This might not help, but who knows
Click to expand...
Click to collapse
By Dogtag, you mean BT3030?? I have one of those also and it´s working for me. But when i connect to one of my hedsets it´s very bad sound.
I have an old SE and a new Plantronics, but same issue with both. But only when i connect those to my TP2. Both those are mono-headset you put on your ear.

Bluetooth car Handsfree problem..

I posses a sgs2 with a bluetooth problem... I have no problem pairing or connecting to the car kit (pioneer DEH7350BT)
but when I do, and making/recieveing a call, I can hear the other side just greatly but the other side CANNOT hear me.... I have tried everything... and YES it do work with other phones (such as Se Naite, iphone 4 and etc) those other phones are working great with it (the other side CAN hear me)
but with my sgs2 it doesnt...
also sgs2 wont let me transmit music using the bluetooth...
any solution anyone? please? I have tried everything! pairing and unpairing, tried few diff roms, taking out battery, tried EVERYTHING...
please help...

anyone??? please??

i dont have a media option...
I guess that what screws things up...

anyone else might help please?

anyone?? please? really important!

OHDUSER said:
anyone?? please? really important!
Click to expand...
Click to collapse
I doubt it's that important you have to bump the thread every hour or so.
Unpair both devices completely and repair them again. It might not be pairing both modes.
You can also see if HFP is enabled in the /etc/bluetooth/audio.conf file via the Root Explorer app.
I use music and handsfree just fine with my SGS2 and my cheap Panasonic head unit. If the 2 options aren't there under the bluetooth device, then it's a pairing issue.

I have paired my device several times in various cars and never had to do any special configuration. I've always worked fine for the first try.
___________________________
http://www.sam-galaxy-s2.com

Does your phone pair properly with other car based bluetooth?
If not, it may be the kernel.
I had successful pairing with my original dlev rom in both of my cars and intermittent problems answering or my the other side could not hear my voice. Solution was to switch the kernel.
Hope this helps.

to what kernel you switched?! that exacly my issue! please answer

If you're having that much problem with it, pick up wired headphones with mic (or use the ones that came with the phone). I switched from bluetooth to these and will never look back.

but i need to use bluetooth due to the car's speakers....
thats the whole thing...

Bluetooth is car is always a matter of luck to me.
Feling lucky because I can manage it with my SG2 better than with my previous phone, the original I7000 galay

well that info isnt really helpful

anyone else might help please?

anyone????????

Are you 100% sure the car player has compatible a2dp music streaming?
If so then both headset and media options should be available in the Bluetooth pairing options.
Sent from my GT-I9100 using XDA App

Did you ever solve this issue? I am having the same problems with the same deck and phone.
Cheers.

It is not the phone, it's your dash unit. You'd be better off contacting Pioneer or whoever makes your aftermarket unit.
My SGS2 has sync'd and made calls perfectly via BT since day 1 with my Nissan GT-R... everything is stock Nissan though.

[Q] Soundabout app issues.

Hello everyone !
My M8 went mad today. It recognizes all headphones/earphones except the stock one that came with the device. The stock one works perfectly fine with all the devices except my M8. That sounds really strange, but it did happen.
I googled some forums and found that soundabout app on the play store could solve this issue by routing the audio to headphone jack. It worked.
I was tinkering with the settings of the app. I routed the audio to the earpiece(top speaker) only.
I'm somewhat skeptical that the top speaker now has less volume compared to the bottom one, when playing music/videos.
Does this mean that I have a partly damaged speaker ?
Also, can tinkering the settings damage the hardware(speakers) in any case ?
Thank you for reading.

Tej XFire said:
Hello everyone !
My M8 went mad today. It recognizes all headphones/earphones except the stock one that came with the device. The stock one works perfectly fine with all the devices except my M8. That sounds really strange, but it did happen.
I googled some forums and found that soundabout app on the play store could solve this issue by routing the audio to headphone jack. It worked.
I was tinkering with the settings of the app. I routed the audio to the earpiece(top speaker) only.
I'm somewhat skeptical that the top speaker now has less volume compared to the bottom one, when playing music/videos.
Does this mean that I have a partly damaged speaker ?
Also, can tinkering the settings damage the hardware(speakers) in any case ?
Thank you for reading.
Click to expand...
Click to collapse
I think that the earpiece speaker is actually less powerful than the bottom speaker. I use SoundAbout myself as I have an issue with one of my friends old stereo's. The phone doesn't recognize that I have plugged in the aux cable but it only happens with that stereo. So I have to use the SoundAbout app to change the setting to Wired Headphones.
I'm not sure if tinkering setting can damage the speakers, but I have damaged the bottom speaker myself by flashing one of the first CM12 nightly's that came out. The speaker is quite easy to replace yourself and same goes for the earpiece.

Hello,
I have nexus 5 with stock 5.1.1 not rooted.
I started to use soundabout because my phone didn’t recognize AUX-IN from my car audio.
Everything was ok for long time till yesterday.
Now, after I will use soundabout I can’t hear any call conversation. I need to restart nexus.
I am wonder If someone know some similar program that I can test.
Regards from Poland