I just got the notification to update to QPR Beta 3. I want to know your opinion on Android 13 beta 1 and if it's worth it to go in that direction instead.
I'm happy with 13 beta 1 with the QPR3 Beta 3 modem for the moment.
LLStarks said:
I'm happy with 13 beta 1 with the QPR3 Beta 3 modem for the moment.
Click to expand...
Click to collapse
So worth it then?
orlans21 said:
So worth it then?
Click to expand...
Click to collapse
I haven't dropped a call in the usual spots yet. I'll take what I can get. My room is kinda **** for signals but the overall RSRP might be slightly better than before if only barely. A few dBm for near-threshold signals always helps.
LLStarks said:
I haven't dropped a call in the usual spots yet. I'll take what I can get. My room is kinda **** for signals but the overall RSRP might be slightly better than before if only barely. A few dBm for near-threshold signals always helps.
Click to expand...
Click to collapse
I guess I'll update it when I get home tonight then
Do I have to opt out of android 12 beta QPR and wipe before I get an ota update to 13 beta? Because I've opted out of 12 beta and opted into 13 beta but I'm still only seeing an update to QPR beta 3
nvm i just got the 13 beta notification
Beta 1 gives me no service whatsoever. I'd be using it but I've tried flashing it over and over in hopes it would work but it just refuses to.
msr4 said:
Beta 1 gives me no service whatsoever. I'd be using it but I've tried flashing it over and over in hopes it would work but it just refuses to.
Click to expand...
Click to collapse
hmmm and where are you located
orlans21 said:
hmmm and where are you located
Click to expand...
Click to collapse
Xfinity Mobile, Colorado. Others also have this same issue not exclusively limited to my carrier or location.
msr4 said:
Xfinity Mobile, Colorado. Others also have this same issue not exclusively limited to my carrier or location.
Click to expand...
Click to collapse
well.....its currently installing so I hope i dont run into that lol
LLStarks said:
I'm happy with 13 beta 1 with the QPR3 Beta 3 modem for the moment.
Click to expand...
Click to collapse
Hello, can you tell me how you flashed the Modem to the Pixel 6 Pro. Is there any description in this forum and can you upload the Files you have flashed. Thanks a lot and have a nice Day.
LLStarks said:
I'm happy with 13 beta 1 with the QPR3 Beta 3 modem for the moment.
Click to expand...
Click to collapse
Do you mind reminding me of the steps to flash a new modem?
Edit: I got it, thanks!
BiBaBuTzE said:
Hello, can you tell me how you flashed the Modem to the Pixel 6 Pro. Is there any description in this forum and can you upload the Files you have flashed. Thanks a lot and have a nice Day
Click to expand...
Click to collapse
The modem is only one file from the factory image file that was mentioned. If you download the aforementioned factory image (QPR3B3), you'll notice that it's a zip file. If you look inside of that zip file you'll see the modem file with the word "radio" in its name. IIRC, it's "radio___bunch of numbers here___.img".
Essentially, you would copy that radio.img file out of the factory image zip and place/paste it into your platform-tools folder. Then, enable USB debugging in your phone's "Developer options" settings, open CMD with admin rights on your PC, navigate to the platform-tools folder, put your phone into recovery/fastboot mode and then flash the radio.img file using fastboot.
I can't get into more details at the moment as I'm currently at work . But if you need more help here, feel free to let me know =).
To flash the modem you have chosen (qpr beta 3 modem) use the following command, without the quotes.
"fastboot flash radio radio-raven-g5123b-100840-220427-b-8504179.img"
Is it possible to flash the modem with locked bootloader?
gpvecchi said:
Is it possible to flash the modem with locked bootloader?
Click to expand...
Click to collapse
No, not by itself. You'd have to be in the beta and I don't recommend that with a locked bootloader.
Hopefully you guys are reporting this to and android team with the feedback apk
For me A13B1 is a good step ahead of QPR 12.1. Better battery, no overheating. Minor lags and stutters are there, but overall its great!
Having the USB C wired sound working with my headphones is an important feature for me, as well as the LDAC 990 codec. They are both working with the QPR Beta 3.
It seems that I read somewhere that those features weren't working with the 13 Beta.
LLStarks said:
No, not by itself. You'd have to be in the beta and I don't recommend that with a locked bootloader.
Click to expand...
Click to collapse
I'm in 13 beta. But Fastboot can't work with locked bootloader. Any other way?
Related
About MIUI 7
http://en.miui.com/
Features
OTA incremental updates every week
Original Samsung feature:multiwindow,camera,Power Saving Mode,S Pen,Fast charging,etc
Support Variants
N910F/N910P/N9108V/N9100/N9106W/N9109W(have been tested) and maybe other Snapdragon variants(have not been tested)
If you need more note4 snapdragon variants,please tell me!
Changelog
Temporarily empty
Instructions for Using
1. Download the ROM.
2. Copy the file to your internal or external SD Card
3. Reboot into recovery and wipe data,cache and dalvik cache
4. Install the ROM
5. Reboot your phone & enjoy it!
Download Link
http://miuirom.xiaomi.com/rom/u2699462/5.11.3/miui_n9108v_rainbow_5.11.3_32125b01ef_4.4.zip
GAPPS :http://opengapps.org/?api=4.4&variant=nano
If you like my work,please press Thanks button and rate ROM with 5 stars.
THX!
XDA:DevDB Information
MIUI 7 For Sprint Samsung Galaxy Note 4, ROM for the Sprint Samsung Galaxy Note 4
Contributors
bxfxf, bxfxf
Source Code: https://github.com/micode
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 5.0/4.4 Baseband & Bootloader
Based On: Samsung Stock Firmware
Version Information
Status: Stable
Current Stable Version: 5.10.28
Stable Release Date: 2015-10-28
Created 2015-10-28
Last Updated 2015-10-28
wow, does everything works on here? SMS? and thank you
IcEdup856 said:
wow, does everything works on here? SMS? and thank you
Click to expand...
Click to collapse
yes
Damn it and I just flashed and set up Freeza's latest
Also can we change the kernel
I took the ota update to 5.0+...I cant just simply flash this right? I just want to make sure so I don't waste my time. I would really love to try this rom
yea, I too was on 5.1.1 and now running Freeza's latest but would love to give this a run. Wasn't sure if I could just wipe and flash.
Sent from my SM-N910P using Tapatalk
I like MIUI ROMS I tried it out not bad, it's just i don't like that you can't use other kernels and also it's kit kat
test this now you can just wipe and flash even if you are on 5.1.1.. the rom starts on right away in Chinese so you will have to change the language also data wasnt turned on after flash i had to turn it on tho i cant figure out how to get LTE i havent tested much yet but ill report back once ive test it more
Screens?
Ill post a few SS shortly
Edit:
Here are some screenshots
I cant download from this link doesnt move from 0% is there another one?
xyojimbox said:
I cant download from this link doesnt move from 0% is there another one?
Click to expand...
Click to collapse
just have to hang out it took like 10 mins to get off of 0% for me and i ended up switching from wifi to LTE and it downloaded faster.. i would still recommend downloading it first on a computer..
Wr3ckd90 said:
test this now you can just wipe and flash even if you are on 5.1.1.. the rom starts on right away in Chinese so you will have to change the language also data wasnt turned on after flash i had to turn it on tho i cant figure out how to get LTE i havent tested much yet but ill report back once ive test it more
Click to expand...
Click to collapse
Are you chinese? I could not find out where to change language that was frustrating.
I don't know why but I don't service . Any fix? This rom is smooth and fast other than that
Sent from my iPad using Tapatalk
xyojimbox said:
Are you chinese? I could not find out where to change language that was frustrating.
Click to expand...
Click to collapse
I am not but I found this video that help me find he spot I needed
https://www.youtube.com/watch?v=FbhKOZNPeec
zeraworld said:
I don't know why but I don't service . Any fix? This rom is smooth and fast other than that
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
I'm still trying to figure that out myself I'm able to get 3g signal by activation data then using the *#*#4636#*#* and changing over to cdma auto (PRL) I having problems figuring out a working LTE signal
Wr3ckd90 said:
I am not but I found this video that help me find he spot I needed
https://www.youtube.com/watch?v=FbhKOZNPeec
I'm still trying to figure that out myself I'm able to get 3g signal by activation data then using the *#*#4636#*#* and changing over to cdma auto (PRL) I having problems figuring out a working LTE signal
Click to expand...
Click to collapse
Goto Settings--Mobile networks--Preferred network type,and then choose Lte 4G
bxfxf said:
Goto Settings--Mobile networks--Preferred network type,and then choose Lte 4G
Click to expand...
Click to collapse
So everything its working. I been waiting for miui rom for note 4 .. and are we going to have updates ?
Sent from my SM-G925P using XDA Free mobile app
ooo it looks so clean! it's been years since I've tried miui (galaxy s1)
I do have the downgradeable bootloader and running 5.1.1 but I really don't think I can bring myself to go back to kitkat... I look forward to any possible lolly releases in the future. great work!
edit: I do have a question... has the download booster been enabled? the Sprint variant (910p) has not yet received a working mod although other Sprint devices have been successfully been patched to make it work (s4, s5, maybe 6 too?)
Sterist said:
ooo it looks so clean! it's been years since I've tried miui (galaxy s1)
I do have the downgradeable bootloader and running 5.1.1 but I really don't think I can bring myself to go back to kitkat... I look forward to any possible lolly releases in the future. great work!
edit: I do have a question... has the download booster been enabled? the Sprint variant (910p) has not yet received a working mod although other Sprint devices have been successfully been patched to make it work (s4, s5, maybe 6 too?)
Click to expand...
Click to collapse
No you don't have to downgrade the bootloader.
I haven't spent a lot of time messing with the rom. I haven't seen a download booster yet.
Still not able to get lte. And 3g is just unusable .
Sent from my SM-N910P using Tapatalk
I don't know if this question has been asked and I've combed the threads. When the Android P beta program starts (hopefully tomorrow) will I need an unlocked bootloader for that? I'm currently on VZW's stupid locked bootloader.
I apologize in advance if this has already been answered. I know how you guys hate repeating yourselves.
tomswaggah said:
I don't know if this question has been asked and I've combed the threads. When the Android P beta program starts (hopefully tomorrow) will I need an unlocked bootloader for that? I'm currently on VZW's stupid locked bootloader.
I apologize in advance if this has already been answered. I know how you guys hate repeating yourselves.
Click to expand...
Click to collapse
You shouldn't have to. Many enroll in the beta programs with locked bootloaders :good:
Badger50 said:
You shouldn't have to. Many enroll in the beta programs with locked bootloaders :good:
Click to expand...
Click to collapse
Thanks a lot. :good: it's appreciated!!
U should be fine. My first Pixel XL was locked still able to get Android O at the time
How accurate are these roadmaps?
jbarcus81 said:
How accurate are these roadmaps?
Click to expand...
Click to collapse
From what I can remember with Android Oreo Betas, their timeline was pretty on point.
Sent from my Pixel 2 XL using Tapatalk
EeZeEpEe said:
From what I can remember with Android Oreo Betas, their timeline was pretty on point.
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
Nice.. I just compared the 2 and so far they're pretty close. I'm seeing in a few locations that DP2 should be tomorrow. :fingers-crossed:
jbarcus81 said:
Nice.. I just compared the 2 and so far they're pretty close. I'm seeing in a few locations that DP2 should be tomorrow. :fingers-crossed:
Click to expand...
Click to collapse
Nice. I jumped on Oreo when it was DP2 so I'm willing to do the same with P.
Sent from my Pixel 2 XL using Tapatalk
Update:
And now that I recall, last Google I/O was the release of Oreo DP2 so it's highly likely they'll repeat that.
EeZeEpEe said:
Nice. I jumped on Oreo when it was DP2 so I'm willing to do the same with P.
Sent from my Pixel 2 XL using Tapatalk
Update:
And now that I recall, last Google I/O was the release of Oreo DP2 so it's highly likely they'll repeat that.
Click to expand...
Click to collapse
I did the same exact thing with Oreo. Played around with DP1 but ran DP2 almost constantly until final. I flash different roms constantly, or at least I used to. But anymore vanilla Android is really my cup of tea.
Do not need to unlock
tomswaggah said:
I don't know if this question has been asked and I've combed the threads. When the Android P beta program starts (hopefully tomorrow) will I need an unlocked bootloader for that? I'm currently on VZW's stupid locked bootloader.
I apologize in advance if this has already been answered. I know how you guys hate repeating yourselves.
Click to expand...
Click to collapse
You can flash the OTA firmware in recovery mode. and use adb sideload command to update Android P beta. download OTA firmware in developers.android.com/preview/download-ota.html
BTW, beta is open now
Beta program is open again
Beta is open again but it's still linking to Developer Preview 1 and not the beta. Hopefully they get the new beta links updated today.
I'm using the beta now. Thanks everyone for your responses.
I am downloading the P DP2 now, and it will install. I am stock not rooted or anything.
Is there a way to make this a fresh clean install without having TWRP or root ?
I have a Verizon Pixel 2 XL. Will I be able to go back to Oreo fairly easily if I give the P Beta a try?
Thanks!
fliptwister said:
I have a Verizon Pixel 2 XL. Will I be able to go back to Oreo fairly easily if I give the P Beta a try?
Thanks!
Click to expand...
Click to collapse
when you leave the beta program, you will get ota to roll back to oreo. It will wipe your device.
lucky_strike33 said:
when you leave the beta program, you will get ota to roll back to oreo. It will wipe your device.
Click to expand...
Click to collapse
Thanks for quick reply! Can I leave the beta program at any time?
Google Pay not working.... Can anyone verify?
I'm having connectivity issues with Wi-Fi and Mobile, can anyone confirm?
Why is there 2 release numbers for Q? Which one is the proper one to use for Google Pixel 3Xl.(not verizon)
TIA
According to what I've read .019 is for those who were already on the betas and .020 is for those upgrading from Pie.
Not true, as I was on the last beta and the OTA pulled down .20 for me....
Honestly, they are hiding something here given the fact that there is NO documentation. I just got off chat with Pixel support. After going round and round and the agent claiming that it all depends on a bunch of stuff according to her "resources" she asked the resources one more time and they said that since you are flashing manually they recommended downloading .20 even though it completely contradicts the numbering method of every other Pixel file since the beginning when there was more than one (agnostic was always the first or lowest number and carrier specific after).
cmh714 said:
Not true, as I was on the last beta and the OTA pulled down .20 for me....
Click to expand...
Click to collapse
This^^^^^^^^
.019 is normal stock upgrade to Android 10
.020 is for those who were on beta Q
KennyG123 said:
This^^^^^^^^
.019 is normal stock upgrade to Android 10
.020 is for those who were on beta Q
Click to expand...
Click to collapse
Mine was on stock pie and updated via OTA to 10 QP1A.190711.020.
melodystyle2003 said:
Mine was on stock pie and updated via OTA to 10 QP1A.190711.020.
Click to expand...
Click to collapse
Same here. I didn't notice there were two and just downloaded the last one in the list and sideloaded in stock recovery. Kind of glad I didn't notice so I was ignorant of any confusion.
melodystyle2003 said:
Mine was on stock pie and updated via OTA to 10 QP1A.190711.020.
Click to expand...
Click to collapse
Weird..same for me but mine still shows 019.
Guess it don't matter
Here is the Official Samsung Galaxy S10 Plus Android 10 Beta. Please Click the Thanks button. You may have to install this with adb.
This Is for the USA Tmobile Snapdragon SM-G975U
You need to be on Android 9 build G975USQS2BSI4
Update 12-16-2019 Official Android 10
Android Q Build G975USQU2CSKP
Update 10-14-2019 Beta 1 Link
CRC32 28c3bc19
MD5 53f924d4553752b046662e271c7a41fe
SHA-1 fad59ce892748f001d6fd492dea38791c4714e69
Update 10-24-2019 Beta 2 Link
CRC32 3f4ad702
MD5 bc4756231acc5ab4a793fa610dd28bb4
SHA-1 6b2bad7443c50b32d17f4c535da8f6138da861c0
Update 11-08-2019 Beta 3 Link
CRC32 fab54929
MD5 503c9371fd0dbb2812a51dc4d0a4e00d
SHA-1 3a09579e6d7eba30c06ce0543978a26d87492dda
Update 11-15-2019 Beta 4
Link
CRC32 247fe598
MD5 27853ef71371fcc3b21aafee543735b2
SHA-1 7a6ea05956a55bbec0e26a2f7a644d988b755cc5
Temp link will put on my server later
Update 11-18-2019 Beta 5
Link
CRC32 04d1ded9
MD5 f18fbe446c18ebcf50bf0191046dec6e
SHA1 0e64d61238c6d4a43dc835f17ef1b2b35faaf8d1
Update 11-22-2019 Beta 6
Link
CRC32 80ec7f75
MD5 9ac5b9ab0c460f9304c12c7bcdfec38b
SHA-1 68418482a8ddda553de244c1df31c60a2a8cc883
Update 11-23-2019 Beta 7
I was not able to Capture the OTA for beta 7. I want to thank @Wacky2bakky for posting the OTA. I have posted a link to @Wacky2bakky's post where you can download Beta 7
@Wacky2bakky
https://forum.xda-developers.com/showpost.php?p=80986921&postcount=1018
Update 12-16-2019 Official Android 10
Link
CRC32 8dd2f416
MD5 4307f10a1245e3618a9a27fce1b39360
SHA-1 b0333080d3885c0d4a6154895616770b00d07f06
Change logs are in the attachments below
You mean G965U?
Zixi said:
You mean G965U?
Click to expand...
Click to collapse
No, The 975U T-Mobile USA Snapdragon. Thank you I have corrected the first post. I hand the S9plus model number in the text. I copied and edited mt thread from last year an missed that part.
Thank you for noticing that
goofwear said:
No, The 975U T-Mobile USA Snapdragon.
Click to expand...
Click to collapse
G975U is a S10+ phone
Looks like your link is active now and am downloading. How do we go about installing? Also what firmware do we need to be on? I have the Verizon S10 plus.
Thank you!
Sent from my SM-G975U using Tapatalk
Can you flash this onto an at&t model?
Anyone tried flashing this on a Samsung factory unlocked tmo s10+? Yes it's a snapdragon model.
Gthunders said:
Anyone tried flashing this on a Samsung factory unlocked tmo s10+? Yes it's a snapdragon model.
Click to expand...
Click to collapse
I think we need to wait until we have the Odin images to flash that way
I'm not sure but from checking other similar threads this zip file would need to be renamed to update.zip or ota.zip and flashed from stock recovery from the s10+ or using command via adb. to push the update.
Gthunders said:
I'm not sure but from checking other similar threads this zip file would need to be renamed to update.zip or ota.zip and flashed from stock recovery from the s10+ or using command via adb. to push the update.
Click to expand...
Click to collapse
But I think update.zip can only be applied over the version they are made to be updated from.
le0.br4zuc4 said:
But I think update.zip can only be applied over the version they are made to be updated from.
Click to expand...
Click to collapse
Exactly right
Anyone else not able to use the multi window button on the nav bar?
jagrave said:
Looks like your link is active now and am downloading. How do we go about installing? Also what firmware do we need to be on? I have the Verizon S10 plus.
Thank you!
Click to expand...
Click to collapse
Must be on BSI4 Carrier firmware(U model).
jznomoney said:
Can you flash this onto an at&t model?
Click to expand...
Click to collapse
Yes but it may effect your signal and such because att is like that.
le0.br4zuc4 said:
But I think update.zip can only be applied over the version they are made to be updated from.
Click to expand...
Click to collapse
Yes must be on BSI4. Ive been able to apply update via recovery from external sd card without naming it update.zip
Will be applying tonight after switching back to U firmware.
As you can see in the screenshot Source version is BSI4 and Target version is ZSJ8. You can find this in any ota zip by going to /SEC-INF/buildinfo.xml
Sent from my SM-G975U1 using XDA Labs
Just a heads up for anyone on Verizon looking to try the beta, the update providing goofwear regarding T-Mobile is indeed compatible with Verizon wireless. Flash it either through adb sideload or sd card as mentioned and it'll boot normally. No csc or sim card tricks needed in order for service to work properly. Phone boots up fine and no issues relating service. Thanks guys and thank you goofwear!
I was able to get this going as well. So far no problems. Only been about 20 minutes though.
Sent from my SM-G975U using Tapatalk
So im finally unofficially ln the beta. After flashing back to BSI4 U firmware which wouldnt boot(after dirty flashing twice in a row lol) i was able to just use the update zip and it booted no problem. All is good. Like the new animations so far. Will post after using it some more. On SPR without any difference in signal so far.
Sent from my SM-G975U1 using XDA Labs
Sent from my SM-G975U1 using XDA Labs
jagrave said:
I was able to get this going as well. So far no problems. Only been about 20 minutes though.
Sent from my SM-G975U using Tapatalk
Click to expand...
Click to collapse
Can i update to beta via that update zip.I'm currently on G975USQS2ASGK
I flashed my AT&T G975U over to the U1 firmware today since the unlocked version is part of the beta program, but the beta for unlocked devices has been delayed to "a later time".
So I got a question. If I flash back to G975U1 AT&T, and then update to this beta using the update.zip file what's the situation for future OTA updates? Since AT&T is not part of the public beta they wont be pusing updates designed to update this build. So I would have to Odin back to a AT&T release right?
Zixi said:
Can i update to beta via that update zip.I'm currently on G975USQS2ASGK
Click to expand...
Click to collapse
Just try and let us know. It will fail or update. You lose nothing.
Hey friends!
These are only for the unlocked Surface Duo. I am sorry At&t users.
Here is the OTA link for Android 11:
https://android.googleapis.com/packages/ota-api/package/a9bfdee15f2137f020fffded98b4bdee5d8bec8e.zip
Link to the OTA.zip itself:
https://www.androidfilehost.com/?fid=17825722713688275853
How to root Android 11 (Surface Duo)
https://forum.xda-developers.com/t/how-to-root-android-11-bootable-patched_magisk.4393369/
Android 11 stock boot.img
https://www.androidfilehost.com/?fid=17825722713688275865
Cheers
I just rooted the new android 11 update.
The only difference from android 10 is you should now use the newest magisk v23 rather than the older one
I followed this guide exactly except skipped all the magisk workaround stuff and just used the latest version of the magisk app to patch the boot.img
Jyers said:
I just rooted the new android 11 update.
The only difference from android 10 is you should now use the newest magisk v23 rather than the older one
I followed this guide exactly except skipped all the magisk workaround stuff and just used the latest version of the magisk app to patch the boot.img
Click to expand...
Click to collapse
Yup, have a guide being published right now.
Are these for the AT&T version as well. Mine is currently locked if that matters
eqbirvin said:
Yup, have a guide being published right now.
Click to expand...
Click to collapse
Great to hear, nice work
Jyers said:
Great to hear, nice work
Click to expand...
Click to collapse
Thank you!!! Enjoy root and great work yourself mate
Eazii said:
Are these for the AT&T version as well. Mine is currently locked if that matters
Click to expand...
Click to collapse
No only for unlocked, I will update the OP.
Eazii said:
Are these for the AT&T version as well. Mine is currently locked if that matters
Click to expand...
Click to collapse
To be honest with you, I don't know if this will work for At&t, it might but I don't have the at&t model so I cannot verify for you. You can try flashing via adb sideload in recovery and see but non of us are responsible if things don't work lol
eqbirvin said:
To be honest with you, I don't know if this will work for At&t, it might but I don't have the at&t model so I cannot verify for you. You can try flashing via adb sideload in recovery and see but non of us are responsible if things don't work lol
Click to expand...
Click to collapse
Lol yeah I know the drill around these parts. I just did a quick internet search and the update is ONLY for the unlocked models according to what I read. I guess I'll be waiting for the time being
Eazii said:
Lol yeah I know the drill around these parts. I just did a quick internet search and the update is ONLY for the unlocked models according to what I read. I guess I'll be waiting for the time being
Click to expand...
Click to collapse
I figured as much Dang that sucks, I wish it would just work on the at&t also like pixel devices.
eqbirvin said:
I figured as much Dang that sucks, I wish it would just work on the at&t also like pixel devices.
Click to expand...
Click to collapse
It's late where I am, but tomorrow I may just try it and see if it will work. I'll read some more about it tonight and if I take the dive tomorrow I will report back to let others know.
Eazii said:
It's late where I am, but tomorrow I may just try it and see if it will work. I'll read some more about it tonight and if I take the dive tomorrow I will report back to let others know.
Click to expand...
Click to collapse
After a bit of experimentation I managed to get it to work. Although you can't just `add sideload` it since the verification will fail. You'll have to unlock the bootloader and dd some partitions manually. Then once it thinks it's the global variant you can `add sideload`. I made a thread about it https://forum.xda-developers.com/t/turn-at-t-into-a-the-global-variant.4393631/
filfat said:
After a bit of experimentation I managed to get it to work. Although you can't just `add sideload` it since the verification will fail. You'll have to unlock the bootloader and dd some partitions manually. Then once it thinks it's the global variant you can `add sideload`. I made a thread about it https://forum.xda-developers.com/t/turn-at-t-into-a-the-global-variant.4393631/
Click to expand...
Click to collapse
Dude that is awesome! Wait did you also post this on the subreddit? lol I saw the post and github page today was getting ready to post on here sending people your way
will this work in an att is pay off and unlocked duo?
any chance off the android 10 recovery image for unlocked duo?
Pls DELETE !
May 10 release
The following update is available for Surface Duo.
Software version
Update info
2022.215.137
This update:
Addresses scenarios outlined in the Android Security Bulletin—May 2022.
Improves device stability.
Improves in-app camera experience in dual-screen modes for applications with dynamic orientation requirements.
I forget to enable OEM unlocking,and now wy Surface duo only Bootloader mode,can you share me the firehose files,my Email:[email protected]
Hi all. Can someone share the link for the last android 11 OTA global (not ATT) which is September 2022. Thank you very much.
Can I use this to downgrade from 12 to 11?
Edit: Nvm I figured it out, it worked flawlessly
look for firehose programmer file for surface duo 128GB
would anyone be able to support in this?