Related
Just going to dump all the info I've found about this device into this thread. All the threads pertaining to this thread are in Russian and I can't read Russian, so this might be helpful to any English speaking owners of this tablet.
Special thanks to Telegram user @SSDD_1744 (don't know your XDA/Reddit user, I'm sorry) for basically spoonfeeding me all these instructions!
WARNING: If you need to flash to stock for whatever reason, be sure to download a image file specific to your country. If you don't, you'll hard brick your device that can only be fixed QPST (supposedly).
Rooting:
(Tested on 5.0.2)
Install KingRoot. Let it root your device.
Install Super-SU Me, to get rid of the bloatware that comes with KingRoot.
Installing Xposed:
I used Flashify to flash TWRP. Be sure to flash the right version though (2.8.7.7 v2) or else you won't be able to mount cache.
Then download Xposed (version sdk21 ARM) and flash it.
WARNING: Flash v1 of the modded TWRP and you won't be able install any apps after flashing Xposed.
Unbricking:
Still working on it. Downloaded QPST but have not been able to get QPST 2.7 to read the tablet.
Links:
Discussion:
https://translate.googleusercontent...690491&usg=ALkJrhiWSlkbZ-tUofZx68NPSGIv8pjIPA
Root:
https://translate.googleusercontent...JrhhQszcRvUo8HILThvz57JmsLj4L9g#entry44556703
https://translate.googleusercontent...JrhiCt__6apcRhk-gtcBExYJCnC9nGQ#entry41676452
Instructions for obtaining the rights to Ruth phones / tablets.
Tested on Android 4.4+
perhaps this algorithm works on Android 5+, I have no way to verify
All transactions with their phones / tablets are performing at your own risk !!!
To get started, read this post from start to finish and only then proceed to action!
Introduction
This instruction is written based on my own experience obtaining root on their plates, and then on the Xperia M2, bought plemyashki. For instructions attached versions of applications that were relevant at the time, the new version can download the relevant topics on the forum, there will find all information on how to work with the proposed programs and algorithms for their actions (links to topics added).
For all the action with your phone / tablet you are responsible for yourself!
Download all the necessary tools to obtain Root (of instructions / topics on the forum), obespechte for phone / tablet access to the Internet (Wi-F / mobile data) and let the phone settings / tablet installation from unknown sources.
Needed Downloads
KingRoot_V4.5.0B202.apk (6.76 MB)
Me_5.9.apk-SuperSU (9.07 MB)
V2.49 Beta.apk SuperSU (5.63 MB)
eu.chainfire.supersu.pro.205.apk (52,88 KB)
Next in series:
1. Install KingRoot .
Get Ruth's right, in the device may reboot.
2. Set SuperSU-Me, .
Run the grantor, the program deletes KingRoot and Chinese KingUser with replacement SuperSu.
Remove the longer SuperSu-Me the desired program.
3. Obnovyaem SuperSu to the latest version. Then set PRO-key .
Installing Pro-key Optionally !!! Use Cases SuperSu without installing key .
4. Open SuperSu and on-demand update binary SU normal way. After a successful update, confirm the request to restart.
5. To make sure that everything is done correctly, check the correct installation and operation of Ruth (mount the system partition on the record), I used the Root Checker Pro and Root Explorer , respectively.
The output is a complete rut without kitayschiny with SuperSu Pro. We use and enjoy
Click to expand...
Click to collapse
Unlocking bootloader (haven't tried this):
https://translate.googleusercontent...Jrhh6g4wI-8Hb_LzAcPnIUxYvWNzZ0A#entry46711087
Stock firmware:
https://translate.googleusercontent...?s=&showtopic=703414&view=findpost&p=45272695
Damn, development has really boomed on this little tablet! Finally got it back after a few months (I sent it into Asus to repair it for me).
Stock ROM:
https://www.asus.com/ru/Tablets/ASUS_ZenPad_80_Z380KL/HelpDesk_Download/ (I can't get the English version to load, delete the /ru/ and you'll be redirected to the English site)
https://www.asus.com.cn/Tablets/ASUS_ZenPad_80_Z380KL/HelpDesk_Download/ (Chinese site)
==== REMEMBER TO DOWNLOAD THE CORRECT COUNTRY OR YOU'LL BE BRICKED) ====
https://yadi.sk/d/b1NMLXHBsNV8C (latest software for the worldwide model)
[http://4pda.ru/forum/index.php?showtopic=703414&st=320#entry50270292]
http://4pda.ru/forum/index.php?showtopic=703414&st=200#entry49389176 (Asus Flash Tool and stock ROM v4.8.2 WW [WorldWide])
Unlocking bootloader:
http://4pda.ru/forum/index.php?showtopic=690491&st=1280#entry48200665 (use fastboot oem device-info to check if it's unlocked)
Root:
http://4pda.ru/forum/index.php?showtopic=690491&st=580#entry44778545 (KingRoot - you'll need a 4PDA.ru account to download this)
http://4pda.ru/forum/index.php?showtopic=690491&st=1280#entry48185323 (last section of the post)
CM13:
http://get.cm/?device=P024&type=nightly
https://vasy.ru/CM13/
http://forum.xda-developers.com/android/help/asus-zenpad-8-z380kl-custom-rom-t3370277
http://forum.xda-developers.com/android/development/kernel-asus-z380kl-p024-kcal2-t3405595 (Kernel)
Recovery:
https://vasy.ru/TWRP/P024/
http://4pda.ru/forum/index.php?showtopic=690491&st=1220#entry48094504 (TWRP 2.8.7.0)
http://forum.xda-developers.com/android/help/asus-zenpad-8-0-z380kl-bootloop-t3373051
Guides:
http://4pda.ru/forum/index.php?showtopic=690491&st=1280#entry48185323 (this has a lot of instructions: root, recovery, boot partition restore, adb drivers etc.)
http://forum.xda-developers.com/android/help/asus-zenpad-8-0-z380kl-bootloop-t3373051 (this has a bunch of files, Resurrection Remix [I haven't tested it yet tho], and instructions on getting out a bootloop)
http://4pda.ru/forum/index.php?showtopic=690491&st=1640#entry49724823 (flashing stock software)
If you want to open the engineering menu, type " * # * # 4636 # * # * "
To boot into fastboot, restart/turn on the device and hold volume up. It'll pop you into a menu with three options.
To boot into recovery, from the fastboot screen (three options), use the volume buttons and navigate to the second option "factory reset" and hit power to confirm. It'll boot into recovery.
=====================================================================================
Recommended way to flash ROMs:
1) Download TWRP. Use adb to boot (NOT flash) into TWRP. Flash ROM there.
2) use KingRoot to root. Use Flashify to flash the ROM.
======================================================================================
If you want to go look up some more info or guides, go here:
http://4pda.ru/forum/index.php?act=...=rel&subforums=0&query=z380kl&forums=570&st=0
and use GTranslate to translate the page. The first page is the earliest posts with the keyword, the last page are the latest post.
please add these ROM's for this Device:
Ressurection Remix:
https://www.androidfilehost.com/?w=files&flid=121811
AICP 12.1:
https://www.androidfilehost.com/?w=files&flid=136181
The latest Official ROM P024 model:
http://dlcdnet.asus.com/pub/ASUS/Ee...ser.zip?_ga=1.109506565.1670552787.1483182775
ZenPad 8 Z380KL Firmware: V5.9.0.0 (WW SKU version only)
Improved Item:
1. Update Google security patch
2. Support unlock tool
9008 brick info:
https://4pda.ru/forum/index.php?showtopic=643084
Pertaining to p024:
https://4pda.ru/forum/index.php?showtopic=643084&st=5740
https://4pda.ru/forum/index.php?showtopic=643084&st=3660 (page 179 - 180, 183 - 185 discusses the files needed to unbrick and how you would - CTRL + F Russ and read the people who quote him)
How I bricked: https://4pda.ru/forum/index.php?showtopic=703414&st=180#entry49329798
https://4pda.ru/forum/index.php?showtopic=690491&st=1420#entry48527044 (unbricking files - dead link though)
https://4pda.ru/forum/index.php?showtopic=703414&st=140 (discussing how to fix using the images from the dump)
I see that Lineage OS is supported on Z380KL. However, I found the wiki spec showing Snapdragon 410, but I found Z380KL in Asia with Snapdragon 615. Before I commit, I'd like to know if anyone knows whether LineageOS is fully compatible with Z380KL with Snapdragon 615 chipsets? Thanks.
Special thanks to @a350tv for helping me comb through 4PDA - this process would've been a lot slower or just wouldn't have happened if he hadn't offered to translate guides and download links to me. So most of the credit goes to him.
Flashing TWRP on 6.0.1 (Sept 1, 2016 patch):
1) grab your drivers (W10: boot into "no driver signature verification mode" to install the drivers needed for fastboot)
https://drive.google.com/open?id=1cGcoDCvmTxfXWNTG0iOXHw1WScmYBrKS
2) turn on debugging
3) type in "adb devices", verify that your computer sees your tablet (if you don't have ADB/Fastboot, get https://forum.xda-developers.com/showthread.php?t=2317790)
4) type in "adb reboot bootloader"
5) you'll see three options: 1. Enter SD DL mode, 2. Factory Reset, 3. Exit update mode
6) type in "fastboot devices", verify that your computer sees your tablet
7) grab your TWRP file (http://vasy.ru/TWRP/P024/) and type in "fastboot flash recovery [replace w/ location of the TWRP file].img"
8) once it says "finished", click factory reset mode (use volume buttons to navigate, power button to enter)
9) it should reboot into TWRP, slide to allow modifications
10) Boom, TWRP is installed.
OPTIONAL, BUT HELPS TO KEEP TWRP INSTALLED: Flash Magisk.
That way, stock recovery won't overwrite TWRP when you reboot.
IF YOU WANT TO KEEP TWRP BUT DON'T WANT Magisk:
1) After first boot into TWRP, turn off tablet.
2) Then turn on and hold Volume Up + Power. That will boot you into Bootloader Mode.
3) Go into factory reset and it should boot you into TWRP.
Now, it's safe to boot into the OS.
(TL;DR: Boot into TWRP twice before booting into the OS or else stock recovery will overwrite TWRP.)
Flashing LineageOS:
1) DL LOS from https://download.lineageos.org/P024
2) DL GApps from http://opengapps.org/ (choose 7.1)
3) boot into TWRP
4) go into Wipe, slide to wipe
5) go to Install, click on LOS file > add to queue, click on Open GApps file > add to queue, flash
6) wait til it's done, click "reboot"
7) wait a while (took mine 3 or so minutes to boot)
8) enjoy!
My GDrive folder with all files needed (except ROM and GApps)
https://drive.google.com/open?id=0BzJ-WWaQYXttTkttdHNELVBEc2M
To do:
Use this tutorial to backup all my partitions, just in case I get bricked yet again.
https://forum.xda-developers.com/showthread.php?t=2450045
Links to unbrick device via Asus FlashTool
Links to service ROMs (for use with AFT)
Add original links from 4PDA
ROMs
LineageOS: https://download.lineageos.org/P024
AICP: https://saki-sss.blogspot.com.by/2016/12/z380k-aicp-121.html
Resurrection Remix: https://androidfilehost.com/?w=files&flid=121811
(made by https://androidfilehost.com/?w=profile&uid=457095661767100043, found from http://andmem.blogspot.jp/2016/05/asus-zenpad-8-z380kl-root-rom.html#chapter-19) - abandoned?
seities said:
I see that Lineage OS is supported on Z380KL. However, I found the wiki spec showing Snapdragon 410, but I found Z380KL in Asia with Snapdragon 615. Before I commit, I'd like to know if anyone knows whether LineageOS is fully compatible with Z380KL with Snapdragon 615 chipsets? Thanks.
Click to expand...
Click to collapse
probably not. I think it's only compatible with the SD 410.
xDark_ said:
Special thanks to @a350tv for helping me comb through 4PDA - this process would've been a lot slower or just wouldn't have happened if he hadn't offered to translate guides and download links to me. So most of the credit goes to him.
Flashing TWRP on 6.0.1 (Sept 1, 2016 patch):
1) grab your drivers (W10: boot into "no driver signature verification mode" to install the drivers needed for fastboot)
https://drive.google.com/open?id=1cGcoDCvmTxfXWNTG0iOXHw1WScmYBrKS
2) turn on debugging
3) type in "adb devices", verify that your computer sees your tablet (if you don't have ADB/Fastboot, get https://forum.xda-developers.com/showthread.php?t=2317790)
4) type in "adb reboot bootloader"
5) you'll see three options: 1. Enter SD DL mode, 2. Factory Reset, 3. Exit update mode
6) type in "fastboot devices", verify that your computer sees your tablet
7) grab your TWRP file (http://vasy.ru/TWRP/P024/) and type in "fastboot flash recovery [replace w/ location of the TWRP file].img"
8) once it says "finished", click factory reset mode (use volume buttons to navigate, power button to enter)
9) it should reboot into TWRP, slide to allow modifications
10) Boom, TWRP is installed.
OPTIONAL, BUT HELPS TO KEEP TWRP INSTALLED: Flash Magisk.
That way, stock recovery won't overwrite TWRP when you reboot.
IF YOU WANT TO KEEP TWRP BUT DON'T WANT Magisk:
1) After first boot into TWRP, turn off tablet.
2) Then turn on and hold Volume Up + Power. That will boot you into Bootloader Mode.
3) Go into factory reset and it should boot you into TWRP.
Now, it's safe to boot into the OS.
(TL;DR: Boot into TWRP twice before booting into the OS or else stock recovery will overwrite TWRP.)
Flashing LineageOS:
1) DL LOS from https://download.lineageos.org/P024
2) DL GApps from http://opengapps.org/ (choose 7.1)
3) boot into TWRP
4) go into Wipe, slide to wipe
5) go to Install, click on LOS file > add to queue, click on Open GApps file > add to queue, flash
6) wait til it's done, click "reboot"
7) wait a while (took mine 3 or so minutes to boot)
8) enjoy!
My GDrive folder with all files needed (except ROM and GApps)
https://drive.google.com/open?id=0BzJ-WWaQYXttTkttdHNELVBEc2M
To do:
Use this tutorial to backup all my partitions, just in case I get bricked yet again.
https://forum.xda-developers.com/showthread.php?t=2450045
Links to unbrick device via Asus FlashTool
Links to service ROMs (for use with AFT)
Add original links from 4PDA
Click to expand...
Click to collapse
Thanks for the tutorial, I had already dared to flash twrp recovery before you wrote this tutorial...
I believe my bootloader is still locked. And I could not reproduce/ write exactly what I did. But, in my case, just for information, when I want to go back into twrp, I can boot into bootloader (power volume up) and then option 2 reset the device gives me the twrp... I am not sure if that is how you get it, but for me, I still had twrp.
I think i will install magisk after reading your post.
jutphaas said:
Thanks for the tutorial, I had already dared to flash twrp recovery before you wrote this tutorial...
I believe my bootloader is still locked. And I could not reproduce/ write exactly what I did. But, in my case, just for information, when I want to go back into twrp, I can boot into bootloader (power volume up) and then option 2 reset the device gives me the twrp... I am not sure if that is how you get it, but for me, I still had twrp.
I think i will install magisk after reading your post.
Click to expand...
Click to collapse
I don't think unlocking the BL is necessary for flashing LOS. But yes, that's how I get into TWRP as well.
Hello I'm new in the forum and I write from Italy, yesterday unfortunately I had the brilliant idea to downgrade my Asus z380kl through ADB, Fastboot and TWRP from pc so far so good, I go to flash the new rom and gives me error, I try to restore the backup here too error result? Tablet locked the only way to make it recognize to the PC is with ASUS FLASH TOOL ROM problem in format.raw unobtainable not even on the Russian site. Any good soul has the possibility to let me download it? Thanks, Sorry English but it is a translation of the very useful Google translate.
pucci2 said:
Hello I'm new in the forum and I write from Italy, yesterday unfortunately I had the brilliant idea to downgrade my Asus z380kl through ADB, Fastboot and TWRP from pc so far so good, I go to flash the new rom and gives me error, I try to restore the backup here too error result? Tablet locked the only way to make it recognize to the PC is with ASUS FLASH TOOL ROM problem in format.raw unobtainable not even on the Russian site. Any good soul has the possibility to let me download it? Thanks, Sorry English but it is a translation of the very useful Google translate.
Click to expand...
Click to collapse
Can you still access fastboot, then at least you can flash twrp as described before in this thread and install from twrp lineageos p024 (lineage-14.1-20180105-nightly-P024-signed.zip) and Open gapps to get google playstore etc , select Arm, (not 64) then version 7.1, then Pico would work.
If you have twrp, you at least can still use your asus... I have found no way to flash original stock... stock must not be flashed from twrp.
Since you mention twrp already used, you can try: turn your device off, then press volume up then the bootloader menu comes, select 2: reset to enter twrp(where it says reset. if you had flashed twrp, that is how you can get into twrp) from there, install lineage os and gapps from micro sd card
My rom is MMB29M.WW_P024-V5.9.4-20170613
xDark_ said:
OPTIONAL, BUT HELPS TO KEEP TWRP INSTALLED: Flash Magisk.
That way, stock recovery won't overwrite TWRP when you reboot.
Click to expand...
Click to collapse
I assume this is on stock rom ? What version of magisk would work? I found I can be back at stock with my twrp backup so ..
But magisk 15.3 zip failed to install on stock-
I also used supersu v82 working on stock, or lineageos.
Would you know what magisk works on lineageos?
I like the exsd extension of magisk so I would like to try it on this device, either stock or lineageos
jutphaas said:
I assume this is on stock rom ? What version of magisk would work? I found I can be back at stock with my twrp backup so ..
But magisk 15.3 zip failed to install on stock-
I also used supersu v82 working on stock, or lineageos.
Would you know what magisk works on lineageos?
I like the exsd extension of magisk so I would like to try it on this device, either stock or lineageos
Click to expand...
Click to collapse
Yes it was. I flashed 15.2 on both stock and LOS. I've heard of some issues with 15.x so you can try .2 or 14.x.
pucci2 said:
Hello I'm new in the forum and I write from Italy, yesterday unfortunately I had the brilliant idea to downgrade my Asus z380kl through ADB, Fastboot and TWRP from pc so far so good, I go to flash the new rom and gives me error, I try to restore the backup here too error result? Tablet locked the only way to make it recognize to the PC is with ASUS FLASH TOOL ROM problem in format.raw unobtainable not even on the Russian site. Any good soul has the possibility to let me download it? Thanks, Sorry English but it is a translation of the very useful Google translate.
Click to expand...
Click to collapse
What error was given? What do you see when you connect it to a computer? What does "tablet locked" mean? Would help if you gave some pictures too.
I'm currently in the process of getting the RAW files/service ROMs for AFT but I don't have an ETA on when I'll be able to get that.
No on the tablet I have not installed TWRP and no other recovery.When I go into the original recovery of the tablet there is always the screen with the lock closed at the bottom right and there is no way to show it to the PC even with adb sideload, l 'only program that recognizes me the tablet is Asus flash tool, however, as I have already written the damn ROM in RAW format is untraceable.
pucci2 said:
No on the tablet I have not installed TWRP and no other recovery.When I go into the original recovery of the tablet there is always the screen with the lock closed at the bottom right and there is no way to show it to the PC even with adb sideload, l 'only program that recognizes me the tablet is Asus flash tool, however, as I have already written the damn ROM in RAW format is untraceable.
Click to expand...
Click to collapse
Does it respons to adb devices of fastboot devices in this stage?
no, it is not recognized
Hello everyone, after struggling for a few hours I managed to finally disable force encryption in my phone (so that TWRP could backup the data partition).
I'd like to write a quick list of what I did in the form of a guide to unlocking the bootloader, installing TWRP and getting root with Magisk. I'm just a user, not a developer and this guide is brief, it's not a detailed tutorial and does not include trivial steps (like how to install drivers for your OS).
Warnings: Although small, there is always the chance this bricks your phone. I take no responsibilities.
This will factory reset your phone so back up everything before you start.
My phone is Lenovo S5 (K520) Global version (see screenshot) I don't know if this will work for other firmwares.
Prerequisites:
Install Phone, ADB and Fastboot drives. You can get ADB and Fastboot binaries from here:
https://forum.xda-developers.com/showthread.php?t=2588979
Download this archive:
http://www.mediafire.com/?4dcvzw1hdmzfn10
It contains all the files used in this guide.
Alternatively, download all the files used from their sources.
You will need an SD card or a USB flash drive with an OTG adapter.
Copy the following files to it:
A. "Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip"
(Downloaded from http://forum.xda-developers.com/showthread.php?t=3817389 )
B. "Magisk-v18.0.zip"
(Downloaded from http://forum.xda-developers.com/showthread.php?t=3473445 )
C. (optional) "\stock\boot.img"
(Downloaded from the global firmware @ 4pda)
If you chose to use Micro SD card, you can insert it now.
Note: I know there is a way to push these files directly to TWRP from PC through USB instead of using SD Card/Flash drive but I've never tried it.
Lets start:
1. Go to 'Settings>About phone' and tap on "Lenovo version" several times until developer options are enabled.
2. Go to 'Settings>System>Developer options' and enable "OEM unlocking" (Note: for me this option was greyed out and I had to connect to wifi and wait for a minute or two).
Optional: Enable "USB debugging" if you wish to enter fastboot via ADB.
3. Turn off the phone and press and hold 'Volume down'+'Power' buttons until you see "fastboot mode" on the phone screen (alternatively, don't turn off the phone and instead enter fastboot mode via ADB (adb.exe reboot bootloader)).
4. Connect the phone to the PC via USB and open a command prompt in the location that you installed fastboot binary to.
Type (after each command press enter):
Code:
fastboot devices
To verify that the phone is recognized. And if it is type:
Code:
fastboot oem unlock
Now on the phone LCD navigate to "Yes" with volume buttons and press power to select it.
Your phone will factory reset, this will take a few minutes. Let it finish.
5. Put the TWRP image in your fastboot path. I used "recovery-twrp-3.2.3-crn-seoul(v3.2.3-1).img" downloaded from this URL:
https://forum.xda-developers.com/android/development/lenovo-s5-k520-twrps-t3863860
But I included 2 more files that I found (I did not try them).
6. Enter fasboot mode again and type:
Code:
fastboot flash recovery recovery-twrp-3.2.3-crn-seoul(v3.2.3-1).img
(Substitute "recovery-twrp-3.2.3-crn-seoul(v3.2.3-1).img" with the recovery filename of you choice)
7. If successful, disconnect the USB cable and enter Recovery mode, do not turn off or reboot the phone because upon restart the phone will revert to stock recovery (I.E. delete TWRP).
To enter Recovery mode press and hold 'Volume down'+'Power' buttons until you see "fastboot mode" and from there choose "Recovery mode" with the volume buttons and confirm with the power button.
(Alternatively, you can try holding 'Volume up'+'Power' to directly enter Recovery mode but I found it a little finicky)
8. In TWRP, swipe to allow changes. Press cancel when asked for a password to decrypt data.
If you chose to use a USB flash drive with an OTG adapter, connect it and mount it (Mount>usb-otg).
9. Go to Wipe>format data, type "yes" and confirm (if you have any data like installed apps, contacts etc., it will be deleted).
10. Go to Install and install "Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip".
The files will be in (/external_sd/ or /usb-otg/).
11. Install "Magisk-v18.0.zip"
Important note: If you want to keep encryption (if you don't care if TWRP can't access /data/) and just obtain root, skip steps 9 and 10.
12. Reboot to system and wait for a few minutes for the initial setup.
If for some reason boot fails (nothing happens after 10 minutes) and you can still enter TWRP (hold 'Volume up'+'Power'), then you can revert the changes by restoring the stock boot image (TWRP>Install>Install image>boot.img - put a checkmark on "boot").
If this worked for you, please tell us by replying to this thread.
Thanks a lot man. This phone is a beast in quality/price when talking about hardware. Costs a bit more than 100€ and has the same hard than others at 180-200€ at least. Bad thing is software but with TWRP and root everything is possible . Just found what project treble is, amazing possibilities. Can't beliebe nobody replied yet to yor post. Its a great guide and you show all the sources from where your downloads come. As you said in another thread its better this way so people can trust your content more:
C4lculated said:
I also wanted to root but I didn't want to run a bunch of unknown programs (from XN Logos), so I managed to install TWRP and root with magisk. I wrote a guide on how to do it:
https://forum.xda-developers.com/ge...ide-lenovo-s5-k520-twrp-root-decrypt-t3882402
Click to expand...
Click to collapse
I am yet waiting for my Lenovo S5 to arrive but I will give this guide a try. I was about to follow XN logos (stupdroid) guide/software but I prefer yours. Just one question... have you checked whether the TWRP v3.2.3 (latest) from dmilz make proper working backups? Can I trust that a full backup will be loaded correctly after installing any unofficial ROM, to go back to stock if necessary? I made once the mistake of relying a TWRP and later I found out that one was ok for flashing but didn't create working backups. I asked him also the same question, but I guess you also tried yourself to make a backup and restore from it using TWRP.
Next step will be to flash an Android 8.1 or 9 GSI rom (did I already say I'm amazed by GSI/project treble roms? just found about them last days). I will update you about my luck following your guide
does anyone enable lte bands, 4 and 28?
just bought this phone, currently on shipping..
I'll first try with twrp + aosp 9 GSI
Hi man, have you upgrade to gsi
acost91 said:
Thanks a lot man. This phone is a beast in quality/price when talking about hardware. Costs a bit more than 100€ and has the same hard than others at 180-200€ at least. Bad thing is software but with TWRP and root everything is possible . Just found what project treble is, amazing possibilities. Can't beliebe nobody replied yet to yor post. Its a great guide and you show all the sources from where your downloads come. As you said in another thread its better this way so people can trust your content more:
I am yet waiting for my Lenovo S5 to arrive but I will give this guide a try. I was about to follow XN logos (stupdroid) guide/software but I prefer yours. Just one question... have you checked whether the TWRP v3.2.3 (latest) from dmilz make proper working backups? Can I trust that a full backup will be loaded correctly after installing any unofficial ROM, to go back to stock if necessary? I made once the mistake of relying a TWRP and later I found out that one was ok for flashing but didn't create working backups. I asked him also the same question, but I guess you also tried yourself to make a backup and restore from it using TWRP.
Next step will be to flash an Android 8.1 or 9 GSI rom (did I already say I'm amazed by GSI/project treble roms? just found about them last days). I will update you about my luck following your guide
Click to expand...
Click to collapse
Kindly drop the procedure am hitting brick with all the method i used .????????
Stock firmware lenovo k520
I have tried your method on ROM that is based on China and also globally, and TWRP was successfully installed, and I have also tried several Rom GSI, and only AOSP Extended is successful, but with Bluetooth bugs it cannot be turned on, if others want flash files and stock firmware for k520, just let me know, thanks.
Working on S5 Pro too?
Hi! Can it work on S5 Pro too? I really want to root this device and I don't find out a way to get this happening. Thanks!
Does this work for s5 pro l58041?
Thanks
B4ph0 said:
I have tried your method on ROM that is based on China and also globally, and TWRP was successfully installed, and I have also tried several Rom GSI, and only AOSP Extended is successful, but with Bluetooth bugs it cannot be turned on, if others want flash files and stock firmware for k520, just let me know, thanks.
Click to expand...
Click to collapse
Hi! Sorry for offtopic!
Could you please PM me the link on AOSP extended image which you installed. Thank you!
Hello! Did somebody managed to install GCAM to Lenovo S5? I'm trying and I can;t do this, magisk modules are not loading...
so far I've used 2 alternative rom and works fine, aosp & octopus os, especially octopus os
I need some help..
Did anyone had lenovo s5 persist.img..
I lost my persist afer flashing global rom.208st via qfil..
I check the rom has no persist.img
Please visit to https://youtu.be/wbpV59kutJM for tutorial flash and upgrade Lenovo S5 in YouTube
hello guys, i always get into download mode,after press reboot system (twrp), any solution for my problem ?
has anyone achieved unlocking bands in this phone?
Please port miui 11 9.10.30 mi-room pie 9.0 redmi note 4x SD625 to lenovo S5.
https://megaroms.net/miui-11-9-10-30-stable-port-for-redmi-note-4-4x/
https://sourceforge.net/projects/miui-ports.whats-new.p/files/mido/miroom/
After unlocking bootloader, is there anyway to remove the hideous "software can't check for corruption" warning? Thanks.
---------- Post added at 01:44 AM ---------- Previous post was at 01:39 AM ----------
Suryo75 said:
hello guys, i always get into download mode,after press reboot system (twrp), any solution for my problem ?
Click to expand...
Click to collapse
This means no rom is installed in your phone. Either you accidentally wipe system in twrp, or the rom is corrupted.
Download the deodexed stock rom below and flash with twrp. Should fix your problem.
https://drive.google.com/open?id=13tRqo5eSpRiVJwKiA-iSj2GyIF353ATQ
jychung93 said:
After unlocking bootloader, is there anyway to remove the hideous "software can't check for corruption" warning? Thanks.
---------- Post added at 01:44 AM ---------- Previous post was at 01:39 AM ----------
This means no rom is installed in your phone. Either you accidentally wipe system in twrp, or the rom is corrupted.
Download the deodexed stock rom below and flash with twrp. Should fix your problem.
https://drive.google.com/open?id=13tRqo5eSpRiVJwKiA-iSj2GyIF353ATQ
Click to expand...
Click to collapse
thank you i'll try
Could you plz make tutorial about getting back to stock unroot...thx
Twrp gone
Hello sir thank you for this wonderful tutorial,
But I have a problem , after booting to TWRP , then boot to system after that when I try to go back to recovery mode TWRP , twrp is gone , stock recovery back
Hi there.
I screwed up my MediaPad M5 Lite (Wifi edition: BAH2-W19, EMUI 8 installed. It's a treble compatible device) yesterday and need help.
I did the following steps before it all went down the gutter:
1. I successfully unlocked the bootloader using the DC Unlocker method
2. I downloaded the latest a-only AOSP release of "phhusson AOSP 9.0 v119": system-arm64-aonly-vanilla-nosu.img.xz (https://github.com/phhusson/treble_experimentations/releases)
3. I rebooted into bootloader and flashed the unzipped .img file to the device. The flash was successful as all 4 steps of copieing stuff tot he system partition said "OKAY"
4. now I used "fastboot reboot" and the trouble started. The tablet froze in fastboot mode. It just didn't restart.
5. I turned it of using a long push on the power button. Then it restarted and got stuck at the start screen. I'll attach a screenshot so you know what I am seeing.
6. From now on I was only able to boot into fastboot mode and into the stock recovery. There I did factory reset and cache formatting several times but with no effect.
7. Only thing that still worked was the eRecovery function in the EMUI stock recovery. With this I was able to download some official firmware from Huawei automatically and the tablet was back to stock
8. This night the OS did an auto update to v215.
9. So this morning I repeated the step 2. from above but with a different a-only custom rom and again it didn't work out
10. I tried to use the eRecovery function to get back to stock, but now the recovery is broken and throws an error "Getting package info failed".
I also tried to download older firmware from https://androidhost.ru/ and flash it with the dload method. Without success of course. While doing it I receive an error "Software install failed!". I will attach a screenshot.
Can anybody give me a hint what I could do next to approach the problem?
Best
rob
Well, you didn't had TWRP as recovery, so no nandroid backup available. From one of my experiences with flashing a stock rom for acer, I had to delete some lines of code from the meta inf folder relating the version of the phone, in order to successfully flash it. Maybe the stock ROM you are trying has some lines of code detecting if bootloader unlocked.
Im also having trouble getting a good tutorial for getting rid of the os or just to have magisk on the tablet
You dowoad latest rom and flash stock via hru and. Twrp search xda
unbrick Huawei MediaPad M5 Lite
r0b said:
Hi there.
I screwed up my MediaPad M5 Lite (Wifi edition: BAH2-W19, EMUI 8 installed. It's a treble compatible device) yesterday and need help.
I did the following steps before it all went down the gutter:
1. I successfully unlocked the bootloader using the DC Unlocker method
2. I downloaded the latest a-only AOSP release of "phhusson AOSP 9.0 v119": system-arm64-aonly-vanilla-nosu.img.xz (https://github.com/phhusson/treble_experimentations/releases)
3. I rebooted into bootloader and flashed the unzipped .img file to the device. The flash was successful as all 4 steps of copieing stuff tot he system partition said "OKAY"
4. now I used "fastboot reboot" and the trouble started. The tablet froze in fastboot mode. It just didn't restart.
5. I turned it of using a long push on the power button. Then it restarted and got stuck at the start screen. I'll attach a screenshot so you know what I am seeing.
6. From now on I was only able to boot into fastboot mode and into the stock recovery. There I did factory reset and cache formatting several times but with no effect.
7. Only thing that still worked was the eRecovery function in the EMUI stock recovery. With this I was able to download some official firmware from Huawei automatically and the tablet was back to stock
8. This night the OS did an auto update to v215.
9. So this morning I repeated the step 2. from above but with a different a-only custom rom and again it didn't work out
10. I tried to use the eRecovery function to get back to stock, but now the recovery is broken and throws an error "Getting package info failed".
I also tried to download older firmware from https://androidhost.ru/ and flash it with the dload method. Without success of course. While doing it I receive an error "Software install failed!". I will attach a screenshot.
Can anybody give me a hint what I could do next to approach the problem?
Best
rob
Click to expand...
Click to collapse
Unbrick using Huawei Multi tool .
---------- Post added at 03:14 PM ---------- Previous post was at 03:10 PM ----------
r0b said:
Hi there.
I screwed up my MediaPad M5 Lite (Wifi edition: BAH2-W19, EMUI 8 installed. It's a treble compatible device) yesterday and need help.
I did the following steps before it all went down the gutter:
1. I successfully unlocked the bootloader using the DC Unlocker method
2. I downloaded the latest a-only AOSP release of "phhusson AOSP 9.0 v119": system-arm64-aonly-vanilla-nosu.img.xz (https://github.com/phhusson/treble_experimentations/releases)
3. I rebooted into bootloader and flashed the unzipped .img file to the device. The flash was successful as all 4 steps of copieing stuff tot he system partition said "OKAY"
4. now I used "fastboot reboot" and the trouble started. The tablet froze in fastboot mode. It just didn't restart.
5. I turned it of using a long push on the power button. Then it restarted and got stuck at the start screen. I'll attach a screenshot so you know what I am seeing.
6. From now on I was only able to boot into fastboot mode and into the stock recovery. There I did factory reset and cache formatting several times but with no effect.
7. Only thing that still worked was the eRecovery function in the EMUI stock recovery. With this I was able to download some official firmware from Huawei automatically and the tablet was back to stock
8. This night the OS did an auto update to v215.
9. So this morning I repeated the step 2. from above but with a different a-only custom rom and again it didn't work out
10. I tried to use the eRecovery function to get back to stock, but now the recovery is broken and throws an error "Getting package info failed".
I also tried to download older firmware from https://androidhost.ru/ and flash it with the dload method. Without success of course. While doing it I receive an error "Software install failed!". I will attach a screenshot.
Can anybody give me a hint what could do next to approach the problem?
dnrob
Click to expand...
Click to collapse
You can install these roms only if you can downgrade to update v177 and lower
Like me you need to Unbrick your mediapad m5 lite
First place need to go back in Fastboot mode.
So UNPLUG , turn off , wait a second and turn on with volume Down , when screen blink release power button and keep volume down pressed a second until Fastboot mode
Or, try to boot in Fastboot with volume down + power AND USB plugged in goes into fastboot, or TWRP if you flashed TWRP to RECOVERY2 instead to RECOVERY.
If doesnt work try the same plug or unplug cuz we have Recovery_ramdisk , eRecovery and eRecovery2
WHEN its okay and you can turn on fastboot mode
Second prepair the img's for unbricking
The LEGIT methods its come back stock rom , then you'll be able to do what you want.
Download Huawei Multi-Tools , Huawei Update Extractor and update.zip of your stock ROM and update_data_full
Then use Huawei Update Extractor to extract
system.img ramdisk.img recovery_ramdisk.img From update.app\update.zip and
Cust.img from update.app\update_full_public.zip.
If you have backup of your userdata.img its the time to put all together in the same directory before go futher.
If all its good , you just need to click unbrick.
Maybe i'll soon do a guide for unbrick and prevent brick , and how install twrp without losing data or encryption data
helmuth said:
And just for the complete list:
Volume up + power AND USB plugged in goes into eRecovery (or TWRP, if you flashed TWRP to RECOVERY2 instead to RECOVERY)
Volume up and down + power and USB plugged in forces update via USB (indicated by a little USB-like icon in the recovery circle. The progess bar goes to 5% and waits for input from your PC)
Click to expand...
Click to collapse
RAMDISK238.img, Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip and twrp8.img you will find at
android-hilfe.de->forum huawei-mediapad-m5-lite -> custom-roms-mediapad page-5
Theese custom roms should work:
Andy Yan's LineageOS 17 (Android 10) -> lineage-17.0-20191231-UNOFFICIAL-treble_arm_avN.img.xz
Pierre-Hugues Husson AOSP 10.0 v209 -> system-quack-arm64-aonly-vanilla.img.xz
Following this guide you will loose all your data so be sure to have a backup
This should work for a Mediapad M5 lite BAH2-W19OCEC432-238
Precondition: Unlocked Bootloader / OEM Unlocked / USB Debugging active
1. if you brick your device don`t blame me
2. check, if the version B238 is installed
3. back up your data
4. copy Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip on SD card
Fastboot:
5. boot into Fastboot Mode.
6. flash TWRP -> fastboot flash recovery_ramdisk twrp8.img
7. fastboot reboot recovery (the first time booting should show up the twrp menu)
if the boot message "2. Press Volume up for 3 seconds" appears must do a Factory Reset in the Stock Recovery. After a reboot the TWRP menu shows up. In lineageos you can activate advanced reboot in developer settings to boot in TWRP menu by pressing recovery mode
TWRP:
8. Wipe -> Advanced Wipe -> select data + cache + dalvik-cache -> Swipe to wipe -> back to start menu
9. Install -> Select Storage -> select Mircro SD card -> OK -> select Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip -> Swipe to confirm Flash
10. Reboot -> Bootloader (not System!!!)
Fastboot:
11. fastboot flash ramdisk RAMDISK238.img
12. fastboot flash system lineage-17.0-20191231-UNOFFICIAL-treble_arm64_avN.img
(or AOSP 10.0 v209)
13. fastboot reboot
LineageOS should start.
other custom roms could work as well.......
Edit:
There´s a new version of LineageOS available:
https:######sourceforge.net###projects###andyyan-gsi###files###lineage-17.x###lineage-17.1-20200111-UNOFFICIAL-treble_arm64_avN.img.xz###download
replace ### with /
It works well on my m5lite
It did not work on B239
I am trying now to get back to the stock rom.
I think the problem is with RAMDISK238.img :/
Do you know how to get one for 239?
Thanks !
BesterTrainer said:
RAMDISK238.img, Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip and twrp8.img you will find at
android-hilfe.de->forum huawei-mediapad-m5-lite -> custom-roms-mediapad page-5
Theese custom roms should work:
Andy Yan's LineageOS 17 (Android 10) -> lineage-17.0-20191231-UNOFFICIAL-treble_arm_avN.img.xz
Pierre-Hugues Husson AOSP 10.0 v209 -> system-quack-arm64-aonly-vanilla.img.xz
Following this guide you will loose all your data so be sure to have a backup
This should work for a Mediapad M5 lite BAH2-W19OCEC432-238
Precondition: Unlocked Bootloader / OEM Unlocked / USB Debugging active
1. if you brick your device don`t blame me
2. check, if the version B238 is installed
3. back up your data
4. copy Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip on SD card
Fastboot:
5. boot into Fastboot Mode.
6. flash TWRP -> fastboot flash recovery_ramdisk twrp8.img
7. fastboot reboot recovery (the first time booting should show up the twrp menu)
if the boot message "2. Press Volume up for 3 seconds" appears must do a Factory Reset in the Stock Recovery. After a reboot the TWRP menu shows up. In lineageos you can activate advanced reboot in developer settings to boot in TWRP menu by pressing recovery mode
TWRP:
8. Wipe -> Advanced Wipe -> select data + cache + dalvik-cache -> Swipe to wipe -> back to start menu
9. Install -> Select Storage -> select Mircro SD card -> OK -> select Disable_Dm-Verity_ForceEncrypt_12.21.2019.zip -> Swipe to confirm Flash
10. Reboot -> Bootloader (not System!!!)
Fastboot:
11. fastboot flash ramdisk RAMDISK238.img
12. fastboot flash system lineage-17.0-20191231-UNOFFICIAL-treble_arm64_avN.img
(or AOSP 10.0 v209)
13. fastboot reboot
LineageOS should start.
other custom roms could work as well.......
Edit:
There´s a new version of LineageOS available:
https:######sourceforge.net###projects###andyyan-gsi###files###lineage-17.x###lineage-17.1-20200111-UNOFFICIAL-treble_arm64_avN.img.xz###download
replace ### with /
It works well on my m5lite
Click to expand...
Click to collapse
sasuke988 said:
It did not work on B239
I am trying now to get back to the stock rom.
I think the problem is with RAMDISK238.img :/
Do you know how to get one for 239?
Thanks !
Click to expand...
Click to collapse
https://
pro-teammt.ru/
en/
online-firmware-database/
?firmware_model=BAH2-W19&firmware_page=0
Check out your model (C432C431/...)
Use the huawei extractor to extract the images
Can someone check if this is legit? https://romprovider.com/2019/09/9-1-0-151-b151-firmware-jordan2-l09b/amp/
Raresh T said:
Can someone check if this is legit? https://romprovider.com/2019/09/9-1-0-151-b151-firmware-jordan2-l09b/amp/
Click to expand...
Click to collapse
It's for the 8" screen variant. It won't work on our 10.1"
is there any current custom house for this model because no links work. And on the stock, I have a problem with 5ghz Wi-Fi
You'd better install TWRP,flash FBE-disabler and format data partition
Anyway,firmware can be found at professorjtj.github.io and I recommend you rebrand and update it to EMUI9 to get better treble compatibility
SkipM4 said:
You'd better install TWRP,flash FBE-disabler and format data partition
Anyway,firmware can be found at professorjtj.github.io and I recommend you rebrand and update it to EMUI9 to get better treble compatibility
Click to expand...
Click to collapse
thats an interesting suggestion. could you post some guides on how could someone rebrand their device ?
Any process step by step about how to install TWRP and MAGISK in Galaxy A70 with android 11 (OneUi 3.1)?
I've tryed with the same files and method that i have done with the Android 10 (OneUi 2.5 version) and i can't start in twrp to flash Magisk
And with the metod of install via Odin without Magisk give's me a bootloop
Anyone knows about this process and can help me please?
alanz0r said:
Any process step by step about how to install TWRP and MAGISK in Galaxy A70 with android 11 (OneUi 3.1)?
I've tryed with the same files and method that i have done with the Android 10 (OneUi 2.5 version) and i can't start in twrp to flash Magisk
And with the metod of install via Odin without Magisk give's me a bootloop
Anyone knows about this process and can help me please?
Click to expand...
Click to collapse
This method from @MarvinMod works on Android 11 (i have Android 11 with root):
Root stock android 10 with TWRP and Magisk-
1- With the device off, hold vol up and power till the device turns on. in stock recovery, choose wipe and factory reset. Then reboot. setup using wifi or data and skip as much as possible. open developer options and make sure oem unlock is checked and power off the device.
2- Hold vol up and vol down while plugging device into PC. on the bootloader splash screen, hit vol up to enter download mode.
3- Open odin and uncheck auto reboot in the options tab. Click AP, then add Recovery.tar and click start. You should get a green pass in odin when complete. this next step is tricky so pay attention.
4- Remove the cable then Hold vol down and power till the device screen goes blank, as soon as it does immediately release all keys then press and hold vol up till the warning about unlocked bootloader appears. TWRP should boot.
5- Copy DFE to external sdcard. In Twrp click install, select storage, choose micro sd and then choose DFE then slide right to confirm and install. when complete, go back to the main screen in TWRP.
6- Click wipe, click format data, type yes and click the blue check box in lower right corner. back out and click reboot, click system, click do not install.
7-Setup device as you normally would and make sure to enable dev options. now turn off the device and boot into twrp. (vol up and power till bootloader warning.)
8- Copy Magisk to sdcard, In Twrp click install and choose Magisk, slide right to confirm, Magisk will now install.
9- Click reboot system and choose do not install. The device will reboot and you should now have Magisk in your apps, make sure to update it. If its not there, wait a few minutes and it should pop up.
Congrats, you should now have TWRP and Magisk on rooted stock rom android 10.
kac222 said:
This method from @MarvinMod works on Android 11 (i have Android 11 with root):
Root stock android 10 with TWRP and Magisk-
1- With the device off, hold vol up and power till the device turns on. in stock recovery, choose wipe and factory reset. Then reboot. setup using wifi or data and skip as much as possible. open developer options and make sure oem unlock is checked and power off the device.
2- Hold vol up and vol down while plugging device into PC. on the bootloader splash screen, hit vol up to enter download mode.
3- Open odin and uncheck auto reboot in the options tab. Click AP, then add Recovery.tar and click start. You should get a green pass in odin when complete. this next step is tricky so pay attention.
4- Remove the cable then Hold vol down and power till the device screen goes blank, as soon as it does immediately release all keys then press and hold vol up till the warning about unlocked bootloader appears. TWRP should boot.
5- Copy DFE to external sdcard. In Twrp click install, select storage, choose micro sd and then choose DFE then slide right to confirm and install. when complete, go back to the main screen in TWRP.
6- Click wipe, click format data, type yes and click the blue check box in lower right corner. back out and click reboot, click system, click do not install.
7-Setup device as you normally would and make sure to enable dev options. now turn off the device and boot into twrp. (vol up and power till bootloader warning.)
8- Copy Magisk to sdcard, In Twrp click install and choose Magisk, slide right to confirm, Magisk will now install.
9- Click reboot system and choose do not install. The device will reboot and you should now have Magisk in your apps, make sure to update it. If its not there, wait a few minutes and it should pop up.
Congrats, you should now have TWRP and Magisk on rooted stock rom android 10.
Click to expand...
Click to collapse
alanz0r said:
Any process step by step about how to install TWRP and MAGISK in Galaxy A70 with android 11 (OneUi 3.1)?
I've tryed with the same files and method that i have done with the Android 10 (OneUi 2.5 version) and i can't start in twrp to flash Magisk
And with the metod of install via Odin without Magisk give's me a bootloop
Anyone knows about this process and can help me please?
Click to expand...
Click to collapse
Dont forget to format data
alanz0r said:
Any process step by step about how to install TWRP and MAGISK in Galaxy A70 with android 11 (OneUi 3.1)?
I've tryed with the same files and method that i have done with the Android 10 (OneUi 2.5 version) and i can't start in twrp to flash Magisk
And with the metod of install via Odin without Magisk give's me a bootloop
Anyone knows about this process and can help me please?
Click to expand...
Click to collapse
Here is your fix. Click link and follow instructions to access twrp on Android 11.
Post in thread 'MarvinMods Galaxy A70 Guide. Root, Los 17.1/18.1, Magisk, Stock O.S. Android 10.' https://forum.xda-developers.com/t/...sk-stock-o-s-android-10.4100655/post-84754781
alanz0r said:
Any process step by step about how to install TWRP and MAGISK in Galaxy A70 with android 11 (OneUi 3.1)?
I've tryed with the same files and method that i have done with the Android 10 (OneUi 2.5 version) and i can't start in twrp to flash Magisk
And with the metod of install via Odin without Magisk give's me a bootloop
Anyone knows about this process and can help me please?
Click to expand...
Click to collapse
I have successfully rooted OneUI 3.1 and flashed it on CTK5 firmware (it was suppose for Android 10)
No more crap recovery boot combination
Real great
JakunTech1010 said:
I have successfully rooted OneUI 3.1 and flashed it on CTK5 firmware (it was suppose for Android 10)
No more crap recovery boot combination
Real great
Click to expand...
Click to collapse
So now you don't need to put the USB cable to start twrp?
Hi guys!
I am new here, recently unlocked bootloader (guide)
Eagerly want to flash lineage OS, but can't. Always ended up multiple reboots or some black screen.
Can anyone write step by step guide?
Currently using Android 9 Stock ROM (came back from android 10 stock rom using this method)
Used TWRP from here
Have you read the wiki page for LineageOS for N 6.1?
Info about PL2 | LineageOS Wiki
wiki.lineageos.org
Update: Installed.
NOTE: It is recommended to update your stock ROM to Android 10 before flashing this custom ROM. ( this method )
Just reboot to bootloader and download this TWRP for our Nokia 6.1, boot it (fastboot flash boot twrp.img), and everything will be fine.
Power + Volume Up
and leave power button when you see the android one logo but keep pressing volume up
Now you can flash TWRP.zip file.
Format Data by typing yes
Reboot to TWRP.
Flash latest ROM zip via TWRP
Switch to an alternative slot (if you are on slot a, switch to b if you are on b, switch to a) - (if you don't know where is the option to switch: reboot >> select slot)
Reboot system
Thanks to this guy https://forum.xda-developers.com/t/rom-12-1-unofficial-pixysos-pl2.4454103/
hello @chsiva, I would like to know if when installing the version of lineageOS 19.1 you used the lineageOS recovery, in my case I have reinstalled LineageOS 19.1 more than once without any problem. In fact, it is not so necessary to have the latest version of Android from the manufacturer installed to be able to install this version of lineageOS, I will explain the steps to be successful in the process.
1) Do not leave any custom recovery as permanent.
2) Since I have Windows 10, I had to look for the drivers that really work for Nokia, in which there are 2 drivers that are needed and apply some additional configurations to the main installer, one of them is compatibility with old versions of the operating system.
3) Download the tool that includes fastboot + adb and verify that the device is really recognized by the operating system regardless of the mode in which it is.
4) Being in the stock version, I recommend you to factory reset the device, then configure it.
5) Enter the download mode and through the cmd and in the adb mode use it to change the slot A/B (A or B), In both you will have to install the lineageOS recovery.
6) Having the recovery installed in both Slots (Remember to use Fastoboot to install the recovery) I recommend you to be in Slot B to proceed with the installation of the rom.
7) Then access the recovery, in my case I decided to perform a data format from the recovery and then select the ADB installation, I recommend you disconnect the device before accessing this option, when you access this option, connect the device to the computer (the recovery should indicate that you are in slot b before continuing with this).
8) Install the lineageOS rom and after it finishes, reboot the device and wait for it to boot.
9) When booting into lineageOS, apply settings and then reboot back into recovery mode.
10) Install the necessary Gapps to have the basic services of google, remember to be in slot b to continue, after installation, restart and when starting, connect to a network and configure.
11) The normal thing is that it is configured but in a partial way, the contacts that you have saved in your google account should not appear if you have it saved, if this happens, you only have to reset the device from the factory.
12) When starting again, apply the configuration connected to the network since the gapps are already included in the device, more configuration options should appear than the previous time when you installed the gapps and at the end the contacts should appear.
13) now if you can install magisk in version 25.2 if I'm not mistaken, remember to change the .apk to .zip and from the recovery install it from slot b and reboot.
14) and the last thing you need is to install 2 modules to certify the device with magisk (before this, I recommend you activate the option to hide root from applications, magisk should request a reboot, before rebooting, apply the deny settings of root to the applications that you deem convenient, but those of google if or if they have to be denied, in google services, mark all the options to deny root in its entirety).
15) For this procedure you will need a terminal and from the terminal, type the command (props), then press ENTER and sign the device.
16) and then delete data from play store and google services and then reboot the device and voila, your device is ready to use.
-In the event that you do not have a windows operating system, you can use the virtualbox tool and if it is possible to install the version of windows 7 ultimate, although you will have to install some necessary drivers so that you do not have a problem with the execution of applications from the virtualized system.