Develop Bugs

[RECOVERY][UNOFFICIAL] TWRP 3.3.1-7 Magisk Prepatched ONLY FOR (ROOTED S10+EXYNOS)

After flashing this there is no need to press that key combo (VOL up key + Power + Bixby) to boot into Magisk mode. Just after flashing this image your S10+ will automatically boot up in the Magisk mode. And that key combo (VOL up key + Power + Bixby) will be used to boot your phone directly into recovery mode.
Download : PrePatched TWRP S10+http://www.mediafire.com/file/uq378oaeb6s80hc/Prepatched_Twrp_S10%2B.zip/file
DISCLAIMER : FLASH AT YOUR OWN RISK AND I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE.
IF MY POST IS USEFUL FOR YOU THEN KINDLY PRESS THE THANKS BUTTON
Special Thanks To : All credit goes to @ianmacd For his amazing Work for Twrp and Latest unofficial magisk for S10 family & TWRP Team &
@topjohnwu for his work for Magisk

Installation Instructions for the Rooted Users : Before Installing Kindly Make a Backup Of Your Phone and Internal storage
1. Requires Root : Download The Image File From The Above Download Link. Place It In The Root Of Your /sdcard folder .
2. Run The Following Commands Via Adb Shell
3. After Installation Do Wipe Your Internal storage and Do Not Factory Reset Your Phone Otherwise It Will Cause BOOTLOOP
su
dd if=/sdcard/twrp.img of=/dev/block/platform/13d60000.ufs/by-name/recovery
Click to expand...
Click to collapse

S10+ Exynos or Snapdragon ? or work for both ?

for s10 + exynos version

Just 3 things i wanna ask.
1. But you didnt mention twrp version?
2. Even if we already are on twrp' latest version we need to wipe because its prepatched?
3. We shouldnt ever factory reset or just after first installation? But we can factory reset from settings?

1. Latest Twrp 3.3.1-7
2. if you have a twrp installed then kindly do not flash it.
3. Kindly make a backup from twrp recovery before making a factory reset in case any thing goes wrong

Sorry for such a rudimentary question but are the adb commands done individually after "su" or is that one command line too long to fit in the box? Sorry, I've just been fighting with getting twrp on my phone since last night. Root works fine but after flashing patched img file I can never get it to go into twrp. Always goes to stock recovery even though flash is successful. I originally thought I was messing up the key combo but I have my suspicions. Any help would be greatly appreciated. Thanks

jtford said:
Sorry for such a rudimentary question but are the adb commands done individually after "su" or is that one command line too long to fit in the box? Sorry, I've just been fighting with getting twrp on my phone since last night. Root works fine but after flashing patched img file I can never get it to go into twrp. Always goes to stock recovery even though flash is successful. I originally thought I was messing up the key combo but I have my suspicions. Any help would be greatly appreciated. Thanks
Click to expand...
Click to collapse
UPDATE××Got TWRP to boot the first time. First time system booted fine but I lost root. Did a fresh root per magisk install guide and reflashed twrp.img in root shell. Got twrp to boot again but it continues to boot loop. I only wiped internal with no factory reset. I know it's probably something I'm doing. Any suggestions?

jtford said:
UPDATE××Got TWRP to boot the first time. First time system booted fine but I lost root. Did a fresh root per magisk install guide and reflashed twrp.img in root shell. Got twrp to boot again but it continues to boot loop. I only wiped internal with no factory reset. I know it's probably something I'm doing. Any suggestions?
Click to expand...
Click to collapse
It seems magisk not installed properly. Download latest firmware from Carotix folder Here it have prepatched recovery prepatched ap you need not to do anything you need to reflash recovery n system ...use odin flash patched ap cp bl and use HOME_CSC (you will not use any data apps or anything) Just flash using odin everything will work fine.
also download multidisabler from ian's multidisabler thread HERE put it in phone as need to flash after boot into Twrp!
instructions copied from Carotix thread
Download 4 files from OTA/ODIN FILES then follow this guide:
and put the last Multidisabler in your phone
1- Turn off the device and put it in download mode with the bixby / vol down button and inserting the cable to the PC at this point open Odin remove the check mark from autoreboot
2- Load the AP .tar file downloaded from OTA together with the BL the CP and the HOME_CSC .... if you put the CSC you lose all the data
3- Start the flash and wait
4- At the end you disconnect the phone from the cable and with the power / vol down keys force the switch off as soon as the screen goes black press vol + / bixby / power to go in recovery and don't leave the keys until you see the twrp screen, continue to keep the 3 keys pressed and wait for the recovery to start again
5- Flash the multidisabler then from the main screen choose recovery reboot to boot rooted/magisk system.

comsite said:
It seems magisk not installed properly. Download latest firmware from Carotix folder Here it have prepatched recovery prepatched ap you need not to do anything you need to reflash recovery n system ...use odin flash patched ap cp bl and use HOME_CSC (you will not use any data apps or anything) Just flash using odin everything will work fine.
also download multidisabler from ian's multidisabler thread HERE put it in phone as need to flash after boot into Twrp!
instructions copied from Carotix thread
Download 4 files from OTA/ODIN FILES then follow this guide:
and put the last Multidisabler in your phone
1- Turn off the device and put it in download mode with the bixby / vol down button and inserting the cable to the PC at this point open Odin remove the check mark from autoreboot
2- Load the AP .tar file downloaded from OTA together with the BL the CP and the HOME_CSC .... if you put the CSC you lose all the data
3- Start the flash and wait
4- At the end you disconnect the phone from the cable and with the power / vol down keys force the switch off as soon as the screen goes black press vol + / bixby / power to go in recovery and don't leave the keys until you see the twrp screen, continue to keep the 3 keys pressed and wait for the recovery to start again
5- Flash the multidisabler then from the main screen choose recovery reboot to boot rooted/magisk system.
Click to expand...
Click to collapse
Thanks for your help. I had to do it a little unconventional to get it working. None of the prepatched recoveries that are included in all these firmware downloads would work for me using Odin. Only flashing this twrp.img in a root shell would work. I finally just flashed Beyond rom zip after getting into twrp along with the disabler zip. Boots into rooted system with no problems and I can boot into twrp with no problems as well. Oh yea, I flashed Beyond over ASG8 also. Not sure why I could never get ASH6 to work.

[RECOVERY] TWRP 3.3.1 Changelog
v3.3.1-9_ianmacd for G97[035]F [inc. ASH6 kernel (which also works with ASH1 firmware)] (2019-09-17)
Restore working MTP functionality to TWRP. With thanks to bigbiff for the reference and to Geiti for his commit embodying the same fix.
v3.3.1-8_ianmacd for G97[035]F [inc. ASH6 kernel (which also works with ASH1 firmware)] (2019-09-06)
Kernel rebased on Samsung's ASH6 source code.
[System-as-root] MultidisablerChange log
v1.6 (2019-09-18)
Add support for more variants of A50: A505([YG]N|G).
Fix A205G detection.

Hello kkrraazzyy,
can you please explain how to install your twrp.
I already habe twrp installed. an this rom. --> https://forum.xda-developers.com/s10-plus/development/rom-carhdrom-1-t3938987
But a want to install your twrp to boot always with Magisk without to press any key.
I need your help please.

Any proper YouTube guide video for these things, as flashing/rooting became so complicated with so many steps.... Thank you!

So from my understanding this is the first and only way to have the phno boot into the patched recovery automatically without needing top physically press the button combo? Or have I missed something Was just expecting there to have been a lot more attention that's all.
This has actually what has been one of the main reasons holding me back from rooting as it reminds me back in the day of tethered and untethered jailbreaks for iPhones.
Except that this is just a inconvenience while tethered would make the phone practically unusable.

Is there an app i can use to backup and restore my kik chats? I got a new phone, a Samsung Galaxy 10+ and want to tramsfer my kik chats and save data for Digimon Heroes! to my new galaxy 10+ i dont have root on either phones is there a app (apk) or one i can downlod on my laptop to make the backup of them so i can bring them over. Please i only have a dew days left to transfer my number over and have my old phone shut dwn by my previous provider. I need to do it on the next 2 days.

qaz015393 said:
Is there an app i can use to backup and restore my kik chats? I got a new phone, a Samsung Galaxy 10+ and want to tramsfer my kik chats and save data for Digimon Heroes! to my new galaxy 10+ i dont have root on either phones is there a app (apk) or one i can downlod on my laptop to make the backup of them so i can bring them over. Please i only have a dew days left to transfer my number over and have my old phone shut dwn by my previous provider. I need to do it on the next 2 days.
Click to expand...
Click to collapse
Use Smart Switch by Samsung, it includes the possibility of transferring all your data and settings using a USB cable. I transferred everything from my old phone to this one (S10+ SM-G975F). I don't know if it will work on non-Samsung devices, but it's worth a try.

I have android 10 on my s10+, will this twrp work with android q?

possible to boot without root permissions too?

:good:

Hi @kkrraazzyy , could you show us how you did it?
because @ianmacd https://forum.xda-developers.com/ga...covery-twrp-3-3-0-galaxy-s10-exynos-t3924856/
latest version does not seem to provide this awesome function.

[Guide] Root Galaxy A10 Magisk prenormal rmm/kg state (October Patch- later)

Hi All this is just a quick tutorial to help you all root your devices, on later firmwares
This 100% works ive done it over and over without any problems. I am currently on october patch latest firmware for my A105FN. As you may know Samsung have now added extra security meaning even if you have already unlocked your bootloader after you patch the firmware with magisk, flash patched firmware and reboot you will be greeted with that dreadfull message, Only official binaries allowed and your device will be locked and wont boot untill you reflash stock firmware again. The below will help get you out of the prenormal kg state, and save's you a 7 days waiting period as we dont have any TWRP available for our device at this time. Also note due to the extra security magisk cant be flashed with the whole firmware no more, as each time you flash the firmware your back at square 1.
Note: You will need 7-zip - google is your freind
1. Download odin: https://odindownloader.com/download/odin3-v3-13-3.
2. download the latest stock firmware for your device via SamMobile
3. Download latest Magisk Manager - https://www.google.co.uk/amp/s/forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445/amp/
4. Flash latest firmware via odin and let device boot up and finish setting up.
5. Grab Your Firmware AP_A105FXXXX.tar.md5 remove the md5 so its a tar file makes it easier to work with. Copy it to your device storage.
6. Install latest magisk manager, and open check advanced settings to make sure recovery is checked, select install image / patch image and select the AP file you put on your device, magisk will patch and save as magisk_patched on your internal storage. Copy this back to your pc and extract it.
7. Download this https://forum.xda-developers.com/attachment.php?attachmentid=4818715&d=1568308074 thanks to @droidzer1 and extract the vbmeta.img.
8. Make a new folder on you pc it's temporary so you know where your files are. From the Ap magisk_patch.tar you extracted, copy the boot.img, recovery.img, and the downloaded vbmeta.img from step 7. And place them in the new folder you created, using your mouse select all 3 and right click select 7-zip add to archive, select tar format and name it magisk.tar.
9. Now we have all the files ready back to your device, if your bootloader is already unlocked skip this step and move to the next. For those that havent unlocked there bootloader go to settings - about phone - Software Information - tap multiple times on "Build number" - This will open developer option.
Now in settings at the end, you will have new option "Developer options" - look for OEM unlocking - Enable it, if the OEM switch is not there proceed to step 10. If it is and you enabled it it might ask you to factory reset if not it will be this way to complete the unlock bootloader.......
switch off your device and reboot to download mode.
To put device in download mode - Press Volume Up & then Press Volume Down (Keep holding both) and connect device to PC with USB cable
When device start to download mode, long press volume up to unlock the bootloader. This will wipe your data and automatically reboot.
10. Remove any account you have on your device go to settings, look for time and date automatic time zones, turn it off and set date back 8 days from now (example 30th today change date to 22nd) restart device. Now go straight back into automatic time zones settings and turn it back on. Again reboot device, when device reboots turn it off. You can now enter download mode and it should say checking instead of prenormal that means you good to go. Those of you that had no OEM switch in developer mode please now check.... if it's there enable it and go back to step 10 unlocking bootloader then proceed to step 11.
11. Open odin and select in the ap tab the magisk.tar you created earlier. Plug in your usb whilst holding vol-up and vol-down together to boot into download, press vol-up to proceed. Press start on odin and soon as it finishes and device reboots and you see the bootloader message hold power and vol-up until into stock recovery, select wipe factory reset then select reboot device, this the same as soon as you see bootloader unlocked message hold power and the vol-up together this time count to 7.... and release. Phone wont boot it will go blackscreen and reboot, dont worry this is normal, again do the exact same at bootloader unlocked msg screen hold power and vol-up count to 7... release, now phone will boot and you can set it up.
Note: you will need to reinstall magisk manager and on 1st open it will ask do to additional setup, let it do its thing, then device will reboot,
Remeber every time your device reboots you will have to do the power and vol-up to boot system with root.
I hope this guide help you and a big thank you to @afaneh92 for his original guide

thnaks man
how do i install twrp?
if it is possible, can i flash GSI?

tttt7hhhhjjjk said:
thnaks man
how do i install twrp?
if it is possible, can i flash GSI?
Click to expand...
Click to collapse
No the twrp that was made for our device, wont work with new versions of magisk, or any newer firmware we are going to have to wait until the the new kernel source is released by samsung unfortunatly, its impossible to say when or if they do.... so its just root for now.

mikeyb123 said:
No the twrp that was made for our device, wont work with new versions of magisk, or any newer firmware we are going to have to wait until the the new kernel source is released by samsung unfortunatly, its impossible to say when or if they do.... so its just root for now.
Click to expand...
Click to collapse
thanks for the fast reply man :good:

I gave up rooting this phone, ended up bootloop 3 times and always has to flash it to get the phone working again

timba123 said:
Any chimeratool tricks for no oem unlocking in developer options? On a102u1
Click to expand...
Click to collapse
no.. chimera tool cant unlock the bl on usa variants

hello Thanks for this method but not working after install again magisk manager , say app magisk is not installed and not root
When I was creating the magisk_patch file with magisk manager go to advanced settings and check recovery mode
is it correct?

[GUIDE][TWRP-ROOT] Samsung Galaxy A50 ASL3 Firmware, December 1, 2019 Software Update

Rooting Galaxy A50 Android 9 Pie with TWRP and Magisk ASL3 Firmware for December 1, 2019 Software Update
1. Make sure the bootloader are unlocked, OEM unlock option is grey
2. Enter Download Mode : Turn Power Off. Press and hold Volume Up key + Power Key, When Samsung Logo appears release Power Key only, keep pressing Volume Up key until Android Recovery Mode Appears. Select Reboot to bootloader.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
3. Connect to the phone to computer
4. Flashing TWRP_3.3.1_A50_A505_ASK9_MAGISK_PATCHED.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
5. DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
6. Select Wipe -> Format data.
7. Copy multidisabler-samsung-2.2.zip to phone
8. Install multidisabler-samsung-2.2.zip
9. Select Reboot to Recovery
10. Setup the phone
11. Connect the phone to Internet wait for a moment, make sure OEM unlock option is grey
Install Magisk Manager. Magisk Manager will ask to do additional setups. Let it do its job and the app will automatically reboot your device. Done!
Download:
Download Magisk Manager v7.4.0
Download TWRP_3.3.1_A50_A505_ASK9_MAGISK_PATCHED.tar and multidisabler-samsung-2.2.zip
NOTE: If you lost root after restart it, to root it again: enter TWRP recovery and reboot to RECOVERY
Watch this Video:

Works perfectly on ASK9, thanks!

Hi I am on 4ASK1 this would work for me?

JABS_2109 said:
Hi I am on 4ASK1 this would work for me?
Click to expand...
Click to collapse
It may be works, you can try it. I don't test all version of the firmware

I did all
But my device is keep restarting itself
But if i booted to system no problems happened but the root access lost

hammohammo said:
I did all
But my device is keep restarting itself
But if i booted to system no problems happened but the root access lost
Click to expand...
Click to collapse
You have to downgrade magisk to the version 19.3 because the TWRP is patched with magisk 20.1 (unusable version for the a50)

is there a compatible version of TWRP for the new released Android 10 A50 update yet?

TWRP & Root Samsung Galaxy A51 SM-A515F One UI 2.5 CTJ1 Android 10

Assalom-o-Alaikum!
How to Root and Flash TWRP on Samsung Galaxy A51 One UI 2.5 Android 10 CTJ1 Build number- Android security patch level: 1 October 2020. It may be work for SM-A515F, SM-A515F/DSN, SM-A515F/DS, SM-A515F/DST, SM-A515F/DSM, SM-A515F/N, SM-A515U, SM-A515U1, SM-A515W, PLEASE LET ME KNOW IF IT WORKED. This TWRP version is 3.5.0_10-1 developed and brought to you by [email protected] senior developer. You need installed TWRP for rooting or installing custom rom. Use it at your own risk! Follow the instructions carefully and Make sure to backup all your important data!
Downloads
Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Enable OEM unlock and USB debugging options ( Settings -> Developer options )
Make sure the bootloader are unlocked.
Download and Extract ODIN v3.13.1 from https://odindownload.com/SamsungOdin/
Download and Install Samsung Mobile Phone Drivers
Download Latest Magisk and Magisk Manager
Download twrp-a51-3.5.0_10-1_ianmacd.tar
Download Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
Flashing TWRP on Galaxy A51 CTJ1 firmware Android 10 Q :
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing twrp-a51-3.5.0_10-1_ianmacd.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Install – select Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip Swipe to confirm Flash
Select Reboot to Recovery
Select Wipe -> Format data, type ‘yes’ and confirm
Select Reboot to System
Setup the phone, Done!
Rooting Instructions
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Install Magisk Magisk-v21.2.zip or latest
Select Reboot to System
Connect the Phone to Internet
Open Magisk Manager ( If you can not see it, just wait for a moment)
Done! You can use Root Checker to check it, Enjoy!
If something goes wrong and you want to unroot it, just flash the ROM to make it works again.
Notes / Warning!
Use at your own risk, I’m not responsible for bricking your device.
Using the incorrect file may brick your device.
If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
If you have a KNOX-enabled device, Rooting will trip the KNOX WARRANTY VOID status !
If your device storage is encrypted, Rooting will wipe your data !
If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
Make sure to backup your important data before root it.
Video Link:
Credit:
1. @ianmacd
2. @redymedan

Mohd Masab said:
Assalom-o-Alaikum!
How to Root and Flash TWRP on Samsung Galaxy A51 One UI 2.5 Android 10 CTJ1 Build number- Android security patch level: 1 October 2020. It may be work for SM-A515F, SM-A515F/DSN, SM-A515F/DS, SM-A515F/DST, SM-A515F/DSM, SM-A515F/N, SM-A515U, SM-A515U1, SM-A515W, PLEASE LET ME KNOW IF IT WORKED. This TWRP version is 3.5.0_10-1 developed and brought to you by [email protected] senior developer. You need installed TWRP for rooting or installing custom rom. Use it at your own risk! Follow the instructions carefully and Make sure to backup all your important data!
Downloads
Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Enable OEM unlock and USB debugging options ( Settings -> Developer options )
Make sure the bootloader are unlocked.
Download and Extract ODIN v3.13.1 from https://odindownload.com/SamsungOdin/
Download and Install Samsung Mobile Phone Drivers
Download Latest Magisk and Magisk Manager
Download twrp-a51-3.5.0_10-1_ianmacd.tar
Download Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
Flashing TWRP on Galaxy A51 CTJ1 firmware Android 10 Q :
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing twrp-a51-3.5.0_10-1_ianmacd.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Install – select Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip Swipe to confirm Flash
Select Reboot to Recovery
Select Wipe -> Format data, type ‘yes’ and confirm
Select Reboot to System
Setup the phone, Done!
Rooting Instructions
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Install Magisk Magisk-v21.2.zip or latest
Select Reboot to System
Connect the Phone to Internet
Open Magisk Manager ( If you can not see it, just wait for a moment)
Done! You can use Root Checker to check it, Enjoy!
If something goes wrong and you want to unroot it, just flash the ROM to make it works again.
Notes / Warning!
Use at your own risk, I’m not responsible for bricking your device.
Using the incorrect file may brick your device.
If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
If you have a KNOX-enabled device, Rooting will trip the KNOX WARRANTY VOID status !
If your device storage is encrypted, Rooting will wipe your data !
If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
Make sure to backup your important data before root it.
Credit:
1. [email protected]
2. Recovery-Mode
Click to expand...
Click to collapse
Keep up to making the next tutorial on Galaxy A51

Hello
Mohd Masab
It's my first Samsung .I had 4-5 Sony ,easy to root ,a Doogee S90 (NEVER BUY THAT !).
Is your method safe ,have U seen bad effects ,what fonctions did U lost ?
Bye .
Fred

Okay, so I completed the whole process, here are my observations:
The method provided above almost works. The problem is, that everytime you reboot to system when you are not rooted, TWRP will encrypt your files. So the solution is, that you have to format data and then install dm_verity and Magisk after each other, without a reboot! After that, you can boot to your system and set up your phone.

hargitomi said:
Okay, so I completed the whole process, here are my observations:
The method provided above almost works. The problem is, that everytime you reboot to system when you are not rooted, TWRP will encrypt your files. So the solution is, that you have to format data and then install dm_verity and Magisk after each other, without a reboot! After that, you can boot to your system and set up your phone.
Click to expand...
Click to collapse
I did what you said but still encrypts after reboot. Latest Magisk.

Hi, I am having problems with internal storage, I can not create folders and there are applications that I can not download, any solution?

Could someone tell me if it is compatible with the November update CTK1?
I have managed to root the phone, you can install everything and configure it, but after turning off the phone, I can't start it does bootloop, and it returns to the prompt "The phone is not running Smasung official software ..." never finishes starting? What do you recommend me to do?
020221
I reloaded the original rom and did the procedure again, taking into account the clarification of installing install dm_verity and Magisk after each other, without a reboot, and everything went well!

Hello abraxasboot !
So,for you ,the only problem was that U had to flash the files one after the other without rebooting ?
No other problem since that ?
Is the phone reacting well ?
Where did U find the official rom ?
Thanks and have a good day !

It worked for me but i can't access themes and other system apps
Is there any solution to access themes on rooted a51

Everything working well for me, thanks !
For ameer419 ,maybe try to flash Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip after EACH other thing U flash in TWRP ...
Good luck !

Hello everybody !
Bootloop til this morning ,maybe my fault :I erased system apps such as Facebook ,Youtube ...nothing very important .
I tried to start the procedure at the begining ,it doesn't work ...
Any idea from anyone ?
Thanks .

fleafred said:
Hello abraxasboot !
So,for you ,the only problem was that U had to flash the files one after the other without rebooting ?
No other problem since that ?
Is the phone reacting well ?
Where did U find the official rom ?
Thanks and have a good day !
Click to expand...
Click to collapse
How are you fleafred, https://samfrew.com/es/model/SM-A515F/ here you will find the original rom. I did the procedure again and had no more problems.

Cool ,I couldn't find it!
Just have to wait for 9h now ...
Thanks a lot ,abraxasboot ,I'll tell u.
Have a nice day .

It worked !
Ouf !Thanks a lot ...
I could re-install Magisk ,Xposed ...
I'd have like to know what I desinstalled to do that ...
Have a nice day .

Thank you very much, brother. You did the perfect way

== important ==
I was unable to flash and reboot into TWRP recovery after applying the official Samsung update from March, which updates Android from 10 to 11. Reboot into recovery would not work and I would always end in a boot loop.
I had to downgrade to Samsung's official Android 10 and used the binaries from January for that: https://samfrew.com/es/model/SM-A515F
After that, flashed TWRP again and was able to boot into recovery right away as it should be

If I follow the steps and flash twrp-a51-3.5.0_10-1_ianmacd.tar file using Odin I get an message:
'Only official release binaries are allowed to be flashed (RECOVERY)
The phone was recently purchased from Samsung official store, and has android 10 official firmware from feb 1st installed
Any clue please?

hey guys i used a lyf wind 1 to flash lineage os using twrp ..... so i wiped the previous os and unknowingly flashed another unsupported version of twrp ...when entering to recovery menu its all blank .... now i have no os and recovery ...... i couldnt flash stock rom because my device is not recognised as qualcomm port .............
pls any help ????

I have a working 11R twrp and all the DRM passers mejestics etc. to run.. you can boot the os after that that is the standard Samsung OS. np u can install LINAGE os 18.1 Andys march release, the Mejestics meaning u can patch root without Needing to part the orignal Firm and copy boot.img over. etc
Here is Link With GSI as Well and 2.5 GUI Twrp working and UI3.0
Google Drive: Sign-in

antuanix46 said:
If I follow the steps and flash twrp-a51-3.5.0_10-1_ianmacd.tar file using Odin I get an message:
'Only official release binaries are allowed to be flashed (RECOVERY)
The phone was recently purchased from Samsung official store, and has android 10 official firmware from feb 1st installed
Any clue please?
Click to expand...
Click to collapse
All good in the end, I needed to install samsung's firmware in odin first
Thank you for the good work

[GUIDE][A107M] BL Unlock, Twrp, ROMs and Magisk

I am not responsible for any damage to your device, when you root you lose the Warranty
This guide collects A107F development info, but with the files ported to the A107M.
Thanks to the Galaxy A10s Development team for the original files.
You need to be on Android 10, if you are on android 11, there are tutorials to downgrade.
[BootLoader Unlock]
- Backup all your media, this process will delete your internal media including music and photos
- Go to developer settings and enable [OEM Unlock]
- Reboot to download mode (Turn off, press VOL- & VOL+ and connect the USB)
- When prompted, press and hold VOL + to enter bootloader unlock mode
- Press VOL + to confirm you want to unlock bootloader, this will wipe your data
- If you think the bootloader is fully unlocked, it is actually not! Samsung introduced VaultKeeper, meaning the bootloader will still reject any unofficial partitions before VaultKeeper explicitly allows it.
- Go through the initial setup. Skip through all the steps since data will be wiped again later when we flash TWRP and magisk
- Enable developer options, and confirm that the OEM unlocking option exists and is grayed out. This means the VaultKeeper service has unleashed the bootloader. This step is MANDATORY
- Perfect! Your bootloader now accepts unofficial images in download mode.
[Twrp Install]
At this point, you will need to install Odin on your PC.
Bootloader unlocked is OBLIGATORY.
On your MicroSD, put the "A10s-encryption-disabler.zip" file.
Boot to download mode, load "VBMeta" file in AP and "TWRP Ported to A107M" file in BL
- Disable [Auto Reboot] in Odin
- Flash
- Force a reboot by pressing VOL+, VOL - and POWER buttons at the same time
- With the USB connected, and after the screen goes black, IMMEDIATELY let go of all buttons and IMMEDIATELY press and hold VOL+ and POWER button at the same time to boot to TWRP Recovery
NOTE: TWRP on this phone is not perfect, after booting to it, the screen will remain black after the Samsung logo disappears, simply wait 10 seconds and press the power button 2 times to have acces to it.
- After booting to TWRP successfully, go to WIPE in TWRP
- At the bottom, you should see an option to FORMAT DATA. After you select it, you will be asked to type "yes" in your keyboard. If you do not see this, you probably selected the wrong option.
- After formatting data, flash the "A10s-encryption-disabler.zip" with TWRP. This is done to avoid future bootloops.
- Optional, flash "Magisk.zip" if you want to keep on Stock ROM with root.
- After doing this, boot back to system and you are done
- Wait patiently for the device to boot for the first time
[Custom ROMs Install]
Bootloader unlocked and TWRP isntalled are OBLIGATORY.
Most of the GSI ROMs of this forum works fine on this device.
Only download a64 ROMs, do not confuse with ARM64.
On your MicroSD, put the ROM image.
- Boot to TWRP
- Go to Wipe > Advanced
- Wipe ONLY the System partition
- Go to Install
- At the bottom, select option "Install Image"
- Search for your GSI. It should be something that ends in .img. If it ends in .xz instead, you need to extract the image first
- Optional, if you want Root, flash the "Magisk.zip" file
- Go to recovery main menu
- Go to Reboot
- Reboot to Recovery
- After that, go to Wipe and perform a Factory Reset
- Reboot to System and enjoy!
[Downloads]
>Everything you will need<

I had a problem in Odin an "RQT-CLOSE" error occurred

Lukas203 said:
I had a problem in Odin an "RQT-CLOSE" error occurred
Click to expand...
Click to collapse
I GOT THE SAME THING WHATS HAPPENNING?

Worked perfectly on a107m with binary 6

Alexander_SlowD said:
Worked perfectly on a107m with binary 6
Click to expand...
Click to collapse
If it worked for you, what procedure did you follow? What rom did you use for bit 6? what tools did you use?

It worked for me at first time I see TWRP menu but I didnt followed the instructions correctly , I've tried to do it by myself after that , then I got a unnoficial bootloader error and RQT_CLOSE error when trying to do the Odin process again .
Any working solution are welcome and I will be thankfully , please !

Luciannus said:
It worked for me at first time I see TWRP menu but I didnt followed the instructions correctly , I've tried to do it by myself after that , then I got a unnoficial bootloader error and RQT_CLOSE error when trying to do the Odin process again .
Any working solution are welcome and I will be thankfully , please !
Click to expand...
Click to collapse
The TWRP is slready working for me , now I trying the Magisk part , I did this on Android 11 binary 6 trough A107MUBS6CWA3_ZTO firmware ...