I have LG G4 815 SEA with 10b
Can install EUR firmware like 10c or 10d ?
Or should I wait for OTA update
Thanx
please any one can help?
I have the exact same concern as you, due to the 10C-SEA-XX has ****ty battery life (or maybe it's just the phone...?)
I think it should be fine, but i'm not using a PC right now so i can't go through with the KDZ flashing steps.
Yes, It can be
like me, H815T-HKG 10b can flash to H815-EUR 10c
but I show up a warning about the cust is not the correct region
I am going to find a way to fix it (cuz I saw some rom can remove the cust warning
and it lost my volte and 4G+ function
thanx all , i flashed 10d-OPT2 and it is great , finally my touch work fine
Hello
Please I need your help.
A friend of mien purchased the zenfone 2 at B&h 16GB versions. IT says "US".
It bring me the phone, bu it remains stuck on the booting screen, I've managed to upload the official WW_ FW with ADB sideload.
Now the 3g nor SMS does not work, I can not create new APN with the needed parameters, it is not saved and it disappears after it is created.
I guess it is a modem FW issue and I need to reflash the US_ sku intead the WW_ sku, but i can not find the US_ FW nowhere.....
Any help will be great !!
Thank you
Hello,
I bought a Zenfone 3 Deluxe ZS570KL Gold with the Snapdragon 821 and 64 GB of ROM.
In my country this device is exclusive of a carrier, but it works with every other carrier. The problem is that the dual SIM feature is disabled.
I can't flash the official Worldwide firmware because the recovery has a different SKU, specific to the carrier in question.
I would like to flash the original recovery, in order to install the official worldwide firmware, but I can't find it on internet.
Can someone help me?
Thanks in advance.
I don't think we can dump recovery.img without unlocking bootloader....
which is impossible as far as I know (at the moment)
I managed to flash the original firmware using fastboot. I converted system.new.dat to system.img by using this tool.
Now the device's SKU is WW, which is right. The problem is that the second SIM doesn't work anyway.
I flashed everything from the archive with fastboot, but the dual SIM settings menu doesn't appear.
By the way, the phone model is Z016S, while the "normal" one is Z016D. Perhaps the "S" stands for "single" and the "D" for "double"?
You could go to zentalk forums and report your problem over there, sadly with no bootloader for 5.7, we can't do much here until then. 5.5 is the only lucky for one for now to have unlock bootloader.
An ASUS Live Chat operator said that my specific model doesn't have hardware support for the second SIM, the problem isn't just software.
I guess I'll have to replace the phone with the right model...
Dany_81 said:
I flashed everything from the archive with fastboot
Click to expand...
Click to collapse
Hello !
I'm also looking to change SKU on my ZS570KL Z016S.
From SKU_TIM to SKU_WW.
I already converted system.new.dat to system.img.
1) What are all the files list to flash ?
system.img ; boot.img ?
2) Does the recovery partition need SKU matching with system.img ?
If yes, where to find recovery.img with SKU_WW ?
3) How to dump all my partitions images before flash ?
I want to backup my img with SKU_TIM if possible.
Thank you very much !
Why not just download the system image from Asus support?
Blues-n-Blazin said:
Why not just download the system image from Asus support?
Click to expand...
Click to collapse
Asus provide only zip image for SKU_WW and I have SKU_TIM.
I think the phone does not allow officially to flash a different SKU.
I don't know the good procedure to switch from SKU_TIM_4.11.40.1070 to SKU_WW_4.12.40.1698
Asus bootloader unlock tool is finaly out but require FW version 4.12.40.1698 and above.
Can you help me ? Thank you very much !
After preliminary investigation, I see that the SKU is defined in firmware emmc_appsboot.mbn & translated to the android prop via init in boot.img.
Dany_81 said:
Hello,
I bought a Zenfone 3 Deluxe ZS570KL Gold with the Snapdragon 821 and 64 GB of ROM.
In my country this device is exclusive of a carrier, but it works with every other carrier. The problem is that the dual SIM feature is disabled.
I can't flash the official Worldwide firmware because the recovery has a different SKU, specific to the carrier in question.
I would like to flash the original recovery, in order to install the official worldwide firmware, but I can't find it on internet.
Can someone help me?
Thanks in advance.
Click to expand...
Click to collapse
Here you go (SD820 variant): https://drive.google.com/file/d/0B8rpJsF4EG0YZ1FQSkUxRW9TdWs/view?usp=sharing
adwinp said:
After preliminary investigation, I see that the SKU is defined in firmware emmc_appsboot.mbn & translated to the android prop via init in boot.img.
Click to expand...
Click to collapse
I'm a very beginner with Android.
I installed ADB and Fastboot and everything works.
I can read properties with ADB :
[ro.build.asus.sku]: [TIM]
[ro.config.CID]: [TIM]
[ro.product.carrier]: [IT-ASUS_Z016S-TIM_Z016]
[ro.build.csc.version]: [TIM_ZS570KL_4.11.40.1070_20160922]
I'm looking to switch SKU from TIM to WW
I can't unlock bootloader because tool require FW version 4.12.40.1698 and above.
No one provides updates for the SKU TIM.
Now I downloaded your bootstock.img and recovery.img for SD820.
I converted system.img from official Asus system.new.dat (WW_4.12.40.1698).
What is the best way to change SKU ? (ZS570KL SD820 64GB)
Thank you very much !
Dany_81 said:
I managed to flash the original firmware using fastboot. I converted system.new.dat to system.img by using this tool.
Now the device's SKU is WW, which is right. The problem is that the second SIM doesn't work anyway.
Click to expand...
Click to collapse
You could make a guide of how did you change the sku? Thanks so much. I'm not able
Dany_81 said:
I managed to flash the original firmware using fastboot. I converted system.new.dat to system.img by using this tool.
Now the device's SKU is WW, which is right. The problem is that the second SIM doesn't work anyway.
Click to expand...
Click to collapse
Did you just flashed the system.img? Or any other partition?
kitnoos2002 said:
I'm a very beginner with Android.
I installed ADB and Fastboot and everything works.
I can read properties with ADB :
[ro.build.asus.sku]: [TIM]
[ro.config.CID]: [TIM]
[ro.product.carrier]: [IT-ASUS_Z016S-TIM_Z016]
[ro.build.csc.version]: [TIM_ZS570KL_4.11.40.1070_20160922]
I'm looking to switch SKU from TIM to WW
I can't unlock bootloader because tool require FW version 4.12.40.1698 and above.
No one provides updates for the SKU TIM.
Now I downloaded your bootstock.img and recovery.img for SD820.
I converted system.img from official Asus system.new.dat (WW_4.12.40.1698).
What is the best way to change SKU ? (ZS570KL SD820 64GB)
Thank you very much !
Click to expand...
Click to collapse
Hallo Kitnoos,
finally I have de-brand the zf3d w/o unlock the bootloader, w/o any data loss, just hold the breath for 5 minutes :laugh:
I've used sdat2img.py for convert the asus system.dat to system.img, looking for some guide here on xda... the required files are system.transfer.list and system.new.dat...
Now the phone tell me "WW.4.12.40.1698.20161228"... bye bye sku TIM :laugh::laugh:
macsax said:
Hallo Kitnoos,
finally I have de-brand the zf3d w/o unlock the bootloader, w/o any data loss, just hold the breath for 5 minutes :laugh:
I've used sdat2img.py for convert the asus system.dat to system.img, looking for some guide here on xda... the required files are system.transfer.list and system.new.dat...
Now the phone tell me "WW.4.12.40.1698.20161228"... bye bye sku TIM :laugh::laugh:
Click to expand...
Click to collapse
Hello !
Have you just converted system.dat to system.img(Raw EXT4) with sdat2img.py ?
Or after that you have converted system.img(Raw EXT4) to system.img with img2simg.exe ?
What is the size of the final system file you have flashed ?
Thank you very much !
kitnoos2002 said:
Hello !
Have you just converted system.dat to system.img(Raw EXT4) with sdat2img.py ?
Or after that you have converted system.img(Raw EXT4) to system.img with img2simg.exe ?
What is the size of the final system file you have flashed ?
Thank you very much !
Click to expand...
Click to collapse
i've used only sdat2img.py, because img2simg.exe won't work on my win10 virtualized...
then I've flashed system.new.img in fastboot mode, just "fastboot flash system system.new.img"
system.new.img is 4.026.286.080 byte (4,03 GB on disk)
enjoy your WW sku
:laugh::laugh:
macsax said:
i've used only sdat2img.py, because img2simg.exe won't work on my win10 virtualized...
then I've flashed system.new.img in fastboot mode, just "fastboot flash system system.new.img"
system.new.img is 4.026.286.080 byte (4,03 GB on disk)
enjoy your WW sku
:laugh::laugh:
Click to expand...
Click to collapse
Thank you I will try this week end !
Bye bye TIM and bye bye bugs
Dany_81 said:
I flashed everything from the archive with fastboot, but the dual SIM settings menu doesn't appear.
By the way, the phone model is Z016S, while the "normal" one is Z016D. Perhaps the "S" stands for "single" and the "D" for "double"?
Click to expand...
Click to collapse
Yes in Z016S, "S" is for Single :
Maybe it's not in the hardware and we can activate dual sim in the boot after unlock, like frequency band ?
Kitnoos gli aggiornamenti funzionano in automatico?
Update work?
I need help about converting my ZE551ML firmware WW to CN. I moved to China and made a factory reset. It didn't work because it tried to connect to Google play right after completed the factory reset. I need to download CN version firmware and change it from WW to CN. My current version WW_Z00A 6.0.1 4.21.40.134 please help me.
Hi All,
I've just returned from China with an A70 (A7050), it's got the stock Chinese firmware on it. I wanted to flash it to Hong Kong firmware to get gapps,etc. My knowledge of doing this is the sum total of nothing and I'm having problems after trying to follow a few guides I found online;
I've downloaded the firmware and Odins
I've populated BL, AP, CP & CSC (used the Home_CSC not the CSC) in Odins
Hit start and got a fail due to OEM lock
Found a guide on how to remove the OEM lock, bootloader now unlocked
Repeated the first steps above
Now get a fail "SECURE CHECK FAIL : abl"
I'm struggling to find information on how to proceed from here or am I just being a total potato and missing something easy?
Any help is appreciated
Have you been able to fix this?
I'm interested how this turned this out for you.
Hi, I forgot to update here but yes I was successful. For reasons I don't understand it wouldn't take the latest HK firmware (the Chinese was the latest at the time). When I tried the earliest HK firmware available it went straight on (and later updated itself).
Did u unlock the bootloader or did u just switch on OEM unlocking?