Hello , i am new here .
I bought rooted red magic 5g
and i unrooted it
but i need the stock recovery
I searched everywhere on internet can't find it , hope i can find it here , thanks
Attached device info
YOU can take it from official rom update zip file and flash it from it i tried it with my phone RED magic 5s and it worked for me if you want me to downlead the update file if you have a cap in your internet i can and upload it in here tell me what region you are in
I am in saudi arebia and my phone is 5g not 5s , do you think it will not damage my phone ?
And can i add official rom on custom recovery ? Thank you
Sqeel said:
I am in saudi arebia and my phone is 5g not 5s , do you think it will not damage my phone ?
And can i add official rom on custom recovery ? Thank you
Click to expand...
Click to collapse
same as me i'm from Saudi Arabia just download official rom
http://rom.download.nubia.com/Europe/NX659J/V411/NX659J-update.zip
as your phone region and version EU just download and in it has official recovery.img in it extract it to minimal ADB and Fastboot folder and go to bootloader by :
adb reboot bootloader
flash it with :
fastboot flash recovery recovery.img
no you can't flash it custom recovery in my test in my phone it just boot you into recovery and dosen't boot
and your OS update is old try update after restore recovery
good day. i am a newbie. my phone is Red magic 5g bootloader is unlocked and want to go back to stock ROM because i want my phone updated using the "setting" system update". because of bootloader unlock I can't update my phone. maybe someone there can help me with the step by step tutorial on how to get back from stock ROM. attached file is my about phone. thank you so much.
Related
Guide to unlock Huawei Ascend Mate bootloader
I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. DO IT AT YOUR OWN RISK.EVERYTHING WRITTEN IN THIS DOCUMENT WAS TESTED ON MY PHONE.
After playing with my Mate I found a way to unlock the locked bootloader. If your bootloader is unlocked you can flash custom kernel , recovery to your phone.
The files used to unlock the bootloader is from P6 KitKat firmware. These two files are for efi and fastboot partition. Flashing only these partitions can avoid problems with mismatching modem firmware. The process was tested on official B221 firmware , but should work with any firmware. Reflashing a stock firmware(as I know there are only firmwares for Mate only with locked bootloader) with dload will relock the bootloader.
Unlocking process need proper adb and fastboot drivers installed. I use this driver :Huawei handset drivers for windows
Guide in pdf format
If your adb and fastboot drivers are correct you can start unlocking the bootloader.
If you want to unlock the bootloader and install Twrp recovery use this package :Bootloader unlock with TWRP install
Bootloader unlock with TWRP install mirror
This way powering on your phone with volume up button hold TWRP recovery comes up instead of stock 3e recovery. If you want to use the dload method to install a stock rom you have to restore the stock recovery.
Stock B221 fastboot flashable recovery
Stock B221 fastboot flashable recovery mirror
The other package just unlocks the bootloader .Bootloader unlock.
Bootloader unlock mirror.
Turn on USB debugging on your phone (settings->developer settings)
Start the package.
File extraction starts.
Command prompt window should appear.
Your phone restarts in bootloader mode.
Efi partition is flashed.
Fastboot partition is flashed.
Your phone restarts in bootloader mode.
Your bootloader state is displayed. (should say bootloader unlocked)
Your phone restart in normal mode.
This is what the packages do :
.\adb wait-for-device
.\adb reboot bootloader
.\fastboot flash efi efi.img
.\fastboot flash fastboot fastboot.img
.\fastboot reboot-bootloader
timeout 2
.\fastboot oem get-bootinfo
timeout 10
If it says your bootloader is still locked you can try the following:
adb reboot bootloader
fastboot oem unlock UUUUUUUUUUUUUUUU
If you want to restore stock rom and recovery here are the packages.
Recovery restore package for B221
Recovery restore package for B907
These packages restores the original efi and fastboot partition and then restores the stock recovery. These packages do the opposite as the unlock bootloader , however my phone stayed unlocked. Also this package solves the problem when the stock recovery stuck at the begining when trying to flash a stock rom using dload method.
WARNING:If you plan to flash a rom not made for Mate , always check that it does not overwrite other partitions then boot, system, data, cust. If the install package reflash the modem do not install it as it can hard brick your device.
For updated versions of permanent TWRP recovery check my thread here
Thanks to surdu_petru for the initial device tree to compile twrp.
joe.stone said:
Guide to unlock Huawei Ascend Mate bootloader
I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. DO IT AT YOUR OWN RISK.EVERYTHING WRITTEN IN THIS DOCUMENT WAS TESTED ON MY PHONE.
After playing with my Mate I found a way to unlock the locked bootloader. If your bootloader is unlocked you can flash custom kernel , recovery to your phone.
The files used to unlock the bootloader is from P6 KitKat firmware. These two files are for efi and fastboot partition. Flashing only these partitions can avoid problems with mismatching modem firmware. The process was tested on official B221 firmware , but should work with any firmware. Reflashing a stock firmware(as I know there are only firmwares for Mate only with locked bootloader) with dload will relock the bootloader.
Unlocking process need proper adb and fastboot drivers installed. I use this driver :Huawei handset drivers for windows
Guide in pdf format
If your adb and fastboot drivers are correct you can start unlocking the bootloader.
If you want to unlock the bootloader and install Twrp recovery use this package :Bootloader unlock with TWRP install
This way powering on your phone with volume up button hold TWRP recovery comes up instead of stock 3e recovery. If you want to use the dload method to install a stock rom you have to restore the stock recovery.
Stock B221 fastboot flashable recovery
The other package just unlocks the bootloader .Bootloader unlock.
Turn on USB debugging on your phone (settings->developer settings)
Start the package.
File extraction starts.
Command prompt window should appear.
Your phone restarts in bootloader mode.
Efi partition is flashed.
Fastboot partition is flashed.
Your phone restarts in bootloader mode.
Your bootloader state is displayed. (should say bootloader unlocked)
Your phone restart in normal mode.
This is what the packages do :
.\adb wait-for-device
.\adb reboot bootloader
.\fastboot flash efi efi.img
.\fastboot flash fastboot fastboot.img
.\fastboot reboot-bootloader
timeout 2
.\fastboot oem get-bootinfo
timeout 10
Thanks to surdu_petru for the initial device tree to compile twrp.
Click to expand...
Click to collapse
Thanks joe....atlast bootloader unlocked..
One more thing i installed Fly UI OS from p6 and replaced with stock HAM boot.img....OS is not booting properly getting lots of FC's...
Does CM10.1 require different kernel or do we need to change any setting?
svvv said:
Thanks joe....atlast bootloader unlocked..
One more thing i installed Fly UI OS from p6 and replaced with stock HAM boot.img....OS is not booting properly getting lots of FC's...
Does CM10.1 require different kernel or do we need to change any setting?
Click to expand...
Click to collapse
CM 10.1 may need some change in kernel or/and its config. Init.rc files needs modifications (framework , init.d support) , and it can happen that the init binary need some mods in cm source for proper working.For example wifi firmware path as on g510 . The standard cm init uses 2 firmware path , while the g510 init uses 4 to properly load wifi firmware files.You can check it on my github.
I am planning to compile a cm rom for our device , but the bootloader was the first step.
Awesome news mate ...
Finally someone can make goodies on HAM !
You can take a look also on my CM11 development project for P6, maybe you will make one for HAM !
Good luck !
Nice , very nice
Yes !!! This is best news on Ham. Thanks
Inviato dal mio HUAWEI MT1-U06 utilizzando Tapatalk
Thanks! ...While this method works to unlock bootloader in B907 HAM??? I think I'll try
Unlocked on B907 it was only a problem , the bat don't find the extracted folder on %temp% but it was there .....I was running adb cmd inside temp folder. Work perfect . THANKS
IT'S DAY ZERO FOR OWR DEVICE
Inviato dal mio HUAWEI MT1-U06 utilizzando Tapatalk
unlocked bootloader will be easier to carry kitkat HAM??
ErSergi said:
unlocked bootloader will be easier to carry kitkat HAM??
Click to expand...
Click to collapse
Yes, KitKat will be more easily to port on HAM !
surdu_petru said:
Yes, KitKat will be more easily to port on HAM !
Click to expand...
Click to collapse
but we need kernel from huawei right....for kitkat
Tested and works in B907 Oficial, unlocked bootloader ... Thank you for the contribution
Now this is a great Birthday present for me..
HAM Finally can be UNLOCKED.
i havent try yet but just wanna ask few questions.
1. Since now i'm using Hyd52Rom from Husen, can HAM be Unlocked with this Rom running?
2. Whats the best choice of current rom running for Unlocking?
maybe its sound stupid but its me (non-devs brain and only a user who dare to test..)...
Thanks guys.
You can unlock your phone using any rom. The only thing is needed turned on usb debugging. Of course the drivers on your pc should be installed .
After unlock check my other thread and update your permanent twrp to 2.6.3.2.
Sent from my HUAWEI MT1-U06 using xda app-developers app
HAM finally unlocked.
Looking forward for testing Compatible Roms.
Any suggestions highly appreciatable.
Thinking of trying P6 roms but not sure if theyre compatible
[email protected]
theoppositeman said:
HAM finally unlocked.
Looking forward for testing Compatible Roms.
Any suggestions highly appreciatable.
Thinking of trying P6 roms but not sure if theyre compatible
[email protected]
Click to expand...
Click to collapse
I think every p6 JB ROM will compitable just you have to change dpi in build.prop
Sent from my P6-U06 using xda app-developers app
Hi @ all,
it's all progressing really well in recent times
Can i use this method only for HAM or can i use this for my P6 also?
87insane said:
Hi @ all,
it's all progressing really well in recent times
Can i use this method only for HAM or can i use this for my P6 also?
Click to expand...
Click to collapse
It should work on P6 too , but for P6 there are stock roms with unlocked bootloader.(KK beta).
If you want to use it on your P6 , use unlock bootloader only , and flash permanent twrp made for P6.
Of course permanent twrp for Mate will work on P6 as well , but the device identifier will be hwmt1_u06 and not hwp6_u06 which can cause assert errors when you try to flash a recovery flashable P6 rom .
I know. But i search for a way to use this on B125 international. In the CN it is to easy
Gesendet von meinem HUAWEI P6-U06
Hi,
I can't flash [ROM][JB4.2.2][HAM][ HYD52ROM V5] [Superfast,Stable][V5 7-02-14]
from TWRP 2.6.3.2 . Everythings go right but on reboot the device never end logo.
I need to relock bottloader and start again whit dload. I have tryed flashing same zip from tmp recovery on locked and everything is working. i will to know if is a rom problem or twrp or unlocked bootloader.Also i have try buckup from HYD52ROM V5 whit twpr 2.6.3.2 and restore rom, after a factory reset, but was a id mismatching and no user app.
I will try to unlock and no permanent twpr, but use a cwm tmp whats happen. i will report
Edit: whit unlocked bootloader and tmp twrp
2.6.3.0 from sordu_petru recovery flash of same zip ad no problem.
hi every one
last night when i wanted to sleep.my phone suddenly restart .when the os wants to load.it reamins at huawei logo
i think i have this os :SelfieP6 by Reyncla
so i decided to install another rom
i found this one interest :
[ROM][4.4.4][ Unofficially Omni ROM
in order to install this rom.it said :ive to first install kk beta .to install kk beta i have to go back to stock recovery.i had twrp.so ive installed these 2 by twrp : Stock Firmware Huawei B506 CN KitKat boot and recovery.zip
first i install boot then recovery.
and now what ever i do .it reamains in huawei logo.my twrp gone,my os gone
i cant do anything with adb commands cuz it says :device not found
am i bricked my phone >?
v.mohamadtaghi said:
hi every one
last night when i wanted to sleep.my phone suddenly restart .when the os wants to load.it reamins at huawei logo
i think i have this os :SelfieP6 by Reyncla
so i decided to install another rom
i found this one interest :
[ROM][4.4.4][ Unofficially Omni ROM
in order to install this rom.it said :ive to first install kk beta .to install kk beta i have to go back to stock recovery.i had twrp.so ive installed these 2 by twrp : Stock Firmware Huawei B506 CN KitKat boot and recovery.zip
first i install boot then recovery.
and now what ever i do .it reamains in huawei logo.my twrp gone,my os gone
i cant do anything with adb commands cuz it says :device not found
am i bricked my phone >?
Click to expand...
Click to collapse
Boot into bootloader and reflash twrp.
1) I dont remember the key combination required to get into fastboot, could anyone help out on this one
2) When in fastboot your phone should get stuck on the huawei screen, then you run fastboot flash recovery recovery_twrp.img
recovery_twrp.img being the twrp file from surdus thread.
3) fastboot restart and you should be able to access twrp
TNX
tauio111 said:
Boot into bootloader and reflash twrp.
1) I dont remember the key combination required to get into fastboot, could anyone help out on this one
2) When in fastboot your phone should get stuck on the huawei screen, then you run fastboot flash recovery recovery_twrp.img
recovery_twrp.img being the twrp file from surdus thread.
3) fastboot restart and you should be able to access twrp
Click to expand...
Click to collapse
hi buddy tanx for your help.thats quite helpful.when i have twrp ,i want to use dlod methode.but i cant .can u help me what to do >?
v.mohamadtaghi said:
hi buddy tanx for your help.thats quite helpful.when i have twrp ,i want to use dlod methode.but i cant .can u help me what to do >?
Click to expand...
Click to collapse
dload method can be used only with stock recovery.
TWRP is for flashing custom ROM's.
install
XDAvatar said:
dload method can be used only with stock recovery.
TWRP is for flashing custom ROM's.
Click to expand...
Click to collapse
how can i install stock recovery ? .in surdu's post .there are 2 types of stock recovery.which one of them should i install?
v.mohamadtaghi said:
how can i install stock recovery ? .in surdu's post .there are 2 types of stock recovery.which one of them should i install?
Click to expand...
Click to collapse
Try both. See which one is working.
My phone was routed and i tried to install the last update from huawei then it stuck in the recovery mod sp i had to install an unofficial cm13 and now i want to return to huawei official system rui 4.01 what should i do ?
Return to official
Simpro said:
My phone was routed and i tried to install the last update from huawei then it stuck in the recovery mod sp i had to install an unofficial cm13 and now i want to return to huawei official system rui 4.01 what should i do ?
Click to expand...
Click to collapse
If you already downloaded official firmware for your model, put it on root folder on your sdcard or internal memory, in folder named "dload" (without quotes). It should contain two files: recovery.img and UPDATE.APP. Then turn off your phone, and turn it on with holding Power+Volume Up+Volume Down. Wait for install to finish, it will reboot itself when done. You will lose all your data on internal storage and root, so you will need to install TWRP and SuperSU again if needed.
What if it stuck again in twrp like the first time ?
Simpro said:
What if it stuck again in twrp like the first time ?
Click to expand...
Click to collapse
Recovery.img in dload folder will replace TWRP with default Huawei recovery. Also, i was stucked in earlier TWRP recovery, with version 3.0.2-0 it was ok.
If you don`t have need for root, rom will work with default recovery.
Ok thank you i will try it
Where i can find a stock firmware for gx8 (i'am from morocco)
Simpro said:
Where i can find a stock firmware for gx8 (i'am from morocco)
Click to expand...
Click to collapse
Hm, not sure, regional Huawei website for Morocco doesn't list GX8, you could try with rom from this forum: https://forum.xda-developers.com/gx8/how-to/g8-g7-plus-official-roms-europe-t3294362 .
it will be in middle east like my device
http://consumer.huawei.com/kw-en/support/products/downloads/detail/huawei-g8-kwen.htm?id=84325
Hi there, i need android 10 stock recovery . img file , cant find it anywhere on internet, please post link if someone has extracted from rom? the reason for asking is that i just got my 2nd android 10 Indonesian rom update but i cant update it manually via LR twrp , the update script fails, so i think i can update it via stock recovery.. thanks
you can update it via update center. Go to check for updates in setting and tap to the MIUI logo 3 times. After that click 3 dots on right top select custom update package.
Nihat2003lol said:
you can update it via update center. Go to check for updates in setting and tap to the MIUI logo 3 times. After that click 3 dots on right top select custom update package.
Click to expand...
Click to collapse
thats what i explained, i have LR twrp installed, and its not allowing me to install the update, the update script fails in twrp,, so i need stock recovery for that
n70shan said:
thats what i explained, i have LR twrp installed, and its not allowing me to install the update, the update script fails in twrp,, so i need stock recovery for that
Click to expand...
Click to collapse
Oh sorry for misunderstanding. Download fastboot rom, extract it, and flash recovery.img via platform-tools(command to flash "fastboot flash recovery recovery.img"). I dont know if it will brick ur device or not. Best thing I can say try to flash fastboot rom with Mi Flash Tool(make sure select the clean all option(not the clean all and lock)).
Nihat2003lol said:
Oh sorry for misunderstanding. Download fastboot rom, extract it, and flash recovery.img via platform-tools(command to flash "fastboot flash recovery recovery.img"). I dont know if it will brick ur device or not. Best thing I can say try to flash fastboot rom with Mi Flash Tool(make sure select the clean all option(not the clean all and lock)).
Click to expand...
Click to collapse
cant find any fastboot rom for android 10 indonessian
n70shan said:
cant find any fastboot rom for android 10 indonessian
Click to expand...
Click to collapse
https://flashxiaomi.com/download-install-miui-rom-for-xiaomi-redmi-note-8-pro-all-miui-firmwares/
Download Indonesian 11.0.2 Android 10.
Nihat2003lol said:
https://flashxiaomi.com/download-install-miui-rom-for-xiaomi-redmi-note-8-pro-all-miui-firmwares/
Download Indonesian 11.0.2 Android 10.
Click to expand...
Click to collapse
only android 9 fastboot available , android 10 fastboot download links are broken
n70shan said:
Hi there, i need android 10 stock recovery . img file , cant find it anywhere on internet, please post link if someone has extracted from rom? the reason for asking is that i just got my 2nd android 10 Indonesian rom update but i cant update it manually via LR twrp , the update script fails, so i think i can update it via stock recovery.. thanks
Click to expand...
Click to collapse
You can install orange fox recovery because it support ota update and then you never need to worry about ota updates.:laugh:
n70shan said:
Hi there, i need android 10 stock recovery . img file , cant find it anywhere on internet, please post link if someone has extracted from rom? the reason for asking is that i just got my 2nd android 10 Indonesian rom update but i cant update it manually via LR twrp , the update script fails, so i think i can update it via stock recovery.. thanks
Click to expand...
Click to collapse
Download & flash this within LR.TWRP bro: https://bigota.d.miui.com/V11.0.2.0...DGlobal_V11.0.2.0.QGGIDXM_b57de5267e_10.0.zip
https://forum.xda-developers.com/re...tock-recovery-redmi-note-8-pro-t4089033#login
Also check the comments section you will found both Android 9 & 10 stock Recovery of REDMI NOTE 8 PRO Device Indian Varient device .
Rakesh Mahto said:
https://forum.xda-developers.com/re...tock-recovery-redmi-note-8-pro-t4089033#login
Also check the comments section you will found both Android 9 & 10 stock Recovery of REDMI NOTE 8 PRO Device Indian Varient device .
Click to expand...
Click to collapse
is that possible to use stock recovery from indian device for Indonesian device?
.
Hi everyone how are you guys,I know my question is not related to the topic but I want someone to help me.i recently bought the red magic 5g Chinese specs,but the problem is that from where I purchased they installed the global Rom inside of it,I want the cn Rom I downloaded the software from the cn nubia official website but when I am about to install it shows me the error,I don't know what to do now,please someone help me
Salim0900 said:
Hi everyone how are you guys,I know my question is not related to the topic but I want someone to help me.i recently bought the red magic 5g Chinese specs,but the problem is that from where I purchased they installed the global Rom inside of it,I want the cn Rom I downloaded the software from the cn nubia official website but when I am about to install it shows me the error,I don't know what to do now,please someone help me
Click to expand...
Click to collapse
Shows you which error?
Did you try to install it via local update?
Anyway, your best bet is to install TWRP and flash the CN ROM through TWRP.
Alternatively, use miflash tool in the unofficial unbrick tool to flash the CN firmware via edl mode
Nubia package error
Bro when I purchased the phone the software was 3.16 global,then I changed it to 4.16 with local update,but I was trying the same thing with the Chinese software when I go to the local update and I press the install button the mobile shut down and goes to the software installation but after 10% or something it shows package error and just reboot it self.i don't know what to do now. sorry my English is not good
Salim0900 said:
Bro when I purchased the phone the software was 3.16 global,then I changed it to 4.16 with local update,but I was trying the same thing with the Chinese software when I go to the local update and I press the install button the mobile shut down and goes to the software installation but after 10% or something it shows package error and just reboot it self.i don't know what to do now. sorry my English is not good
Click to expand...
Click to collapse
Use TWRP; follow the link below, root your device then flash CN ROM from TWRP.
Back up your data cos flashing TWRP will wipe everything.
Also, when installing CN, get version 6.23
All the best
zayidhs said:
Use TWRP; follow the link below, root your device then flash CN ROM from TWRP.
Back up your data cos flashing TWRP will wipe everything.
Also, when installing CN, get version 6.23
All the best
Click to expand...
Click to collapse
Sorry brother but I can't see any link
Salim0900 said:
Sorry brother but I can't see any link
Click to expand...
Click to collapse
http://romdownload.nubia.com/红魔5G/V6.23/NX659J-update.zip
There you are. Its the 6.23 version of the cn rom
This directs to the 5s version but both the 5s and 5g versions of this rom are identical. ( Md5 checksum proves its the same file)
Flash from recovery. Or through TWRP
Brother I downloaded the file but I am trying to flash it through recovery mode,but when I go to the recovery mode and press on package update, otg device but there is no file there.the file location is in the storage device
Salim0900 said:
Brother I downloaded the file but I am trying to flash it through recovery mode,but when I go to the recovery mode and press on package update, otg device but there is no file there.the file location is in the storage device
Click to expand...
Click to collapse
Otg refers to a external usb device you connect to the phone. If you have the update.zip on the root of the internal memory it should show up.
If it does not. You should use the root without unlocking bootloader tutorial to install TWRP. The zip will flash from there with no problems.