Related
| Need to revive my HARD-BRICKED Redmi 1s | First of all, let me clarify myself :
1. If I say SOFT-BRICKED, then that means the device is either stuck on boot screen or boot-loops., for which I don't need any assist, because one can still access the recovery mode (volume up + power button combination) or the fastboot mode (volume down + power button combination) and then you can flash proper stock ROM either {directly from recovery mode} or {through fastboot mode with the help of a PC and MiFlash Tool}. If that be the case then you can find proper ROM for your device on Mi official website with procedure on their forums and threads.
2. My problem is with HARD-BRICKED device, i.e. my Redmi 1s won't power on. And don't tell me to give the above mentioned solution for "SOFT-BRICKED" because I can't access neither the recovery mode nor the fastboot mode. If it did I would have already fixed it myself and 've no need to post this thread! Also the notification light on my Redmi 1s has gone dead, i.e. while charging it doesn't blinks anymore, nor does my PC recognizes it. Actually it is a problem of flashing wrong or improper ROM on the device.
Need Help ASAP
How to revive SOFT-BRICKED Redmi 1s
To revive your SOFT-BRICKED Redmi 1s, (i.e. the screen is stuck on boot screen) follow the procedure :
1. Download the Mi Flash Tool on your PC.
2. Download the latest Gloabal version of Redmi 1s Fastboot ROM on your PC.
3. Extract the ROM zipped file which you downloaded.
4. Open Mi Flash Tool. Browse and select the "images" folder inside the folder which you extracted.
5. Click on "Browse" to access drop-down menu and select "Advanced". In the new dialog box, make sure that FlashBoot Script is set default to "flash_all_except_storage.bat".
6. Now press the volume down + power button on your Redmi 1s till you see the Mi Fastboot Logo.
7. Now connect your Redmi 1s to your PC; and in Mi Flash Tool click refresh to view your device in the list below. Once displayed, select it and hit the "Flash" button.
8. Download the Gloabal version of Redmi 1s Recovery ROM on your PC. Note that this is Recovery ROM and the previous one was Fastboot ROM. They Both are not the same.
9. Once you've downloaded the Recovery ROM, rename the zipped file to "update.zip" and keep it permanently in the root-folder of your internal memory of Redmi 1s. This will help you to flash Stock ROM just by going into Recovery Mode (volume up + power button combination) and selecting install update.zip. Next time if the same problem occurs, you won't have to use the above procedure again. Just re-Flash the ROM from Recovery Mode.
Hope I could've helped.
Bu1ba$aur said:
To revive your SOFT-BRICKED Redmi 1s, (i.e. the screen is stuck on boot screen) follow the procedure :
Hope I could've helped.
Click to expand...
Click to collapse
You didn't understand that it can't acces the fastboot?
Because is not my work I give you the link:
HERE
Hope that you can solve your problem.
Solution?
Hi,
did you finally got a solution to your HARD bricked problem?
i have same issue (completely dead)
i do have the same problem please inform me if any gets solution for this
my redmi 1s is dead. i insert usb cable in phone then charging led blinking but not detected in windows. what can i do? plz help.............
same problem here, it detects COM10 port on windows7 pc
same problem here, it detects COM10 port on windows7 pc when connected, qualcomm device, any chance to get back from here, Authorised service center would be able to help me???
---------- Post added at 02:56 PM ---------- Previous post was at 01:59 PM ----------
Bu1ba$aur said:
| Need to revive my HARD-BRICKED Redmi 1s | First of all, let me clarify myself :
1. If I say SOFT-BRICKED, then that means the device is either stuck on boot screen or boot-loops., for which I don't need any assist, because one can still access the recovery mode (volume up + power button combination) or the fastboot mode (volume down + power button combination) and then you can flash proper stock ROM either {directly from recovery mode} or {through fastboot mode with the help of a PC and MiFlash Tool}. If that be the case then you can find proper ROM for your device on Mi official website with procedure on their forums and threads.
2. My problem is with HARD-BRICKED device, i.e. my Redmi 1s won't power on. And don't tell me to give the above mentioned solution for "SOFT-BRICKED" because I can't access neither the recovery mode nor the fastboot mode. If it did I would have already fixed it myself and 've no need to post this thread! Also the notification light on my Redmi 1s has gone dead, i.e. while charging it doesn't blinks anymore, nor does my PC recognizes it. Actually it is a problem of flashing wrong or improper ROM on the device.
Need Help ASAP
Click to expand...
Click to collapse
I found this on miui.com
thread-54139-1-1.html
try this and update ASAP here
Same but Different
@Bu1ba$aur I think i have the HardBricked symptoms but in my case when i do flash my MT6592 device it works... i mean, the program (SP Flash Tool) says it's complete, no problems, no errors, full progress bar but, at the end my phone doesn't nothing, no boot, no logo, no charging, and i've been tryng with its stock rom
Hello..I have a similar situation here. I Couldn't locate the solution here if there is any..can someone please point to the right direction.
My Situation:- My Redmi 1s does not recognize by the PC nor in Linux using lsusb command. I had also tried the "Touch point" Method as advised in the official Miui Forum. In Nutshell, My device is hard bricked and there is noway to revive it per my knowledge. So, If anyone can help me out here would be great..and I would appreciate it greatly.
Thanks.
i think this could help you all. follow the instructions carefully
http://forum.xda-developers.com/and.../guide-how-to-reboot-to-edl-fastboot-t3394292
Hi
Redmi 1S
same problem.
The above link tried not working cause unable to go to fastboot mode.
Help please
Thanks in advance
my 1s got stuck at mi logo screen, but i flashed successfully via fastboot mode. Still it doesnt workout,pls help asap!
Bu1ba$aur said:
| Need to revive my HARD-BRICKED Redmi 1s | First of all, let me clarify myself :
1. If I say SOFT-BRICKED, then that means the device is either stuck on boot screen or boot-loops., for which I don't need any assist, because one can still access the recovery mode (volume up + power button combination) or the fastboot mode (volume down + power button combination) and then you can flash proper stock ROM either {directly from recovery mode} or {through fastboot mode with the help of a PC and MiFlash Tool}. If that be the case then you can find proper ROM for your device on Mi official website with procedure on their forums and threads.
2. My problem is with HARD-BRICKED device, i.e. my Redmi 1s won't power on. And don't tell me to give the above mentioned solution for "SOFT-BRICKED" because I can't access neither the recovery mode nor the fastboot mode. If it did I would have already fixed it myself and 've no need to post this thread! Also the notification light on my Redmi 1s has gone dead, i.e. while charging it doesn't blinks anymore, nor does my PC recognizes it. Actually it is a problem of flashing wrong or improper ROM on the device.
Need Help ASAP
Click to expand...
Click to collapse
Just see this tutorial it will definitely help you : http://en.miui.com/forum.php?mod=viewthread&tid=54139&extra=&highlight=redmi+1S+no+fastboot&page=1
---------- Post added at 10:30 AM ---------- Previous post was at 10:29 AM ----------
amas said:
Hi
Redmi 1S
same problem.
The above link tried not working cause unable to go to fastboot mode.
Help please
Thanks in advance
Click to expand...
Click to collapse
This will help you : http://en.miui.com/forum.php?mod=viewthread&tid=54139&extra=&highlight=redmi+1S+no+fastboot&page=1
:good::good::good::good:
adharshvr said:
Just see this tutorial it will definitely help you : http://en.miui.com/forum.php?mod=viewthread&tid=54139&extra=&highlight=redmi+1S+no+fastboot&page=1
---------- Post added at 10:30 AM ---------- Previous post was at 10:29 AM ----------
This will help you : http://en.miui.com/forum.php?mod=viewthread&tid=54139&extra=&highlight=redmi+1S+no+fastboot&page=1
:good::good::good::good:
Click to expand...
Click to collapse
Can anyone proof if this works?
Or will this work on xiaomi note pro ?
I have problem is 2013029 redmi 1s flash after dead only show red light... Qualcomm port 9008 port not show only show 9006 port than not a flash any tool. please any solution is hardware issue ya software issue guide me
my redmi 1s is stuck in bootloop
I cant access recovery mode or Fastboot mode
Device restarts by itself once i plug in battery.
Help please
Hello Guys,
I need the RAW files to download please could anyone please indicate a link or upload the ROM please? I've been on my phone for more than 3 weeks and can not find anywhere.
Thank you very much for the attention of all. A big hug!
http://dlcdnet.asus.com/pub/ASUS/Ze...59.353408663.1494812275-1536164900.1482540343
BahaStriker said:
http://dlcdnet.asus.com/pub/ASUS/Ze...59.353408663.1494812275-1536164900.1482540343
Click to expand...
Click to collapse
Hello Baha Striker!
How did you get the flash in this ROM? What tool did you use? I'm trying to use QFIL because it was the only one that recognized my device. But I'm having trouble locating .XML to do the flash and finally fix my device.
My device does not turn on, it only recognizes in windows task manager like qualcomm hs-usb qdloader 9008. Thanks a lot for the help.
landognr said:
Hello Baha Striker!
How did you get the flash in this ROM? What tool did you use? I'm trying to use QFIL because it was the only one that recognized my device. But I'm having trouble locating .XML to do the flash and finally fix my device.
My device does not turn on, it only recognizes in windows task manager like qualcomm hs-usb qdloader 9008. Thanks a lot for the help.
Click to expand...
Click to collapse
Hey mate, I had the same issue before I know it seems that it's the only way that your phone get recognized with but in matter of fact if you keep trying to boot on fastboot it'll boot there eventually.. so keep trying the keys combination till it works and a reminder fastboot on this device is when it stays on Asus logo screen so when you get there just flash recovery and install your ROM like normal
BahaStriker said:
Hey mate, I had the same issue before I know it seems that it's the only way that your phone get recognized with but in matter of fact if you keep trying to boot on fastboot it'll boot there eventually.. so keep trying the keys combination till it works and a reminder fastboot on this device is when it stays on Asus logo screen so when you get there just flash recovery and install your ROM like normal
Click to expand...
Click to collapse
Ok friend, let me see if I get it. Do I keep trying until my phone goes into fastboot? Does he eventually enter? So all I have to do is press the power button + vol up and keep trying until an ASUS logo appears? Thank you so much for helping, my friend, God bless you!
BahaStriker said:
Hey mate, I had the same issue before I know it seems that it's the only way that your phone get recognized with but in matter of fact if you keep trying to boot on fastboot it'll boot there eventually.. so keep trying the keys combination till it works and a reminder fastboot on this device is when it stays on Asus logo screen so when you get there just flash recovery and install your ROM like normal
Click to expand...
Click to collapse
Hello Baha,
I tried today all day to make this device go into fastboot mode but I did not succeed. I try the combinations Power + vol up, Power + vol down, only power and all the buttons.
Could you kindly explain me better how you got into your device's fastboot mode? Was it connected to the charger or pc or was it disconnected?
Thank you
Fastboot mode :
1) Turn off the ASUS ZENFONE 3 DELUXE ZS570KL
2) Press and hold Volume Up button (do not release and continue to No.3)
3) Press and hold Power button (No.2 still continue press and hold), so now we hold Volume Up Button + Power Button together
4) Wait until vibrate appear at ASUS ZENFONE 3 DELUXE ZS570KL, then release Power button (do not release Volume Up button)
5) If we see Logo appear at LCD screen, then release Volume Up button (release all button now)
Alguma solução para nosso zenfone 3 deluxe ?
arquivos Qfil para zenfone 3 deluxe ?
Ok guys,just I need help ,I can get to the fasboot ,my pc recognize my Asus zenphone deluxe3 (2,15) I have ADB and fasboot instaled Just I tried many times flash twrp and no luck....my bootloader is locked and my Asus in in bootloop ...ale what I can do ,is just to boot in fasboot....so how can I instal twrp? Is there any chance?
quotation
WW-15.0210.1810.73 stock recovery & RAW
Database--https://drive.google.com/drive/folders/0By3NdBos6w6JZEloNDFMaDVxS0U
willinko23 said:
Ok guys,just I need help ,I can get to the fasboot ,my pc recognize my Asus zenphone deluxe3 (2,15) I have ADB and fasboot instaled Just I tried many times flash twrp and no luck....my bootloader is locked and my Asus in in bootloop ...ale what I can do ,is just to boot in fasboot....so how can I instal twrp? Is there any chance?
Click to expand...
Click to collapse
Same promlem, I hope somebody can help us out
If anyone got success in recovering their z2 plus from 900e mode or unable to boot please tell us here how to do so. Thanks.
It happened to me . I cut down my z2plus plus cable to make deep flash cable and https://youtu.be/A9D-kqIziaA
Yes I got success
To enter in the edl mode or get 9008
Just follow the step
Completely switch off your phone
Now hold volume up button for 15 sec
After 15 sec press the power button for .5sec
Now again press and hold the power button insert the cable after you enter to edl mod realese both power and volume button
If any problem occur try it again and again
Done...
Okay so this helped me in booting to EDL mode, but still i'm unable to flash using QFIL or MiFlash. What should I do now?
Ensure the following steps
1 You have a valid qpst flashable file.
2. The file was extracted in c drive within a folder having simple name.
3. Start qfil app after going to the EDL mode perform the operation as fast as you can.
if problem persists .
TRY AGAIN AND AGAIN FROM THE VERY BEGINNING
okay Will try.
Update:
Workedd....!!! Thanks a Tonn......
Hi,
I was trying to flash Lineage OS on my Whyred, and installed non-ARB ROM over MiUi 10 and my device is now bricked.
I can see my phone in EDL mode, as I can see "Qualcomm HS-USB QDLoader 9008" in the device manager.
I have also installed all the drivers from MiForum thread-784616-1-0. (I don't have right to post complete link)
Even after restart and power cycling the phone, my device does not show in MiFlash tool, and I get "Length cannot be less than zero. Parameter name: length" error. I have tried three different versions on MiFlash tool.
I am on Win10 64 bit
I have unlocked bootloader with TWRP installed before the brick happen.
EDIT:
I tried QFIL methods but it was unsuccessful.
Qfil tool detects the phone without issue, but flashing fails with the following error:
Code:
ERROR: Only nop and sig tag can be received before authentication.
1. none of the custom rom has ARB switched on! how did you brick your phone by flashing Linage??? I cannot understand
2. you cannot JUST go in to EDL mode with RN5pro since Xiaomi has removed the pressing volumes and power button 30 seconds to get in to edl mode! you have remove BACK PANEL of rn5p and short the testpoints with metal & plug the usb in with pc in order to ender edl mode!
3. even if you enter in edl more! miflash will ONLY flash if your MI account has been authorised from china!
now what exactly is your device state? can you reboot enter in fastboot mode?
fastboot roms cannot be placed in LONGGGG paramiters! put it in C drive and rename folders to smaller.. like C:\1 and put all the unzipped Tz files here to flash!
if you cannot flash by mi then you should consider Qualcom Qfil flasher! , RN5p is snapdragon device and can be flashed with QFIL!
YasuHamed said:
1. none of the custom rom has ARB switched on! how did you brick your phone by flashing Linage??? I cannot understand
2. you cannot JUST go in to EDL mode with RN5pro since Xiaomi has removed the pressing volumes and power button 30 seconds to get in to edl mode! you have remove BACK PANEL of rn5p and short the testpoints with metal & plug the usb in with pc in order to ender edl mode!
3. even if you enter in edl more! miflash will ONLY flash if your MI account has been authorised from china!
now what exactly is your device state? can you reboot enter in fastboot mode?
fastboot roms cannot be placed in LONGGGG paramiters! put it in C drive and rename folders to smaller.. like C:\1 and put all the unzipped Tz files here to flash!
if you cannot flash by mi then you should consider Qualcom Qfil flasher! , RN5p is snapdragon device and can be flashed with QFIL!
Click to expand...
Click to collapse
I don't know how it got bricked AFTER installing Lineage OS.
Current situatiuon
1) Mi Flash tool does not list/detect my phone even though I am in EDL mode.
2) Qfil tool detects the phone without issue, but flashing fails with following error:
Code:
ERROR: Only nop and sig tag can be recevied before authentication.
Did you try this method?
[email protected] said:
Did you try this method?
Click to expand...
Click to collapse
Yes, and the above error is after trying this method.
I brick my phone and it bootloops... So i can't enter into the firmware...
I can't enter into any recovery so I can't sideload...
My only way is using EDL.. but I'm unable to enter... I completely turn it off, pressed both vol buttons and plug the cable
If I keep the buttons, it enters always en fastboot mode; if I not hold the buttons it tries to load the normal firmware and bootloads
How can I enter? Why I am unable to sideload?
Please help
Astur_Torque said:
I brick my phone and it bootloops... So i can't enter into the firmware...
I can't enter into any recovery so I can't sideload...
My only way is using EDL.. but I'm unable to enter... I completely turn it off, pressed both vol buttons and plug the cable
If I keep the buttons, it enters always en fastboot mode; if I not hold the buttons it tries to load the normal firmware and bootloads
How can I enter? Why I am unable to sideload?
Please help
Click to expand...
Click to collapse
Hold both volume buttons and power bottom to enter fastboot mode, in fast boot mode type fastboot boot twrp.img or what ever the twrp image name is and in twrp boot to EDL. Make sure MSM Download Tool to is up and running and you clicked the start button first. It will flash the firmware to the phone....
TheGhost1951 said:
Hold both volume buttons and power bottom to enter fastboot mode, in fast boot mode type fastboot boot twrp.img or what ever the twrp image name is and in twrp boot to EDL. Make sure MSM Download Tool to is up and running and you clicked the start button first. It will flash the firmware to the phone....
Click to expand...
Click to collapse
thanks, but I was completely unable to enter into twrp... when I put fastboot boot twrp.img or similar filename It always restarts and bootloops
Any idea what twrp version works?
Astur_Torque said:
thanks, but I was completely unable to enter into twrp... when I put fastboot boot twrp.img or similar filename It always restarts and bootloops
Any idea what twrp version works?
Click to expand...
Click to collapse
OnePlus 9 pro
Download twrp-3.7.0_11-0-lemonadep.img
Download page for twrp-3.7.0_11-0-lemonadep.img
dl.twrp.me
TheGhost1951 said:
OnePlus 9 pro
Download twrp-3.7.0_11-0-lemonadep.img
Download page for twrp-3.7.0_11-0-lemonadep.img
dl.twrp.me
Click to expand...
Click to collapse
With that it restarts but not load TWRP
I've been through some woes this week with MSM Tool and my advice for anyone that gets to that point this week when trying to get to Android 13 with root:
If you open MSM Tool and you don't see any ports or devices listed (ever), then you have a driver problem. If you get the Sahara error you have the wrong MSM Tool or more-likely, you didn't play Simon Says correctly with your buttons.
If you get the sahara error or you cannot ever get your phone into EDL mode, then do the following:
Take a deep breath
Unplug your phone
Grab your phone like a crab claw and mash both volume buttons and the power button so you can easily hold all 3 at the same time
Hold all 3 down for 30 seconds then let go
Wait a few seconds
Hold ONLY the volume buttons down for a few seconds
Did the phone turn on? If not then sweet the phone is off off
Now hold both volume buttons down for 10 seconds and then plug in your usb cable with MSM Tool already open
You should now be in EDL mode and if not you're bad at Simon Says so try again
If your screen is black and you get nothing back from MSM Tool then it's your drivers.
I focused so so much on changing PCs and cables and MSM Tools and fastboot commands when in reality drivers were my issue from the beginning and MSM Tool and EDL mode are both flakey. The above steps worked for me 100% of the time. You just have to actually wait a long time between your steps.
Astur_Torque said:
With that it restarts but not load TWRP
Click to expand...
Click to collapse
Time to MSM, there has to be a way to EDL!