Related
i am sorry but i have searched a lot but i couldn't unbrick my ZUK Z2, i flashed the Deodexed stock ROM and then the screen went all black with the LED glowing. If i press the power button i just see the ZUK logo and the screen goes black, i tried to boot it into fastboot but no luck. I somehow managed to get into the 9008 mode but while flashing with QFIL i get the sahara error saying unable to read header or something and with MiFlash i am getting "cannot read hello packet"
Any Help will be appreciated
EDIT:
The device has been fixed, i had to press the download button on the QFIL as soon as my phone boots into EDL mode.
did you flash through twrp? and if your bootloader if unlocked then you should have 5 sec bootloader placeholder from where u can reboot recovery . and if you are stuck into something different then it will be difficult to recover but possible. for sahara fail , play with settings in qfil like emmc, reset ,etc and try.And you can remove the port from device manager and retry if u r getting 9008 port.You should not get sahara fail. You will be get out of this easily just try things suggested. Your device is live as zuk logo is showing so dont worry.
And use latest qfil: http://www.androidbrick.com/download/download-latest-qualcomm-flasher-qfil-qpst-2-7-460/#
EDIT: Try this too-
Bootloader mode: shutdown state, press and hold the volume plus key + volume minus key, while the usb line connected to the computer until the release button.
Qualcomm QPST (9008 port) : shutdown state, press and hold the volume plus key, press the power button at the same time usb cable to connect the computer. This mode is a black screen state.
For recovery: press and hold the power key + the volume plus key + the volume down key until you release the release button.
Just buy DFC cable a.k.a Deep Flash Cable. The cable is same as you wire cable manualy
Kalp3sh S1NGH said:
i am sorry but i have searched a lot but i couldn't unbrick my ZUK Z2, i flashed the Deodexed stock ROM and then the screen went all black with the LED glowing. If i press the power button i just see the ZUK logo and the screen goes black, i tried to boot it into fastboot but no luck. I somehow managed to get into the 9008 mode but while flashing with QFIL i get the sahara error saying unable to read header or something and with MiFlash i am getting "cannot read hello packet"
Any Help will be appreciated
Click to expand...
Click to collapse
Onces that you are in 9008 mode you need to use ADB
"Adb reboot edl"
You are a lucky guy, i needed to conect grenn and black cable of the smartphone to put in 9008 mode
ozi87 said:
Onces that you are in 9008 mode you need to use ADB
"Adb reboot edl"
You are a lucky guy, i needed to conect grenn and black cable of the smartphone to put in 9008 mode
Click to expand...
Click to collapse
So i plug my phone in 9008 mode and go straight to adb?
Kalp3sh S1NGH said:
So i plug my phone in 9008 mode and go straight to adb?
Click to expand...
Click to collapse
Have you both any idea about adb! Edl is itself 9008 mode also called download mode. Adb is debug bridge and it is used in OS to control it by this bridge from PC.
pixel0 said:
Have you both any idea about adb! Edl is itself 9008 mode also called download mode. Adb is debug bridge and it is used in OS to control it by this bridge from PC.
Click to expand...
Click to collapse
yes exactly, that's why i asked.
pixel0 said:
did you flash through twrp? and if your bootloader if unlocked then you should have 5 sec bootloader placeholder from where u can reboot recovery . and if you are stuck into something different then it will be difficult to recover but possible. for sahara fail , play with settings in qfil like emmc, reset ,etc and try.And you can remove the port from device manager and retry if u r getting 9008 port.You should not get sahara fail. You will be get out of this easily just try things suggested. Your device is live as zuk logo is showing so dont worry.
And use latest qfil: http://www.androidbrick.com/download/download-latest-qualcomm-flasher-qfil-qpst-2-7-460/#
EDIT: Try this too-
Bootloader mode: shutdown state, press and hold the volume plus key + volume minus key, while the usb line connected to the computer until the release button.
Qualcomm QPST (9008 port) : shutdown state, press and hold the volume plus key, press the power button at the same time usb cable to connect the computer. This mode is a black screen state.
For recovery: press and hold the power key + the volume plus key + the volume down key until you release the release button.
Click to expand...
Click to collapse
I think the bootloader is locked again, i can't boot into recovery. I tried the latest QPST and still getting unable to read packet header read 0 bytes error and Sahara Failed.
Kalp3sh S1NGH said:
I think the bootloader is locked again, i can't boot into recovery. I tried the latest QPST and still getting unable to read packet header read 0 bytes error and Sahara Failed.
Click to expand...
Click to collapse
If bootloader is locked or unlocked , 9008 mode will work for sure. Also Use buttons combination to enter fastboot if u can then unlock and flash recovery from there .
To avoid this problem again, when you flash stock roms after using Custom Roms, make sure you format the System, data and cache partitions back to EXT4 format, since Stock firmware (even the moded ones) DOES NOT support any other System/Data/ Cache format.
After loading the bootloader, the phone will end with black screen and white led on. You just need to reboot on recovery again and advance format System/ Data/ Cache back to EXT4, connect the phone to the PC again, transfer the ROM file to the internal storage and make the Flash again...
Hope this help you
Hey everyone!
So, I've got a HD1903, 8GB RAM 128GB ROM. I updated to OxygenOS 11.0.02, but it was still buggy as hell, so I decided to downgrade. I also had rooted the phone, and decided to get rid of that too. I went to the stock fastboot roms page, downloaded the 10.0.13 ROM and used 'flash-all.bat' file to clear everything. But halfway, it reboots, goes into recovery, then goes to Qualcomm Crashdump mode. That's it. No code or anything, just Qualcomm Crashdump mode, in Blue and Red letters. I tried to hold vol-up, vol-down and power to get into fastboot, but it just loads the fastboot splash screen, then goes back to the same qualcomm crashdump mode screen. Even if i try to hard reset it, by holding vol-up and power, it still goes to the same screen.
Anyone know what to do? I have no idea how to use the 'MSM tool' that everyone talks about, so any guiding advice would be great!
Thanks!
DM me here - https://www.facebook.com/prantor.khan.16 I'll help
HueyT said:
Click to expand...
Click to collapse
I didn't install TWRP, this was all on stock recovery. I also cannot get into fastboot mode.
Msmtool does not need twrp or fastboot--just the software, rom image, drivers, and button combo pushes and holding
OK, so I got it working again, thanks to the advice of reddit users, discord users and the latest msm tool and some googling. I held the vol-up and vol-down buttons for 30 seconds, then connected it to the laptop, with msm running, to a usb 2.0 port, and pressed start. hey presto, it worked. Thanks guys!!
scoped_ar07 said:
Hello
Using the MSM tool is very simple, you just have to download it from this link.
https://drive.google.com/file/d/12y3lO0wIgb2_LSDeVw9x_2C_HjbgZlb_/view?usp=sharing
NOTE: only works on Windows PC
1. Unzip the contents of the RAR into a folder.
2. Run the MSM application
3. Click Start.
4. Connect the cell phone in EDL mode (volume up + down button)
5. Wait for the process to finish (it takes a long time, please be patient)
6. The phone will restart automatically and a message will appear informing you that the equipment is damaged (don't be careful).
Note: The phone should automatically boot into fastboot mode and display a menu, but if it doesn't and instead boots to the T-mobile screen, you need to force shutdown with the power button for several seconds and then manually start it in fastboot mode. (volume up + volume down + power button)
7. Now you need to unlock the bootloader with the command from a Windows CMD window, but you need to download this ADB tool first.
https://dl.google.com/android/repository/platform-tools-latest-windows.zip
-Unzip the tool into a folder
-Open a Windows command window, in administrator mode and direct it to the path where you unzipped the ADB tool.
8- Execute this command while the cell phone is connected in Fastboot mode.
fastboot flashing unlock_critical
9- A question will appear on the phone in which you must allow the unlocking.
-With the volume keys select the option to allow it and press the power button.
-At this time your bootloader will be unlocked.
10. Copy the ADB tool files into the folder where ROM 10.0.13 is and replace everything.
11. With the phone connected to the PC, on the command line, run the flash-all.bat file
12. When the phone restarts and the yellow and white letters appear informing that the phone is not safe because the bootloader is unlocked, repeatedly press the (volume down) button until a menu in Chinese appears.
-PC will detect the phone again in fastboot mode and continue to flash
-Leave the phone and PC still until the process is finished.
-In the command line it will indicate that it cannot find files or partitions (ignore it)
13. Finally, the computer will restart automatically and you will be able to use it normally.
Notes:
1. If the phone after the flashing process with MSM starts up and shows the T-mobile logo, don't worry, just turn it off with the power button and connect it in fastboot mode.
2. Do not try to use it with the firmware that I install with MSM, as it will not work properly.
3. Before locking the bootloader again (if you plan to do so) first update via OTA, to the most recent version of Oxygen, otherwise the system will crash again and you will have to repeat the whole process.
Click to expand...
Click to collapse
Stronger1101 said:
Hi
Using the MSM tool is very simple, you just have to download it from this link.
hotdogt_11_O.01_190920 op7t tmo usa patched unlock bootloader.7z
drive.google.com
NOTE: It only works on Windows pc
1. Unzip the contents of the RAR into a
2. Run the MSM application
3. Click Start
4. Connect the cell phone in EDL mode (volume up + volume down button)
5. Wait for the process to finish (it is delayed)
6. A message appears informing that the equipment is damaged, do not be careful.
7- Now you must unlock the bootloader with a command from a windows CMD window, but first you must download this ADB tool.
https://dl.google.com/android/repository/platform-tools-latest-windows.zip
-Unzip the tool into a folder
-Open a windows command window, in administrator mode and direct it to the path where you unzipped the ADB tool.
8. Now run this command while the cell phone is connected in Fastboot mode.
fastboo ...
Hi
Using the MSM tool is very simple, you just have to download it from this link.
https://drive.google.com/file/d/12y3lO0wIgb2_LSDeVw9x_2C_HjbgZlb_/view?usp=sharing
NOTE: Only works on Windows PC
1. Unzip the contents of the RAR into a folder
2. Run the MSM application
3. Click Start
4. Connect the cell phone in EDL mode (volume up + volume down button)
5. Wait for the process to finish (it's time consuming, be patient)
6. The phone will restart automatically and a message will appear informing you that the equipment is damaged (don't be careful).
Note: The phone should automatically start in fastboot mode and show a menu, but if it doesn't and instead starts on the T-mobile screen, you must force shutdown with the power button for several seconds and then manually start it in fastboot mode. (volume up + volume down + power button)
7. Now you must unlock the bootloader with command from a windows CMD window, but first you must download this ADB tool.
https://dl.google.com/android/repository/platform-tools-latest-windows.zip
-Unzip the tool into a folder
-Open a windows command window, in administrator mode and direct it to the path where you unzipped the ADB tool.
8- Execute this command while the cell phone is connected in Fastboot mode.
fastboot flashing unlock_critical
9- A question will appear on the phone in which you must allow the unlocking.
-With the volume keys select the option to allow it and press the power button.
-At this moment your bootloader will be unlocked.
10. Copy the ADB tool files into the folder where ROM 10.0.13 is and replace everything.
11. With the phone connected to the PC, in the command line, run the file flash-all.bat
12. When the phone restarts and the yellow and white letters appear informing that the phone is unsafe due to having the bootloader unlocked, repeatedly press the (volume down) button until a menu in Chinese appears.
-The PC will detect the phone again in fastboot mode, and continue flashing
-Leave the phone and the pc still until the process is finished.
-In the command line it will indicate that it cannot find files or partitions (don't pay attention)
13. Finally the equipment will restart automatically and you will be able to use it normally.
Notes:
1. If the phone after the flashing process with MSM starts up and shows the T-mobile logo, don't worry, just force it off with the power button and connect it in fastboot mode.
2. Do not try to use it with the firmware that I install with MSM, as it will not work properly.
3. Before blocking the bootloader again (if you plan to do it) first update via OTA, to the most recent version of Oxygen, otherwise it will crash the system again and you will have to repeat the whole process.
Click to expand...
Click to collapse
Oh wow that was a long and well defined post. Thank you for taking the time to type it out.
As it happens, I fixed my issue already (IDK if there's a solved flair for XDA or something?). I downloaded the latest (10.0.15) MSM Tool from the XDA page, held the vol-up and vol-down for 30 seconds this time (as per advice from discord users) got the phone into edl mode, connected to a usb 2.0 port and let msm tool do it's thing. Everything is working perfectly now.
I've got the same problem but even with holding vol up+down buttons for 30 seconds I can't get into edl mode. It boots into qualcomm crashdump mode. I don't have fastboot working, I only see fastboot splash screen for a sec and then qualcomm crashdump mode appears. Could someone help?! As soon as usb cable is connected phone boots into qualcomm crashdump mode. no matter what I do.
Also do service centers undertake servicing for such phones which bricked because of badly flashed roms.
Āryan-9909 said:
Also do service centers undertake servicing for such phones which bricked because of badly flashed roms.
Click to expand...
Click to collapse
Yes, theyll just change out the motherboard
HueyT said:
Yes, theyll just change out the motherboard
Click to expand...
Click to collapse
If they're going to just change the motherboard, I wonder what the EDL mode is meant for. Anyways, I won't go for motherboard change one can buy a new and better phone at that kinda price.
Anyways, I Fixed it through EDL method, you have to hold vol up and down simultaneously and immediately connect to windows (while still holding both buttons) via original USB cable. Check with Device manager if your device shows up, it's easy enough but you might have to keep trying to you get it right. Thereafter, disable driver verification in windows and if Sahara communications failed message appears in msm tool, turn off phone and repeat the procedure again.
The repair peeps only fix hardware and not software. It's more cost effective for them to swap out hardware faster than messing with msmtool like us
Āryan-9909 said:
I've got the same problem but even with holding vol up+down buttons for 30 seconds I can't get into edl mode. It boots into qualcomm crashdump mode. I don't have fastboot working, I only see fastboot splash screen for a sec and then qualcomm crashdump mode appears. Could someone help?! As soon as usb cable is connected phone boots into qualcomm crashdump mode. no matter what I do.
Click to expand...
Click to collapse
OK, so you won't get any confirmation that you're in EDL modem you just have to wing it. What I did, I first opened the MSM tool on my laptop, connected the USB side to the laptop at a USB 2.0 port, and kept the USB-C side within easy reach. I held the buttons down with one thumb for 30-35 seconds, and while still holding them down with one hand, i connected the cable to the phone and clicked enum in MSM, it showed connected so I let the buttons go, and it didn't restart. I clicked start, and it worked for me.
scoped_ar07 said:
OK, so you won't get any confirmation that you're in EDL modem you just have to wing it. What I did, I first opened the MSM tool on my laptop, connected the USB side to the laptop at a USB 2.0 port, and kept the USB-C side within easy reach. I held the buttons down with one thumb for 30-35 seconds, and while still holding them down with one hand, i connected the cable to the phone and clicked enum in MSM, it showed connected so I let the buttons go, and it didn't restart. I clicked start, and it worked for me.
Click to expand...
Click to collapse
You don't have to hold buttons for that long, you can immediately connect it to PC. There is usually a sound to indicate that a new device has been connected to windows, you can also keep device manager open for confirmation. This video really helped.
After receiving a " qualcomm crash dump" , I was able to boot into recovery. Then I had done a factory reset.
Phone turns on fine, charges as well.
Although, On my Laptop / Desktop it does not see the phone within MSM, ASs well as ADB, Fastbootd or device manager.
I have the correct drivers downloaded.
Ideas ?
hightech316 said:
After receiving a " qualcomm crash dump" , I was able to boot into recovery. Then I had done a factory reset.
Phone turns on fine, charges as well.
Although, On my Laptop / Desktop it does not see the phone within MSM, ASs well as ADB, Fastbootd or device manager.
I have the correct drivers downloaded.
Ideas ?
Click to expand...
Click to collapse
Qualcomm 9008 drivers too?
HueyT said:
Qualcomm 9008 drivers too?
Click to expand...
Click to collapse
Yes.
I went ahead and ran another factory reset via recovery, no luck.
New cable, another PC?
HueyT said:
New cable, another PC?
Click to expand...
Click to collapse
Tried both, my desktop would always connect, adb, fastboot, etc.
I had just just freshly installed oneplus drivers including qualcomm on my laptop. Device was not recognized before driver installation or after.
Figure id try on my Mac, and linux laptop. no dice.
ADB is enabled.
Here are the drivers that are installed on my PC ( I enabled hidden devices, in order to see them ) These were recognizing prior to " qualcomm crash dump" . Not phone will not even be seen
I do not know in depth about all this stuff, I've just been thrown into it because my phone decided to brick itself in a system update after it got into my hands. I updated it and it went into crash dump, a few times, the just nonstop boot looped with the oneplus logo on, and some pixels bugging, then it stopped showing the oneplus logo all together and just boot loops, I can go into fast boot and nothing else, if I restart bootloader it now goes to a charge menu and rarely actually restarts fast boot, I just tried msm and I've tried booting into twrp but it wont work, i believe this is because the phone wont connect to my pc properly but i have tried universal adb drivers, new sdk, and official QUALCOMM ones to all get the same result of appearing in device manager as just andrioud and nothing else with no options for drivers, on msm it would show up but it wouldn't get past waiting for device. also i cant find a proper twrp rom for the 9 pro on here, atleast the stock one, nor can i find it anywhere else, i can only find the img. also i feel I'm missing something with flashing on the fastboot and am not seeing if I'm supposed to be doing something (of the limited things i can do) on the phone, or its all in commands and stuff on here. sorry this is horribly written, I'm tired and stressed because of this.
Search stock rom and download
unzip rom ,connect your phone in download mode and flash STOCK ROM.
DaNyaWa said:
Search stock rom and download
unzip rom ,connect your phone in download mode and flash STOCK ROM.
Click to expand...
Click to collapse
what is download mode
Shaggers said:
I do not know in depth about all this stuff, I've just been thrown into it because my phone decided to brick itself in a system update after it got into my hands. I updated it and it went into crash dump, a few times, the just nonstop boot looped with the oneplus logo on, and some pixels bugging, then it stopped showing the oneplus logo all together and just boot loops, I can go into fast boot and nothing else, if I restart bootloader it now goes to a charge menu and rarely actually restarts fast boot, I just tried msm and I've tried booting into twrp but it wont work, i believe this is because the phone wont connect to my pc properly but i have tried universal adb drivers, new sdk, and official QUALCOMM ones to all get the same result of appearing in device manager as just andrioud and nothing else with no options for drivers, on msm it would show up but it wouldn't get past waiting for device. also i cant find a proper twrp rom for the 9 pro on here, atleast the stock one, nor can i find it anywhere else, i can only find the img. also i feel I'm missing something with flashing on the fastboot and am not seeing if I'm supposed to be doing something (of the limited things i can do) on the phone, or its all in commands and stuff on here. sorry this is horribly written, I'm tired and stressed because of this.
Click to expand...
Click to collapse
I suggest to try the MSM tool again.
MSM tool for OP9pro you can find here : MSM tool OP9pro
More guides how to use it find here : MSM guide
Shaggers said:
what is download mode
Click to expand...
Click to collapse
You shod download "EDL" tool (even called MSN)
unzip and exetute ad admin (read specifications and troubleshooting in the related thread)
ensure tour phone is off
press and keep both volume buttons while connecting it to PC
then the COM X connection should become "green + connected"
go with "start" and just wait the processo to end
Shaggers said:
what is download mode
Click to expand...
Click to collapse
Volume up+power
DaNyaWa said:
Volume up+power
Click to expand...
Click to collapse
Download mode is not vol up + power, that's bootloader
EDL (Download mode) is both vol buttons + power
It should show up in the device manager on the computer as a Qualcomm device if it's worked correctly.
djsubterrain said:
Download mode is not vol up + power, that's bootloader
EDL (Download mode) is both vol buttons + power
It should show up in the device manager on the computer as a Qualcomm device if it's worked correctly.
Click to expand...
Click to collapse
EDL mode is NOT both Volume buttons + Power, it's just HOLDING BOTH THE VOLUME BUTTONS and WHILE HOLDING THE VOLUME BUTTONS, CONNECT THE USB CABLE. The phone needs to be in a switched OFF state before doing this.
By holding both volume buttons and the power button, you will force restart your phone into bootloader mode (fastboot mode).
And VOLUME UP + POWER BUTTON is recovery mode.
djsubterrain said:
Download mode is not vol up + power, that's bootloader
EDL (Download mode) is both vol buttons + power
It should show up in the device manager on the computer as a Qualcomm device if it's worked correctly.
Click to expand...
Click to collapse
Sory ok
Powerup+powerdown
DaNyaWa said:
Sory ok
Powerup+powerdown
Click to expand...
Click to collapse
Power up + power down?
[SOLVED see post below]
Hi all,
Just bricked my Phone and can't access MSM. Hope you can help me. I will try to be very clear on the steps I took to get to this point.
Device: EU OnePlus 9 Pro
What is was trying to do: Go from rooted C.47 to Pixel Entended ROM
What I did:
Code:
Unrooted using Magisk uninstall option
Updated to c.48 through OTA
Go to lineageOS page on how to ensure all firmware partitions are consistent
very stupidly did not flash dtbo and vendor boot partition
did adb reboot fastboot in stead of abd reboot bootloader
Download the "lineage-19.1-20220701-recovery-lemonadep.img" and tried to temporaryly flash it by
fastboot flash boot <recovery_filename>.img
This resulted in the device getting stuck on the 1+ boot logo.
I can still force turn it off by holding Volume Up + Power.
When I try to access EDL by turned off and Vol UP + Vol Down + Plug and release, My PC makes a connection sound and the screen stay black for a while. After +- 10 seconds, the PC makes a disconnection sound and the phone boots up and gets stuck again on the 1+ bootup icon.
Also my phone won't stay turned off when plugged in the charger or pc
Yes, but what is it presenting as (i.e. EDL, fastboot, ADB, UMS...) when it connects?
If this is Windows, UsbLog.exe is handy to identify things popping up (as long as they have drivers installed).
For a list of devices that have ever tried to connect, try "enumusb.exe /l".
Both available here: https://www.temblast.com/windows.htm
Renate said:
Yes, but what is it presenting as (i.e. EDL, fastboot, ADB, UMS...) when it connects?
If this is Windows, UsbLog.exe is handy to identify things popping up (as long as they have drivers installed).
For a list of devices that have ever tried to connect, try "enumusb.exe /l".
Both available here: https://www.temblast.com/windows.htm
Click to expand...
Click to collapse
I will try this
I found the issue:
> EDL exits after 10 seconds if it is not captured by the MSM tool.
> The MSM tool only monitored 4 of my 10 USB ports
> So it was not captured because I was plugged in to an unmonitored USB port and rebooted after 10 seconds
> I have successfully used the MSM tool now
Oh! A bit off-topic, but I have never understood why EDL is commonly used over a "serial" port.
The interface that EDL presents is a generic USB bulk interface with two endpoints. You can use it just like that.
But no. They have to use a Qualcomm driver that makes it look like a "serial" port and then you can connect to that.
Me? I use a generic "WinUSB" Zadig driver. I have an EDL client that just connects to that fine.
So does the Python client implementation.
Also, I've never run into that 10 second timeout.
TraktorHenk said:
[SOLVED see post below]
Hi all,
Just bricked my Phone and can't access MSM. Hope you can help me. I will try to be very clear on the steps I took to get to this point.
Device: EU OnePlus 9 Pro
What is was trying to do: Go from rooted C.47 to Pixel Entended ROM
What I did:
Code:
Unrooted using Magisk uninstall option
Updated to c.48 through OTA
Go to lineageOS page on how to ensure all firmware partitions are consistent
very stupidly did not flash dtbo and vendor boot partition
did adb reboot fastboot in stead of abd reboot bootloader
Download the "lineage-19.1-20220701-recovery-lemonadep.img" and tried to temporaryly flash it by
fastboot flash boot <recovery_filename>.img
This resulted in the device getting stuck on the 1+ boot logo.
I can still force turn it off by holding Volume Up + Power.
When I try to access EDL by turned off and Vol UP + Vol Down + Plug and release, My PC makes a connection sound and the screen stay black for a while. After +- 10 seconds, the PC makes a disconnection sound and the phone boots up and gets stuck again on the 1+ bootup icon.
Also my phone won't stay turned off when plugged in the charger or pc
Click to expand...
Click to collapse
Your phone needs to be in OFF state mode when you're using EDL.
So, very simple:
Enter bootloader mode by holding both volume buttons with the power button together till your phone restarts and enters the bootloader.
From the bootloader screen you can use the volume buttons to navigate through the choices and you can select "Switch off".
When you complete this, you need to hold both volume buttons, and while holding them connect the cable (PC).
If you don't have or you don't have the correct Qualcomm EDL drivers installed, your phone will reboot or start to boot, it won't stay in EDL mode for longer than 10 seconds.
I also got the correct drivers for you, but you need to install the drivers manually while your device is in "EDL" mode, so, you need to be a bit "fast".
I have even a video for you, but need to upload it to YouTube so you can watch it.
I'll share you here the drivers just in case if you're familiar with a manual installation of the drivers.
ekin_strops said:
Your phone needs to be in OFF state mode when you're using EDL.
So, very simple:
Enter bootloader mode by holding both volume buttons with the power button together till your phone restarts and enters the bootloader.
From the bootloader screen you can use the volume buttons to navigate through the choices and you can select "Switch off".
When you complete this, you need to hold both volume buttons, and while holding them connect the cable (PC).
If you don't have or you don't have the correct Qualcomm EDL drivers installed, your phone will reboot or start to boot, it won't stay in EDL mode for longer than 10 seconds.
I also got the correct drivers for you, but you need to install the drivers manually while your device is in "EDL" mode, so, you need to be a bit "fast".
I have even a video for you, but need to upload it to YouTube so you can watch it.
I'll share you here the drivers just in case if you're familiar with a manual installation of the drivers.
Click to expand...
Click to collapse
Thanks for the help. The problem ended up to be a bit different than this for me, but this is a good post for anyone to find in the future!
Hi,
My Oneplus 11 phone that I had converted from Colors OX to Oxygen OS following a restart only reboots on 1+, sometimes it goes to the recovery menu, the use of the power and volume keys to return to fasboot mode no longer have any effect... it hasn't even been recognized by a pc... Except the usb to charge seems to be working. What can I do in the face of so much mishap because I can't find a solution?
Thanks
Same situation here. I've tried everything for a month. No luck. Only thing you can do is send it back to Oppo or Oneplus
msm tools is the only thing can save it but require official authorization to log in. So don't bother trying anymore.
kikoleboss said:
Hi,
My Oneplus 11 phone that I had converted from Colors OX to Oxygen OS following a restart only reboots on 1+, sometimes it goes to the recovery menu, the use of the power and volume keys to return to fasboot mode no longer have any effect... it hasn't even been recognized by a pc... Except the usb to charge seems to be working. What can I do in the face of so much mishap because I can't find a solution?
Thanks
Click to expand...
Click to collapse
Does the phone boot into recovery by itself when you turn it on? or do you boot it into recovery yourself?
ChrisFeiveel84 said:
Does the phone boot into recovery by itself when you turn it on? or do you boot it into recovery yourself?
Click to expand...
Click to collapse
I would rather say by itself with several restarts alone on the 1+ screen, it arrives on the recovery screen alone and I choose english power off, I press again and it's the same cycle, I can choose reboot device it doesn't change nothing
kikoleboss said:
I would rather say by itself with several restarts alone on the 1+ screen, it arrives on the recovery screen alone and I choose english power off, I press again and it's the same cycle, I can choose reboot device it doesn't change nothing
Click to expand...
Click to collapse
already made a factory reset in the recovery and tried to boot ?
ChrisFeiveel84 said:
already made a factory reset in the recovery and tried to boot ?
Click to expand...
Click to collapse
Doesn't work I do but nothing ... Thank you for your help and no usb recognize only reboot reboot reboot and Recovery/language
If you have any idea or soft to do something ?
because only reboot reboot reboot
kikoleboss said:
Doesn't work I do but nothing ... Thank you for your help and no usb recognize only reboot reboot reboot and Recovery/language
Click to expand...
Click to collapse
Try holding volume up + volume down during boot, it should go into bootloader mode (start holding them before you power on the device by pressing the power button and continue holding them during boot). If it doesn't go into bootloader mode it's very weird because recovery is loaded after the bootloader.
TheNewHEROBRINE said:
Try holding volume up + volume down during boot, it should go into bootloader mode (start holding them before you power on the device by pressing the power button and continue holding them during boot). If it doesn't go into bootloader mode it's very weird because recovery is loaded after the bootloader.
Click to expand...
Click to collapse
Thanks but no change only reboot more speed
if i press the three buttons when booting in fact it turns on and off faster then i stop the three buttons, it stays on the 1+ screen for a long time fixed then arrives at the language screen
chines english
I corrected but I think it's because I press the volume and power button that it launches in fastbootd but no more bootloader and no ubs recognition
Any idea please ? no chance for me
kikoleboss said:
Thanks but no change only reboot more speed
if i press the three buttons when booting in fact it turns on and off faster then i stop the three buttons, it stays on the 1+ screen for a long time fixed then arrives at the language screen
chines english
I corrected but I think it's because I press the volume and power button that it launches in fastbootd but no more bootloader and no ubs recognition
Any idea please ? no chance for me
Click to expand...
Click to collapse
Very strange, fastbootd is inside the recovery and could be unbootable but normal bootloader mode should work nonetheless. Try having the phone connected to PC why attempting the button combination, maybe they added this security measure.
This device is hard bricked. I faced the same issue. Any key combinations won't take you to fastboot to fix. I gave it to service centre to fix.
TheNewHEROBRINE said:
Very strange, fastbootd is inside the recovery and could be unbootable but normal bootloader mode should work nonetheless. Try having the phone connected to PC why attempting the button combination, maybe they added this security measure.
Click to expand...
Click to collapse
When he can boot to fastbootd he can fix the phone
My phone is not bricked and i can with key Combo not boot to fastboot .
Power off
And press power, voll down and voll up boot to edl.
Power off
Voll down and Power boot to recovery
Power off
Voll up and power normal boot to system
When you can boot to fastbootd you can flash the full firmware over fastbootd
With fbe (Same firmware what you have used on your phone )
A hard brick is when you phone goes only in edl
kikoleboss said:
Thanks but no change only reboot more speed
if i press the three buttons when booting in fact it turns on and off faster then i stop the three buttons, it stays on the 1+ screen for a long time fixed then arrives at the language screen
chines english
I corrected but I think it's because I press the volume and power button that it launches in fastbootd but no more bootloader and no ubs recognition
Any idea please ? no chance for me
Click to expand...
Click to collapse
ChrisFeiveel84 said:
When you can boot to fastbootd you can flash the full firmware over fastbootd
With fbe (Same firmware what you have used on your phone )
A hard brick is when you phone goes only in edl
Click to expand...
Click to collapse
He has got a very strange brick, he can boot to recovery but not to bootloader, so it's not an hard brick like when you can only go into EDL mode. Did seriously OnePlus remove the possibility to enter bootloader mode with a key combo??? They make it worse with every phone they release, first edl, now fastboot. What will be next?
ChrisFeiveel84 said:
When you can boot to fastbootd you can flash the full firmware over fastbootd
With fbe (Same firmware what you have used on your phone )
A hard brick is when you phone goes only in edl
Click to expand...
Click to collapse
But no usb recognize with fastboot enhance
How I can flash ?
kikoleboss said:
But no usb recognize with fastboot enhance
How I can flash ?
Click to expand...
Click to collapse
You can boot to fastbootd?
TheNewHEROBRINE said:
He has got a very strange brick, he can boot to recovery but not to bootloader, so it's not an hard brick like when you can only go into EDL mode. Did seriously OnePlus remove the possibility to enter bootloader mode with a key combo??? They make it worse with every phone they release, first edl, now fastboot. What will be next?
Click to expand...
Click to collapse
I am very seriously annoyed, I can't find any solution since the usb is no longer recognized
kikoleboss said:
But no usb recognize with fastboot enhance
How I can flash ?
Click to expand...
Click to collapse
Is the fastboot driver installed ?
TheNewHEROBRINE said:
You can boot to fastbootd?
Click to expand...
Click to collapse
yes the phone go only on fastbootd with volume and power
ChrisFeiveel84 said:
Is the fastboot driver installed ?
Click to expand...
Click to collapse
normally yes the same on two pc
but how can i be sure
On CMD
fastboot flashing unlock
< waiting for any device >
Fastboot enhance nothing because no usb recognize
kikoleboss said:
yes the phone go only on fastbootd with volume and power
Click to expand...
Click to collapse
Are you sure that's not just recovery mode?