| Need to revive my HARD-BRICKED Redmi 1s | First of all, let me clarify myself :
1. If I say SOFT-BRICKED, then that means the device is either stuck on boot screen or boot-loops., for which I don't need any assist, because one can still access the recovery mode (volume up + power button combination) or the fastboot mode (volume down + power button combination) and then you can flash proper stock ROM either {directly from recovery mode} or {through fastboot mode with the help of a PC and MiFlash Tool}. If that be the case then you can find proper ROM for your device on Mi official website with procedure on their forums and threads.
2. My problem is with HARD-BRICKED device, i.e. my Redmi 1s won't power on. And don't tell me to give the above mentioned solution for "SOFT-BRICKED" because I can't access neither the recovery mode nor the fastboot mode. If it did I would have already fixed it myself and 've no need to post this thread! Also the notification light on my Redmi 1s has gone dead, i.e. while charging it doesn't blinks anymore, nor does my PC recognizes it. Actually it is a problem of flashing wrong or improper ROM on the device.
Need Help ASAP
How to revive SOFT-BRICKED Redmi 1s
To revive your SOFT-BRICKED Redmi 1s, (i.e. the screen is stuck on boot screen) follow the procedure :
1. Download the Mi Flash Tool on your PC.
2. Download the latest Gloabal version of Redmi 1s Fastboot ROM on your PC.
3. Extract the ROM zipped file which you downloaded.
4. Open Mi Flash Tool. Browse and select the "images" folder inside the folder which you extracted.
5. Click on "Browse" to access drop-down menu and select "Advanced". In the new dialog box, make sure that FlashBoot Script is set default to "flash_all_except_storage.bat".
6. Now press the volume down + power button on your Redmi 1s till you see the Mi Fastboot Logo.
7. Now connect your Redmi 1s to your PC; and in Mi Flash Tool click refresh to view your device in the list below. Once displayed, select it and hit the "Flash" button.
8. Download the Gloabal version of Redmi 1s Recovery ROM on your PC. Note that this is Recovery ROM and the previous one was Fastboot ROM. They Both are not the same.
9. Once you've downloaded the Recovery ROM, rename the zipped file to "update.zip" and keep it permanently in the root-folder of your internal memory of Redmi 1s. This will help you to flash Stock ROM just by going into Recovery Mode (volume up + power button combination) and selecting install update.zip. Next time if the same problem occurs, you won't have to use the above procedure again. Just re-Flash the ROM from Recovery Mode.
Hope I could've helped.
Bu1ba$aur said:
To revive your SOFT-BRICKED Redmi 1s, (i.e. the screen is stuck on boot screen) follow the procedure :
Hope I could've helped.
Click to expand...
Click to collapse
You didn't understand that it can't acces the fastboot?
Because is not my work I give you the link:
HERE
Hope that you can solve your problem.
Solution?
Hi,
did you finally got a solution to your HARD bricked problem?
i have same issue (completely dead)
i do have the same problem please inform me if any gets solution for this
my redmi 1s is dead. i insert usb cable in phone then charging led blinking but not detected in windows. what can i do? plz help.............
same problem here, it detects COM10 port on windows7 pc
same problem here, it detects COM10 port on windows7 pc when connected, qualcomm device, any chance to get back from here, Authorised service center would be able to help me???
---------- Post added at 02:56 PM ---------- Previous post was at 01:59 PM ----------
Bu1ba$aur said:
| Need to revive my HARD-BRICKED Redmi 1s | First of all, let me clarify myself :
1. If I say SOFT-BRICKED, then that means the device is either stuck on boot screen or boot-loops., for which I don't need any assist, because one can still access the recovery mode (volume up + power button combination) or the fastboot mode (volume down + power button combination) and then you can flash proper stock ROM either {directly from recovery mode} or {through fastboot mode with the help of a PC and MiFlash Tool}. If that be the case then you can find proper ROM for your device on Mi official website with procedure on their forums and threads.
2. My problem is with HARD-BRICKED device, i.e. my Redmi 1s won't power on. And don't tell me to give the above mentioned solution for "SOFT-BRICKED" because I can't access neither the recovery mode nor the fastboot mode. If it did I would have already fixed it myself and 've no need to post this thread! Also the notification light on my Redmi 1s has gone dead, i.e. while charging it doesn't blinks anymore, nor does my PC recognizes it. Actually it is a problem of flashing wrong or improper ROM on the device.
Need Help ASAP
Click to expand...
Click to collapse
I found this on miui.com
thread-54139-1-1.html
try this and update ASAP here
Same but Different
@Bu1ba$aur I think i have the HardBricked symptoms but in my case when i do flash my MT6592 device it works... i mean, the program (SP Flash Tool) says it's complete, no problems, no errors, full progress bar but, at the end my phone doesn't nothing, no boot, no logo, no charging, and i've been tryng with its stock rom
Hello..I have a similar situation here. I Couldn't locate the solution here if there is any..can someone please point to the right direction.
My Situation:- My Redmi 1s does not recognize by the PC nor in Linux using lsusb command. I had also tried the "Touch point" Method as advised in the official Miui Forum. In Nutshell, My device is hard bricked and there is noway to revive it per my knowledge. So, If anyone can help me out here would be great..and I would appreciate it greatly.
Thanks.
i think this could help you all. follow the instructions carefully
http://forum.xda-developers.com/and.../guide-how-to-reboot-to-edl-fastboot-t3394292
Hi
Redmi 1S
same problem.
The above link tried not working cause unable to go to fastboot mode.
Help please
Thanks in advance
my 1s got stuck at mi logo screen, but i flashed successfully via fastboot mode. Still it doesnt workout,pls help asap!
Bu1ba$aur said:
| Need to revive my HARD-BRICKED Redmi 1s | First of all, let me clarify myself :
1. If I say SOFT-BRICKED, then that means the device is either stuck on boot screen or boot-loops., for which I don't need any assist, because one can still access the recovery mode (volume up + power button combination) or the fastboot mode (volume down + power button combination) and then you can flash proper stock ROM either {directly from recovery mode} or {through fastboot mode with the help of a PC and MiFlash Tool}. If that be the case then you can find proper ROM for your device on Mi official website with procedure on their forums and threads.
2. My problem is with HARD-BRICKED device, i.e. my Redmi 1s won't power on. And don't tell me to give the above mentioned solution for "SOFT-BRICKED" because I can't access neither the recovery mode nor the fastboot mode. If it did I would have already fixed it myself and 've no need to post this thread! Also the notification light on my Redmi 1s has gone dead, i.e. while charging it doesn't blinks anymore, nor does my PC recognizes it. Actually it is a problem of flashing wrong or improper ROM on the device.
Need Help ASAP
Click to expand...
Click to collapse
Just see this tutorial it will definitely help you : http://en.miui.com/forum.php?mod=viewthread&tid=54139&extra=&highlight=redmi+1S+no+fastboot&page=1
---------- Post added at 10:30 AM ---------- Previous post was at 10:29 AM ----------
amas said:
Hi
Redmi 1S
same problem.
The above link tried not working cause unable to go to fastboot mode.
Help please
Thanks in advance
Click to expand...
Click to collapse
This will help you : http://en.miui.com/forum.php?mod=viewthread&tid=54139&extra=&highlight=redmi+1S+no+fastboot&page=1
:good::good::good::good:
adharshvr said:
Just see this tutorial it will definitely help you : http://en.miui.com/forum.php?mod=viewthread&tid=54139&extra=&highlight=redmi+1S+no+fastboot&page=1
---------- Post added at 10:30 AM ---------- Previous post was at 10:29 AM ----------
This will help you : http://en.miui.com/forum.php?mod=viewthread&tid=54139&extra=&highlight=redmi+1S+no+fastboot&page=1
:good::good::good::good:
Click to expand...
Click to collapse
Can anyone proof if this works?
Or will this work on xiaomi note pro ?
I have problem is 2013029 redmi 1s flash after dead only show red light... Qualcomm port 9008 port not show only show 9006 port than not a flash any tool. please any solution is hardware issue ya software issue guide me
my redmi 1s is stuck in bootloop
I cant access recovery mode or Fastboot mode
Device restarts by itself once i plug in battery.
Help please
Related
hello everybody.
i got a 3/64gb mi max and tried to flash twrp and the miui 8 eu version.
For some reason the phone bricked (flashing the MI logo and then nothing).
i managed to get it on edl mode, i downloaded the official chinese and eu roms but no matter which one i try to flash i get this message and it doesnt go on after that.
any suggestions ?
the phone goes into EDL mode, and also goes into fastboot mode when i keep the vol - and power button. It's working but i can't flash the official rom cause of this message and when i try to flash TWRP, the screen flashes the MI logo and then nothing.
Same problem I had when flashing the latest EU ROM using TWRP with a locked bootloader. Here's what I did to fix it:
1. Make sure you have the latest Qualcomm USB drivers installed
2. Start up Miflash, make sure the right fastboot package is selected
3. Connect your phone to the PC. Hold down Power, Vol- and Vol+ together until you get a short vibration.
4. Check Windows Device Manager. Under Ports, you should see a Qualcomm 9008 QDLoader device. If you see a 9000 port or whatever, disconnect the phone, reconnect it and hold down all three buttons again.
5. Press Refresh in Miflash, you should see a COM10 device. Flashing should be successful.
oatcooky said:
Same problem I had when flashing the latest EU ROM using TWRP with a locked bootloader. Here's what I did to fix it:
1. Make sure you have the latest Qualcomm USB drivers installed
2. Start up Miflash, make sure the right fastboot package is selected
3. Connect your phone to the PC. Hold down Power, Vol- and Vol+ together until you get a short vibration.
4. Check Windows Device Manager. Under Ports, you should see a Qualcomm 9008 QDLoader device. If you see a 9000 port or whatever, disconnect the phone, reconnect it and hold down all three buttons again.
5. Press Refresh in Miflash, you should see a COM10 device. Flashing should be successful.
Click to expand...
Click to collapse
Just tried it. Same message shows up unfortunately
I have the same Problem, bat i use a old Version of Mi Flash. IT works better
Gesendet von meinem Mi Max mit Tapatalk
May i know what windows version you're using it..?, coz old version of MiFlash tool doesn't support running under 32bit system.
Maybe you can try using latest version of MiFlash tool..
You can download it from here..
If official link above doesn't work..just download from here..
Hope it's help..
You must also mark option "Flash all" in MiFlesh.
There is a solution. I have tried everything but mistake was to obvious to posiible really. I was using wrong ROM version to flash it. Had "can not read from port ..." or "can not received hello packet data".
Firts of all download miflash beta. Then check your processor type because this is what define your rom. I thought that my Mi Max 64GB is a hydrogen ROM. Wasted because of that about 30 hours of my precious life Then I realised that my ROM is helium. I downloaded helium_global_images_V8.1.9.0.MBDMIDI_20170103
Flashed it for a first time.
google:
Discussion Solved Bootloop, Cannot receive hello packet, Object reference not set to an
Hello Guys,
I need the RAW files to download please could anyone please indicate a link or upload the ROM please? I've been on my phone for more than 3 weeks and can not find anywhere.
Thank you very much for the attention of all. A big hug!
http://dlcdnet.asus.com/pub/ASUS/Ze...59.353408663.1494812275-1536164900.1482540343
BahaStriker said:
http://dlcdnet.asus.com/pub/ASUS/Ze...59.353408663.1494812275-1536164900.1482540343
Click to expand...
Click to collapse
Hello Baha Striker!
How did you get the flash in this ROM? What tool did you use? I'm trying to use QFIL because it was the only one that recognized my device. But I'm having trouble locating .XML to do the flash and finally fix my device.
My device does not turn on, it only recognizes in windows task manager like qualcomm hs-usb qdloader 9008. Thanks a lot for the help.
landognr said:
Hello Baha Striker!
How did you get the flash in this ROM? What tool did you use? I'm trying to use QFIL because it was the only one that recognized my device. But I'm having trouble locating .XML to do the flash and finally fix my device.
My device does not turn on, it only recognizes in windows task manager like qualcomm hs-usb qdloader 9008. Thanks a lot for the help.
Click to expand...
Click to collapse
Hey mate, I had the same issue before I know it seems that it's the only way that your phone get recognized with but in matter of fact if you keep trying to boot on fastboot it'll boot there eventually.. so keep trying the keys combination till it works and a reminder fastboot on this device is when it stays on Asus logo screen so when you get there just flash recovery and install your ROM like normal
BahaStriker said:
Hey mate, I had the same issue before I know it seems that it's the only way that your phone get recognized with but in matter of fact if you keep trying to boot on fastboot it'll boot there eventually.. so keep trying the keys combination till it works and a reminder fastboot on this device is when it stays on Asus logo screen so when you get there just flash recovery and install your ROM like normal
Click to expand...
Click to collapse
Ok friend, let me see if I get it. Do I keep trying until my phone goes into fastboot? Does he eventually enter? So all I have to do is press the power button + vol up and keep trying until an ASUS logo appears? Thank you so much for helping, my friend, God bless you!
BahaStriker said:
Hey mate, I had the same issue before I know it seems that it's the only way that your phone get recognized with but in matter of fact if you keep trying to boot on fastboot it'll boot there eventually.. so keep trying the keys combination till it works and a reminder fastboot on this device is when it stays on Asus logo screen so when you get there just flash recovery and install your ROM like normal
Click to expand...
Click to collapse
Hello Baha,
I tried today all day to make this device go into fastboot mode but I did not succeed. I try the combinations Power + vol up, Power + vol down, only power and all the buttons.
Could you kindly explain me better how you got into your device's fastboot mode? Was it connected to the charger or pc or was it disconnected?
Thank you
Fastboot mode :
1) Turn off the ASUS ZENFONE 3 DELUXE ZS570KL
2) Press and hold Volume Up button (do not release and continue to No.3)
3) Press and hold Power button (No.2 still continue press and hold), so now we hold Volume Up Button + Power Button together
4) Wait until vibrate appear at ASUS ZENFONE 3 DELUXE ZS570KL, then release Power button (do not release Volume Up button)
5) If we see Logo appear at LCD screen, then release Volume Up button (release all button now)
Alguma solução para nosso zenfone 3 deluxe ?
arquivos Qfil para zenfone 3 deluxe ?
Ok guys,just I need help ,I can get to the fasboot ,my pc recognize my Asus zenphone deluxe3 (2,15) I have ADB and fasboot instaled Just I tried many times flash twrp and no luck....my bootloader is locked and my Asus in in bootloop ...ale what I can do ,is just to boot in fasboot....so how can I instal twrp? Is there any chance?
quotation
WW-15.0210.1810.73 stock recovery & RAW
Database--https://drive.google.com/drive/folders/0By3NdBos6w6JZEloNDFMaDVxS0U
willinko23 said:
Ok guys,just I need help ,I can get to the fasboot ,my pc recognize my Asus zenphone deluxe3 (2,15) I have ADB and fasboot instaled Just I tried many times flash twrp and no luck....my bootloader is locked and my Asus in in bootloop ...ale what I can do ,is just to boot in fasboot....so how can I instal twrp? Is there any chance?
Click to expand...
Click to collapse
Same promlem, I hope somebody can help us out
install a custom rom for my xiaomi redmi note 8 and when the installation is finished my device does not turn on (turn on and turn off) attached video.please if you can help me I would appreciate it.
PD: my pc doesn't even recognize it, ATTACHED 2 VIDEOS.
https://mega.nz/#!QtEH2A4L!UOzCSjwxSs22bjsLJE9ZsJRZzD0FcEaOCti9RUn8nLw
TI1002539352 said:
install a custom rom for my xiaomi redmi note 8 and when the installation is finished my device does not turn on (turn on and turn off) attached video.please if you can help me I would appreciate it.
PD: my pc doesn't even recognize it, ATTACHED 2 VIDEOS.
https://mega.nz/#!QtEH2A4L!UOzCSjwxSs22bjsLJE9ZsJRZzD0FcEaOCti9RUn8nLw
Click to expand...
Click to collapse
What ROM are you flashing?
What device are you using? Ginkgo or Willow?
Can you access recovery or fastboot mode?
1) pixel experience
2) willow
3) I can't get into fastboot mode it turns off instantly.
TI1002539352 said:
1) pixel experience
2) willow
3) I can't get into fastboot mode it turns off instantly.
Click to expand...
Click to collapse
- Try to enter to recovery.
- Try to enter to fastboot BUT with device connected to PC.
- if none works be sure that you are proceeding with device totally/really off; for this connect to your PC then press the 3 buttons for aprox. 5 seconds and when you see that your device is shutting down press vol. down + pwr to enter to fastboot.
I'll try
hello brothers please help me. I wrote the original rom to the phone with flash tool. but the phone storage fills up by itself. the gyroscope deck is up. and when the power is turned on, the phone restarts by itself and the question pops up.
Fix : ramdump slpi (Storage Keep On Filling Up Without Doing Anything) POCO F3 / Redmi K40 / Mi 11x
Hi All, I hope doing well, it's difficult to say without seeing them. Will explain how I fixed this. Cause : I messed up with my `Persist` partition while restoring TWRP Backup. Solution : • Reboot to Recovery > Manage Partition > Select...
forum.xda-developers.com
Maybe this helps, is sounds similar.
semseddin1 said:
hello brothers please help me. I wrote the original rom to the phone with flash tool. but the phone storage fills up by itself. the gyroscope deck is up. and when the power is turned on, the phone restarts by itself and the question pops up.
Click to expand...
Click to collapse
If your bootloader is unlocked and you can access FASTBOOT then you could try,
Preinstall notes,
The Bootloader needs to be unlocked and USB drivers installed.
Rom installation
1. Start with a clean install of the Xiaomi.eu V12. Download and Unzip Xiaomi.eu V12 rom and install via FASTBOOT.
1a. To enter Fastboot mode, turn off your F3 and hold down the Volume down & power buttons together until you see Fastboot.
1b. Using a PC, Run the .bat file: windows_fastboot_first_install_with_data_format.bat
and complete the initial install.
I hope it helps,
Good luck
So if I do this, will my mobile device be fixed? Because I have the gyroscope deck removed, there is a ramdump error in the storage, will it be fixed if I do these?
Read this discussion.May be this can help you here https://forum.xda-developers.com/f/xiaomi-manana-poco-f3-xiaomi-mi-11x-redmi-k40.12161/ If yes then please mentioned me here.
I download all the drivers. Previously i fash rom in my same device no problem face. after that used miuisr rom. but when i try to go miuivn and for that i flash TWRP to Oragne fox recovery , and then the problem start. when i reboot o or power off the device did not boot up or power on. after lots of try sometimes its power on. also no storeage found in PC. also no fastboot device found in fastboot mode. Please if you know anything please give me some way to solve my problem
antorsky2010 said:
I download all the drivers. Previously i fash rom in my same device no problem face. after that used miuisr rom. but when i try to go miuivn and for that i flash TWRP to Oragne fox recovery , and then the problem start. when i reboot o or power off the device did not boot up or power on. after lots of try sometimes its power on. also no storeage found in PC. also no fastboot device found in fastboot mode. Please if you know anything please give me some way to solve my problem
Click to expand...
Click to collapse
Hi,
Been there, i had mega problems with my pc not detecting my F3 in fastboot mode, the Answer was to use a cheapy Targus 4 port usb adaptor,
you could check this thred:
Fastboot not working in Windows 11 [Resolved]
Hello! I cant get my Windows 11 virtual machine to detect my Xiaomi 12 when its in Fastboot mode. Does any one happen to have any ideas to solve this? It shows up as 'Android' in device manager. I've also attempted to install a drivers manually...
forum.xda-developers.com
The XDA member Titek found the solution,
I hope you sort it.