Develop Bugs

Realme 3 BOOTLOADER UNLOCK TOOL FOR ANDROID 10

Want to unlock your bootloader? Here is the step-by-step guide you have been waiting for - but please make sure to read the disclaimer too so you will know what to expect!
Keep in mind that the process of unlocking the bootloader will be referred to as in-depth test in the tutorial.
First, please read the “Disclaimer” carefully.
【Disclaimer】
1. After unlocking your phone ALL OF YOUR DATA WILL BE ERASED! Backup before you proceed.
2. In-depth test may have unforeseeable impacts on your phone.
3. Some functions may not operate properly because of third-party firmware, such as the photo-taking function of the camera. It may also cause device damage.
4. Personal and confidential information on phone may leak, and security may be compromised.
Second, read the steps below for the in-depth test
Preparation:
realme 3 - with 60%+ battery
1 x USB Cable
1 x PC / MacBook
Step 1. Make sure you have backed up your data, unlocking your phone will erase all of your data.
Step 2. Make sure your system version is the official and latest one.
Step 3. Download and install the unlock tool apk on your phone.
https://drive.google.com/file/d/1Xum-VSQVJ4c5HqnqGtHdShGXn3Mq1CPc/view?usp=sharing
Install it to apply for the bootloader unlock via the tool.
Step 4. Follow the detailed steps below to unlock the bootloader.
#1. Open unlock tool.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
#2. Click “Start applying”.
#3. Please read the disclaimer in detail, select the checkbox, and submit your application.
#4. The application will be checked by our servers.
#5. Within approximately 1 hour, the unlock tool apk will show the status of the unlock request - if it shows the unlocking is successful, please proceed to the following step.
#6. You can now click “Start the in-depth test” and the device will reboot automatically. The following string will display on the screen: fast boot_unlock_verify ok
#7. Download and install the fastboot tool on your PC or MacBook (check this https://www.xda-developers.com/google-releases-separate-adb-and-fastboot-binary-downloads/), use a cable to connect phone and PC. In Fastboot mode use engineering command in the picture below to unlock
- Enter the command: adb reboot bootloader
- Press “Enter”on your keyboard
- Enter the command: fastboot flashing unlock
- Press “Enter”on your keyboard
#8. On your phone press the Volume Up key to select “Unlock” (or press the Volume Down key if you have changed your mind to select “Do not unlock bootloader”).
When you click the Volume Up, you will enter the new interface showed below.
Then enter command "fastboot reboot”. Then phone will reboot and enter the in-depth test mode - all user data on the phone will be erased - we recommend you perform a data backup prior to applying
FAQ
Q1: How to relock the bootloader?
#1. Download the unlock tool again to apply to exit the in-depth test.
#2. Click “Apply to exit in-depth test”. Your phone will reboot automatically, and you will enter the Fastboot mode.
#3. In the Fastboot mode, use the engineering command below on your PC to re-lock the bootloader.
- Enter the command: adb reboot bootloader
- Press “Enter” on your keyboard
- Enter the command: fastboot flashing lock
- Press “Enter” on your keyboard
#4. Press the Volume Up button to select the “Lock bootloader” option (or press the Volume Down button to select “Do not lock bootloader" and keep it unlocked).
Then enter command "fastboot reboot”. The phone will reboot and exit the in-depth test mode. All user data on the phone will be erased - we recommend you perform a data backup prior to applying.

ok so , i don't know what i have done XD
i think i unlocked the boot loader a year ago or so
and i think i didn't do it correctly , tbh i don't know
but now the app is like this
and when i try to boot to fastboot it says
"the serial is not match fastboot unlock verify fail"​i appreciate it if anyone can help me , thanks

AhmedSalehxz said:
ok so , i don't know what i have done XD
i think i unlocked the boot loader a year ago or so
and i think i didn't do it correctly , tbh i don't know
but now the app is like this
View attachment 5344591
and when i try to boot to fastboot it says
"the serial is not match fastboot unlock verify fail"​i appreciate it if anyone can help me , thanks
Click to expand...
Click to collapse
i have the same problem did you find a fix for it?

is this methode still work in 2022?? i've tried installed in depth test, then i run it but something happened is . it said " no network connection , please check the network setting and retry " , i've tried using wifi and carrier data both are same.
any clue?

SikupleDroid said:
is this methode still work in 2022?? i've tried installed in depth test, then i run it but something happened is . it said " no network connection , please check the network setting and retry " , i've tried using wifi and carrier data both are same.
View attachment 5642399
any clue?
Click to expand...
Click to collapse
I downloaded it from here and the error is gone https://c.realme.com/in/post-details/1291657309679779840

No succes trying to unlock my Swift 2x

Hi, I spent several hours trying to unlock my phone. Tried following steps:
* I made a full backup
* I did full reset to original settings: Androïd 8.1.0
* I got myself developers rights
* in settings turned on 'usb debugging' , 'OEM unlock' and 'advanced restart'
After turning off device and restart ('power/vol up' buttons), device started in recovery mode
* downloaded 'ADB + Fastboot-package' on Win10-PC and tried in every conceivable way to install but phone would not not connect; recovery boot indicated device was locked; PC did not recognize phone
and impossible to flash TWRP-recovery
* I installed Magisk-manager on phone with succes to avoid having to use a PC; but then flashing TWRP did not succeed
What did I wrong, what do I wrong? Suggestions VERY welcome. after all this I had rather not return to original OS. Thanks for your help.

With the phone in fastboot mode issue "fastboot devices" make sure you get a response.
Then "fastboot oem unlock - go"

Thank. you very much for your answer. Problem is that after rebooting with <power + volup> I get a menu with ao START (in green), Power off (i n white), Recovery mode (in red) and Restart Bootloader (in red). Further on I read FASTBOOT MODE (in red), product name etc., SECURE BOOT -enabled (in white). and DVEICE. STATE - locked (in red). How do I get my phone in 'fastboot mode'?
Thanks for help.

hepkeb said:
How do I get my phone in 'fastboot mode'?
Thanks for help.
Click to expand...
Click to collapse
First you select Fastboot
Spoiler: Fastboot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then you get in Fastboot Mode, then connect your cable to your Pc
Spoiler: Fastboot Mode
THIS IS FASTBOOT !

Thank you for trying to help. Of course I know how to get in fastboot mode. My problem is that in 'every' mode my telephone is locked, and I do not succeed in unlocking it. I cannot connect to another device, Magisk installation not complete etc. Again: I have developers right, I unlocked OEM, I did allow USB-debugging but no unlocked device!? What is going wrong, or has Wileyfox blocked the normal unlocking-procedure?

hepkeb said:
Thank. you very much for your answer. Problem is that after rebooting with <power + volup> I get a menu with ao START (in green), Power off (i n white), Recovery mode (in red) and Restart Bootloader (in red). Further on I read FASTBOOT MODE (in red), product name etc., SECURE BOOT -enabled (in white). and DVEICE. STATE - locked (in red). How do I get my phone in 'fastboot mode'?
Thanks for help.
Click to expand...
Click to collapse
That is fast boot mode

robin0800 said:
That is fast boot mode
Click to expand...
Click to collapse
I have exactly the same problem. I do not have access to the phone and a hard reset leads me to having to enter a googe account synced with the device which I do not have the details of. I can enter the mode that you describe above and the FASTBOOT MODE is in red below. Now when I'm here and plug into my laptop wth USB and fire up fastboot.exe and issue 'fastboot device' it just says '< waiting for device >'.
Did you manage to make any progress on this issue at all, I'm really stuck!

download adb and fastboot from here
[OFFICIAL][TOOL][WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3
15 seconds ADB Installer v1.4.3 ADB, Fastboot and Drivers What is this? This is All-in-One installer for 3 most needed PC tools for Android. No need to download big SDK for 3 small things. I originaly made it for my Kurdish friend AnGrY DuDe in...
forum.xda-developers.com
unzip the file and then install adb and fastboot, no drivers needed on win ten.
enable debugging and debugging notifier on phone.
open a command prompt and do "adb Devices"
the first time you do this you should get a notification on your phone accept it.
do "adb Devices" again and the phone should be seen.
do adb reboot bootloader
you should be in fastboot now
do fastboot devices and then fastboot oem unlock - go.

robi0800 said:
download adb and fastboot from here
[OFFICIAL][TOOL][WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3
15 seconds ADB Installer v1.4.3 ADB, Fastboot and Drivers What is this? This is All-in-One installer for 3 most needed PC tools for Android. No need to download big SDK for 3 small things. I originaly made it for my Kurdish friend AnGrY DuDe in...
forum.xda-developers.com
unzip the file and then install adb and fastboot, no drivers needed on win ten.
enable debugging and debugging notifier on phone.
open a command prompt and do "adb Devices"
the first time you do this you should get a notification on your phone accept it.
do "adb Devices" again and the phone should be seen.
do adb reboot bootloader
you should be in fastboot now
do fastboot devices and then fastboot oem unlock - go.
Click to expand...
Click to collapse
Thanks robi0800 but I don't have access to the phone so I can't enable USB debugging which means I can't use adb. I am trying to use fastboot but when I issue the command 'fastboot device' it can't connect to the phone and just displays '< waiting for device >'. Any other advice on how to make my Win10 laptop recognise the device when I plug it in so I can use fastoot successfully?

Sounds like you are missing a driver you could try the driver from the package in post #8 above?

Thanks robin0800, I've tried that package with the original Wileyfox red USB cable, no luck unfortunately. My Win10 laptop can see the device in Device Manager but adb Devices will not list anything, neither will fastboot. I don't have access to the phone to enable usb debugging.

Bermudan said:
Thanks robin0800, I've tried that package with the original Wileyfox red USB cable, no luck unfortunately. My Win10 laptop can see the device in Device Manager but adb Devices will not list anything, neither will fastboot. I don't have access to the phone to enable usb debugging.
Click to expand...
Click to collapse
Adb will not see it if debugging is not enabled but fastboot does not need this but the phone must be in recovery mode

robin0800 said:
Adb will not see it if debugging is not enabled but fastboot does not need this but the phone must be in recovery mode
Click to expand...
Click to collapse
Thanks - and to put it in recovery mode is this just Powebutton + Vol Up for several seconds or Vol Down, I can't recall...

How to root Your MICROMAX IN1B (64GB)

First of all, before i start, I'll make this clear, i have done this procedure and rooted my IN1B successfully BUT if anything goes wrong with your device,
I WILL NOT BE RESPONSIBLE FOR BRICKED DEVICES
PreRequisites (Stuff you will need)
So, Let's get into it.
Before Begining, Here are the things you'll need :-
1. A windows PC with all the necessary drivers.
2. ADB and fastboot which you can get from here.
3. A USB C cable, preferably the original one.
4. Make sure your Device is atleast 60% charged.
5. Backup all your data because the very first step will reset your phone.
NOTE- MICROMAX DOES NOT PROVIDE ANY USB DRIVERS. So i had trouble finding the Drivers too, so i recomend you use "Driver booster" it's free, you can get it from here. After installing the driver booster, let it scan and then update all the drivers related to "Android" and "ADB".
That's it, once you are done with all the above points we are good to start.
These are the PATCHED files you need to flash to root your device.
1. Get the files from Here
After you download the files, copy and paste the files in the folder where ADB & Fastboot is located, if you have not changed the Install location, it should be at this directory- C:\Program Files (x86)\Minimal ADB and Fastboot
After you paste all the 3 downloaded files in the ADB folder, the process will now start.
Unlocking the BootLoader
The first step is to unlock the boot loader.
1. Connect your device with a USB C cable.
2. Enable USB debugging from the developer options-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Now run ADB and run this command- adb devices As you run this, something like this should appear on your mobile-
4. Now allow it and Voila!, you are now connected!
5. Now find "OEM Unlocking" and enable it.
6. Now enter this command- adb reboot bootloader As you run this command your device will reboot and show a black screen with only "fastboot" written on it.
7. Now finally Enter this command- fastboot flashing unlock
8. Now it will ask you to confirm, if you change your mind and dont want to root now, press the "Volume-Down" Button or if you want to root, press the "Volume-Up" button.
NOTE- UNLOCK MAY VOID SOFTARE WARRANTY. FOR DETAILS, CHECK THIS (Read 6e)
9. Awesome! Now you have unlocked your boot loader!!
Flashing the Patched Files
Now remember you need the 3 files i linked above, once you get them, paste them in the ADB folder.
Make sure you DON't change the file names.
Let's Start!
1. Run this command- fastboot flash boot patched_boot.img
2. After that, Run this- fastboot --disable-verification flash vbmeta vbmeta.img
3 And he final command, run this- fastboot flash recovery recovery.img
After all these 3 complete succesfully, Just run- fastboot reboot This will start your device normally, go on and set up your device.
1.As you complete the setup, you should see the magisk app-
2. Now the magisk app will ask you to install the full version, click on confirm and it will install the magisk app, you will have to turn on the "Unknown sources" option.
3. Once it is installed, you can ENJOY YOUR ROOTED IN 1B!!
IF YOU NEED ANY HELP, FEEL FREE TO WRITE IT BELOW, OR DM ME ON TELEGRAM- Âkio or DISCORD- Âkio#7134

Akahat27 said:
First of all, before i start, I'll make this clear, i have done this procedure and rooted my IN1B successfully BUT if anything goes wrong with your device,
I WILL NOT BE RESPONSIBLE FOR BRICKED DEVICES
PreRequisites (Stuff you will need)
So, Let's get into it.
Before Begining, Here are the things you'll need :-
1. A windows PC with all the necessary drivers.
2. ADB and fastboot which you can get from here.
3. A USB C cable, preferably the original one.
4. Make sure your Device is atleast 60% charged.
5. Backup all your data because the very first step will reset your phone.
NOTE- MICROMAX DOES NOT PROVIDE ANY USB DRIVERS. So i had trouble finding the Drivers too, so i recomend you use "Driver booster" it's free, you can get it from here. After installing the driver booster, let it scan and then update all the drivers related to "Android" and "ADB".
That's it, once you are done with all the above points we are good to start.
These are the PATCHED files you need to flash to root your device.
1. Get the files from Here
After you download the files, copy and paste the files in the folder where ADB & Fastboot is located, if you have not changed the Install location, it should be at this directory- C:\Program Files (x86)\Minimal ADB and Fastboot
After you paste all the 3 downloaded files in the ADB folder, the process will now start.
Unlocking the BootLoader
The first step is to unlock the boot loader.
1. Connect your device with a USB C cable.
2. Enable USB debugging from the developer options-
View attachment 5326971
3. Now run ADB and run this command- adb devices As you run this, something like this should appear on your mobile-
View attachment 5326979
4. Now allow it and Voila!, you are now connected!
5. Now find "OEM Unlocking" and enable it.
View attachment 5326983
6. Now enter this command- adb reboot bootloader As you run this command your device will reboot and show a black screen with only "fastboot" written on it.
7. Now finally Enter this command- fastboot flashing unlock
8. Now it will ask you to confirm, if you change your mind and dont want to root now, press the "Volume-Down" Button or if you want to root, press the "Volume-Up" button.
NOTE- UNLOCK MAY VOID SOFTARE WARRANTY. FOR DETAILS, CHECK THIS (Read 6e)
9. Awesome! Now you have unlocked your boot loader!!
Flashing the Patched Files
Now remember you need the 3 files i linked above, once you get them, paste them in the ADB folder.
Make sure you DON't change the file names.
Let's Start!
1. Run this command- fastboot flash boot patched_boot.img
2. After that, Run this- fastboot --disable-verification flash vbmeta vbmeta.img
3 And he final command, run this- fastboot flash recovery recovery.img
After all these 3 complete succesfully, Just run- fastboot reboot This will start your device normally, go on and set up your device.
1.As you complete the setup, you should see the magisk app-
View attachment 5326989
2. Now the magisk app will ask you to install the full version, click on confirm and it will install the magisk app, you will have to turn on the "Unknown sources" option.
3. Once it is installed, you can ENJOY YOUR ROOTED IN 1B!!
IF YOU NEED ANY HELP, FEEL FREE TO WRITE IT BELOW, OR DM ME ON TELEGRAM- Âkio or DISCORD- Âkio#7134
Click to expand...
Click to collapse
ON which android version u have done this given me firmware name

pankspoo said:
ON which android version u have done this given me firmware name
Click to expand...
Click to collapse
I did on the android 10 which it initially came with..

VS986 in trouble /solved

Good day everyone!
I have LG G4 VS986 UsU /e/. I took apart and looked at the motherboard - VS986. But my camera hasn't worked for a long time. I tried all the firmwares for USU'd vs986, and the camera did not work on one of them. So I decided to try installing the stock firmware (maybe the camera will work on it).
In general, I started the firmware process, according to this instruction:
[UNLOCK][UNOFFICIAL][G4] Unlock ANY* LG G4 device with UsU
Spoiler: FAQ 28)b)
1. extract with SALT system + boot + modem partition of the stock ROM kdz of your choice (I took this one: VS9862BA_00_0525_ARB02.kdz)
2. flash them in fastboot:
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash modem modem.img
3. boot TWRP (if you do not get into TWRP at the first try it gets overwritten. if that happens you must re-flash TWRP in fastboot) - here i am stuck!
4. flash the baseband package of your model
5. factory reset in TWRP (obviously all your data will be lost - so backup before)
6. if you encounter issues FORMAT data in TWRP (obviously all your data will be lost - so backup before)
But got stuck at point 3. The phone cannot boot into TWRP and FASTBOOT, but it can into DOWNLOAD MODE. Does anyone have any options on what to do next and how to fix it?

xDev91 said:
Good day everyone!
I have LG G4 VS986 UsU /e/. I took apart and looked at the motherboard - VS986. But my camera hasn't worked for a long time. I tried all the firmwares for USU'd vs986, and the camera did not work on one of them. So I decided to try installing the stock firmware (maybe the camera will work on it).
In general, I started the firmware process, according to this instruction:
[UNLOCK][UNOFFICIAL][G4] Unlock ANY* LG G4 device with UsU
Spoiler: FAQ 28)b)
1. extract with SALT system + boot + modem partition of the stock ROM kdz of your choice (I took this one: VS9862BA_00_0525_ARB02.kdz)
2. flash them in fastboot:
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash modem modem.img
3. boot TWRP (if you do not get into TWRP at the first try it gets overwritten. if that happens you must re-flash TWRP in fastboot) - here i am stuck!
4. flash the baseband package of your model
5. factory reset in TWRP (obviously all your data will be lost - so backup before)
6. if you encounter issues FORMAT data in TWRP (obviously all your data will be lost - so backup before)
But got stuck at point 3. The phone cannot boot into TWRP and FASTBOOT, but it can into DOWNLOAD MODE. Does anyone have any options on what to do next and how to fix it?
Click to expand...
Click to collapse
Fastboot must work. Do you have followed the guide briefly?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When booting into android you can use adb to reboot into fastboot with: adb reboot bootloader
...but the above procedure has to work in any case

Fastboot must work. Do you have followed the guide briefly?
Click to expand...
Click to collapse
Yes, I did. I tried to go in this way too, but it didn't work.
When booting into android you can use adb to reboot into fastboot with: adb reboot bootloader
Click to expand...
Click to collapse
That was the point - Android did not boot completely (showed the installation of applications 1-33, and then rebooted and showed the splash screen).
I was able to start Android later:
I typed it, - I held down all three buttons (volume + and -, and the on / off button) - and licked out the menu with the proposal to format the data and answers "yes" and "no". After formatting, Android is fully loaded!
Alas, the camera still doesn't work. And now, when I booted through adb to Fastboot and flashed TWRP, I cannot enter the Recovery menu! Tried to go through the Fastboot command: fastboot reboot recovery; and pressing the buttons doesn't work either. The phone just boots into the system. Are there any ways how to get the Recovery back?

xDev91 said:
Yes, I did. I tried to go in this way too, but it didn't work.
That was the point - Android did not boot completely (showed the installation of applications 1-33, and then rebooted and showed the splash screen).
I was able to start Android later:
I typed it, - I held down all three buttons (volume + and -, and the on / off button) - and licked out the menu with the proposal to format the data and answers "yes" and "no". After formatting, Android is fully loaded!
Alas, the camera still doesn't work. And now, when I booted through adb to Fastboot and flashed TWRP, I cannot enter the Recovery menu! Tried to go through the Fastboot command: fastboot reboot recovery; and pressing the buttons doesn't work either. The phone just boots into the system. Are there any ways how to get the Recovery back?
Click to expand...
Click to collapse
the process to enter fastboot works. 100%. maybe your volume button is not working properly.
yes you have to format data when you flash a new ROM. that is the case always when switching between ROMs - and stock is just another ROM so here you need to do that as well ofc.
fastboot reboot recovery does not work here. you have to use the key combo and if that does not work for recovery as well you likely have an issue with your hardware buttons. after flashing TWRP you have to boot directly into it otherwise it will be overwritten on boot. so adb reboot recovery won't work either. last but not least fastboot boot does not work when UsU'd.
so. first of all fix you volume button. maybe disassemble the back cover and see if you see dust/dirt anywhere near the volume button. try pressing the vol down button harder when trying to get into recovery.
if all that does not help and you cannot fix the button problem you could ofc flash TWRP in fastboot to both: the recovery AND the boot (!) partition. Then you can reboot and it will directly load TWRP. here choose reboot-> recovery to be in the correct slot. last you push the boot image from the stock ROM to the device and in TWRP press install (switch to "img"), select the boot image and choose "boot" as target. now you can reboot and TWRP should be still there. but honestly.. fix your volume button

steadfasterX said:
maybe your volume button is not working properly.
Click to expand...
Click to collapse
You were right. The volume button "-" was not quite functional.
I thank you, steadfasterX, for your support. Thanks for the advice. All the best to you!

Question Can not boot any more

Hello comunity,
I installed TWRP on my Galaxy A72 to install Magisk but now I cant Boot any more. Please help my.
I hope you can help me. Moritz

Did you follow all the steps on the XDA thread?
If yes, it could be possible that you additionally need to flash services disabler

Moritz_pro said:
Hello comunity,
I installed TWRP on my Galaxy A72 to install Magisk but now I cant Boot any more. Please help my.
I hope you can help me. Moritz
Click to expand...
Click to collapse
Probably you flashed TWRP image at "fastboot boot TWRPLOL.img" this happens it . now do this,fastboot flash recovery YourTWRP.img then type fastboot reboot then Get your orginal boot.IMG from your Phone version's firmare folder by 7zip or winrar. then do fastboot flash boot boot.img then type fastboot reboot

hey Idk Who can help me for SPOOF(Change by random TEXT) Any android 5.1 to Android8's BASEBRAND Version and KERNEL Version ? How I can change it ? Phone ROOTED and XPosed module ready(not Virtual xposed) ? Please find it or Create new Xposed APK or SUPERuser(ROOT right) APK for Change BASEBRAND and Kernel Version,You know it writes under settings/about phone,Everything changing exclude these.Please Helpme,or if i can do this manually from which file /system or where ?

ineedstoplaggerwatchers said:
Probably you flashed TWRP image at "fastboot boot TWRPLOL.img" this happens it . now do this,fastboot flash recovery YourTWRP.img then type fastboot reboot then Get your orginal boot.IMG from your Phone version's firmare folder by 7zip or winrar. then do fastboot flash boot boot.img then type fastboot reboot
Click to expand...
Click to collapse
I'm not sure if I am understanding all what you are saying right, so please tell me more detailed so I dont't make it worse.

turn of ur phone by holding power button 15 second then wait and be sure phone will not try reboot,then
Press and hold the Power, Volume Down and Home buttons for seconds;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then the device will be the fastboot mode.
get this file then open it (Try open it by 7zip or winrar then extract it there),then click startCMD then type fastboot commands that i talked about it. but first type "fastboot devices" for be sure if it see your fastboot mode phone....... download this https://dl.twrp.me/a72q/twrp-3.6.2_11-1-a72q.img then rename it recovery(Right click on file then click properties and be sure if it says type of file: img file , so fullfile name must be recovery.img then put it into Adb&FastbootCommnderPrayForMe folder then enter this command "fastboot flash recovery recovery.img" then type fastboot reboot then remove cable quick,try power on ur phone, if it still stuck on boot then Poweroff by holding power button 15 second then 2 second later press power button by Volume Up Button together after 3 second later unpress power then continue holding volume up button,If twrp menu opened,swipe right adn go Wipe menu and ONLY chose Clear Cache , then restart phone . if still stuck then go Adb&FastbootCommnderPrayForMe folder and copy recovery.img file to same place and rename it boot(full file name must be boot.img), then go open command then type "fastboot flash boot boot.img" after enter it,Then type fastboot reboot and enter it. if still do same . then Find ur firmware's actual boot.img from your phone device model's firmare version File(firmware versions around 2GB to 10GB)'s boot.img . u can find it in internet too.Hope all works and i will be happy for u too

when I type Fastboot devices my Phone is not regionized what should I do?

Normally PC does not find your device as MTP device while you Hold POWER+home+volumeDown button(I mean fastboot mode without phone bootup).Coz it Shows device as MTP device after Phone bootedup(online).Maybe you tried install its driver as MTP by chosing manual install ? first download and install real usb driver(Adb&fastboot driver) of your samsung phone. https://developer.samsung.com/android-usb-driver then install it. then replug ur phone. Then go Device Manager of your PC,then replug your usb cable,and if you see New Device found like "unknow device or fastboot" then click them then click Properties on it, then click Update driver then click browse for Driver then click Let me pick from list then UNCHECK(unclick) "Show compatible hardware" then find your SAMSUNG ADB driver(if u cant see then click PORTS maybe it installed under Ports drivers) then click next to update it as Fastboot driver . but You can change your PC language to English for See same words in your Pc menus for I help you better coz im not German . but if already your secreen opens ? then you need go phone Settings / about phone/ Tap your phone Firm version 10 times and enable developer menu then enable USB ADB debug for install adb driver easily.if your phone screen not showing anything on screen . then you must just do fastboot mode by fastboot mode keys for install fastboot(samsung android usb driver or ADB driver another name)

When I am in the recovery mode then I see the MTP Window. When I am in the Download Mode I see the other window. I don't now waht the fastboot mode is.

Moritz_pro said:
When I am in the recovery mode then I see the MTP Window. When I am in the Download Mode I see the other window. I don't now waht the fastboot mode is.
Click to expand...
Click to collapse
Ignore what the other guy said above, fastboot is not a thing on Samsung phones. You can make it work with some patches however, but by default there is no fastboot.

ok can you tell me in detail so what do you think is the problem and wehre can I find these patches

Simon1511 said:
Did you follow all the steps on the XDA thread?
If yes, it could be possible that you additionally need to flash services disabler
Click to expand...
Click to collapse
There should be no issues if properly following the XDA thread's instructions.
Moritz_pro said:
ok can you tell me in detail so what do you think is the problem and wehre can I find these patches
Click to expand...
Click to collapse

Thank you for remaining me this option I forgot about it, but I installed a custom Rom, but I'd like to run again on the original software can I install it again. If not, it doesn't matter, but it would be better.

The Rom won't start, the start sign appears but doesn't finish loading.
[ROM][12.1][ENCRYPTION][EOL] LineageOS 19.1 for A52 4G and A72
LineageOS is a free, community built, aftermarket firmware distribution of Android 12.1/12L, which is designed to increase performance and reliability over stock Android for your device. LineageOS is based on the Android Open Source Project with...
forum.xda-developers.com