Develop Bugs

Potentially bricked Desire...

Hey everyone, I'm sad to say that earlier I dropped my beloved Desire and it's not booted properly since e.g. I can only get onto the dialer.
The long and short of it is that I can't mount my SD card, clockwork won't allow it and says it has:
E:can't mount /dev/block/mmcblk0p1
no such file or directory
E: can't mount /sdcard
And ADB doesn't find my device when I type adb devices.
I've come across a few posts but I'm pretty clueless as to what they actually mean...
I've heard this particular command fixes it in Linux...
sudo mkdir /mnt/cdrom
sudo mount /dev/cdrom /mnt/cdrom
cd /mnt/cdrom/root
/mnt/cdrom/root/fastboot oem enableqxdm 0
But how would I go about doing that, and is there a way of doing that in Windows? I assume that because adb can't see my device then that's a no... It knows it's plugged in because it makes the connection sound and I can see it in device manager.
It's currently S-OFF'd with AlphaRev 1.8 running a Cyanogenmod nightly that I had running for a few days without problem so I assume it's not that. I can get into Fastboot (not much good if Windows doesn't see my device), bootloader and Clockwork.
I feel really stuck right now and would really appreciate the help of one of you knowledgeable lot.
Bearing in mind I'm not very knowledgeable so anything you explain would really have to be explained well!
Thanks guy's.

http://forum.ppcgeeks.com/archive/index.php?t-125093.html

Thanks for that, but ADB doesn't see my device so I can't use that.

DesireRoss said:
Thanks for that, but ADB doesn't see my device so I can't use that.
Click to expand...
Click to collapse
When your on bootloader screen and you plug your usb in does it change to say that you have plugged in usb ? because fastboot isn't adb
Hboot has an option for fastboot
Enable the SD Card functionality. Boot your phone in FASTBOOT mode (back + power), and enter this command: 'fastboot oem enableqxdm 0' . This will re-enable your SD card.
read up on http://forum.xda-developers.com/showthread.php?t=691187

BigMrB said:
When your on bootloader screen and you plug your usb in does it change to say that you have plugged in usb ? because fastboot isn't adb
Hboot has an option for fastboot
Enable the SD Card functionality. Boot your phone in FASTBOOT mode (back + power), and enter this command: 'fastboot oem enableqxdm 0' . This will re-enable your SD card.
read up on http://forum.xda-developers.com/showthread.php?t=691187
Click to expand...
Click to collapse
When I plug it in, all the drivers get installed and it changes to 'HBOOT USB PLUG' on the bootloader. The problem is when I type in 'adb devices' it doesn't show my Desire. I can't fastboot that command because it can't find the phone itself..?

DesireRoss said:
When I plug it in, all the drivers get installed and it changes to 'HBOOT USB PLUG' on the bootloader. The problem is when I type in 'adb devices' it doesn't show my Desire. I can't fastboot that command because it can't find the phone itself..?
Click to expand...
Click to collapse
You have to boot your phone into fastboot.
Code:
fastboot devices
does not work in hboot mode.

MatDrOiD said:
You have to boot your phone into fastboot.
Code:
fastboot devices
does not work in hboot mode.
Click to expand...
Click to collapse
It says 'fastboot' is not recognized as an internal or external command, operable program or batch file.
Arghh!

Are you trying this in fastboot mode? You have to start it with the back button and power button pressed until you see the white screen with the three androids at the bottom, Fastboot highlighted in red letters

BigMrB said:
Are you trying this in fastboot mode? You have to start it with the back button and power button pressed until you see the white screen with the three androids at the bottom, Fastboot highlighted in red letters
Click to expand...
Click to collapse
Yeah, that's what I'm doing. I'm just clueless as to why ADB can't see it? If it could, it would solve my problem... So frustrating.

DesireRoss said:
Yeah, that's what I'm doing. I'm just clueless as to why ADB can't see it? If it could, it would solve my problem... So frustrating.
Click to expand...
Click to collapse
Driver issue?? Try downloading HTC sync to get them...

BigMrB said:
Driver issue?? Try downloading HTC sync to get them...
Click to expand...
Click to collapse
And then uninstall only htc sync, not the drivers. Then reboot computer to apply changes.
To avoid the firmware issue from unrevoked, it's recommend to use unrevoked 3.21:
http://downloads.unrevoked.com/recovery/3.21/reflash_package.exe

Tried what you said and I got this...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Installed android sdk correctly:
http://wiki.cyanogenmod.com/wiki/Howto:_Install_the_Android_SDK

I think you might be right... Trying to install the Google USB drivers and it says 'failed to fetch URL' is there anywhere I can manually download it off the net?

http://dl4.htc.com/RomCode/Source_and_Binaries/USB_driver_20101122_release.zip
You can get them through SDK manager you know?!

BigMrB said:
http://dl4.htc.com/RomCode/Source_and_Binaries/USB_driver_20101122_release.zip
You can get them through SDK manager you know?!
Click to expand...
Click to collapse
This is the Google usb drivers from the SDK... And it says I can't download that repository because of a bad URL..?

Managed to get the USB drivers, but still not being found in ADB... Is this a lost cause?

Booted into recovery and ADB found it...
Any ideas on what to do from here?

DesireRoss said:
Managed to get the USB drivers, but still not being found in ADB... Is this a lost cause?
Click to expand...
Click to collapse
- Check if ONLY HTC SYNC DRIVERS where installed.
- Checked "unknown sources" in applications?
- Set phone to "charge only" and "never ask?"

MatDrOiD said:
- Check if ONLY HTC SYNC DRIVERS where installed.
- Checked "unknown sources" in applications?
- Set phone to "charge only" and "never ask?"
Click to expand...
Click to collapse
Yeah that was all that was installed. Can't check unknown sources or the other as I can't actually get into anything past the first setup stage and then there's nothing... Just need to re-enable my SD card. Fffffffffff.

[Q] Stuck at stock bootloader

I am such a noob and suck at rooting.I got problem during rooting my kindle fire,here's the stories.I try to search all the way in the forum. But,all of it not working. Could you guys help me ?
1) follow root instruction and downloaded KFU
2) successfully installed superuser and go launcher
3) TWRP or CWR or FFF doesn't appear when i reboot back my device to flash custom rom.
4) I tried to run install_driver and run it again and select bootmode menu
5) I choose 3 for recovery.and its brick.luckily i could switch off my kindle.but when i wanna turned it on,its doesnt return to home menu.its stuck at the stock bootloader.
I'm hoping you guys could help me and suggest me the way how to solve it.
I also attach some screen shot of the kindle and my notebooks when i plugged in usb cable in.
Cheers.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

it seems to be in fastboot mode - you have to fix your windows driver for fastboot mode, then you can continue with kfu.
driver (under android phone):
normal & recovery boot: -> android composite adb interface
fastboot: -> android adb interface
detailed explanation here: http://forum.xda-developers.com/showpost.php?p=23747671&postcount=2

b63 said:
it seems to be in fastboot mode - you have to fix your windows driver for fastboot mode, then you can continue with kfu.
driver (under android phone):
normal & recovery boot: -> android composite adb interface
fastboot: -> android adb interface
detailed explanation here: http://forum.xda-developers.com/showpost.php?p=23747671&postcount=2
Click to expand...
Click to collapse
thanks for the advice.I will try it after this and inform you back. Btw, do i need kindle usb cable? for fastboot, since i purchased used kindle so the seller didnt gimme those cable. im currently using sony micro usb cable.

no - every micro usb cable will work

b63 said:
no - every micro usb cable will work
Click to expand...
Click to collapse
i will try to read all of it, try to understand it.and get you know once i already figure it out okay?:cyclops:

i already update my driver.and why in KFU,my device is offline.

21th century apes said:
i already update my driver.and why in KFU,my device is offline.
Click to expand...
Click to collapse
your device seems to be in fastboot mode - you have selected the wrong driver.
normal & recovery boot: -> android composite adb interface
fastboot: -> android adb interface
normal boot -> adb commands YES -> fastboot commands NO
fastboot -> adb commands NO -> fastboot commands YES
recovery -> adb commands YES -> fastboot commands NO
if the device is in fastboot mode "adb status" is allways "offline".
if you have installed the right driver you can check manually
with "fastboot devices" and "fastboot getvar product".
if you get response to this commands you are good to go.

i finally able to install bootloader and twrp.i thought i never make a mistakes.but unfortunately,during time im backing up stock rom,(nandbackup).i check all the boxes (for the left side) and for right side nothing.its running,when completed.its show huge amount of data (around 780 mb).i really think dat tis is normal for backup.in twrp,and video by tom gt,time for backup for 10 minutes.but me,already 5 hour still stuck in twrp.cant go anywhere.

b63 said:
your device seems to be in fastboot mode - you have selected the wrong driver.
normal & recovery boot: -> android composite adb interface
fastboot: -> android adb interface
normal boot -> adb commands YES -> fastboot commands NO
fastboot -> adb commands NO -> fastboot commands YES
recovery -> adb commands YES -> fastboot commands NO
if the device is in fastboot mode "adb status" is allways "offline".
if you have installed the right driver you can check manually
with "fastboot devices" and "fastboot getvar product".
if you get response to this commands you are good to go.
Click to expand...
Click to collapse
bro i hope you can help me solve tiz things off.during backup nand.for the first time.its stuck and as i mention previously its stuck 5 hours but for almost 2 days.its still not finish.am i brick my fire?am i miss out something?later i'll attach picture for your preferences.i think when i already booted up kindle fire,its consider no such big issues.maybe for me that not familiar.

21th century apes said:
bro i hope you can help me solve tiz things off.during backup nand.for the first time.its stuck and as i mention previously its stuck 5 hours but for almost 2 days.its still not finish.am i brick my fire?am i miss out something?later i'll attach picture for your preferences.i think when i already booted up kindle fire,its consider no such big issues.maybe for me that not familiar.
Click to expand...
Click to collapse
if you managed to install bootloader and twrp then you are good to go.
you tried to make a backup of the stock firmware and now the twrp is stuck.
i don't know what options you checked, but this should be no problem.
just hold the power button for ~20sec till it turns off and try again.
check only options which exist on your device then the backup should be done in ~10min.

b63 said:
if you managed to install bootloader and twrp then you are good to go.
you tried to make a backup of the stock firmware and now the twrp is stuck.
i don't know what options you checked, but this should be no problem.
just hold the power button for ~20sec till it turns off and try again.
check only options which exist on your device then the backup should be done in ~10min.
Click to expand...
Click to collapse
Thank you dude.Finally im able to use custom rom.oh,yeah .Btw,i got one last question.Why i cant connect my kindle with computer.instead its show my kindle,its only charging.coz i need to backup all my stuff inside my kindle to computer.

21th century apes said:
Thank you dude.Finally im able to use custom rom.oh,yeah .Btw,i got one last question.Why i cant connect my kindle with computer.instead its show my kindle,its only charging.coz i need to backup all my stuff inside my kindle to computer.
Click to expand...
Click to collapse
that depends on the rom you used. some have a option to enable this function.
the best advise would be to search or ask in the section of the rom you used.
great that it's working now - much fun with your kf

hey dude.im already killed my kindle fire and now its dead.here the stories :
i try to backup all my stuff to my computer.as what you told me before,i try to follow.pick ROM that have usb debugging option for transfering data.okay done.but when i transferring my data from kindle to pc.(i dunno what happen) accidentally my kindle fire hang and i disconnect all the cable hoping that my kindle fire will be okay.but thats the end of my kindle fire.its failed to boot.just plain black screen.when i plugged in the cable.led light blinking.like normal.red and yellow.but there's nothing i can do.i open up device manager on my pc,instead of android phone appeared during time im connecting my phone with pc,its appeared usb mass storage (code 10).device cant start and load.hope you could guide me.anybody.
all guide will be kindly appreaciated.thanks.

How to root Your MICROMAX IN1B (64GB)

First of all, before i start, I'll make this clear, i have done this procedure and rooted my IN1B successfully BUT if anything goes wrong with your device,
I WILL NOT BE RESPONSIBLE FOR BRICKED DEVICES
PreRequisites (Stuff you will need)
So, Let's get into it.
Before Begining, Here are the things you'll need :-
1. A windows PC with all the necessary drivers.
2. ADB and fastboot which you can get from here.
3. A USB C cable, preferably the original one.
4. Make sure your Device is atleast 60% charged.
5. Backup all your data because the very first step will reset your phone.
NOTE- MICROMAX DOES NOT PROVIDE ANY USB DRIVERS. So i had trouble finding the Drivers too, so i recomend you use "Driver booster" it's free, you can get it from here. After installing the driver booster, let it scan and then update all the drivers related to "Android" and "ADB".
That's it, once you are done with all the above points we are good to start.
These are the PATCHED files you need to flash to root your device.
1. Get the files from Here
After you download the files, copy and paste the files in the folder where ADB & Fastboot is located, if you have not changed the Install location, it should be at this directory- C:\Program Files (x86)\Minimal ADB and Fastboot
After you paste all the 3 downloaded files in the ADB folder, the process will now start.
Unlocking the BootLoader
The first step is to unlock the boot loader.
1. Connect your device with a USB C cable.
2. Enable USB debugging from the developer options-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Now run ADB and run this command- adb devices As you run this, something like this should appear on your mobile-
4. Now allow it and Voila!, you are now connected!
5. Now find "OEM Unlocking" and enable it.
6. Now enter this command- adb reboot bootloader As you run this command your device will reboot and show a black screen with only "fastboot" written on it.
7. Now finally Enter this command- fastboot flashing unlock
8. Now it will ask you to confirm, if you change your mind and dont want to root now, press the "Volume-Down" Button or if you want to root, press the "Volume-Up" button.
NOTE- UNLOCK MAY VOID SOFTARE WARRANTY. FOR DETAILS, CHECK THIS (Read 6e)
9. Awesome! Now you have unlocked your boot loader!!
Flashing the Patched Files
Now remember you need the 3 files i linked above, once you get them, paste them in the ADB folder.
Make sure you DON't change the file names.
Let's Start!
1. Run this command- fastboot flash boot patched_boot.img
2. After that, Run this- fastboot --disable-verification flash vbmeta vbmeta.img
3 And he final command, run this- fastboot flash recovery recovery.img
After all these 3 complete succesfully, Just run- fastboot reboot This will start your device normally, go on and set up your device.
1.As you complete the setup, you should see the magisk app-
2. Now the magisk app will ask you to install the full version, click on confirm and it will install the magisk app, you will have to turn on the "Unknown sources" option.
3. Once it is installed, you can ENJOY YOUR ROOTED IN 1B!!
IF YOU NEED ANY HELP, FEEL FREE TO WRITE IT BELOW, OR DM ME ON TELEGRAM- Âkio or DISCORD- Âkio#7134

Akahat27 said:
First of all, before i start, I'll make this clear, i have done this procedure and rooted my IN1B successfully BUT if anything goes wrong with your device,
I WILL NOT BE RESPONSIBLE FOR BRICKED DEVICES
PreRequisites (Stuff you will need)
So, Let's get into it.
Before Begining, Here are the things you'll need :-
1. A windows PC with all the necessary drivers.
2. ADB and fastboot which you can get from here.
3. A USB C cable, preferably the original one.
4. Make sure your Device is atleast 60% charged.
5. Backup all your data because the very first step will reset your phone.
NOTE- MICROMAX DOES NOT PROVIDE ANY USB DRIVERS. So i had trouble finding the Drivers too, so i recomend you use "Driver booster" it's free, you can get it from here. After installing the driver booster, let it scan and then update all the drivers related to "Android" and "ADB".
That's it, once you are done with all the above points we are good to start.
These are the PATCHED files you need to flash to root your device.
1. Get the files from Here
After you download the files, copy and paste the files in the folder where ADB & Fastboot is located, if you have not changed the Install location, it should be at this directory- C:\Program Files (x86)\Minimal ADB and Fastboot
After you paste all the 3 downloaded files in the ADB folder, the process will now start.
Unlocking the BootLoader
The first step is to unlock the boot loader.
1. Connect your device with a USB C cable.
2. Enable USB debugging from the developer options-
View attachment 5326971
3. Now run ADB and run this command- adb devices As you run this, something like this should appear on your mobile-
View attachment 5326979
4. Now allow it and Voila!, you are now connected!
5. Now find "OEM Unlocking" and enable it.
View attachment 5326983
6. Now enter this command- adb reboot bootloader As you run this command your device will reboot and show a black screen with only "fastboot" written on it.
7. Now finally Enter this command- fastboot flashing unlock
8. Now it will ask you to confirm, if you change your mind and dont want to root now, press the "Volume-Down" Button or if you want to root, press the "Volume-Up" button.
NOTE- UNLOCK MAY VOID SOFTARE WARRANTY. FOR DETAILS, CHECK THIS (Read 6e)
9. Awesome! Now you have unlocked your boot loader!!
Flashing the Patched Files
Now remember you need the 3 files i linked above, once you get them, paste them in the ADB folder.
Make sure you DON't change the file names.
Let's Start!
1. Run this command- fastboot flash boot patched_boot.img
2. After that, Run this- fastboot --disable-verification flash vbmeta vbmeta.img
3 And he final command, run this- fastboot flash recovery recovery.img
After all these 3 complete succesfully, Just run- fastboot reboot This will start your device normally, go on and set up your device.
1.As you complete the setup, you should see the magisk app-
View attachment 5326989
2. Now the magisk app will ask you to install the full version, click on confirm and it will install the magisk app, you will have to turn on the "Unknown sources" option.
3. Once it is installed, you can ENJOY YOUR ROOTED IN 1B!!
IF YOU NEED ANY HELP, FEEL FREE TO WRITE IT BELOW, OR DM ME ON TELEGRAM- Âkio or DISCORD- Âkio#7134
Click to expand...
Click to collapse
ON which android version u have done this given me firmware name

pankspoo said:
ON which android version u have done this given me firmware name
Click to expand...
Click to collapse
I did on the android 10 which it initially came with..

How To Guide How to enter Recovery mode on Nokia G10/G20?

Hello everyone. This is my post here on XDA.
I'm using Nokia G20 TA-1365 Model (INDIA).
Let's get to the tutorial.
Prerequisites:
1. A Windows PC.
2. ADB and Fastboot Drivers.
3. Nokia G20 or G10.
Switch off your Nokia G20 device.
Press and Hold Volume down and Power Key together.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After 3 seconds device will boot into fasboot mode.
Now connect your device to your computer and it will appear as Android Bootloader Interface in the device manager as shown below.
Then open CMD or Command Prompt Window as Administrator and type command as "fastboot reboot recovery" and hit enter
Once you hit enter "CMD" will show <Rebooting into recovery> and your phone will reboot and show Android One logo and then show a android logo with exclamation mark No command text right below it.
Keep holding Power key and press Volume up once and you will enter recovery mode. Release the keys.

Just to add to this thread: This device uses fastbootd. To get into fastbootd, you must have the latest adb drivers. Connect your phone and type:
adb reboot fastboot -- not "bootloader". This will get you into the fastbootd screen. From there you can type fastboot reboot recovery which will take you into the normal recovery screen. Hope this helps. Remember -- you must be in fastbootd to accomplish this.

mvikrant97 said:
Hello everyone. This is my post here on XDA.
I'm using Nokia G20 TA-1365 Model (INDIA).
Let's get to the tutorial.
Prerequisites:
1. A Windows PC.
2. ADB and Fastboot Drivers.
3. Nokia G20 or G10.
Switch off your Nokia G20 device.
Press and Hold Volume down and Power Key together.
View attachment 5444075
After 3 seconds device will boot into fasboot mode.
View attachment 5444077
Now connect your device to your computer and it will appear as Android Bootloader Interface in the device manager as shown below.
View attachment 5444081
Then open CMD or Command Prompt Window as Administrator and type command as "fastboot reboot recovery" and hit enter
View attachment 5444087
Once you hit enter "CMD" will show <Rebooting into recovery> and your phone will reboot and show Android One logo and then show a android logo with exclamation mark No command text right below it.
Keep holding Power key and press Volume up once and you will enter recovery mode. Release the keys.
View attachment 5444095
Click to expand...
Click to collapse
Thank you so much love! I hate this phone's stock everything, time to fix that~!
@joegib thank you for adding on about the fastbootd systems. I haven't encountered this before and your post was a lot of help :>

jenneh said:
Thank you so much love! I hate this phone's stock everything, time to fix that~!
@joegib thank you for adding on about the fastbootd systems. I haven't encountered this before and your post was a lot of help :>
Click to expand...
Click to collapse
Can anyone here help unlocking bootloader for g20

Step 11 does not work. I tried it at least 5 times.
Nokia G10 (TA-1334)
Build 00WW_1_260
Android 11

Lebedew said:
O passo 11 não funciona. Tentei pelo menos 5 vezes.
Nokia G10 (TA-1334)
Construir 00WW_1_260
Android 11
Click to expand...
Click to collapse
Também estou na mesma situação

Lebedew said:
Step 11 does not work. I tried it at least 5 times.
Nokia G10 (TA-1334)
Build 00WW_1_260
Android 11
Click to expand...
Click to collapse
Same problem. Have you found a solution?

KeinName_exe said:
Same problem. Have you found a solution?
Click to expand...
Click to collapse
You need to type command "fastboot reboot fastboot" first. Then type "fastboot reboot recovery"
You may also face problem booting your device after factory reset. If you do, you need to boot into fastboot again using steps 1-8 and then type command "fastboot --set-active="b""

Jonny_Zebberty said:
You need to type command "fastboot reboot fastboot" first. Then type "fastboot reboot recovery"
You may also face problem booting your device after factory reset. If you do, you need to boot into fastboot again using steps 1-8 and then type command "fastboot --set-active="b""
Click to expand...
Click to collapse
Thankyou so much! This worked for me.

I've got nokia G10 TA-1334 and best further i went is this. at point 6 best raindance i done with drivers as attached. using this binded with this doesnt giving a result. my phone goes in shadows in fastboot mode and my pc doesnt seeing it. litteraly spend 12 hours just on drivers and nothing.
Can anyone help me go to recovery mode.

crispy_fry said:
I've got nokia G10 TA-1334 and best further i went is this. at point 6 best raindance i done with drivers as attached. using this binded with this doesnt giving a result. my phone goes in shadows in fastboot mode and my pc doesnt seeing it. litteraly spend 12 hours just on drivers and nothing.
Can anyone help me go to recovery mode.
Click to expand...
Click to collapse
crispy_fry said:
same problem with nokia G10 TA-1334.. did you found and solution yet ???????
Click to expand...
Click to collapse

still none

Put device in fastboot mode (vol - power), connect to PC, install adb drivers, in cmd (admin rights) type:
fastboot devices
fastboot reboot fastboot
fastboot reboot recovery

thorn_pl said:
Put device in fastboot mode (vol - power), connect to PC, install adb drivers, in cmd (admin rights) type:
fastboot devices
fastboot reboot fastboot
fastboot reboot recovery
Click to expand...
Click to collapse

CD/
CD adb_folder

thorn_pl said:
CD/
CD adb_folder
Click to expand...
Click to collapse

Thanks!

thorn_pl said:
View attachment 5692381View attachment 5692387
Click to expand...
Click to collapse
any thoughts on this? And any way to unlook the bootloader of G10? The tools I found are not working for the G10. I loved to use Magisk for root but since I'm not able to get into Recovery Mode... btw are there any custom roms for the G10?

I tried to enter fastboot through fastboot, a message was displayed. With the fastboot reboot recovey command, the smartphone simply reboots. Diveces Nokia G21

FP4 stucks after unlock the bootloader

Hello together,
today i tried to install /e/ OS on my new FP4.
I did everything like in the official description:
> ## Unlocking the bootloader
>
> 1. Boot the device
> 2. Enable and connect Wifi
> 3. Enable Developer options
> 4. From developer options, enable OEM unlock
> * Get the unlock code from [this site](https://www.fairphone.com/en/bootloader-unlocking-code-for-fairphone-3/) and enter it
> 5. Reboot on fastboot by running the command in the PC console `adb reboot bootloader`
>
> 6.*Tip:** All the console commands are run on an adb enabled PC and in the `adb` console.
>
> 7. Ask for unlock with `fastboot flashing unlock`
> 8. Approve with <kbd>volume +</kbd> then <kbd>power</kbd>
> * The device proceed with a factory reset, and automatically reboots
At 8 i maybe made a mistake, when you are in the fastboot mode, you can choose different options, i choosed something like FFBM or something like this. Then the device restarted and since that it always shows the "blue dots" like in the beginning but nothing more happens, since hours.
I turned it off and on again, without success.
I can not load the fastboot again via ADB, because the device is not recognized.
If i try to use the volumeUP or VolumeDOWN at the startup, nothing happens and it restarts again after a few seconds.
So there is no way for me to enter the fastboot mode again.
So I have two questions to you, lovely community.
One is, can anybody help me?
Second, can somebody tell me how the different options are called in the fastboot mode, so i can google it and do more research.
THANKS a lot and sorry for my english :slight_sm

Hi,
Are you able to launch the stock rom or are u stuck on bootloop or bootloader page ?
If you can launch the stock rom, enable oem, debugging and unlock bootloader in developper options.
Then connect phone to pc with the cable and type adb devices
see if the phone is recopgnized.
Then adb reboot bootloader and do all steps of the official guide.
If you use Windows I suggest you to put all file to your adb folder, type CD /path/to/folder/
And copy paste all commands at once, this will avoid error of mishandling during fastboot operations.
If you stuck on a "waiting for phone" when you are in fastboot mode, check you driver, or test with a linux machine or see Hulk's solution here
If you stuck on a bootloop just use the key combo to enter bootloader. check on the bootloader is everything is ok (unlock) if not redone steps to unlock bootloader, then flash recovery from /e/ os folder fastboot flash recovery recovery.img
Then enter in recovery use the combo key to have the menu choice between bootloader, recovery... then enter recovery and wipe data...
Then restart the official guide of /e/ os.
You may ask on /e/ os forum too many much more Fairphone user are there and can help you (link i gave you above).

A944684 said:
Hi,
Are you able to launch the stock rom or are u stuck on bootloop or bootloader page ?
If you can launch the stock rom, enable oem, debugging and unlock bootloader in developper options.
Then connect phone to pc with the cable and type adb devices
see if the phone is recopgnized.
Then adb reboot bootloader and do all steps of the official guide.
If you use Windows I suggest you to put all file to your adb folder, type CD /path/to/folder/
And copy paste all commands at once, this will avoid error of mishandling during fastboot operations.
If you stuck on a "waiting for phone" when you are in fastboot mode, check you driver, or test with a linux machine or see Hulk's solution here
If you stuck on a bootloop just use the key combo to enter bootloader. check on the bootloader is everything is ok (unlock) if not redone steps to unlock bootloader, then flash recovery from /e/ os folder fastboot flash recovery recovery.img
Then enter in recovery use the combo key to have the menu choice between bootloader, recovery... then enter recovery and wipe data...
Then restart the official guide of /e/ os.
You may ask on /e/ os forum too many much more Fairphone user are there and can help you (link i gave you above).
Click to expand...
Click to collapse
Hello,
thanks for your reply.
I posted the same comment at the /E/ OS Forum as well.
I Can not load the stock rom, there are only this blue dots circling around for hours:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I can not enter anything else, using ADB is not possible because the device is not recognized and the combination of volumeUP and power or volumeDOWN and power only restarts the device.
Do you have a FP4 and you maybe can tell me which options in the top of the fastboot menu you can choose?
Something like reboot and so on.
I will try the solution in your link in a few hours when i have more time.
Thanks a lot and BR

Bootloader menu options are "start / restart bootloader / recovery mode / power off / boot in ffbm / boot to qmmi"
I don't understand your problem if your bootloader is unlock you must have accesss to bootloader.
Are you sure you didn't relock bootloader before checking the rom is correctly installed ?
Contact /e/ support to have the precise combo key to enter bootloader. sometimes it change from phone to phone.
Does your computer works well with adb and fastboot before ? did you already flash rom ? Maybe a driver is missing or adb/fastboot is not on the last version. You may try with a linux pc to aovid those problem.

From /e/ Os website : https://doc.e.foundation/devices/FP4/install
How to Boot into bootloader mode
This section will be relevant later throughout the guide, when you need to reboot into bootloader mode.
Remove any USB-C cable and turn off your Fairphone 4
Tip: If you cannot turn your device off, remove the battery for about 5 seconds, then put it back in.
Press and hold the Volume Down button.
Insert a USB-C cable connected to the power (can either be a power outlet or a computer).
Release the Volume Down button as soon you boot into bootloader mode
For more details on how to erase the data on your FP4 refer this guide
I just try this and works great : power off the phone (if you can't just remove battery as said), press vol down and plug the usb cable
My phone has the bootloader locked and flashing locked and it works. try this

You are my hero.
I dont know how many times i read that but i was to stupid to do that correctly.
Now i tried it again and it worked well!
Thanks a lot!
Problem solved.
Just for other idiots like me, i choosed the option boot into ffbm into the bootloader menu, this was my mistake.